cd9bc14c8f
cc3200: Add SPI module.
...
Only MASTER mode is supported. Transfer width is configurable to
8, 16 or 32 bits.
2015-03-21 11:26:47 +01:00
c45e641c1d
cc3200: Re-name pybsystick to mpsystick.
2015-03-21 11:21:45 +01:00
f8ee88bbe0
cc3200: Move server methods from WLAN to the network module.
2015-03-19 17:08:25 +01:00
0e96d1b3f1
cc3200: Add parameter to wlan_stop() for custom timeout values.
2015-03-18 21:55:08 +01:00
f382f4442e
cc3200: Fixes and improvements to the SD card driver.
2015-03-18 21:55:02 +01:00
963d7c7ee6
cc3200: Refactor I2C. Remove all references to SLAVE mode.
2015-03-18 21:54:41 +01:00
d3912549a3
cc3200: Improve I2C timeout handling.
2015-03-18 21:54:30 +01:00
005a7f4190
cc3200: Fix extint_enable behaviour when the callback is updated.
2015-03-17 13:26:09 +01:00
181fe5016c
cc3200: Add RTC callback with wake-up from sleep capability.
2015-03-17 13:26:08 +01:00
6de1b39368
cc3200: Make peripheral objects static.
...
This prevents duplication of objects in the sleep list. Also helps
with reducing the code size by ~100 bytes.
2015-03-17 13:26:07 +01:00
fcf6db0695
cc3200: Register pybsd with the sleep module and use pin_config().
2015-03-17 13:26:06 +01:00
98b8568362
cc3200: Assign GPIO10 and GPIO11 to the GPIO peripheral on start-up.
2015-03-17 13:26:05 +01:00
ea43fa104e
cc3200: Remove unneeded functions and add pybsleep_remove() calls.
2015-03-17 13:26:03 +01:00
78d7c45b69
cc3200: Disable all wake sources on start-up.
2015-03-16 00:42:16 +01:00
ed20ac56f7
cc3200: Fix bug in RTC msec register access functions.
2015-03-16 00:42:15 +01:00
0962358026
cc3200: Align SD card driver with new SDK release(1.1.0).
2015-03-16 00:42:13 +01:00
1080802e8f
cc3200: Update socket event handler to align with new SDK(1.1.0) API.
2015-03-16 00:42:11 +01:00
b2cb75efb7
cc3200: Remove double administration of callback objects.
2015-03-16 00:42:09 +01:00
0d0646d915
cc3200: Update HAL to SDK release version 1.1.0.
2015-03-16 00:42:05 +01:00
2c103d5200
cc3200: Rewrite the PRCM RTC functionality methods.
...
This allows to use the On-Chip retention registers for both the
RTC and to share notification flags between the bootloader and the
application. The two flags being shared right now are the "safe boot"
request and the WDT reset cause. we still have 2 more bits free for
future use.
2015-03-14 10:08:47 +01:00
c7fabe1f3e
cc3200: Remove unneeded code from modwlan and optimize startup time.
...
These changes also help reduce the hibernate wake-up time to 1s.
2015-03-14 10:08:43 +01:00
04749e677f
cc3200: Allow separate selection of the power mode in Pin callbacks.
2015-03-12 16:22:17 +01:00
10f7ef0832
cc3200: Keep WLAN enabled during suspend mode.
2015-03-12 16:22:16 +01:00
6ae9383f63
cc3200: Remove WLAN.getmode since it's superseded by WLAN.ifconfig.
2015-03-12 16:22:13 +01:00
37337427c3
cc3200: Trigger a new network scan when WLAN.scan() is called.
2015-03-12 16:22:12 +01:00
b761ed2103
cc3200: Register ADC and I2C with the sleep module.
2015-03-11 22:09:52 +01:00
e9786f40f5
cc3200: Disable WLAN in suspended mode if NW wake is not enabled.
2015-03-11 17:11:10 +01:00
9e44383e3f
cc3200: Add power management framework. Add mpcallback class.
...
Supports suspend and hibernate modes. Waking is possible throug GPIO
and WLAN.
The mpcallback class is generic and can be reused by other classes.
2015-03-11 17:00:33 +01:00
73aee8da54
cc3200: Merge ExtInt class into Pin class.
...
Also add another method to change the pin's interrupt mode
on the fly.
2015-03-11 17:00:28 +01:00
26cbc91373
cc3200: Place functions only used while booting in a special section.
...
Such functions are never used after MicroPython has started, and they
remain in RAM wasting space. Now they are placed in a special section
named "boot" which sits just before the heap, allowing us to extend
the effective heap area up to the new boot section. Right now, this
gives us back ~1K, but in the future, more functions might end up in
there as well.
2015-03-11 16:59:29 +01:00
d226dd2f59
cc3200: Add preliminary low power deep sleep support.
2015-03-11 16:54:09 +01:00
0475de1350
cc3200: Make WDT and HeartBeat constant objects on their own right.
2015-03-11 16:54:05 +01:00
d01060241a
cc3200: Add heartbeat signal on system led.
2015-02-28 19:03:21 +01:00
74589cbeeb
cc3200: Move code that disables/enables servers to wlan_sl_enable().
2015-02-26 11:19:15 +01:00
7a074a14ce
cc3200: Implement safe boot pin and system led behaviour.
...
The safe boot pin, when pulled high during reset rolls back the
firmware to the "factory" image and skips execution of 'boot.py'
and 'main.py'. This is useful to recover from a crash condition.
The system led is used mostly to signal errors.
2015-02-25 23:17:17 +01:00
11aa6ba456
cc3200: Add WDT functionality as part of the pyb module.
...
Also improve pybsd, and make it save it's pin configuration.
This is a necessary step towards supporting the CC3200 low
power deep sleep (LPDS) mode.
2015-02-25 11:37:29 +01:00
70b3160871
cc3200: Introduce MICROPY_PORT_HAS_TELNET and MICROPY_PORT_HAS_FTP.
...
These definitions help on making modwlan.c usable by other ports
with the CC3100.
2015-02-23 15:02:57 +01:00
379a3fa305
cc3200: Change UART.print() to make it consistent with the rest.
2015-02-23 15:02:55 +01:00
88b7f52ebb
cc3200: Replace WLAN.get_ip() with WLAN.ifconfig().
...
Also change other methods' names to make them consistent.
2015-02-23 15:02:55 +01:00
44bb616b53
cc3200: Add simplelink non-os task calls.
2015-02-22 18:59:50 +01:00
4bfc491753
cc3200: Add wlan_urn() thanks to Nadim El-Fata and Bryan Morrissey.
2015-02-22 18:43:01 +01:00
33ddb566a7
cc3200: Remove dependencies from FreeRTOS.
...
Use the simplelink wrappers instead. This is one step further
towards having a single module for the cc3200 and the cc3100.
2015-02-22 17:50:50 +01:00
92ea99a0fb
cc3200: Add support for connecting to WEP secured networks.
2015-02-21 22:27:54 +01:00
18605b36dc
cc3200: Rename SD.config() to SD.config_pins().
2015-02-21 22:27:48 +01:00
7102e51506
cc3200: Add UART __del__ method.
2015-02-21 22:27:44 +01:00
a7208bcc43
cc3200: Remove sd paths from sys path when disabling the sd card.
2015-02-21 22:27:39 +01:00
4a23a01945
cc3200: Add explicit py/ path-prefix for py includes.
...
This is how it should be, so one knows exactly where the includes are
coming from.
2015-02-21 18:58:43 +00:00
59d14914cd
cc3200: Correct pybsd_config() params retrieval.
2015-02-21 14:26:38 +01:00
c020109cfa
cc3200: Add SD module and disable SD card support for the LAUNCHXL.
2015-02-21 14:19:40 +01:00
6b21c3fdd6
cc3200: Refactor UART and I2C object creation.
...
I2C objects can be freed by the GC and a __del__ method is provided
in order to de-init the peripheral prior to being garbage collected.
UART objects are now added to a local list and this list is now part
of the VM_STATE.
2015-02-20 16:41:55 +01:00
danicampora
Damien George