mirrors
/
micropython
mirror of https://github.com/micropython/micropython.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
micropython/minimal
History
Delio Brignoli e2ac8bb3f1 py: Add MICROPY_USE_INTERNAL_PRINTF option, defaults to enabled. 
This new config option allows to control whether MicroPython uses its own
internal printf or not (if not, an external one should be linked in).
Accompanying this new option is the inclusion of lib/utils/printf.c in the
core list of source files, so that ports no longer need to include it
themselves.
 		2016-09-05 12:18:53 +10:00
..
Makefile py: Add MICROPY_USE_INTERNAL_PRINTF option, defaults to enabled. 2016-09-05 12:18:53 +10:00
README.md minimal: Add enough code to run minimal build on STM32F4xx hardware. 2016-01-07 17:43:07 +00:00
frozentest.mpy minimal: Add example of frozen persistent bytecode (.mpy file). 2016-04-13 16:07:47 +01:00
frozentest.py minimal: Add example of frozen persistent bytecode (.mpy file). 2016-04-13 16:07:47 +01:00
main.c minimal: Add enough code to run minimal build on STM32F4xx hardware. 2016-01-07 17:43:07 +00:00
mpconfigport.h ports: Remove typedef of machine_ptr_t, it's no longer needed. 2016-08-15 11:02:59 +10:00
mphalport.h all: Add py/mphal.h and use it in all ports. 2015-10-31 19:14:30 +03:00
qstrdefsport.h minimal: New port, intended to represent minimal working code. 2015-01-13 03:17:47 +02:00
stm32f405.ld minimal: Add enough code to run minimal build on STM32F4xx hardware. 2016-01-07 17:43:07 +00:00
uart_core.c minimal: Add enough code to run minimal build on STM32F4xx hardware. 2016-01-07 17:43:07 +00:00

README.md

The minimal port

This port is intended to be a minimal MicroPython port that actually runs. It can run under Linux (or similar) and on any STM32F4xx MCU (eg the pyboard).

Building and running Linux version

By default the port will be built for the host machine:

$ make

To run a small test script do:

$ make run

Building for an STM32 MCU

The Makefile has the ability to build for a Cortex-M CPU, and by default includes some start-up code for an STM32F4xx MCU and also enables a UART for communication. To build:

$ make CROSS=1

If you previously built the Linux version, you will need to first run make clean to get rid of incompatible object files.

Building will produce the build/firmware.dfu file which can be programmed to an MCU using:

$ make CROSS=1 deploy

This version of the build will work out-of-the-box on a pyboard (and anything similar), and will give you a MicroPython REPL on UART1 at 9600 baud. Pin PA13 will also be driven high, and this turns on the red LED on the pyboard.