8faf2dc75b
docs/wipy: Add wipy tutorials section.
2015-10-19 21:17:15 +02:00
36ae417c9f
docs: Add wipy and network.server documentation.
2015-10-19 21:17:15 +02:00
4542643025
docs: Update all WiPy docs to reflect the new API.
2015-10-17 23:29:04 +02:00
d6442407f5
docs: Fix formatting of DAC code examples.
2015-10-13 14:44:00 +01:00
b5c43be135
stmhal: Allow to set bits resolution for DAC; 8 is default, can have 12.
...
This patch allows to configure the DAC resolution in the constructor and
in the init function, eg:
dac = DAC(1, bits=12).
The default resolution is 8 bits for backwards compatibility. The bits
sets the maximum value accepted by write and write_timed methods, being
2**bits - 1.
When using write_timed with 12-bit resolution, the input buffer is
treated as an unsigned half-word array, typecode 'H'.
See PR #1130 for discussion.
2015-10-13 14:33:04 +01:00
845b5a2a58
docs: Describe properly how MCU can be woken from pyb.standby() state.
2015-10-10 00:03:14 +01:00
37ab061f4d
docs: Update esp8266 documentation to match the code.
...
* Move the esp.status() to network module.
* Describe the wifi.isconnected() method.
* Describe esp.mac(), esp.wifi_mode(), esp.phy_mode(), esp.sleep_type(),
esp.deepsleep(), and esp.flash_id() functions.
2015-10-06 23:25:35 +01:00
861fad5819
docs: Adapt WiPy's ADC doc and quickref to the new API.
2015-09-16 10:10:40 +02:00
aba75e1233
cc3200: New SPI API.
2015-09-16 10:10:33 +02:00
624cdeacc4
docs/wipy: Add pins to the I2C constructor.
2015-09-16 10:10:31 +02:00
41f6948545
cc3200: New WDT API.
2015-09-16 10:10:29 +02:00
8332044f75
cc3200: Add UART.ODD and UART.EVEN to select parity.
2015-09-16 10:10:26 +02:00
d5ec336eef
cc3200: Replace Pin.PULL_NONE with None.
2015-09-16 10:10:24 +02:00
f38d16483a
docs: Update I2C and UART docs to match the new API.
2015-09-16 10:10:22 +02:00
f91f212d9f
cc3200: New UART API plus related test.
2015-09-10 07:59:47 +02:00
36821d095a
cc3200: Add alternate functions list to Pin object.
...
Also remove pin.high() and pin.low() methods.
2015-09-10 07:59:41 +02:00
d5e256486e
cc3200: Re-work Pin class according to the new API.
...
Also add relevant test.
2015-09-10 07:59:35 +02:00
11d21081b4
cc3200: Rework SD API. Increase heap to avoid malloc failures.
2015-08-16 20:17:58 +02:00
34c290b678
cc3200: Rename SPI nss param to cs.
...
The nss param in the pyboard has a different meaning that doesn't
apply to the WiPy.
2015-08-16 20:17:55 +02:00
ea5061e409
cc3200: Improve callback API.
...
Rename "wakes" param to "wake_from" and make "value" an object
instead of an integer.
2015-08-16 20:17:52 +02:00
7027fd5343
cc3200: Make ADC API compatible with the pyboard.
2015-08-10 23:42:05 +02:00
e54a4f1f48
cc3200: Improve support for WEP security.
...
Key is always entered as a string, but if security is WEP, the key
is converted automatically to hex before connecting or configuring
the device as an AP.
2015-08-09 19:22:16 +02:00
d43019163d
docs: Add i2c keywork arguments only indication.
2015-08-09 19:22:14 +02:00
00c4d6562e
cc3200: Add nic.iwconfig() to set/get WLAN configuration.
...
Changes are based on this post:
https://github.com/micropython/micropython/issues/876#issuecomment-115255551
The constructor can optionally take the same params of iwconfig in
order to configure WiFi when creating the object. Params are
keyworkd only. The WiPy accepts:
- mode (int -> WLAN.AP or WLAN.STA)
- ssdi (string)
- security (int -> WLAN.OPEN, WLAN.WEP, WLAN.WPA, WLAN.WPA2)
- key (string)
- channel (int (1-11))
- antenna (int -> WLAN.INTERNAL, WLAN.EXTERNAL)
2015-08-09 19:22:12 +02:00
c6926c374d
cc3200: Make I2C and SPI API the same as in stmhal.
2015-08-02 20:22:15 +02:00
007878781c
cc3200: Rename pins from GPIO to just GP.
...
This is how the names will be printed on the sticker that goes on top
of the EMI shield. The shorter names also help saving a few bytes of
RAM and ROM.
2015-07-30 00:43:08 +02:00
7693ef3bd6
stmhal: Allow ADC.read_timed to take Timer object in place of freq.
...
This allows a user-specified Timer for the triggering of the ADC read,
mirroring the new behaviour of DAC.write_timed.
Addresses issue #1129 .
2015-07-22 19:41:13 +01:00
abc24c1876
stmhal: Allow DAC.write_timed to take Timer object in place of freq.
...
This allows the DAC to use a user-specified Timer for the triggering
(instead of the default Timer(6)), while still supporting original
behaviour.
Addresses issues #1129 and #1388 .
2015-07-21 23:39:49 +01:00
7463442e58
docs: Update pyb.Accel doc to reflect changes and explain filtered_xyz.
2015-07-08 11:10:51 +01:00
5161239c9f
cc3200: time.sleep() now receives seconds, like CPython.
2015-07-02 17:23:22 +02:00
813b581127
cc3200: Add `Pin.name()` method.
2015-06-28 14:14:22 +02:00
fa1cdb09fc
docs: Fix duplicate label error for network.WLAN.
2015-06-27 13:42:00 +01:00
7c61249ae6
esp8266: Updated documentation for scan() and moved to network
2015-06-17 23:16:28 +03:00
ea2cc2b907
docs: Add more documentation for the CC3200 in the pyb module.
2015-06-16 15:45:24 +02:00
05c6fbcae6
esp8266: Fix the documentation for esp.connect() and esp.disconnect()
...
Since the commit that moved those two functions failed to update
the documentation, this is a fix for that.
2015-06-13 23:03:06 +03:00
cfcf47c064
docs: Add initial draft documentation for the WiPy.
...
This makes all common files "port-aware" using the .. only directive.
2015-06-10 23:37:56 +02:00
06e85ecfa6
docs/uctype: Update for constructor argument order changes.
...
Also, other small cleanups/improvements.
2015-06-06 22:58:04 +03:00
3eece29807
docs: Change "Micro Python" to "MicroPython" in all places in docs.
2015-06-04 23:53:26 +01:00
32ce72cb9e
docs/uctypes: Typo fix.
2015-06-02 10:35:06 +03:00
f8bce131c0
docs/uctypes: Fix API description errors.
...
"Structure class" is its descriptor, encoded as a dictionary. Then,
uctypes.struct() instantiates an actual object, and thus requires memory
address.
2015-06-02 10:30:01 +03:00
78ccb44a90
docs: Document esp module for ESP8266.
...
I document as much as I could guess from experiments and reading the
code for the ``esp`` module for the ESP8266 port of Micropython.
For now the tag has to be set manually with -t option when building,
when we have properly split documentation, there will be a separate
config file for esp8266 with that the tag "port_esp8266" set.
To build use:
make SPHINXOPTS="-t port_esp8266" html
2015-05-30 12:49:58 +01:00
3ad94d6072
extmod: Add ubinascii.unhexlify
...
This also pulls out hex_digit from py/lexer.c and makes unichar_hex_digit
2015-05-20 09:29:22 +01:00
0bfc57022d
docs: Document USB_VCP file-like methods.
2015-05-13 20:42:12 +01:00
c7df9c6c47
stmhal: Add os.rename function.
2015-05-12 23:43:11 +01:00
5df81de7af
sthmal/rtc.c: Add calibration() method to get/set RTC fine-tuning value.
2015-05-11 23:48:39 +01:00
dea853d3a3
docs: Document pyb.stop, pyb.standby and pyb.RTC.wakeup.
2015-04-21 22:35:17 +01:00
e3cd154317
stmhal: Add support for sending and receiving CAN RTR messages.
2015-04-18 14:53:00 +01:00
7d5e34287c
stmhal: Allow sending CAN messages with timeout=0.
...
Thanks to Henrik Sölver for this patch.
2015-04-16 23:52:43 +01:00
e97dddcdca
docs: Document pyb.main function to set main script.
2015-04-09 10:08:25 +01:00
344057ac50
docs: uctypes: Bullet list formatting fixes.
2015-03-31 01:29:07 +03:00
danicampora
Damien George
Radomir Dopieralski
Bill Owens
Paul Sokolovsky
Dave Hylands
Steve Zatz
blmorris
Henrik