192 lines
6.4 KiB
C
192 lines
6.4 KiB
C
/*
|
|
* This file is part of the MicroPython project, http://micropython.org/
|
|
*
|
|
* This file initialises the USB (tinyUSB) and USART (SERCOM). Board USART settings
|
|
* are set in 'boards/<board>/mpconfigboard.h.
|
|
*
|
|
* IMPORTANT: Please refer to "I/O Multiplexing and Considerations" chapters
|
|
* in device datasheets for I/O Pin functions and assignments.
|
|
*
|
|
* The MIT License (MIT)
|
|
*
|
|
* Copyright (c) 2019 Damien P. George
|
|
* Copyright (c) 2022 Robert Hammelrath
|
|
*
|
|
* Permission is hereby granted, free of charge, to any person obtaining a copy
|
|
* of this software and associated documentation files (the "Software"), to deal
|
|
* in the Software without restriction, including without limitation the rights
|
|
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
|
|
* copies of the Software, and to permit persons to whom the Software is
|
|
* furnished to do so, subject to the following conditions:
|
|
*
|
|
* The above copyright notice and this permission notice shall be included in
|
|
* all copies or substantial portions of the Software.
|
|
*
|
|
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
|
|
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
|
|
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
|
|
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
|
|
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
|
|
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
|
|
* THE SOFTWARE.
|
|
*/
|
|
|
|
#include "py/runtime.h"
|
|
#include "modmachine.h"
|
|
#include "samd_soc.h"
|
|
#include "sam.h"
|
|
#include "tusb.h"
|
|
#include "mphalport.h"
|
|
|
|
#if MICROPY_PY_MACHINE_RTC
|
|
extern void machine_rtc_start(bool force);
|
|
#endif
|
|
|
|
static void usb_init(void) {
|
|
// Init USB clock
|
|
#if defined(MCU_SAMD21)
|
|
GCLK->CLKCTRL.reg = GCLK_CLKCTRL_CLKEN | GCLK_CLKCTRL_GEN_GCLK5 | GCLK_CLKCTRL_ID_USB;
|
|
PM->AHBMASK.bit.USB_ = 1;
|
|
PM->APBBMASK.bit.USB_ = 1;
|
|
uint8_t alt = 6; // alt G, USB
|
|
#elif defined(MCU_SAMD51)
|
|
GCLK->PCHCTRL[USB_GCLK_ID].reg = GCLK_PCHCTRL_CHEN | GCLK_PCHCTRL_GEN_GCLK5;
|
|
while (GCLK->PCHCTRL[USB_GCLK_ID].bit.CHEN == 0) {
|
|
}
|
|
MCLK->AHBMASK.bit.USB_ = 1;
|
|
MCLK->APBBMASK.bit.USB_ = 1;
|
|
uint8_t alt = 7; // alt H, USB
|
|
#endif
|
|
|
|
// Init USB pins
|
|
PORT->Group[0].DIRSET.reg = 1 << 25 | 1 << 24;
|
|
PORT->Group[0].OUTCLR.reg = 1 << 25 | 1 << 24;
|
|
PORT->Group[0].PMUX[12].reg = alt << 4 | alt;
|
|
PORT->Group[0].PINCFG[24].reg = PORT_PINCFG_PMUXEN;
|
|
PORT->Group[0].PINCFG[25].reg = PORT_PINCFG_PMUXEN;
|
|
|
|
tusb_init();
|
|
}
|
|
|
|
// Initialize the µs counter on TC 0/1 or TC4/5
|
|
void init_us_counter(void) {
|
|
#if defined(MCU_SAMD21)
|
|
|
|
PM->APBCMASK.bit.TC3_ = 1; // Enable TC3 clock
|
|
PM->APBCMASK.bit.TC4_ = 1; // Enable TC4 clock
|
|
// Select multiplexer generic clock source and enable.
|
|
GCLK->CLKCTRL.reg = GCLK_CLKCTRL_CLKEN | GCLK_CLKCTRL_GEN_GCLK3 | GCLK_CLKCTRL_ID_TC4_TC5;
|
|
// Wait while it updates synchronously.
|
|
while (GCLK->STATUS.bit.SYNCBUSY) {
|
|
}
|
|
|
|
// configure the timer
|
|
TC4->COUNT32.CTRLA.bit.MODE = TC_CTRLA_MODE_COUNT32_Val;
|
|
TC4->COUNT32.CTRLA.bit.RUNSTDBY = 1;
|
|
TC4->COUNT32.CTRLA.bit.ENABLE = 1;
|
|
while (TC4->COUNT32.STATUS.bit.SYNCBUSY) {
|
|
}
|
|
TC4->COUNT32.READREQ.reg = TC_READREQ_RREQ | TC_READREQ_RCONT | 0x10;
|
|
while (TC4->COUNT32.STATUS.bit.SYNCBUSY) {
|
|
}
|
|
// Enable the IRQ
|
|
TC4->COUNT32.INTENSET.reg = TC_INTENSET_OVF;
|
|
NVIC_EnableIRQ(TC4_IRQn);
|
|
|
|
#elif defined(MCU_SAMD51)
|
|
|
|
MCLK->APBAMASK.bit.TC0_ = 1; // Enable TC0 clock
|
|
MCLK->APBAMASK.bit.TC1_ = 1; // Enable TC1 clock
|
|
// Peripheral channel 9 is driven by GCLK3, 8 MHz.
|
|
GCLK->PCHCTRL[TC0_GCLK_ID].reg = GCLK_PCHCTRL_GEN_GCLK3 | GCLK_PCHCTRL_CHEN;
|
|
while (GCLK->PCHCTRL[TC0_GCLK_ID].bit.CHEN == 0) {
|
|
}
|
|
|
|
// configure the timer
|
|
TC0->COUNT32.CTRLA.bit.PRESCALER = 0;
|
|
TC0->COUNT32.CTRLA.bit.MODE = TC_CTRLA_MODE_COUNT32_Val;
|
|
TC0->COUNT32.CTRLA.bit.RUNSTDBY = 1;
|
|
TC0->COUNT32.CTRLA.bit.ENABLE = 1;
|
|
while (TC0->COUNT32.SYNCBUSY.bit.ENABLE) {
|
|
}
|
|
|
|
// Enable the IRQ
|
|
TC0->COUNT32.INTENSET.reg = TC_INTENSET_OVF;
|
|
NVIC_EnableIRQ(TC0_IRQn);
|
|
#endif
|
|
}
|
|
|
|
void samd_init(void) {
|
|
init_clocks(get_cpu_freq());
|
|
init_us_counter();
|
|
usb_init();
|
|
check_usb_recovery_mode();
|
|
#if defined(MCU_SAMD51)
|
|
mp_hal_ticks_cpu_enable();
|
|
#endif
|
|
#if MICROPY_PY_MACHINE_RTC
|
|
machine_rtc_start(false);
|
|
#endif
|
|
}
|
|
|
|
#if MICROPY_PY_MACHINE_I2C || MICROPY_PY_MACHINE_SPI || MICROPY_PY_MACHINE_UART
|
|
|
|
Sercom *sercom_instance[] = SERCOM_INSTS;
|
|
MP_REGISTER_ROOT_POINTER(void *sercom_table[SERCOM_INST_NUM]);
|
|
|
|
// Common Sercom functions used by all Serial devices
|
|
void sercom_enable(Sercom *uart, int state) {
|
|
uart->USART.CTRLA.bit.ENABLE = state; // Set the state on/off
|
|
// Wait for the Registers to update.
|
|
while (uart->USART.SYNCBUSY.bit.ENABLE) {
|
|
}
|
|
}
|
|
|
|
void sercom_deinit_all(void) {
|
|
for (int i = 0; i < SERCOM_INST_NUM; i++) {
|
|
Sercom *uart = sercom_instance[i];
|
|
uart->USART.INTENCLR.reg = 0xff;
|
|
sercom_register_irq(i, NULL);
|
|
sercom_enable(uart, 0);
|
|
MP_STATE_PORT(sercom_table[i]) = NULL;
|
|
}
|
|
}
|
|
|
|
#endif
|
|
|
|
void samd_get_unique_id(samd_unique_id_t *id) {
|
|
// Atmel SAM D21E / SAM D21G / SAM D21J
|
|
// SMART ARM-Based Microcontroller
|
|
// DATASHEET
|
|
// 9.6 (SAMD51) or 9.3.3 (or 10.3.3 depending on which manual)(SAMD21) Serial Number
|
|
//
|
|
// EXAMPLE (SAMD21)
|
|
// ----------------
|
|
// OpenOCD:
|
|
// Word0:
|
|
// > at91samd21g18.cpu mdw 0x0080A00C 1
|
|
// 0x0080a00c: 6e27f15f
|
|
// Words 1-3:
|
|
// > at91samd21g18.cpu mdw 0x0080A040 3
|
|
// 0x0080a040: 50534b54 332e3120 ff091645
|
|
//
|
|
// MicroPython (this code and same order as shown in Arduino IDE)
|
|
// >>> binascii.hexlify(machine.unique_id())
|
|
// b'6e27f15f50534b54332e3120ff091645'
|
|
|
|
#if defined(MCU_SAMD21)
|
|
uint32_t *id_addresses[4] = {(uint32_t *)0x0080A00C, (uint32_t *)0x0080A040,
|
|
(uint32_t *)0x0080A044, (uint32_t *)0x0080A048};
|
|
#elif defined(MCU_SAMD51)
|
|
uint32_t *id_addresses[4] = {(uint32_t *)0x008061FC, (uint32_t *)0x00806010,
|
|
(uint32_t *)0x00806014, (uint32_t *)0x00806018};
|
|
#endif
|
|
|
|
for (int i = 0; i < 4; i++) {
|
|
for (int k = 0; k < 4; k++) {
|
|
// 'Reverse' the read bytes into a 32 bit word (Consistent with Arduino)
|
|
id->bytes[4 * i + k] = (*(id_addresses[i]) >> (24 - k * 8)) & 0xff;
|
|
}
|
|
}
|
|
}
|