When dealing with a board which controls chip reset with UART's DTR/RTS,
we never see REASON_DEFAULT_RST (0), only REASON_EXT_SYS_RST (6). However,
trying a "raw" module with with just TXD/RXD UART connection, on power up
it has REASON_DEFAULT_RST as a reset reason.
According to the Arduino ESP8266 implementation the first argument to the
wifi scan callback is actually a bss_info pointer. This patch fixes the
iteration over this data so the first 2 entries are no longer skipped.
Fixes issue #2372.
Interrupts during neopixel_write causes timing problems and therefore
wrong light patterns. Switching off IRQs should help to keep the strict
timing schedule.
This new config option allows to control whether MicroPython uses its own
internal printf or not (if not, an external one should be linked in).
Accompanying this new option is the inclusion of lib/utils/printf.c in the
core list of source files, so that ports no longer need to include it
themselves.
modpybhspi now does the needed multiplexing, calling out to modpybspi
(bitbanging SPI) for suitable peripheral ID's. modmachinespi (previous
multiplexer class) thus not needed and removed.
modpybhspi also updated to following standard SPI peripheral naming:
SPI0 is used for FlashROM and thus not supported so far. SPI1 is available
for users, and thus needs to be instantiated as:
spi = machine.SPI(1, ...)
This extra forward slash for the starting-point directory is unnecessary
and leads to additional slashes on Max OS X which mean that the frozen
files cannot be imported.
Fixes#2374.
The OneWire class is now in its own onewire.py module, and the temperature
sensor class is in its own ds18x20.py module. The latter is renamed to
DS18X20 to reflect the fact that it will support both the "S" and "B"
variants of the device.
These files are moved to the modules/ subdirectory to take advantage of
frozen bytecode.
This is an object-oriented approach, where uos is only a proxy for the
methods on the vfs object. Some internals had to be exposed (the STATIC
keyword removed) for this to work.
Fixes#2338.
This type was used only for the typedef of mp_obj_t, which is now defined
by the object representation. So we can now remove this unused typedef,
to simplify the mpconfigport.h file.
That apparently will only help folks who read the docs on how to disable,
but could use a quick reminder straight in boot.py. For the developers,
it's important to have debug logging enabled in development branch
(master).
md5 is calculated over the entire file, except first 4 bytes, which contain
flash parameters and may be changed by flashing tool or MicroPython flash
auto-config.
Using __errno() function, and redirect it to use mp_stream_errno from
stream module. This is pre-requisite for integrating with 3rd-party libs,
like BerkeleyDB.
To filter out even prototypes of mp_stream_posix_*() functions, which
require POSIX types like ssize_t & off_t, which may be not available in
some ports.
The configuration bits for the UART register were wrong and the parity
couldn't be enabled, because the exist_parity member hasn't been updated. I
took this ESP8266 register description (http://esp8266.ru/esp8266-uart-reg/)
as reference.
Verification has been done with a logic analyzer.
The idea behind decrease is: bytecode and other static data is also kept on
heap, and can easily become half of heap, then setting threshold to half of
heap will have null effect - GC will happen on complete heap exhaustion like
before. But exactly in such config maintaining heap defragmented is very
important, so lower threshold to accommodate that.
To start with, the critical scripts _boot.py and flashbdev.py are frozen
to improve performance and reduce RAM consumption.
Saves about 1000 bytes of heap RAM for a bare boot with filesystem.
The time stamp is taken from the RTC for all newly generated
or changed files. RTC must be maintained separately.
The dummy time stamp of Jan 1, 2000 is set in vfs.stat() for the
root directory, avoiding invalid time values.
Based on my experience, there's rather non-zero chance to have an image be
flashed incorrectly. As --verify option is now works well in teh latest
esptool.py, enable it by default.
By design, at wake up from deepsleep, the RTC timer will be reset, but
the data stored in RTC memory will not [1]. Therefore, we have to adjust
delta in RTC memory before going into deepsleep to get almost correct
time after waking up.
[1] http://bbs.espressif.com/viewtopic.php?t=1184#p4082
Instead of calling strlen(), which won't work if there're 32 chars in
returned ESSID. struct bss_info::ssid_len is not documented in SDK API
Guide, but is present in SDK headers since 1.4.0. Just in case, previous
code is left commented.
ESP-SDK system_get_rtc_time() returns uint32 and therefore overflow
about every 7:45h. Let's write the last state of system_get_rtc_time()
in RTC mem and use it to check for overflow. This commit require running
pyb_rtc_get_us_since_2000() at least once within 7 hours to avoid
overflow.
This implementation makes use of vfs.stat() and therefore has the same
properties. Known issues for all ports: uos.stat(".") on the top level
returns the error code 22, EINVAL. The same happens with
uos.stat("dirname/") where dirname IS the name of a directory.
Ctrl-C will raise a KeyboardInterrupt and stop the scan (although it will
continue to run in the background, it won't report anything). If
interrupted, and another scan() is started before the old one completes
in the background, then the second scan will fail with an OSError.
ets_loop_iter processes pending tasks, and tasks are considered lower
priority than interrupts, so tasks shouldn't be processed if interrupts
are disabled.
Make dupterm subsystem close a term stream object when EOF or error occurs.
There's no other party than dupterm itself in a better position to do this,
and this is required to properly reclaim stream resources, especially if
multiple dupterm sessions may be established (e.g. as networking
connections).
Adding a very first start section to get people going after flashing.
I tried to condense it to a minimum to avoid as much as possible
redundancy and bloating.
That one was missing in the module, even if it was available in the
vfs object. The change consist of adding the name and preparing the
call to the underlying vfs module, similar to what was already
implemented e.g. for remove.
Rename is useful by itself, or for instance for a safe file replace,
consisting of the sequence:
write to a temp file
delete the original file
rename the temp file to the original file's name
These symbols are still defined in terms of the system Exxx symbols, and
can be switched to internal numeric definitions at a later stage.
Note that extmod/modlwip still uses many system Exxx symbols.
This is kind of compensation for 4K FatFs buffer size which is eaten away
from it on FS mount. This should still leave enough of networking ("OS")
heap.
It interferes with running testsuite. master branch should be optimized for
development, so any features which interfere with that, would need to be
disabled by default.
Useful for testing fragmentation issues in OS heap. E.g. freemem() may
report large amount, but is it possible to actually allocate block of
a given size? Issue malloc() (followed by free()) to find out.
If there's no port_config.py file, or it lacks WEBREPL_PASS variable,
"initial setup mode" will be entered on first WebREPLconnection. User
will be asked for password, which will be written to
port_config.WEBREPL_PASS, and system restarted to work in normal mode
with password active.
Changes are:
- added OneWireError exception and used where errors can occur
- renamed read/write functions to use same names as C _onewire funcs
- read_bytes is now read, write_bytes is now write
- add ability to read/write DS18B20 scratch pad
- rename start_measure to convert_temp (since that's what it does)
- rename get_temp to read_temp (consistency with other read names)
- removed test function
All functionality of the pyb module is available in other modules, like
time, machine and os. The only outstanding function, info(), is
(temporarily) moved to the esp module and the pyb module is removed.
All Flash sans firmware at the beginning and 16K SDK param block at the
end is used for filesystem (and that's calculated depending on the Flash
size).
Most pin I/O can be done just knowing the pin number as a simple
integer, and it's more efficient this way (code size, speed) because it
doesn't require a memory lookup to get the pin id from the pin object.
If the full pin object is needed then it can be easily looked up in the
pin table.
Use the machine.deepsleep() function to enter the sleep mode. Use the
RTC to configure the alarm to wake the device.
Basic use is the following:
import machine
# configure RTC's ALARM0 to wake device from deep sleep
rtc = machine.RTC()
rtc.irq(trigger=rtc.ALARM0, wake=machine.DEEPSLEEP)
# do other things
# ...
# set ALARM0's alarm to wake after 10 seconds
rtc.alarm(rtc.ALARM0, 10000)
# enter deep-sleep state (system is reset upon waking)
machine.deepsleep()
To detect if the system woke from a deep sleep use:
if machine.reset_cause() == machine.DEEPSLEEP_RESET:
print('woke from deep sleep')
Flash size as seen by vendor SDK doesn't depend on real size, but rather on
a particular value in firmware header, as put there by flash tool. That means
it's user responsibility to know what flash size a particular device has, and
specify correct parameters during flashing. That's not end user friendly
however, so we try to make it "flash and play" by detecting real size vs
from-header size mismatch, and correct the header accordingly.
"" is the correct name of the root directory when mounting a device there
(as opposed to "/"). One can now do os.listdir('/') and open('/abc'), as
well as os.listdir() and open('abc').
Paul Sokolovsky
Damien George
Torsten Wagner
Delio Brignoli
Radomir Dopieralski
daniel-k
Robert HH
puuu
Mark
misterdanb
Torwag
Noah Rosamilia
Mike Causer
Aex Aey
bsdfox