dab0f316d2
docs/reference/isr_rules.rst: Two minor additions to docs for using ISR.
...
- Refers to the technique of instantiating an object for use in an ISR by
specifying it as a default argument.
- Footnote detailing the fact that interrupt handlers continue to be
executed at the REPL.
2016-09-07 17:12:42 +10:00
4a9542c0c0
docs/library/machine.WDT: Add that WDT is available on pyboard.
2016-09-06 14:20:52 +10:00
b4df3e74e1
docs/esp8266/quickref: Further improvements for SPI subsections.
...
Consistency and formatting.
2016-09-04 23:31:05 +03:00
20da9064d7
docs/esp8266/quickref: Update information on SPI classes.
...
SPI(1) is not used for hardware SPI. Few more details are provided.
2016-09-04 21:13:55 +03:00
76dcaddc0f
docs/esp8266/quickref: Add internal links to docs for some modules.
2016-08-29 17:40:36 +10:00
efc904c41d
docs/pyboard/quickref: Add section on "delay and timing" for utime mod.
...
And remove reference to deprecated pyb.delay() and pyb.millis().
2016-08-29 17:33:02 +10:00
5c3a2f162e
docs/pyboard/quickref: Add links to pinouts for other pyboard variants.
2016-08-29 17:32:38 +10:00
0f8b1ba8a2
docs/library: Add reference for pyb.usb_mode and pyb.USB_HID.
2016-08-29 15:17:20 +10:00
f2da6467a9
docs/pyboard: Update USB mouse tutorial to use pyb.USB_HID().
2016-08-29 15:16:51 +10:00
57c92d90b0
docs/pyboard: Update USB mouse tutorial to use VCP instead of CDC.
2016-08-29 15:15:25 +10:00
13c5a228c9
docs/esp8266: Update quickref and tutorial for OneWire/DS18X20 driver.
2016-08-29 12:52:50 +10:00
ed0a06a93f
docs/esp8266/quickref: Fix and update the SPI docs
...
Use the `SPI` factory function in the examples, and use
proper baud rate of 80 000 000.
2016-08-28 23:14:45 +10:00
8e7dfea803
esp8266/modpybhspi: Add a HSPI module for hardware SPI support
...
This module uses ESP8266's SPI hardware, which allows much higher
speeds. It uses a library from
https://github.com/MetalPhreak/ESP8266_SPI_Driver
2016-08-19 21:19:59 +03:00
64c5a9435c
docs/library/machine.WDT: Add note that WDT is only available on WiPy.
2016-08-17 14:22:39 +10:00
5e01fb01b3
docs/esp8266/intro: Add command to install esptool.py 1.0.1 via pip.
...
It used a standard BootROM programming algo and may be useful as a
fallback.
2016-08-10 21:40:40 +03:00
2146cdab5e
docs/esp8266/tutorial/pins: Fix typo in commands for pin input mode.
2016-08-09 21:13:27 +03:00
e4e4526954
docs: Bump version to 1.8.3.
2016-08-09 23:49:25 +10:00
5c73de0337
docs/uio: Mention seek()/flush() support for io.BytesIO.
2016-08-09 01:52:56 +03:00
3e5534caf7
docs/esp8266/intro: Focus on hazards of unearthed power wrt electronics.
2016-08-07 22:41:34 +03:00
d2cab0b7be
docs/esp8266/tutorial/intro: Add anchor for link from quickeref.
2016-08-07 22:16:40 +03:00
f84dda7111
docs/esp8266/quickref: Link to installation instructions.
2016-08-07 17:46:27 +03:00
a9923d190e
docs/esp8266/intro: Add troubleshooting section.
...
Tries to summarize most of the issues we've seen so far.
2016-08-07 17:28:33 +03:00
919c54f750
docs/esp8266/intro: Rename to "Getting started" from "Introduction".
...
People tend to skip introductions (everyone knows what esp8266 is, right?),
so try to do A/B testing with a title inviting to read it.
2016-08-07 17:28:23 +03:00
1966745689
esp8266/tutorial/intro: Reword para abou -fm dio switch.
...
Not all NodeMCU boards require it.
2016-08-07 16:31:09 +03:00
fdb411a8c5
docs/library/index: Include array module in ToC.
2016-08-07 00:16:41 +03:00
8a0b6f561c
docs/array: Document array module.
2016-08-07 00:13:48 +03:00
ce166e6b68
docs: Spelling mistakes
2016-08-02 11:17:46 +03:00
b4564841b6
docs: Add DHT to ESP8266 Quick Ref and Tutorial
2016-08-01 14:39:57 +03:00
1459a8d5c9
docs: Bump version to 1.8.2.
2016-07-10 12:46:50 +01:00
047ac2044d
docs/library: Fix typo in docs for usocket.listen().
2016-06-26 12:38:20 +01:00
b2641b53e0
docs/conf.py: Exclude cmath from modindex for wipy.
2016-06-19 19:17:42 +03:00
2b6dcdd3e4
docs/sys: print_exception: Fixes/clarifications.
2016-06-18 19:06:53 +03:00
617e033e2f
docs/select: Add an article.
2016-06-18 19:06:42 +03:00
51805e4a3a
docs: Rebuild docs from scratch, as required for proper only:: handling.
...
Docs are now by default rebuilt from scratch, as required to build
conditionalized (i.e. using only:: directive) docs across different
output types. We have pretty small docset, so that's still rather fast.
However, if that's a concern, incremental rebuilds can be used by
passing "FORCE=" (nothing after =) as a make parameter. This will work
when using the same output type (e.g. only "html").
2016-06-14 00:23:33 +03:00
91031b60dc
docs/conf.py: Active sphinx_selective_exclude extensions.
...
For modindex_exclude extension, per-port module excludes are also added.
With these changes, it's possible to generate docs for a particular port
devoid of any superfluous and unrelated content, including in indexes and
full-text search - with small caveat: when generating PDF docs after HTML,
or vice-versa cached internal doctree representation (build/*/doctrees/)
must be removed first.
2016-06-12 01:18:13 +03:00
f6d01b8b67
docs: Add sphinx_selective_exclude extension suite.
...
Designed specifically to workaround issues we were facing with generating
multiple conditionalized output docsets from a single master doctree.
Extensions were factored out into a separate project, based on the fact
that many other Sphinx users experience similar or related problems:
https://github.com/pfalcon/sphinx_selective_exclude
Corresponds to the 182f4a8da57 upstream revision.
2016-06-12 01:13:39 +03:00
9de5eb278d
docs/sys: Detailed description of print_exception() diff from traceback module.
2016-06-10 23:06:56 +03:00
343b5c1081
docs/uctypes: Improve documentation.
...
Seealso and Limitations sectiosn added, better formatting and grammar.
2016-06-09 05:02:55 +03:00
79b40d1127
docs/machine*: Remove explicit targets and "machine." prefixes on classes.
...
With currentmodule:: set properly, none are needed. Extra "machine." prefix
produces wrong indexing data.
2016-06-09 03:03:53 +03:00
a0c296f6d5
docs/machine.Pin: Disambiguate object call method.
2016-06-09 02:58:15 +03:00
1d3b903eb5
docs/library/index: Add builtins.rst.
2016-06-09 00:26:44 +03:00
0cec4e9bb8
docs/builtins: Enumerate all builtin functions implemented.
...
Based on unix version. No descriptions so far.
2016-06-09 00:24:52 +03:00
f1eb672d88
docs/pyb.Pin: Sort .af() and .af_list() methods together.
2016-06-08 16:36:22 +03:00
a384a53130
docs/pyb.*: Use proper class case in method headers.
...
Class designator will be used as is in indexes, so must match actual class
name.
2016-06-08 16:21:28 +03:00
585aafc27e
docs/pyb.ExtInt,pyb.Pin: Mark up class methods as such.
2016-06-08 16:00:12 +03:00
0d8c22b122
docs/pyb.Pin: af_list() is a normal method, not a class method.
2016-06-08 15:57:46 +03:00
8171995ee9
docs/pyb.CAN: Mark CAN.initfilterbanks() as classmethod explicitly.
2016-06-08 15:49:30 +03:00
bba77a2d01
docs/machine.Pin: Add class designator to all constants.
...
This makes rendered docs to not provide incorrect information and
consistent with how it's down for other machine classes.
2016-06-08 01:37:03 +03:00
7d7243f44c
docs/machine.*: Use proper class case in method headers.
...
Class designator will be used as is in indexes, so must match actual class
name.
2016-06-08 01:33:49 +03:00
93968bd6fb
docs/machine.UART: Cleanup pyboard section.
2016-06-08 01:32:16 +03:00
0a4361ca67
docs/machine.Pin: Remove explicit target.
...
With currentmodule:: support, all targets should be generated properly by
Sphinx.
2016-06-08 01:13:59 +03:00
0a4cc24b2e
docs/pyb.*: Add "currentmodule:: pyb" directive.
...
Makes sure that classes described in these separate files are properly
designated as belonging to "pyb" module in indexes.
2016-06-08 00:57:41 +03:00
c8b7628094
docs/machine.*: Add "currentmodule:: machine" directive.
...
Makes sure that classes described in these separate files are properly
designated as belonging to "machine" module in indexes.
2016-06-08 00:46:27 +03:00
2c5fc681c8
docs/library/machine.Pin: Mention GPIO and cross-link .value() function.
2016-06-07 17:49:00 +03:00
6e2fa5237d
docs/usocket: There must be empty line after .only:: .
2016-06-07 17:41:21 +03:00
9b18811951
docs/ure: Typo fix.
2016-06-07 08:53:54 +03:00
753a965363
docs/esp.socket: Remove unused file.
2016-06-07 02:40:05 +03:00
9487b80666
docs/library/network: wipy: Fix literal block indentation.
2016-06-07 02:07:08 +03:00
2bf6eb9fe2
docs: Add link to PDF version of docs in sidebar.
...
Requires a link of the form: <BASEURL>/<lang>/<ver>/micropython-<port>.pdf
2016-06-06 11:37:40 +01:00
0b913bd09f
docs/esp8266/tutorial/network_basics: Minor typo fix, ap becomes ap_if.
2016-06-06 10:08:30 +01:00
9b39263b11
docs: Bump version to 1.8.1.
2016-06-03 15:45:43 +01:00
3f6ca4b22c
docs/esp8266/general: Add note about RTC overflow.
2016-06-03 14:37:49 +01:00
d8cc51ea2b
docs/esp8266/quickref: Update WebREPL section for 1.8.1 release.
...
WebREPL is much more stable now.
2016-06-02 20:11:40 +03:00
ed4e5d2583
docs/library/index: Fix grammar and spelling in intro paragraph.
2016-06-02 11:05:13 +01:00
0b9725812e
docs/wipy/tutorial: Add note about screen key bindings on OS X.
2016-06-02 00:13:21 +03:00
e456b2cc94
docs/README: Add some hints for PDF docs generation.
2016-06-02 00:08:47 +03:00
09f764dc04
docs/library/index: Add intro paragraph regarding availability of modules.
...
This introductions makes explicit the fact that whenever possible,
the documentation describes full MicroPython functionality, and arbitrary
functions/classes/modules may be missing in a paricular port or build.
2016-06-02 00:08:07 +03:00
9a1a49ceec
esp8266/general: Typo/grammar fixes.
2016-06-01 23:16:17 +03:00
fdf45a718b
esp8266/quickref: Use local image of Adafruit Huzzah board.
...
Using remote image causes problems with tools (partly because the image
is semi-firewalled and can't be accessed by arbitrary tools).
2016-06-01 23:11:49 +03:00
c4ab8895e8
docs: math, cmath: Add port availability information.
2016-06-01 22:12:39 +03:00
1a05a59116
docs/math: Typo fix.
2016-06-01 22:09:51 +03:00
93a9c2e840
docs/library/machine: Add documentation for machine.time_pulse_us.
2016-05-31 14:06:33 +01:00
641300dccb
stmhal/dac: DAC deinit() method added.
2016-05-31 13:10:35 +03:00
7d4fd8b6db
docs/esp8266/general: Remove duplicate phrase.
2016-05-30 19:20:11 +03:00
a3dc2c6031
docs/machine: Make disable_irq and enable_irq docs available for all.
2016-05-26 15:47:47 +01:00
eaecc4c02e
docs/esp8266/general: Grammar fixes.
2016-05-23 23:33:23 +03:00
3e33aeb0db
docs: esp8266: Include ussl module in the docs.
2016-05-22 23:57:26 +03:00
bca4c9e465
docs/ussl: Add basic description of axTLS-based modussl.
...
In particular, disclose the fact that server certificates are not
validated.
2016-05-22 23:56:22 +03:00
a0a08b4be1
esp8266: Add APA102 serial individually controllable LEDs support.
...
APA102 is a new "smart LED", similar to WS2812 aka "Neopixel".
2016-05-19 22:29:11 +03:00
ca63c77073
docs/ustruct: Describe supported type codes.
2016-05-14 20:48:43 +03:00
ccb00b7724
docs/esp8266/quickstart: remove i2c examples with stop=False
...
Since the ``stop`` parameter has been dropped.
2016-05-14 00:02:02 +02:00
9b4502b7e8
docs/esp8266/tutorial: Fix typo in do_connect() network example.
...
Fixes issue #2065 .
2016-05-11 13:40:28 +01:00
e89413e9b0
docs/esp8266/quickref: New way to get MAC address
2016-05-10 00:31:57 +02:00
c156e89379
Fix ESP8266 Network tutorial
...
The socket should either connect to `addr` or `addr_info[0][-1]`. Not to `addr[0][-1]`.
2016-05-07 23:24:24 -07:00
0c86a9471a
docs/machine.UART: Filter out unimplemented UART methods from esp8266 docs.
2016-05-07 20:20:04 +03:00
2c2fc070ec
docs: Bump version to 1.8.
2016-05-03 17:32:32 +01:00
56fd33a6dd
docs/esp8266/tutorial: Change name of ESP8266 firmware to match actual.
2016-05-03 16:42:52 +01:00
c68c327310
docs/esp8266/tutorial/repl: Reword description of initial WebREPL setup a bit.
2016-05-03 18:40:16 +03:00
1f396c58d9
docs/esp8266/tutorial/repl: Suggest using hosted WebREPL client.
...
At http://micropython.org/webrepl .
2016-05-03 18:35:43 +03:00
5d05993f10
esp8266/tutorial: Mention that esptool is available via pip.
2016-05-03 14:05:50 +01:00
8af64bcf2b
docs/esp8266/tutorial: Update pins tutorial to reflect changes in API.
2016-05-03 13:56:15 +01:00
5036b6ad18
docs/library/machine.Pin: Update pin docs to reflect ESP8266 support.
2016-05-03 13:55:37 +01:00
81a99eb388
docs/machine: idle() description generalization.
2016-05-03 12:53:57 +03:00
bb6458bf43
docs/machine: More generic description of sleep's, WiPy details to its genref.
2016-05-03 12:48:20 +03:00
db99ae00a2
docs/machine: Move WiPy-specific hardware details to its general reference.
2016-05-03 12:26:55 +03:00
06ec96b47b
docs/machine: Generalize docs from just WiPy to other ports.
2016-05-03 12:15:29 +03:00
879bc4197a
docs/esp8266: Add ESP8266 tutorial.
2016-05-03 01:39:04 +01:00
a6cf45864f
docs/network: esp8266: MAC address is set via .config() method.
2016-05-03 01:04:40 +03:00
ae845f13de
docs: Use getaddrinfo() result in easy way.
...
Instead of extracting 4th element, extact last. Much easier to remember!
2016-05-03 00:48:04 +03:00
5302c3e8c4
docs/esp8266_contents: Referebce general and tutorial docs.
2016-05-02 17:45:42 +03:00
a22aa53ef1
docs/esp8266/general: Add "Boot process" section.
2016-05-02 17:41:08 +03:00
12144e8fcd
docs/esp8266/general: Add techspec section.
...
Link to vendor forum with datasheets, etc. is provided, as well as inline
TTX.
2016-05-02 17:12:25 +03:00
0f682f1ee1
docs/esp8266/general: Fix list formatting.
2016-05-02 16:10:48 +03:00
5aa4db0505
docs/esp8266/general: Add more points to "Multitude of boards" section.
2016-05-02 16:00:44 +03:00
74c6363b97
docs/esp8266/general: WebREPL is described in quickref for now.
2016-05-02 15:26:40 +03:00
c816b89353
docs/library/machine.I2C: Update to reflect ESP8266 implementation.
...
This machine.I2C documentation is now closer to a more port-neutral
description, although there are still differences between WiPy and
ESP8266.
2016-05-02 12:31:17 +01:00
621c644205
docs: _io and _collections were renamed to have standard "u" prefix.
2016-05-02 14:02:54 +03:00
70ff7350e7
stmhal, cc3200: Change i2c.scan() method to scan addresses 0x08-0x77.
...
A standard I2C address is 7 bits but addresses 0b0000xxx and 0b1111xxx
are reserved. The scan() method is changed to reflect this, along with
the docs.
2016-05-02 11:15:36 +01:00
8ebdbcfb27
docs: Add _io module reference.
2016-05-02 00:39:36 +03:00
348caaf940
docs: Add _collections module reference.
2016-05-02 00:36:58 +03:00
fd283eba64
docs/sys: Describe sys.platform is port-neutral manner.
2016-05-01 14:39:38 +03:00
e9b7610748
docs/sys: Describe sys.maxsize.
2016-05-01 14:31:08 +03:00
59603a2e89
docs/sys: Describe sys.implementation.
2016-05-01 13:59:34 +03:00
4fb9452bff
docs/sys: Clean up print_exception() description.
2016-05-01 13:44:06 +03:00
ad2889c141
docs/sys: Clarify description of sys.exit().
2016-05-01 13:42:36 +03:00
8ad1659f68
docs/sys: Make module variable descriptions proper sentences.
2016-05-01 13:38:45 +03:00
7781caf8d3
docs/sys: Remove port-specific details from description of stdin/out/err.
2016-05-01 13:37:28 +03:00
c468fe65c5
docs/ustruct: Fix argument formatting.
...
Per current CPython docs conventions, arguments are in italics. Follow
that.
2016-05-01 13:34:16 +03:00
a9ed42b3b4
docs/sys: Document sys.modules.
2016-05-01 13:32:15 +03:00
6b6acc5b5d
docs/ustruct: Document pack_into(), unpack_from().
2016-05-01 13:17:07 +03:00
d46cd02d95
docs/esp8266/quickref: Add info about WebREPL.
2016-05-01 11:41:46 +03:00
83e99f88cb
docs/utime: Clarify module purpose.
2016-05-01 01:48:30 +03:00
613fd0a1ca
docs/library/utime: Elaborate on epochs and calendar time maintenance.
2016-05-01 00:16:47 +03:00
348edad888
docs/esp8266: Update quickref to reflect changes to 1-wire and NeoPixel.
2016-04-28 14:31:37 +01:00
37d5aa1377
docs: Make the short port names in the port/version sidebar lowercase.
...
To make it neater and simpler.
2016-04-28 12:34:59 +01:00
6d8156ae28
docs/network: esp8266: Describe wlan.config() method.
2016-04-28 00:11:55 +03:00
06deec9d35
docs/network: esp8266: Add wlan.ifconfig() method.
2016-04-28 00:10:29 +03:00
1b45670c69
docs/ubinascii: Clean up grammar.
2016-04-27 15:47:33 +03:00
df4e1d1279
docs/library: Consistently use admonitions for CPython differences.
2016-04-27 15:43:48 +03:00
31300b5144
docs/utime: Describe sleep() peculiarities in MicroPython.
...
Not all ports accept floating-point value.
2016-04-27 15:28:46 +03:00
c564169c8f
docs/utime: Describe time() peculiarities in MicroPython.
2016-04-27 15:23:11 +03:00
556e5dfd35
docs/library/utime: Add more time functions for unix and esp8266 ports.
2016-04-27 12:30:59 +01:00
e0f7e001e8
docs: Fix uos and utime heading underlines to be the correct length.
...
Otherwise Sphinx gives a warning.
2016-04-27 12:11:27 +01:00
351ec6d4ab
docs/library: "os" module is actually "uos".
2016-04-27 01:55:06 +03:00
f3f5e975e4
docs/Makefile: Default BUILDDIR based on MICROPY_PORT.
...
It doesn't make sense to duplicate both on command line, and MICROPY_PORT
is effectively mandatory to build docs.
2016-04-27 01:50:05 +03:00
0df2ee0126
docs/library/index: Order sections from the most to least standard modules.
2016-04-27 01:38:59 +03:00
492bf12499
docs/library/index: Make single section for "micro-ified" modules.
...
Even the modules whose names don't start with "u" prefix are micro-ified
anyway, i.e. provide only subset of CPython's functionality (and sometimes
extensions to it). So, it doesn't make much sense to devide them by
criteria of having/not having "u" prefix.
2016-04-27 01:38:59 +03:00
678f3a1e05
docs: Module "time" is actually "utime".
2016-04-27 01:38:59 +03:00
a119983328
docs/library/index: esp8266 has the same set of stdlibs as pyboard/unix.
2016-04-27 01:17:28 +03:00
88ed518390
docs/library/index: Move WiPy "micro-libraries" under corresponding heading.
2016-04-27 01:14:16 +03:00
8b8c32c09b
docs/library: Group MicroPython-specific modules under separate heading.
2016-04-27 01:11:24 +03:00
650df97c06
docs/network: esp8266: scan(): Add note that bssid is bytes object.
2016-04-26 01:09:11 +03:00
0d10e5310a
docs/usocket: Describe address format once at the beginning.
...
Different ports may have different formats.
2016-04-23 00:31:05 +03:00
92497bff94
docs/usocket: socket.IPPROTO_SEC is WiPy-specific.
2016-04-23 00:17:34 +03:00
955b8526f4
docs/usocket: Socket-specific exceptions are for WiPy only.
2016-04-23 00:17:09 +03:00
71c6f93016
docs/library/usocket: Add link to CPython's socket module.
2016-04-23 00:08:43 +03:00
bbe5245028
docs: esp8266: Include usocket module reference.
2016-04-23 00:08:11 +03:00
3bc9b571bb
docs/ustruct: There's no complete "struct" module, only "ustruct" subset.
...
"ustruct" is good example of micro-ified module, so rather should belong
to the corresponding list.
2016-04-22 22:37:14 +03:00
5c8147528e
docs/esp8266/tutorial: Add tutorial placeholder page.
2016-04-22 22:37:02 +03:00
fcc9d43c6d
docs/esp8266: Add info about using deep-sleep mode to quickref.
2016-04-21 12:01:50 +01:00
2a51f72ed1
docs/esp8266/general: Start "General information" for esp8266.
2016-04-21 01:03:51 +03:00
f73d78394b
docs/topindex.html: esp8266: Enable quickref/general on the main page.
2016-04-21 01:03:27 +03:00
67ece47121
docs/machine: reset_cause() has been implemented for esp8266.
2016-04-17 17:40:08 +03:00
53ac7830cb
docs/speed_python: Add article.
2016-04-15 20:09:59 +03:00
5801967496
docs/speed_python: Add many more details on memoryviews.
2016-04-15 18:18:18 +03:00
47f9b10b30
docs/speed_python: Generalize "Floating point" subsection.
...
Don't describe just single port's peculiarities, note aboute possible
array of issues with floating-point.
2016-04-15 17:43:03 +03:00
6c84f1e03a
docs/speed_python: Clarify/generalize "Buffers" subsection.
2016-04-15 17:24:56 +03:00
f474e956d7
docs/machine: Start to update for esp8266 port.
2016-04-15 17:06:11 +03:00
b122ed0732
docs/esp: Enumerate flash access functions.
2016-04-15 14:01:22 +03:00
22cbcd55f0
stmhal: Properly handle RTS/CTS flow control for buf/unbuf transfers.
...
Fixes issues #1912 and #1913 . UART documentation is also updated.
2016-04-13 08:42:32 +01:00
9b0a150bd6
docs: Bump version to 1.7.
2016-04-11 12:18:10 +01:00
9c04299da1
docs: esp8266: Enable "machine" module docs.
...
The docs are still heavily biased towards WiPy, so will need a lot of
exclusions.
2016-04-07 16:44:10 +03:00
5e7fa7c80c
docs/ubinascii: Document non-standard "sep" argument to hexlify().
2016-04-07 12:39:00 +03:00
e4cb7c6158
docs/esp8266/quickref: Add note about physical vs logical pin numbers.
2016-04-05 16:30:51 +03:00
f81ea6307c
docs/ubinascii: Document a2b_base64(), b2a_base64().
2016-04-05 14:00:12 +03:00
28d4b94dce
docs/machine: Change wording to be a bit more port-neutral.
2016-04-03 20:49:29 +03:00
69b702276b
docs/os: Change wording to be a bit more port-neutral.
2016-04-03 20:49:25 +03:00
e24674d44e
docs: esp8266: esp.socket is deprecated, remove from docs.
2016-04-03 20:19:39 +03:00
254a5646c1
docs: Update copyright notice.
2016-04-03 00:05:23 +03:00
f50d9477c1
docs: network: esp8266: .scan() is now synchronous and returns result list.
2016-03-30 11:56:20 +03:00
d7019d0628
docs: network: esp8266: status is WLAN object method.
2016-03-30 11:53:45 +03:00
193795398d
docs: Correct pin interrupt example code for the WiPy.
2016-03-28 13:12:58 +02:00
87c783b454
docs/esp8266: esp.mac() replaced with network.WLAN.mac().
2016-03-27 06:59:39 +03:00
679fe0abae
docs/esp8266: esp.wifi_mode() replaced with network.WLAN.active().
2016-03-27 06:59:00 +03:00
eda8746324
docs/esp8266: phy_mode() moved to network module.
2016-03-27 06:58:06 +03:00
0cb10b5220
docs/esp8266/quickref: Add note about GPIO16.
2016-03-25 16:48:15 +02:00
159f1aaca8
docs/esp8266/quickref: Note that timers supported are virtual ones.
2016-03-25 16:44:13 +02:00
e589cddcd4
docs/esp: Remove getaddrinfo(), now in socket module as expected.
2016-03-25 16:39:18 +02:00
6e6488530e
docs: More standard modules for esp8266.
2016-03-25 16:33:05 +02:00
4b5606bc09
docs/network: esp8266: Update docs on WLAN constructor.
2016-03-25 16:30:06 +02:00
ee6fcc6f91
docs: Add standard modules list for esp8266.
2016-03-25 15:17:55 +02:00
96a644076d
docs/topindex.html: Refer to "pyb" module only for pyboard.
2016-03-25 15:12:26 +02:00
2b302dad51
docs: Update pyb.UART.any() to mention that it returns character count.
2016-03-17 20:19:36 +00:00
6d5a549067
docs: Mention that pyb.SPI constructor accepts "X" and "Y" arguments.
2016-03-17 20:19:08 +00:00
b8133c4c0f
docs: Update pyb.I2C constructor to reflect changes in Pyboard Lite.
2016-03-17 20:18:36 +00:00
4a6cac4643
docs: Update asm tutorial, maximum number of allowed args is now 4.
2016-03-17 20:17:40 +00:00
2466cb67f8
docs/esp8266: Update quick reference: i2c.readfrom and neopixel example.
2016-03-16 13:37:39 +00:00
21b74604f9
docs: Add Python speed optimisation guide, including minimal viper ref.
2016-03-11 16:33:36 +00:00
85d3b6165a
docs: Update details on using ADCAll object for vref/vbat channels.
2016-03-11 16:33:09 +00:00
70f32f0f73
docs: Update asm_thumb2_hints_tips re return type of asm funcs.
2016-03-11 16:32:42 +00:00
6b80ebe32e
docs/esp8266: Fix indent errors, typos, and add info about REPL UART.
2016-03-09 13:01:32 +00:00
42ef5a1567
docs: Allow list of versions to be specified by environment variable.
2016-03-09 12:43:22 +00:00
5b74bba3a3
docs: Add versions.html template and support code for a version sidebar.
2016-03-09 12:15:47 +00:00
4b6077b3fe
docs/esp8266: Minor tweaks to quickref, Timer and I2C classes.
2016-03-09 11:02:38 +00:00
809fbeefb7
docs: Add esp8266 quick reference page, with basic info.
2016-03-08 23:06:15 +00:00
6bb9d3ea3e
docs/uctypes.rst: Fix typo (steamlined -> streamlined).
2016-03-02 00:25:10 +02:00
57b96a7be2
docs: Correct machine.Timer code examples related to duty cycle.
2016-02-23 20:22:26 +01:00
8e1fdf2eb3
docs: Add note on machine.Timer class regarding PWM output pins.
2016-02-23 19:53:59 +01:00
add930c4b5
cc3200: Rename 'server' class to 'Server' for consistency.
2016-02-22 22:54:34 +01:00
12547ce737
docs: Minor change to improve clarity in machine.Timer docs.
2016-02-22 19:16:30 +01:00
0d210a0be8
docs: Correct WiPy Timer docs.
2016-02-21 21:53:20 +01:00
73c9f85b4c
cc3200: Simplify the Timer API and correct the documents.
...
Make the PWM duty cycle configurable from 0.00 to 100.00 by
accepting values from 0 to 10000.
Add automatic Pin assignment when operating in PWM mode.
2016-02-21 21:53:16 +01:00
331a48195d
docs: Bump version to 1.6.
2016-01-31 23:22:41 +00:00
0f87a010e3
docs: Update to say that Timer(3) is free, and detail LED intensity.
2016-01-29 23:06:13 +00:00
c13b2f2d00
docs: Several minor changes: network, pyb, ADCAll and inline asm.
2016-01-13 21:53:26 +00:00
ea8be373a9
py/inlinethumb: Remove 30-bit restriction on movwt instruction.
...
movwt can now move a full 32-bit constant into a register.
2016-01-07 16:34:11 +00:00
67f40fb237
docs: Include extra functions in time documentation for pyboard.
2016-01-04 22:57:21 +00:00
1d191fdf03
docs: Add link from pyboard switch tutorial to ISR rules document.
2016-01-04 16:18:44 +00:00
824f83fd20
docs: Set author as 'Damien P. George and contributors'.
2016-01-03 22:17:00 +02:00
275a0f25d3
docs: Fix readthedocs build by updating Latex params.
2016-01-03 22:15:07 +02:00
ed584e2ffd
docs: Bump version to 1.5.2.
2015-12-31 14:43:19 +00:00
521759ee18
docs: Add discussion on interrupt handlers incl uPy specific techniques.
2015-12-31 00:02:09 +00:00
67a5bfc6d8
docs/library: Add network server example.
2015-12-16 22:35:14 +01:00
4dea24e105
docs: Bump version to 1.5.1.
2015-11-23 21:27:33 +00:00
426f326d35
docs/wipy: Make wifi/wlan naming consistent with tutorial.rst.
2015-11-18 20:02:07 +01:00
9142179f81
docs/wipy: Add warning about losing wlan connection when changing mode.
...
Also provide workarounds, link to other revelant sections,
and fix some typos.
2015-11-18 19:55:55 +01:00
00960133c2
docs: Update docs for WiPy wlan.connect().
...
- The link establishment timeout is infinite by default
- Fix typo in notes about the auth kwarg
2015-11-18 19:47:40 +01:00
f3308daa6f
docs/wipy: Fixed some typos in the WiPy's tutorials.
2015-11-18 19:40:29 +01:00
3551368424
docs: Fix a typo in the REPL documentation.
2015-11-10 22:19:20 +02:00
549c79d11e
docs/select: Document POLLIN/OUT/ERR/HUP.
2015-11-09 22:10:32 +02:00
b7ca945877
lib/mp-readline: Make it easy to exit auto-indent mode by pressing enter.
...
This patch allows you to stop auto-indent by pressing enter on a second
blank line. Easier than having to use backspace, and prevents new users
from getting stuck in auto-indent mode.
2015-11-07 13:07:43 +00:00
a9f3030371
docs: Add docs about REPL paste-mode and Control-C
2015-11-03 23:28:53 +00:00
98fb0bf68a
docs: Move instructions on generating the documentation to docs/README.md
2015-11-03 23:28:27 +00:00
43efb46328
docs/library/index.rst: Minimally adapt for unix port.
2015-10-31 01:15:25 +03:00
c6bc5b69c2
docs: Actually add unix port indexes, so docs for it could be generated.
2015-10-31 01:00:03 +03:00
98b6d35c4f
docs: select: Describe poll.poll() return value in detail.
2015-10-29 22:08:10 +03:00
9011815d86
docs/wipy: Fix bug in example code and add note regarding OTA.
2015-10-26 23:51:27 +01:00
a13d22f921
docs/wipy: Fix several typos and change some pyboard to WiPy.
2015-10-26 23:36:51 +01:00
c773053f58
docs/wipy: Fix several typos.
2015-10-25 21:32:18 +01:00
359a8aa760
docs/wipy: Fix error in WLAN quickref.
2015-10-25 21:31:42 +01:00
b7ab70c71c
docs: USB_VCP: Always in non-blocking mode, clarify stream method returns.
...
They return None if no data available.
2015-10-25 13:24:29 +03:00
cf6daa0966
docs: Explicitly specify behavior of UART stream protocol methods on timeout.
2015-10-25 08:25:34 +03:00
ee7bebc94f
docs: Correct machine.RTC examples.
2015-10-22 20:23:28 +02:00
4efed58df1
docs: Fix typos on wipy docs.
2015-10-22 16:35:04 +02:00
9273cca432
docs/wipy: Correct typo in safe boot description.
2015-10-22 00:31:22 +02:00
126373ac70
docs/wipy: Remove windows instructions that refer to the pyboard.
2015-10-21 23:22:16 +02:00
e954604ae0
docs: Add remark about ssl sockets and standard sockets.
2015-10-21 22:52:36 +02:00
fe08e3a54f
docs: Bump version to 1.5.
2015-10-21 16:58:52 +01:00
3b24e83731
docs/wipy: Fix formatting indentation.
2015-10-21 15:43:02 +02:00
bb489066e8
docs/wipy: Remove incorrect references to usb configuration.
2015-10-21 15:41:36 +02:00
109b363ddc
docs/wipy: Add more tutorials and examples.
2015-10-21 15:30:57 +02:00
ee0058d174
docs: Remove remaining references to 'af', which is now 'alt'.
2015-10-21 15:30:57 +02:00
ceb169008d
docs: Several corrections to the classes in the machine module.
2015-10-21 15:30:56 +02:00
04db848dc7
docs: Add usocket and ussl modules' documentation.
2015-10-21 15:30:56 +02:00
9c72c71c05
cc3200: WLAN class can retrieve the existing instance.
2015-10-19 21:17:15 +02:00
8faf2dc75b
docs/wipy: Add wipy tutorials section.
2015-10-19 21:17:15 +02:00
36ae417c9f
docs: Add wipy and network.server documentation.
2015-10-19 21:17:15 +02:00
020386b61c
docs: In top index fix machine module link for the WiPy.
2015-10-18 00:31:12 +02:00
4542643025
docs: Update all WiPy docs to reflect the new API.
2015-10-17 23:29:04 +02:00
d6442407f5
docs: Fix formatting of DAC code examples.
2015-10-13 14:44:00 +01:00
Peter Hinch
Damien George
Paul Sokolovsky
Philip Potter
Radomir Dopieralski
Mike Causer
Martin Müller
Ben Hagen
puuu
Marcel Stör
Tomas R
mad474
misterdanb
Paulus Schoutsen
danicampora
Noah Rosamilia
Henrik Sölver
Chris Liechti
Jason Hildebrand
Noah
Dave Hylands
Martijn Koster