800d5cd16f
|
||
|---|---|---|
| .. | ||
| scripts | ||
| Makefile | ||
| README.md | ||
| eagle.rom.addr.v6.ld | ||
| esp8266.ld | ||
| esp_mphal.c | ||
| esp_mphal.h | ||
| etshal.h | ||
| gccollect.c | ||
| gccollect.h | ||
| gchelper.s | ||
| main.c | ||
| makeimg.py | ||
| modesp.c | ||
| modpyb.c | ||
| modpyb.h | ||
| modpybpin.c | ||
| mpconfigport.h | ||
| qstrdefsport.h | ||
| strtoll.c | ||
| uart.c | ||
| uart.h | ||
| uart_register.h | ||
| user_config.h | ||
| utils.c | ||
| utils.h | ||
README.md
Micro Python port to ESP8266
This is a port of Micro Python to the Espressif ESP8266 wifi module.
Currently implemented features include:
- REPL (Python prompt) over UART0.
- 24k heap RAM available for Python code.
- Garbage collector, exceptions.
- Unicode support.
- Builtin modules: gc, array, collections, io, struct, sys.
- C long-long type used as bignum implementation (gives 64 signed ints).
Note that floating-point numbers are not supported.
On the TODO list:
- Wifi support.
- GPIO support.
- Internal filesystem using the flash.
- ...
Build instructions
The tool chain required for the build is the OpenSource ESP SDK, which can be
found at https://github.com/pfalcon/esp-open-sdk. Clone this repository and
run make in its directory to build and install the SDK locally.
Then, to build Micro Python for the ESP8266, just run:
$ make
This should produce binary images in the build/ subdirectory. To flash them
to your ESP8266, use:
$ make deploy
This will use the esptool.py script to download the images. You must have
your ESP module in the bootloader, and connected to a serial port on your PC.
The default serial port is /dev/ttyACM0. To specify another, use, eg:
$ make PORT=/dev/ttyUSB0 deploy
The images that are built are:
firmware.elf-0x00000.bin: to be flashed at 0x00000firmware.elf-0x10000.bin: to be flashed at 0x10000
There is also a combined image, made up of the above 2 binary files with the appropriate padding:
firmware-combined.bin: to be flashed at 0x00000