397 lines
14 KiB
C
397 lines
14 KiB
C
/**
|
|
******************************************************************************
|
|
* @file stm32f7xx_hal_flash.h
|
|
* @author MCD Application Team
|
|
* @version V1.0.1
|
|
* @date 25-June-2015
|
|
* @brief Header file of FLASH HAL module.
|
|
******************************************************************************
|
|
* @attention
|
|
*
|
|
* <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without modification,
|
|
* are permitted provided that the following conditions are met:
|
|
* 1. Redistributions of source code must retain the above copyright notice,
|
|
* this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright notice,
|
|
* this list of conditions and the following disclaimer in the documentation
|
|
* and/or other materials provided with the distribution.
|
|
* 3. Neither the name of STMicroelectronics nor the names of its contributors
|
|
* may be used to endorse or promote products derived from this software
|
|
* without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
|
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
|
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
|
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
|
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
|
|
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
|
|
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
|
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
*
|
|
******************************************************************************
|
|
*/
|
|
|
|
/* Define to prevent recursive inclusion -------------------------------------*/
|
|
#ifndef __STM32F7xx_HAL_FLASH_H
|
|
#define __STM32F7xx_HAL_FLASH_H
|
|
|
|
#ifdef __cplusplus
|
|
extern "C" {
|
|
#endif
|
|
|
|
/* Includes ------------------------------------------------------------------*/
|
|
#include "stm32f7xx_hal_def.h"
|
|
|
|
/** @addtogroup STM32F7xx_HAL_Driver
|
|
* @{
|
|
*/
|
|
|
|
/** @addtogroup FLASH
|
|
* @{
|
|
*/
|
|
|
|
/* Exported types ------------------------------------------------------------*/
|
|
/** @defgroup FLASH_Exported_Types FLASH Exported Types
|
|
* @{
|
|
*/
|
|
|
|
/**
|
|
* @brief FLASH Procedure structure definition
|
|
*/
|
|
typedef enum
|
|
{
|
|
FLASH_PROC_NONE = 0,
|
|
FLASH_PROC_SECTERASE,
|
|
FLASH_PROC_MASSERASE,
|
|
FLASH_PROC_PROGRAM
|
|
} FLASH_ProcedureTypeDef;
|
|
|
|
|
|
/**
|
|
* @brief FLASH handle Structure definition
|
|
*/
|
|
typedef struct
|
|
{
|
|
__IO FLASH_ProcedureTypeDef ProcedureOnGoing; /* Internal variable to indicate which procedure is ongoing or not in IT context */
|
|
|
|
__IO uint32_t NbSectorsToErase; /* Internal variable to save the remaining sectors to erase in IT context */
|
|
|
|
__IO uint8_t VoltageForErase; /* Internal variable to provide voltage range selected by user in IT context */
|
|
|
|
__IO uint32_t Sector; /* Internal variable to define the current sector which is erasing */
|
|
|
|
__IO uint32_t Address; /* Internal variable to save address selected for program */
|
|
|
|
HAL_LockTypeDef Lock; /* FLASH locking object */
|
|
|
|
__IO uint32_t ErrorCode; /* FLASH error code */
|
|
|
|
}FLASH_ProcessTypeDef;
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/* Exported constants --------------------------------------------------------*/
|
|
/** @defgroup FLASH_Exported_Constants FLASH Exported Constants
|
|
* @{
|
|
*/
|
|
|
|
/** @defgroup FLASH_Error_Code FLASH Error Code
|
|
* @brief FLASH Error Code
|
|
* @{
|
|
*/
|
|
#define HAL_FLASH_ERROR_NONE ((uint32_t)0x00000000) /*!< No error */
|
|
#define HAL_FLASH_ERROR_ERS ((uint32_t)0x00000002) /*!< Programming Sequence error */
|
|
#define HAL_FLASH_ERROR_PGP ((uint32_t)0x00000004) /*!< Programming Parallelism error */
|
|
#define HAL_FLASH_ERROR_PGA ((uint32_t)0x00000008) /*!< Programming Alignment error */
|
|
#define HAL_FLASH_ERROR_WRP ((uint32_t)0x00000010) /*!< Write protection error */
|
|
#define HAL_FLASH_ERROR_OPERATION ((uint32_t)0x00000020) /*!< Operation Error */
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup FLASH_Type_Program FLASH Type Program
|
|
* @{
|
|
*/
|
|
#define FLASH_TYPEPROGRAM_BYTE ((uint32_t)0x00) /*!< Program byte (8-bit) at a specified address */
|
|
#define FLASH_TYPEPROGRAM_HALFWORD ((uint32_t)0x01) /*!< Program a half-word (16-bit) at a specified address */
|
|
#define FLASH_TYPEPROGRAM_WORD ((uint32_t)0x02) /*!< Program a word (32-bit) at a specified address */
|
|
#define FLASH_TYPEPROGRAM_DOUBLEWORD ((uint32_t)0x03) /*!< Program a double word (64-bit) at a specified address */
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup FLASH_Flag_definition FLASH Flag definition
|
|
* @brief Flag definition
|
|
* @{
|
|
*/
|
|
#define FLASH_FLAG_EOP FLASH_SR_EOP /*!< FLASH End of Operation flag */
|
|
#define FLASH_FLAG_OPERR FLASH_SR_OPERR /*!< FLASH operation Error flag */
|
|
#define FLASH_FLAG_WRPERR FLASH_SR_WRPERR /*!< FLASH Write protected error flag */
|
|
#define FLASH_FLAG_PGAERR FLASH_SR_PGAERR /*!< FLASH Programming Alignment error flag */
|
|
#define FLASH_FLAG_PGPERR FLASH_SR_PGPERR /*!< FLASH Programming Parallelism error flag */
|
|
#define FLASH_FLAG_ERSERR FLASH_SR_ERSERR /*!< FLASH Erasing Sequence error flag */
|
|
#define FLASH_FLAG_BSY FLASH_SR_BSY /*!< FLASH Busy flag */
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup FLASH_Interrupt_definition FLASH Interrupt definition
|
|
* @brief FLASH Interrupt definition
|
|
* @{
|
|
*/
|
|
#define FLASH_IT_EOP FLASH_CR_EOPIE /*!< End of FLASH Operation Interrupt source */
|
|
#define FLASH_IT_ERR ((uint32_t)0x02000000) /*!< Error Interrupt source */
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup FLASH_Program_Parallelism FLASH Program Parallelism
|
|
* @{
|
|
*/
|
|
#define FLASH_PSIZE_BYTE ((uint32_t)0x00000000)
|
|
#define FLASH_PSIZE_HALF_WORD ((uint32_t)FLASH_CR_PSIZE_0)
|
|
#define FLASH_PSIZE_WORD ((uint32_t)FLASH_CR_PSIZE_1)
|
|
#define FLASH_PSIZE_DOUBLE_WORD ((uint32_t)FLASH_CR_PSIZE)
|
|
#define CR_PSIZE_MASK ((uint32_t)0xFFFFFCFF)
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup FLASH_Keys FLASH Keys
|
|
* @{
|
|
*/
|
|
#define FLASH_KEY1 ((uint32_t)0x45670123)
|
|
#define FLASH_KEY2 ((uint32_t)0xCDEF89AB)
|
|
#define FLASH_OPT_KEY1 ((uint32_t)0x08192A3B)
|
|
#define FLASH_OPT_KEY2 ((uint32_t)0x4C5D6E7F)
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/* Exported macro ------------------------------------------------------------*/
|
|
/** @defgroup FLASH_Exported_Macros FLASH Exported Macros
|
|
* @{
|
|
*/
|
|
/**
|
|
* @brief Set the FLASH Latency.
|
|
* @param __LATENCY__: FLASH Latency
|
|
* The value of this parameter depend on device used within the same series
|
|
* @retval none
|
|
*/
|
|
#define __HAL_FLASH_SET_LATENCY(__LATENCY__) \
|
|
MODIFY_REG(FLASH->ACR, FLASH_ACR_LATENCY, (uint32_t)(__LATENCY__))
|
|
|
|
/**
|
|
* @brief Get the FLASH Latency.
|
|
* @retval FLASH Latency
|
|
* The value of this parameter depend on device used within the same series
|
|
*/
|
|
#define __HAL_FLASH_GET_LATENCY() (READ_BIT((FLASH->ACR), FLASH_ACR_LATENCY))
|
|
|
|
/**
|
|
* @brief Enable the FLASH prefetch buffer.
|
|
* @retval none
|
|
*/
|
|
#define __HAL_FLASH_PREFETCH_BUFFER_ENABLE() (FLASH->ACR |= FLASH_ACR_PRFTEN)
|
|
|
|
/**
|
|
* @brief Disable the FLASH prefetch buffer.
|
|
* @retval none
|
|
*/
|
|
#define __HAL_FLASH_PREFETCH_BUFFER_DISABLE() (FLASH->ACR &= (~FLASH_ACR_PRFTEN))
|
|
|
|
/**
|
|
* @brief Enable the FLASH Adaptive Real-Time memory accelerator.
|
|
* @note The ART accelerator is available only for flash access on ITCM interface.
|
|
* @retval none
|
|
*/
|
|
#define __HAL_FLASH_ART_ENABLE() SET_BIT(FLASH->ACR, FLASH_ACR_ARTEN)
|
|
|
|
/**
|
|
* @brief Disable the FLASH Adaptive Real-Time memory accelerator.
|
|
* @retval none
|
|
*/
|
|
#define __HAL_FLASH_ART_DISABLE() CLEAR_BIT(FLASH->ACR, FLASH_ACR_ARTEN)
|
|
|
|
/**
|
|
* @brief Resets the FLASH Adaptive Real-Time memory accelerator.
|
|
* @note This function must be used only when the Adaptive Real-Time memory accelerator
|
|
* is disabled.
|
|
* @retval None
|
|
*/
|
|
#define __HAL_FLASH_ART_RESET() (FLASH->ACR |= FLASH_ACR_ARTRST)
|
|
|
|
/**
|
|
* @brief Enable the specified FLASH interrupt.
|
|
* @param __INTERRUPT__ : FLASH interrupt
|
|
* This parameter can be any combination of the following values:
|
|
* @arg FLASH_IT_EOP: End of FLASH Operation Interrupt
|
|
* @arg FLASH_IT_ERR: Error Interrupt
|
|
* @retval none
|
|
*/
|
|
#define __HAL_FLASH_ENABLE_IT(__INTERRUPT__) (FLASH->CR |= (__INTERRUPT__))
|
|
|
|
/**
|
|
* @brief Disable the specified FLASH interrupt.
|
|
* @param __INTERRUPT__ : FLASH interrupt
|
|
* This parameter can be any combination of the following values:
|
|
* @arg FLASH_IT_EOP: End of FLASH Operation Interrupt
|
|
* @arg FLASH_IT_ERR: Error Interrupt
|
|
* @retval none
|
|
*/
|
|
#define __HAL_FLASH_DISABLE_IT(__INTERRUPT__) (FLASH->CR &= ~(uint32_t)(__INTERRUPT__))
|
|
|
|
/**
|
|
* @brief Get the specified FLASH flag status.
|
|
* @param __FLAG__: specifies the FLASH flag to check.
|
|
* This parameter can be one of the following values:
|
|
* @arg FLASH_FLAG_EOP : FLASH End of Operation flag
|
|
* @arg FLASH_FLAG_OPERR : FLASH operation Error flag
|
|
* @arg FLASH_FLAG_WRPERR: FLASH Write protected error flag
|
|
* @arg FLASH_FLAG_PGAERR: FLASH Programming Alignment error flag
|
|
* @arg FLASH_FLAG_PGPERR: FLASH Programming Parallelism error flag
|
|
* @arg FLASH_FLAG_ERSERR : FLASH Erasing Sequence error flag
|
|
* @arg FLASH_FLAG_BSY : FLASH Busy flag
|
|
* @retval The new state of __FLAG__ (SET or RESET).
|
|
*/
|
|
#define __HAL_FLASH_GET_FLAG(__FLAG__) ((FLASH->SR & (__FLAG__)))
|
|
|
|
/**
|
|
* @brief Clear the specified FLASH flag.
|
|
* @param __FLAG__: specifies the FLASH flags to clear.
|
|
* This parameter can be any combination of the following values:
|
|
* @arg FLASH_FLAG_EOP : FLASH End of Operation flag
|
|
* @arg FLASH_FLAG_OPERR : FLASH operation Error flag
|
|
* @arg FLASH_FLAG_WRPERR: FLASH Write protected error flag
|
|
* @arg FLASH_FLAG_PGAERR: FLASH Programming Alignment error flag
|
|
* @arg FLASH_FLAG_PGPERR: FLASH Programming Parallelism error flag
|
|
* @arg FLASH_FLAG_ERSERR : FLASH Erasing Sequence error flag
|
|
* @retval none
|
|
*/
|
|
#define __HAL_FLASH_CLEAR_FLAG(__FLAG__) (FLASH->SR = (__FLAG__))
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/* Include FLASH HAL Extension module */
|
|
#include "stm32f7xx_hal_flash_ex.h"
|
|
|
|
/* Exported functions --------------------------------------------------------*/
|
|
/** @addtogroup FLASH_Exported_Functions
|
|
* @{
|
|
*/
|
|
/** @addtogroup FLASH_Exported_Functions_Group1
|
|
* @{
|
|
*/
|
|
/* Program operation functions ***********************************************/
|
|
HAL_StatusTypeDef HAL_FLASH_Program(uint32_t TypeProgram, uint32_t Address, uint64_t Data);
|
|
HAL_StatusTypeDef HAL_FLASH_Program_IT(uint32_t TypeProgram, uint32_t Address, uint64_t Data);
|
|
/* FLASH IRQ handler method */
|
|
void HAL_FLASH_IRQHandler(void);
|
|
/* Callbacks in non blocking modes */
|
|
void HAL_FLASH_EndOfOperationCallback(uint32_t ReturnValue);
|
|
void HAL_FLASH_OperationErrorCallback(uint32_t ReturnValue);
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @addtogroup FLASH_Exported_Functions_Group2
|
|
* @{
|
|
*/
|
|
/* Peripheral Control functions **********************************************/
|
|
HAL_StatusTypeDef HAL_FLASH_Unlock(void);
|
|
HAL_StatusTypeDef HAL_FLASH_Lock(void);
|
|
HAL_StatusTypeDef HAL_FLASH_OB_Unlock(void);
|
|
HAL_StatusTypeDef HAL_FLASH_OB_Lock(void);
|
|
/* Option bytes control */
|
|
HAL_StatusTypeDef HAL_FLASH_OB_Launch(void);
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @addtogroup FLASH_Exported_Functions_Group3
|
|
* @{
|
|
*/
|
|
/* Peripheral State functions ************************************************/
|
|
uint32_t HAL_FLASH_GetError(void);
|
|
HAL_StatusTypeDef FLASH_WaitForLastOperation(uint32_t Timeout);
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
/* Private types -------------------------------------------------------------*/
|
|
/* Private variables ---------------------------------------------------------*/
|
|
/** @defgroup FLASH_Private_Variables FLASH Private Variables
|
|
* @{
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
/* Private constants ---------------------------------------------------------*/
|
|
/** @defgroup FLASH_Private_Constants FLASH Private Constants
|
|
* @{
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/* Private macros ------------------------------------------------------------*/
|
|
/** @defgroup FLASH_Private_Macros FLASH Private Macros
|
|
* @{
|
|
*/
|
|
|
|
/** @defgroup FLASH_IS_FLASH_Definitions FLASH Private macros to check input parameters
|
|
* @{
|
|
*/
|
|
#define IS_FLASH_TYPEPROGRAM(VALUE)(((VALUE) == FLASH_TYPEPROGRAM_BYTE) || \
|
|
((VALUE) == FLASH_TYPEPROGRAM_HALFWORD) || \
|
|
((VALUE) == FLASH_TYPEPROGRAM_WORD) || \
|
|
((VALUE) == FLASH_TYPEPROGRAM_DOUBLEWORD))
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/* Private functions ---------------------------------------------------------*/
|
|
/** @defgroup FLASH_Private_Functions FLASH Private Functions
|
|
* @{
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
#ifdef __cplusplus
|
|
}
|
|
#endif
|
|
|
|
#endif /* __STM32F7xx_HAL_FLASH_H */
|
|
|
|
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|