5161239c9f
cc3200: time.sleep() now receives seconds, like CPython.
2015-07-02 17:23:22 +02:00
9a65fa304c
cc3200: Add modussl, ssl sockets subclassed from normal sockets.
...
Stream methods were added to normal sockets as in the unix port.
2015-07-02 16:30:00 +02:00
7c1c9af5d4
cc3200: Code clean-up on pybpin.
2015-07-02 16:29:51 +02:00
4f8eeaedef
cc3200: Set WLAN date/time via the rtc.datetime method().
...
WLAN needs time info when validating certificates.
2015-07-02 16:29:43 +02:00
d680e28a11
cc3200: Optimize check for WLAN AP mode.
2015-07-02 16:15:59 +02:00
7fd538c1b6
cc3200: Raise an exception if trying to scan for networks in AP mode.
2015-07-02 15:03:58 +02:00
f522849a4d
cc3200: Add socket.timeout and socket.error exceptions.
2015-07-02 11:53:15 +02:00
70fc42cb28
cc3200: Add CA, certificate and key files to the updater list.
2015-06-30 22:11:15 +02:00
5ebf39784a
cc3200: Correct socket settimeout time format.
2015-06-29 11:01:11 +02:00
4f5b896a0b
cc3200: Adapt update-wipy.py timing to improve stability.
2015-06-28 14:14:24 +02:00
813b581127
cc3200: Add `Pin.name()` method.
2015-06-28 14:14:22 +02:00
778413168b
cc3200: Enable more features to improve compatibility with stmhal.
2015-06-28 14:14:20 +02:00
d02f671737
cc3200: Add deploy target and improve robustness of update-wipy.py.
2015-06-24 15:26:05 +02:00
e64afde073
cc3200: Create tools folder and add update-wipy.py script.
...
This script is used by Jenkins to update the WiPy with the newly
built firmware before running the tests. It's not placed in the
common tools folder because it is very WiPy specific.
2015-06-24 12:36:38 +02:00
92d95cc9d3
cc3200: Remove --specs=nano.specs linker flag.
2015-06-18 09:01:37 +02:00
ea2cc2b907
docs: Add more documentation for the CC3200 in the pyb module.
2015-06-16 15:45:24 +02:00
cdfa11f550
cc3200: In Timer.callback() only use value param if in edge count mode.
2015-06-16 15:34:46 +02:00
f28ed55aeb
cc3200/README.md: Specify the board name in the build command.
2015-06-11 09:26:36 +02:00
b630de1103
cc3200: Rename os.mkdisk() to os.mkfs().
2015-06-10 23:35:45 +02:00
1811c6bccf
cc3200: Remove Timer.AB constant.
...
Timer.A and Timer.B can be ORed for this purpose.
2015-06-10 23:35:43 +02:00
e2dc7ac2a9
cc3200: Clarify notes about the extended functionality of uhashlib.
2015-06-10 23:35:41 +02:00
95cc1ff542
cc3200: Re-name pyb.hard_reset() to pyb.reset().
2015-06-10 23:35:40 +02:00
330e21c986
cc3200: Use the pull up/down resistors on the antenna selection pins.
2015-06-10 23:35:38 +02:00
f960d753e4
cc3200: Fix bootloader build error.
2015-06-10 23:35:36 +02:00
3319780e96
cc3200: Add sendbreak method to the UART.
2015-06-10 23:35:35 +02:00
8a6d93aeed
cc3200: Make UART API more similar to stmhal.
2015-06-10 23:35:33 +02:00
640d00ea9d
cc3200: Change MP_OBJ_NULL for mp_const_none in params default value.
2015-06-10 23:35:32 +02:00
071d47fa3b
cc3200: Only kick the WDT if it's actually running.
2015-06-10 23:35:30 +02:00
6148f8b7d2
cc3200: Add contructor to the HeartBeat class.
2015-06-10 23:35:28 +02:00
371f4ba6b3
cc3200: Wrap antenna_init0() with #if MICROPY_HW_ANTENNA_DIVERSITY.
2015-06-08 10:38:19 +02:00
491c321720
cc3200: Re-config antenna selection when waking from suspended mode.
2015-06-07 13:28:47 +02:00
b4a41a8f70
cc3200: Add missing antenna diversity source files.
2015-06-07 00:42:40 +02:00
a3acaa000c
cc3200: Add antenna selection feature to WLAN.
2015-06-07 00:06:27 +02:00
a3cf4ea2f6
cc3200: Do not kick the watchdog inside the idle task.
2015-06-04 10:13:55 +02:00
71f85cc330
cc3200: Close ftp and telnet server sockets if listening fails.
2015-06-04 10:13:53 +02:00
cc20482aa9
cc3200: Add method to configure the servers timeout.
...
With network.server_timeout(secs) the timeout can be changed.
The default value is 300 secs. Minimmum accpeted is 5 secs.
Without params the function returns the current configured timeout.
2015-06-03 17:31:21 +02:00
2ffb6e1b15
cc3200: Fix 'MP_QSTR_sd' undeclared error when building for the LAUNCHXL.
2015-06-02 13:11:01 +02:00
84d11b5e53
cc3200: Add period set method to the Timer class.
2015-05-29 15:54:46 +02:00
417205623a
cc3200: Fix incorrect type for the wake cause variable.
2015-05-29 15:54:16 +02:00
2f2c0a13fb
cc3200: Clean up WLAN API. Make WLAN.info() an attrtuple.
2015-05-29 15:48:41 +02:00
622f241317
cc3200: Rename pyb.reset() to pyb.hard_reset() and add pyb.unique_id().
2015-05-29 10:22:20 +02:00
78744c4f7a
cc3200: Remove WIPY-SD variant, and make the WiPy the default board.
2015-05-28 13:22:26 +02:00
2abb58d758
cc3200: Rename Pin.get_config() to Pin.info().
2015-05-28 13:10:46 +02:00
1580e331ef
cc3200: Make small changes in WLAN to improve the API.
2015-05-28 13:10:44 +02:00
c754d8011d
cc3200: Simplify SPI polarity and phase checks in constructor.
2015-05-27 09:45:32 +02:00
95104b0fbd
cc3200: Add note about old revisions of the CC3200-LAUNCHXL.
2015-05-27 09:45:30 +02:00
d07de2d307
cc3200: Move the STDIO UART pin configuration to mpconfigboard.h.
2015-05-27 09:45:29 +02:00
9414f92fa9
cc3200: Fix I2C and SPI module references.
2015-05-27 09:45:27 +02:00
8096be089e
cc3200: Add make_new method to the WDT.
2015-05-27 09:45:25 +02:00
fca3493442
cc3200: Add make_new method to the RTC, like in stmhal.
2015-05-27 09:45:24 +02:00
5a0c5f8fea
cc3200: Use the WDT stall feature in debug mode only.
2015-05-27 09:45:22 +02:00
ec1f0e7551
cc3200: Use MCU reset instead of SOC reset.
...
I have seen the CC3200 hanging a couple of times, and according to TI
itself the SOC reset is not reliable, which explains my observations.
2015-05-27 09:45:21 +02:00
fabe79f7af
cc3200: Clean up exception handling.
2015-05-26 12:29:20 +02:00
124aa000af
cc3200: Use polarity and phase instead of submode in the SPI construct.
2015-05-26 11:30:48 +02:00
2dd47239de
cc3200: Make API more similar to stmhal.
...
In general the changes are:
1. Peripheral (UART, SPI, ADC, I2C, Timer) IDs start from 1, not zero.
2. Make I2C and SPI require the ID even when there's only one bus.
3. Make I2C and SPI accept 'mode' parameter even though only MASTER
is supported.
2015-05-25 21:47:19 +02:00
6545336206
cc3200: Make the WDT aware of the servers sleep/wake state.
2015-05-25 21:14:54 +02:00
5cd34aca27
cc3200: Use the correct ADC channel index when creating the object.
2015-05-25 21:14:46 +02:00
95f19b4542
cc3200: Remove duplicated checks for boot.py and main.py existency.
2015-05-25 21:14:39 +02:00
90d7c4ef3d
cc3200: Make HeartBeat.disable() thread safe.
2015-05-25 21:14:31 +02:00
3cb804de26
cc3200: Remove NIC abstraction layer.
...
That layer is nice, but the CC3200 doesn't need it and getting rid of
it saves ~200 bytes, which are more than welcome.
2015-05-24 11:44:08 +02:00
9f8c5456be
cc3200: Reset the servers and close user sockets on WLAN disconection.
...
This is needed to avoid half-open connections.
2015-05-24 11:44:06 +02:00
ed56b0baba
cc3200: Finally unlock the full wake on WLAN feature set.
2015-05-22 19:53:33 +02:00
18030bd85d
cc3200: Add own ubinascii module.
...
The reason to have our owm ubinascii module is so that later we
can add crc32 support using the hardware engine.
2015-05-22 09:56:11 +02:00
7506db4ccb
cc3200: Remove uhashlib.hexdigest().
2015-05-21 18:51:57 +02:00
e800db562f
cc3200: Add uhashlib. Supports SHA1 and SHA256.
2015-05-20 11:44:24 +02:00
5e38b48dd6
cc3200: Fix time.localtime() so that it returns the correct fields.
2015-05-20 11:44:22 +02:00
56053c37cf
cc3200: Rewrite WLAN.ifconfig(). Add WLAN.info() and WLAN.connections().
2015-05-20 11:44:21 +02:00
514ba15d6a
cc3200: Disable UCTYPES and enable ARRAY_SLICE_ASSIGN.
2015-05-20 11:44:19 +02:00
6f848b6dba
cc3200: Set the timer edge count interrupt value in the calbback const.
2015-05-17 16:11:12 +02:00
95a4f61499
cc3200: Make sure RTC wake value is >= 1ms.
2015-05-17 16:09:27 +02:00
c27dc38e85
cc3200: Re-name 'intmode' to 'mode' in the callback API.
2015-05-17 14:49:17 +02:00
cd3f2523f1
cc3200: Disable WLAN.urn() by default.
...
Can be enabled by defining MICROPY_PORT_WLAN_URN=1 in mpconfigport.h.
2015-05-17 14:20:24 +02:00
a379b6ed11
cc3200: Add optional timeout param to WLAN.connect().
2015-05-17 14:05:44 +02:00
fb9e4cf463
cc3200: Make sure to handle all pending pin interrupts.
...
When entering the interrupt handler of a given GPIO port, more than
one pin could have pending interrupts, therefore care must be taken
to service each interrupt one by one before leaving.
2015-05-17 13:42:15 +02:00
8e611e8414
cc3200: Add Timer module. Supports free running, PWM and capture modes.
2015-05-17 12:34:49 +02:00
9466e154b4
cc3200: Fix power mode param check in the UART callback constructor.
2015-05-17 12:26:40 +02:00
2b62707051
cc3200: Add os.rename()
2015-05-17 12:22:17 +02:00
1db4253886
lib: Move time utility functions to common library.
2015-05-13 00:12:54 +01:00
c50772d19f
py: Add mp_obj_get_int_truncated and use it where appropriate.
...
mp_obj_get_int_truncated will raise a TypeError if the argument is not
an integral type. Use mp_obj_int_get_truncated only when you know the
argument is a small or big int.
2015-05-12 23:05:53 +01:00
2bdefea9d6
cc3200: Enable MICROPY_MODULE_WEAK_LINKS.
2015-05-07 12:19:31 +02:00
e04aa96b4d
cc3200: Define MICROPY_CPYTHON_COMPAT=0.
...
This only disables some corner case functionality to keep C Python
compatibility, and saves ~600 bytes.
2015-05-05 11:23:06 +02:00
04ee5983fe
lib: Move some common mod_network_* functions to lib/netutils.
2015-05-04 11:48:40 +01:00
8c8d7f3c60
cc3200: Clean up pyb.Pin
...
Remove unused and unneeded functions, also create Pin.get_config() that
returns the whole configuration of the pin.
This reduces code size by ~500 bytes.
2015-05-03 11:26:56 +02:00
e4c899a08c
cc3200: WLAN.ifconfig returns an attrtuple instead of a dictionary.
2015-05-03 11:26:25 +02:00
f54bdecff2
cc3200: Implement Sleep.wake_reason()
2015-05-03 11:21:14 +02:00
71d482df47
cc3200: Clear the pending interrupt flag when disabling RTC callbacks.
2015-05-03 11:21:12 +02:00
6f218d7472
cc3200: Move wlan_init0() to the boot section.
...
This one creates a semaphore, therefore it must be executed only
after a hard reset (or when coming out of hibernation).
2015-04-29 16:10:40 +02:00
d8713d78f5
cc3200: Correct Sleep module name. Must be 'Sleep', not 'sleep'.
2015-04-29 15:27:28 +02:00
e282884e54
cc3200: When requesting safe boot, blink the led 3 times, not 4.
2015-04-29 15:27:21 +02:00
dbb4aef5e3
cc3200: Make WLAN.isconnected() also work in AP mode.
...
While in STA mode isconnected() returns True when connected to an AP
and the IP has been acquired. In AP mode, WLAN.isconnected() returns
True if at least one connected station is present.
2015-04-29 15:26:21 +02:00
bf4576dc91
cc3200: Clean-up servers enable/disable algorithm.
2015-04-29 14:25:44 +02:00
95f53461c2
py: Replace py-version.sh with makeversionhdr.py, written in Python.
...
Also rename py-version.h to mpversion.h for consistency with mpconfig.h.
2015-04-28 23:52:36 +01:00
d11317bcab
cc3200: Make WLAN scan results a list of attrtupple.
...
Each result is displayed like this:
ssid='MySSID', bssid=b'\xc0J\x00z.\xcc', security=2, channel=None, rssi=-74
The CC3200 doesn't provide channel info, that why is 'None'.
2015-04-29 00:04:01 +02:00
5225e29ce7
cc3200: Remove unneeded -lgcc in Makefile.
2015-04-29 00:03:58 +02:00
f81684141e
cc3200: Implement os.uname() to get details of the OS and hardware.
2015-04-29 00:03:56 +02:00
6fefd5d330
cc3200: Move telnet_process_credential with the other private functions.
...
Just for consistency.
2015-04-29 00:03:54 +02:00
f1ed8c8a2e
cc3200: Improve telnet_parse_input() in case of an incomplete option.
2015-04-28 16:48:33 +02:00
0458833072
cc3200: Make telnet login procedure work with Tera Term.
...
This is actually a workaround Ter Term's issue of not obeying to the
telnet options that the server is sending. Therefore, we must buffer
chars until either a '\r' or the max length of the username/password
is received.
2015-04-28 16:48:26 +02:00
9fbc265eb8
cc3200: Add delays to allow the servers to start and stop properly.
2015-04-28 15:16:33 +02:00
d34c4784a5
cc3200: Select NIC when the socket is created.
...
This makes sense since only WLAN is supported here.
2015-04-28 15:14:36 +02:00
Daniel Campora
Josef Gajdusek
Damien George
Matt Anderson