Paul Sokolovsky
|
22ca5390f7
|
docs/esp8266/quickref: Polish Pin.on()/off() examples.
|
2017-06-02 21:08:23 +03:00 |
|
Paul Sokolovsky
|
272a5d95e0
|
docs/esp8266: Consistently replace Pin.high/low methods with .on/off.
|
2017-05-30 07:36:25 +03:00 |
Damien George
|
daa5ba5629
|
docs/esp8266/quickref: Add links from quickref page to machine classes.
|
2017-04-18 15:28:18 +10:00 |
puuu
|
933198c55f
|
docs/*/quickref.rst: Use new semantics of ticks_diff()
|
2016-11-08 02:01:05 +03:00 |
|
Paul Sokolovsky
|
5c3d75c937
|
docs/esp8266: Update for new WebREPL setup procedure.
|
2016-11-06 10:02:33 +03:00 |
|
Paul Sokolovsky
|
b4df3e74e1
|
docs/esp8266/quickref: Further improvements for SPI subsections.
Consistency and formatting.
|
2016-09-04 23:31:05 +03:00 |
|
Paul Sokolovsky
|
20da9064d7
|
docs/esp8266/quickref: Update information on SPI classes.
SPI(1) is not used for hardware SPI. Few more details are provided.
|
2016-09-04 21:13:55 +03:00 |
|
Damien George
|
76dcaddc0f
|
docs/esp8266/quickref: Add internal links to docs for some modules.
|
2016-08-29 17:40:36 +10:00 |
|
Damien George
|
13c5a228c9
|
docs/esp8266: Update quickref and tutorial for OneWire/DS18X20 driver.
|
2016-08-29 12:52:50 +10:00 |
Radomir Dopieralski
|
ed0a06a93f
|
docs/esp8266/quickref: Fix and update the SPI docs
Use the `SPI` factory function in the examples, and use
proper baud rate of 80 000 000.
|
2016-08-28 23:14:45 +10:00 |
|
Radomir Dopieralski
|
8e7dfea803
|
esp8266/modpybhspi: Add a HSPI module for hardware SPI support
This module uses ESP8266's SPI hardware, which allows much higher
speeds. It uses a library from
https://github.com/MetalPhreak/ESP8266_SPI_Driver
|
2016-08-19 21:19:59 +03:00 |
|
Paul Sokolovsky
|
f84dda7111
|
docs/esp8266/quickref: Link to installation instructions.
|
2016-08-07 17:46:27 +03:00 |
Mike Causer
|
b4564841b6
|
docs: Add DHT to ESP8266 Quick Ref and Tutorial
|
2016-08-01 14:39:57 +03:00 |
|
Paul Sokolovsky
|
d8cc51ea2b
|
docs/esp8266/quickref: Update WebREPL section for 1.8.1 release.
WebREPL is much more stable now.
|
2016-06-02 20:11:40 +03:00 |
|
Paul Sokolovsky
|
fdf45a718b
|
esp8266/quickref: Use local image of Adafruit Huzzah board.
Using remote image causes problems with tools (partly because the image
is semi-firewalled and can't be accessed by arbitrary tools).
|
2016-06-01 23:11:49 +03:00 |
misterdanb
|
a0a08b4be1
|
esp8266: Add APA102 serial individually controllable LEDs support.
APA102 is a new "smart LED", similar to WS2812 aka "Neopixel".
|
2016-05-19 22:29:11 +03:00 |
|
Radomir Dopieralski
|
ccb00b7724
|
docs/esp8266/quickstart: remove i2c examples with stop=False
Since the ``stop`` parameter has been dropped.
|
2016-05-14 00:02:02 +02:00 |
|
Radomir Dopieralski
|
e89413e9b0
|
docs/esp8266/quickref: New way to get MAC address
|
2016-05-10 00:31:57 +02:00 |
|
Paul Sokolovsky
|
d46cd02d95
|
docs/esp8266/quickref: Add info about WebREPL.
|
2016-05-01 11:41:46 +03:00 |
|
Damien George
|
348edad888
|
docs/esp8266: Update quickref to reflect changes to 1-wire and NeoPixel.
|
2016-04-28 14:31:37 +01:00 |
|
Damien George
|
fcc9d43c6d
|
docs/esp8266: Add info about using deep-sleep mode to quickref.
|
2016-04-21 12:01:50 +01:00 |
|
Paul Sokolovsky
|
e4cb7c6158
|
docs/esp8266/quickref: Add note about physical vs logical pin numbers.
|
2016-04-05 16:30:51 +03:00 |
|
Paul Sokolovsky
|
0cb10b5220
|
docs/esp8266/quickref: Add note about GPIO16.
|
2016-03-25 16:48:15 +02:00 |
|
Paul Sokolovsky
|
159f1aaca8
|
docs/esp8266/quickref: Note that timers supported are virtual ones.
|
2016-03-25 16:44:13 +02:00 |
|
Damien George
|
2466cb67f8
|
docs/esp8266: Update quick reference: i2c.readfrom and neopixel example.
|
2016-03-16 13:37:39 +00:00 |
|
Damien George
|
6b80ebe32e
|
docs/esp8266: Fix indent errors, typos, and add info about REPL UART.
|
2016-03-09 13:01:32 +00:00 |
|
Damien George
|
4b6077b3fe
|
docs/esp8266: Minor tweaks to quickref, Timer and I2C classes.
|
2016-03-09 11:02:38 +00:00 |
|
Damien George
|
809fbeefb7
|
docs: Add esp8266 quick reference page, with basic info.
|
2016-03-08 23:06:15 +00:00 |