The delay_half parameter must be specified by the port to set up the
timing of the software SPI. This allows the port to adjust the timing
value to better suit its timing characteristics, as well as provide a
more accurate printing of the baudrate.
There is no need to take src_len and dest_len arguments. The case of
reading-only with a single output byte (originally src_len=1, dest_len>1)
is now handled by using the output buffer as the input buffer, and using
memset to fill the output byte into this buffer. This simplifies the
implementations of the spi_transfer protocol function.
machine.POWER_ON is renamed to machine.PWRON_RESET to match other
reset-cause constants that all end in _RESET. The cc3200 port keeps a
legacy definition of POWER_ON for backwards compatibility.
When dealing with a board which controls chip reset with UART's DTR/RTS,
we never see REASON_DEFAULT_RST (0), only REASON_EXT_SYS_RST (6). However,
trying a "raw" module with with just TXD/RXD UART connection, on power up
it has REASON_DEFAULT_RST as a reset reason.
According to the Arduino ESP8266 implementation the first argument to the
wifi scan callback is actually a bss_info pointer. This patch fixes the
iteration over this data so the first 2 entries are no longer skipped.
Fixes issue #2372.
Interrupts during neopixel_write causes timing problems and therefore
wrong light patterns. Switching off IRQs should help to keep the strict
timing schedule.
This new config option allows to control whether MicroPython uses its own
internal printf or not (if not, an external one should be linked in).
Accompanying this new option is the inclusion of lib/utils/printf.c in the
core list of source files, so that ports no longer need to include it
themselves.
modpybhspi now does the needed multiplexing, calling out to modpybspi
(bitbanging SPI) for suitable peripheral ID's. modmachinespi (previous
multiplexer class) thus not needed and removed.
modpybhspi also updated to following standard SPI peripheral naming:
SPI0 is used for FlashROM and thus not supported so far. SPI1 is available
for users, and thus needs to be instantiated as:
spi = machine.SPI(1, ...)
This extra forward slash for the starting-point directory is unnecessary
and leads to additional slashes on Max OS X which mean that the frozen
files cannot be imported.
Fixes#2374.
The OneWire class is now in its own onewire.py module, and the temperature
sensor class is in its own ds18x20.py module. The latter is renamed to
DS18X20 to reflect the fact that it will support both the "S" and "B"
variants of the device.
These files are moved to the modules/ subdirectory to take advantage of
frozen bytecode.
This is an object-oriented approach, where uos is only a proxy for the
methods on the vfs object. Some internals had to be exposed (the STATIC
keyword removed) for this to work.
Fixes#2338.
This type was used only for the typedef of mp_obj_t, which is now defined
by the object representation. So we can now remove this unused typedef,
to simplify the mpconfigport.h file.
That apparently will only help folks who read the docs on how to disable,
but could use a quick reminder straight in boot.py. For the developers,
it's important to have debug logging enabled in development branch
(master).
Paul Sokolovsky
Damien George
Alex March
Torsten Wagner
Delio Brignoli
Radomir Dopieralski