Commit Graph

13822 Commits

Author SHA1 Message Date
David Lechner 68f46342aa shared/runtime/pyexec: Use MP_REGISTER_ROOT_POINTER().
This uses MP_REGISTER_ROOT_POINTER() to register repl_line
instead of using a conditional inside of mp_state_vm_t.

Signed-off-by: David Lechner <david@pybricks.com>
2022-07-18 13:52:01 +10:00
David Lechner 7e4b205cb0 py/mpstate: Drop MICROPY_PORT_ROOT_POINTERS from mp_state_vm_t.
All in-tree uses of MICROPY_PORT_ROOT_POINTERS have been replaced with
MP_REGISTER_ROOT_POINTER(), so now we can remove both
MICROPY_PORT_ROOT_POINTERS and MICROPY_BOARD_ROOT_POINTERS from the code
and remaining config files.

Signed-off-by: David Lechner <david@pybricks.com>
2022-07-18 13:51:16 +10:00
David Lechner ccda7686a4 zephyr: Use MP_REGISTER_ROOT_POINTER().
This uses MP_REGISTER_ROOT_POINTER() to register port-specific root
pointers for the zephyr port.

Signed-off-by: David Lechner <david@pybricks.com>
2022-07-18 13:50:35 +10:00
David Lechner 186be074a7 teensy/teensy_hal: Use MP_REGISTER_ROOT_POINTER().
This uses MP_REGISTER_ROOT_POINTER() to register pyb_stdio_uart and removes
the same from mpconfigport.h.

Signed-off-by: David Lechner <david@pybricks.com>
2022-07-18 13:50:35 +10:00
David Lechner 2d8589f1a5 teensy/mpconfigport: Drop unused root pointers.
pin_class_mapper and pin_class_map_dict are not used in the teensy port and
can be removed.

Signed-off-by: David Lechner <david@pybricks.com>
2022-07-18 13:50:34 +10:00
David Lechner 816e4537f2 stm32: Use MP_REGISTER_ROOT_POINTER().
This uses MP_REGISTER_ROOT_POINTER() to register all port-specific root
pointers in the stm32 port.

Signed-off-by: David Lechner <david@pybricks.com>
2022-07-18 13:50:34 +10:00
David Lechner ffa22b8f97 rp2: Use MP_REGISTER_ROOT_POINTER().
This uses MP_REGISTER_ROOT_POINTER() to register all port-specific root
pointers in the rp2 port.

Signed-off-by: David Lechner <david@pybricks.com>
2022-07-18 13:50:34 +10:00
David Lechner 575fa61c6d renesas-ra: Use MP_REGISTER_ROOT_POINTER().
This uses MP_REGISTER_ROOT_POINTER() to register all port-specific root
pointers in the renesas-ra port.

Signed-off-by: David Lechner <david@pybricks.com>
2022-07-18 13:50:34 +10:00
David Lechner f8805e2416 renesas-ra/mpconfigport: Drop pyb_hid_report_desc root pointer.
pyb_hid_report_desc is not used anywhere in the renesas-ra port (probably
was copied from stm32 port).

Signed-off-by: David Lechner <david@pybricks.com>
2022-07-18 13:50:34 +10:00
David Lechner c09e31dabb pic16bit/pic16bit_mphal: Use MP_REGISTER_ROOT_POINTER().
This uses MP_REGISTER_ROOT_POINTER() to register keyboard_interrupt_obj
and removes the same from mpconfigport.h.

Signed-off-by: David Lechner <david@pybricks.com>
2022-07-18 13:50:34 +10:00
David Lechner 8a69c54211 nrf: Use MP_REGISTER_ROOT_POINTER().
This uses MP_REGISTER_ROOT_POINTER() to register all port-specific root
pointers for the nrf port.

Signed-off-by: David Lechner <david@pybricks.com>
2022-07-18 13:50:34 +10:00
David Lechner a316a8fdb3 mimxrt: Use MP_REGISTER_ROOT_POINTER().
This uses MP_REGISTER_ROOT_POINTER() to register all port-specific root
pointers in the mimxrt port.

Signed-off-by: David Lechner <david@pybricks.com>
2022-07-18 13:50:34 +10:00
David Lechner e2d4db96da esp8266: Use MP_REGISTER_ROOT_POINTER().
This uses MP_REGISTER_ROOT_POINTER() to register all port-specific root
pointers in the esp2866 port.

Signed-off-by: David Lechner <david@pybricks.com>
2022-07-18 13:50:34 +10:00
David Lechner b63282c361 esp32: Use MP_REGISTER_ROOT_POINTER().
This uses MP_REGISTER_ROOT_POINTER() to register all root pointers in the
esp32 port.

Signed-off-by: David Lechner <david@pybricks.com>
2022-07-18 13:50:34 +10:00
David Lechner 226e969ad3 cc3200: Use MP_REGISTER_ROOT_POINTER().
This uses MP_REGISTER_ROOT_POINTER() to register all port-specific root
pointers for the cc3200 port.

Signed-off-by: David Lechner <david@pybricks.com>
2022-07-18 13:50:34 +10:00
David Lechner 095ad87adf cc3200/mpconfigport: Remove mp_const_user_interrupt.
mp_const_user_interrupt was listed as a root pointer but not used anywhere
in the code base, so it can be removed.

Signed-off-by: David Lechner <david@pybricks.com>
2022-07-18 13:50:34 +10:00
David Lechner a3703584fe extmod/modnetwork: Use MP_REGISTER_ROOT_POINTER().
This uses MP_REGISTER_ROOT_POINTER() to register mod_network_nic_list and
removes the same from all mpconfigport.h.

Signed-off-by: David Lechner <david@pybricks.com>
2022-07-18 13:50:25 +10:00
David Lechner e531b72b56 extmod/nimble: Use MP_REGISTER_ROOT_POINTER().
This uses MP_REGISTER_ROOT_POINTER() to register bluetooth_nimble_memory
and bluetooth_nimble_root_pointers and removes the same from all
mpconfigport.h.

Signed-off-by: David Lechner <david@pybricks.com>
2022-07-18 13:50:14 +10:00
David Lechner 8fa6191f95 extmod/btstack: Use MP_REGISTER_ROOT_POINTER().
This uses MP_REGISTER_ROOT_POINTER() to register
bluetooth_btstack_root_pointers and removes the same from all
mpconfigport.h.

Signed-off-by: David Lechner <david@pybricks.com>
2022-07-18 13:49:51 +10:00
David Lechner ac86e8449a drivers/ninaw10/nina_wifi_bsp: Use MP_REGISTER_ROOT_POINTER().
This uses MP_REGISTER_ROOT_POINTER() to register mp_wifi_spi, mp_wifi_timer
and mp_wifi_sockpoll_list and removes the same from all mpconfigport.h.

Signed-off-by: David Lechner <david@pybricks.com>
2022-07-18 13:49:28 +10:00
David Lechner e5631d9595 unix/alloc: Use MP_REGISTER_ROOT_POINTER() for mmap_region_head.
This uses MP_REGISTER_ROOT_POINTER() to register mmap_region_head and
removes the same from mpconfigport.h.

Signed-off-by: David Lechner <david@pybricks.com>
2022-07-18 13:49:09 +10:00
David Lechner 81dbea1ce3 shared/readline: Use MP_REGISTER_ROOT_POINTER().
This uses MP_REGISTER_ROOT_POINTER() to register the readline_history root
pointer array used by shared/readline.c and removes the registration from
all mpconfigport.h files.

This also required adding a new MICROPY_READLINE_HISTORY_SIZE config option
since not all ports used the same sized array.

Signed-off-by: David Lechner <david@pybricks.com>
2022-07-18 13:48:49 +10:00
David Lechner fc3d7ae11b py/make_root_pointers: Add MP_REGISTER_ROOT_POINTER parser/generator.
This adds new compile-time infrastructure to parse source code files for
`MP_REGISTER_ROOT_POINTER()` and generates a new `root_pointers.h` header
file containing the collected declarations.  This works the same as the
existing `MP_REGISTER_MODULE()` feature.

Signed-off-by: David Lechner <david@pybricks.com>
2022-07-18 13:48:23 +10:00
Yonatan Goldschmidt a8d78cc398 py/obj: Add debug-only runtime checks to mp_obj_is_type().
Zero effect on non debug builds, and also usually optimized out even in
debug builds as mp_obj_is_type() is called with a compile-time known type.
I'm not sure we even have dynamic uses of mp_obj_is_type() at the moment,
but if we ever will they will be protected from now on.

Signed-off-by: Yonatan Goldschmidt <yon.goldschmidt@gmail.com>
2022-07-18 11:17:49 +10:00
Yonatan Goldschmidt 2a6ba47110 py/obj: Add static safety checks to mp_obj_is_type().
Commit d96cfd13e3 introduced a regression by breaking existing
users of mp_obj_is_type(.., &mp_obj_bool).  This function (and associated
helpers like mp_obj_is_int()) have some specific nuances, and mistakes like
this one can happen again.

This commit adds mp_obj_is_exact_type() which behaves like the the old
mp_obj_is_type().  The new mp_obj_is_type() has the same prototype but it
attempts to statically assert that it's not called with types which should
be checked using mp_obj_is_type().  If called with any of these types: int,
str, bool, NoneType - it will cause a compilation error.  Additional
checked types (e.g function types) can be added in the future.

Existing users of mp_obj_is_type() with the now "invalid" types, were
translated to use mp_obj_is_exact_type().

The use of MP_STATIC_ASSERT() is not bulletproof - usually GCC (and other
compilers) can't statically check conditions that are only known during
link-time (like variables' addresses comparison).  However, in this case,
GCC is able to statically detect these conditions, probably because it's
the exact same object - `&mp_type_int == &mp_type_int` is detected.
Misuses of this function with runtime-chosen types (e.g:
`mp_obj_type_t *x = ...; mp_obj_is_type(..., x);` won't be detected.  MSC
is unable to detect this, so we use MP_STATIC_ASSERT_NOT_MSC().

Compiling with this commit and without the fix for d96cfd13e3 shows
that it detects the problem.

Signed-off-by: Yonatan Goldschmidt <yon.goldschmidt@gmail.com>
2022-07-18 11:17:46 +10:00
Yonatan Goldschmidt 6670281472 py/misc: Add MP_STATIC_ASSERT_NOT_MSC().
To be used in cases where the condition of the assert does not compile
under msvc.

Signed-off-by: Yonatan Goldschmidt <yon.goldschmidt@gmail.com>
2022-07-18 11:11:00 +10:00
robert-hh cca2305211 nrf/drivers/usb: Fix reading of a single USB CDC character. 2022-07-17 00:13:15 +10:00
robert-hh be6f0f3b3b nrf/mpconfigport: Call tud_task() in MICROPY_EVENT_POLL_HOOK.
So that the interrupt character can interrupt a long-running loop, like a
sleep.
2022-07-17 00:12:34 +10:00
robert-hh c985a0b514 nrf/drivers/usb: Add a tud_cdc_rx_cb() callback to check interrupt char. 2022-07-17 00:12:03 +10:00
robert-hh 60539ea162 nrf/drivers/usb: Probe for interrupt char in USB CDC task.
And ensure that the input queue is empty when scheduling the interrupt.
2022-07-17 00:11:14 +10:00
Stuart Langridge 30c7f1790b nrf/drivers/bluetooth: Handle PHY_UPDATE messages, used in Bluetooth 5.
Some devices, such as the LightBlue BTLE app on iOS, try to use Bluetooth 5
when connecting to a device.  This means that they will send a
BLE_GAP_EVT_PHY_UPDATE_REQUEST message to shift to a new physical layer.
If this event isn't handled, LightBlue (and likely other Bluetooth 5.0
central devices) will try to connect and then fail, staying in
"Connecting..." state forever.  This message should be replied to with
sd_ble_gap_phy_update, as documented in
drivers/bluetooth/s140_nrf52_6.1.1/s140_nrf52_6.1.1_API/include/ble_gap.h.

This commit handles the event.  LightBlue can now successfully connect to a
BTLE device on a P10059 nRF52840 dongle running MicroPython.  Two other
related events have logging added in case they are needed in the future.
2022-07-16 23:46:30 +10:00
iabdalkader 262f4a4855 nrf/mpconfigport: Remove obsolete module declarations.
External module declarations are no longer used/needed after the
introduction of MP_REGISTER_MODULE.
2022-07-15 22:54:25 +10:00
Lars Haulin 5bf3765631 py/objnamedtuple: Fix segfault with empty namedtuple.
The empty tuple is usually a constant object, but named tuples must be
allocated to allow modification.  Added explicit allocation to fix this.

Also added a regression test to verify creating an empty named tuple works.

Fixes issue #7870.

Signed-off-by: Lars Haulin <lars.haulin@gmail.com>
2022-07-13 16:25:35 +10:00
iabdalkader 2076f2efcc tools/autobuild: Add nrf port to autobuild scripts. 2022-07-13 16:19:22 +10:00
Jim Mussared 74794d42b8 rp2/CMakeLists: Use armv6m mpy-cross arch for rp2.
Commit 0e28a1f0e5 made it possible to set
-march=armv6m.  It needs to be used when freezing for rp2.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2022-07-12 23:50:19 +10:00
Damien George b878fc042f py/vm: Consistently indent #if guards to match the code they surround.
Signed-off-by: Damien George <damien@micropython.org>
2022-07-12 22:48:55 +10:00
Damien George 893a5c8341 py/vm: In YIELD_FROM opcode, expand helper macros and remove them.
The GENERATOR_EXIT_IF_NEEDED macro is only used once and it's easier to
read and understand the code if this macro body is written in the code.
Then the comment just before it makes more sense.

Signed-off-by: Damien George <damien@micropython.org>
2022-07-12 22:48:07 +10:00
Damien George d84220b8c6 py/vm: Remove check for ip being NULL when handling StopIteration.
This check for code_state->ip being NULL was added in
a7c02c4538 with a commit message that "When
generator raises exception, it is automatically terminated (by setting its
code_state.ip to 0)".  It was also added without any tests to test for this
particular case.  (The commit did mention that CPython's test_pep380.py
triggered a bug, but upon re-running this test it did not show any need for
this NULL check of code_state->ip.)

It is true that generators that have completed (either by running to their
end or raising an exception) set "code_state.ip = 0".  But there is an
explicit check at the start of mp_obj_gen_resume() to return immediately
for any attempt to resume an already-stopped generator.  So the VM can
never execute a generator with NULL ip (and this was true at the time of
the above-referenced commit).

Furthermore, the other parts of the VM just before and after this piece
of code do require (or at least assume) code_state->ip is non-NULL.

Signed-off-by: Damien George <damien@micropython.org>
2022-07-12 18:17:44 +10:00
David Lechner 093c4b6b26 unix/main: Restore tty settings on nlr_jump_fail().
Since nlr_jump_fail() exits the process, it can leave the terminal in raw
mode which means characters are not echoed.  Fix this by restoring the
original terminal mode.

Signed-off-by: David Lechner <david@pybricks.com>
2022-07-12 17:20:37 +10:00
Jim Mussared 9714a0ead5 py/emitnative: Fix STORE_ATTR viper code-gen when value is not a pyobj.
There was a missing call to MP_F_CONVERT_NATIVE_TO_OBJ.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2022-07-12 17:18:27 +10:00
Phil Howard e1282556e8 shared/netutils/dhcpserver: Match default DNS to server IP.
Change the default DNS to match the gateway IP of a board running in access
point mode (or otherwise acting as a "server").

This fixes the rather meaningless use of "8.8.8.8" as the default DNS
server address offered up to access point clients via the DHCP server.
Since most devices wont be able to proxy access to the real "8.8.8.8".

It allows for a DNS responder to run and provide a catchall response for
captive portal functionality, or just a quality-of-life response to a
friendly URL for access-point based configuration and other applications.

Signed-off-by: Phil Howard <phil@gadgetoid.com>
2022-07-12 17:15:31 +10:00
Peter Harper 9f0f7e34c7 rp2/mphalport: Fix missing storage_read_blocks symbol in debug build.
When building `make BOARD=PICO_W DEBUG=1` the cyw43-driver requires
storage_read_blocks().

Signed-off-by: Peter Harper <peter.harper@raspberrypi.com>
2022-07-12 16:56:38 +10:00
Jim Mussared c5563aa024 rp2/mpconfigport: Make networking options consistent across boards.
Enable the same set of networking features on boards with wifi/ethernet.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2022-07-12 16:28:44 +10:00
Jim Mussared 662dc8602b rp2: Make atomic sections suspend the other core (if active).
When a flash write/erase is in progress, we need to ensure that the
other core cannot be using XIP.

This also implements MICROPY_BEGIN_ATOMIC_SECTION as a full mutex, which
is necessary as it's used to syncronise access to things like the scheduler
queue.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2022-07-12 16:20:21 +10:00
Jim Mussared daff597753 rp2: Run USB stack task exclusively from core 0.
The goal is to avoid a situation where core 1 is shut down while holding
the tinyusb spinlock, which could happen during soft reset if
mp_thread_deinit is called while core1 is running tud_task().

This also fixes a latent race where the two cores are competing to
decrement and compare `vm_hook_divisor` with no mem fence or atomic
protection -- only core0 will now do this.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2022-07-12 16:17:19 +10:00
Jim Mussared 158f1794e8 py/vm: Document internal SELECTIVE_EXC_IP option.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2022-07-12 16:13:14 +10:00
Jim Mussared 8db99f11a7 py/scheduler: De-inline and fix race with pending exception / scheduler.
The optimisation that allows a single check in the VM for either a pending
exception or non-empty scheduler queue doesn't work when threading is
enabled, as one thread can clear the sched_state if it has no pending
exception, meaning the thread with the pending exception will never see it.

This removes that optimisation for threaded builds.

Also fixes a race in non-scheduler builds where get-and-clear of the
pending exception is not protected by the atomic section.

Also removes the bulk of the inlining of pending exceptions and scheduler
handling from the VM. This just costs code size and complexity at no
performance benefit.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2022-07-12 15:54:33 +10:00
Damien George 1329155b96 stm32/sdram: Include boardctrl.h for fatal-error handler.
Signed-off-by: Damien George <damien@micropython.org>
2022-07-11 14:47:46 +10:00
Damien George 9af6a275dd stm32/boardctrl: Allow boards to override fatal-error handler.
To override it a board must define MICROPY_BOARD_FATAL_ERROR to a function
that takes a string message and does not return.

Signed-off-by: Damien George <damien@micropython.org>
2022-07-08 23:47:29 +10:00
Damien George 9f8087b448 esp8266/boards: Enable reverse-special-methods on GENERIC board.
It increases the firmware size by 292 bytes.

Addresses issue #5897.

Signed-off-by: Damien George <damien@micropython.org>
2022-07-08 23:06:16 +10:00