254 lines
8.1 KiB
C
254 lines
8.1 KiB
C
/*
|
|
* Copyright (c) 2016, Freescale Semiconductor, Inc.
|
|
* Copyright 2016-2021 NXP
|
|
* All rights reserved.
|
|
*
|
|
* SPDX-License-Identifier: BSD-3-Clause
|
|
*/
|
|
|
|
#include "fsl_clock.h"
|
|
#include "flexspi_hyper_flash.h"
|
|
|
|
// Copy of a few (pseudo-)functions from fsl_clock.h, which were nor reliably
|
|
// inlined when they should be. That caused DEBUG mode to fail.
|
|
// It does not increase the code size, since they were supposed to be inline.
|
|
|
|
__attribute__((always_inline)) static inline void clock_set_div(clock_div_t divider, uint32_t value) {
|
|
uint32_t busyShift;
|
|
|
|
busyShift = CCM_TUPLE_BUSY_SHIFT(divider);
|
|
CCM_TUPLE_REG(CCM, divider) = (CCM_TUPLE_REG(CCM, divider) & (~CCM_TUPLE_MASK(divider))) |
|
|
(((uint32_t)((value) << CCM_TUPLE_SHIFT(divider))) & CCM_TUPLE_MASK(divider));
|
|
|
|
/* Clock switch need Handshake? */
|
|
if (CCM_NO_BUSY_WAIT != busyShift) {
|
|
/* Wait until CCM internal handshake finish. */
|
|
while (CCM->CDHIPR & (1U << busyShift)) {
|
|
}
|
|
}
|
|
}
|
|
|
|
__attribute__((always_inline)) static inline void clock_control_gate(clock_ip_name_t name, clock_gate_value_t value) {
|
|
uint32_t index = ((uint32_t)name) >> 8U;
|
|
uint32_t shift = ((uint32_t)name) & 0x1FU;
|
|
volatile uint32_t *reg;
|
|
|
|
reg = ((volatile uint32_t *)&CCM->CCGR0) + index;
|
|
*reg = ((*reg) & ~(3U << shift)) | (((uint32_t)value) << shift);
|
|
}
|
|
|
|
__attribute__((always_inline)) static inline void clock_enable_clock(clock_ip_name_t name) {
|
|
clock_control_gate(name, kCLOCK_ClockNeededRunWait);
|
|
}
|
|
|
|
__attribute__((always_inline)) static inline void clock_disable_clock(clock_ip_name_t name) {
|
|
clock_control_gate(name, kCLOCK_ClockNotNeeded);
|
|
}
|
|
|
|
#define DIV_PAGE_PGM 4
|
|
#define DIV_ERASE_PGM 4
|
|
#define DIV_READ 0
|
|
|
|
static void SetFlexSPIDiv(uint32_t div) __attribute__((section(".ram_functions")));
|
|
static void SetFlexSPIDiv(uint32_t div) {
|
|
FLEXSPI_Enable(BOARD_FLEX_SPI, false);
|
|
clock_disable_clock(kCLOCK_FlexSpi);
|
|
clock_set_div(kCLOCK_FlexspiDiv, div); /* flexspi clock 332M, DDR mode, internal clock 166M. */
|
|
clock_enable_clock(kCLOCK_FlexSpi);
|
|
FLEXSPI_Enable(BOARD_FLEX_SPI, true);
|
|
}
|
|
|
|
status_t flexspi_nor_hyperbus_read(FLEXSPI_Type *base, uint32_t addr, uint32_t *buffer, uint32_t bytes) __attribute__((section(".ram_functions")));
|
|
status_t flexspi_nor_hyperbus_read(FLEXSPI_Type *base, uint32_t addr, uint32_t *buffer, uint32_t bytes) {
|
|
flexspi_transfer_t flashXfer;
|
|
status_t status;
|
|
|
|
flashXfer.deviceAddress = addr * 2;
|
|
flashXfer.port = kFLEXSPI_PortA1;
|
|
flashXfer.cmdType = kFLEXSPI_Read;
|
|
flashXfer.SeqNumber = 1;
|
|
flashXfer.seqIndex = HYPERFLASH_CMD_LUT_SEQ_IDX_READDATA;
|
|
flashXfer.data = buffer;
|
|
flashXfer.dataSize = bytes;
|
|
status = FLEXSPI_TransferBlocking(base, &flashXfer);
|
|
|
|
return status;
|
|
}
|
|
|
|
status_t flexspi_nor_hyperbus_write(FLEXSPI_Type *base, uint32_t addr, uint32_t *buffer, uint32_t bytes) __attribute__((section(".ram_functions")));
|
|
status_t flexspi_nor_hyperbus_write(FLEXSPI_Type *base, uint32_t addr, uint32_t *buffer, uint32_t bytes) {
|
|
flexspi_transfer_t flashXfer;
|
|
status_t status;
|
|
|
|
flashXfer.deviceAddress = addr * 2;
|
|
flashXfer.port = kFLEXSPI_PortA1;
|
|
flashXfer.cmdType = kFLEXSPI_Write;
|
|
flashXfer.SeqNumber = 1;
|
|
flashXfer.seqIndex = HYPERFLASH_CMD_LUT_SEQ_IDX_WRITEDATA;
|
|
flashXfer.data = buffer;
|
|
flashXfer.dataSize = bytes;
|
|
status = FLEXSPI_TransferBlocking(base, &flashXfer);
|
|
|
|
return status;
|
|
}
|
|
|
|
status_t flexspi_nor_write_enable(FLEXSPI_Type *base, uint32_t baseAddr) __attribute__((section(".ram_functions")));
|
|
status_t flexspi_nor_write_enable(FLEXSPI_Type *base, uint32_t baseAddr) {
|
|
flexspi_transfer_t flashXfer;
|
|
status_t status;
|
|
|
|
/* Write enable */
|
|
flashXfer.deviceAddress = baseAddr;
|
|
flashXfer.port = kFLEXSPI_PortA1;
|
|
flashXfer.cmdType = kFLEXSPI_Command;
|
|
flashXfer.SeqNumber = 2;
|
|
flashXfer.seqIndex = HYPERFLASH_CMD_LUT_SEQ_IDX_WRITEENABLE;
|
|
|
|
status = FLEXSPI_TransferBlocking(base, &flashXfer);
|
|
|
|
return status;
|
|
}
|
|
|
|
status_t flexspi_nor_wait_bus_busy(FLEXSPI_Type *base) __attribute__((section(".ram_functions")));
|
|
status_t flexspi_nor_wait_bus_busy(FLEXSPI_Type *base) {
|
|
/* Wait status ready. */
|
|
bool isBusy;
|
|
uint32_t readValue;
|
|
status_t status;
|
|
flexspi_transfer_t flashXfer;
|
|
|
|
flashXfer.deviceAddress = 0;
|
|
flashXfer.port = kFLEXSPI_PortA1;
|
|
flashXfer.cmdType = kFLEXSPI_Read;
|
|
flashXfer.SeqNumber = 2;
|
|
flashXfer.seqIndex = HYPERFLASH_CMD_LUT_SEQ_IDX_READSTATUS;
|
|
flashXfer.data = &readValue;
|
|
flashXfer.dataSize = 2;
|
|
|
|
do {
|
|
status = FLEXSPI_TransferBlocking(base, &flashXfer);
|
|
|
|
if (status != kStatus_Success) {
|
|
return status;
|
|
}
|
|
if (readValue & 0x8000) {
|
|
isBusy = false;
|
|
} else {
|
|
isBusy = true;
|
|
}
|
|
|
|
if (readValue & 0x3200) {
|
|
status = kStatus_Fail;
|
|
break;
|
|
}
|
|
|
|
} while (isBusy);
|
|
|
|
return status;
|
|
}
|
|
|
|
status_t flexspi_nor_flash_erase_sector(FLEXSPI_Type *base, uint32_t address) __attribute__((section(".ram_functions")));
|
|
status_t flexspi_nor_flash_erase_sector(FLEXSPI_Type *base, uint32_t address) {
|
|
status_t status;
|
|
flexspi_transfer_t flashXfer;
|
|
|
|
/* Write enable */
|
|
status = flexspi_nor_write_enable(base, address);
|
|
|
|
if (status != kStatus_Success) {
|
|
return status;
|
|
}
|
|
|
|
flashXfer.deviceAddress = address;
|
|
flashXfer.port = kFLEXSPI_PortA1;
|
|
flashXfer.cmdType = kFLEXSPI_Command;
|
|
flashXfer.SeqNumber = 4;
|
|
flashXfer.seqIndex = HYPERFLASH_CMD_LUT_SEQ_IDX_ERASESECTOR;
|
|
status = FLEXSPI_TransferBlocking(base, &flashXfer);
|
|
|
|
if (status != kStatus_Success) {
|
|
return status;
|
|
}
|
|
|
|
status = flexspi_nor_wait_bus_busy(base);
|
|
|
|
return status;
|
|
}
|
|
|
|
status_t flexspi_nor_flash_erase_block(FLEXSPI_Type *base, uint32_t address) __attribute__((section(".ram_functions")));
|
|
status_t flexspi_nor_flash_erase_block(FLEXSPI_Type *base, uint32_t address) {
|
|
return flexspi_nor_flash_erase_sector(base, address); // HyperFlash does not support block erase!
|
|
}
|
|
|
|
status_t flexspi_nor_flash_page_program(FLEXSPI_Type *base, uint32_t address, const uint32_t *src, uint32_t size) __attribute__((section(".ram_functions")));
|
|
status_t flexspi_nor_flash_page_program(FLEXSPI_Type *base, uint32_t address, const uint32_t *src, uint32_t size) {
|
|
status_t status;
|
|
flexspi_transfer_t flashXfer;
|
|
|
|
/* Speed down flexspi clock */
|
|
SetFlexSPIDiv(DIV_PAGE_PGM);
|
|
|
|
/* Write enable */
|
|
status = flexspi_nor_write_enable(base, address);
|
|
|
|
if (status != kStatus_Success) {
|
|
return status;
|
|
}
|
|
|
|
/* Prepare page program command */
|
|
flashXfer.deviceAddress = address;
|
|
flashXfer.port = kFLEXSPI_PortA1;
|
|
flashXfer.cmdType = kFLEXSPI_Write;
|
|
flashXfer.SeqNumber = 2;
|
|
flashXfer.seqIndex = HYPERFLASH_CMD_LUT_SEQ_IDX_PAGEPROGRAM;
|
|
flashXfer.data = (uint32_t *)src;
|
|
flashXfer.dataSize = size;
|
|
status = FLEXSPI_TransferBlocking(base, &flashXfer);
|
|
|
|
if (status != kStatus_Success) {
|
|
return status;
|
|
}
|
|
|
|
status = flexspi_nor_wait_bus_busy(base);
|
|
|
|
SetFlexSPIDiv(DIV_READ);
|
|
|
|
return status;
|
|
}
|
|
|
|
status_t flexspi_nor_hyperflash_cfi(FLEXSPI_Type *base) __attribute__((section(".ram_functions")));
|
|
status_t flexspi_nor_hyperflash_cfi(FLEXSPI_Type *base) {
|
|
/*
|
|
* Read ID-CFI Parameters
|
|
*/
|
|
// CFI Entry
|
|
status_t status;
|
|
uint32_t buffer[2];
|
|
uint8_t data[4] = {0x00, 0x98};
|
|
status = flexspi_nor_hyperbus_write(base, 0x555, (uint32_t *)data, 2);
|
|
if (status != kStatus_Success) {
|
|
return status;
|
|
}
|
|
|
|
// ID-CFI Read
|
|
// Read Query Unique ASCII String
|
|
status = flexspi_nor_hyperbus_read(base, 0x10, &buffer[0], sizeof(buffer));
|
|
if (status != kStatus_Success) {
|
|
return status;
|
|
}
|
|
buffer[1] &= 0xFFFF;
|
|
// Check that the data read out is unicode "QRY" in big-endian order
|
|
if ((buffer[0] != 0x52005100) || (buffer[1] != 0x5900)) {
|
|
status = kStatus_Fail;
|
|
return status;
|
|
}
|
|
// ASO Exit 0xF000
|
|
data[1] = 0xF0;
|
|
status = flexspi_nor_hyperbus_write(base, 0x0, (uint32_t *)data, 2);
|
|
if (status != kStatus_Success) {
|
|
return status;
|
|
}
|
|
|
|
return status;
|
|
}
|