Commit Graph

2863 Commits

Author SHA1 Message Date
David Lechner f8805e2416 renesas-ra/mpconfigport: Drop pyb_hid_report_desc root pointer.
pyb_hid_report_desc is not used anywhere in the renesas-ra port (probably
was copied from stm32 port).

Signed-off-by: David Lechner <david@pybricks.com>
2022-07-18 13:50:34 +10:00
David Lechner c09e31dabb pic16bit/pic16bit_mphal: Use MP_REGISTER_ROOT_POINTER().
This uses MP_REGISTER_ROOT_POINTER() to register keyboard_interrupt_obj
and removes the same from mpconfigport.h.

Signed-off-by: David Lechner <david@pybricks.com>
2022-07-18 13:50:34 +10:00
David Lechner 8a69c54211 nrf: Use MP_REGISTER_ROOT_POINTER().
This uses MP_REGISTER_ROOT_POINTER() to register all port-specific root
pointers for the nrf port.

Signed-off-by: David Lechner <david@pybricks.com>
2022-07-18 13:50:34 +10:00
David Lechner a316a8fdb3 mimxrt: Use MP_REGISTER_ROOT_POINTER().
This uses MP_REGISTER_ROOT_POINTER() to register all port-specific root
pointers in the mimxrt port.

Signed-off-by: David Lechner <david@pybricks.com>
2022-07-18 13:50:34 +10:00
David Lechner e2d4db96da esp8266: Use MP_REGISTER_ROOT_POINTER().
This uses MP_REGISTER_ROOT_POINTER() to register all port-specific root
pointers in the esp2866 port.

Signed-off-by: David Lechner <david@pybricks.com>
2022-07-18 13:50:34 +10:00
David Lechner b63282c361 esp32: Use MP_REGISTER_ROOT_POINTER().
This uses MP_REGISTER_ROOT_POINTER() to register all root pointers in the
esp32 port.

Signed-off-by: David Lechner <david@pybricks.com>
2022-07-18 13:50:34 +10:00
David Lechner 226e969ad3 cc3200: Use MP_REGISTER_ROOT_POINTER().
This uses MP_REGISTER_ROOT_POINTER() to register all port-specific root
pointers for the cc3200 port.

Signed-off-by: David Lechner <david@pybricks.com>
2022-07-18 13:50:34 +10:00
David Lechner 095ad87adf cc3200/mpconfigport: Remove mp_const_user_interrupt.
mp_const_user_interrupt was listed as a root pointer but not used anywhere
in the code base, so it can be removed.

Signed-off-by: David Lechner <david@pybricks.com>
2022-07-18 13:50:34 +10:00
David Lechner a3703584fe extmod/modnetwork: Use MP_REGISTER_ROOT_POINTER().
This uses MP_REGISTER_ROOT_POINTER() to register mod_network_nic_list and
removes the same from all mpconfigport.h.

Signed-off-by: David Lechner <david@pybricks.com>
2022-07-18 13:50:25 +10:00
David Lechner e531b72b56 extmod/nimble: Use MP_REGISTER_ROOT_POINTER().
This uses MP_REGISTER_ROOT_POINTER() to register bluetooth_nimble_memory
and bluetooth_nimble_root_pointers and removes the same from all
mpconfigport.h.

Signed-off-by: David Lechner <david@pybricks.com>
2022-07-18 13:50:14 +10:00
David Lechner 8fa6191f95 extmod/btstack: Use MP_REGISTER_ROOT_POINTER().
This uses MP_REGISTER_ROOT_POINTER() to register
bluetooth_btstack_root_pointers and removes the same from all
mpconfigport.h.

Signed-off-by: David Lechner <david@pybricks.com>
2022-07-18 13:49:51 +10:00
David Lechner ac86e8449a drivers/ninaw10/nina_wifi_bsp: Use MP_REGISTER_ROOT_POINTER().
This uses MP_REGISTER_ROOT_POINTER() to register mp_wifi_spi, mp_wifi_timer
and mp_wifi_sockpoll_list and removes the same from all mpconfigport.h.

Signed-off-by: David Lechner <david@pybricks.com>
2022-07-18 13:49:28 +10:00
David Lechner e5631d9595 unix/alloc: Use MP_REGISTER_ROOT_POINTER() for mmap_region_head.
This uses MP_REGISTER_ROOT_POINTER() to register mmap_region_head and
removes the same from mpconfigport.h.

Signed-off-by: David Lechner <david@pybricks.com>
2022-07-18 13:49:09 +10:00
David Lechner 81dbea1ce3 shared/readline: Use MP_REGISTER_ROOT_POINTER().
This uses MP_REGISTER_ROOT_POINTER() to register the readline_history root
pointer array used by shared/readline.c and removes the registration from
all mpconfigport.h files.

This also required adding a new MICROPY_READLINE_HISTORY_SIZE config option
since not all ports used the same sized array.

Signed-off-by: David Lechner <david@pybricks.com>
2022-07-18 13:48:49 +10:00
David Lechner fc3d7ae11b py/make_root_pointers: Add MP_REGISTER_ROOT_POINTER parser/generator.
This adds new compile-time infrastructure to parse source code files for
`MP_REGISTER_ROOT_POINTER()` and generates a new `root_pointers.h` header
file containing the collected declarations.  This works the same as the
existing `MP_REGISTER_MODULE()` feature.

Signed-off-by: David Lechner <david@pybricks.com>
2022-07-18 13:48:23 +10:00
robert-hh cca2305211 nrf/drivers/usb: Fix reading of a single USB CDC character. 2022-07-17 00:13:15 +10:00
robert-hh be6f0f3b3b nrf/mpconfigport: Call tud_task() in MICROPY_EVENT_POLL_HOOK.
So that the interrupt character can interrupt a long-running loop, like a
sleep.
2022-07-17 00:12:34 +10:00
robert-hh c985a0b514 nrf/drivers/usb: Add a tud_cdc_rx_cb() callback to check interrupt char. 2022-07-17 00:12:03 +10:00
robert-hh 60539ea162 nrf/drivers/usb: Probe for interrupt char in USB CDC task.
And ensure that the input queue is empty when scheduling the interrupt.
2022-07-17 00:11:14 +10:00
Stuart Langridge 30c7f1790b nrf/drivers/bluetooth: Handle PHY_UPDATE messages, used in Bluetooth 5.
Some devices, such as the LightBlue BTLE app on iOS, try to use Bluetooth 5
when connecting to a device.  This means that they will send a
BLE_GAP_EVT_PHY_UPDATE_REQUEST message to shift to a new physical layer.
If this event isn't handled, LightBlue (and likely other Bluetooth 5.0
central devices) will try to connect and then fail, staying in
"Connecting..." state forever.  This message should be replied to with
sd_ble_gap_phy_update, as documented in
drivers/bluetooth/s140_nrf52_6.1.1/s140_nrf52_6.1.1_API/include/ble_gap.h.

This commit handles the event.  LightBlue can now successfully connect to a
BTLE device on a P10059 nRF52840 dongle running MicroPython.  Two other
related events have logging added in case they are needed in the future.
2022-07-16 23:46:30 +10:00
iabdalkader 262f4a4855 nrf/mpconfigport: Remove obsolete module declarations.
External module declarations are no longer used/needed after the
introduction of MP_REGISTER_MODULE.
2022-07-15 22:54:25 +10:00
Jim Mussared 74794d42b8 rp2/CMakeLists: Use armv6m mpy-cross arch for rp2.
Commit 0e28a1f0e5 made it possible to set
-march=armv6m.  It needs to be used when freezing for rp2.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2022-07-12 23:50:19 +10:00
David Lechner 093c4b6b26 unix/main: Restore tty settings on nlr_jump_fail().
Since nlr_jump_fail() exits the process, it can leave the terminal in raw
mode which means characters are not echoed.  Fix this by restoring the
original terminal mode.

Signed-off-by: David Lechner <david@pybricks.com>
2022-07-12 17:20:37 +10:00
Peter Harper 9f0f7e34c7 rp2/mphalport: Fix missing storage_read_blocks symbol in debug build.
When building `make BOARD=PICO_W DEBUG=1` the cyw43-driver requires
storage_read_blocks().

Signed-off-by: Peter Harper <peter.harper@raspberrypi.com>
2022-07-12 16:56:38 +10:00
Jim Mussared c5563aa024 rp2/mpconfigport: Make networking options consistent across boards.
Enable the same set of networking features on boards with wifi/ethernet.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2022-07-12 16:28:44 +10:00
Jim Mussared 662dc8602b rp2: Make atomic sections suspend the other core (if active).
When a flash write/erase is in progress, we need to ensure that the
other core cannot be using XIP.

This also implements MICROPY_BEGIN_ATOMIC_SECTION as a full mutex, which
is necessary as it's used to syncronise access to things like the scheduler
queue.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2022-07-12 16:20:21 +10:00
Jim Mussared daff597753 rp2: Run USB stack task exclusively from core 0.
The goal is to avoid a situation where core 1 is shut down while holding
the tinyusb spinlock, which could happen during soft reset if
mp_thread_deinit is called while core1 is running tud_task().

This also fixes a latent race where the two cores are competing to
decrement and compare `vm_hook_divisor` with no mem fence or atomic
protection -- only core0 will now do this.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2022-07-12 16:17:19 +10:00
Damien George 1329155b96 stm32/sdram: Include boardctrl.h for fatal-error handler.
Signed-off-by: Damien George <damien@micropython.org>
2022-07-11 14:47:46 +10:00
Damien George 9af6a275dd stm32/boardctrl: Allow boards to override fatal-error handler.
To override it a board must define MICROPY_BOARD_FATAL_ERROR to a function
that takes a string message and does not return.

Signed-off-by: Damien George <damien@micropython.org>
2022-07-08 23:47:29 +10:00
Damien George 9f8087b448 esp8266/boards: Enable reverse-special-methods on GENERIC board.
It increases the firmware size by 292 bytes.

Addresses issue #5897.

Signed-off-by: Damien George <damien@micropython.org>
2022-07-08 23:06:16 +10:00
Damien George d7a162516e esp32/modmachine: Fix machine.freq to allow maximum 160MHz on ESP32-C3.
Fixes issue #8824.

Signed-off-by: Damien George <damien@micropython.org>
2022-07-08 22:46:51 +10:00
iabdalkader 6753c53318 nrf/modmachine: Add machine.idle() function.
This improves the compatibility of the nrf port machine module with common
drivers, by adding a machine.idle() alias for lightsleep.
2022-07-08 12:37:59 +10:00
iabdalkader 5c31a6c023 nrf/boards/arduino_nano_33_ble: Add Arduino Nano 33 BLE sense board. 2022-07-07 23:58:03 +10:00
David Lechner 07cae9178f nrf/Makefile: Drop unused MPY_CROSS and MPY_TOOL variables.
These variables are no longer used in the nrf Makefile and can be removed.

Signed-off-by: David Lechner <david@pybricks.com>
2022-07-05 23:51:26 +10:00
Damien George d27e58449b stm32/mboot: Remove redundant code in mboot_state_change function.
This code was made redundant in 87fbceef26

Signed-off-by: Damien George <damien@micropython.org>
2022-07-05 23:47:54 +10:00
David Lechner 5ab7dfe6db unix/moduos: Include errno.h.
The file `ports/unix/moduos.c` uses `errno` so it needs to include
`errno.h`, otherwise a compiler error can occur.

Signed-off-by: David Lechner <david@pybricks.com>
2022-07-05 23:44:07 +10:00
IhorNehrutsa 1ea82b6dcc esp32,esp8266: Rename WLAN dhcp_hostname config to hostname.
But retain old name for backwards compatibility.
2022-07-05 23:40:32 +10:00
Jim Mussared 2efaebc899 rp2/boards/ARDUINO_NANO_RP2040_CONNECT: Add urequests module.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2022-07-05 23:03:02 +10:00
Jim Mussared 11ef618bbc rp2/CMakeLists: Don't override cyw43-driver unless necessary.
This supresses a warning from pico-sdk when the board isn't using this
driver.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2022-07-05 23:00:43 +10:00
Jim Mussared 5f4143dd40 rp2/CMakeLists: Give error if required submodules are missing.
Ensure that nimble and cyw43-driver are initialised when the board requires
it.  Also make these work with `make submodules`.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2022-07-05 23:00:36 +10:00
Jim Mussared 651b370484 rp2/Makefile: Regenerate cmake if generated Makefile missing.
`CMakeCache.txt` can exist even if cmake failed. Use `Makefile` instead.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2022-07-05 22:47:06 +10:00
Damien George 85be3d3da8 rp2/mpconfigport: Factor core event handling to EVENT_POLL_HOOK_FAST.
Signed-off-by: Damien George <damien@micropython.org>
2022-07-05 16:11:42 +10:00
Damien George 4b9a2abbde rp2/main: Set default AP auth mode to WPA2_AES_PSK.
Signed-off-by: Damien George <damien@micropython.org>
2022-07-05 11:07:16 +10:00
Damien George 3d76292f37 rp2/boards/GARATRONIC_PYBSTICK26_RP2040: Change pico-sdk board name.
This follows a similar renaming in pico-sdk.

Signed-off-by: Damien George <damien@micropython.org>
2022-07-05 09:45:44 +10:00
Jim Mussared 6519b1b95e stm32/Makefile: Fix setting of define that enables WIZNET5K driver.
Commit 9670a156da missed one renaming of
MICROPY_PY_WIZNET5K to MICROPY_PY_NETWORK_WIZNET5K which prevented the
Wiznet interface from being enabled.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2022-07-02 00:21:36 +10:00
Damien George 99c2589778 rp2/boards/PICO_W: Add new Pico W board, an RP2040 with WiFi.
Work done in collaboration with Graham Sanderson and Peter Harper.

Signed-off-by: Damien George <damien@micropython.org>
2022-06-30 17:03:51 +10:00
Damien George 50e46552c0 rp2: Integrate CYW43xx WiFi driver.
This includes:
- Configuration file for the cyw43-driver.
- Integration of cyw43-driver into the build, using lwIP.
- Enhancements to machine.Pin to support extension IO pins provided by the
  CYW43xx.
- More mp-hal pin helper functions.
- mp_hal_get_mac_ascii MAC address helper function.
- Addition of rp2.country() function to set the country code.

A board can enable this driver by setting MICROPY_PY_NETWORK_CYW43 in their
cmake snippet.

Work done in collaboration with Graham Sanderson and Peter Harper.

Signed-off-by: Damien George <damien@micropython.org>
2022-06-30 17:03:51 +10:00
Damien George c001cfa603 rp2/mpnetworkport: Convert network task scheduling to use PendSV IRQ.
It is more reliable and scales better when more components need it.

Work done in collaboration with Graham Sanderson and Peter Harper.

Signed-off-by: Damien George <damien@micropython.org>
2022-06-30 17:03:47 +10:00
Damien George 7cdad05e54 rp2/rp2_flash: Add asserts for size of flash filesystem partition.
Signed-off-by: Damien George <damien@micropython.org>
2022-06-30 16:03:21 +10:00
Damien George c95f99105a rp2/lwip_inc: Enable lwIP status callback.
Signed-off-by: Damien George <damien@micropython.org>
2022-06-30 16:03:21 +10:00