The idea is that these tests can be run with just a test server running
on a test host, with device under test connecting to it, instead of
requiring Internet connection for testing.
Such setup is however WIP, and some tests in net_hosted/ are so far
written to connect to Internet, as there're not test server written
yet. This is expected to evolve over time.
GC finalization should be enabled for modlwip, or it may lead to GC
problems with socket objects. This decreases usable heap size from
36288 to 35968 (-320) bytes.
It belongs with the other pin config functions in machine_pin.c. Also,
esp_mphal.c is put in iRAM so this change saves about 300 bytes of iRAM
(and mp_hal_pin_open_drain is not a time critical function so doesn't
need to be in iRAM).
These drivers can now be used by any port (so long as that port has the
_onewire driver from extmod/modonewire.c).
These drivers replace the existing 1-wire and DS18X20 drivers in the
drivers/onewire directory. The existing ones were pyboard-specific and
not very efficient nor minimal (although the 1-wire driver was written in
pure Python it only worked at large enough CPU frequency).
This commit brings backwards incompatible API changes to the existing
1-wire drivers. User code should be converted to use the new drivers, or
check out the old version of the code and keep a local copy (it should
continue to work unchanged).
The 1-wire bus is defined with fixed timings so there should be no need to
change them dynamically at runtime. Making the timings fixed saves about
270 bytes of code and 20 bytes of RAM.
The reason it was separated is so that the low-level code could be put in
iRAM, for timing reasons. But:
1. Tests show that it's not necessary to have this code in iRAM for it to
function correctly, and taking it out of iRAM reclaims some of that precious
resource. Furthermore, even though these functions were in iRAM there were
some functions that it called (eg pin get/set functions) which were not in
iRAM, so partially defeated the purpose of putting the 1-wire code in iRAM.
2. It's easier to reuse this 1-wire code in other ports if it's in a single
file.
3. If it turns out that certain code does need to be in iRAM then one can
use the MP_FASTCODE macro to do that.
Previous to this patch, a label with value "0" was used to indicate an
invalid label, but that meant a wasted word (at slot 0) in the array of
label offsets. This patch adjusts the label indices so the first one
starts at 0, and the maximum value indicates an invalid label.
This patch fixes a bug whereby the Python stack was not correctly reset if
there was a break/continue statement in the else black of an optimised
for-range loop.
For example, in the following code the "j" variable from the inner for loop
was not being popped off the Python stack:
for i in range(4):
for j in range(4):
pass
else:
continue
This is now fixed with this patch.
This attempts to bootstrap network tests for MicroPython. This commits
sets test/net_inet/ as place for tests which require access to wide
Internet. They aren't intended to be run as part of the main testsuite,
instead to be run manually on demand.
test_tls_sites.py in particular check that it's possible to establish
SSL/TLS connection to select sites on the Internet: few references ones,
plus those for which problems were reported, and resolved.
The CC3100 only allows to set a timeout for receiving data, not for accept,
connect or send. But it can set non-blocking for all these operations and
this patch uses that feature to implement socket timeout in terms of non-
blocking behaviour combined with a loop.
This method follows the new HW API and allows to set a hard or soft IRQ
callback when a Pin has a level change. It still remains to make this
method return a IRQ object.
In CPython 3.4 this raises a SyntaxError. In CPython 3.5+ having a
positional after * is allowed but uPy has the wrong semantics and passes
the arguments in the incorrect order. To prevent incorrect use of a
function going unnoticed it is important to raise the SyntaxError in uPy,
until the behaviour is fixed to follow CPython 3.5+.
These implementations are incorrect (eg f2d and d2f don't handle special
values like 0.0) and proper versions can be provided by libgcc (or
equivalent depending on the toolchain).
libgcc is now linked with the stmhal port so that library will provide
these functions from now on.
The latest fashion is pushing certificate sub-chains, instead of a single
certificate, during TLS handshake. These are pushed via single TLS record
and effectively put minimum size limit on TLS record buffer. Recently,
these commonly grew over 4K, so we have little choice but to adjust.
This patch fixes 2 things when printing a floating-point number that
requires rounding up of the mantissa:
- retain the correct precision; eg 0.99 becomes 1.0, not 1.00
- if the exponent goes from -1 to 0 then render it as +0, not -0
Baremetal ports standardized on providing localtime(). localtime() offers
more functionality, in particular, strftime() can be completely implemented
in Python with localtime().
Paul Sokolovsky
Damien George