425 lines
15 KiB
C
425 lines
15 KiB
C
/**
|
|
******************************************************************************
|
|
* @file stm32f7xx_hal_pwr.h
|
|
* @author MCD Application Team
|
|
* @version V1.0.1
|
|
* @date 25-June-2015
|
|
* @brief Header file of PWR HAL module.
|
|
******************************************************************************
|
|
* @attention
|
|
*
|
|
* <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without modification,
|
|
* are permitted provided that the following conditions are met:
|
|
* 1. Redistributions of source code must retain the above copyright notice,
|
|
* this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright notice,
|
|
* this list of conditions and the following disclaimer in the documentation
|
|
* and/or other materials provided with the distribution.
|
|
* 3. Neither the name of STMicroelectronics nor the names of its contributors
|
|
* may be used to endorse or promote products derived from this software
|
|
* without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
|
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
|
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
|
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
|
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
|
|
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
|
|
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
|
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
*
|
|
******************************************************************************
|
|
*/
|
|
|
|
/* Define to prevent recursive inclusion -------------------------------------*/
|
|
#ifndef __STM32F7xx_HAL_PWR_H
|
|
#define __STM32F7xx_HAL_PWR_H
|
|
|
|
#ifdef __cplusplus
|
|
extern "C" {
|
|
#endif
|
|
|
|
/* Includes ------------------------------------------------------------------*/
|
|
#include "stm32f7xx_hal_def.h"
|
|
|
|
/** @addtogroup STM32F7xx_HAL_Driver
|
|
* @{
|
|
*/
|
|
|
|
/** @addtogroup PWR
|
|
* @{
|
|
*/
|
|
|
|
/* Exported types ------------------------------------------------------------*/
|
|
|
|
/** @defgroup PWR_Exported_Types PWR Exported Types
|
|
* @{
|
|
*/
|
|
|
|
/**
|
|
* @brief PWR PVD configuration structure definition
|
|
*/
|
|
typedef struct
|
|
{
|
|
uint32_t PVDLevel; /*!< PVDLevel: Specifies the PVD detection level.
|
|
This parameter can be a value of @ref PWR_PVD_detection_level */
|
|
|
|
uint32_t Mode; /*!< Mode: Specifies the operating mode for the selected pins.
|
|
This parameter can be a value of @ref PWR_PVD_Mode */
|
|
}PWR_PVDTypeDef;
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/* Exported constants --------------------------------------------------------*/
|
|
/** @defgroup PWR_Exported_Constants PWR Exported Constants
|
|
* @{
|
|
*/
|
|
|
|
/** @defgroup PWR_PVD_detection_level PWR PVD detection level
|
|
* @{
|
|
*/
|
|
#define PWR_PVDLEVEL_0 PWR_CR1_PLS_LEV0
|
|
#define PWR_PVDLEVEL_1 PWR_CR1_PLS_LEV1
|
|
#define PWR_PVDLEVEL_2 PWR_CR1_PLS_LEV2
|
|
#define PWR_PVDLEVEL_3 PWR_CR1_PLS_LEV3
|
|
#define PWR_PVDLEVEL_4 PWR_CR1_PLS_LEV4
|
|
#define PWR_PVDLEVEL_5 PWR_CR1_PLS_LEV5
|
|
#define PWR_PVDLEVEL_6 PWR_CR1_PLS_LEV6
|
|
#define PWR_PVDLEVEL_7 PWR_CR1_PLS_LEV7/* External input analog voltage
|
|
(Compare internally to VREFINT) */
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup PWR_PVD_Mode PWR PVD Mode
|
|
* @{
|
|
*/
|
|
#define PWR_PVD_MODE_NORMAL ((uint32_t)0x00000000) /*!< basic mode is used */
|
|
#define PWR_PVD_MODE_IT_RISING ((uint32_t)0x00010001) /*!< External Interrupt Mode with Rising edge trigger detection */
|
|
#define PWR_PVD_MODE_IT_FALLING ((uint32_t)0x00010002) /*!< External Interrupt Mode with Falling edge trigger detection */
|
|
#define PWR_PVD_MODE_IT_RISING_FALLING ((uint32_t)0x00010003) /*!< External Interrupt Mode with Rising/Falling edge trigger detection */
|
|
#define PWR_PVD_MODE_EVENT_RISING ((uint32_t)0x00020001) /*!< Event Mode with Rising edge trigger detection */
|
|
#define PWR_PVD_MODE_EVENT_FALLING ((uint32_t)0x00020002) /*!< Event Mode with Falling edge trigger detection */
|
|
#define PWR_PVD_MODE_EVENT_RISING_FALLING ((uint32_t)0x00020003) /*!< Event Mode with Rising/Falling edge trigger detection */
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup PWR_Regulator_state_in_STOP_mode PWR Regulator state in SLEEP/STOP mode
|
|
* @{
|
|
*/
|
|
#define PWR_MAINREGULATOR_ON ((uint32_t)0x00000000)
|
|
#define PWR_LOWPOWERREGULATOR_ON PWR_CR1_LPDS
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup PWR_SLEEP_mode_entry PWR SLEEP mode entry
|
|
* @{
|
|
*/
|
|
#define PWR_SLEEPENTRY_WFI ((uint8_t)0x01)
|
|
#define PWR_SLEEPENTRY_WFE ((uint8_t)0x02)
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup PWR_STOP_mode_entry PWR STOP mode entry
|
|
* @{
|
|
*/
|
|
#define PWR_STOPENTRY_WFI ((uint8_t)0x01)
|
|
#define PWR_STOPENTRY_WFE ((uint8_t)0x02)
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup PWR_Regulator_Voltage_Scale PWR Regulator Voltage Scale
|
|
* @{
|
|
*/
|
|
#define PWR_REGULATOR_VOLTAGE_SCALE1 PWR_CR1_VOS
|
|
#define PWR_REGULATOR_VOLTAGE_SCALE2 PWR_CR1_VOS_1
|
|
#define PWR_REGULATOR_VOLTAGE_SCALE3 PWR_CR1_VOS_0
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup PWR_Flag PWR Flag
|
|
* @{
|
|
*/
|
|
#define PWR_FLAG_WU PWR_CSR1_WUIF
|
|
#define PWR_FLAG_SB PWR_CSR1_SBF
|
|
#define PWR_FLAG_PVDO PWR_CSR1_PVDO
|
|
#define PWR_FLAG_BRR PWR_CSR1_BRR
|
|
#define PWR_FLAG_VOSRDY PWR_CSR1_VOSRDY
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/* Exported macro ------------------------------------------------------------*/
|
|
/** @defgroup PWR_Exported_Macro PWR Exported Macro
|
|
* @{
|
|
*/
|
|
|
|
/** @brief macros configure the main internal regulator output voltage.
|
|
* @param __REGULATOR__: specifies the regulator output voltage to achieve
|
|
* a tradeoff between performance and power consumption when the device does
|
|
* not operate at the maximum frequency (refer to the datasheets for more details).
|
|
* This parameter can be one of the following values:
|
|
* @arg PWR_REGULATOR_VOLTAGE_SCALE1: Regulator voltage output Scale 1 mode
|
|
* @arg PWR_REGULATOR_VOLTAGE_SCALE2: Regulator voltage output Scale 2 mode
|
|
* @arg PWR_REGULATOR_VOLTAGE_SCALE3: Regulator voltage output Scale 3 mode
|
|
* @retval None
|
|
*/
|
|
#define __HAL_PWR_VOLTAGESCALING_CONFIG(__REGULATOR__) do { \
|
|
__IO uint32_t tmpreg; \
|
|
MODIFY_REG(PWR->CR1, PWR_CR1_VOS, (__REGULATOR__)); \
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(PWR->CR1, PWR_CR1_VOS); \
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
|
|
/** @brief Check PWR flag is set or not.
|
|
* @param __FLAG__: specifies the flag to check.
|
|
* This parameter can be one of the following values:
|
|
* @arg PWR_FLAG_WU: Wake Up flag. This flag indicates that a wakeup event
|
|
* was received on the internal wakeup line in standby mode (RTC alarm (Alarm A or Alarm B),
|
|
* RTC Tamper event, RTC TimeStamp event or RTC Wakeup)).
|
|
* @arg PWR_FLAG_SB: StandBy flag. This flag indicates that the system was
|
|
* resumed from StandBy mode.
|
|
* @arg PWR_FLAG_PVDO: PVD Output. This flag is valid only if PVD is enabled
|
|
* by the HAL_PWR_EnablePVD() function. The PVD is stopped by Standby mode
|
|
* For this reason, this bit is equal to 0 after Standby or reset
|
|
* until the PVDE bit is set.
|
|
* @arg PWR_FLAG_BRR: Backup regulator ready flag. This bit is not reset
|
|
* when the device wakes up from Standby mode or by a system reset
|
|
* or power reset.
|
|
* @arg PWR_FLAG_VOSRDY: This flag indicates that the Regulator voltage
|
|
* scaling output selection is ready.
|
|
* @retval The new state of __FLAG__ (TRUE or FALSE).
|
|
*/
|
|
#define __HAL_PWR_GET_FLAG(__FLAG__) ((PWR->CSR1 & (__FLAG__)) == (__FLAG__))
|
|
|
|
/** @brief Clear the PWR's pending flags.
|
|
* @param __FLAG__: specifies the flag to clear.
|
|
* This parameter can be one of the following values:
|
|
* @arg PWR_FLAG_SB: StandBy flag
|
|
*/
|
|
#define __HAL_PWR_CLEAR_FLAG(__FLAG__) (PWR->CR1 |= (__FLAG__) << 2)
|
|
|
|
/**
|
|
* @brief Enable the PVD Exti Line 16.
|
|
* @retval None.
|
|
*/
|
|
#define __HAL_PWR_PVD_EXTI_ENABLE_IT() (EXTI->IMR |= (PWR_EXTI_LINE_PVD))
|
|
|
|
/**
|
|
* @brief Disable the PVD EXTI Line 16.
|
|
* @retval None.
|
|
*/
|
|
#define __HAL_PWR_PVD_EXTI_DISABLE_IT() (EXTI->IMR &= ~(PWR_EXTI_LINE_PVD))
|
|
|
|
/**
|
|
* @brief Enable event on PVD Exti Line 16.
|
|
* @retval None.
|
|
*/
|
|
#define __HAL_PWR_PVD_EXTI_ENABLE_EVENT() (EXTI->EMR |= (PWR_EXTI_LINE_PVD))
|
|
|
|
/**
|
|
* @brief Disable event on PVD Exti Line 16.
|
|
* @retval None.
|
|
*/
|
|
#define __HAL_PWR_PVD_EXTI_DISABLE_EVENT() (EXTI->EMR &= ~(PWR_EXTI_LINE_PVD))
|
|
|
|
/**
|
|
* @brief Enable the PVD Extended Interrupt Rising Trigger.
|
|
* @retval None.
|
|
*/
|
|
#define __HAL_PWR_PVD_EXTI_ENABLE_RISING_EDGE() SET_BIT(EXTI->RTSR, PWR_EXTI_LINE_PVD)
|
|
|
|
/**
|
|
* @brief Disable the PVD Extended Interrupt Rising Trigger.
|
|
* @retval None.
|
|
*/
|
|
#define __HAL_PWR_PVD_EXTI_DISABLE_RISING_EDGE() CLEAR_BIT(EXTI->RTSR, PWR_EXTI_LINE_PVD)
|
|
|
|
/**
|
|
* @brief Enable the PVD Extended Interrupt Falling Trigger.
|
|
* @retval None.
|
|
*/
|
|
#define __HAL_PWR_PVD_EXTI_ENABLE_FALLING_EDGE() SET_BIT(EXTI->FTSR, PWR_EXTI_LINE_PVD)
|
|
|
|
|
|
/**
|
|
* @brief Disable the PVD Extended Interrupt Falling Trigger.
|
|
* @retval None.
|
|
*/
|
|
#define __HAL_PWR_PVD_EXTI_DISABLE_FALLING_EDGE() CLEAR_BIT(EXTI->FTSR, PWR_EXTI_LINE_PVD)
|
|
|
|
|
|
/**
|
|
* @brief PVD EXTI line configuration: set rising & falling edge trigger.
|
|
* @retval None.
|
|
*/
|
|
#define __HAL_PWR_PVD_EXTI_ENABLE_RISING_FALLING_EDGE() __HAL_PWR_PVD_EXTI_ENABLE_RISING_EDGE();__HAL_PWR_PVD_EXTI_ENABLE_FALLING_EDGE();
|
|
|
|
/**
|
|
* @brief Disable the PVD Extended Interrupt Rising & Falling Trigger.
|
|
* @retval None.
|
|
*/
|
|
#define __HAL_PWR_PVD_EXTI_DISABLE_RISING_FALLING_EDGE() __HAL_PWR_PVD_EXTI_DISABLE_RISING_EDGE();__HAL_PWR_PVD_EXTI_DISABLE_FALLING_EDGE();
|
|
|
|
/**
|
|
* @brief checks whether the specified PVD Exti interrupt flag is set or not.
|
|
* @retval EXTI PVD Line Status.
|
|
*/
|
|
#define __HAL_PWR_PVD_EXTI_GET_FLAG() (EXTI->PR & (PWR_EXTI_LINE_PVD))
|
|
|
|
/**
|
|
* @brief Clear the PVD Exti flag.
|
|
* @retval None.
|
|
*/
|
|
#define __HAL_PWR_PVD_EXTI_CLEAR_FLAG() (EXTI->PR = (PWR_EXTI_LINE_PVD))
|
|
|
|
/**
|
|
* @brief Generates a Software interrupt on PVD EXTI line.
|
|
* @retval None
|
|
*/
|
|
#define __HAL_PWR_PVD_EXTI_GENERATE_SWIT() (EXTI->SWIER |= (PWR_EXTI_LINE_PVD))
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/* Include PWR HAL Extension module */
|
|
#include "stm32f7xx_hal_pwr_ex.h"
|
|
|
|
/* Exported functions --------------------------------------------------------*/
|
|
/** @addtogroup PWR_Exported_Functions PWR Exported Functions
|
|
* @{
|
|
*/
|
|
|
|
/** @addtogroup PWR_Exported_Functions_Group1 Initialization and de-initialization functions
|
|
* @{
|
|
*/
|
|
/* Initialization and de-initialization functions *****************************/
|
|
void HAL_PWR_DeInit(void);
|
|
void HAL_PWR_EnableBkUpAccess(void);
|
|
void HAL_PWR_DisableBkUpAccess(void);
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @addtogroup PWR_Exported_Functions_Group2 Peripheral Control functions
|
|
* @{
|
|
*/
|
|
/* Peripheral Control functions **********************************************/
|
|
/* PVD configuration */
|
|
void HAL_PWR_ConfigPVD(PWR_PVDTypeDef *sConfigPVD);
|
|
void HAL_PWR_EnablePVD(void);
|
|
void HAL_PWR_DisablePVD(void);
|
|
|
|
/* WakeUp pins configuration */
|
|
void HAL_PWR_EnableWakeUpPin(uint32_t WakeUpPinPolarity);
|
|
void HAL_PWR_DisableWakeUpPin(uint32_t WakeUpPinx);
|
|
|
|
/* Low Power modes entry */
|
|
void HAL_PWR_EnterSTOPMode(uint32_t Regulator, uint8_t STOPEntry);
|
|
void HAL_PWR_EnterSLEEPMode(uint32_t Regulator, uint8_t SLEEPEntry);
|
|
void HAL_PWR_EnterSTANDBYMode(void);
|
|
|
|
/* Power PVD IRQ Handler */
|
|
void HAL_PWR_PVD_IRQHandler(void);
|
|
void HAL_PWR_PVDCallback(void);
|
|
|
|
/* Cortex System Control functions *******************************************/
|
|
void HAL_PWR_EnableSleepOnExit(void);
|
|
void HAL_PWR_DisableSleepOnExit(void);
|
|
void HAL_PWR_EnableSEVOnPend(void);
|
|
void HAL_PWR_DisableSEVOnPend(void);
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/* Private types -------------------------------------------------------------*/
|
|
/* Private variables ---------------------------------------------------------*/
|
|
/* Private constants ---------------------------------------------------------*/
|
|
/** @defgroup PWR_Private_Constants PWR Private Constants
|
|
* @{
|
|
*/
|
|
|
|
/** @defgroup PWR_PVD_EXTI_Line PWR PVD EXTI Line
|
|
* @{
|
|
*/
|
|
#define PWR_EXTI_LINE_PVD ((uint32_t)EXTI_IMR_MR16) /*!< External interrupt line 16 Connected to the PVD EXTI Line */
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
/* Private macros ------------------------------------------------------------*/
|
|
/** @defgroup PWR_Private_Macros PWR Private Macros
|
|
* @{
|
|
*/
|
|
|
|
/** @defgroup PWR_IS_PWR_Definitions PWR Private macros to check input parameters
|
|
* @{
|
|
*/
|
|
#define IS_PWR_WAKEUP_POLARITY(POLARITY) (((POLARITY) == PWR_POLARITY_RISINGEDGE) || \
|
|
((POLARITY) == PWR_POLARITY_FALLINGEDGE))
|
|
#define IS_PWR_PVD_LEVEL(LEVEL) (((LEVEL) == PWR_PVDLEVEL_0) || ((LEVEL) == PWR_PVDLEVEL_1)|| \
|
|
((LEVEL) == PWR_PVDLEVEL_2) || ((LEVEL) == PWR_PVDLEVEL_3)|| \
|
|
((LEVEL) == PWR_PVDLEVEL_4) || ((LEVEL) == PWR_PVDLEVEL_5)|| \
|
|
((LEVEL) == PWR_PVDLEVEL_6) || ((LEVEL) == PWR_PVDLEVEL_7))
|
|
#define IS_PWR_PVD_MODE(MODE) (((MODE) == PWR_PVD_MODE_IT_RISING)|| ((MODE) == PWR_PVD_MODE_IT_FALLING) || \
|
|
((MODE) == PWR_PVD_MODE_IT_RISING_FALLING) || ((MODE) == PWR_PVD_MODE_EVENT_RISING) || \
|
|
((MODE) == PWR_PVD_MODE_EVENT_FALLING) || ((MODE) == PWR_PVD_MODE_EVENT_RISING_FALLING) || \
|
|
((MODE) == PWR_PVD_MODE_NORMAL))
|
|
#define IS_PWR_REGULATOR(REGULATOR) (((REGULATOR) == PWR_MAINREGULATOR_ON) || \
|
|
((REGULATOR) == PWR_LOWPOWERREGULATOR_ON))
|
|
#define IS_PWR_SLEEP_ENTRY(ENTRY) (((ENTRY) == PWR_SLEEPENTRY_WFI) || ((ENTRY) == PWR_SLEEPENTRY_WFE))
|
|
#define IS_PWR_STOP_ENTRY(ENTRY) (((ENTRY) == PWR_STOPENTRY_WFI) || ((ENTRY) == PWR_STOPENTRY_WFE))
|
|
#define IS_PWR_REGULATOR_VOLTAGE(VOLTAGE) (((VOLTAGE) == PWR_REGULATOR_VOLTAGE_SCALE1) || \
|
|
((VOLTAGE) == PWR_REGULATOR_VOLTAGE_SCALE2) || \
|
|
((VOLTAGE) == PWR_REGULATOR_VOLTAGE_SCALE3))
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
#ifdef __cplusplus
|
|
}
|
|
#endif
|
|
|
|
|
|
#endif /* __STM32F7xx_HAL_PWR_H */
|
|
|
|
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|