610 lines
31 KiB
C
610 lines
31 KiB
C
/**
|
|
******************************************************************************
|
|
* @file stm32f4xx_hal_uart.h
|
|
* @author MCD Application Team
|
|
* @version V1.1.0
|
|
* @date 19-June-2014
|
|
* @brief Header file of UART HAL module.
|
|
******************************************************************************
|
|
* @attention
|
|
*
|
|
* <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without modification,
|
|
* are permitted provided that the following conditions are met:
|
|
* 1. Redistributions of source code must retain the above copyright notice,
|
|
* this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright notice,
|
|
* this list of conditions and the following disclaimer in the documentation
|
|
* and/or other materials provided with the distribution.
|
|
* 3. Neither the name of STMicroelectronics nor the names of its contributors
|
|
* may be used to endorse or promote products derived from this software
|
|
* without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
|
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
|
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
|
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
|
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
|
|
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
|
|
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
|
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
*
|
|
******************************************************************************
|
|
*/
|
|
|
|
/* Define to prevent recursive inclusion -------------------------------------*/
|
|
#ifndef __STM32F4xx_HAL_UART_H
|
|
#define __STM32F4xx_HAL_UART_H
|
|
|
|
#ifdef __cplusplus
|
|
extern "C" {
|
|
#endif
|
|
|
|
/* Includes ------------------------------------------------------------------*/
|
|
#include "stm32f4xx_hal_def.h"
|
|
|
|
/** @addtogroup STM32F4xx_HAL_Driver
|
|
* @{
|
|
*/
|
|
|
|
/** @addtogroup UART
|
|
* @{
|
|
*/
|
|
|
|
/* Exported types ------------------------------------------------------------*/
|
|
|
|
/**
|
|
* @brief UART Init Structure definition
|
|
*/
|
|
typedef struct
|
|
{
|
|
uint32_t BaudRate; /*!< This member configures the UART communication baud rate.
|
|
The baud rate is computed using the following formula:
|
|
- IntegerDivider = ((PCLKx) / (8 * (OVR8+1) * (huart->Init.BaudRate)))
|
|
- FractionalDivider = ((IntegerDivider - ((uint32_t) IntegerDivider)) * 8 * (OVR8+1)) + 0.5
|
|
Where OVR8 is the "oversampling by 8 mode" configuration bit in the CR1 register. */
|
|
|
|
uint32_t WordLength; /*!< Specifies the number of data bits transmitted or received in a frame.
|
|
This parameter can be a value of @ref UART_Word_Length */
|
|
|
|
uint32_t StopBits; /*!< Specifies the number of stop bits transmitted.
|
|
This parameter can be a value of @ref UART_Stop_Bits */
|
|
|
|
uint32_t Parity; /*!< Specifies the parity mode.
|
|
This parameter can be a value of @ref UART_Parity
|
|
@note When parity is enabled, the computed parity is inserted
|
|
at the MSB position of the transmitted data (9th bit when
|
|
the word length is set to 9 data bits; 8th bit when the
|
|
word length is set to 8 data bits). */
|
|
|
|
uint32_t Mode; /*!< Specifies wether the Receive or Transmit mode is enabled or disabled.
|
|
This parameter can be a value of @ref UART_Mode */
|
|
|
|
uint32_t HwFlowCtl; /*!< Specifies wether the hardware flow control mode is enabled
|
|
or disabled.
|
|
This parameter can be a value of @ref UART_Hardware_Flow_Control */
|
|
|
|
uint32_t OverSampling; /*!< Specifies wether the Over sampling 8 is enabled or disabled, to achieve higher speed (up to fPCLK/8).
|
|
This parameter can be a value of @ref UART_Over_Sampling */
|
|
}UART_InitTypeDef;
|
|
|
|
/**
|
|
* @brief HAL UART State structures definition
|
|
*/
|
|
typedef enum
|
|
{
|
|
HAL_UART_STATE_RESET = 0x00, /*!< Peripheral is not yet Initialized */
|
|
HAL_UART_STATE_READY = 0x01, /*!< Peripheral Initialized and ready for use */
|
|
HAL_UART_STATE_BUSY = 0x02, /*!< an internal process is ongoing */
|
|
HAL_UART_STATE_BUSY_TX = 0x12, /*!< Data Transmission process is ongoing */
|
|
HAL_UART_STATE_BUSY_RX = 0x22, /*!< Data Reception process is ongoing */
|
|
HAL_UART_STATE_BUSY_TX_RX = 0x32, /*!< Data Transmission and Reception process is ongoing */
|
|
HAL_UART_STATE_TIMEOUT = 0x03, /*!< Timeout state */
|
|
HAL_UART_STATE_ERROR = 0x04 /*!< Error */
|
|
}HAL_UART_StateTypeDef;
|
|
|
|
/**
|
|
* @brief HAL UART Error Code structure definition
|
|
*/
|
|
typedef enum
|
|
{
|
|
HAL_UART_ERROR_NONE = 0x00, /*!< No error */
|
|
HAL_UART_ERROR_PE = 0x01, /*!< Parity error */
|
|
HAL_UART_ERROR_NE = 0x02, /*!< Noise error */
|
|
HAL_UART_ERROR_FE = 0x04, /*!< frame error */
|
|
HAL_UART_ERROR_ORE = 0x08, /*!< Overrun error */
|
|
HAL_UART_ERROR_DMA = 0x10 /*!< DMA transfer error */
|
|
}HAL_UART_ErrorTypeDef;
|
|
|
|
/**
|
|
* @brief UART handle Structure definition
|
|
*/
|
|
typedef struct
|
|
{
|
|
USART_TypeDef *Instance; /* UART registers base address */
|
|
|
|
UART_InitTypeDef Init; /* UART communication parameters */
|
|
|
|
uint8_t *pTxBuffPtr; /* Pointer to UART Tx transfer Buffer */
|
|
|
|
uint16_t TxXferSize; /* UART Tx Transfer size */
|
|
|
|
uint16_t TxXferCount; /* UART Tx Transfer Counter */
|
|
|
|
uint8_t *pRxBuffPtr; /* Pointer to UART Rx transfer Buffer */
|
|
|
|
uint16_t RxXferSize; /* UART Rx Transfer size */
|
|
|
|
uint16_t RxXferCount; /* UART Rx Transfer Counter */
|
|
|
|
DMA_HandleTypeDef *hdmatx; /* UART Tx DMA Handle parameters */
|
|
|
|
DMA_HandleTypeDef *hdmarx; /* UART Rx DMA Handle parameters */
|
|
|
|
HAL_LockTypeDef Lock; /* Locking object */
|
|
|
|
__IO HAL_UART_StateTypeDef State; /* UART communication state */
|
|
|
|
__IO HAL_UART_ErrorTypeDef ErrorCode; /* UART Error code */
|
|
|
|
}UART_HandleTypeDef;
|
|
|
|
/* Exported constants --------------------------------------------------------*/
|
|
/** @defgroup UART_Exported_Constants
|
|
* @{
|
|
*/
|
|
|
|
/** @defgroup UART_Word_Length
|
|
* @{
|
|
*/
|
|
#define UART_WORDLENGTH_8B ((uint32_t)0x00000000)
|
|
#define UART_WORDLENGTH_9B ((uint32_t)USART_CR1_M)
|
|
#define IS_UART_WORD_LENGTH(LENGTH) (((LENGTH) == UART_WORDLENGTH_8B) || \
|
|
((LENGTH) == UART_WORDLENGTH_9B))
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup UART_Stop_Bits
|
|
* @{
|
|
*/
|
|
#define UART_STOPBITS_1 ((uint32_t)0x00000000)
|
|
#define UART_STOPBITS_2 ((uint32_t)USART_CR2_STOP_1)
|
|
#define IS_UART_STOPBITS(STOPBITS) (((STOPBITS) == UART_STOPBITS_1) || \
|
|
((STOPBITS) == UART_STOPBITS_2))
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup UART_Parity
|
|
* @{
|
|
*/
|
|
#define UART_PARITY_NONE ((uint32_t)0x00000000)
|
|
#define UART_PARITY_EVEN ((uint32_t)USART_CR1_PCE)
|
|
#define UART_PARITY_ODD ((uint32_t)(USART_CR1_PCE | USART_CR1_PS))
|
|
#define IS_UART_PARITY(PARITY) (((PARITY) == UART_PARITY_NONE) || \
|
|
((PARITY) == UART_PARITY_EVEN) || \
|
|
((PARITY) == UART_PARITY_ODD))
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup UART_Hardware_Flow_Control
|
|
* @{
|
|
*/
|
|
#define UART_HWCONTROL_NONE ((uint32_t)0x00000000)
|
|
#define UART_HWCONTROL_RTS ((uint32_t)USART_CR3_RTSE)
|
|
#define UART_HWCONTROL_CTS ((uint32_t)USART_CR3_CTSE)
|
|
#define UART_HWCONTROL_RTS_CTS ((uint32_t)(USART_CR3_RTSE | USART_CR3_CTSE))
|
|
#define IS_UART_HARDWARE_FLOW_CONTROL(CONTROL)\
|
|
(((CONTROL) == UART_HWCONTROL_NONE) || \
|
|
((CONTROL) == UART_HWCONTROL_RTS) || \
|
|
((CONTROL) == UART_HWCONTROL_CTS) || \
|
|
((CONTROL) == UART_HWCONTROL_RTS_CTS))
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup UART_Mode
|
|
* @{
|
|
*/
|
|
#define UART_MODE_RX ((uint32_t)USART_CR1_RE)
|
|
#define UART_MODE_TX ((uint32_t)USART_CR1_TE)
|
|
#define UART_MODE_TX_RX ((uint32_t)(USART_CR1_TE |USART_CR1_RE))
|
|
#define IS_UART_MODE(MODE) ((((MODE) & (uint32_t)0x0000FFF3) == 0x00) && ((MODE) != (uint32_t)0x000000))
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup UART_State
|
|
* @{
|
|
*/
|
|
#define UART_STATE_DISABLE ((uint32_t)0x00000000)
|
|
#define UART_STATE_ENABLE ((uint32_t)USART_CR1_UE)
|
|
#define IS_UART_STATE(STATE) (((STATE) == UART_STATE_DISABLE) || \
|
|
((STATE) == UART_STATE_ENABLE))
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup UART_Over_Sampling
|
|
* @{
|
|
*/
|
|
#define UART_OVERSAMPLING_16 ((uint32_t)0x00000000)
|
|
#define UART_OVERSAMPLING_8 ((uint32_t)USART_CR1_OVER8)
|
|
#define IS_UART_OVERSAMPLING(SAMPLING) (((SAMPLING) == UART_OVERSAMPLING_16) || \
|
|
((SAMPLING) == UART_OVERSAMPLING_8))
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup UART_LIN_Break_Detection_Length
|
|
* @{
|
|
*/
|
|
#define UART_LINBREAKDETECTLENGTH_10B ((uint32_t)0x00000000)
|
|
#define UART_LINBREAKDETECTLENGTH_11B ((uint32_t)0x00000020)
|
|
#define IS_UART_LIN_BREAK_DETECT_LENGTH(LENGTH) (((LENGTH) == UART_LINBREAKDETECTLENGTH_10B) || \
|
|
((LENGTH) == UART_LINBREAKDETECTLENGTH_11B))
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup UART_WakeUp_functions
|
|
* @{
|
|
*/
|
|
#define UART_WAKEUPMETHODE_IDLELINE ((uint32_t)0x00000000)
|
|
#define UART_WAKEUPMETHODE_ADDRESSMARK ((uint32_t)0x00000800)
|
|
#define IS_UART_WAKEUPMETHODE(WAKEUP) (((WAKEUP) == UART_WAKEUPMETHODE_IDLELINE) || \
|
|
((WAKEUP) == UART_WAKEUPMETHODE_ADDRESSMARK))
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup UART_Flags
|
|
* Elements values convention: 0xXXXX
|
|
* - 0xXXXX : Flag mask in the SR register
|
|
* @{
|
|
*/
|
|
#define UART_FLAG_CTS ((uint32_t)0x00000200)
|
|
#define UART_FLAG_LBD ((uint32_t)0x00000100)
|
|
#define UART_FLAG_TXE ((uint32_t)0x00000080)
|
|
#define UART_FLAG_TC ((uint32_t)0x00000040)
|
|
#define UART_FLAG_RXNE ((uint32_t)0x00000020)
|
|
#define UART_FLAG_IDLE ((uint32_t)0x00000010)
|
|
#define UART_FLAG_ORE ((uint32_t)0x00000008)
|
|
#define UART_FLAG_NE ((uint32_t)0x00000004)
|
|
#define UART_FLAG_FE ((uint32_t)0x00000002)
|
|
#define UART_FLAG_PE ((uint32_t)0x00000001)
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup UART_Interrupt_definition
|
|
* Elements values convention: 0xY000XXXX
|
|
* - XXXX : Interrupt mask in the XX register
|
|
* - Y : Interrupt source register (2bits)
|
|
* - 01: CR1 register
|
|
* - 10: CR2 register
|
|
* - 11: CR3 register
|
|
*
|
|
* @{
|
|
*/
|
|
#define UART_IT_PE ((uint32_t)0x10000100)
|
|
#define UART_IT_TXE ((uint32_t)0x10000080)
|
|
#define UART_IT_TC ((uint32_t)0x10000040)
|
|
#define UART_IT_RXNE ((uint32_t)0x10000020)
|
|
#define UART_IT_IDLE ((uint32_t)0x10000010)
|
|
|
|
#define UART_IT_LBD ((uint32_t)0x20000040)
|
|
#define UART_IT_CTS ((uint32_t)0x30000400)
|
|
|
|
#define UART_IT_ERR ((uint32_t)0x30000001)
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/* Exported macro ------------------------------------------------------------*/
|
|
|
|
/** @brief Reset UART handle state
|
|
* @param __HANDLE__: specifies the UART Handle.
|
|
* This parameter can be UARTx where x: 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or
|
|
* UART peripheral.
|
|
* @retval None
|
|
*/
|
|
#define __HAL_UART_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_UART_STATE_RESET)
|
|
|
|
/** @brief Flushs the UART DR register
|
|
* @param __HANDLE__: specifies the UART Handle.
|
|
*/
|
|
#define __HAL_UART_FLUSH_DRREGISTER(__HANDLE__) ((__HANDLE__)->Instance->DR)
|
|
|
|
/** @brief Checks whether the specified UART flag is set or not.
|
|
* @param __HANDLE__: specifies the UART Handle.
|
|
* This parameter can be UARTx where x: 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or
|
|
* UART peripheral.
|
|
* @param __FLAG__: specifies the flag to check.
|
|
* This parameter can be one of the following values:
|
|
* @arg UART_FLAG_CTS: CTS Change flag (not available for UART4 and UART5)
|
|
* @arg UART_FLAG_LBD: LIN Break detection flag
|
|
* @arg UART_FLAG_TXE: Transmit data register empty flag
|
|
* @arg UART_FLAG_TC: Transmission Complete flag
|
|
* @arg UART_FLAG_RXNE: Receive data register not empty flag
|
|
* @arg UART_FLAG_IDLE: Idle Line detection flag
|
|
* @arg UART_FLAG_ORE: OverRun Error flag
|
|
* @arg UART_FLAG_NE: Noise Error flag
|
|
* @arg UART_FLAG_FE: Framing Error flag
|
|
* @arg UART_FLAG_PE: Parity Error flag
|
|
* @retval The new state of __FLAG__ (TRUE or FALSE).
|
|
*/
|
|
|
|
#define __HAL_UART_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->SR & (__FLAG__)) == (__FLAG__))
|
|
|
|
/** @brief Clears the specified UART pending flag.
|
|
* @param __HANDLE__: specifies the UART Handle.
|
|
* This parameter can be UARTx where x: 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or
|
|
* UART peripheral.
|
|
* @param __FLAG__: specifies the flag to check.
|
|
* This parameter can be any combination of the following values:
|
|
* @arg UART_FLAG_CTS: CTS Change flag (not available for UART4 and UART5).
|
|
* @arg UART_FLAG_LBD: LIN Break detection flag.
|
|
* @arg UART_FLAG_TC: Transmission Complete flag.
|
|
* @arg UART_FLAG_RXNE: Receive data register not empty flag.
|
|
*
|
|
* @note PE (Parity error), FE (Framing error), NE (Noise error), ORE (OverRun
|
|
* error) and IDLE (Idle line detected) flags are cleared by software
|
|
* sequence: a read operation to USART_SR register followed by a read
|
|
* operation to USART_DR register.
|
|
* @note RXNE flag can be also cleared by a read to the USART_DR register.
|
|
* @note TC flag can be also cleared by software sequence: a read operation to
|
|
* USART_SR register followed by a write operation to USART_DR register.
|
|
* @note TXE flag is cleared only by a write to the USART_DR register.
|
|
*
|
|
* @retval None
|
|
*/
|
|
#define __HAL_UART_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->SR = ~(__FLAG__))
|
|
|
|
/** @brief Clear the UART PE pending flag.
|
|
* @param __HANDLE__: specifies the UART Handle.
|
|
* This parameter can be UARTx where x: 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or
|
|
* UART peripheral.
|
|
* @retval None
|
|
*/
|
|
#define __HAL_UART_CLEAR_PEFLAG(__HANDLE__) do{(__HANDLE__)->Instance->SR;\
|
|
(__HANDLE__)->Instance->DR;}while(0)
|
|
/** @brief Clear the UART FE pending flag.
|
|
* @param __HANDLE__: specifies the UART Handle.
|
|
* This parameter can be UARTx where x: 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or
|
|
* UART peripheral.
|
|
* @retval None
|
|
*/
|
|
#define __HAL_UART_CLEAR_FEFLAG(__HANDLE__) __HAL_UART_CLEAR_PEFLAG(__HANDLE__)
|
|
|
|
/** @brief Clear the UART NE pending flag.
|
|
* @param __HANDLE__: specifies the UART Handle.
|
|
* This parameter can be UARTx where x: 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or
|
|
* UART peripheral.
|
|
* @retval None
|
|
*/
|
|
#define __HAL_UART_CLEAR_NEFLAG(__HANDLE__) __HAL_UART_CLEAR_PEFLAG(__HANDLE__)
|
|
|
|
/** @brief Clear the UART ORE pending flag.
|
|
* @param __HANDLE__: specifies the UART Handle.
|
|
* This parameter can be UARTx where x: 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or
|
|
* UART peripheral.
|
|
* @retval None
|
|
*/
|
|
#define __HAL_UART_CLEAR_OREFLAG(__HANDLE__) __HAL_UART_CLEAR_PEFLAG(__HANDLE__)
|
|
|
|
/** @brief Clear the UART IDLE pending flag.
|
|
* @param __HANDLE__: specifies the UART Handle.
|
|
* This parameter can be UARTx where x: 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or
|
|
* UART peripheral.
|
|
* @retval None
|
|
*/
|
|
#define __HAL_UART_CLEAR_IDLEFLAG(__HANDLE__) __HAL_UART_CLEAR_PEFLAG(__HANDLE__)
|
|
|
|
/** @brief Enables or disables the specified UART interrupt.
|
|
* @param __HANDLE__: specifies the UART Handle.
|
|
* This parameter can be UARTx where x: 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or
|
|
* UART peripheral.
|
|
* @param __INTERRUPT__: specifies the UART interrupt source to check.
|
|
* This parameter can be one of the following values:
|
|
* @arg UART_IT_CTS: CTS change interrupt
|
|
* @arg UART_IT_LBD: LIN Break detection interrupt
|
|
* @arg UART_IT_TXE: Transmit Data Register empty interrupt
|
|
* @arg UART_IT_TC: Transmission complete interrupt
|
|
* @arg UART_IT_RXNE: Receive Data register not empty interrupt
|
|
* @arg UART_IT_IDLE: Idle line detection interrupt
|
|
* @arg UART_IT_PE: Parity Error interrupt
|
|
* @arg UART_IT_ERR: Error interrupt(Frame error, noise error, overrun error)
|
|
* @param NewState: new state of the specified UART interrupt.
|
|
* This parameter can be: ENABLE or DISABLE.
|
|
* @retval None
|
|
*/
|
|
#define UART_IT_MASK ((uint32_t)0x0000FFFF)
|
|
#define __HAL_UART_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((((__INTERRUPT__) >> 28) == 1)? ((__HANDLE__)->Instance->CR1 |= ((__INTERRUPT__) & UART_IT_MASK)): \
|
|
(((__INTERRUPT__) >> 28) == 2)? ((__HANDLE__)->Instance->CR2 |= ((__INTERRUPT__) & UART_IT_MASK)): \
|
|
((__HANDLE__)->Instance->CR3 |= ((__INTERRUPT__) & UART_IT_MASK)))
|
|
#define __HAL_UART_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((((__INTERRUPT__) >> 28) == 1)? ((__HANDLE__)->Instance->CR1 &= ~((__INTERRUPT__) & UART_IT_MASK)): \
|
|
(((__INTERRUPT__) >> 28) == 2)? ((__HANDLE__)->Instance->CR2 &= ~((__INTERRUPT__) & UART_IT_MASK)): \
|
|
((__HANDLE__)->Instance->CR3 &= ~ ((__INTERRUPT__) & UART_IT_MASK)))
|
|
|
|
/** @brief Checks whether the specified UART interrupt has occurred or not.
|
|
* @param __HANDLE__: specifies the UART Handle.
|
|
* This parameter can be UARTx where x: 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or
|
|
* UART peripheral.
|
|
* @param __IT__: specifies the UART interrupt source to check.
|
|
* This parameter can be one of the following values:
|
|
* @arg UART_IT_CTS: CTS change interrupt (not available for UART4 and UART5)
|
|
* @arg UART_IT_LBD: LIN Break detection interrupt
|
|
* @arg UART_IT_TXE: Transmit Data Register empty interrupt
|
|
* @arg UART_IT_TC: Transmission complete interrupt
|
|
* @arg UART_IT_RXNE: Receive Data register not empty interrupt
|
|
* @arg UART_IT_IDLE: Idle line detection interrupt
|
|
* @arg USART_IT_ERR: Error interrupt
|
|
* @retval The new state of __IT__ (TRUE or FALSE).
|
|
*/
|
|
#define __HAL_UART_GET_IT_SOURCE(__HANDLE__, __IT__) (((((__IT__) >> 28) == 1)? (__HANDLE__)->Instance->CR1:(((((uint32_t)(__IT__)) >> 28) == 2)? \
|
|
(__HANDLE__)->Instance->CR2 : (__HANDLE__)->Instance->CR3)) & (((uint32_t)(__IT__)) & UART_IT_MASK))
|
|
|
|
/** @brief Enable CTS flow control
|
|
* This macro allows to enable CTS hardware flow control for a given UART instance,
|
|
* without need to call HAL_UART_Init() function.
|
|
* As involving direct access to UART registers, usage of this macro should be fully endorsed by user.
|
|
* @note As macro is expected to be used for modifying CTS Hw flow control feature activation, without need
|
|
* for USART instance Deinit/Init, following conditions for macro call should be fulfilled :
|
|
* - UART instance should have already been initialised (through call of HAL_UART_Init() )
|
|
* - macro could only be called when corresponding UART instance is disabled (i.e __HAL_UART_DISABLE(__HANDLE__))
|
|
* and should be followed by an Enable macro (i.e __HAL_UART_ENABLE(__HANDLE__)).
|
|
* @param __HANDLE__: specifies the UART Handle.
|
|
* The Handle Instance can be USART1, USART2 or LPUART.
|
|
* @retval None
|
|
*/
|
|
#define __HAL_UART_HWCONTROL_CTS_ENABLE(__HANDLE__) \
|
|
do{ \
|
|
SET_BIT((__HANDLE__)->Instance->CR3, USART_CR3_CTSE); \
|
|
(__HANDLE__)->Init.HwFlowCtl |= USART_CR3_CTSE; \
|
|
} while(0)
|
|
|
|
/** @brief Disable CTS flow control
|
|
* This macro allows to disable CTS hardware flow control for a given UART instance,
|
|
* without need to call HAL_UART_Init() function.
|
|
* As involving direct access to UART registers, usage of this macro should be fully endorsed by user.
|
|
* @note As macro is expected to be used for modifying CTS Hw flow control feature activation, without need
|
|
* for USART instance Deinit/Init, following conditions for macro call should be fulfilled :
|
|
* - UART instance should have already been initialised (through call of HAL_UART_Init() )
|
|
* - macro could only be called when corresponding UART instance is disabled (i.e __HAL_UART_DISABLE(__HANDLE__))
|
|
* and should be followed by an Enable macro (i.e __HAL_UART_ENABLE(__HANDLE__)).
|
|
* @param __HANDLE__: specifies the UART Handle.
|
|
* The Handle Instance can be USART1, USART2 or LPUART.
|
|
* @retval None
|
|
*/
|
|
#define __HAL_UART_HWCONTROL_CTS_DISABLE(__HANDLE__) \
|
|
do{ \
|
|
CLEAR_BIT((__HANDLE__)->Instance->CR3, USART_CR3_CTSE); \
|
|
(__HANDLE__)->Init.HwFlowCtl &= ~(USART_CR3_CTSE); \
|
|
} while(0)
|
|
|
|
/** @brief Enable RTS flow control
|
|
* This macro allows to enable RTS hardware flow control for a given UART instance,
|
|
* without need to call HAL_UART_Init() function.
|
|
* As involving direct access to UART registers, usage of this macro should be fully endorsed by user.
|
|
* @note As macro is expected to be used for modifying RTS Hw flow control feature activation, without need
|
|
* for USART instance Deinit/Init, following conditions for macro call should be fulfilled :
|
|
* - UART instance should have already been initialised (through call of HAL_UART_Init() )
|
|
* - macro could only be called when corresponding UART instance is disabled (i.e __HAL_UART_DISABLE(__HANDLE__))
|
|
* and should be followed by an Enable macro (i.e __HAL_UART_ENABLE(__HANDLE__)).
|
|
* @param __HANDLE__: specifies the UART Handle.
|
|
* The Handle Instance can be USART1, USART2 or LPUART.
|
|
* @retval None
|
|
*/
|
|
#define __HAL_UART_HWCONTROL_RTS_ENABLE(__HANDLE__) \
|
|
do{ \
|
|
SET_BIT((__HANDLE__)->Instance->CR3, USART_CR3_RTSE); \
|
|
(__HANDLE__)->Init.HwFlowCtl |= USART_CR3_RTSE; \
|
|
} while(0)
|
|
|
|
/** @brief Disable RTS flow control
|
|
* This macro allows to disable RTS hardware flow control for a given UART instance,
|
|
* without need to call HAL_UART_Init() function.
|
|
* As involving direct access to UART registers, usage of this macro should be fully endorsed by user.
|
|
* @note As macro is expected to be used for modifying RTS Hw flow control feature activation, without need
|
|
* for USART instance Deinit/Init, following conditions for macro call should be fulfilled :
|
|
* - UART instance should have already been initialised (through call of HAL_UART_Init() )
|
|
* - macro could only be called when corresponding UART instance is disabled (i.e __HAL_UART_DISABLE(__HANDLE__))
|
|
* and should be followed by an Enable macro (i.e __HAL_UART_ENABLE(__HANDLE__)).
|
|
* @param __HANDLE__: specifies the UART Handle.
|
|
* The Handle Instance can be USART1, USART2 or LPUART.
|
|
* @retval None
|
|
*/
|
|
#define __HAL_UART_HWCONTROL_RTS_DISABLE(__HANDLE__) \
|
|
do{ \
|
|
CLEAR_BIT((__HANDLE__)->Instance->CR3, USART_CR3_RTSE);\
|
|
(__HANDLE__)->Init.HwFlowCtl &= ~(USART_CR3_RTSE); \
|
|
} while(0)
|
|
|
|
/** @brief macros to enables or disables the UART's one bit sampling method
|
|
* @param __HANDLE__: specifies the UART Handle.
|
|
* @retval None
|
|
*/
|
|
#define __HAL_UART_ONEBIT_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR3|= USART_CR3_ONEBIT)
|
|
#define __HAL_UART_ONEBIT_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR3 &= (uint16_t)~((uint16_t)USART_CR3_ONEBIT))
|
|
|
|
#define __HAL_UART_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 |= USART_CR1_UE)
|
|
#define __HAL_UART_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 &= ~USART_CR1_UE)
|
|
|
|
#define __DIV_SAMPLING16(_PCLK_, _BAUD_) (((_PCLK_)*25)/(4*(_BAUD_)))
|
|
#define __DIVMANT_SAMPLING16(_PCLK_, _BAUD_) (__DIV_SAMPLING16((_PCLK_), (_BAUD_))/100)
|
|
#define __DIVFRAQ_SAMPLING16(_PCLK_, _BAUD_) (((__DIV_SAMPLING16((_PCLK_), (_BAUD_)) - (__DIVMANT_SAMPLING16((_PCLK_), (_BAUD_)) * 100)) * 16 + 50) / 100)
|
|
#define __UART_BRR_SAMPLING16(_PCLK_, _BAUD_) ((__DIVMANT_SAMPLING16((_PCLK_), (_BAUD_)) << 4)|(__DIVFRAQ_SAMPLING16((_PCLK_), (_BAUD_)) & 0x0F))
|
|
|
|
#define __DIV_SAMPLING8(_PCLK_, _BAUD_) (((_PCLK_)*25)/(2*(_BAUD_)))
|
|
#define __DIVMANT_SAMPLING8(_PCLK_, _BAUD_) (__DIV_SAMPLING8((_PCLK_), (_BAUD_))/100)
|
|
#define __DIVFRAQ_SAMPLING8(_PCLK_, _BAUD_) (((__DIV_SAMPLING8((_PCLK_), (_BAUD_)) - (__DIVMANT_SAMPLING8((_PCLK_), (_BAUD_)) * 100)) * 16 + 50) / 100)
|
|
#define __UART_BRR_SAMPLING8(_PCLK_, _BAUD_) ((__DIVMANT_SAMPLING8((_PCLK_), (_BAUD_)) << 4)|(__DIVFRAQ_SAMPLING8((_PCLK_), (_BAUD_)) & 0x0F))
|
|
|
|
#define IS_UART_BAUDRATE(BAUDRATE) ((BAUDRATE) < 10500001)
|
|
#define IS_UART_ADDRESS(ADDRESS) ((ADDRESS) <= 0xF)
|
|
|
|
/* Exported functions --------------------------------------------------------*/
|
|
/* Initialization/de-initialization functions **********************************/
|
|
HAL_StatusTypeDef HAL_UART_Init(UART_HandleTypeDef *huart);
|
|
HAL_StatusTypeDef HAL_HalfDuplex_Init(UART_HandleTypeDef *huart);
|
|
HAL_StatusTypeDef HAL_LIN_Init(UART_HandleTypeDef *huart, uint32_t BreakDetectLength);
|
|
HAL_StatusTypeDef HAL_MultiProcessor_Init(UART_HandleTypeDef *huart, uint8_t Address, uint32_t WakeUpMethode);
|
|
HAL_StatusTypeDef HAL_UART_DeInit (UART_HandleTypeDef *huart);
|
|
void HAL_UART_MspInit(UART_HandleTypeDef *huart);
|
|
void HAL_UART_MspDeInit(UART_HandleTypeDef *huart);
|
|
|
|
/* IO operation functions *******************************************************/
|
|
HAL_StatusTypeDef HAL_UART_Transmit(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size, uint32_t Timeout);
|
|
HAL_StatusTypeDef HAL_UART_Receive(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size, uint32_t Timeout);
|
|
HAL_StatusTypeDef HAL_UART_Transmit_IT(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size);
|
|
HAL_StatusTypeDef HAL_UART_Receive_IT(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size);
|
|
HAL_StatusTypeDef HAL_UART_Transmit_DMA(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size);
|
|
HAL_StatusTypeDef HAL_UART_Receive_DMA(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size);
|
|
HAL_StatusTypeDef HAL_UART_DMAPause(UART_HandleTypeDef *huart);
|
|
HAL_StatusTypeDef HAL_UART_DMAResume(UART_HandleTypeDef *huart);
|
|
HAL_StatusTypeDef HAL_UART_DMAStop(UART_HandleTypeDef *huart);
|
|
void HAL_UART_IRQHandler(UART_HandleTypeDef *huart);
|
|
void HAL_UART_TxCpltCallback(UART_HandleTypeDef *huart);
|
|
void HAL_UART_TxHalfCpltCallback(UART_HandleTypeDef *huart);
|
|
void HAL_UART_RxCpltCallback(UART_HandleTypeDef *huart);
|
|
void HAL_UART_RxHalfCpltCallback(UART_HandleTypeDef *huart);
|
|
void HAL_UART_ErrorCallback(UART_HandleTypeDef *huart);
|
|
|
|
/* Peripheral Control functions ************************************************/
|
|
HAL_StatusTypeDef HAL_LIN_SendBreak(UART_HandleTypeDef *huart);
|
|
HAL_StatusTypeDef HAL_MultiProcessor_EnterMuteMode(UART_HandleTypeDef *huart);
|
|
HAL_StatusTypeDef HAL_MultiProcessor_ExitMuteMode(UART_HandleTypeDef *huart);
|
|
HAL_StatusTypeDef HAL_HalfDuplex_EnableTransmitter(UART_HandleTypeDef *huart);
|
|
HAL_StatusTypeDef HAL_HalfDuplex_EnableReceiver(UART_HandleTypeDef *huart);
|
|
|
|
/* Peripheral State functions **************************************************/
|
|
HAL_UART_StateTypeDef HAL_UART_GetState(UART_HandleTypeDef *huart);
|
|
uint32_t HAL_UART_GetError(UART_HandleTypeDef *huart);
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
#ifdef __cplusplus
|
|
}
|
|
#endif
|
|
|
|
#endif /* __STM32F4xx_HAL_UART_H */
|
|
|
|
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|