micropython/ports/stm32/boards
Chris Fiege 6e39f2cc1e stm32/boards: Add OLIMEX H407 board definition.
This change adds the OLIMEX H407 support to the STM32 port.  The H407
(https://www.olimex.com/Products/ARM/ST/STM32-H407/) is simliar to the
already existing E407
(https://www.olimex.com/Products/ARM/ST/STM32-E407) but does not support
Ethernet and has a full-size USB-A port instead of a Mini-USB socket.

Both boards use the STM32F407ZGT6 CPU.

This port is basically a copy of the E407 but with changed pinmux:
* Removed Ethernet pin definition
* Removed UART1 (pins are used for other functions)
* Removed UART3 flow control pins (pins are used for other functions)
* Removed SD-Card detect pin (since it is not connected on the H407)

A REPL on UART3 is connected to the U3BOOT-header, a 3-pin header with RX,
TX and GND that is intended for the serial terminal.

Tested:
* Micro-SD Card is detected when inserted on RESET
* REPL on UART3 works
* Serial port on the mini USB socket

Signed-off-by: Chris Fiege <cfi@pengutronix.de>
2021-09-19 16:58:58 +10:00
..
ADAFRUIT_F405_EXPRESS all: Replace busses with buses. 2021-05-20 23:22:03 +10:00
B_L072Z_LRWAN1 stm32: Disable computed goto on constrained boards. 2021-08-20 20:18:52 +10:00
B_L475E_IOT01A all: Replace busses with buses. 2021-05-20 23:22:03 +10:00
CERB40 all: Replace busses with buses. 2021-05-20 23:22:03 +10:00
ESPRUINO_PICO all: Replace busses with buses. 2021-05-20 23:22:03 +10:00
HYDRABUS all: Replace busses with buses. 2021-05-20 23:22:03 +10:00
LEGO_HUB_NO6 stm32/boards/LEGO_HUB_NO6: Remove user paths from cc2564 init file. 2021-09-10 16:00:21 +10:00
LIMIFROG all: Replace busses with buses. 2021-05-20 23:22:03 +10:00
MIKROE_CLICKER2_STM32 stm32/boards: Remove trailing spaces, and add newline at end of file. 2021-09-10 16:09:03 +10:00
NADHAT_PYBF405 stm32/boards: Add NADHAT_PYB405 board. 2019-10-18 11:41:22 +11:00
NETDUINO_PLUS_2 all: Replace busses with buses. 2021-05-20 23:22:03 +10:00
NUCLEO_F091RC stm32: Disable computed goto on constrained boards. 2021-08-20 20:18:52 +10:00
NUCLEO_F401RE all: Replace busses with buses. 2021-05-20 23:22:03 +10:00
NUCLEO_F411RE all: Replace busses with buses. 2021-05-20 23:22:03 +10:00
NUCLEO_F412ZG stm32/boards: Remove trailing spaces, and add newline at end of file. 2021-09-10 16:09:03 +10:00
NUCLEO_F413ZH all: Replace busses with buses. 2021-05-20 23:22:03 +10:00
NUCLEO_F429ZI all: Replace busses with buses. 2021-05-20 23:22:03 +10:00
NUCLEO_F439ZI stm32/boards/NUCLEO_F439ZI: Add board definition for NUCLEO_F439ZI. 2021-07-27 16:46:10 +10:00
NUCLEO_F446RE stm32/boards/NUCLEO_F446RE: Enable CAN bus support. 2021-07-23 00:06:13 +10:00
NUCLEO_F722ZE stm32/boards/NUCLEO_F722ZE: Add definition files for new board. 2019-07-25 16:31:36 +10:00
NUCLEO_F746ZG all: Replace busses with buses. 2021-05-20 23:22:03 +10:00
NUCLEO_F767ZI all: Replace busses with buses. 2021-05-20 23:22:03 +10:00
NUCLEO_H743ZI stm32/boards/NUCLEO_H743ZI2: Add modified version of NUCLEO_H743ZI. 2021-08-10 23:38:05 +10:00
NUCLEO_H743ZI2 stm32/boards/NUCLEO_H743ZI2: Add modified version of NUCLEO_H743ZI. 2021-08-10 23:38:05 +10:00
NUCLEO_L073RZ stm32: Disable computed goto on constrained boards. 2021-08-20 20:18:52 +10:00
NUCLEO_L432KC stm32/usbd_cdc_interface: Rename USBD_CDC_xx opts to MICROPY_HW_USB_xx. 2021-08-07 23:13:58 +10:00
NUCLEO_L452RE all: Replace busses with buses. 2021-05-20 23:22:03 +10:00
NUCLEO_L476RG all: Replace busses with buses. 2021-05-20 23:22:03 +10:00
NUCLEO_WB55 stm32/usbd_cdc_interface: Rename USBD_CDC_xx opts to MICROPY_HW_USB_xx. 2021-08-07 23:13:58 +10:00
OLIMEX_E407 stm32/boards: Remove trailing spaces, and add newline at end of file. 2021-09-10 16:09:03 +10:00
OLIMEX_H407 stm32/boards: Add OLIMEX H407 board definition. 2021-09-19 16:58:58 +10:00
PYBD_SF2 esp32,stm32: Add new machine.I2S class for I2S protocol support. 2021-07-05 23:42:25 +10:00
PYBD_SF3 stm32: Include .ARM section in firmware for C++ exception handling. 2021-04-06 12:11:15 +10:00
PYBD_SF6 all: Replace busses with buses. 2021-05-20 23:22:03 +10:00
PYBLITEV10 all: Replace busses with buses. 2021-05-20 23:22:03 +10:00
PYBV3 all: Replace busses with buses. 2021-05-20 23:22:03 +10:00
PYBV4 all: Replace busses with buses. 2021-05-20 23:22:03 +10:00
PYBV10 esp32,stm32: Add new machine.I2S class for I2S protocol support. 2021-07-05 23:42:25 +10:00
PYBV11 esp32,stm32: Add new machine.I2S class for I2S protocol support. 2021-07-05 23:42:25 +10:00
SPARKFUN_MICROMOD_STM32 stm32/boards: Add support for SparkFun STM32 MicroMod Processor board. 2021-07-23 22:03:16 +10:00
STM32F4DISC stm32/boards: Remove trailing spaces, and add newline at end of file. 2021-09-10 16:09:03 +10:00
STM32F7DISC all: Replace busses with buses. 2021-05-20 23:22:03 +10:00
STM32F411DISC all: Replace busses with buses. 2021-05-20 23:22:03 +10:00
STM32F429DISC stm32/boards/STM32F429DISC: Set correct UART2 pins and add UART3/6. 2021-07-26 14:38:39 +10:00
STM32F439 all: Replace busses with buses. 2021-05-20 23:22:03 +10:00
STM32F769DISC stm32/boards: Remove trailing spaces, and add newline at end of file. 2021-09-10 16:09:03 +10:00
STM32H7B3I_DK stm32: Add support for H7A3(Q)/H7B3(Q), and STM32H73B3I_DK board defn. 2021-09-16 12:29:28 +10:00
STM32L476DISC all: Replace busses with buses. 2021-05-20 23:22:03 +10:00
STM32L496GDISC all: Replace busses with buses. 2021-05-20 23:22:03 +10:00
USBDONGLE_WB55 stm32/usbd_cdc_interface: Rename USBD_CDC_xx opts to MICROPY_HW_USB_xx. 2021-08-07 23:13:58 +10:00
VCC_GND_F407VE stm32/boards: Enable MICROPY_HW_SPIFLASH_ENABLE_CACHE on VCC_GND boards. 2021-06-10 22:48:17 +10:00
VCC_GND_F407ZG stm32/boards: Enable MICROPY_HW_SPIFLASH_ENABLE_CACHE on VCC_GND boards. 2021-06-10 22:48:17 +10:00
VCC_GND_H743VI stm32/boards/VCC_GND_H743VI: Add board definition for VCC_GND_H743VI. 2021-09-10 15:49:26 +10:00
common_basic.ld stm32/boards: Factor out common data/bss/heap/stack linker sections. 2020-10-29 23:31:59 +11:00
common_bl.ld stm32/boards: Factor out common data/bss/heap/stack linker sections. 2020-10-29 23:31:59 +11:00
common_blifs.ld stm32/boards: Factor out common data/bss/heap/stack linker sections. 2020-10-29 23:31:59 +11:00
common_bss_heap_stack.ld stm32/boards: Factor out common data/bss/heap/stack linker sections. 2020-10-29 23:31:59 +11:00
common_extratext_data_in_flash.ld stm32: Support C++ code and user C modules written in C++. 2020-10-29 23:35:36 +11:00
common_extratext_data_in_flash_app.ld stm32: Support C++ code and user C modules written in C++. 2020-10-29 23:35:36 +11:00
common_extratext_data_in_flash_text.ld stm32: Support C++ code and user C modules written in C++. 2020-10-29 23:35:36 +11:00
common_ifs.ld stm32/boards: Factor out common data/bss/heap/stack linker sections. 2020-10-29 23:31:59 +11:00
make-pins.py stm32/boards/make-pins.py: Allow empty lines and comments in pins.csv. 2021-09-16 12:53:16 +10:00
manifest.py stm32: Enable and freeze uasyncio. 2020-03-26 01:25:45 +11:00
openocd_stm32f4.cfg stm32/boards: Allow OpenOCD stm_flash procedure to accept single FW img. 2018-12-13 13:43:10 +11:00
openocd_stm32f7.cfg stm32/boards: Allow OpenOCD stm_flash procedure to accept single FW img. 2018-12-13 13:43:10 +11:00
openocd_stm32l4.cfg stm32/boards: Allow OpenOCD stm_flash procedure to accept single FW img. 2018-12-13 13:43:10 +11:00
pllvalues.py stm32/boards/pllvalues.py: Support wider range of PLL values for F413. 2021-04-20 23:33:33 +10:00
stm32f0xx_hal_conf_base.h stm32/uart: Add uart_set_baudrate function. 2021-02-14 18:30:49 +11:00
stm32f4xx_hal_conf_base.h stm32/boards: Change default LSI_VALUE to 32000 for F4 MCUs. 2021-05-04 16:53:40 +10:00
stm32f4xx_prefix.c stm32/pin: In pin AF object, remove union of periph ptr types. 2018-04-11 16:14:58 +10:00
stm32f7xx_hal_conf_base.h stm32/uart: Add uart_set_baudrate function. 2021-02-14 18:30:49 +11:00
stm32f091_af.csv stm32/boards/stm32f091_af.csv: Split labels that are multiple funcs. 2018-06-18 13:05:24 +10:00
stm32f091xc.ld stm32: Enter bootloader via a system reset. 2019-06-25 14:15:49 +10:00
stm32f401_af.csv stm32/boards: Split combined alt-func labels and fix some other errors. 2018-05-29 21:37:49 +10:00
stm32f401xd.ld stm32: Enter bootloader via a system reset. 2019-06-25 14:15:49 +10:00
stm32f401xe.ld stm32: Enter bootloader via a system reset. 2019-06-25 14:15:49 +10:00
stm32f405.ld stm32: Enter bootloader via a system reset. 2019-06-25 14:15:49 +10:00
stm32f405_af.csv stm32/boards/stm32f405_af.csv: Fix typo in ETH_RMII_REF_CLK on PA1. 2019-11-11 12:02:14 +11:00
stm32f411.ld stm32: Enter bootloader via a system reset. 2019-06-25 14:15:49 +10:00
stm32f411_af.csv stm32/boards: Split combined alt-func labels and fix some other errors. 2018-05-29 21:37:49 +10:00
stm32f412_af.csv stm32: Add support for F412 MCUs. 2020-05-15 10:08:30 +10:00
stm32f412zx.ld stm32: Add support for F412 MCUs. 2020-05-15 10:08:30 +10:00
stm32f413_af.csv stm32: Add support for F413 MCUs. 2019-05-02 16:26:53 +10:00
stm32f413xg.ld stm32: Enter bootloader via a system reset. 2019-06-25 14:15:49 +10:00
stm32f413xh.ld stm32: Enter bootloader via a system reset. 2019-06-25 14:15:49 +10:00
stm32f429.ld stm32: Enter bootloader via a system reset. 2019-06-25 14:15:49 +10:00
stm32f429_af.csv stm32/boards/stm32f429_af.csv: Fix typos in UART defs Tx->TX and Rx->RX. 2019-01-31 01:02:42 +11:00
stm32f439.ld stm32: Enter bootloader via a system reset. 2019-06-25 14:15:49 +10:00
stm32f439_af.csv stm32: Enable UART7/8 on F4 series that have these peripherals. 2018-05-16 11:55:07 +10:00
stm32f722.ld stm32/boards/stm32f722.ld: Provide memory regions for internal FS. 2019-07-25 16:31:36 +10:00
stm32f722_af.csv stm32/boards: Add .ld and af.csv files for STM32F722. 2018-06-22 15:39:10 +10:00
stm32f746.ld stm32: Enter bootloader via a system reset. 2019-06-25 14:15:49 +10:00
stm32f746_af.csv stm32/boards/stm32f746_af.csv: Add ADC alt functions to correct pins. 2020-01-30 16:31:11 +11:00
stm32f767.ld stm32/boards/NUCLEO_F767ZI: Update pins, peripherals and total flash. 2019-12-19 11:43:19 +11:00
stm32f767_af.csv stm32/boards/stm32f767_af.csv: Add ADC column to pin capability list. 2018-03-07 18:40:06 +11:00
stm32f769.ld stm32: Enter bootloader via a system reset. 2019-06-25 14:15:49 +10:00
stm32h7b3.ld stm32: Add support for H7A3(Q)/H7B3(Q), and STM32H73B3I_DK board defn. 2021-09-16 12:29:28 +10:00
stm32h7b3_af.csv stm32: Add support for H7A3(Q)/H7B3(Q), and STM32H73B3I_DK board defn. 2021-09-16 12:29:28 +10:00
stm32h7xx_hal_conf_base.h stm32/uart: Fix LPUART1 baudrate set/get. 2021-07-26 13:53:50 +10:00
stm32h743.ld stm32/boards: Remove trailing spaces, and add newline at end of file. 2021-09-10 16:09:03 +10:00
stm32h743_af.csv stm32/boards/stm32h743_af.csv: Add ADC entries to pin capability table. 2019-02-06 13:34:53 +11:00
stm32l0xx_hal_conf_base.h stm32/uart: Fix LPUART1 baudrate set/get. 2021-07-26 13:53:50 +10:00
stm32l4xx_hal_conf_base.h stm32/uart: Fix LPUART1 baudrate set/get. 2021-07-26 13:53:50 +10:00
stm32l072_af.csv stm32/boards: Split UARTx_RTS_DE into UARTx_RTS/UARTx_DE in pin defs. 2021-04-13 23:58:20 +10:00
stm32l072xz.ld stm32/boards: Add MCU support files for STM32L072. 2019-07-05 17:26:03 +10:00
stm32l432.ld stm32/boards/NUCLEO_L432KC: Fix FS size and enable LFS1 filesystem. 2021-05-27 12:18:41 +10:00
stm32l432_af.csv stm32/boards: Remove trailing spaces, and add newline at end of file. 2021-09-10 16:09:03 +10:00
stm32l452_af.csv stm32/boards: Split UARTx_RTS_DE into UARTx_RTS/UARTx_DE in pin defs. 2021-04-13 23:58:20 +10:00
stm32l452xe.ld stm32: Add support for STM32L452 MCUs. 2019-07-08 16:50:19 +10:00
stm32l476_af.csv stm32/boards: Split UARTx_RTS_DE into UARTx_RTS/UARTx_DE in pin defs. 2021-04-13 23:58:20 +10:00
stm32l476xe.ld stm32/boards: Optimise flash and RAM allocation for L4 boards. 2019-07-01 16:57:20 +10:00
stm32l476xg.ld stm32/boards: Optimise flash and RAM allocation for L4 boards. 2019-07-01 16:57:20 +10:00
stm32l496_af.csv stm32/boards: Split combined alt-func labels and fix some other errors. 2018-05-29 21:37:49 +10:00
stm32l496xg.ld stm32/boards: Optimise flash and RAM allocation for L4 boards. 2019-07-01 16:57:20 +10:00
stm32wb55_af.csv stm32/boards: Split UARTx_RTS_DE into UARTx_RTS/UARTx_DE in pin defs. 2021-04-13 23:58:20 +10:00
stm32wb55xg.ld stm32/rfcore: Update rfcore.c to match how ST examples work. 2020-09-08 23:53:02 +10:00
stm32wbxx_hal_conf_base.h stm32/uart: Fix LPUART1 baudrate set/get. 2021-07-26 13:53:50 +10:00