235 lines
9.2 KiB
ReStructuredText
235 lines
9.2 KiB
ReStructuredText
.. _pyb.Timer:
|
|
|
|
class Timer -- control internal timers
|
|
======================================
|
|
|
|
Timers can be used for a great variety of tasks. At the moment, only
|
|
the simplest case is implemented: that of calling a function periodically.
|
|
|
|
Each timer consists of a counter that counts up at a certain rate. The rate
|
|
at which it counts is the peripheral clock frequency (in Hz) divided by the
|
|
timer prescaler. When the counter reaches the timer period it triggers an
|
|
event, and the counter resets back to zero. By using the callback method,
|
|
the timer event can call a Python function.
|
|
|
|
Example usage to toggle an LED at a fixed frequency::
|
|
|
|
tim = pyb.Timer(4) # create a timer object using timer 4
|
|
tim.init(freq=2) # trigger at 2Hz
|
|
tim.callback(lambda t:pyb.LED(1).toggle())
|
|
|
|
Further examples::
|
|
|
|
tim = pyb.Timer(4, freq=100) # freq in Hz
|
|
tim = pyb.Timer(4, prescaler=0, period=99)
|
|
tim.counter() # get counter (can also set)
|
|
tim.prescaler(2) # set prescaler (can also get)
|
|
tim.period(199) # set period (can also get)
|
|
tim.callback(lambda t: ...) # set callback for update interrupt (t=tim instance)
|
|
tim.callback(None) # clear callback
|
|
|
|
*Note:* Timer 3 is reserved for internal use. Timer 5 controls
|
|
the servo driver, and Timer 6 is used for timed ADC/DAC reading/writing.
|
|
It is recommended to use the other timers in your programs.
|
|
|
|
|
|
Constructors
|
|
------------
|
|
|
|
.. class:: pyb.Timer(id, ...)
|
|
|
|
Construct a new timer object of the given id. If additional
|
|
arguments are given, then the timer is initialised by ``init(...)``.
|
|
``id`` can be 1 to 14, excluding 3.
|
|
|
|
|
|
Methods
|
|
-------
|
|
|
|
.. method:: timer.callback(fun)
|
|
|
|
Set the function to be called when the timer triggers.
|
|
``fun`` is passed 1 argument, the timer object.
|
|
If ``fun`` is ``None`` then the callback will be disabled.
|
|
|
|
.. method:: timer.channel(channel, mode, ...)
|
|
|
|
If only a channel number is passed, then a previously initialized channel
|
|
object is returned (or ``None`` if there is no previous channel).
|
|
|
|
Othwerwise, a TimerChannel object is initialized and returned.
|
|
|
|
Each channel can be configured to perform pwm, output compare, or
|
|
input capture. All channels share the same underlying timer, which means
|
|
that they share the same timer clock.
|
|
|
|
Keyword arguments:
|
|
|
|
- ``mode`` can be one of:
|
|
|
|
- ``Timer.PWM`` --- configure the timer in PWM mode (active high).
|
|
- ``Timer.PWM_INVERTED`` --- configure the timer in PWM mode (active low).
|
|
- ``Timer.OC_TIMING`` --- indicates that no pin is driven.
|
|
- ``Timer.OC_ACTIVE`` --- the pin will be made active when a compare match occurs (active is determined by polarity)
|
|
- ``Timer.OC_INACTIVE`` --- the pin will be made inactive when a compare match occurs.
|
|
- ``Timer.OC_TOGGLE`` --- the pin will be toggled when an compare match occurs.
|
|
- ``Timer.OC_FORCED_ACTIVE`` --- the pin is forced active (compare match is ignored).
|
|
- ``Timer.OC_FORCED_INACTIVE`` --- the pin is forced inactive (compare match is ignored).
|
|
- ``Timer.IC`` --- configure the timer in Input Capture mode.
|
|
|
|
- ``callback`` - as per TimerChannel.callback()
|
|
|
|
- ``pin`` None (the default) or a Pin object. If specified (and not None)
|
|
this will cause the alternate function of the the indicated pin
|
|
to be configured for this timer channel. An error will be raised if
|
|
the pin doesn't support any alternate functions for this timer channel.
|
|
|
|
Keyword arguments for Timer.PWM modes:
|
|
|
|
- ``pulse_width`` - determines the initial pulse width value to use.
|
|
- ``pulse_width_percent`` - determines the initial pulse width percentage to use.
|
|
|
|
Keyword arguments for Timer.OC modes:
|
|
|
|
- ``compare`` - determines the initial value of the compare register.
|
|
|
|
- ``polarity`` can be one of:
|
|
- ``Timer.HIGH`` - output is active high
|
|
- ``Timer.LOW`` - output is acive low
|
|
|
|
Optional keyword arguments for Timer.IC modes:
|
|
|
|
- ``polarity`` can be one of:
|
|
- ``Timer.RISING`` - captures on rising edge.
|
|
- ``Timer.FALLING`` - captures on falling edge.
|
|
- ``Timer.BOTH`` - captures on both edges.
|
|
|
|
Note that capture only works on the primary channel, and not on the
|
|
complimentary channels.
|
|
|
|
PWM Example::
|
|
|
|
timer = pyb.Timer(2, freq=1000)
|
|
ch2 = timer.channel(2, pyb.Timer.PWM, pin=pyb.Pin.board.X2, pulse_width=210000)
|
|
ch3 = timer.channel(3, pyb.Timer.PWM, pin=pyb.Pin.board.X3, pulse_width=420000)
|
|
|
|
.. method:: timer.counter([value])
|
|
|
|
Get or set the timer counter.
|
|
|
|
.. method:: timer.deinit()
|
|
|
|
Deinitialises the timer.
|
|
|
|
Disables the callback (and the associated irq).
|
|
Disables any channel callbacks (and the associated irq).
|
|
Stops the timer, and disables the timer peripheral.
|
|
|
|
.. method:: timer.freq([value])
|
|
|
|
Get or set the frequency for the timer (changes prescaler and period if set).
|
|
|
|
.. method:: timer.init(\*, freq, prescaler, period)
|
|
|
|
Initialise the timer. Initialisation must be either by frequency (in Hz)
|
|
or by prescaler and period::
|
|
|
|
tim.init(freq=100) # set the timer to trigger at 100Hz
|
|
tim.init(prescaler=83, period=999) # set the prescaler and period directly
|
|
|
|
Keyword arguments:
|
|
|
|
- ``freq`` --- specifies the periodic frequency of the timer. You migh also
|
|
view this as the frequency with which the timer goes through one complete cycle.
|
|
|
|
- ``prescaler`` [0-0xffff] - specifies the value to be loaded into the
|
|
timer's Prescaler Register (PSC). The timer clock source is divided by
|
|
(``prescaler + 1``) to arrive at the timer clock. Timers 2-7 and 12-14
|
|
have a clock source of 84 MHz (pyb.freq()[2] \* 2), and Timers 1, and 8-11
|
|
have a clock source of 168 MHz (pyb.freq()[3] \* 2).
|
|
|
|
- ``period`` [0-0xffff] for timers 1, 3, 4, and 6-15. [0-0x3fffffff] for timers 2 & 5.
|
|
Specifies the value to be loaded into the timer's AutoReload
|
|
Register (ARR). This determines the period of the timer (i.e. when the
|
|
counter cycles). The timer counter will roll-over after ``period + 1``
|
|
timer clock cycles.
|
|
|
|
- ``mode`` can be one of:
|
|
|
|
- ``Timer.UP`` - configures the timer to count from 0 to ARR (default)
|
|
- ``Timer.DOWN`` - configures the timer to count from ARR down to 0.
|
|
- ``Timer.CENTER`` - confgures the timer to count from 0 to ARR and
|
|
then back down to 0.
|
|
|
|
- ``div`` can be one of 1, 2, or 4. Divides the timer clock to determine
|
|
the sampling clock used by the digital filters.
|
|
|
|
- ``callback`` - as per Timer.callback()
|
|
|
|
- ``deadtime`` - specifies the amount of "dead" or inactive time between
|
|
transitions on complimentary channels (both channels will be inactive)
|
|
for this time). ``deadtime`` may be an integer between 0 and 1008, with
|
|
the following restrictions: 0-128 in steps of 1. 128-256 in steps of
|
|
2, 256-512 in steps of 8, and 512-1008 in steps of 16. ``deadime``
|
|
measures ticks of ``source_freq`` divided by ``div`` clock ticks.
|
|
``deadtime`` is only available on timers 1 and 8.
|
|
|
|
You must either specify freq or both of period and prescaler.
|
|
|
|
.. method:: timer.period([value])
|
|
|
|
Get or set the period of the timer.
|
|
|
|
.. method:: timer.prescaler([value])
|
|
|
|
Get or set the prescaler for the timer.
|
|
|
|
.. method:: timer.source_freq()
|
|
|
|
Get the frequency of the source of the timer.
|
|
|
|
class TimerChannel --- setup a channel for a timer
|
|
==================================================
|
|
|
|
Timer channels are used to generate/capture a signal using a timer.
|
|
|
|
TimerChannel objects are created using the Timer.channel() method.
|
|
|
|
Methods
|
|
-------
|
|
|
|
.. method:: timerchannel.callback(fun)
|
|
|
|
Set the function to be called when the timer channel triggers.
|
|
``fun`` is passed 1 argument, the timer object.
|
|
If ``fun`` is ``None`` then the callback will be disabled.
|
|
|
|
.. method:: timerchannel.capture([value])
|
|
|
|
Get or set the capture value associated with a channel.
|
|
capture, compare, and pulse_width are all aliases for the same function.
|
|
capture is the logical name to use when the channel is in input capture mode.
|
|
|
|
.. method:: timerchannel.compare([value])
|
|
|
|
Get or set the compare value associated with a channel.
|
|
capture, compare, and pulse_width are all aliases for the same function.
|
|
compare is the logical name to use when the channel is in output compare mode.
|
|
|
|
.. method:: timerchannel.pulse_width([value])
|
|
|
|
Get or set the pulse width value associated with a channel.
|
|
capture, compare, and pulse_width are all aliases for the same function.
|
|
pulse_width is the logical name to use when the channel is in PWM mode.
|
|
|
|
In edge aligned mode, a pulse_width of ``period + 1`` corresponds to a duty cycle of 100%
|
|
In center aligned mode, a pulse width of ``period`` corresponds to a duty cycle of 100%
|
|
|
|
.. method:: timerchannel.pulse_width_percent([value])
|
|
|
|
Get or set the pulse width percentage associated with a channel. The value
|
|
is a number between 0 and 100 and sets the percentage of the timer period
|
|
for which the pulse is active. The value can be an integer or
|
|
floating-point number for more accuracy. For example, a value of 25 gives
|
|
a duty cycle of 25%.
|