mirrors
/
micropython
mirror of https://github.com/micropython/micropython.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
micropython/ports/cc3200/hal/inc/hw_apps_rcm.h

1507 lines
69 KiB
C
Raw Blame History

//*****************************************************************************
//
// Copyright (C) 2014 Texas Instruments Incorporated - http://www.ti.com/
//
//
// Redistribution and use in source and binary forms, with or without
// modification, are permitted provided that the following conditions
// are met:
//
// Redistributions of source code must retain the above copyright
// notice, this list of conditions and the following disclaimer.
//
// Redistributions in binary form must reproduce the above copyright
// notice, this list of conditions and the following disclaimer in the
// documentation and/or other materials provided with the
// distribution.
//
// Neither the name of Texas Instruments Incorporated nor the names of
// its contributors may be used to endorse or promote products derived
// from this software without specific prior written permission.
//
// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
// "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
// LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
// A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
// OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
// LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
// DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
// THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
// (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
// OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
//
//*****************************************************************************
#ifndef __HW_APPS_RCM_H__
#define __HW_APPS_RCM_H__
//*****************************************************************************
//
// The following are defines for the APPS_RCM register offsets.
//
//*****************************************************************************
#define APPS_RCM_O_CAMERA_CLK_GEN \
0x00000000
#define APPS_RCM_O_CAMERA_CLK_GATING \
0x00000004
#define APPS_RCM_O_CAMERA_SOFT_RESET \
0x00000008
#define APPS_RCM_O_MCASP_CLK_GATING \
0x00000014
#define APPS_RCM_O_MCASP_SOFT_RESET \
0x00000018
#define APPS_RCM_O_MMCHS_CLK_GEN \
0x00000020
#define APPS_RCM_O_MMCHS_CLK_GATING \
0x00000024
#define APPS_RCM_O_MMCHS_SOFT_RESET \
0x00000028
#define APPS_RCM_O_MCSPI_A1_CLK_GEN \
0x0000002C
#define APPS_RCM_O_MCSPI_A1_CLK_GATING \
0x00000030
#define APPS_RCM_O_MCSPI_A1_SOFT_RESET \
0x00000034
#define APPS_RCM_O_MCSPI_A2_CLK_GEN \
0x00000038
#define APPS_RCM_O_MCSPI_A2_CLK_GATING \
0x00000040
#define APPS_RCM_O_MCSPI_A2_SOFT_RESET \
0x00000044
#define APPS_RCM_O_UDMA_A_CLK_GATING \
0x00000048
#define APPS_RCM_O_UDMA_A_SOFT_RESET \
0x0000004C
#define APPS_RCM_O_GPIO_A_CLK_GATING \
0x00000050
#define APPS_RCM_O_GPIO_A_SOFT_RESET \
0x00000054
#define APPS_RCM_O_GPIO_B_CLK_GATING \
0x00000058
#define APPS_RCM_O_GPIO_B_SOFT_RESET \
0x0000005C
#define APPS_RCM_O_GPIO_C_CLK_GATING \
0x00000060
#define APPS_RCM_O_GPIO_C_SOFT_RESET \
0x00000064
#define APPS_RCM_O_GPIO_D_CLK_GATING \
0x00000068
#define APPS_RCM_O_GPIO_D_SOFT_RESET \
0x0000006C
#define APPS_RCM_O_GPIO_E_CLK_GATING \
0x00000070
#define APPS_RCM_O_GPIO_E_SOFT_RESET \
0x00000074
#define APPS_RCM_O_WDOG_A_CLK_GATING \
0x00000078
#define APPS_RCM_O_WDOG_A_SOFT_RESET \
0x0000007C
#define APPS_RCM_O_UART_A0_CLK_GATING \
0x00000080
#define APPS_RCM_O_UART_A0_SOFT_RESET \
0x00000084
#define APPS_RCM_O_UART_A1_CLK_GATING \
0x00000088
#define APPS_RCM_O_UART_A1_SOFT_RESET \
0x0000008C
#define APPS_RCM_O_GPT_A0_CLK_GATING \
0x00000090
#define APPS_RCM_O_GPT_A0_SOFT_RESET \
0x00000094
#define APPS_RCM_O_GPT_A1_CLK_GATING \
0x00000098
#define APPS_RCM_O_GPT_A1_SOFT_RESET \
0x0000009C
#define APPS_RCM_O_GPT_A2_CLK_GATING \
0x000000A0
#define APPS_RCM_O_GPT_A2_SOFT_RESET \
0x000000A4
#define APPS_RCM_O_GPT_A3_CLK_GATING \
0x000000A8
#define APPS_RCM_O_GPT_A3_SOFT_RESET \
0x000000AC
#define APPS_RCM_O_MCASP_FRAC_CLK_CONFIG0 \
0x000000B0
#define APPS_RCM_O_MCASP_FRAC_CLK_CONFIG1 \
0x000000B4
#define APPS_RCM_O_CRYPTO_CLK_GATING \
0x000000B8
#define APPS_RCM_O_CRYPTO_SOFT_RESET \
0x000000BC
#define APPS_RCM_O_MCSPI_S0_CLK_GATING \
0x000000C8
#define APPS_RCM_O_MCSPI_S0_SOFT_RESET \
0x000000CC
#define APPS_RCM_O_MCSPI_S0_CLKDIV_CFG \
0x000000D0
#define APPS_RCM_O_I2C_CLK_GATING \
0x000000D8
#define APPS_RCM_O_I2C_SOFT_RESET \
0x000000DC
#define APPS_RCM_O_APPS_LPDS_REQ \
0x000000E4
#define APPS_RCM_O_APPS_TURBO_REQ \
0x000000EC
#define APPS_RCM_O_APPS_DSLP_WAKE_CONFIG \
0x00000108
#define APPS_RCM_O_APPS_DSLP_WAKE_TIMER_CFG \
0x0000010C
#define APPS_RCM_O_APPS_RCM_SLP_WAKE_ENABLE \
0x00000110
#define APPS_RCM_O_APPS_SLP_WAKETIMER_CFG \
0x00000114
#define APPS_RCM_O_APPS_TO_NWP_WAKE_REQUEST \
0x00000118
#define APPS_RCM_O_APPS_RCM_INTERRUPT_STATUS \
0x00000120
#define APPS_RCM_O_APPS_RCM_INTERRUPT_ENABLE \
0x00000124
//******************************************************************************
//
// The following are defines for the bit fields in the
// APPS_RCM_O_CAMERA_CLK_GEN register.
//
//******************************************************************************
#define APPS_RCM_CAMERA_CLK_GEN_CAMERA_PLLCKDIV_OFF_TIME_M \
0x00000700 // Configuration of OFF-TIME for
// dividing PLL clk (240 MHz) in
// generation of Camera func-clk :
// "000" - 1 "001" - 2 "010" - 3
// "011" - 4 "100" - 5 "101" - 6
// "110" - 7 "111" - 8
#define APPS_RCM_CAMERA_CLK_GEN_CAMERA_PLLCKDIV_OFF_TIME_S 8
#define APPS_RCM_CAMERA_CLK_GEN_NU1_M \
0x000000F8
#define APPS_RCM_CAMERA_CLK_GEN_NU1_S 3
#define APPS_RCM_CAMERA_CLK_GEN_CAMERA_PLLCKDIV_ON_TIME_M \
0x00000007 // Configuration of ON-TIME for
// dividing PLL clk (240 MHz) in
// generation of Camera func-clk :
// "000" - 1 "001" - 2 "010" - 3
// "011" - 4 "100" - 5 "101" - 6
// "110" - 7 "111" - 8
#define APPS_RCM_CAMERA_CLK_GEN_CAMERA_PLLCKDIV_ON_TIME_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the
// APPS_RCM_O_CAMERA_CLK_GATING register.
//
//******************************************************************************
#define APPS_RCM_CAMERA_CLK_GATING_NU1_M \
0x00FE0000
#define APPS_RCM_CAMERA_CLK_GATING_NU1_S 17
#define APPS_RCM_CAMERA_CLK_GATING_CAMERA_DSLP_CLK_ENABLE \
0x00010000 // 0 - Disable camera clk during
// deep-sleep mode
#define APPS_RCM_CAMERA_CLK_GATING_NU2_M \
0x0000FE00
#define APPS_RCM_CAMERA_CLK_GATING_NU2_S 9
#define APPS_RCM_CAMERA_CLK_GATING_CAMERA_SLP_CLK_ENABLE \
0x00000100 // 1- Enable camera clk during
// sleep mode ; 0- Disable camera
// clk during sleep mode
#define APPS_RCM_CAMERA_CLK_GATING_NU3_M \
0x000000FE
#define APPS_RCM_CAMERA_CLK_GATING_NU3_S 1
#define APPS_RCM_CAMERA_CLK_GATING_CAMERA_RUN_CLK_ENABLE \
0x00000001 // 1- Enable camera clk during run
// mode ; 0- Disable camera clk
// during run mode
//******************************************************************************
//
// The following are defines for the bit fields in the
// APPS_RCM_O_CAMERA_SOFT_RESET register.
//
//******************************************************************************
#define APPS_RCM_CAMERA_SOFT_RESET_CAMERA_ENABLED_STATUS \
0x00000002 // 1 - Camera clocks/resets are
// enabled ; 0 - Camera
// clocks/resets are disabled
#define APPS_RCM_CAMERA_SOFT_RESET_CAMERA_SOFT_RESET \
0x00000001 // 1 - Assert reset for Camera-core
// ; 0 - De-assert reset for
// Camera-core
//******************************************************************************
//
// The following are defines for the bit fields in the
// APPS_RCM_O_MCASP_CLK_GATING register.
//
//******************************************************************************
#define APPS_RCM_MCASP_CLK_GATING_NU1_M \
0x00FE0000
#define APPS_RCM_MCASP_CLK_GATING_NU1_S 17
#define APPS_RCM_MCASP_CLK_GATING_MCASP_DSLP_CLK_ENABLE \
0x00010000 // 0 - Disable MCASP clk during
// deep-sleep mode
#define APPS_RCM_MCASP_CLK_GATING_NU2_M \
0x0000FE00
#define APPS_RCM_MCASP_CLK_GATING_NU2_S 9
#define APPS_RCM_MCASP_CLK_GATING_MCASP_SLP_CLK_ENABLE \
0x00000100 // 1- Enable MCASP clk during sleep
// mode ; 0- Disable MCASP clk
// during sleep mode
#define APPS_RCM_MCASP_CLK_GATING_NU3_M \
0x000000FE
#define APPS_RCM_MCASP_CLK_GATING_NU3_S 1
#define APPS_RCM_MCASP_CLK_GATING_MCASP_RUN_CLK_ENABLE \
0x00000001 // 1- Enable MCASP clk during run
// mode ; 0- Disable MCASP clk
// during run mode
//******************************************************************************
//
// The following are defines for the bit fields in the
// APPS_RCM_O_MCASP_SOFT_RESET register.
//
//******************************************************************************
#define APPS_RCM_MCASP_SOFT_RESET_MCASP_ENABLED_STATUS \
0x00000002 // 1 - MCASP Clocks/resets are
// enabled ; 0 - MCASP Clocks/resets
// are disabled
#define APPS_RCM_MCASP_SOFT_RESET_MCASP_SOFT_RESET \
0x00000001 // 1 - Assert reset for MCASP-core
// ; 0 - De-assert reset for
// MCASP-core
//******************************************************************************
//
// The following are defines for the bit fields in the
// APPS_RCM_O_MMCHS_CLK_GEN register.
//
//******************************************************************************
#define APPS_RCM_MMCHS_CLK_GEN_MMCHS_PLLCKDIV_OFF_TIME_M \
0x00000700 // Configuration of OFF-TIME for
// dividing PLL clk (240 MHz) in
// generation of MMCHS func-clk :
// "000" - 1 "001" - 2 "010" - 3
// "011" - 4 "100" - 5 "101" - 6
// "110" - 7 "111" - 8
#define APPS_RCM_MMCHS_CLK_GEN_MMCHS_PLLCKDIV_OFF_TIME_S 8
#define APPS_RCM_MMCHS_CLK_GEN_NU1_M \
0x000000F8
#define APPS_RCM_MMCHS_CLK_GEN_NU1_S 3
#define APPS_RCM_MMCHS_CLK_GEN_MMCHS_PLLCKDIV_ON_TIME_M \
0x00000007 // Configuration of ON-TIME for
// dividing PLL clk (240 MHz) in
// generation of MMCHS func-clk :
// "000" - 1 "001" - 2 "010" - 3
// "011" - 4 "100" - 5 "101" - 6
// "110" - 7 "111" - 8
#define APPS_RCM_MMCHS_CLK_GEN_MMCHS_PLLCKDIV_ON_TIME_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the
// APPS_RCM_O_MMCHS_CLK_GATING register.
//
//******************************************************************************
#define APPS_RCM_MMCHS_CLK_GATING_NU1_M \
0x00FE0000
#define APPS_RCM_MMCHS_CLK_GATING_NU1_S 17
#define APPS_RCM_MMCHS_CLK_GATING_MMCHS_DSLP_CLK_ENABLE \
0x00010000 // 0 - Disable MMCHS clk during
// deep-sleep mode
#define APPS_RCM_MMCHS_CLK_GATING_NU2_M \
0x0000FE00
#define APPS_RCM_MMCHS_CLK_GATING_NU2_S 9
#define APPS_RCM_MMCHS_CLK_GATING_MMCHS_SLP_CLK_ENABLE \
0x00000100 // 1- Enable MMCHS clk during sleep
// mode ; 0- Disable MMCHS clk
// during sleep mode
#define APPS_RCM_MMCHS_CLK_GATING_NU3_M \
0x000000FE
#define APPS_RCM_MMCHS_CLK_GATING_NU3_S 1
#define APPS_RCM_MMCHS_CLK_GATING_MMCHS_RUN_CLK_ENABLE \
0x00000001 // 1- Enable MMCHS clk during run
// mode ; 0- Disable MMCHS clk
// during run mode
//******************************************************************************
//
// The following are defines for the bit fields in the
// APPS_RCM_O_MMCHS_SOFT_RESET register.
//
//******************************************************************************
#define APPS_RCM_MMCHS_SOFT_RESET_MMCHS_ENABLED_STATUS \
0x00000002 // 1 - MMCHS Clocks/resets are
// enabled ; 0 - MMCHS Clocks/resets
// are disabled
#define APPS_RCM_MMCHS_SOFT_RESET_MMCHS_SOFT_RESET \
0x00000001 // 1 - Assert reset for MMCHS-core
// ; 0 - De-assert reset for
// MMCHS-core
//******************************************************************************
//
// The following are defines for the bit fields in the
// APPS_RCM_O_MCSPI_A1_CLK_GEN register.
//
//******************************************************************************
#define APPS_RCM_MCSPI_A1_CLK_GEN_MCSPI_A1_BAUD_CLK_SEL \
0x00010000 // 0 - XTAL clk is used as baud clk
// for MCSPI_A1 ; 1 - PLL divclk is
// used as baud clk for MCSPI_A1.
#define APPS_RCM_MCSPI_A1_CLK_GEN_NU1_M \
0x0000F800
#define APPS_RCM_MCSPI_A1_CLK_GEN_NU1_S 11
#define APPS_RCM_MCSPI_A1_CLK_GEN_MCSPI_A1_PLLCLKDIV_OFF_TIME_M \
0x00000700 // Configuration of OFF-TIME for
// dividing PLL clk (240 MHz) in
// generation of MCSPI_A1 func-clk :
// "000" - 1 "001" - 2 "010" - 3
// "011" - 4 "100" - 5 "101" - 6
// "110" - 7 "111" - 8
#define APPS_RCM_MCSPI_A1_CLK_GEN_MCSPI_A1_PLLCLKDIV_OFF_TIME_S 8
#define APPS_RCM_MCSPI_A1_CLK_GEN_NU2_M \
0x000000F8
#define APPS_RCM_MCSPI_A1_CLK_GEN_NU2_S 3
#define APPS_RCM_MCSPI_A1_CLK_GEN_MCSPI_A1_PLLCLKDIV_ON_TIME_M \
0x00000007 // Configuration of ON-TIME for
// dividing PLL clk (240 MHz) in
// generation of MCSPI_A1 func-clk :
// "000" - 1 "001" - 2 "010" - 3
// "011" - 4 "100" - 5 "101" - 6
// "110" - 7 "111" - 8
#define APPS_RCM_MCSPI_A1_CLK_GEN_MCSPI_A1_PLLCLKDIV_ON_TIME_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the
// APPS_RCM_O_MCSPI_A1_CLK_GATING register.
//
//******************************************************************************
#define APPS_RCM_MCSPI_A1_CLK_GATING_NU1_M \
0x00FE0000
#define APPS_RCM_MCSPI_A1_CLK_GATING_NU1_S 17
#define APPS_RCM_MCSPI_A1_CLK_GATING_MCSPI_A1_DSLP_CLK_ENABLE \
0x00010000 // 0 - Disable MCSPI_A1 clk during
// deep-sleep mode
#define APPS_RCM_MCSPI_A1_CLK_GATING_NU2_M \
0x0000FE00
#define APPS_RCM_MCSPI_A1_CLK_GATING_NU2_S 9
#define APPS_RCM_MCSPI_A1_CLK_GATING_MCSPI_A1_SLP_CLK_ENABLE \
0x00000100 // 1- Enable MCSPI_A1 clk during
// sleep mode ; 0- Disable MCSPI_A1
// clk during sleep mode
#define APPS_RCM_MCSPI_A1_CLK_GATING_NU3_M \
0x000000FE
#define APPS_RCM_MCSPI_A1_CLK_GATING_NU3_S 1
#define APPS_RCM_MCSPI_A1_CLK_GATING_MCSPI_A1_RUN_CLK_ENABLE \
0x00000001 // 1- Enable MCSPI_A1 clk during
// run mode ; 0- Disable MCSPI_A1
// clk during run mode
//******************************************************************************
//
// The following are defines for the bit fields in the
// APPS_RCM_O_MCSPI_A1_SOFT_RESET register.
//
//******************************************************************************
#define APPS_RCM_MCSPI_A1_SOFT_RESET_MCSPI_A1_ENABLED_STATUS \
0x00000002 // 1 - MCSPI_A1 Clocks/Resets are
// enabled ; 0 - MCSPI_A1
// Clocks/Resets are disabled
#define APPS_RCM_MCSPI_A1_SOFT_RESET_MCSPI_A1_SOFT_RESET \
0x00000001 // 1 - Assert reset for
// MCSPI_A1-core ; 0 - De-assert
// reset for MCSPI_A1-core
//******************************************************************************
//
// The following are defines for the bit fields in the
// APPS_RCM_O_MCSPI_A2_CLK_GEN register.
//
//******************************************************************************
#define APPS_RCM_MCSPI_A2_CLK_GEN_MCSPI_A2_BAUD_CLK_SEL \
0x00010000 // 0 - XTAL clk is used as baud-clk
// for MCSPI_A2 ; 1 - PLL divclk is
// used as baud-clk for MCSPI_A2
#define APPS_RCM_MCSPI_A2_CLK_GEN_NU1_M \
0x0000F800
#define APPS_RCM_MCSPI_A2_CLK_GEN_NU1_S 11
#define APPS_RCM_MCSPI_A2_CLK_GEN_MCSPI_A2_PLLCKDIV_OFF_TIME_M \
0x00000700 // Configuration of OFF-TIME for
// dividing PLL clk (240 MHz) in
// generation of MCSPI_A2 func-clk :
// "000" - 1 "001" - 2 "010" - 3
// "011" - 4 "100" - 5 "101" - 6
// "110" - 7 "111" - 8
#define APPS_RCM_MCSPI_A2_CLK_GEN_MCSPI_A2_PLLCKDIV_OFF_TIME_S 8
#define APPS_RCM_MCSPI_A2_CLK_GEN_NU2_M \
0x000000F8
#define APPS_RCM_MCSPI_A2_CLK_GEN_NU2_S 3
#define APPS_RCM_MCSPI_A2_CLK_GEN_MCSPI_A2_PLLCKDIV_ON_TIME_M \
0x00000007 // Configuration of OFF-TIME for
// dividing PLL clk (240 MHz) in
// generation of MCSPI_A2 func-clk :
// "000" - 1 "001" - 2 "010" - 3
// "011" - 4 "100" - 5 "101" - 6
// "110" - 7 "111" - 8
#define APPS_RCM_MCSPI_A2_CLK_GEN_MCSPI_A2_PLLCKDIV_ON_TIME_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the
// APPS_RCM_O_MCSPI_A2_CLK_GATING register.
//
//******************************************************************************
#define APPS_RCM_MCSPI_A2_CLK_GATING_NU1_M \
0x00FE0000
#define APPS_RCM_MCSPI_A2_CLK_GATING_NU1_S 17
#define APPS_RCM_MCSPI_A2_CLK_GATING_MCSPI_A2_DSLP_CLK_ENABLE \
0x00010000 // 0 - Disable MCSPI_A2 clk during
// deep-sleep mode
#define APPS_RCM_MCSPI_A2_CLK_GATING_NU2_M \
0x0000FE00
#define APPS_RCM_MCSPI_A2_CLK_GATING_NU2_S 9
#define APPS_RCM_MCSPI_A2_CLK_GATING_MCSPI_A2_SLP_CLK_ENABLE \
0x00000100 // 1- Enable MCSPI_A2 clk during
// sleep mode ; 0- Disable MCSPI_A2
// clk during sleep mode
#define APPS_RCM_MCSPI_A2_CLK_GATING_NU3_M \
0x000000FE
#define APPS_RCM_MCSPI_A2_CLK_GATING_NU3_S 1
#define APPS_RCM_MCSPI_A2_CLK_GATING_MCSPI_A2_RUN_CLK_ENABLE \
0x00000001 // 1- Enable MCSPI_A2 clk during
// run mode ; 0- Disable MCSPI_A2
// clk during run mode
//******************************************************************************
//
// The following are defines for the bit fields in the
// APPS_RCM_O_MCSPI_A2_SOFT_RESET register.
//
//******************************************************************************
#define APPS_RCM_MCSPI_A2_SOFT_RESET_MCSPI_A2_ENABLED_STATUS \
0x00000002 // 1 - MCSPI_A2 Clocks/Resets are
// enabled ; 0 - MCSPI_A2
// Clocks/Resets are disabled
#define APPS_RCM_MCSPI_A2_SOFT_RESET_MCSPI_A2_SOFT_RESET \
0x00000001 // 1 - Assert reset for
// MCSPI_A2-core ; 0 - De-assert
// reset for MCSPI_A2-core
//******************************************************************************
//
// The following are defines for the bit fields in the
// APPS_RCM_O_UDMA_A_CLK_GATING register.
//
//******************************************************************************
#define APPS_RCM_UDMA_A_CLK_GATING_UDMA_A_DSLP_CLK_ENABLE \
0x00010000 // 1 - Enable UDMA_A clk during
// deep-sleep mode 0 - Disable
// UDMA_A clk during deep-sleep mode
// ;
#define APPS_RCM_UDMA_A_CLK_GATING_NU1_M \
0x0000FE00
#define APPS_RCM_UDMA_A_CLK_GATING_NU1_S 9
#define APPS_RCM_UDMA_A_CLK_GATING_UDMA_A_SLP_CLK_ENABLE \
0x00000100 // 1 - Enable UDMA_A clk during
// sleep mode 0 - Disable UDMA_A clk
// during sleep mode ;
#define APPS_RCM_UDMA_A_CLK_GATING_NU2_M \
0x000000FE
#define APPS_RCM_UDMA_A_CLK_GATING_NU2_S 1
#define APPS_RCM_UDMA_A_CLK_GATING_UDMA_A_RUN_CLK_ENABLE \
0x00000001 // 1 - Enable UDMA_A clk during run
// mode 0 - Disable UDMA_A clk
// during run mode ;
//******************************************************************************
//
// The following are defines for the bit fields in the
// APPS_RCM_O_UDMA_A_SOFT_RESET register.
//
//******************************************************************************
#define APPS_RCM_UDMA_A_SOFT_RESET_UDMA_A_ENABLED_STATUS \
0x00000002 // 1 - UDMA_A Clocks/Resets are
// enabled ; 0 - UDMA_A
// Clocks/Resets are disabled
#define APPS_RCM_UDMA_A_SOFT_RESET_UDMA_A_SOFT_RESET \
0x00000001 // 1 - Assert reset for DMA_A ; 0 -
// De-assert reset for DMA_A
//******************************************************************************
//
// The following are defines for the bit fields in the
// APPS_RCM_O_GPIO_A_CLK_GATING register.
//
//******************************************************************************
#define APPS_RCM_GPIO_A_CLK_GATING_GPIO_A_DSLP_CLK_ENABLE \
0x00010000 // 1 - Enable GPIO_A clk during
// deep-sleep mode 0 - Disable
// GPIO_A clk during deep-sleep mode
// ;
#define APPS_RCM_GPIO_A_CLK_GATING_NU1_M \
0x0000FE00
#define APPS_RCM_GPIO_A_CLK_GATING_NU1_S 9
#define APPS_RCM_GPIO_A_CLK_GATING_GPIO_A_SLP_CLK_ENABLE \
0x00000100 // 1 - Enable GPIO_A clk during
// sleep mode 0 - Disable GPIO_A clk
// during sleep mode ;
#define APPS_RCM_GPIO_A_CLK_GATING_NU2_M \
0x000000FE
#define APPS_RCM_GPIO_A_CLK_GATING_NU2_S 1
#define APPS_RCM_GPIO_A_CLK_GATING_GPIO_A_RUN_CLK_ENABLE \
0x00000001 // 1 - Enable GPIO_A clk during run
// mode 0 - Disable GPIO_A clk
// during run mode ;
//******************************************************************************
//
// The following are defines for the bit fields in the
// APPS_RCM_O_GPIO_A_SOFT_RESET register.
//
//******************************************************************************
#define APPS_RCM_GPIO_A_SOFT_RESET_GPIO_A_ENABLED_STATUS \
0x00000002 // 1 - GPIO_A Clocks/Resets are
// enabled ; 0 - GPIO_A
// Clocks/Resets are disabled
#define APPS_RCM_GPIO_A_SOFT_RESET_GPIO_A_SOFT_RESET \
0x00000001 // 1 - Assert reset for GPIO_A ; 0
// - De-assert reset for GPIO_A
//******************************************************************************
//
// The following are defines for the bit fields in the
// APPS_RCM_O_GPIO_B_CLK_GATING register.
//
//******************************************************************************
#define APPS_RCM_GPIO_B_CLK_GATING_GPIO_B_DSLP_CLK_ENABLE \
0x00010000 // 1 - Enable GPIO_B clk during
// deep-sleep mode 0 - Disable
// GPIO_B clk during deep-sleep mode
// ;
#define APPS_RCM_GPIO_B_CLK_GATING_NU1_M \
0x0000FE00
#define APPS_RCM_GPIO_B_CLK_GATING_NU1_S 9
#define APPS_RCM_GPIO_B_CLK_GATING_GPIO_B_SLP_CLK_ENABLE \
0x00000100 // 1 - Enable GPIO_B clk during
// sleep mode 0 - Disable GPIO_B clk
// during sleep mode ;
#define APPS_RCM_GPIO_B_CLK_GATING_NU2_M \
0x000000FE
#define APPS_RCM_GPIO_B_CLK_GATING_NU2_S 1
#define APPS_RCM_GPIO_B_CLK_GATING_GPIO_B_RUN_CLK_ENABLE \
0x00000001 // 1 - Enable GPIO_B clk during run
// mode 0 - Disable GPIO_B clk
// during run mode ;
//******************************************************************************
//
// The following are defines for the bit fields in the
// APPS_RCM_O_GPIO_B_SOFT_RESET register.
//
//******************************************************************************
#define APPS_RCM_GPIO_B_SOFT_RESET_GPIO_B_ENABLED_STATUS \
0x00000002 // 1 - GPIO_B Clocks/Resets are
// enabled ; 0 - GPIO_B
// Clocks/Resets are disabled
#define APPS_RCM_GPIO_B_SOFT_RESET_GPIO_B_SOFT_RESET \
0x00000001 // 1 - Assert reset for GPIO_B ; 0
// - De-assert reset for GPIO_B
//******************************************************************************
//
// The following are defines for the bit fields in the
// APPS_RCM_O_GPIO_C_CLK_GATING register.
//
//******************************************************************************
#define APPS_RCM_GPIO_C_CLK_GATING_GPIO_C_DSLP_CLK_ENABLE \
0x00010000 // 1 - Enable GPIO_C clk during
// deep-sleep mode 0 - Disable
// GPIO_C clk during deep-sleep mode
// ;
#define APPS_RCM_GPIO_C_CLK_GATING_NU1_M \
0x0000FE00
#define APPS_RCM_GPIO_C_CLK_GATING_NU1_S 9
#define APPS_RCM_GPIO_C_CLK_GATING_GPIO_C_SLP_CLK_ENABLE \
0x00000100 // 1 - Enable GPIO_C clk during
// sleep mode 0 - Disable GPIO_C clk
// during sleep mode ;
#define APPS_RCM_GPIO_C_CLK_GATING_NU2_M \
0x000000FE
#define APPS_RCM_GPIO_C_CLK_GATING_NU2_S 1
#define APPS_RCM_GPIO_C_CLK_GATING_GPIO_C_RUN_CLK_ENABLE \
0x00000001 // 1 - Enable GPIO_C clk during run
// mode 0 - Disable GPIO_C clk
// during run mode ;
//******************************************************************************
//
// The following are defines for the bit fields in the
// APPS_RCM_O_GPIO_C_SOFT_RESET register.
//
//******************************************************************************
#define APPS_RCM_GPIO_C_SOFT_RESET_GPIO_C_ENABLED_STATUS \
0x00000002 // 1 - GPIO_C Clocks/Resets are
// enabled ; 0 - GPIO_C
// Clocks/Resets are disabled
#define APPS_RCM_GPIO_C_SOFT_RESET_GPIO_C_SOFT_RESET \
0x00000001 // 1 - Assert reset for GPIO_C ; 0
// - De-assert reset for GPIO_C
//******************************************************************************
//
// The following are defines for the bit fields in the
// APPS_RCM_O_GPIO_D_CLK_GATING register.
//
//******************************************************************************
#define APPS_RCM_GPIO_D_CLK_GATING_GPIO_D_DSLP_CLK_ENABLE \
0x00010000 // 1 - Enable GPIO_D clk during
// deep-sleep mode 0 - Disable
// GPIO_D clk during deep-sleep mode
// ;
#define APPS_RCM_GPIO_D_CLK_GATING_NU1_M \
0x0000FE00
#define APPS_RCM_GPIO_D_CLK_GATING_NU1_S 9
#define APPS_RCM_GPIO_D_CLK_GATING_GPIO_D_SLP_CLK_ENABLE \
0x00000100 // 1 - Enable GPIO_D clk during
// sleep mode 0 - Disable GPIO_D clk
// during sleep mode ;
#define APPS_RCM_GPIO_D_CLK_GATING_NU2_M \
0x000000FE
#define APPS_RCM_GPIO_D_CLK_GATING_NU2_S 1
#define APPS_RCM_GPIO_D_CLK_GATING_GPIO_D_RUN_CLK_ENABLE \
0x00000001 // 1 - Enable GPIO_D clk during run
// mode 0 - Disable GPIO_D clk
// during run mode ;
//******************************************************************************
//
// The following are defines for the bit fields in the
// APPS_RCM_O_GPIO_D_SOFT_RESET register.
//
//******************************************************************************
#define APPS_RCM_GPIO_D_SOFT_RESET_GPIO_D_ENABLED_STATUS \
0x00000002 // 1 - GPIO_D Clocks/Resets are
// enabled ; 0 - GPIO_D
// Clocks/Resets are disabled
#define APPS_RCM_GPIO_D_SOFT_RESET_GPIO_D_SOFT_RESET \
0x00000001 // 1 - Assert reset for GPIO_D ; 0
// - De-assert reset for GPIO_D
//******************************************************************************
//
// The following are defines for the bit fields in the
// APPS_RCM_O_GPIO_E_CLK_GATING register.
//
//******************************************************************************
#define APPS_RCM_GPIO_E_CLK_GATING_GPIO_E_DSLP_CLK_ENABLE \
0x00010000 // 1 - Enable GPIO_E clk during
// deep-sleep mode 0 - Disable
// GPIO_E clk during deep-sleep mode
// ;
#define APPS_RCM_GPIO_E_CLK_GATING_NU1_M \
0x0000FE00
#define APPS_RCM_GPIO_E_CLK_GATING_NU1_S 9
#define APPS_RCM_GPIO_E_CLK_GATING_GPIO_E_SLP_CLK_ENABLE \
0x00000100 // 1 - Enable GPIO_E clk during
// sleep mode 0 - Disable GPIO_E clk
// during sleep mode ;
#define APPS_RCM_GPIO_E_CLK_GATING_NU2_M \
0x000000FE
#define APPS_RCM_GPIO_E_CLK_GATING_NU2_S 1
#define APPS_RCM_GPIO_E_CLK_GATING_GPIO_E_RUN_CLK_ENABLE \
0x00000001 // 1 - Enable GPIO_E clk during run
// mode 0 - Disable GPIO_E clk
// during run mode ;
//******************************************************************************
//
// The following are defines for the bit fields in the
// APPS_RCM_O_GPIO_E_SOFT_RESET register.
//
//******************************************************************************
#define APPS_RCM_GPIO_E_SOFT_RESET_GPIO_E_ENABLED_STATUS \
0x00000002 // 1 - GPIO_E Clocks/Resets are
// enabled ; 0 - GPIO_E
// Clocks/Resets are disabled
#define APPS_RCM_GPIO_E_SOFT_RESET_GPIO_E_SOFT_RESET \
0x00000001 // 1 - Assert reset for GPIO_E ; 0
// - De-assert reset for GPIO_E
//******************************************************************************
//
// The following are defines for the bit fields in the
// APPS_RCM_O_WDOG_A_CLK_GATING register.
//
//******************************************************************************
#define APPS_RCM_WDOG_A_CLK_GATING_WDOG_A_BAUD_CLK_SEL_M \
0x03000000 // "00" - Sysclk ; "01" - REF_CLK
// (38.4 MHz) ; "10/11" - Slow_clk
#define APPS_RCM_WDOG_A_CLK_GATING_WDOG_A_BAUD_CLK_SEL_S 24
#define APPS_RCM_WDOG_A_CLK_GATING_WDOG_A_DSLP_CLK_ENABLE \
0x00010000 // 1 - Enable WDOG_A clk during
// deep-sleep mode 0 - Disable
// WDOG_A clk during deep-sleep mode
// ;
#define APPS_RCM_WDOG_A_CLK_GATING_NU1_M \
0x0000FE00
#define APPS_RCM_WDOG_A_CLK_GATING_NU1_S 9
#define APPS_RCM_WDOG_A_CLK_GATING_WDOG_A_SLP_CLK_ENABLE \
0x00000100 // 1 - Enable WDOG_A clk during
// sleep mode 0 - Disable WDOG_A clk
// during sleep mode ;
#define APPS_RCM_WDOG_A_CLK_GATING_NU2_M \
0x000000FE
#define APPS_RCM_WDOG_A_CLK_GATING_NU2_S 1
#define APPS_RCM_WDOG_A_CLK_GATING_WDOG_A_RUN_CLK_ENABLE \
0x00000001 // 1 - Enable WDOG_A clk during run
// mode 0 - Disable WDOG_A clk
// during run mode ;
//******************************************************************************
//
// The following are defines for the bit fields in the
// APPS_RCM_O_WDOG_A_SOFT_RESET register.
//
//******************************************************************************
#define APPS_RCM_WDOG_A_SOFT_RESET_WDOG_A_ENABLED_STATUS \
0x00000002 // 1 - WDOG_A Clocks/Resets are
// enabled ; 0 - WDOG_A
// Clocks/Resets are disabled
#define APPS_RCM_WDOG_A_SOFT_RESET_WDOG_A_SOFT_RESET \
0x00000001 // 1 - Assert reset for WDOG_A ; 0
// - De-assert reset for WDOG_A
//******************************************************************************
//
// The following are defines for the bit fields in the
// APPS_RCM_O_UART_A0_CLK_GATING register.
//
//******************************************************************************
#define APPS_RCM_UART_A0_CLK_GATING_UART_A0_DSLP_CLK_ENABLE \
0x00010000 // 1 - Enable UART_A0 clk during
// deep-sleep mode 0 - Disable
// UART_A0 clk during deep-sleep
// mode ;
#define APPS_RCM_UART_A0_CLK_GATING_NU1_M \
0x0000FE00
#define APPS_RCM_UART_A0_CLK_GATING_NU1_S 9
#define APPS_RCM_UART_A0_CLK_GATING_UART_A0_SLP_CLK_ENABLE \
0x00000100 // 1 - Enable UART_A0 clk during
// sleep mode 0 - Disable UART_A0
// clk during sleep mode ;
#define APPS_RCM_UART_A0_CLK_GATING_NU2_M \
0x000000FE
#define APPS_RCM_UART_A0_CLK_GATING_NU2_S 1
#define APPS_RCM_UART_A0_CLK_GATING_UART_A0_RUN_CLK_ENABLE \
0x00000001 // 1 - Enable UART_A0 clk during
// run mode 0 - Disable UART_A0 clk
// during run mode ;
//******************************************************************************
//
// The following are defines for the bit fields in the
// APPS_RCM_O_UART_A0_SOFT_RESET register.
//
//******************************************************************************
#define APPS_RCM_UART_A0_SOFT_RESET_UART_A0_ENABLED_STATUS \
0x00000002 // 1 - UART_A0 Clocks/Resets are
// enabled ; 0 - UART_A0
// Clocks/Resets are disabled
#define APPS_RCM_UART_A0_SOFT_RESET_UART_A0_SOFT_RESET \
0x00000001 // 1 - Assert reset for UART_A0 ; 0
// - De-assert reset for UART_A0
//******************************************************************************
//
// The following are defines for the bit fields in the
// APPS_RCM_O_UART_A1_CLK_GATING register.
//
//******************************************************************************
#define APPS_RCM_UART_A1_CLK_GATING_UART_A1_DSLP_CLK_ENABLE \
0x00010000 // 1 - Enable UART_A1 clk during
// deep-sleep mode 0 - Disable
// UART_A1 clk during deep-sleep
// mode ;
#define APPS_RCM_UART_A1_CLK_GATING_NU1_M \
0x0000FE00
#define APPS_RCM_UART_A1_CLK_GATING_NU1_S 9
#define APPS_RCM_UART_A1_CLK_GATING_UART_A1_SLP_CLK_ENABLE \
0x00000100 // 1 - Enable UART_A1 clk during
// sleep mode 0 - Disable UART_A1
// clk during sleep mode ;
#define APPS_RCM_UART_A1_CLK_GATING_NU2_M \
0x000000FE
#define APPS_RCM_UART_A1_CLK_GATING_NU2_S 1
#define APPS_RCM_UART_A1_CLK_GATING_UART_A1_RUN_CLK_ENABLE \
0x00000001 // 1 - Enable UART_A1 clk during
// run mode 0 - Disable UART_A1 clk
// during run mode ;
//******************************************************************************
//
// The following are defines for the bit fields in the
// APPS_RCM_O_UART_A1_SOFT_RESET register.
//
//******************************************************************************
#define APPS_RCM_UART_A1_SOFT_RESET_UART_A1_ENABLED_STATUS \
0x00000002 // 1 - UART_A1 Clocks/Resets are
// enabled ; 0 - UART_A1
// Clocks/Resets are disabled
#define APPS_RCM_UART_A1_SOFT_RESET_UART_A1_SOFT_RESET \
0x00000001 // 1 - Assert the soft reset for
// UART_A1 ; 0 - De-assert the soft
// reset for UART_A1
//******************************************************************************
//
// The following are defines for the bit fields in the
// APPS_RCM_O_GPT_A0_CLK_GATING register.
//
//******************************************************************************
#define APPS_RCM_GPT_A0_CLK_GATING_GPT_A0_DSLP_CLK_ENABLE \
0x00010000 // 1 - Enable the GPT_A0 clock
// during deep-sleep ; 0 - Disable
// the GPT_A0 clock during
// deep-sleep
#define APPS_RCM_GPT_A0_CLK_GATING_NU1_M \
0x0000FE00
#define APPS_RCM_GPT_A0_CLK_GATING_NU1_S 9
#define APPS_RCM_GPT_A0_CLK_GATING_GPT_A0_SLP_CLK_ENABLE \
0x00000100 // 1 - Enable the GPT_A0 clock
// during sleep ; 0 - Disable the
// GPT_A0 clock during sleep
#define APPS_RCM_GPT_A0_CLK_GATING_NU2_M \
0x000000FE
#define APPS_RCM_GPT_A0_CLK_GATING_NU2_S 1
#define APPS_RCM_GPT_A0_CLK_GATING_GPT_A0_RUN_CLK_ENABLE \
0x00000001 // 1 - Enable the GPT_A0 clock
// during run ; 0 - Disable the
// GPT_A0 clock during run
//******************************************************************************
//
// The following are defines for the bit fields in the
// APPS_RCM_O_GPT_A0_SOFT_RESET register.
//
//******************************************************************************
#define APPS_RCM_GPT_A0_SOFT_RESET_GPT_A0_ENABLED_STATUS \
0x00000002 // 1 - GPT_A0 clocks/resets are
// enabled ; 0 - GPT_A0
// clocks/resets are disabled
#define APPS_RCM_GPT_A0_SOFT_RESET_GPT_A0_SOFT_RESET \
0x00000001 // 1 - Assert the soft reset for
// GPT_A0 ; 0 - De-assert the soft
// reset for GPT_A0
//******************************************************************************
//
// The following are defines for the bit fields in the
// APPS_RCM_O_GPT_A1_CLK_GATING register.
//
//******************************************************************************
#define APPS_RCM_GPT_A1_CLK_GATING_GPT_A1_DSLP_CLK_ENABLE \
0x00010000 // 1 - Enable the GPT_A1 clock
// during deep-sleep ; 0 - Disable
// the GPT_A1 clock during
// deep-sleep
#define APPS_RCM_GPT_A1_CLK_GATING_NU1_M \
0x0000FE00
#define APPS_RCM_GPT_A1_CLK_GATING_NU1_S 9
#define APPS_RCM_GPT_A1_CLK_GATING_GPT_A1_SLP_CLK_ENABLE \
0x00000100 // 1 - Enable the GPT_A1 clock
// during sleep ; 0 - Disable the
// GPT_A1 clock during sleep
#define APPS_RCM_GPT_A1_CLK_GATING_NU2_M \
0x000000FE
#define APPS_RCM_GPT_A1_CLK_GATING_NU2_S 1
#define APPS_RCM_GPT_A1_CLK_GATING_GPT_A1_RUN_CLK_ENABLE \
0x00000001 // 1 - Enable the GPT_A1 clock
// during run ; 0 - Disable the
// GPT_A1 clock during run
//******************************************************************************
//
// The following are defines for the bit fields in the
// APPS_RCM_O_GPT_A1_SOFT_RESET register.
//
//******************************************************************************
#define APPS_RCM_GPT_A1_SOFT_RESET_GPT_A1_ENABLED_STATUS \
0x00000002 // 1 - GPT_A1 clocks/resets are
// enabled ; 0 - GPT_A1
// clocks/resets are disabled
#define APPS_RCM_GPT_A1_SOFT_RESET_GPT_A1_SOFT_RESET \
0x00000001 // 1 - Assert the soft reset for
// GPT_A1 ; 0 - De-assert the soft
// reset for GPT_A1
//******************************************************************************
//
// The following are defines for the bit fields in the
// APPS_RCM_O_GPT_A2_CLK_GATING register.
//
//******************************************************************************
#define APPS_RCM_GPT_A2_CLK_GATING_GPT_A2_DSLP_CLK_ENABLE \
0x00010000 // 1 - Enable the GPT_A2 clock
// during deep-sleep ; 0 - Disable
// the GPT_A2 clock during
// deep-sleep
#define APPS_RCM_GPT_A2_CLK_GATING_NU1_M \
0x0000FE00
#define APPS_RCM_GPT_A2_CLK_GATING_NU1_S 9
#define APPS_RCM_GPT_A2_CLK_GATING_GPT_A2_SLP_CLK_ENABLE \
0x00000100 // 1 - Enable the GPT_A2 clock
// during sleep ; 0 - Disable the
// GPT_A2 clock during sleep
#define APPS_RCM_GPT_A2_CLK_GATING_NU2_M \
0x000000FE
#define APPS_RCM_GPT_A2_CLK_GATING_NU2_S 1
#define APPS_RCM_GPT_A2_CLK_GATING_GPT_A2_RUN_CLK_ENABLE \
0x00000001 // 1 - Enable the GPT_A2 clock
// during run ; 0 - Disable the
// GPT_A2 clock during run
//******************************************************************************
//
// The following are defines for the bit fields in the
// APPS_RCM_O_GPT_A2_SOFT_RESET register.
//
//******************************************************************************
#define APPS_RCM_GPT_A2_SOFT_RESET_GPT_A2_ENABLED_STATUS \
0x00000002 // 1 - GPT_A2 clocks/resets are
// enabled ; 0 - GPT_A2
// clocks/resets are disabled
#define APPS_RCM_GPT_A2_SOFT_RESET_GPT_A2_SOFT_RESET \
0x00000001 // 1 - Assert the soft reset for
// GPT_A2 ; 0 - De-assert the soft
// reset for GPT_A2
//******************************************************************************
//
// The following are defines for the bit fields in the
// APPS_RCM_O_GPT_A3_CLK_GATING register.
//
//******************************************************************************
#define APPS_RCM_GPT_A3_CLK_GATING_GPT_A3_DSLP_CLK_ENABLE \
0x00010000 // 1 - Enable the GPT_A3 clock
// during deep-sleep ; 0 - Disable
// the GPT_A3 clock during
// deep-sleep
#define APPS_RCM_GPT_A3_CLK_GATING_NU1_M \
0x0000FE00
#define APPS_RCM_GPT_A3_CLK_GATING_NU1_S 9
#define APPS_RCM_GPT_A3_CLK_GATING_GPT_A3_SLP_CLK_ENABLE \
0x00000100 // 1 - Enable the GPT_A3 clock
// during sleep ; 0 - Disable the
// GPT_A3 clock during sleep
#define APPS_RCM_GPT_A3_CLK_GATING_NU2_M \
0x000000FE
#define APPS_RCM_GPT_A3_CLK_GATING_NU2_S 1
#define APPS_RCM_GPT_A3_CLK_GATING_GPT_A3_RUN_CLK_ENABLE \
0x00000001 // 1 - Enable the GPT_A3 clock
// during run ; 0 - Disable the
// GPT_A3 clock during run
//******************************************************************************
//
// The following are defines for the bit fields in the
// APPS_RCM_O_GPT_A3_SOFT_RESET register.
//
//******************************************************************************
#define APPS_RCM_GPT_A3_SOFT_RESET_GPT_A3_ENABLED_STATUS \
0x00000002 // 1 - GPT_A3 Clocks/resets are
// enabled ; 0 - GPT_A3
// Clocks/resets are disabled
#define APPS_RCM_GPT_A3_SOFT_RESET_GPT_A3_SOFT_RESET \
0x00000001 // 1 - Assert the soft reset for
// GPT_A3 ; 0 - De-assert the soft
// reset for GPT_A3
//******************************************************************************
//
// The following are defines for the bit fields in the
// APPS_RCM_O_MCASP_FRAC_CLK_CONFIG0 register.
//
//******************************************************************************
#define APPS_RCM_MCASP_FRAC_CLK_CONFIG0_MCASP_FRAC_DIV_DIVISOR_M \
0x03FF0000
#define APPS_RCM_MCASP_FRAC_CLK_CONFIG0_MCASP_FRAC_DIV_DIVISOR_S 16
#define APPS_RCM_MCASP_FRAC_CLK_CONFIG0_MCASP_FRAC_DIV_FRACTION_M \
0x0000FFFF
#define APPS_RCM_MCASP_FRAC_CLK_CONFIG0_MCASP_FRAC_DIV_FRACTION_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the
// APPS_RCM_O_MCASP_FRAC_CLK_CONFIG1 register.
//
//******************************************************************************
#define APPS_RCM_MCASP_FRAC_CLK_CONFIG1_MCASP_FRAC_DIV_SOFT_RESET \
0x00010000 // 1 - Assert the reset for MCASP
// Frac-clk div; 0 - Donot assert
// the reset for MCASP frac clk-div
#define APPS_RCM_MCASP_FRAC_CLK_CONFIG1_MCASP_FRAC_DIV_PERIOD_M \
0x000003FF
#define APPS_RCM_MCASP_FRAC_CLK_CONFIG1_MCASP_FRAC_DIV_PERIOD_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the
// APPS_RCM_O_CRYPTO_CLK_GATING register.
//
//******************************************************************************
#define APPS_RCM_CRYPTO_CLK_GATING_CRYPTO_DSLP_CLK_ENABLE \
0x00010000 // 0 - Disable the Crypto clock
// during deep-sleep
#define APPS_RCM_CRYPTO_CLK_GATING_NU1_M \
0x0000FE00
#define APPS_RCM_CRYPTO_CLK_GATING_NU1_S 9
#define APPS_RCM_CRYPTO_CLK_GATING_CRYPTO_SLP_CLK_ENABLE \
0x00000100 // 1 - Enable the Crypto clock
// during sleep ; 0 - Disable the
// Crypto clock during sleep
#define APPS_RCM_CRYPTO_CLK_GATING_NU2_M \
0x000000FE
#define APPS_RCM_CRYPTO_CLK_GATING_NU2_S 1
#define APPS_RCM_CRYPTO_CLK_GATING_CRYPTO_RUN_CLK_ENABLE \
0x00000001 // 1 - Enable the Crypto clock
// during run ; 0 - Disable the
// Crypto clock during run
//******************************************************************************
//
// The following are defines for the bit fields in the
// APPS_RCM_O_CRYPTO_SOFT_RESET register.
//
//******************************************************************************
#define APPS_RCM_CRYPTO_SOFT_RESET_CRYPTO_ENABLED_STATUS \
0x00000002 // 1 - Crypto clocks/resets are
// enabled ; 0 - Crypto
// clocks/resets are disabled
#define APPS_RCM_CRYPTO_SOFT_RESET_CRYPTO_SOFT_RESET \
0x00000001 // 1 - Assert the soft reset for
// Crypto ; 0 - De-assert the soft
// reset for Crypto
//******************************************************************************
//
// The following are defines for the bit fields in the
// APPS_RCM_O_MCSPI_S0_CLK_GATING register.
//
//******************************************************************************
#define APPS_RCM_MCSPI_S0_CLK_GATING_MCSPI_S0_DSLP_CLK_ENABLE \
0x00010000 // 0 - Disable the MCSPI_S0 clock
// during deep-sleep
#define APPS_RCM_MCSPI_S0_CLK_GATING_NU1_M \
0x0000FE00
#define APPS_RCM_MCSPI_S0_CLK_GATING_NU1_S 9
#define APPS_RCM_MCSPI_S0_CLK_GATING_MCSPI_S0_SLP_CLK_ENABLE \
0x00000100 // 1 - Enable the MCSPI_S0 clock
// during sleep ; 0 - Disable the
// MCSPI_S0 clock during sleep
#define APPS_RCM_MCSPI_S0_CLK_GATING_NU2_M \
0x000000FE
#define APPS_RCM_MCSPI_S0_CLK_GATING_NU2_S 1
#define APPS_RCM_MCSPI_S0_CLK_GATING_MCSPI_S0_RUN_CLK_ENABLE \
0x00000001 // 1 - Enable the MCSPI_S0 clock
// during run ; 0 - Disable the
// MCSPI_S0 clock during run
//******************************************************************************
//
// The following are defines for the bit fields in the
// APPS_RCM_O_MCSPI_S0_SOFT_RESET register.
//
//******************************************************************************
#define APPS_RCM_MCSPI_S0_SOFT_RESET_MCSPI_S0_ENABLED_STATUS \
0x00000002 // 1 - MCSPI_S0 Clocks/Resets are
// enabled ; 0 - MCSPI_S0
// Clocks/resets are disabled
#define APPS_RCM_MCSPI_S0_SOFT_RESET_MCSPI_S0_SOFT_RESET \
0x00000001 // 1 - Assert the soft reset for
// MCSPI_S0 ; 0 - De-assert the soft
// reset for MCSPI_S0
//******************************************************************************
//
// The following are defines for the bit fields in the
// APPS_RCM_O_MCSPI_S0_CLKDIV_CFG register.
//
//******************************************************************************
#define APPS_RCM_MCSPI_S0_CLKDIV_CFG_MCSPI_S0_BAUD_CLK_SEL \
0x00010000 // 0 - XTAL clk is used as baud-clk
// for MCSPI_S0 ; 1 - PLL divclk is
// used as buad-clk for MCSPI_S0
#define APPS_RCM_MCSPI_S0_CLKDIV_CFG_NU1_M \
0x0000F800
#define APPS_RCM_MCSPI_S0_CLKDIV_CFG_NU1_S 11
#define APPS_RCM_MCSPI_S0_CLKDIV_CFG_MCSPI_S0_PLLCLKDIV_OFF_TIME_M \
0x00000700 // Configuration of OFF-TIME for
// dividing PLL clk (240 MHz) in
// generation of MCSPI_S0 func-clk :
// "000" - 1 "001" - 2 "010" - 3
// "011" - 4 "100" - 5 "101" - 6
// "110" - 7 "111" - 8
#define APPS_RCM_MCSPI_S0_CLKDIV_CFG_MCSPI_S0_PLLCLKDIV_OFF_TIME_S 8
#define APPS_RCM_MCSPI_S0_CLKDIV_CFG_NU2_M \
0x000000F8
#define APPS_RCM_MCSPI_S0_CLKDIV_CFG_NU2_S 3
#define APPS_RCM_MCSPI_S0_CLKDIV_CFG_MCSPI_S0_PLLCLKDIV_ON_TIME_M \
0x00000007 // Configuration of ON-TIME for
// dividing PLL clk (240 MHz) in
// generation of MCSPI_S0 func-clk :
// "000" - 1 "001" - 2 "010" - 3
// "011" - 4 "100" - 5 "101" - 6
// "110" - 7 "111" - 8
#define APPS_RCM_MCSPI_S0_CLKDIV_CFG_MCSPI_S0_PLLCLKDIV_ON_TIME_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the
// APPS_RCM_O_I2C_CLK_GATING register.
//
//******************************************************************************
#define APPS_RCM_I2C_CLK_GATING_I2C_DSLP_CLK_ENABLE \
0x00010000 // 1 - Enable the I2C Clock during
// deep-sleep 0 - Disable the I2C
// clock during deep-sleep
#define APPS_RCM_I2C_CLK_GATING_NU1_M \
0x0000FE00
#define APPS_RCM_I2C_CLK_GATING_NU1_S 9
#define APPS_RCM_I2C_CLK_GATING_I2C_SLP_CLK_ENABLE \
0x00000100 // 1 - Enable the I2C clock during
// sleep ; 0 - Disable the I2C clock
// during sleep
#define APPS_RCM_I2C_CLK_GATING_NU2_M \
0x000000FE
#define APPS_RCM_I2C_CLK_GATING_NU2_S 1
#define APPS_RCM_I2C_CLK_GATING_I2C_RUN_CLK_ENABLE \
0x00000001 // 1 - Enable the I2C clock during
// run ; 0 - Disable the I2C clock
// during run
//******************************************************************************
//
// The following are defines for the bit fields in the
// APPS_RCM_O_I2C_SOFT_RESET register.
//
//******************************************************************************
#define APPS_RCM_I2C_SOFT_RESET_I2C_ENABLED_STATUS \
0x00000002 // 1 - I2C Clocks/Resets are
// enabled ; 0 - I2C clocks/resets
// are disabled
#define APPS_RCM_I2C_SOFT_RESET_I2C_SOFT_RESET \
0x00000001 // 1 - Assert the soft reset for
// Shared-I2C ; 0 - De-assert the
// soft reset for Shared-I2C
//******************************************************************************
//
// The following are defines for the bit fields in the
// APPS_RCM_O_APPS_LPDS_REQ register.
//
//******************************************************************************
#define APPS_RCM_APPS_LPDS_REQ_APPS_LPDS_REQ \
0x00000001 // 1 - Request for LPDS
//******************************************************************************
//
// The following are defines for the bit fields in the
// APPS_RCM_O_APPS_TURBO_REQ register.
//
//******************************************************************************
#define APPS_RCM_APPS_TURBO_REQ_APPS_TURBO_REQ \
0x00000001 // 1 - Request for TURBO
//******************************************************************************
//
// The following are defines for the bit fields in the
// APPS_RCM_O_APPS_DSLP_WAKE_CONFIG register.
//
//******************************************************************************
#define APPS_RCM_APPS_DSLP_WAKE_CONFIG_DSLP_WAKE_FROM_NWP_ENABLE \
0x00000002 // 1 - Enable the NWP to wake APPS
// from deep-sleep ; 0 - Disable NWP
// to wake APPS from deep-sleep
#define APPS_RCM_APPS_DSLP_WAKE_CONFIG_DSLP_WAKE_TIMER_ENABLE \
0x00000001 // 1 - Enable deep-sleep wake timer
// in APPS RCM for deep-sleep; 0 -
// Disable deep-sleep wake timer in
// APPS RCM
//******************************************************************************
//
// The following are defines for the bit fields in the
// APPS_RCM_O_APPS_DSLP_WAKE_TIMER_CFG register.
//
//******************************************************************************
#define APPS_RCM_APPS_DSLP_WAKE_TIMER_CFG_DSLP_WAKE_TIMER_OPP_CFG_M \
0xFFFF0000 // Configuration (in slow_clks)
// which says when to request for
// OPP during deep-sleep exit
#define APPS_RCM_APPS_DSLP_WAKE_TIMER_CFG_DSLP_WAKE_TIMER_OPP_CFG_S 16
#define APPS_RCM_APPS_DSLP_WAKE_TIMER_CFG_DSLP_WAKE_TIMER_WAKE_CFG_M \
0x0000FFFF // Configuration (in slow_clks)
// which says when to request for
// WAKE during deep-sleep exit
#define APPS_RCM_APPS_DSLP_WAKE_TIMER_CFG_DSLP_WAKE_TIMER_WAKE_CFG_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the
// APPS_RCM_O_APPS_RCM_SLP_WAKE_ENABLE register.
//
//******************************************************************************
#define APPS_RCM_APPS_RCM_SLP_WAKE_ENABLE_SLP_WAKE_FROM_NWP_ENABLE \
0x00000002 // 1- Enable the sleep wakeup due
// to NWP request. 0- Disable the
// sleep wakeup due to NWP request
#define APPS_RCM_APPS_RCM_SLP_WAKE_ENABLE_SLP_WAKE_TIMER_ENABLE \
0x00000001 // 1- Enable the sleep wakeup due
// to sleep-timer; 0-Disable the
// sleep wakeup due to sleep-timer
//******************************************************************************
//
// The following are defines for the bit fields in the
// APPS_RCM_O_APPS_SLP_WAKETIMER_CFG register.
//
//******************************************************************************
#define APPS_RCM_APPS_SLP_WAKETIMER_CFG_SLP_WAKE_TIMER_CFG_M \
0xFFFFFFFF // Configuration (number of
// sysclks-80MHz) for the Sleep
// wakeup timer
#define APPS_RCM_APPS_SLP_WAKETIMER_CFG_SLP_WAKE_TIMER_CFG_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the
// APPS_RCM_O_APPS_TO_NWP_WAKE_REQUEST register.
//
//******************************************************************************
#define APPS_RCM_APPS_TO_NWP_WAKE_REQUEST_APPS_TO_NWP_WAKEUP_REQUEST \
0x00000001 // When 1 => APPS generated a wake
// request to NWP (When NWP is in
// any of its low-power modes :
// SLP/DSLP/LPDS)
//******************************************************************************
//
// The following are defines for the bit fields in the
// APPS_RCM_O_APPS_RCM_INTERRUPT_STATUS register.
//
//******************************************************************************
#define APPS_RCM_APPS_RCM_INTERRUPT_STATUS_apps_deep_sleep_timer_wake \
0x00000008 // 1 - Indicates that deep-sleep
// timer expiry had caused the
// wakeup from deep-sleep
#define APPS_RCM_APPS_RCM_INTERRUPT_STATUS_apps_sleep_timer_wake \
0x00000004 // 1 - Indicates that sleep timer
// expiry had caused the wakeup from
// sleep
#define APPS_RCM_APPS_RCM_INTERRUPT_STATUS_apps_deep_sleep_wake_from_nwp \
0x00000002 // 1 - Indicates that NWP had
// caused the wakeup from deep-sleep
#define APPS_RCM_APPS_RCM_INTERRUPT_STATUS_apps_sleep_wake_from_nwp \
0x00000001 // 1 - Indicates that NWP had
// caused the wakeup from Sleep
#endif // __HW_APPS_RCM_H__
Reference in New Issue View Git Blame Copy Permalink