2699 lines
162 KiB
C
2699 lines
162 KiB
C
/**
|
|
******************************************************************************
|
|
* @file stm32f7xx_hal_rcc_ex.h
|
|
* @author MCD Application Team
|
|
* @version V1.0.1
|
|
* @date 25-June-2015
|
|
* @brief Header file of RCC HAL Extension module.
|
|
******************************************************************************
|
|
* @attention
|
|
*
|
|
* <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without modification,
|
|
* are permitted provided that the following conditions are met:
|
|
* 1. Redistributions of source code must retain the above copyright notice,
|
|
* this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright notice,
|
|
* this list of conditions and the following disclaimer in the documentation
|
|
* and/or other materials provided with the distribution.
|
|
* 3. Neither the name of STMicroelectronics nor the names of its contributors
|
|
* may be used to endorse or promote products derived from this software
|
|
* without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
|
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
|
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
|
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
|
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
|
|
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
|
|
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
|
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
*
|
|
******************************************************************************
|
|
*/
|
|
|
|
/* Define to prevent recursive inclusion -------------------------------------*/
|
|
#ifndef __STM32F7xx_HAL_RCC_EX_H
|
|
#define __STM32F7xx_HAL_RCC_EX_H
|
|
|
|
#ifdef __cplusplus
|
|
extern "C" {
|
|
#endif
|
|
|
|
/* Includes ------------------------------------------------------------------*/
|
|
#include "stm32f7xx_hal_def.h"
|
|
|
|
/** @addtogroup STM32F7xx_HAL_Driver
|
|
* @{
|
|
*/
|
|
|
|
/** @addtogroup RCCEx
|
|
* @{
|
|
*/
|
|
|
|
/* Exported types ------------------------------------------------------------*/
|
|
/** @defgroup RCCEx_Exported_Types RCCEx Exported Types
|
|
* @{
|
|
*/
|
|
|
|
/**
|
|
* @brief PLLI2S Clock structure definition
|
|
*/
|
|
typedef struct
|
|
{
|
|
uint32_t PLLI2SN; /*!< Specifies the multiplication factor for PLLI2S VCO output clock.
|
|
This parameter must be a number between Min_Data = 49 and Max_Data = 432.
|
|
This parameter will be used only when PLLI2S is selected as Clock Source I2S or SAI */
|
|
|
|
uint32_t PLLI2SR; /*!< Specifies the division factor for I2S clock.
|
|
This parameter must be a number between Min_Data = 2 and Max_Data = 7.
|
|
This parameter will be used only when PLLI2S is selected as Clock Source I2S or SAI */
|
|
|
|
uint32_t PLLI2SQ; /*!< Specifies the division factor for SAI1 clock.
|
|
This parameter must be a number between Min_Data = 2 and Max_Data = 15.
|
|
This parameter will be used only when PLLI2S is selected as Clock Source SAI */
|
|
|
|
uint32_t PLLI2SP; /*!< Specifies the division factor for SPDIF-RX clock.
|
|
This parameter must be a number between 0 and 3 for respective values 2, 4, 6 and 8.
|
|
This parameter will be used only when PLLI2S is selected as Clock Source SPDDIF-RX */
|
|
}RCC_PLLI2SInitTypeDef;
|
|
|
|
/**
|
|
* @brief PLLSAI Clock structure definition
|
|
*/
|
|
typedef struct
|
|
{
|
|
uint32_t PLLSAIN; /*!< Specifies the multiplication factor for PLLI2S VCO output clock.
|
|
This parameter must be a number between Min_Data = 49 and Max_Data = 432.
|
|
This parameter will be used only when PLLSAI is selected as Clock Source SAI or LTDC */
|
|
|
|
uint32_t PLLSAIQ; /*!< Specifies the division factor for SAI1 clock.
|
|
This parameter must be a number between Min_Data = 2 and Max_Data = 15.
|
|
This parameter will be used only when PLLSAI is selected as Clock Source SAI or LTDC */
|
|
|
|
uint32_t PLLSAIR; /*!< specifies the division factor for LTDC clock
|
|
This parameter must be a number between Min_Data = 2 and Max_Data = 7.
|
|
This parameter will be used only when PLLSAI is selected as Clock Source LTDC */
|
|
|
|
uint32_t PLLSAIP; /*!< Specifies the division factor for 48MHz clock.
|
|
This parameter can be a value of @ref RCCEx_PLLSAIP_Clock_Divider
|
|
This parameter will be used only when PLLSAI is disabled */
|
|
}RCC_PLLSAIInitTypeDef;
|
|
|
|
/**
|
|
* @brief RCC extended clocks structure definition
|
|
*/
|
|
typedef struct
|
|
{
|
|
uint32_t PeriphClockSelection; /*!< The Extended Clock to be configured.
|
|
This parameter can be a value of @ref RCCEx_Periph_Clock_Selection */
|
|
|
|
RCC_PLLI2SInitTypeDef PLLI2S; /*!< PLL I2S structure parameters.
|
|
This parameter will be used only when PLLI2S is selected as Clock Source I2S or SAI */
|
|
|
|
RCC_PLLSAIInitTypeDef PLLSAI; /*!< PLL SAI structure parameters.
|
|
This parameter will be used only when PLLI2S is selected as Clock Source SAI or LTDC */
|
|
|
|
uint32_t PLLI2SDivQ; /*!< Specifies the PLLI2S division factor for SAI1 clock.
|
|
This parameter must be a number between Min_Data = 1 and Max_Data = 32
|
|
This parameter will be used only when PLLI2S is selected as Clock Source SAI */
|
|
|
|
uint32_t PLLSAIDivQ; /*!< Specifies the PLLI2S division factor for SAI1 clock.
|
|
This parameter must be a number between Min_Data = 1 and Max_Data = 32
|
|
This parameter will be used only when PLLSAI is selected as Clock Source SAI */
|
|
|
|
uint32_t PLLSAIDivR; /*!< Specifies the PLLSAI division factor for LTDC clock.
|
|
This parameter must be one value of @ref RCCEx_PLLSAI_DIVR */
|
|
|
|
uint32_t RTCClockSelection; /*!< Specifies RTC Clock source Selection.
|
|
This parameter can be a value of @ref RCC_RTC_Clock_Source */
|
|
|
|
uint32_t I2sClockSelection; /*!< Specifies I2S Clock source Selection.
|
|
This parameter can be a value of @ref RCCEx_I2S_Clock_Source */
|
|
|
|
uint32_t TIMPresSelection; /*!< Specifies TIM Clock Prescalers Selection.
|
|
This parameter can be a value of @ref RCCEx_TIM_Prescaler_Selection */
|
|
|
|
uint32_t Sai1ClockSelection; /*!< Specifies SAI1 Clock Prescalers Selection
|
|
This parameter can be a value of @ref RCCEx_SAI1_Clock_Source */
|
|
|
|
uint32_t Sai2ClockSelection; /*!< Specifies SAI2 Clock Prescalers Selection
|
|
This parameter can be a value of @ref RCCEx_SAI2_Clock_Source */
|
|
|
|
uint32_t Usart1ClockSelection; /*!< USART1 clock source
|
|
This parameter can be a value of @ref RCCEx_USART1_Clock_Source */
|
|
|
|
uint32_t Usart2ClockSelection; /*!< USART2 clock source
|
|
This parameter can be a value of @ref RCCEx_USART2_Clock_Source */
|
|
|
|
uint32_t Usart3ClockSelection; /*!< USART3 clock source
|
|
This parameter can be a value of @ref RCCEx_USART3_Clock_Source */
|
|
|
|
uint32_t Uart4ClockSelection; /*!< UART4 clock source
|
|
This parameter can be a value of @ref RCCEx_UART4_Clock_Source */
|
|
|
|
uint32_t Uart5ClockSelection; /*!< UART5 clock source
|
|
This parameter can be a value of @ref RCCEx_UART5_Clock_Source */
|
|
|
|
uint32_t Usart6ClockSelection; /*!< USART6 clock source
|
|
This parameter can be a value of @ref RCCEx_USART6_Clock_Source */
|
|
|
|
uint32_t Uart7ClockSelection; /*!< UART7 clock source
|
|
This parameter can be a value of @ref RCCEx_UART7_Clock_Source */
|
|
|
|
uint32_t Uart8ClockSelection; /*!< UART8 clock source
|
|
This parameter can be a value of @ref RCCEx_UART8_Clock_Source */
|
|
|
|
uint32_t I2c1ClockSelection; /*!< I2C1 clock source
|
|
This parameter can be a value of @ref RCCEx_I2C1_Clock_Source */
|
|
|
|
uint32_t I2c2ClockSelection; /*!< I2C2 clock source
|
|
This parameter can be a value of @ref RCCEx_I2C2_Clock_Source */
|
|
|
|
uint32_t I2c3ClockSelection; /*!< I2C3 clock source
|
|
This parameter can be a value of @ref RCCEx_I2C3_Clock_Source */
|
|
|
|
uint32_t I2c4ClockSelection; /*!< I2C4 clock source
|
|
This parameter can be a value of @ref RCCEx_I2C4_Clock_Source */
|
|
|
|
uint32_t Lptim1ClockSelection; /*!< Specifies LPTIM1 clock source
|
|
This parameter can be a value of @ref RCCEx_LPTIM1_Clock_Source */
|
|
|
|
uint32_t CecClockSelection; /*!< CEC clock source
|
|
This parameter can be a value of @ref RCCEx_CEC_Clock_Source */
|
|
|
|
uint32_t Clk48ClockSelection; /*!< Specifies 48Mhz clock source used by USB OTG FS, RNG and SDMMC
|
|
This parameter can be a value of @ref RCCEx_CLK48_Clock_Source */
|
|
|
|
uint32_t Sdmmc1ClockSelection; /*!< SDMMC1 clock source
|
|
This parameter can be a value of @ref RCCEx_SDMMC1_Clock_Source */
|
|
|
|
}RCC_PeriphCLKInitTypeDef;
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/* Exported constants --------------------------------------------------------*/
|
|
/** @defgroup RCCEx_Exported_Constants RCCEx Exported Constants
|
|
* @{
|
|
*/
|
|
|
|
/** @defgroup RCCEx_Periph_Clock_Selection RCC Periph Clock Selection
|
|
* @{
|
|
*/
|
|
#define RCC_PERIPHCLK_I2S ((uint32_t)0x00000001)
|
|
#if defined(STM32F756xx) || defined(STM32F746xx)
|
|
#define RCC_PERIPHCLK_LTDC ((uint32_t)0x00000008)
|
|
#endif /* STM32F756xx || STM32F746xx */
|
|
#define RCC_PERIPHCLK_TIM ((uint32_t)0x00000010)
|
|
#define RCC_PERIPHCLK_RTC ((uint32_t)0x00000020)
|
|
#define RCC_PERIPHCLK_USART1 ((uint32_t)0x00000040)
|
|
#define RCC_PERIPHCLK_USART2 ((uint32_t)0x00000080)
|
|
#define RCC_PERIPHCLK_USART3 ((uint32_t)0x00000100)
|
|
#define RCC_PERIPHCLK_UART4 ((uint32_t)0x00000200)
|
|
#define RCC_PERIPHCLK_UART5 ((uint32_t)0x00000400)
|
|
#define RCC_PERIPHCLK_USART6 ((uint32_t)0x00000800)
|
|
#define RCC_PERIPHCLK_UART7 ((uint32_t)0x00001000)
|
|
#define RCC_PERIPHCLK_UART8 ((uint32_t)0x00002000)
|
|
#define RCC_PERIPHCLK_I2C1 ((uint32_t)0x00004000)
|
|
#define RCC_PERIPHCLK_I2C2 ((uint32_t)0x00008000)
|
|
#define RCC_PERIPHCLK_I2C3 ((uint32_t)0x00010000)
|
|
#define RCC_PERIPHCLK_I2C4 ((uint32_t)0x00020000)
|
|
#define RCC_PERIPHCLK_LPTIM1 ((uint32_t)0x00040000)
|
|
#define RCC_PERIPHCLK_SAI1 ((uint32_t)0x00080000)
|
|
#define RCC_PERIPHCLK_SAI2 ((uint32_t)0x00100000)
|
|
#define RCC_PERIPHCLK_CLK48 ((uint32_t)0x00200000)
|
|
#define RCC_PERIPHCLK_CEC ((uint32_t)0x00400000)
|
|
#define RCC_PERIPHCLK_SDMMC1 ((uint32_t)0x00800000)
|
|
#define RCC_PERIPHCLK_SPDIFRX ((uint32_t)0x01000000)
|
|
#define RCC_PERIPHCLK_PLLI2S ((uint32_t)0x02000000)
|
|
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RCCEx_PLLSAIP_Clock_Divider RCCEx PLLSAIP Clock Divider
|
|
* @{
|
|
*/
|
|
#define RCC_PLLSAIP_DIV2 ((uint32_t)0x00000000)
|
|
#define RCC_PLLSAIP_DIV4 ((uint32_t)0x00000001)
|
|
#define RCC_PLLSAIP_DIV6 ((uint32_t)0x00000002)
|
|
#define RCC_PLLSAIP_DIV8 ((uint32_t)0x00000003)
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RCCEx_PLLSAI_DIVR RCCEx PLLSAI DIVR
|
|
* @{
|
|
*/
|
|
#define RCC_PLLSAIDIVR_2 ((uint32_t)0x00000000)
|
|
#define RCC_PLLSAIDIVR_4 RCC_DCKCFGR1_PLLSAIDIVR_0
|
|
#define RCC_PLLSAIDIVR_8 RCC_DCKCFGR1_PLLSAIDIVR_1
|
|
#define RCC_PLLSAIDIVR_16 RCC_DCKCFGR1_PLLSAIDIVR
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RCCEx_I2S_Clock_Source RCCEx I2S Clock Source
|
|
* @{
|
|
*/
|
|
#define RCC_I2SCLKSOURCE_PLLI2S ((uint32_t)0x00000000)
|
|
#define RCC_I2SCLKSOURCE_EXT RCC_CFGR_I2SSRC
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
|
|
/** @defgroup RCCEx_SAI1_Clock_Source RCCEx SAI1 Clock Source
|
|
* @{
|
|
*/
|
|
#define RCC_SAI1CLKSOURCE_PLLSAI ((uint32_t)0x00000000)
|
|
#define RCC_SAI1CLKSOURCE_PLLI2S RCC_DCKCFGR1_SAI1SEL_0
|
|
#define RCC_SAI1CLKSOURCE_PIN RCC_DCKCFGR1_SAI1SEL_1
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RCCEx_SAI2_Clock_Source RCCEx SAI2 Clock Source
|
|
* @{
|
|
*/
|
|
#define RCC_SAI2CLKSOURCE_PLLSAI ((uint32_t)0x00000000)
|
|
#define RCC_SAI2CLKSOURCE_PLLI2S RCC_DCKCFGR1_SAI2SEL_0
|
|
#define RCC_SAI2CLKSOURCE_PIN RCC_DCKCFGR1_SAI2SEL_1
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RCCEx_SDMMC1_Clock_Source RCCEx SDMMC1 Clock Source
|
|
* @{
|
|
*/
|
|
#define RCC_SDMMC1CLKSOURCE_CLK48 ((uint32_t)0x00000000)
|
|
#define RCC_SDMMC1CLKSOURCE_SYSCLK RCC_DCKCFGR2_SDMMC1SEL
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RCCEx_CEC_Clock_Source RCCEx CEC Clock Source
|
|
* @{
|
|
*/
|
|
#define RCC_CECCLKSOURCE_LSE ((uint32_t)0x00000000)
|
|
#define RCC_CECCLKSOURCE_HSI RCC_DCKCFGR2_CECSEL /* CEC clock is HSI/488*/
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RCCEx_USART1_Clock_Source RCCEx USART1 Clock Source
|
|
* @{
|
|
*/
|
|
#define RCC_USART1CLKSOURCE_PCLK2 ((uint32_t)0x00000000)
|
|
#define RCC_USART1CLKSOURCE_SYSCLK RCC_DCKCFGR2_USART1SEL_0
|
|
#define RCC_USART1CLKSOURCE_HSI RCC_DCKCFGR2_USART1SEL_1
|
|
#define RCC_USART1CLKSOURCE_LSE RCC_DCKCFGR2_USART1SEL
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RCCEx_USART2_Clock_Source RCCEx USART2 Clock Source
|
|
* @{
|
|
*/
|
|
#define RCC_USART2CLKSOURCE_PCLK1 ((uint32_t)0x00000000)
|
|
#define RCC_USART2CLKSOURCE_SYSCLK RCC_DCKCFGR2_USART2SEL_0
|
|
#define RCC_USART2CLKSOURCE_HSI RCC_DCKCFGR2_USART2SEL_1
|
|
#define RCC_USART2CLKSOURCE_LSE RCC_DCKCFGR2_USART2SEL
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RCCEx_USART3_Clock_Source RCCEx USART3 Clock Source
|
|
* @{
|
|
*/
|
|
#define RCC_USART3CLKSOURCE_PCLK1 ((uint32_t)0x00000000)
|
|
#define RCC_USART3CLKSOURCE_SYSCLK RCC_DCKCFGR2_USART3SEL_0
|
|
#define RCC_USART3CLKSOURCE_HSI RCC_DCKCFGR2_USART3SEL_1
|
|
#define RCC_USART3CLKSOURCE_LSE RCC_DCKCFGR2_USART3SEL
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RCCEx_UART4_Clock_Source RCCEx UART4 Clock Source
|
|
* @{
|
|
*/
|
|
#define RCC_UART4CLKSOURCE_PCLK1 ((uint32_t)0x00000000)
|
|
#define RCC_UART4CLKSOURCE_SYSCLK RCC_DCKCFGR2_UART4SEL_0
|
|
#define RCC_UART4CLKSOURCE_HSI RCC_DCKCFGR2_UART4SEL_1
|
|
#define RCC_UART4CLKSOURCE_LSE RCC_DCKCFGR2_UART4SEL
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RCCEx_UART5_Clock_Source RCCEx UART5 Clock Source
|
|
* @{
|
|
*/
|
|
#define RCC_UART5CLKSOURCE_PCLK1 ((uint32_t)0x00000000)
|
|
#define RCC_UART5CLKSOURCE_SYSCLK RCC_DCKCFGR2_UART5SEL_0
|
|
#define RCC_UART5CLKSOURCE_HSI RCC_DCKCFGR2_UART5SEL_1
|
|
#define RCC_UART5CLKSOURCE_LSE RCC_DCKCFGR2_UART5SEL
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RCCEx_USART6_Clock_Source RCCEx USART6 Clock Source
|
|
* @{
|
|
*/
|
|
#define RCC_USART6CLKSOURCE_PCLK2 ((uint32_t)0x00000000)
|
|
#define RCC_USART6CLKSOURCE_SYSCLK RCC_DCKCFGR2_USART6SEL_0
|
|
#define RCC_USART6CLKSOURCE_HSI RCC_DCKCFGR2_USART6SEL_1
|
|
#define RCC_USART6CLKSOURCE_LSE RCC_DCKCFGR2_USART6SEL
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RCCEx_UART7_Clock_Source RCCEx UART7 Clock Source
|
|
* @{
|
|
*/
|
|
#define RCC_UART7CLKSOURCE_PCLK1 ((uint32_t)0x00000000)
|
|
#define RCC_UART7CLKSOURCE_SYSCLK RCC_DCKCFGR2_UART7SEL_0
|
|
#define RCC_UART7CLKSOURCE_HSI RCC_DCKCFGR2_UART7SEL_1
|
|
#define RCC_UART7CLKSOURCE_LSE RCC_DCKCFGR2_UART7SEL
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RCCEx_UART8_Clock_Source RCCEx UART8 Clock Source
|
|
* @{
|
|
*/
|
|
#define RCC_UART8CLKSOURCE_PCLK1 ((uint32_t)0x00000000)
|
|
#define RCC_UART8CLKSOURCE_SYSCLK RCC_DCKCFGR2_UART8SEL_0
|
|
#define RCC_UART8CLKSOURCE_HSI RCC_DCKCFGR2_UART8SEL_1
|
|
#define RCC_UART8CLKSOURCE_LSE RCC_DCKCFGR2_UART8SEL
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RCCEx_I2C1_Clock_Source RCCEx I2C1 Clock Source
|
|
* @{
|
|
*/
|
|
#define RCC_I2C1CLKSOURCE_PCLK1 ((uint32_t)0x00000000)
|
|
#define RCC_I2C1CLKSOURCE_SYSCLK RCC_DCKCFGR2_I2C1SEL_0
|
|
#define RCC_I2C1CLKSOURCE_HSI RCC_DCKCFGR2_I2C1SEL_1
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RCCEx_I2C2_Clock_Source RCCEx I2C2 Clock Source
|
|
* @{
|
|
*/
|
|
#define RCC_I2C2CLKSOURCE_PCLK1 ((uint32_t)0x00000000)
|
|
#define RCC_I2C2CLKSOURCE_SYSCLK RCC_DCKCFGR2_I2C2SEL_0
|
|
#define RCC_I2C2CLKSOURCE_HSI RCC_DCKCFGR2_I2C2SEL_1
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RCCEx_I2C3_Clock_Source RCCEx I2C3 Clock Source
|
|
* @{
|
|
*/
|
|
#define RCC_I2C3CLKSOURCE_PCLK1 ((uint32_t)0x00000000)
|
|
#define RCC_I2C3CLKSOURCE_SYSCLK RCC_DCKCFGR2_I2C3SEL_0
|
|
#define RCC_I2C3CLKSOURCE_HSI RCC_DCKCFGR2_I2C3SEL_1
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RCCEx_I2C4_Clock_Source RCCEx I2C4 Clock Source
|
|
* @{
|
|
*/
|
|
#define RCC_I2C4CLKSOURCE_PCLK1 ((uint32_t)0x00000000)
|
|
#define RCC_I2C4CLKSOURCE_SYSCLK RCC_DCKCFGR2_I2C4SEL_0
|
|
#define RCC_I2C4CLKSOURCE_HSI RCC_DCKCFGR2_I2C4SEL_1
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
|
|
/** @defgroup RCCEx_LPTIM1_Clock_Source RCCEx LPTIM1 Clock Source
|
|
* @{
|
|
*/
|
|
#define RCC_LPTIM1CLKSOURCE_PCLK ((uint32_t)0x00000000)
|
|
#define RCC_LPTIM1CLKSOURCE_LSI RCC_DCKCFGR2_LPTIM1SEL_0
|
|
#define RCC_LPTIM1CLKSOURCE_HSI RCC_DCKCFGR2_LPTIM1SEL_1
|
|
#define RCC_LPTIM1CLKSOURCE_LSE RCC_DCKCFGR2_LPTIM1SEL
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RCCEx_CLK48_Clock_Source RCCEx CLK48 Clock Source
|
|
* @{
|
|
*/
|
|
#define RCC_CLK48SOURCE_PLL ((uint32_t)0x00000000)
|
|
#define RCC_CLK48SOURCE_PLLSAIP RCC_DCKCFGR2_CK48MSEL
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RCCEx_TIM_Prescaler_Selection RCCEx TIM Prescaler Selection
|
|
* @{
|
|
*/
|
|
#define RCC_TIMPRES_DESACTIVATED ((uint32_t)0x00000000)
|
|
#define RCC_TIMPRES_ACTIVATED RCC_DCKCFGR1_TIMPRE
|
|
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/* Exported macro ------------------------------------------------------------*/
|
|
/** @defgroup RCCEx_Exported_Macros RCCEx Exported Macros
|
|
* @{
|
|
*/
|
|
/** @defgroup RCCEx_Peripheral_Clock_Enable_Disable RCCEx_Peripheral_Clock_Enable_Disable
|
|
* @brief Enables or disables the AHB/APB peripheral clock.
|
|
* @note After reset, the peripheral clock (used for registers read/write access)
|
|
* is disabled and the application software has to enable this clock before
|
|
* using it.
|
|
* @{
|
|
*/
|
|
|
|
/** @brief Enables or disables the AHB1 peripheral clock.
|
|
* @note After reset, the peripheral clock (used for registers read/write access)
|
|
* is disabled and the application software has to enable this clock before
|
|
* using it.
|
|
*/
|
|
#define __HAL_RCC_BKPSRAM_CLK_ENABLE() do { \
|
|
__IO uint32_t tmpreg; \
|
|
SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_BKPSRAMEN);\
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_BKPSRAMEN);\
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
|
|
#define __HAL_RCC_DTCMRAMEN_CLK_ENABLE() do { \
|
|
__IO uint32_t tmpreg; \
|
|
SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_DTCMRAMEN);\
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_DTCMRAMEN);\
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
|
|
#define __HAL_RCC_DMA2_CLK_ENABLE() do { \
|
|
__IO uint32_t tmpreg; \
|
|
SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_DMA2EN);\
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_DMA2EN);\
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
|
|
#define __HAL_RCC_DMA2D_CLK_ENABLE() do { \
|
|
__IO uint32_t tmpreg; \
|
|
SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_DMA2DEN);\
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_DMA2DEN);\
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
|
|
#define __HAL_RCC_USB_OTG_HS_CLK_ENABLE() do { \
|
|
__IO uint32_t tmpreg; \
|
|
SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_OTGHSEN);\
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_OTGHSEN);\
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
|
|
#define __HAL_RCC_USB_OTG_HS_ULPI_CLK_ENABLE() do { \
|
|
__IO uint32_t tmpreg; \
|
|
SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_OTGHSULPIEN);\
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_OTGHSULPIEN);\
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
|
|
#define __HAL_RCC_GPIOA_CLK_ENABLE() do { \
|
|
__IO uint32_t tmpreg; \
|
|
SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOAEN);\
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOAEN);\
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
|
|
#define __HAL_RCC_GPIOB_CLK_ENABLE() do { \
|
|
__IO uint32_t tmpreg; \
|
|
SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOBEN);\
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOBEN);\
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
|
|
#define __HAL_RCC_GPIOC_CLK_ENABLE() do { \
|
|
__IO uint32_t tmpreg; \
|
|
SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOCEN);\
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOCEN);\
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
|
|
#define __HAL_RCC_GPIOD_CLK_ENABLE() do { \
|
|
__IO uint32_t tmpreg; \
|
|
SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIODEN);\
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIODEN);\
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
|
|
#define __HAL_RCC_GPIOE_CLK_ENABLE() do { \
|
|
__IO uint32_t tmpreg; \
|
|
SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOEEN);\
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOEEN);\
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
|
|
#define __HAL_RCC_GPIOF_CLK_ENABLE() do { \
|
|
__IO uint32_t tmpreg; \
|
|
SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOFEN);\
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOFEN);\
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
|
|
#define __HAL_RCC_GPIOG_CLK_ENABLE() do { \
|
|
__IO uint32_t tmpreg; \
|
|
SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOGEN);\
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOGEN);\
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
|
|
#define __HAL_RCC_GPIOH_CLK_ENABLE() do { \
|
|
__IO uint32_t tmpreg; \
|
|
SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOHEN);\
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOHEN);\
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
|
|
#define __HAL_RCC_GPIOI_CLK_ENABLE() do { \
|
|
__IO uint32_t tmpreg; \
|
|
SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOIEN);\
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOIEN);\
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
|
|
#define __HAL_RCC_GPIOJ_CLK_ENABLE() do { \
|
|
__IO uint32_t tmpreg; \
|
|
SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOJEN);\
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOJEN);\
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
|
|
#define __HAL_RCC_GPIOK_CLK_ENABLE() do { \
|
|
__IO uint32_t tmpreg; \
|
|
SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOKEN);\
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOKEN);\
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
|
|
#define __HAL_RCC_BKPSRAM_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_BKPSRAMEN))
|
|
#define __HAL_RCC_DTCMRAMEN_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_DTCMRAMEN))
|
|
#define __HAL_RCC_DMA2_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_DMA2EN))
|
|
#define __HAL_RCC_DMA2D_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_DMA2DEN))
|
|
#define __HAL_RCC_USB_OTG_HS_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_OTGHSEN))
|
|
#define __HAL_RCC_USB_OTG_HS_ULPI_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_OTGHSULPIEN))
|
|
#define __HAL_RCC_GPIOA_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOAEN))
|
|
#define __HAL_RCC_GPIOB_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOBEN))
|
|
#define __HAL_RCC_GPIOC_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOCEN))
|
|
#define __HAL_RCC_GPIOD_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIODEN))
|
|
#define __HAL_RCC_GPIOE_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOEEN))
|
|
#define __HAL_RCC_GPIOF_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOFEN))
|
|
#define __HAL_RCC_GPIOG_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOGEN))
|
|
#define __HAL_RCC_GPIOH_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOHEN))
|
|
#define __HAL_RCC_GPIOI_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOIEN))
|
|
#define __HAL_RCC_GPIOJ_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOJEN))
|
|
#define __HAL_RCC_GPIOK_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOKEN))
|
|
/**
|
|
* @brief Enable ETHERNET clock.
|
|
*/
|
|
#define __HAL_RCC_ETHMAC_CLK_ENABLE() do { \
|
|
__IO uint32_t tmpreg; \
|
|
SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_ETHMACEN);\
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_ETHMACEN);\
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
|
|
#define __HAL_RCC_ETHMACTX_CLK_ENABLE() do { \
|
|
__IO uint32_t tmpreg; \
|
|
SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_ETHMACTXEN);\
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_ETHMACTXEN);\
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
|
|
#define __HAL_RCC_ETHMACRX_CLK_ENABLE() do { \
|
|
__IO uint32_t tmpreg; \
|
|
SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_ETHMACRXEN);\
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_ETHMACRXEN);\
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
|
|
#define __HAL_RCC_ETHMACPTP_CLK_ENABLE() do { \
|
|
__IO uint32_t tmpreg; \
|
|
SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_ETHMACPTPEN);\
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_ETHMACPTPEN);\
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
|
|
#define __HAL_RCC_ETH_CLK_ENABLE() do { \
|
|
__HAL_RCC_ETHMAC_CLK_ENABLE(); \
|
|
__HAL_RCC_ETHMACTX_CLK_ENABLE(); \
|
|
__HAL_RCC_ETHMACRX_CLK_ENABLE(); \
|
|
} while(0)
|
|
/**
|
|
* @brief Disable ETHERNET clock.
|
|
*/
|
|
#define __HAL_RCC_ETHMAC_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_ETHMACEN))
|
|
#define __HAL_RCC_ETHMACTX_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_ETHMACTXEN))
|
|
#define __HAL_RCC_ETHMACRX_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_ETHMACRXEN))
|
|
#define __HAL_RCC_ETHMACPTP_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_ETHMACPTPEN))
|
|
#define __HAL_RCC_ETH_CLK_DISABLE() do { \
|
|
__HAL_RCC_ETHMACTX_CLK_DISABLE(); \
|
|
__HAL_RCC_ETHMACRX_CLK_DISABLE(); \
|
|
__HAL_RCC_ETHMAC_CLK_DISABLE(); \
|
|
} while(0)
|
|
|
|
/** @brief Enable or disable the AHB2 peripheral clock.
|
|
* @note After reset, the peripheral clock (used for registers read/write access)
|
|
* is disabled and the application software has to enable this clock before
|
|
* using it.
|
|
*/
|
|
#define __HAL_RCC_DCMI_CLK_ENABLE() do { \
|
|
__IO uint32_t tmpreg; \
|
|
SET_BIT(RCC->AHB2ENR, RCC_AHB2ENR_DCMIEN);\
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_DCMIEN);\
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
|
|
#define __HAL_RCC_RNG_CLK_ENABLE() do { \
|
|
__IO uint32_t tmpreg; \
|
|
SET_BIT(RCC->AHB2ENR, RCC_AHB2ENR_RNGEN);\
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_RNGEN);\
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
|
|
#define __HAL_RCC_USB_OTG_FS_CLK_ENABLE() do { \
|
|
__IO uint32_t tmpreg; \
|
|
SET_BIT(RCC->AHB2ENR, RCC_AHB2ENR_OTGFSEN);\
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_OTGFSEN);\
|
|
UNUSED(tmpreg); \
|
|
__HAL_RCC_SYSCFG_CLK_ENABLE();\
|
|
} while(0)
|
|
|
|
#define __HAL_RCC_DCMI_CLK_DISABLE() (RCC->AHB2ENR &= ~(RCC_AHB2ENR_DCMIEN))
|
|
#define __HAL_RCC_RNG_CLK_DISABLE() (RCC->AHB2ENR &= ~(RCC_AHB2ENR_RNGEN))
|
|
|
|
#define __HAL_RCC_USB_OTG_FS_CLK_DISABLE() do { (RCC->AHB2ENR &= ~(RCC_AHB2ENR_OTGFSEN));\
|
|
__HAL_RCC_SYSCFG_CLK_DISABLE();\
|
|
}while(0)
|
|
#if defined(STM32F756xx)
|
|
#define __HAL_RCC_CRYP_CLK_ENABLE() do { \
|
|
__IO uint32_t tmpreg; \
|
|
SET_BIT(RCC->AHB2ENR, RCC_AHB2ENR_CRYPEN);\
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_CRYPEN);\
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
|
|
#define __HAL_RCC_HASH_CLK_ENABLE() do { \
|
|
__IO uint32_t tmpreg; \
|
|
SET_BIT(RCC->AHB2ENR, RCC_AHB2ENR_HASHEN);\
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_HASHEN);\
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
|
|
#define __HAL_RCC_CRYP_CLK_DISABLE() (RCC->AHB2ENR &= ~(RCC_AHB2ENR_CRYPEN))
|
|
#define __HAL_RCC_HASH_CLK_DISABLE() (RCC->AHB2ENR &= ~(RCC_AHB2ENR_HASHEN))
|
|
#endif /* STM32F756x */
|
|
/** @brief Enables or disables the AHB3 peripheral clock.
|
|
* @note After reset, the peripheral clock (used for registers read/write access)
|
|
* is disabled and the application software has to enable this clock before
|
|
* using it.
|
|
*/
|
|
#define __HAL_RCC_FMC_CLK_ENABLE() do { \
|
|
__IO uint32_t tmpreg; \
|
|
SET_BIT(RCC->AHB3ENR, RCC_AHB3ENR_FMCEN);\
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_FMCEN);\
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
|
|
#define __HAL_RCC_QSPI_CLK_ENABLE() do { \
|
|
__IO uint32_t tmpreg; \
|
|
SET_BIT(RCC->AHB3ENR, RCC_AHB3ENR_QSPIEN);\
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_QSPIEN);\
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
|
|
#define __HAL_RCC_FMC_CLK_DISABLE() (RCC->AHB3ENR &= ~(RCC_AHB3ENR_FMCEN))
|
|
#define __HAL_RCC_QSPI_CLK_DISABLE() (RCC->AHB3ENR &= ~(RCC_AHB3ENR_QSPIEN))
|
|
|
|
/** @brief Enable or disable the Low Speed APB (APB1) peripheral clock.
|
|
* @note After reset, the peripheral clock (used for registers read/write access)
|
|
* is disabled and the application software has to enable this clock before
|
|
* using it.
|
|
*/
|
|
#define __HAL_RCC_TIM2_CLK_ENABLE() do { \
|
|
__IO uint32_t tmpreg; \
|
|
SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM2EN);\
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM2EN);\
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
|
|
#define __HAL_RCC_TIM3_CLK_ENABLE() do { \
|
|
__IO uint32_t tmpreg; \
|
|
SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM3EN);\
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM3EN);\
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
|
|
#define __HAL_RCC_TIM4_CLK_ENABLE() do { \
|
|
__IO uint32_t tmpreg; \
|
|
SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM4EN);\
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM4EN);\
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
|
|
#define __HAL_RCC_TIM5_CLK_ENABLE() do { \
|
|
__IO uint32_t tmpreg; \
|
|
SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM5EN);\
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM5EN);\
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
|
|
#define __HAL_RCC_TIM6_CLK_ENABLE() do { \
|
|
__IO uint32_t tmpreg; \
|
|
SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM6EN);\
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM6EN);\
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
|
|
#define __HAL_RCC_TIM7_CLK_ENABLE() do { \
|
|
__IO uint32_t tmpreg; \
|
|
SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM7EN);\
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM7EN);\
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
|
|
#define __HAL_RCC_TIM12_CLK_ENABLE() do { \
|
|
__IO uint32_t tmpreg; \
|
|
SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM12EN);\
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM12EN);\
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
|
|
#define __HAL_RCC_TIM13_CLK_ENABLE() do { \
|
|
__IO uint32_t tmpreg; \
|
|
SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM13EN);\
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM13EN);\
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
|
|
#define __HAL_RCC_TIM14_CLK_ENABLE() do { \
|
|
__IO uint32_t tmpreg; \
|
|
SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM14EN);\
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM14EN);\
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
|
|
#define __HAL_RCC_LPTIM1_CLK_ENABLE() do { \
|
|
__IO uint32_t tmpreg; \
|
|
SET_BIT(RCC->APB1ENR, RCC_APB1ENR_LPTIM1EN);\
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_LPTIM1EN);\
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
|
|
#define __HAL_RCC_SPI2_CLK_ENABLE() do { \
|
|
__IO uint32_t tmpreg; \
|
|
SET_BIT(RCC->APB1ENR, RCC_APB1ENR_SPI2EN);\
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_SPI2EN);\
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
|
|
#define __HAL_RCC_SPI3_CLK_ENABLE() do { \
|
|
__IO uint32_t tmpreg; \
|
|
SET_BIT(RCC->APB1ENR, RCC_APB1ENR_SPI3EN);\
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_SPI3EN);\
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
|
|
#define __HAL_RCC_SPDIFRX_CLK_ENABLE() do { \
|
|
__IO uint32_t tmpreg; \
|
|
SET_BIT(RCC->APB1ENR, RCC_APB1ENR_SPDIFRXEN);\
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_SPDIFRXEN);\
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
|
|
#define __HAL_RCC_USART2_CLK_ENABLE() do { \
|
|
__IO uint32_t tmpreg; \
|
|
SET_BIT(RCC->APB1ENR, RCC_APB1ENR_USART2EN);\
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_USART2EN);\
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
|
|
#define __HAL_RCC_USART3_CLK_ENABLE() do { \
|
|
__IO uint32_t tmpreg; \
|
|
SET_BIT(RCC->APB1ENR, RCC_APB1ENR_USART3EN);\
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_USART3EN);\
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
|
|
#define __HAL_RCC_UART4_CLK_ENABLE() do { \
|
|
__IO uint32_t tmpreg; \
|
|
SET_BIT(RCC->APB1ENR, RCC_APB1ENR_UART4EN);\
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_UART4EN);\
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
|
|
#define __HAL_RCC_UART5_CLK_ENABLE() do { \
|
|
__IO uint32_t tmpreg; \
|
|
SET_BIT(RCC->APB1ENR, RCC_APB1ENR_UART5EN);\
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_UART5EN);\
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
|
|
#define __HAL_RCC_I2C1_CLK_ENABLE() do { \
|
|
__IO uint32_t tmpreg; \
|
|
SET_BIT(RCC->APB1ENR, RCC_APB1ENR_I2C1EN);\
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_I2C1EN);\
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
|
|
#define __HAL_RCC_I2C2_CLK_ENABLE() do { \
|
|
__IO uint32_t tmpreg; \
|
|
SET_BIT(RCC->APB1ENR, RCC_APB1ENR_I2C2EN);\
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_I2C2EN);\
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
|
|
#define __HAL_RCC_I2C3_CLK_ENABLE() do { \
|
|
__IO uint32_t tmpreg; \
|
|
SET_BIT(RCC->APB1ENR, RCC_APB1ENR_I2C3EN);\
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_I2C3EN);\
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
|
|
#define __HAL_RCC_I2C4_CLK_ENABLE() do { \
|
|
__IO uint32_t tmpreg; \
|
|
SET_BIT(RCC->APB1ENR, RCC_APB1ENR_I2C4EN);\
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_I2C4EN);\
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
|
|
#define __HAL_RCC_CAN1_CLK_ENABLE() do { \
|
|
__IO uint32_t tmpreg; \
|
|
SET_BIT(RCC->APB1ENR, RCC_APB1ENR_CAN1EN);\
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_CAN1EN);\
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
|
|
#define __HAL_RCC_CAN2_CLK_ENABLE() do { \
|
|
__IO uint32_t tmpreg; \
|
|
SET_BIT(RCC->APB1ENR, RCC_APB1ENR_CAN2EN);\
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_CAN2EN);\
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
|
|
#define __HAL_RCC_CEC_CLK_ENABLE() do { \
|
|
__IO uint32_t tmpreg; \
|
|
SET_BIT(RCC->APB1ENR, RCC_APB1ENR_CECEN);\
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_CECEN);\
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
|
|
#define __HAL_RCC_DAC_CLK_ENABLE() do { \
|
|
__IO uint32_t tmpreg; \
|
|
SET_BIT(RCC->APB1ENR, RCC_APB1ENR_DACEN);\
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_DACEN);\
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
|
|
#define __HAL_RCC_UART7_CLK_ENABLE() do { \
|
|
__IO uint32_t tmpreg; \
|
|
SET_BIT(RCC->APB1ENR, RCC_APB1ENR_UART7EN);\
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_UART7EN);\
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
|
|
#define __HAL_RCC_UART8_CLK_ENABLE() do { \
|
|
__IO uint32_t tmpreg; \
|
|
SET_BIT(RCC->APB1ENR, RCC_APB1ENR_UART8EN);\
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_UART8EN);\
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
|
|
#define __HAL_RCC_TIM2_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM2EN))
|
|
#define __HAL_RCC_TIM3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM3EN))
|
|
#define __HAL_RCC_TIM4_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM4EN))
|
|
#define __HAL_RCC_TIM5_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM5EN))
|
|
#define __HAL_RCC_TIM6_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM6EN))
|
|
#define __HAL_RCC_TIM7_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM7EN))
|
|
#define __HAL_RCC_TIM12_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM12EN))
|
|
#define __HAL_RCC_TIM13_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM13EN))
|
|
#define __HAL_RCC_TIM14_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM14EN))
|
|
#define __HAL_RCC_LPTIM1_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_LPTIM1EN))
|
|
#define __HAL_RCC_SPI2_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_SPI2EN))
|
|
#define __HAL_RCC_SPI3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_SPI3EN))
|
|
#define __HAL_RCC_SPDIFRX_CLK_DISABLE()(RCC->APB1ENR &= ~(RCC_APB1ENR_SPDIFRXEN))
|
|
#define __HAL_RCC_USART2_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_USART2EN))
|
|
#define __HAL_RCC_USART3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_USART3EN))
|
|
#define __HAL_RCC_UART4_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_UART4EN))
|
|
#define __HAL_RCC_UART5_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_UART5EN))
|
|
#define __HAL_RCC_I2C1_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_I2C1EN))
|
|
#define __HAL_RCC_I2C2_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_I2C2EN))
|
|
#define __HAL_RCC_I2C3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_I2C3EN))
|
|
#define __HAL_RCC_I2C4_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_I2C4EN))
|
|
#define __HAL_RCC_CAN1_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_CAN1EN))
|
|
#define __HAL_RCC_CAN2_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_CAN2EN))
|
|
#define __HAL_RCC_CEC_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_CECEN))
|
|
#define __HAL_RCC_DAC_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_DACEN))
|
|
#define __HAL_RCC_UART7_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_UART7EN))
|
|
#define __HAL_RCC_UART8_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_UART8EN))
|
|
|
|
/** @brief Enable or disable the High Speed APB (APB2) peripheral clock.
|
|
* @note After reset, the peripheral clock (used for registers read/write access)
|
|
* is disabled and the application software has to enable this clock before
|
|
* using it.
|
|
*/
|
|
#define __HAL_RCC_TIM1_CLK_ENABLE() do { \
|
|
__IO uint32_t tmpreg; \
|
|
SET_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM1EN);\
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM1EN);\
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
|
|
#define __HAL_RCC_TIM8_CLK_ENABLE() do { \
|
|
__IO uint32_t tmpreg; \
|
|
SET_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM8EN);\
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM8EN);\
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
|
|
#define __HAL_RCC_USART1_CLK_ENABLE() do { \
|
|
__IO uint32_t tmpreg; \
|
|
SET_BIT(RCC->APB2ENR, RCC_APB2ENR_USART1EN);\
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_USART1EN);\
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
|
|
#define __HAL_RCC_USART6_CLK_ENABLE() do { \
|
|
__IO uint32_t tmpreg; \
|
|
SET_BIT(RCC->APB2ENR, RCC_APB2ENR_USART6EN);\
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_USART6EN);\
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
|
|
#define __HAL_RCC_ADC1_CLK_ENABLE() do { \
|
|
__IO uint32_t tmpreg; \
|
|
SET_BIT(RCC->APB2ENR, RCC_APB2ENR_ADC1EN);\
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_ADC1EN);\
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
|
|
#define __HAL_RCC_ADC2_CLK_ENABLE() do { \
|
|
__IO uint32_t tmpreg; \
|
|
SET_BIT(RCC->APB2ENR, RCC_APB2ENR_ADC2EN);\
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_ADC2EN);\
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
|
|
#define __HAL_RCC_ADC3_CLK_ENABLE() do { \
|
|
__IO uint32_t tmpreg; \
|
|
SET_BIT(RCC->APB2ENR, RCC_APB2ENR_ADC3EN);\
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_ADC3EN);\
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
|
|
#define __HAL_RCC_SDMMC1_CLK_ENABLE() do { \
|
|
__IO uint32_t tmpreg; \
|
|
SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SDMMC1EN);\
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SDMMC1EN);\
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
|
|
#define __HAL_RCC_SPI1_CLK_ENABLE() do { \
|
|
__IO uint32_t tmpreg; \
|
|
SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI1EN);\
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI1EN);\
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
|
|
#define __HAL_RCC_SPI4_CLK_ENABLE() do { \
|
|
__IO uint32_t tmpreg; \
|
|
SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI4EN);\
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI4EN);\
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
|
|
#define __HAL_RCC_TIM9_CLK_ENABLE() do { \
|
|
__IO uint32_t tmpreg; \
|
|
SET_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM9EN);\
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM9EN);\
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
|
|
#define __HAL_RCC_TIM10_CLK_ENABLE() do { \
|
|
__IO uint32_t tmpreg; \
|
|
SET_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM10EN);\
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM10EN);\
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
|
|
#define __HAL_RCC_TIM11_CLK_ENABLE() do { \
|
|
__IO uint32_t tmpreg; \
|
|
SET_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM11EN);\
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM11EN);\
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
|
|
#define __HAL_RCC_SPI5_CLK_ENABLE() do { \
|
|
__IO uint32_t tmpreg; \
|
|
SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI5EN);\
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI5EN);\
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
|
|
#define __HAL_RCC_SPI6_CLK_ENABLE() do { \
|
|
__IO uint32_t tmpreg; \
|
|
SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI6EN);\
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI6EN);\
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
|
|
#define __HAL_RCC_SAI1_CLK_ENABLE() do { \
|
|
__IO uint32_t tmpreg; \
|
|
SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SAI1EN);\
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SAI1EN);\
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
|
|
#define __HAL_RCC_SAI2_CLK_ENABLE() do { \
|
|
__IO uint32_t tmpreg; \
|
|
SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SAI2EN);\
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SAI2EN);\
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
|
|
#if defined(STM32F756xx) || defined(STM32F746xx)
|
|
#define __HAL_RCC_LTDC_CLK_ENABLE() do { \
|
|
__IO uint32_t tmpreg; \
|
|
SET_BIT(RCC->APB2ENR, RCC_APB2ENR_LTDCEN);\
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_LTDCEN);\
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
#endif /* STM32F756xx || STM32F746xx */
|
|
|
|
#define __HAL_RCC_TIM1_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_TIM1EN))
|
|
#define __HAL_RCC_TIM8_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_TIM8EN))
|
|
#define __HAL_RCC_USART1_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_USART1EN))
|
|
#define __HAL_RCC_USART6_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_USART6EN))
|
|
#define __HAL_RCC_ADC1_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_ADC1EN))
|
|
#define __HAL_RCC_ADC2_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_ADC2EN))
|
|
#define __HAL_RCC_ADC3_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_ADC3EN))
|
|
#define __HAL_RCC_SDMMC1_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SDMMC1EN))
|
|
#define __HAL_RCC_SPI1_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SPI1EN))
|
|
#define __HAL_RCC_SPI4_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SPI4EN))
|
|
#define __HAL_RCC_TIM9_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_TIM9EN))
|
|
#define __HAL_RCC_TIM10_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_TIM10EN))
|
|
#define __HAL_RCC_TIM11_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_TIM11EN))
|
|
#define __HAL_RCC_SPI5_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SPI5EN))
|
|
#define __HAL_RCC_SPI6_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SPI6EN))
|
|
#define __HAL_RCC_SAI1_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SAI1EN))
|
|
#define __HAL_RCC_SAI2_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SAI2EN))
|
|
#if defined(STM32F756xx) || defined(STM32F746xx)
|
|
#define __HAL_RCC_LTDC_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_LTDCEN))
|
|
#endif /* STM32F756xx || STM32F746xx */
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
|
|
/** @defgroup RCCEx_Peripheral_Clock_Enable_Disable_Status Peripheral Clock Enable Disable Status
|
|
* @brief Get the enable or disable status of the AHB/APB peripheral clock.
|
|
* @note After reset, the peripheral clock (used for registers read/write access)
|
|
* is disabled and the application software has to enable this clock before
|
|
* using it.
|
|
* @{
|
|
*/
|
|
|
|
/** @brief Get the enable or disable status of the AHB1 peripheral clock.
|
|
* @note After reset, the peripheral clock (used for registers read/write access)
|
|
* is disabled and the application software has to enable this clock before
|
|
* using it.
|
|
*/
|
|
#define __HAL_RCC_BKPSRAM_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_BKPSRAMEN)) != RESET)
|
|
#define __HAL_RCC_DTCMRAMEN_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_DTCMRAMEN)) != RESET)
|
|
#define __HAL_RCC_DMA2_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_DMA2EN)) != RESET)
|
|
#define __HAL_RCC_DMA2D_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_DMA2DEN)) != RESET)
|
|
#define __HAL_RCC_USB_OTG_HS_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_OTGHSEN)) != RESET)
|
|
#define __HAL_RCC_USB_OTG_HS_ULPI_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_OTGHSULPIEN)) != RESET)
|
|
#define __HAL_RCC_GPIOA_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOAEN)) != RESET)
|
|
#define __HAL_RCC_GPIOB_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOBEN)) != RESET)
|
|
#define __HAL_RCC_GPIOC_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOCEN)) != RESET)
|
|
#define __HAL_RCC_GPIOD_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIODEN)) != RESET)
|
|
#define __HAL_RCC_GPIOE_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOEEN)) != RESET)
|
|
#define __HAL_RCC_GPIOF_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOFEN)) != RESET)
|
|
#define __HAL_RCC_GPIOG_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOGEN)) != RESET)
|
|
#define __HAL_RCC_GPIOH_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOHEN)) != RESET)
|
|
#define __HAL_RCC_GPIOI_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOIEN)) != RESET)
|
|
#define __HAL_RCC_GPIOJ_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOJEN)) != RESET)
|
|
#define __HAL_RCC_GPIOK_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOKEN)) != RESET)
|
|
|
|
#define __HAL_RCC_BKPSRAM_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_BKPSRAMEN)) == RESET)
|
|
#define __HAL_RCC_DTCMRAMEN_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_DTCMRAMEN)) == RESET)
|
|
#define __HAL_RCC_DMA2_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_DMA2EN)) == RESET)
|
|
#define __HAL_RCC_DMA2D_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_DMA2DEN)) == RESET)
|
|
#define __HAL_RCC_USB_OTG_HS_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_OTGHSEN)) == RESET)
|
|
#define __HAL_RCC_USB_OTG_HS_ULPI_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_OTGHSULPIEN)) == RESET)
|
|
#define __HAL_RCC_GPIOA_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOAEN)) == RESET)
|
|
#define __HAL_RCC_GPIOB_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOBEN)) == RESET)
|
|
#define __HAL_RCC_GPIOC_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOCEN)) == RESET)
|
|
#define __HAL_RCC_GPIOD_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIODEN)) == RESET)
|
|
#define __HAL_RCC_GPIOE_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOEEN)) == RESET)
|
|
#define __HAL_RCC_GPIOF_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOFEN)) == RESET)
|
|
#define __HAL_RCC_GPIOG_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOGEN)) == RESET)
|
|
#define __HAL_RCC_GPIOH_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOHEN)) == RESET)
|
|
#define __HAL_RCC_GPIOI_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOIEN)) == RESET)
|
|
#define __HAL_RCC_GPIOJ_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOJEN)) == RESET)
|
|
#define __HAL_RCC_GPIOK_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOKEN)) == RESET)
|
|
/**
|
|
* @brief Enable ETHERNET clock.
|
|
*/
|
|
#define __HAL_RCC_ETHMAC_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_ETHMACEN)) != RESET)
|
|
#define __HAL_RCC_ETHMACTX_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_ETHMACTXEN)) != RESET)
|
|
#define __HAL_RCC_ETHMACRX_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_ETHMACRXEN)) != RESET)
|
|
#define __HAL_RCC_ETHMACPTP_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_ETHMACPTPEN)) != RESET)
|
|
#define __HAL_RCC_ETH_IS_CLK_ENABLED() (__HAL_RCC_ETHMAC_IS_CLK_ENABLED() && \
|
|
__HAL_RCC_ETHMACTX_IS_CLK_ENABLED() && \
|
|
__HAL_RCC_ETHMACRX_IS_CLK_ENABLED())
|
|
|
|
/**
|
|
* @brief Disable ETHERNET clock.
|
|
*/
|
|
#define __HAL_RCC_ETHMAC_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_ETHMACEN)) == RESET)
|
|
#define __HAL_RCC_ETHMACTX_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_ETHMACTXEN)) == RESET)
|
|
#define __HAL_RCC_ETHMACRX_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_ETHMACRXEN)) == RESET)
|
|
#define __HAL_RCC_ETHMACPTP_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_ETHMACPTPEN)) == RESET)
|
|
#define __HAL_RCC_ETH_IS_CLK_DISABLED() (__HAL_RCC_ETHMAC_IS_CLK_DISABLED() && \
|
|
__HAL_RCC_ETHMACTX_IS_CLK_DISABLED() && \
|
|
__HAL_RCC_ETHMACRX_IS_CLK_DISABLED())
|
|
|
|
/** @brief Get the enable or disable status of the AHB2 peripheral clock.
|
|
* @note After reset, the peripheral clock (used for registers read/write access)
|
|
* is disabled and the application software has to enable this clock before
|
|
* using it.
|
|
*/
|
|
#define __HAL_RCC_DCMI_IS_CLK_ENABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_DCMIEN)) != RESET)
|
|
#define __HAL_RCC_RNG_IS_CLK_ENABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_RNGEN)) != RESET)
|
|
#define __HAL_RCC_USB_OTG_FS_IS_CLK_ENABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_OTGFSEN)) != RESET)
|
|
|
|
|
|
#define __HAL_RCC_DCMI_IS_CLK_DISABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_DCMIEN)) == RESET)
|
|
#define __HAL_RCC_RNG_IS_CLK_DISABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_RNGEN)) == RESET)
|
|
#define __HAL_RCC_USB_IS_OTG_FS_CLK_DISABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_OTGFSEN)) == RESET)
|
|
|
|
#if defined(STM32F756xx)
|
|
#define __HAL_RCC_CRYP_IS_CLK_ENABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_CRYPEN)) != RESET)
|
|
#define __HAL_RCC_HASH_IS_CLK_ENABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_HASHEN)) != RESET)
|
|
#define __HAL_RCC_CRYP_IS_CLK_DISABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_CRYPEN)) == RESET)
|
|
#define __HAL_RCC_HASH_IS_CLK_DISABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_HASHEN)) == RESET)
|
|
#endif /* STM32F756x */
|
|
|
|
/** @brief Get the enable or disable status of the AHB3 peripheral clock.
|
|
* @note After reset, the peripheral clock (used for registers read/write access)
|
|
* is disabled and the application software has to enable this clock before
|
|
* using it.
|
|
*/
|
|
#define __HAL_RCC_FMC_IS_CLK_ENABLED() ((RCC->AHB3ENR & (RCC_AHB3ENR_FMCEN)) != RESET)
|
|
#define __HAL_RCC_QSPI_IS_CLK_ENABLED() ((RCC->AHB3ENR & (RCC_AHB3ENR_QSPIEN)) != RESET)
|
|
|
|
#define __HAL_RCC_FMC_IS_CLK_DISABLED() ((RCC->AHB3ENR & (RCC_AHB3ENR_FMCEN)) == RESET)
|
|
#define __HAL_RCC_QSPI_IS_CLK_DISABLED() ((RCC->AHB3ENR & (RCC_AHB3ENR_QSPIEN)) == RESET)
|
|
|
|
/** @brief Get the enable or disable status of the APB1 peripheral clock.
|
|
* @note After reset, the peripheral clock (used for registers read/write access)
|
|
* is disabled and the application software has to enable this clock before
|
|
* using it.
|
|
*/
|
|
#define __HAL_RCC_TIM2_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM2EN)) != RESET)
|
|
#define __HAL_RCC_TIM3_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM3EN)) != RESET)
|
|
#define __HAL_RCC_TIM4_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM4EN)) != RESET)
|
|
#define __HAL_RCC_TIM5_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM5EN)) != RESET)
|
|
#define __HAL_RCC_TIM6_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM6EN)) != RESET)
|
|
#define __HAL_RCC_TIM7_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM7EN)) != RESET)
|
|
#define __HAL_RCC_TIM12_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM12EN)) != RESET)
|
|
#define __HAL_RCC_TIM13_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM13EN)) != RESET)
|
|
#define __HAL_RCC_TIM14_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM14EN)) != RESET)
|
|
#define __HAL_RCC_LPTIM1_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_LPTIM1EN)) != RESET)
|
|
#define __HAL_RCC_SPI2_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_SPI2EN)) != RESET)
|
|
#define __HAL_RCC_SPI3_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_SPI3EN)) != RESET)
|
|
#define __HAL_RCC_SPDIFRX_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_SPDIFRXEN)) != RESET)
|
|
#define __HAL_RCC_USART2_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_USART2EN)) != RESET)
|
|
#define __HAL_RCC_USART3_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_USART3EN)) != RESET)
|
|
#define __HAL_RCC_UART4_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_UART4EN)) != RESET)
|
|
#define __HAL_RCC_UART5_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_UART5EN)) != RESET)
|
|
#define __HAL_RCC_I2C1_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_I2C1EN)) != RESET)
|
|
#define __HAL_RCC_I2C2_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_I2C2EN)) != RESET)
|
|
#define __HAL_RCC_I2C3_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_I2C3EN)) != RESET)
|
|
#define __HAL_RCC_I2C4_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_I2C4EN)) != RESET)
|
|
#define __HAL_RCC_CAN1_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_CAN1EN)) != RESET)
|
|
#define __HAL_RCC_CAN2_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_CAN2EN)) != RESET)
|
|
#define __HAL_RCC_CEC_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_CECEN)) != RESET)
|
|
#define __HAL_RCC_DAC_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_DACEN)) != RESET)
|
|
#define __HAL_RCC_UART7_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_UART7EN)) != RESET)
|
|
#define __HAL_RCC_UART8_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_UART8EN)) != RESET)
|
|
|
|
#define __HAL_RCC_TIM2_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM2EN)) == RESET)
|
|
#define __HAL_RCC_TIM3_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM3EN)) == RESET)
|
|
#define __HAL_RCC_TIM4_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM4EN)) == RESET)
|
|
#define __HAL_RCC_TIM5_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM5EN)) == RESET)
|
|
#define __HAL_RCC_TIM6_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM6EN)) == RESET)
|
|
#define __HAL_RCC_TIM7_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM7EN)) == RESET)
|
|
#define __HAL_RCC_TIM12_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM12EN)) == RESET)
|
|
#define __HAL_RCC_TIM13_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM13EN)) == RESET)
|
|
#define __HAL_RCC_TIM14_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM14EN)) == RESET)
|
|
#define __HAL_RCC_LPTIM1_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_LPTIM1EN)) == RESET)
|
|
#define __HAL_RCC_SPI2_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_SPI2EN)) == RESET)
|
|
#define __HAL_RCC_SPI3_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_SPI3EN)) == RESET)
|
|
#define __HAL_RCC_SPDIFRX_IS_CLK_DISABLED()((RCC->APB1ENR & (RCC_APB1ENR_SPDIFRXEN)) == RESET)
|
|
#define __HAL_RCC_USART2_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_USART2EN)) == RESET)
|
|
#define __HAL_RCC_USART3_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_USART3EN)) == RESET)
|
|
#define __HAL_RCC_UART4_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_UART4EN)) == RESET)
|
|
#define __HAL_RCC_UART5_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_UART5EN)) == RESET)
|
|
#define __HAL_RCC_I2C1_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_I2C1EN)) == RESET)
|
|
#define __HAL_RCC_I2C2_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_I2C2EN)) == RESET)
|
|
#define __HAL_RCC_I2C3_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_I2C3EN)) == RESET)
|
|
#define __HAL_RCC_I2C4_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_I2C4EN)) == RESET)
|
|
#define __HAL_RCC_CAN1_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_CAN1EN)) == RESET)
|
|
#define __HAL_RCC_CAN2_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_CAN2EN)) == RESET)
|
|
#define __HAL_RCC_CEC_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_CECEN)) == RESET)
|
|
#define __HAL_RCC_DAC_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_DACEN)) == RESET)
|
|
#define __HAL_RCC_UART7_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_UART7EN)) == RESET)
|
|
#define __HAL_RCC_UART8_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_UART8EN)) == RESET)
|
|
|
|
/** @brief Get the enable or disable status of the APB2 peripheral clock.
|
|
* @note After reset, the peripheral clock (used for registers read/write access)
|
|
* is disabled and the application software has to enable this clock before
|
|
* using it.
|
|
*/
|
|
#define __HAL_RCC_TIM1_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM1EN)) != RESET)
|
|
#define __HAL_RCC_TIM8_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM8EN)) != RESET)
|
|
#define __HAL_RCC_USART1_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_USART1EN)) != RESET)
|
|
#define __HAL_RCC_USART6_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_USART6EN)) != RESET)
|
|
#define __HAL_RCC_ADC1_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_ADC1EN)) != RESET)
|
|
#define __HAL_RCC_ADC2_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_ADC2EN)) != RESET)
|
|
#define __HAL_RCC_ADC3_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_ADC3EN)) != RESET)
|
|
#define __HAL_RCC_SDMMC1_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SDMMC1EN)) != RESET)
|
|
#define __HAL_RCC_SPI1_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SPI1EN)) != RESET)
|
|
#define __HAL_RCC_SPI4_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SPI4EN)) != RESET)
|
|
#define __HAL_RCC_TIM9_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM9EN)) != RESET)
|
|
#define __HAL_RCC_TIM10_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM10EN)) != RESET)
|
|
#define __HAL_RCC_TIM11_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM11EN)) != RESET)
|
|
#define __HAL_RCC_SPI5_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SPI5EN)) != RESET)
|
|
#define __HAL_RCC_SPI6_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SPI6EN)) != RESET)
|
|
#define __HAL_RCC_SAI1_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SAI1EN)) != RESET)
|
|
#define __HAL_RCC_SAI2_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SAI2EN)) != RESET)
|
|
#if defined(STM32F756xx) || defined(STM32F746xx)
|
|
#define __HAL_RCC_LTDC_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_LTDCEN)) != RESET)
|
|
#endif /* STM32F756xx || STM32F746xx */
|
|
#define __HAL_RCC_TIM1_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM1EN)) == RESET)
|
|
#define __HAL_RCC_TIM8_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM8EN)) == RESET)
|
|
#define __HAL_RCC_USART1_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_USART1EN)) == RESET)
|
|
#define __HAL_RCC_USART6_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_USART6EN)) == RESET)
|
|
#define __HAL_RCC_ADC1_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_ADC1EN)) == RESET)
|
|
#define __HAL_RCC_ADC2_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_ADC2EN)) == RESET)
|
|
#define __HAL_RCC_ADC3_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_ADC3EN)) == RESET)
|
|
#define __HAL_RCC_SDMMC1_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SDMMC1EN)) == RESET)
|
|
#define __HAL_RCC_SPI1_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SPI1EN)) == RESET)
|
|
#define __HAL_RCC_SPI4_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SPI4EN)) == RESET)
|
|
#define __HAL_RCC_TIM9_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM9EN)) == RESET)
|
|
#define __HAL_RCC_TIM10_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM10EN)) == RESET)
|
|
#define __HAL_RCC_TIM11_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM11EN)) == RESET)
|
|
#define __HAL_RCC_SPI5_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SPI5EN)) == RESET)
|
|
#define __HAL_RCC_SPI6_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SPI6EN)) == RESET)
|
|
#define __HAL_RCC_SAI1_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SAI1EN)) == RESET)
|
|
#define __HAL_RCC_SAI2_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SAI2EN)) == RESET)
|
|
#if defined(STM32F756xx) || defined(STM32F746xx)
|
|
#define __HAL_RCC_LTDC_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_LTDCEN)) == RESET)
|
|
#endif /* STM32F756xx || STM32F746xx */
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RCCEx_Force_Release_Peripheral_Reset RCCEx Force Release Peripheral Reset
|
|
* @brief Forces or releases AHB/APB peripheral reset.
|
|
* @{
|
|
*/
|
|
|
|
/** @brief Force or release AHB1 peripheral reset.
|
|
*/
|
|
#define __HAL_RCC_DMA2_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_DMA2RST))
|
|
#define __HAL_RCC_DMA2D_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_DMA2DRST))
|
|
#define __HAL_RCC_ETHMAC_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_ETHMACRST))
|
|
#define __HAL_RCC_USB_OTG_HS_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_OTGHRST))
|
|
#define __HAL_RCC_GPIOA_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOARST))
|
|
#define __HAL_RCC_GPIOB_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOBRST))
|
|
#define __HAL_RCC_GPIOC_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOCRST))
|
|
#define __HAL_RCC_GPIOD_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIODRST))
|
|
#define __HAL_RCC_GPIOE_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOERST))
|
|
#define __HAL_RCC_GPIOF_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOFRST))
|
|
#define __HAL_RCC_GPIOG_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOGRST))
|
|
#define __HAL_RCC_GPIOH_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOHRST))
|
|
#define __HAL_RCC_GPIOI_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOIRST))
|
|
#define __HAL_RCC_GPIOJ_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOJRST))
|
|
#define __HAL_RCC_GPIOK_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOKRST))
|
|
|
|
#define __HAL_RCC_DMA2_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_DMA2RST))
|
|
#define __HAL_RCC_DMA2D_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_DMA2DRST))
|
|
#define __HAL_RCC_ETHMAC_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_ETHMACRST))
|
|
#define __HAL_RCC_USB_OTG_HS_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_OTGHRST))
|
|
#define __HAL_RCC_GPIOA_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOARST))
|
|
#define __HAL_RCC_GPIOB_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOBRST))
|
|
#define __HAL_RCC_GPIOC_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOCRST))
|
|
#define __HAL_RCC_GPIOD_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIODRST))
|
|
#define __HAL_RCC_GPIOE_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOERST))
|
|
#define __HAL_RCC_GPIOF_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOFRST))
|
|
#define __HAL_RCC_GPIOG_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOGRST))
|
|
#define __HAL_RCC_GPIOH_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOHRST))
|
|
#define __HAL_RCC_GPIOI_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOIRST))
|
|
#define __HAL_RCC_GPIOJ_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOJRST))
|
|
#define __HAL_RCC_GPIOK_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOKRST))
|
|
|
|
/** @brief Force or release AHB2 peripheral reset.
|
|
*/
|
|
#define __HAL_RCC_AHB2_FORCE_RESET() (RCC->AHB2RSTR = 0xFFFFFFFF)
|
|
#define __HAL_RCC_DCMI_FORCE_RESET() (RCC->AHB2RSTR |= (RCC_AHB2RSTR_DCMIRST))
|
|
|
|
#define __HAL_RCC_RNG_FORCE_RESET() (RCC->AHB2RSTR |= (RCC_AHB2RSTR_RNGRST))
|
|
#define __HAL_RCC_USB_OTG_FS_FORCE_RESET() (RCC->AHB2RSTR |= (RCC_AHB2RSTR_OTGFSRST))
|
|
|
|
#define __HAL_RCC_AHB2_RELEASE_RESET() (RCC->AHB2RSTR = 0x00)
|
|
#define __HAL_RCC_DCMI_RELEASE_RESET() (RCC->AHB2RSTR &= ~(RCC_AHB2RSTR_DCMIRST))
|
|
#define __HAL_RCC_RNG_RELEASE_RESET() (RCC->AHB2RSTR &= ~(RCC_AHB2RSTR_RNGRST))
|
|
#define __HAL_RCC_USB_OTG_FS_RELEASE_RESET() (RCC->AHB2RSTR &= ~(RCC_AHB2RSTR_OTGFSRST))
|
|
|
|
#if defined(STM32F756xx)
|
|
#define __HAL_RCC_CRYP_FORCE_RESET() (RCC->AHB2RSTR |= (RCC_AHB2RSTR_CRYPRST))
|
|
#define __HAL_RCC_HASH_FORCE_RESET() (RCC->AHB2RSTR |= (RCC_AHB2RSTR_HASHRST))
|
|
#define __HAL_RCC_CRYP_RELEASE_RESET() (RCC->AHB2RSTR &= ~(RCC_AHB2RSTR_CRYPRST))
|
|
#define __HAL_RCC_HASH_RELEASE_RESET() (RCC->AHB2RSTR &= ~(RCC_AHB2RSTR_HASHRST))
|
|
#endif /* STM32F756xx */
|
|
|
|
/** @brief Force or release AHB3 peripheral reset
|
|
*/
|
|
#define __HAL_RCC_AHB3_FORCE_RESET() (RCC->AHB3RSTR = 0xFFFFFFFF)
|
|
#define __HAL_RCC_FMC_FORCE_RESET() (RCC->AHB3RSTR |= (RCC_AHB3RSTR_FMCRST))
|
|
#define __HAL_RCC_QSPI_FORCE_RESET() (RCC->AHB3RSTR |= (RCC_AHB3RSTR_QSPIRST))
|
|
|
|
#define __HAL_RCC_AHB3_RELEASE_RESET() (RCC->AHB3RSTR = 0x00)
|
|
#define __HAL_RCC_FMC_RELEASE_RESET() (RCC->AHB3RSTR &= ~(RCC_AHB3RSTR_FMCRST))
|
|
#define __HAL_RCC_QSPI_RELEASE_RESET() (RCC->AHB3RSTR &= ~(RCC_AHB3RSTR_QSPIRST))
|
|
|
|
/** @brief Force or release APB1 peripheral reset.
|
|
*/
|
|
#define __HAL_RCC_TIM2_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM2RST))
|
|
#define __HAL_RCC_TIM3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM3RST))
|
|
#define __HAL_RCC_TIM4_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM4RST))
|
|
#define __HAL_RCC_TIM5_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM5RST))
|
|
#define __HAL_RCC_TIM6_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM6RST))
|
|
#define __HAL_RCC_TIM7_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM7RST))
|
|
#define __HAL_RCC_TIM12_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM12RST))
|
|
#define __HAL_RCC_TIM13_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM13RST))
|
|
#define __HAL_RCC_TIM14_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM14RST))
|
|
#define __HAL_RCC_LPTIM1_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_LPTIM1RST))
|
|
#define __HAL_RCC_SPI2_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_SPI2RST))
|
|
#define __HAL_RCC_SPI3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_SPI3RST))
|
|
#define __HAL_RCC_SPDIFRX_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_SPDIFRXRST))
|
|
#define __HAL_RCC_USART2_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_USART2RST))
|
|
#define __HAL_RCC_USART3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_USART3RST))
|
|
#define __HAL_RCC_UART4_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_UART4RST))
|
|
#define __HAL_RCC_UART5_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_UART5RST))
|
|
#define __HAL_RCC_I2C1_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_I2C1RST))
|
|
#define __HAL_RCC_I2C2_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_I2C2RST))
|
|
#define __HAL_RCC_I2C3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_I2C3RST))
|
|
#define __HAL_RCC_I2C4_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_I2C4RST))
|
|
#define __HAL_RCC_CAN1_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_CAN1RST))
|
|
#define __HAL_RCC_CAN2_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_CAN2RST))
|
|
#define __HAL_RCC_CEC_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_CECRST))
|
|
#define __HAL_RCC_DAC_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_DACRST))
|
|
#define __HAL_RCC_UART7_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_UART7RST))
|
|
#define __HAL_RCC_UART8_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_UART8RST))
|
|
|
|
#define __HAL_RCC_TIM2_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM2RST))
|
|
#define __HAL_RCC_TIM3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM3RST))
|
|
#define __HAL_RCC_TIM4_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM4RST))
|
|
#define __HAL_RCC_TIM5_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM5RST))
|
|
#define __HAL_RCC_TIM6_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM6RST))
|
|
#define __HAL_RCC_TIM7_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM7RST))
|
|
#define __HAL_RCC_TIM12_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM12RST))
|
|
#define __HAL_RCC_TIM13_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM13RST))
|
|
#define __HAL_RCC_TIM14_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM14RST))
|
|
#define __HAL_RCC_LPTIM1_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_LPTIM1RST))
|
|
#define __HAL_RCC_SPI2_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_SPI2RST))
|
|
#define __HAL_RCC_SPI3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_SPI3RST))
|
|
#define __HAL_RCC_SPDIFRX_RELEASE_RESET()(RCC->APB1RSTR &= ~(RCC_APB1RSTR_SPDIFRXRST))
|
|
#define __HAL_RCC_USART2_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_USART2RST))
|
|
#define __HAL_RCC_USART3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_USART3RST))
|
|
#define __HAL_RCC_UART4_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_UART4RST))
|
|
#define __HAL_RCC_UART5_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_UART5RST))
|
|
#define __HAL_RCC_I2C1_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_I2C1RST))
|
|
#define __HAL_RCC_I2C2_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_I2C2RST))
|
|
#define __HAL_RCC_I2C3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_I2C3RST))
|
|
#define __HAL_RCC_I2C4_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_I2C4RST))
|
|
#define __HAL_RCC_CAN1_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_CAN1RST))
|
|
#define __HAL_RCC_CAN2_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_CAN2RST))
|
|
#define __HAL_RCC_CEC_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_CECRST))
|
|
#define __HAL_RCC_DAC_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_DACRST))
|
|
#define __HAL_RCC_UART7_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_UART7RST))
|
|
#define __HAL_RCC_UART8_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_UART8RST))
|
|
|
|
/** @brief Force or release APB2 peripheral reset.
|
|
*/
|
|
#define __HAL_RCC_TIM1_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM1RST))
|
|
#define __HAL_RCC_TIM8_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM8RST))
|
|
#define __HAL_RCC_USART1_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_USART1RST))
|
|
#define __HAL_RCC_USART6_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_USART6RST))
|
|
#define __HAL_RCC_ADC_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_ADCRST))
|
|
#define __HAL_RCC_SDMMC1_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SDMMC1RST))
|
|
#define __HAL_RCC_SPI1_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SPI1RST))
|
|
#define __HAL_RCC_SPI4_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SPI4RST))
|
|
#define __HAL_RCC_TIM9_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM9RST))
|
|
#define __HAL_RCC_TIM10_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM10RST))
|
|
#define __HAL_RCC_TIM11_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM11RST))
|
|
#define __HAL_RCC_SPI5_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SPI5RST))
|
|
#define __HAL_RCC_SPI6_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SPI6RST))
|
|
#define __HAL_RCC_SAI1_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SAI1RST))
|
|
#define __HAL_RCC_SAI2_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SAI2RST))
|
|
#if defined(STM32F756xx) || defined(STM32F746xx)
|
|
#define __HAL_RCC_LTDC_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_LTDCRST))
|
|
#endif /* STM32F756xx || STM32F746xx */
|
|
|
|
#define __HAL_RCC_TIM1_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_TIM1RST))
|
|
#define __HAL_RCC_TIM8_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_TIM8RST))
|
|
#define __HAL_RCC_USART1_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_USART1RST))
|
|
#define __HAL_RCC_USART6_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_USART6RST))
|
|
#define __HAL_RCC_ADC_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_ADCRST))
|
|
#define __HAL_RCC_SDMMC1_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SDMMC1RST))
|
|
#define __HAL_RCC_SPI1_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SPI1RST))
|
|
#define __HAL_RCC_SPI4_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SPI4RST))
|
|
#define __HAL_RCC_TIM9_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_TIM9RST))
|
|
#define __HAL_RCC_TIM10_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_TIM10RST))
|
|
#define __HAL_RCC_TIM11_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_TIM11RST))
|
|
#define __HAL_RCC_SPI5_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SPI5RST))
|
|
#define __HAL_RCC_SPI6_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SPI6RST))
|
|
#define __HAL_RCC_SAI1_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SAI1RST))
|
|
#define __HAL_RCC_SAI2_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SAI2RST))
|
|
#if defined(STM32F756xx) || defined(STM32F746xx)
|
|
#define __HAL_RCC_LTDC_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_LTDCRST))
|
|
#endif /* STM32F756xx || STM32F746xx */
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RCCEx_Peripheral_Clock_Sleep_Enable_Disable RCCEx Peripheral Clock Sleep Enable Disable
|
|
* @brief Enables or disables the AHB/APB peripheral clock during Low Power (Sleep) mode.
|
|
* @note Peripheral clock gating in SLEEP mode can be used to further reduce
|
|
* power consumption.
|
|
* @note After wakeup from SLEEP mode, the peripheral clock is enabled again.
|
|
* @note By default, all peripheral clocks are enabled during SLEEP mode.
|
|
* @{
|
|
*/
|
|
|
|
/** @brief Enable or disable the AHB1 peripheral clock during Low Power (Sleep) mode.
|
|
*/
|
|
#define __HAL_RCC_FLITF_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_FLITFLPEN))
|
|
#define __HAL_RCC_AXI_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_AXILPEN))
|
|
#define __HAL_RCC_SRAM1_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_SRAM1LPEN))
|
|
#define __HAL_RCC_SRAM2_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_SRAM2LPEN))
|
|
#define __HAL_RCC_BKPSRAM_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_BKPSRAMLPEN))
|
|
#define __HAL_RCC_DTCM_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_DTCMLPEN))
|
|
#define __HAL_RCC_DMA2_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_DMA2LPEN))
|
|
#define __HAL_RCC_DMA2D_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_DMA2DLPEN))
|
|
#define __HAL_RCC_ETHMAC_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_ETHMACLPEN))
|
|
#define __HAL_RCC_ETHMACTX_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_ETHMACTXLPEN))
|
|
#define __HAL_RCC_ETHMACRX_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_ETHMACRXLPEN))
|
|
#define __HAL_RCC_ETHMACPTP_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_ETHMACPTPLPEN))
|
|
#define __HAL_RCC_USB_OTG_HS_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_OTGHSLPEN))
|
|
#define __HAL_RCC_USB_OTG_HS_ULPI_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_OTGHSULPILPEN))
|
|
#define __HAL_RCC_GPIOA_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOALPEN))
|
|
#define __HAL_RCC_GPIOB_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOBLPEN))
|
|
#define __HAL_RCC_GPIOC_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOCLPEN))
|
|
#define __HAL_RCC_GPIOD_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIODLPEN))
|
|
#define __HAL_RCC_GPIOE_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOELPEN))
|
|
#define __HAL_RCC_GPIOF_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOFLPEN))
|
|
#define __HAL_RCC_GPIOG_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOGLPEN))
|
|
#define __HAL_RCC_GPIOH_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOHLPEN))
|
|
#define __HAL_RCC_GPIOI_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOILPEN))
|
|
#define __HAL_RCC_GPIOJ_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOJLPEN))
|
|
#define __HAL_RCC_GPIOK_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOKLPEN))
|
|
|
|
#define __HAL_RCC_FLITF_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_FLITFLPEN))
|
|
#define __HAL_RCC_AXI_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_AXILPEN))
|
|
#define __HAL_RCC_SRAM1_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_SRAM1LPEN))
|
|
#define __HAL_RCC_SRAM2_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_SRAM2LPEN))
|
|
#define __HAL_RCC_BKPSRAM_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_BKPSRAMLPEN))
|
|
#define __HAL_RCC_DTCM_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_DTCMLPEN))
|
|
#define __HAL_RCC_DMA2_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_DMA2LPEN))
|
|
#define __HAL_RCC_DMA2D_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_DMA2DLPEN))
|
|
#define __HAL_RCC_ETHMAC_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_ETHMACLPEN))
|
|
#define __HAL_RCC_ETHMACTX_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_ETHMACTXLPEN))
|
|
#define __HAL_RCC_ETHMACRX_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_ETHMACRXLPEN))
|
|
#define __HAL_RCC_ETHMACPTP_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_ETHMACPTPLPEN))
|
|
#define __HAL_RCC_USB_OTG_HS_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_OTGHSLPEN))
|
|
#define __HAL_RCC_USB_OTG_HS_ULPI_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_OTGHSULPILPEN))
|
|
#define __HAL_RCC_GPIOA_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOALPEN))
|
|
#define __HAL_RCC_GPIOB_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOBLPEN))
|
|
#define __HAL_RCC_GPIOC_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOCLPEN))
|
|
#define __HAL_RCC_GPIOD_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIODLPEN))
|
|
#define __HAL_RCC_GPIOE_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOELPEN))
|
|
#define __HAL_RCC_GPIOF_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOFLPEN))
|
|
#define __HAL_RCC_GPIOG_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOGLPEN))
|
|
#define __HAL_RCC_GPIOH_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOHLPEN))
|
|
#define __HAL_RCC_GPIOI_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOILPEN))
|
|
#define __HAL_RCC_GPIOJ_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOJLPEN))
|
|
#define __HAL_RCC_GPIOK_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOKLPEN))
|
|
|
|
/** @brief Enable or disable the AHB2 peripheral clock during Low Power (Sleep) mode.
|
|
* @note Peripheral clock gating in SLEEP mode can be used to further reduce
|
|
* power consumption.
|
|
* @note After wakeup from SLEEP mode, the peripheral clock is enabled again.
|
|
* @note By default, all peripheral clocks are enabled during SLEEP mode.
|
|
*/
|
|
#define __HAL_RCC_DCMI_CLK_SLEEP_ENABLE() (RCC->AHB2LPENR |= (RCC_AHB2LPENR_DCMILPEN))
|
|
#define __HAL_RCC_DCMI_CLK_SLEEP_DISABLE() (RCC->AHB2LPENR &= ~(RCC_AHB2LPENR_DCMILPEN))
|
|
|
|
#define __HAL_RCC_RNG_CLK_SLEEP_ENABLE() (RCC->AHB2LPENR |= (RCC_AHB2LPENR_RNGLPEN))
|
|
#define __HAL_RCC_RNG_CLK_SLEEP_DISABLE() (RCC->AHB2LPENR &= ~(RCC_AHB2LPENR_RNGLPEN))
|
|
|
|
#define __HAL_RCC_USB_OTG_FS_CLK_SLEEP_ENABLE() (RCC->AHB2LPENR |= (RCC_AHB2LPENR_OTGFSLPEN))
|
|
#define __HAL_RCC_USB_OTG_FS_CLK_SLEEP_DISABLE() (RCC->AHB2LPENR &= ~(RCC_AHB2LPENR_OTGFSLPEN))
|
|
|
|
#if defined(STM32F756xx)
|
|
#define __HAL_RCC_CRYP_CLK_SLEEP_ENABLE() (RCC->AHB2LPENR |= (RCC_AHB2LPENR_CRYPLPEN))
|
|
#define __HAL_RCC_HASH_CLK_SLEEP_ENABLE() (RCC->AHB2LPENR |= (RCC_AHB2LPENR_HASHLPEN))
|
|
|
|
#define __HAL_RCC_CRYP_CLK_SLEEP_DISABLE() (RCC->AHB2LPENR &= ~(RCC_AHB2LPENR_CRYPLPEN))
|
|
#define __HAL_RCC_HASH_CLK_SLEEP_DISABLE() (RCC->AHB2LPENR &= ~(RCC_AHB2LPENR_HASHLPEN))
|
|
#endif /* STM32F756xx */
|
|
|
|
/** @brief Enable or disable the AHB3 peripheral clock during Low Power (Sleep) mode.
|
|
* @note Peripheral clock gating in SLEEP mode can be used to further reduce
|
|
* power consumption.
|
|
* @note After wakeup from SLEEP mode, the peripheral clock is enabled again.
|
|
* @note By default, all peripheral clocks are enabled during SLEEP mode.
|
|
*/
|
|
#define __HAL_RCC_FMC_CLK_SLEEP_ENABLE() (RCC->AHB3LPENR |= (RCC_AHB3LPENR_FMCLPEN))
|
|
#define __HAL_RCC_FMC_CLK_SLEEP_DISABLE() (RCC->AHB3LPENR &= ~(RCC_AHB3LPENR_FMCLPEN))
|
|
|
|
#define __HAL_RCC_QSPI_CLK_SLEEP_ENABLE() (RCC->AHB3LPENR |= (RCC_AHB3LPENR_QSPILPEN))
|
|
#define __HAL_RCC_QSPI_CLK_SLEEP_DISABLE() (RCC->AHB3LPENR &= ~(RCC_AHB3LPENR_QSPILPEN))
|
|
|
|
/** @brief Enable or disable the APB1 peripheral clock during Low Power (Sleep) mode.
|
|
* @note Peripheral clock gating in SLEEP mode can be used to further reduce
|
|
* power consumption.
|
|
* @note After wakeup from SLEEP mode, the peripheral clock is enabled again.
|
|
* @note By default, all peripheral clocks are enabled during SLEEP mode.
|
|
*/
|
|
#define __HAL_RCC_TIM2_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM2LPEN))
|
|
#define __HAL_RCC_TIM3_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM3LPEN))
|
|
#define __HAL_RCC_TIM4_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM4LPEN))
|
|
#define __HAL_RCC_TIM5_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM5LPEN))
|
|
#define __HAL_RCC_TIM6_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM6LPEN))
|
|
#define __HAL_RCC_TIM7_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM7LPEN))
|
|
#define __HAL_RCC_TIM12_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM12LPEN))
|
|
#define __HAL_RCC_TIM13_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM13LPEN))
|
|
#define __HAL_RCC_TIM14_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM14LPEN))
|
|
#define __HAL_RCC_LPTIM1_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_LPTIM1LPEN))
|
|
#define __HAL_RCC_SPI2_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_SPI2LPEN))
|
|
#define __HAL_RCC_SPI3_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_SPI3LPEN))
|
|
#define __HAL_RCC_SPDIFRX_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_SPDIFRXLPEN))
|
|
#define __HAL_RCC_USART2_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_USART2LPEN))
|
|
#define __HAL_RCC_USART3_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_USART3LPEN))
|
|
#define __HAL_RCC_UART4_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_UART4LPEN))
|
|
#define __HAL_RCC_UART5_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_UART5LPEN))
|
|
#define __HAL_RCC_I2C1_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_I2C1LPEN))
|
|
#define __HAL_RCC_I2C2_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_I2C2LPEN))
|
|
#define __HAL_RCC_I2C3_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_I2C3LPEN))
|
|
#define __HAL_RCC_I2C4_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_I2C4LPEN))
|
|
#define __HAL_RCC_CAN1_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_CAN1LPEN))
|
|
#define __HAL_RCC_CAN2_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_CAN2LPEN))
|
|
#define __HAL_RCC_CEC_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_CECLPEN))
|
|
#define __HAL_RCC_DAC_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_DACLPEN))
|
|
#define __HAL_RCC_UART7_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_UART7LPEN))
|
|
#define __HAL_RCC_UART8_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_UART8LPEN))
|
|
|
|
#define __HAL_RCC_TIM2_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM2LPEN))
|
|
#define __HAL_RCC_TIM3_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM3LPEN))
|
|
#define __HAL_RCC_TIM4_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM4LPEN))
|
|
#define __HAL_RCC_TIM5_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM5LPEN))
|
|
#define __HAL_RCC_TIM6_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM6LPEN))
|
|
#define __HAL_RCC_TIM7_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM7LPEN))
|
|
#define __HAL_RCC_TIM12_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM12LPEN))
|
|
#define __HAL_RCC_TIM13_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM13LPEN))
|
|
#define __HAL_RCC_TIM14_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM14LPEN))
|
|
#define __HAL_RCC_LPTIM1_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_LPTIM1LPEN))
|
|
#define __HAL_RCC_SPI2_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_SPI2LPEN))
|
|
#define __HAL_RCC_SPI3_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_SPI3LPEN))
|
|
#define __HAL_RCC_SPDIFRX_CLK_SLEEP_DISABLE()(RCC->APB1LPENR &= ~(RCC_APB1LPENR_SPDIFRXLPEN))
|
|
#define __HAL_RCC_USART2_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_USART2LPEN))
|
|
#define __HAL_RCC_USART3_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_USART3LPEN))
|
|
#define __HAL_RCC_UART4_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_UART4LPEN))
|
|
#define __HAL_RCC_UART5_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_UART5LPEN))
|
|
#define __HAL_RCC_I2C1_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_I2C1LPEN))
|
|
#define __HAL_RCC_I2C2_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_I2C2LPEN))
|
|
#define __HAL_RCC_I2C3_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_I2C3LPEN))
|
|
#define __HAL_RCC_I2C4_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_I2C4LPEN))
|
|
#define __HAL_RCC_CAN1_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_CAN1LPEN))
|
|
#define __HAL_RCC_CAN2_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_CAN2LPEN))
|
|
#define __HAL_RCC_CEC_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_CECLPEN))
|
|
#define __HAL_RCC_DAC_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_DACLPEN))
|
|
#define __HAL_RCC_UART7_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_UART7LPEN))
|
|
#define __HAL_RCC_UART8_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_UART8LPEN))
|
|
|
|
/** @brief Enable or disable the APB2 peripheral clock during Low Power (Sleep) mode.
|
|
* @note Peripheral clock gating in SLEEP mode can be used to further reduce
|
|
* power consumption.
|
|
* @note After wakeup from SLEEP mode, the peripheral clock is enabled again.
|
|
* @note By default, all peripheral clocks are enabled during SLEEP mode.
|
|
*/
|
|
#define __HAL_RCC_TIM1_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_TIM1LPEN))
|
|
#define __HAL_RCC_TIM8_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_TIM8LPEN))
|
|
#define __HAL_RCC_USART1_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_USART1LPEN))
|
|
#define __HAL_RCC_USART6_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_USART6LPEN))
|
|
#define __HAL_RCC_ADC1_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_ADC1LPEN))
|
|
#define __HAL_RCC_ADC2_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_ADC2LPEN))
|
|
#define __HAL_RCC_ADC3_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_ADC3LPEN))
|
|
#define __HAL_RCC_SDMMC1_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_SDMMC1LPEN))
|
|
#define __HAL_RCC_SPI1_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_SPI1LPEN))
|
|
#define __HAL_RCC_SPI4_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_SPI4LPEN))
|
|
#define __HAL_RCC_TIM9_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_TIM9LPEN))
|
|
#define __HAL_RCC_TIM10_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_TIM10LPEN))
|
|
#define __HAL_RCC_TIM11_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_TIM11LPEN))
|
|
#define __HAL_RCC_SPI5_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_SPI5LPEN))
|
|
#define __HAL_RCC_SPI6_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_SPI6LPEN))
|
|
#define __HAL_RCC_SAI1_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_SAI1LPEN))
|
|
#define __HAL_RCC_SAI2_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_SAI2LPEN))
|
|
#if defined(STM32F756xx) || defined(STM32F746xx)
|
|
#define __HAL_RCC_LTDC_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_LTDCLPEN))
|
|
#endif /* STM32F756xx || STM32F746xx */
|
|
|
|
#define __HAL_RCC_TIM1_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_TIM1LPEN))
|
|
#define __HAL_RCC_TIM8_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_TIM8LPEN))
|
|
#define __HAL_RCC_USART1_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_USART1LPEN))
|
|
#define __HAL_RCC_USART6_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_USART6LPEN))
|
|
#define __HAL_RCC_ADC1_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_ADC1LPEN))
|
|
#define __HAL_RCC_ADC2_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_ADC2LPEN))
|
|
#define __HAL_RCC_ADC3_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_ADC3LPEN))
|
|
#define __HAL_RCC_SDMMC1_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_SDMMC1LPEN))
|
|
#define __HAL_RCC_SPI1_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_SPI1LPEN))
|
|
#define __HAL_RCC_SPI4_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_SPI4LPEN))
|
|
#define __HAL_RCC_TIM9_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_TIM9LPEN))
|
|
#define __HAL_RCC_TIM10_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_TIM10LPEN))
|
|
#define __HAL_RCC_TIM11_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_TIM11LPEN))
|
|
#define __HAL_RCC_SPI5_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_SPI5LPEN))
|
|
#define __HAL_RCC_SPI6_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_SPI6LPEN))
|
|
#define __HAL_RCC_SAI1_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_SAI1LPEN))
|
|
#define __HAL_RCC_SAI2_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_SAI2LPEN))
|
|
#if defined(STM32F756xx) || defined(STM32F746xx)
|
|
#define __HAL_RCC_LTDC_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_LTDCLPEN))
|
|
#endif /* STM32F756xx || STM32F746xx */
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RCC_Clock_Sleep_Enable_Disable_Status AHB/APB Peripheral Clock Sleep Enable Disable Status
|
|
* @brief Get the enable or disable status of the AHB/APB peripheral clock during Low Power (Sleep) mode.
|
|
* @note Peripheral clock gating in SLEEP mode can be used to further reduce
|
|
* power consumption.
|
|
* @note After wakeup from SLEEP mode, the peripheral clock is enabled again.
|
|
* @note By default, all peripheral clocks are enabled during SLEEP mode.
|
|
* @{
|
|
*/
|
|
|
|
/** @brief Get the enable or disable status of the AHB1 peripheral clock during Low Power (Sleep) mode.
|
|
* @note Peripheral clock gating in SLEEP mode can be used to further reduce
|
|
* power consumption.
|
|
* @note After wakeup from SLEEP mode, the peripheral clock is enabled again.
|
|
* @note By default, all peripheral clocks are enabled during SLEEP mode.
|
|
*/
|
|
#define __HAL_RCC_FLITF_IS_CLK_SLEEP_ENABLED() ((RCC->AHB1LPENR & (RCC_AHB1LPENR_FLITFLPEN)) != RESET)
|
|
#define __HAL_RCC_AXI_IS_CLK_SLEEP_ENABLED() ((RCC->AHB1LPENR & (RCC_AHB1LPENR_AXILPEN)) != RESET)
|
|
#define __HAL_RCC_SRAM1_IS_CLK_SLEEP_ENABLED() ((RCC->AHB1LPENR & (RCC_AHB1LPENR_SRAM1LPEN)) != RESET)
|
|
#define __HAL_RCC_SRAM2_IS_CLK_SLEEP_ENABLED() ((RCC->AHB1LPENR & (RCC_AHB1LPENR_SRAM2LPEN)) != RESET)
|
|
#define __HAL_RCC_BKPSRAM_IS_CLK_SLEEP_ENABLED() ((RCC->AHB1LPENR & (RCC_AHB1LPENR_BKPSRAMLPEN)) != RESET)
|
|
#define __HAL_RCC_DTCM_IS_CLK_SLEEP_ENABLED() ((RCC->AHB1LPENR & (RCC_AHB1LPENR_DTCMLPEN)) != RESET)
|
|
#define __HAL_RCC_DMA2_IS_CLK_SLEEP_ENABLED() ((RCC->AHB1LPENR & (RCC_AHB1LPENR_DMA2LPEN)) != RESET)
|
|
#define __HAL_RCC_DMA2D_IS_CLK_SLEEP_ENABLED() ((RCC->AHB1LPENR & (RCC_AHB1LPENR_DMA2DLPEN)) != RESET)
|
|
#define __HAL_RCC_ETHMAC_IS_CLK_SLEEP_ENABLED() ((RCC->AHB1LPENR & (RCC_AHB1LPENR_ETHMACLPEN)) != RESET)
|
|
#define __HAL_RCC_ETHMACTX_IS_CLK_SLEEP_ENABLED() ((RCC->AHB1LPENR & (RCC_AHB1LPENR_ETHMACTXLPEN)) != RESET)
|
|
#define __HAL_RCC_ETHMACRX_IS_CLK_SLEEP_ENABLED() ((RCC->AHB1LPENR & (RCC_AHB1LPENR_ETHMACRXLPEN)) != RESET)
|
|
#define __HAL_RCC_ETHMACPTP_IS_CLK_SLEEP_ENABLED() ((RCC->AHB1LPENR & (RCC_AHB1LPENR_ETHMACPTPLPEN)) != RESET)
|
|
#define __HAL_RCC_USB_OTG_HS_IS_CLK_SLEEP_ENABLED() ((RCC->AHB1LPENR & (RCC_AHB1LPENR_OTGHSLPEN)) != RESET)
|
|
#define __HAL_RCC_USB_OTG_HS_ULPI_IS_CLK_SLEEP_ENABLED() ((RCC->AHB1LPENR & (RCC_AHB1LPENR_OTGHSULPILPEN)) != RESET)
|
|
#define __HAL_RCC_GPIOA_IS_CLK_SLEEP_ENABLED() ((RCC->AHB1LPENR & (RCC_AHB1LPENR_GPIOALPEN)) != RESET)
|
|
#define __HAL_RCC_GPIOB_IS_CLK_SLEEP_ENABLED() ((RCC->AHB1LPENR & (RCC_AHB1LPENR_GPIOBLPEN)) != RESET)
|
|
#define __HAL_RCC_GPIOC_IS_CLK_SLEEP_ENABLED() ((RCC->AHB1LPENR & (RCC_AHB1LPENR_GPIOCLPEN)) != RESET)
|
|
#define __HAL_RCC_GPIOD_IS_CLK_SLEEP_ENABLED() ((RCC->AHB1LPENR & (RCC_AHB1LPENR_GPIODLPEN)) != RESET)
|
|
#define __HAL_RCC_GPIOE_IS_CLK_SLEEP_ENABLED() ((RCC->AHB1LPENR & (RCC_AHB1LPENR_GPIOELPEN)) != RESET)
|
|
#define __HAL_RCC_GPIOF_IS_CLK_SLEEP_ENABLED() ((RCC->AHB1LPENR & (RCC_AHB1LPENR_GPIOFLPEN)) != RESET)
|
|
#define __HAL_RCC_GPIOG_IS_CLK_SLEEP_ENABLED() ((RCC->AHB1LPENR & (RCC_AHB1LPENR_GPIOGLPEN)) != RESET)
|
|
#define __HAL_RCC_GPIOH_IS_CLK_SLEEP_ENABLED() ((RCC->AHB1LPENR & (RCC_AHB1LPENR_GPIOHLPEN)) != RESET)
|
|
#define __HAL_RCC_GPIOI_IS_CLK_SLEEP_ENABLED() ((RCC->AHB1LPENR & (RCC_AHB1LPENR_GPIOILPEN)) != RESET)
|
|
#define __HAL_RCC_GPIOJ_IS_CLK_SLEEP_ENABLED() ((RCC->AHB1LPENR & (RCC_AHB1LPENR_GPIOJLPEN)) != RESET)
|
|
#define __HAL_RCC_GPIOK_IS_CLK_SLEEP_ENABLED() ((RCC->AHB1LPENR & (RCC_AHB1LPENR_GPIOKLPEN)) != RESET)
|
|
|
|
#define __HAL_RCC_FLITF_IS_CLK_SLEEP_DISABLED() ((RCC->AHB1LPENR & (RCC_AHB1LPENR_FLITFLPEN)) == RESET)
|
|
#define __HAL_RCC_AXI_IS_CLK_SLEEP_DISABLED() ((RCC->AHB1LPENR & (RCC_AHB1LPENR_AXILPEN)) == RESET)
|
|
#define __HAL_RCC_SRAM1_IS_CLK_SLEEP_DISABLED() ((RCC->AHB1LPENR & (RCC_AHB1LPENR_SRAM1LPEN)) == RESET)
|
|
#define __HAL_RCC_SRAM2_IS_CLK_SLEEP_DISABLED() ((RCC->AHB1LPENR & (RCC_AHB1LPENR_SRAM2LPEN)) == RESET)
|
|
#define __HAL_RCC_BKPSRAM_IS_CLK_SLEEP_DISABLED() ((RCC->AHB1LPENR & (RCC_AHB1LPENR_BKPSRAMLPEN)) == RESET)
|
|
#define __HAL_RCC_DTCM_IS_CLK_SLEEP_DISABLED() ((RCC->AHB1LPENR & (RCC_AHB1LPENR_DTCMLPEN)) == RESET)
|
|
#define __HAL_RCC_DMA2_IS_CLK_SLEEP_DISABLED() ((RCC->AHB1LPENR & (RCC_AHB1LPENR_DMA2LPEN)) == RESET)
|
|
#define __HAL_RCC_DMA2D_IS_CLK_SLEEP_DISABLED() ((RCC->AHB1LPENR & (RCC_AHB1LPENR_DMA2DLPEN)) == RESET)
|
|
#define __HAL_RCC_ETHMAC_IS_CLK_SLEEP_DISABLED() ((RCC->AHB1LPENR & (RCC_AHB1LPENR_ETHMACLPEN)) == RESET)
|
|
#define __HAL_RCC_ETHMACTX_IS_CLK_SLEEP_DISABLED() ((RCC->AHB1LPENR & (RCC_AHB1LPENR_ETHMACTXLPEN)) == RESET)
|
|
#define __HAL_RCC_ETHMACRX_IS_CLK_SLEEP_DISABLED() ((RCC->AHB1LPENR & (RCC_AHB1LPENR_ETHMACRXLPEN)) == RESET)
|
|
#define __HAL_RCC_ETHMACPTP_IS_CLK_SLEEP_DISABLED() ((RCC->AHB1LPENR & (RCC_AHB1LPENR_ETHMACPTPLPEN)) == RESET)
|
|
#define __HAL_RCC_USB_OTG_HS_IS_CLK_SLEEP_DISABLED() ((RCC->AHB1LPENR & (RCC_AHB1LPENR_OTGHSLPEN)) == RESET)
|
|
#define __HAL_RCC_USB_OTG_HS_ULPI_IS_CLK_SLEEP_DISABLED() ((RCC->AHB1LPENR & (RCC_AHB1LPENR_OTGHSULPILPEN)) == RESET)
|
|
#define __HAL_RCC_GPIOA_IS_CLK_SLEEP_DISABLED() ((RCC->AHB1LPENR & (RCC_AHB1LPENR_GPIOALPEN)) == RESET)
|
|
#define __HAL_RCC_GPIOB_IS_CLK_SLEEP_DISABLED() ((RCC->AHB1LPENR & (RCC_AHB1LPENR_GPIOBLPEN)) == RESET)
|
|
#define __HAL_RCC_GPIOC_IS_CLK_SLEEP_DISABLED() ((RCC->AHB1LPENR & (RCC_AHB1LPENR_GPIOCLPEN)) == RESET)
|
|
#define __HAL_RCC_GPIOD_IS_CLK_SLEEP_DISABLED() ((RCC->AHB1LPENR & (RCC_AHB1LPENR_GPIODLPEN)) == RESET)
|
|
#define __HAL_RCC_GPIOE_IS_CLK_SLEEP_DISABLED() ((RCC->AHB1LPENR & (RCC_AHB1LPENR_GPIOELPEN)) == RESET)
|
|
#define __HAL_RCC_GPIOF_IS_CLK_SLEEP_DISABLED() ((RCC->AHB1LPENR & (RCC_AHB1LPENR_GPIOFLPEN)) == RESET)
|
|
#define __HAL_RCC_GPIOG_IS_CLK_SLEEP_DISABLED() ((RCC->AHB1LPENR & (RCC_AHB1LPENR_GPIOGLPEN)) == RESET)
|
|
#define __HAL_RCC_GPIOH_IS_CLK_SLEEP_DISABLED() ((RCC->AHB1LPENR & (RCC_AHB1LPENR_GPIOHLPEN)) == RESET)
|
|
#define __HAL_RCC_GPIOI_IS_CLK_SLEEP_DISABLED() ((RCC->AHB1LPENR & (RCC_AHB1LPENR_GPIOILPEN)) == RESET)
|
|
#define __HAL_RCC_GPIOJ_IS_CLK_SLEEP_DISABLED() ((RCC->AHB1LPENR & (RCC_AHB1LPENR_GPIOJLPEN)) == RESET)
|
|
#define __HAL_RCC_GPIOK_IS_CLK_SLEEP_DISABLED() ((RCC->AHB1LPENR & (RCC_AHB1LPENR_GPIOKLPEN)) == RESET)
|
|
|
|
/** @brief Get the enable or disable status of the AHB2 peripheral clock during Low Power (Sleep) mode.
|
|
* @note Peripheral clock gating in SLEEP mode can be used to further reduce
|
|
* power consumption.
|
|
* @note After wakeup from SLEEP mode, the peripheral clock is enabled again.
|
|
* @note By default, all peripheral clocks are enabled during SLEEP mode.
|
|
*/
|
|
#define __HAL_RCC_DCMI_IS_CLK_SLEEP_ENABLED() ((RCC->AHB2LPENR & (RCC_AHB2LPENR_DCMILPEN)) != RESET)
|
|
#define __HAL_RCC_DCMI_IS_CLK_SLEEP_DISABLED() ((RCC->AHB2LPENR & (RCC_AHB2LPENR_DCMILPEN)) == RESET)
|
|
|
|
#define __HAL_RCC_RNG_IS_CLK_SLEEP_ENABLED() ((RCC->AHB2LPENR & (RCC_AHB2LPENR_RNGLPEN)) != RESET)
|
|
#define __HAL_RCC_RNG_IS_CLK_SLEEP_DISABLED() ((RCC->AHB2LPENR & (RCC_AHB2LPENR_RNGLPEN)) == RESET)
|
|
|
|
#define __HAL_RCC_USB_OTG_FS_IS_CLK_SLEEP_ENABLED() ((RCC->AHB2LPENR & (RCC_AHB2LPENR_OTGFSLPEN)) != RESET)
|
|
#define __HAL_RCC_USB_OTG_FS_IS_CLK_SLEEP_DISABLED() ((RCC->AHB2LPENR & (RCC_AHB2LPENR_OTGFSLPEN)) == RESET)
|
|
|
|
#if defined(STM32F756xx)
|
|
#define __HAL_RCC_CRYP_IS_CLK_SLEEP_ENABLED() ((RCC->AHB2LPENR & (RCC_AHB2LPENR_CRYPLPEN)) != RESET)
|
|
#define __HAL_RCC_HASH_IS_CLK_SLEEP_ENABLED() ((RCC->AHB2LPENR & (RCC_AHB2LPENR_HASHLPEN)) != RESET)
|
|
|
|
#define __HAL_RCC_CRYP_IS_CLK_SLEEP_DISABLED() ((RCC->AHB2LPENR & (RCC_AHB2LPENR_CRYPLPEN)) == RESET)
|
|
#define __HAL_RCC_HASH_IS_CLK_SLEEP_DISABLED() ((RCC->AHB2LPENR & (RCC_AHB2LPENR_HASHLPEN)) == RESET)
|
|
#endif /* STM32F756xx */
|
|
|
|
/** @brief Get the enable or disable status of the AHB3 peripheral clock during Low Power (Sleep) mode.
|
|
* @note Peripheral clock gating in SLEEP mode can be used to further reduce
|
|
* power consumption.
|
|
* @note After wakeup from SLEEP mode, the peripheral clock is enabled again.
|
|
* @note By default, all peripheral clocks are enabled during SLEEP mode.
|
|
*/
|
|
#define __HAL_RCC_FMC_IS_CLK_SLEEP_ENABLED() ((RCC->AHB3LPENR & (RCC_AHB3LPENR_FMCLPEN)) != RESET)
|
|
#define __HAL_RCC_FMC_IS_CLK_SLEEP_DISABLED() ((RCC->AHB3LPENR & (RCC_AHB3LPENR_FMCLPEN)) == RESET)
|
|
|
|
#define __HAL_RCC_QSPI_IS_CLK_SLEEP_ENABLED() ((RCC->AHB3LPENR & (RCC_AHB3LPENR_QSPILPEN)) != RESET)
|
|
#define __HAL_RCC_QSPI_IS_CLK_SLEEP_DISABLED() ((RCC->AHB3LPENR & (RCC_AHB3LPENR_QSPILPEN)) == RESET)
|
|
|
|
/** @brief Get the enable or disable status of the APB1 peripheral clock during Low Power (Sleep) mode.
|
|
* @note Peripheral clock gating in SLEEP mode can be used to further reduce
|
|
* power consumption.
|
|
* @note After wakeup from SLEEP mode, the peripheral clock is enabled again.
|
|
* @note By default, all peripheral clocks are enabled during SLEEP mode.
|
|
*/
|
|
#define __HAL_RCC_TIM2_IS_CLK_SLEEP_ENABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_TIM2LPEN)) != RESET)
|
|
#define __HAL_RCC_TIM3_IS_CLK_SLEEP_ENABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_TIM3LPEN)) != RESET)
|
|
#define __HAL_RCC_TIM4_IS_CLK_SLEEP_ENABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_TIM4LPEN)) != RESET)
|
|
#define __HAL_RCC_TIM5_IS_CLK_SLEEP_ENABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_TIM5LPEN)) != RESET)
|
|
#define __HAL_RCC_TIM6_IS_CLK_SLEEP_ENABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_TIM6LPEN)) != RESET)
|
|
#define __HAL_RCC_TIM7_IS_CLK_SLEEP_ENABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_TIM7LPEN)) != RESET)
|
|
#define __HAL_RCC_TIM12_IS_CLK_SLEEP_ENABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_TIM12LPEN)) != RESET)
|
|
#define __HAL_RCC_TIM13_IS_CLK_SLEEP_ENABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_TIM13LPEN)) != RESET)
|
|
#define __HAL_RCC_TIM14_IS_CLK_SLEEP_ENABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_TIM14LPEN)) != RESET)
|
|
#define __HAL_RCC_LPTIM1_IS_CLK_SLEEP_ENABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_LPTIM1LPEN)) != RESET)
|
|
#define __HAL_RCC_SPI2_IS_CLK_SLEEP_ENABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_SPI2LPEN)) != RESET)
|
|
#define __HAL_RCC_SPI3_IS_CLK_SLEEP_ENABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_SPI3LPEN)) != RESET)
|
|
#define __HAL_RCC_SPDIFRX_IS_CLK_SLEEP_ENABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_SPDIFRXLPEN)) != RESET)
|
|
#define __HAL_RCC_USART2_IS_CLK_SLEEP_ENABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_USART2LPEN)) != RESET)
|
|
#define __HAL_RCC_USART3_IS_CLK_SLEEP_ENABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_USART3LPEN)) != RESET)
|
|
#define __HAL_RCC_UART4_IS_CLK_SLEEP_ENABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_UART4LPEN)) != RESET)
|
|
#define __HAL_RCC_UART5_IS_CLK_SLEEP_ENABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_UART5LPEN)) != RESET)
|
|
#define __HAL_RCC_I2C1_IS_CLK_SLEEP_ENABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_I2C1LPEN)) != RESET)
|
|
#define __HAL_RCC_I2C2_IS_CLK_SLEEP_ENABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_I2C2LPEN)) != RESET)
|
|
#define __HAL_RCC_I2C3_IS_CLK_SLEEP_ENABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_I2C3LPEN)) != RESET)
|
|
#define __HAL_RCC_I2C4_IS_CLK_SLEEP_ENABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_I2C4LPEN)) != RESET)
|
|
#define __HAL_RCC_CAN1_IS_CLK_SLEEP_ENABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_CAN1LPEN)) != RESET)
|
|
#define __HAL_RCC_CAN2_IS_CLK_SLEEP_ENABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_CAN2LPEN)) != RESET)
|
|
#define __HAL_RCC_CEC_IS_CLK_SLEEP_ENABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_CECLPEN)) != RESET)
|
|
#define __HAL_RCC_DAC_IS_CLK_SLEEP_ENABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_DACLPEN)) != RESET)
|
|
#define __HAL_RCC_UART7_IS_CLK_SLEEP_ENABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_UART7LPEN)) != RESET)
|
|
#define __HAL_RCC_UART8_IS_CLK_SLEEP_ENABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_UART8LPEN)) != RESET)
|
|
|
|
#define __HAL_RCC_TIM2_IS_CLK_SLEEP_DISABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_TIM2LPEN)) == RESET)
|
|
#define __HAL_RCC_TIM3_IS_CLK_SLEEP_DISABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_TIM3LPEN)) == RESET)
|
|
#define __HAL_RCC_TIM4_IS_CLK_SLEEP_DISABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_TIM4LPEN)) == RESET)
|
|
#define __HAL_RCC_TIM5_IS_CLK_SLEEP_DISABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_TIM5LPEN)) == RESET)
|
|
#define __HAL_RCC_TIM6_IS_CLK_SLEEP_DISABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_TIM6LPEN)) == RESET)
|
|
#define __HAL_RCC_TIM7_IS_CLK_SLEEP_DISABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_TIM7LPEN)) == RESET)
|
|
#define __HAL_RCC_TIM12_IS_CLK_SLEEP_DISABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_TIM12LPEN)) == RESET)
|
|
#define __HAL_RCC_TIM13_IS_CLK_SLEEP_DISABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_TIM13LPEN)) == RESET)
|
|
#define __HAL_RCC_TIM14_IS_CLK_SLEEP_DISABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_TIM14LPEN)) == RESET)
|
|
#define __HAL_RCC_LPTIM1_IS_CLK_SLEEP_DISABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_LPTIM1LPEN)) == RESET)
|
|
#define __HAL_RCC_SPI2_IS_CLK_SLEEP_DISABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_SPI2LPEN)) == RESET)
|
|
#define __HAL_RCC_SPI3_IS_CLK_SLEEP_DISABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_SPI3LPEN)) == RESET)
|
|
#define __HAL_RCC_SPDIFRX_IS_CLK_SLEEP_DISABLED()((RCC->APB1LPENR & (RCC_APB1LPENR_SPDIFRXLPEN)) == RESET)
|
|
#define __HAL_RCC_USART2_IS_CLK_SLEEP_DISABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_USART2LPEN)) == RESET)
|
|
#define __HAL_RCC_USART3_IS_CLK_SLEEP_DISABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_USART3LPEN)) == RESET)
|
|
#define __HAL_RCC_UART4_IS_CLK_SLEEP_DISABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_UART4LPEN)) == RESET)
|
|
#define __HAL_RCC_UART5_IS_CLK_SLEEP_DISABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_UART5LPEN)) == RESET)
|
|
#define __HAL_RCC_I2C1_IS_CLK_SLEEP_DISABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_I2C1LPEN)) == RESET)
|
|
#define __HAL_RCC_I2C2_IS_CLK_SLEEP_DISABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_I2C2LPEN)) == RESET)
|
|
#define __HAL_RCC_I2C3_IS_CLK_SLEEP_DISABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_I2C3LPEN)) == RESET)
|
|
#define __HAL_RCC_I2C4_IS_CLK_SLEEP_DISABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_I2C4LPEN)) == RESET)
|
|
#define __HAL_RCC_CAN1_IS_CLK_SLEEP_DISABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_CAN1LPEN)) == RESET)
|
|
#define __HAL_RCC_CAN2_IS_CLK_SLEEP_DISABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_CAN2LPEN)) == RESET)
|
|
#define __HAL_RCC_CEC_IS_CLK_SLEEP_DISABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_CECLPEN)) == RESET)
|
|
#define __HAL_RCC_DAC_IS_CLK_SLEEP_DISABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_DACLPEN)) == RESET)
|
|
#define __HAL_RCC_UART7_IS_CLK_SLEEP_DISABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_UART7LPEN)) == RESET)
|
|
#define __HAL_RCC_UART8_IS_CLK_SLEEP_DISABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_UART8LPEN)) == RESET)
|
|
|
|
/** @brief Get the enable or disable status of the APB2 peripheral clock during Low Power (Sleep) mode.
|
|
* @note Peripheral clock gating in SLEEP mode can be used to further reduce
|
|
* power consumption.
|
|
* @note After wakeup from SLEEP mode, the peripheral clock is enabled again.
|
|
* @note By default, all peripheral clocks are enabled during SLEEP mode.
|
|
*/
|
|
#define __HAL_RCC_TIM1_IS_CLK_SLEEP_ENABLED() ((RCC->APB2LPENR & (RCC_APB2LPENR_TIM1LPEN)) != RESET)
|
|
#define __HAL_RCC_TIM8_IS_CLK_SLEEP_ENABLED() ((RCC->APB2LPENR & (RCC_APB2LPENR_TIM8LPEN)) != RESET)
|
|
#define __HAL_RCC_USART1_IS_CLK_SLEEP_ENABLED() ((RCC->APB2LPENR & (RCC_APB2LPENR_USART1LPEN)) != RESET)
|
|
#define __HAL_RCC_USART6_IS_CLK_SLEEP_ENABLED() ((RCC->APB2LPENR & (RCC_APB2LPENR_USART6LPEN)) != RESET)
|
|
#define __HAL_RCC_ADC1_IS_CLK_SLEEP_ENABLED() ((RCC->APB2LPENR & (RCC_APB2LPENR_ADC1LPEN)) != RESET)
|
|
#define __HAL_RCC_ADC2_IS_CLK_SLEEP_ENABLED() ((RCC->APB2LPENR & (RCC_APB2LPENR_ADC2LPEN)) != RESET)
|
|
#define __HAL_RCC_ADC3_IS_CLK_SLEEP_ENABLED() ((RCC->APB2LPENR & (RCC_APB2LPENR_ADC3LPEN)) != RESET)
|
|
#define __HAL_RCC_SDMMC1_IS_CLK_SLEEP_ENABLED() ((RCC->APB2LPENR & (RCC_APB2LPENR_SDMMC1LPEN)) != RESET)
|
|
#define __HAL_RCC_SPI1_IS_CLK_SLEEP_ENABLED() ((RCC->APB2LPENR & (RCC_APB2LPENR_SPI1LPEN)) != RESET)
|
|
#define __HAL_RCC_SPI4_IS_CLK_SLEEP_ENABLED() ((RCC->APB2LPENR & (RCC_APB2LPENR_SPI4LPEN)) != RESET)
|
|
#define __HAL_RCC_TIM9_IS_CLK_SLEEP_ENABLED() ((RCC->APB2LPENR & (RCC_APB2LPENR_TIM9LPEN)) != RESET)
|
|
#define __HAL_RCC_TIM10_IS_CLK_SLEEP_ENABLED() ((RCC->APB2LPENR & (RCC_APB2LPENR_TIM10LPEN)) != RESET)
|
|
#define __HAL_RCC_TIM11_IS_CLK_SLEEP_ENABLED() ((RCC->APB2LPENR & (RCC_APB2LPENR_TIM11LPEN)) != RESET)
|
|
#define __HAL_RCC_SPI5_IS_CLK_SLEEP_ENABLED() ((RCC->APB2LPENR & (RCC_APB2LPENR_SPI5LPEN)) != RESET)
|
|
#define __HAL_RCC_SPI6_IS_CLK_SLEEP_ENABLED() ((RCC->APB2LPENR & (RCC_APB2LPENR_SPI6LPEN)) != RESET)
|
|
#define __HAL_RCC_SAI1_IS_CLK_SLEEP_ENABLED() ((RCC->APB2LPENR & (RCC_APB2LPENR_SAI1LPEN)) != RESET)
|
|
#define __HAL_RCC_SAI2_IS_CLK_SLEEP_ENABLED() ((RCC->APB2LPENR & (RCC_APB2LPENR_SAI2LPEN)) != RESET)
|
|
#if defined(STM32F756xx) || defined(STM32F746xx)
|
|
#define __HAL_RCC_LTDC_IS_CLK_SLEEP_ENABLED() ((RCC->APB2LPENR & (RCC_APB2LPENR_LTDCLPEN)) != RESET)
|
|
#endif /* STM32F756xx || STM32F746xx */
|
|
|
|
#define __HAL_RCC_TIM1_IS_CLK_SLEEP_DISABLED() ((RCC->APB2LPENR & (RCC_APB2LPENR_TIM1LPEN)) == RESET)
|
|
#define __HAL_RCC_TIM8_IS_CLK_SLEEP_DISABLED() ((RCC->APB2LPENR & (RCC_APB2LPENR_TIM8LPEN)) == RESET)
|
|
#define __HAL_RCC_USART1_IS_CLK_SLEEP_DISABLED() ((RCC->APB2LPENR & (RCC_APB2LPENR_USART1LPEN)) == RESET)
|
|
#define __HAL_RCC_USART6_IS_CLK_SLEEP_DISABLED() ((RCC->APB2LPENR & (RCC_APB2LPENR_USART6LPEN)) == RESET)
|
|
#define __HAL_RCC_ADC1_IS_CLK_SLEEP_DISABLED() ((RCC->APB2LPENR & (RCC_APB2LPENR_ADC1LPEN)) == RESET)
|
|
#define __HAL_RCC_ADC2_IS_CLK_SLEEP_DISABLED() ((RCC->APB2LPENR & (RCC_APB2LPENR_ADC2LPEN)) == RESET)
|
|
#define __HAL_RCC_ADC3_IS_CLK_SLEEP_DISABLED() ((RCC->APB2LPENR & (RCC_APB2LPENR_ADC3LPEN)) == RESET)
|
|
#define __HAL_RCC_SDMMC1_IS_CLK_SLEEP_DISABLED() ((RCC->APB2LPENR & (RCC_APB2LPENR_SDMMC1LPEN)) == RESET)
|
|
#define __HAL_RCC_SPI1_IS_CLK_SLEEP_DISABLED() ((RCC->APB2LPENR & (RCC_APB2LPENR_SPI1LPEN)) == RESET)
|
|
#define __HAL_RCC_SPI4_IS_CLK_SLEEP_DISABLED() ((RCC->APB2LPENR & (RCC_APB2LPENR_SPI4LPEN)) == RESET)
|
|
#define __HAL_RCC_TIM9_IS_CLK_SLEEP_DISABLED() ((RCC->APB2LPENR & (RCC_APB2LPENR_TIM9LPEN)) == RESET)
|
|
#define __HAL_RCC_TIM10_IS_CLK_SLEEP_DISABLED() ((RCC->APB2LPENR & (RCC_APB2LPENR_TIM10LPEN)) == RESET)
|
|
#define __HAL_RCC_TIM11_IS_CLK_SLEEP_DISABLED() ((RCC->APB2LPENR & (RCC_APB2LPENR_TIM11LPEN)) == RESET)
|
|
#define __HAL_RCC_SPI5_IS_CLK_SLEEP_DISABLED() ((RCC->APB2LPENR & (RCC_APB2LPENR_SPI5LPEN)) == RESET)
|
|
#define __HAL_RCC_SPI6_IS_CLK_SLEEP_DISABLED() ((RCC->APB2LPENR & (RCC_APB2LPENR_SPI6LPEN)) == RESET)
|
|
#define __HAL_RCC_SAI1_IS_CLK_SLEEP_DISABLED() ((RCC->APB2LPENR & (RCC_APB2LPENR_SAI1LPEN)) == RESET)
|
|
#define __HAL_RCC_SAI2_IS_CLK_SLEEP_DISABLED() ((RCC->APB2LPENR & (RCC_APB2LPENR_SAI2LPEN)) == RESET)
|
|
#if defined(STM32F756xx) || defined(STM32F746xx)
|
|
#define __HAL_RCC_LTDC_IS_CLK_SLEEP_DISABLED() ((RCC->APB2LPENR & (RCC_APB2LPENR_LTDCLPEN)) == RESET)
|
|
#endif /* STM32F756xx || STM32F746xx */
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/*---------------------------------------------------------------------------------------------*/
|
|
|
|
/** @brief Macro to configure the Timers clocks prescalers
|
|
* @param __PRESC__ : specifies the Timers clocks prescalers selection
|
|
* This parameter can be one of the following values:
|
|
* @arg RCC_TIMPRES_DESACTIVATED: The Timers kernels clocks prescaler is
|
|
* equal to HPRE if PPREx is corresponding to division by 1 or 2,
|
|
* else it is equal to [(HPRE * PPREx) / 2] if PPREx is corresponding to
|
|
* division by 4 or more.
|
|
* @arg RCC_TIMPRES_ACTIVATED: The Timers kernels clocks prescaler is
|
|
* equal to HPRE if PPREx is corresponding to division by 1, 2 or 4,
|
|
* else it is equal to [(HPRE * PPREx) / 4] if PPREx is corresponding
|
|
* to division by 8 or more.
|
|
*/
|
|
#define __HAL_RCC_TIMCLKPRESCALER(__PRESC__) do {RCC->DCKCFGR1 &= ~(RCC_DCKCFGR1_TIMPRE);\
|
|
RCC->DCKCFGR1 |= (__PRESC__);\
|
|
}while(0)
|
|
|
|
/** @brief Macros to Enable or Disable the PLLISAI.
|
|
* @note The PLLSAI is disabled by hardware when entering STOP and STANDBY modes.
|
|
*/
|
|
#define __HAL_RCC_PLLSAI_ENABLE() (RCC->CR |= (RCC_CR_PLLSAION))
|
|
#define __HAL_RCC_PLLSAI_DISABLE() (RCC->CR &= ~(RCC_CR_PLLSAION))
|
|
|
|
/** @brief Macro to configure the PLLSAI clock multiplication and division factors.
|
|
* @note This function must be used only when the PLLSAI is disabled.
|
|
* @note PLLSAI clock source is common with the main PLL (configured in
|
|
* RCC_PLLConfig function )
|
|
* @param __PLLSAIN__: specifies the multiplication factor for PLLSAI VCO output clock.
|
|
* This parameter must be a number between Min_Data = 49 and Max_Data = 432.
|
|
* @note You have to set the PLLSAIN parameter correctly to ensure that the VCO
|
|
* output frequency is between Min_Data = 49 and Max_Data = 432 MHz.
|
|
* @param __PLLSAIQ__: specifies the division factor for SAI clock
|
|
* This parameter must be a number between Min_Data = 2 and Max_Data = 15.
|
|
* @param __PLLSAIR__: specifies the division factor for LTDC clock
|
|
* This parameter must be a number between Min_Data = 2 and Max_Data = 7.
|
|
* @param __PLLSAIP__: specifies the division factor for USB, RNG, SDMMC clocks
|
|
* This parameter can be a value of @ref RCCEx_PLLSAIP_Clock_Divider .
|
|
*/
|
|
#define __HAL_RCC_PLLSAI_CONFIG(__PLLSAIN__, __PLLSAIP__, __PLLSAIQ__, __PLLSAIR__) (RCC->PLLSAICFGR = ((__PLLSAIN__) << 6) | ((__PLLSAIP__) << 16) | ((__PLLSAIQ__) << 24) | ((__PLLSAIR__) << 28))
|
|
|
|
/** @brief Macro used by the SAI HAL driver to configure the PLLI2S clock multiplication and division factors.
|
|
* @note This macro must be used only when the PLLI2S is disabled.
|
|
* @note PLLI2S clock source is common with the main PLL (configured in
|
|
* HAL_RCC_ClockConfig() API)
|
|
* @param __PLLI2SN__: specifies the multiplication factor for PLLI2S VCO output clock.
|
|
* This parameter must be a number between Min_Data = 192 and Max_Data = 432.
|
|
* @note You have to set the PLLI2SN parameter correctly to ensure that the VCO
|
|
* output frequency is between Min_Data = 192 and Max_Data = 432 MHz.
|
|
* @param __PLLI2SQ__: specifies the division factor for SAI clock.
|
|
* This parameter must be a number between Min_Data = 2 and Max_Data = 15.
|
|
* @param __PLLI2SR__: specifies the division factor for I2S clock
|
|
* This parameter must be a number between Min_Data = 2 and Max_Data = 7.
|
|
* @note You have to set the PLLI2SR parameter correctly to not exceed 192 MHz
|
|
* on the I2S clock frequency.
|
|
* @param __PLLI2SP__: specifies the division factor for SPDDIF-RX clock.
|
|
* This parameter can be a number between 0 and 3 for respective values 2, 4, 6 and 8
|
|
*/
|
|
#define __HAL_RCC_PLLI2S_CONFIG(__PLLI2SN__, __PLLI2SP__, __PLLI2SQ__, __PLLI2SR__) (RCC->PLLI2SCFGR = ((__PLLI2SN__) << 6) | ((__PLLI2SP__) << 16) | ((__PLLI2SQ__) << 24) | ((__PLLI2SR__) << 28))
|
|
|
|
/** @brief Macro to configure the SAI clock Divider coming from PLLI2S.
|
|
* @note This function must be called before enabling the PLLI2S.
|
|
* @param __PLLI2SDivQ__: specifies the PLLI2S division factor for SAI1 clock .
|
|
* This parameter must be a number between 1 and 32.
|
|
* SAI1 clock frequency = f(PLLI2SQ) / __PLLI2SDivQ__
|
|
*/
|
|
#define __HAL_RCC_PLLI2S_PLLSAICLKDIVQ_CONFIG(__PLLI2SDivQ__) (MODIFY_REG(RCC->DCKCFGR1, RCC_DCKCFGR1_PLLI2SDIVQ, (__PLLI2SDivQ__)-1))
|
|
|
|
/** @brief Macro to configure the SAI clock Divider coming from PLLSAI.
|
|
* @note This function must be called before enabling the PLLSAI.
|
|
* @param __PLLSAIDivQ__: specifies the PLLSAI division factor for SAI1 clock .
|
|
* This parameter must be a number between Min_Data = 1 and Max_Data = 32.
|
|
* SAI1 clock frequency = f(PLLSAIQ) / __PLLSAIDivQ__
|
|
*/
|
|
#define __HAL_RCC_PLLSAI_PLLSAICLKDIVQ_CONFIG(__PLLSAIDivQ__) (MODIFY_REG(RCC->DCKCFGR1, RCC_DCKCFGR1_PLLSAIDIVQ, ((__PLLSAIDivQ__)-1)<<8))
|
|
|
|
/** @brief Macro to configure the LTDC clock Divider coming from PLLSAI.
|
|
*
|
|
* @note This function must be called before enabling the PLLSAI.
|
|
* @param __PLLSAIDivR__: specifies the PLLSAI division factor for LTDC clock .
|
|
* This parameter must be a number between Min_Data = 2 and Max_Data = 16.
|
|
* LTDC clock frequency = f(PLLSAIR) / __PLLSAIDivR__
|
|
*/
|
|
#define __HAL_RCC_PLLSAI_PLLSAICLKDIVR_CONFIG(__PLLSAIDivR__)\
|
|
MODIFY_REG(RCC->DCKCFGR1, RCC_DCKCFGR1_PLLSAIDIVR, (uint32_t)(__PLLSAIDivR__))
|
|
|
|
/** @brief Macro to configure SAI1 clock source selection.
|
|
* @note This function must be called before enabling PLLSAI, PLLI2S and
|
|
* the SAI clock.
|
|
* @param __SOURCE__: specifies the SAI1 clock source.
|
|
* This parameter can be one of the following values:
|
|
* @arg RCC_SAI1CLKSOURCE_PLLI2S: PLLI2S_Q clock divided by PLLI2SDIVQ used
|
|
* as SAI1 clock.
|
|
* @arg RCC_SAI1CLKSOURCE_PLLSAI: PLLISAI_Q clock divided by PLLSAIDIVQ used
|
|
* as SAI1 clock.
|
|
* @arg RCC_SAI1CLKSOURCE_PIN: External clock mapped on the I2S_CKIN pin
|
|
* used as SAI1 clock.
|
|
*/
|
|
#define __HAL_RCC_SAI1_CONFIG(__SOURCE__)\
|
|
MODIFY_REG(RCC->DCKCFGR1, RCC_DCKCFGR1_SAI1SEL, (uint32_t)(__SOURCE__))
|
|
|
|
/** @brief Macro to get the SAI1 clock source.
|
|
* @retval The clock source can be one of the following values:
|
|
* @arg RCC_SAI1CLKSOURCE_PLLI2S: PLLI2S_Q clock divided by PLLI2SDIVQ used
|
|
* as SAI1 clock.
|
|
* @arg RCC_SAI1CLKSOURCE_PLLSAI: PLLISAI_Q clock divided by PLLSAIDIVQ used
|
|
* as SAI1 clock.
|
|
* @arg RCC_SAI1CLKSOURCE_PIN: External clock mapped on the I2S_CKIN pin
|
|
* used as SAI1 clock.
|
|
*/
|
|
#define __HAL_RCC_GET_SAI1_SOURCE() ((uint32_t)(READ_BIT(RCC->DCKCFGR1, RCC_DCKCFGR1_SAI1SEL)))
|
|
|
|
|
|
/** @brief Macro to configure SAI2 clock source selection.
|
|
* @note This function must be called before enabling PLLSAI, PLLI2S and
|
|
* the SAI clock.
|
|
* @param __SOURCE__: specifies the SAI2 clock source.
|
|
* This parameter can be one of the following values:
|
|
* @arg RCC_SAI2CLKSOURCE_PLLI2S: PLLI2S_Q clock divided by PLLI2SDIVQ used
|
|
* as SAI2 clock.
|
|
* @arg RCC_SAI2CLKSOURCE_PLLSAI: PLLISAI_Q clock divided by PLLSAIDIVQ used
|
|
* as SAI2 clock.
|
|
* @arg RCC_SAI2CLKSOURCE_PIN: External clock mapped on the I2S_CKIN pin
|
|
* used as SAI2 clock.
|
|
*/
|
|
#define __HAL_RCC_SAI2_CONFIG(__SOURCE__)\
|
|
MODIFY_REG(RCC->DCKCFGR1, RCC_DCKCFGR1_SAI2SEL, (uint32_t)(__SOURCE__))
|
|
|
|
|
|
/** @brief Macro to get the SAI2 clock source.
|
|
* @retval The clock source can be one of the following values:
|
|
* @arg RCC_SAI2CLKSOURCE_PLLI2S: PLLI2S_Q clock divided by PLLI2SDIVQ used
|
|
* as SAI2 clock.
|
|
* @arg RCC_SAI2CLKSOURCE_PLLSAI: PLLISAI_Q clock divided by PLLSAIDIVQ used
|
|
* as SAI2 clock.
|
|
* @arg RCC_SAI2CLKSOURCE_PIN: External clock mapped on the I2S_CKIN pin
|
|
* used as SAI2 clock.
|
|
*/
|
|
#define __HAL_RCC_GET_SAI2_SOURCE() ((uint32_t)(READ_BIT(RCC->DCKCFGR1, RCC_DCKCFGR1_SAI2SEL)))
|
|
|
|
|
|
/** @brief Enable PLLSAI_RDY interrupt.
|
|
*/
|
|
#define __HAL_RCC_PLLSAI_ENABLE_IT() (RCC->CIR |= (RCC_CIR_PLLSAIRDYIE))
|
|
|
|
/** @brief Disable PLLSAI_RDY interrupt.
|
|
*/
|
|
#define __HAL_RCC_PLLSAI_DISABLE_IT() (RCC->CIR &= ~(RCC_CIR_PLLSAIRDYIE))
|
|
|
|
/** @brief Clear the PLLSAI RDY interrupt pending bits.
|
|
*/
|
|
#define __HAL_RCC_PLLSAI_CLEAR_IT() (RCC->CIR |= (RCC_CIR_PLLSAIRDYF))
|
|
|
|
/** @brief Check the PLLSAI RDY interrupt has occurred or not.
|
|
* @retval The new state (TRUE or FALSE).
|
|
*/
|
|
#define __HAL_RCC_PLLSAI_GET_IT() ((RCC->CIR & (RCC_CIR_PLLSAIRDYIE)) == (RCC_CIR_PLLSAIRDYIE))
|
|
|
|
/** @brief Check PLLSAI RDY flag is set or not.
|
|
* @retval The new state (TRUE or FALSE).
|
|
*/
|
|
#define __HAL_RCC_PLLSAI_GET_FLAG() ((RCC->CR & (RCC_CR_PLLSAIRDY)) == (RCC_CR_PLLSAIRDY))
|
|
|
|
/** @brief Macro to Get I2S clock source selection.
|
|
* @retval The clock source can be one of the following values:
|
|
* @arg RCC_I2SCLKSOURCE_PLLI2S: PLLI2S VCO output clock divided by PLLI2SR used as I2S clock.
|
|
* @arg RCC_I2SCLKSOURCE_EXT: External clock mapped on the I2S_CKIN pin used as I2S clock source
|
|
*/
|
|
#define __HAL_RCC_GET_I2SCLKSOURCE() (READ_BIT(RCC->CFGR, RCC_CFGR_I2SSRC))
|
|
|
|
/** @brief Macro to configure the I2C1 clock (I2C1CLK).
|
|
*
|
|
* @param __I2C1_CLKSOURCE__: specifies the I2C1 clock source.
|
|
* This parameter can be one of the following values:
|
|
* @arg RCC_I2C1CLKSOURCE_PCLK1: PCLK1 selected as I2C1 clock
|
|
* @arg RCC_I2C1CLKSOURCE_HSI: HSI selected as I2C1 clock
|
|
* @arg RCC_I2C1CLKSOURCE_SYSCLK: System Clock selected as I2C1 clock
|
|
*/
|
|
#define __HAL_RCC_I2C1_CONFIG(__I2C1_CLKSOURCE__) \
|
|
MODIFY_REG(RCC->DCKCFGR2, RCC_DCKCFGR2_I2C1SEL, (uint32_t)(__I2C1_CLKSOURCE__))
|
|
|
|
/** @brief Macro to get the I2C1 clock source.
|
|
* @retval The clock source can be one of the following values:
|
|
* @arg RCC_I2C1CLKSOURCE_PCLK1: PCLK1 selected as I2C1 clock
|
|
* @arg RCC_I2C1CLKSOURCE_HSI: HSI selected as I2C1 clock
|
|
* @arg RCC_I2C1CLKSOURCE_SYSCLK: System Clock selected as I2C1 clock
|
|
*/
|
|
#define __HAL_RCC_GET_I2C1_SOURCE() ((uint32_t)(READ_BIT(RCC->DCKCFGR2, RCC_DCKCFGR2_I2C1SEL)))
|
|
|
|
/** @brief Macro to configure the I2C2 clock (I2C2CLK).
|
|
*
|
|
* @param __I2C2_CLKSOURCE__: specifies the I2C2 clock source.
|
|
* This parameter can be one of the following values:
|
|
* @arg RCC_I2C2CLKSOURCE_PCLK1: PCLK1 selected as I2C2 clock
|
|
* @arg RCC_I2C2CLKSOURCE_HSI: HSI selected as I2C2 clock
|
|
* @arg RCC_I2C2CLKSOURCE_SYSCLK: System Clock selected as I2C2 clock
|
|
*/
|
|
#define __HAL_RCC_I2C2_CONFIG(__I2C2_CLKSOURCE__) \
|
|
MODIFY_REG(RCC->DCKCFGR2, RCC_DCKCFGR2_I2C2SEL, (uint32_t)(__I2C2_CLKSOURCE__))
|
|
|
|
/** @brief Macro to get the I2C2 clock source.
|
|
* @retval The clock source can be one of the following values:
|
|
* @arg RCC_I2C2CLKSOURCE_PCLK1: PCLK1 selected as I2C2 clock
|
|
* @arg RCC_I2C2CLKSOURCE_HSI: HSI selected as I2C2 clock
|
|
* @arg RCC_I2C2CLKSOURCE_SYSCLK: System Clock selected as I2C2 clock
|
|
*/
|
|
#define __HAL_RCC_GET_I2C2_SOURCE() ((uint32_t)(READ_BIT(RCC->DCKCFGR2, RCC_DCKCFGR2_I2C2SEL)))
|
|
|
|
/** @brief Macro to configure the I2C3 clock (I2C3CLK).
|
|
*
|
|
* @param __I2C3_CLKSOURCE__: specifies the I2C3 clock source.
|
|
* This parameter can be one of the following values:
|
|
* @arg RCC_I2C3CLKSOURCE_PCLK1: PCLK1 selected as I2C3 clock
|
|
* @arg RCC_I2C3CLKSOURCE_HSI: HSI selected as I2C3 clock
|
|
* @arg RCC_I2C3CLKSOURCE_SYSCLK: System Clock selected as I2C3 clock
|
|
*/
|
|
#define __HAL_RCC_I2C3_CONFIG(__I2C3_CLKSOURCE__) \
|
|
MODIFY_REG(RCC->DCKCFGR2, RCC_DCKCFGR2_I2C3SEL, (uint32_t)(__I2C3_CLKSOURCE__))
|
|
|
|
/** @brief macro to get the I2C3 clock source.
|
|
* @retval The clock source can be one of the following values:
|
|
* @arg RCC_I2C3CLKSOURCE_PCLK1: PCLK1 selected as I2C3 clock
|
|
* @arg RCC_I2C3CLKSOURCE_HSI: HSI selected as I2C3 clock
|
|
* @arg RCC_I2C3CLKSOURCE_SYSCLK: System Clock selected as I2C3 clock
|
|
*/
|
|
#define __HAL_RCC_GET_I2C3_SOURCE() ((uint32_t)(READ_BIT(RCC->DCKCFGR2, RCC_DCKCFGR2_I2C3SEL)))
|
|
|
|
/** @brief Macro to configure the I2C4 clock (I2C4CLK).
|
|
*
|
|
* @param __I2C4_CLKSOURCE__: specifies the I2C4 clock source.
|
|
* This parameter can be one of the following values:
|
|
* @arg RCC_I2C4CLKSOURCE_PCLK1: PCLK1 selected as I2C4 clock
|
|
* @arg RCC_I2C4CLKSOURCE_HSI: HSI selected as I2C4 clock
|
|
* @arg RCC_I2C4CLKSOURCE_SYSCLK: System Clock selected as I2C4 clock
|
|
*/
|
|
#define __HAL_RCC_I2C4_CONFIG(__I2C4_CLKSOURCE__) \
|
|
MODIFY_REG(RCC->DCKCFGR2, RCC_DCKCFGR2_I2C4SEL, (uint32_t)(__I2C4_CLKSOURCE__))
|
|
|
|
/** @brief macro to get the I2C4 clock source.
|
|
* @retval The clock source can be one of the following values:
|
|
* @arg RCC_I2C4CLKSOURCE_PCLK1: PCLK1 selected as I2C4 clock
|
|
* @arg RCC_I2C4CLKSOURCE_HSI: HSI selected as I2C4 clock
|
|
* @arg RCC_I2C4CLKSOURCE_SYSCLK: System Clock selected as I2C4 clock
|
|
*/
|
|
#define __HAL_RCC_GET_I2C4_SOURCE() ((uint32_t)(READ_BIT(RCC->DCKCFGR2, RCC_DCKCFGR2_I2C4SEL)))
|
|
|
|
/** @brief Macro to configure the USART1 clock (USART1CLK).
|
|
*
|
|
* @param __USART1_CLKSOURCE__: specifies the USART1 clock source.
|
|
* This parameter can be one of the following values:
|
|
* @arg RCC_USART1CLKSOURCE_PCLK2: PCLK2 selected as USART1 clock
|
|
* @arg RCC_USART1CLKSOURCE_HSI: HSI selected as USART1 clock
|
|
* @arg RCC_USART1CLKSOURCE_SYSCLK: System Clock selected as USART1 clock
|
|
* @arg RCC_USART1CLKSOURCE_LSE: LSE selected as USART1 clock
|
|
*/
|
|
#define __HAL_RCC_USART1_CONFIG(__USART1_CLKSOURCE__) \
|
|
MODIFY_REG(RCC->DCKCFGR2, RCC_DCKCFGR2_USART1SEL, (uint32_t)(__USART1_CLKSOURCE__))
|
|
|
|
/** @brief macro to get the USART1 clock source.
|
|
* @retval The clock source can be one of the following values:
|
|
* @arg RCC_USART1CLKSOURCE_PCLK2: PCLK2 selected as USART1 clock
|
|
* @arg RCC_USART1CLKSOURCE_HSI: HSI selected as USART1 clock
|
|
* @arg RCC_USART1CLKSOURCE_SYSCLK: System Clock selected as USART1 clock
|
|
* @arg RCC_USART1CLKSOURCE_LSE: LSE selected as USART1 clock
|
|
*/
|
|
#define __HAL_RCC_GET_USART1_SOURCE() ((uint32_t)(READ_BIT(RCC->DCKCFGR2, RCC_DCKCFGR2_USART1SEL)))
|
|
|
|
/** @brief Macro to configure the USART2 clock (USART2CLK).
|
|
*
|
|
* @param __USART2_CLKSOURCE__: specifies the USART2 clock source.
|
|
* This parameter can be one of the following values:
|
|
* @arg RCC_USART2CLKSOURCE_PCLK1: PCLK1 selected as USART2 clock
|
|
* @arg RCC_USART2CLKSOURCE_HSI: HSI selected as USART2 clock
|
|
* @arg RCC_USART2CLKSOURCE_SYSCLK: System Clock selected as USART2 clock
|
|
* @arg RCC_USART2CLKSOURCE_LSE: LSE selected as USART2 clock
|
|
*/
|
|
#define __HAL_RCC_USART2_CONFIG(__USART2_CLKSOURCE__) \
|
|
MODIFY_REG(RCC->DCKCFGR2, RCC_DCKCFGR2_USART2SEL, (uint32_t)(__USART2_CLKSOURCE__))
|
|
|
|
/** @brief macro to get the USART2 clock source.
|
|
* @retval The clock source can be one of the following values:
|
|
* @arg RCC_USART2CLKSOURCE_PCLK1: PCLK1 selected as USART2 clock
|
|
* @arg RCC_USART2CLKSOURCE_HSI: HSI selected as USART2 clock
|
|
* @arg RCC_USART2CLKSOURCE_SYSCLK: System Clock selected as USART2 clock
|
|
* @arg RCC_USART2CLKSOURCE_LSE: LSE selected as USART2 clock
|
|
*/
|
|
#define __HAL_RCC_GET_USART2_SOURCE() ((uint32_t)(READ_BIT(RCC->DCKCFGR2, RCC_DCKCFGR2_USART2SEL)))
|
|
|
|
/** @brief Macro to configure the USART3 clock (USART3CLK).
|
|
*
|
|
* @param __USART3_CLKSOURCE__: specifies the USART3 clock source.
|
|
* This parameter can be one of the following values:
|
|
* @arg RCC_USART3CLKSOURCE_PCLK1: PCLK1 selected as USART3 clock
|
|
* @arg RCC_USART3CLKSOURCE_HSI: HSI selected as USART3 clock
|
|
* @arg RCC_USART3CLKSOURCE_SYSCLK: System Clock selected as USART3 clock
|
|
* @arg RCC_USART3CLKSOURCE_LSE: LSE selected as USART3 clock
|
|
*/
|
|
#define __HAL_RCC_USART3_CONFIG(__USART3_CLKSOURCE__) \
|
|
MODIFY_REG(RCC->DCKCFGR2, RCC_DCKCFGR2_USART3SEL, (uint32_t)(__USART3_CLKSOURCE__))
|
|
|
|
/** @brief macro to get the USART3 clock source.
|
|
* @retval The clock source can be one of the following values:
|
|
* @arg RCC_USART3CLKSOURCE_PCLK1: PCLK1 selected as USART3 clock
|
|
* @arg RCC_USART3CLKSOURCE_HSI: HSI selected as USART3 clock
|
|
* @arg RCC_USART3CLKSOURCE_SYSCLK: System Clock selected as USART3 clock
|
|
* @arg RCC_USART3CLKSOURCE_LSE: LSE selected as USART3 clock
|
|
*/
|
|
#define __HAL_RCC_GET_USART3_SOURCE() ((uint32_t)(READ_BIT(RCC->DCKCFGR2, RCC_DCKCFGR2_USART3SEL)))
|
|
|
|
/** @brief Macro to configure the UART4 clock (UART4CLK).
|
|
*
|
|
* @param __UART4_CLKSOURCE__: specifies the UART4 clock source.
|
|
* This parameter can be one of the following values:
|
|
* @arg RCC_UART4CLKSOURCE_PCLK1: PCLK1 selected as UART4 clock
|
|
* @arg RCC_UART4CLKSOURCE_HSI: HSI selected as UART4 clock
|
|
* @arg RCC_UART4CLKSOURCE_SYSCLK: System Clock selected as UART4 clock
|
|
* @arg RCC_UART4CLKSOURCE_LSE: LSE selected as UART4 clock
|
|
*/
|
|
#define __HAL_RCC_UART4_CONFIG(__UART4_CLKSOURCE__) \
|
|
MODIFY_REG(RCC->DCKCFGR2, RCC_DCKCFGR2_UART4SEL, (uint32_t)(__UART4_CLKSOURCE__))
|
|
|
|
/** @brief macro to get the UART4 clock source.
|
|
* @retval The clock source can be one of the following values:
|
|
* @arg RCC_UART4CLKSOURCE_PCLK1: PCLK1 selected as UART4 clock
|
|
* @arg RCC_UART4CLKSOURCE_HSI: HSI selected as UART4 clock
|
|
* @arg RCC_UART4CLKSOURCE_SYSCLK: System Clock selected as UART4 clock
|
|
* @arg RCC_UART4CLKSOURCE_LSE: LSE selected as UART4 clock
|
|
*/
|
|
#define __HAL_RCC_GET_UART4_SOURCE() ((uint32_t)(READ_BIT(RCC->DCKCFGR2, RCC_DCKCFGR2_UART4SEL)))
|
|
|
|
/** @brief Macro to configure the UART5 clock (UART5CLK).
|
|
*
|
|
* @param __UART5_CLKSOURCE__: specifies the UART5 clock source.
|
|
* This parameter can be one of the following values:
|
|
* @arg RCC_UART5CLKSOURCE_PCLK1: PCLK1 selected as UART5 clock
|
|
* @arg RCC_UART5CLKSOURCE_HSI: HSI selected as UART5 clock
|
|
* @arg RCC_UART5CLKSOURCE_SYSCLK: System Clock selected as UART5 clock
|
|
* @arg RCC_UART5CLKSOURCE_LSE: LSE selected as UART5 clock
|
|
*/
|
|
#define __HAL_RCC_UART5_CONFIG(__UART5_CLKSOURCE__) \
|
|
MODIFY_REG(RCC->DCKCFGR2, RCC_DCKCFGR2_UART5SEL, (uint32_t)(__UART5_CLKSOURCE__))
|
|
|
|
/** @brief macro to get the UART5 clock source.
|
|
* @retval The clock source can be one of the following values:
|
|
* @arg RCC_UART5CLKSOURCE_PCLK1: PCLK1 selected as UART5 clock
|
|
* @arg RCC_UART5CLKSOURCE_HSI: HSI selected as UART5 clock
|
|
* @arg RCC_UART5CLKSOURCE_SYSCLK: System Clock selected as UART5 clock
|
|
* @arg RCC_UART5CLKSOURCE_LSE: LSE selected as UART5 clock
|
|
*/
|
|
#define __HAL_RCC_GET_UART5_SOURCE() ((uint32_t)(READ_BIT(RCC->DCKCFGR2, RCC_DCKCFGR2_UART5SEL)))
|
|
|
|
/** @brief Macro to configure the USART6 clock (USART6CLK).
|
|
*
|
|
* @param __USART6_CLKSOURCE__: specifies the USART6 clock source.
|
|
* This parameter can be one of the following values:
|
|
* @arg RCC_USART6CLKSOURCE_PCLK1: PCLK1 selected as USART6 clock
|
|
* @arg RCC_USART6CLKSOURCE_HSI: HSI selected as USART6 clock
|
|
* @arg RCC_USART6CLKSOURCE_SYSCLK: System Clock selected as USART6 clock
|
|
* @arg RCC_USART6CLKSOURCE_LSE: LSE selected as USART6 clock
|
|
*/
|
|
#define __HAL_RCC_USART6_CONFIG(__USART6_CLKSOURCE__) \
|
|
MODIFY_REG(RCC->DCKCFGR2, RCC_DCKCFGR2_USART6SEL, (uint32_t)(__USART6_CLKSOURCE__))
|
|
|
|
/** @brief macro to get the USART6 clock source.
|
|
* @retval The clock source can be one of the following values:
|
|
* @arg RCC_USART6CLKSOURCE_PCLK1: PCLK1 selected as USART6 clock
|
|
* @arg RCC_USART6CLKSOURCE_HSI: HSI selected as USART6 clock
|
|
* @arg RCC_USART6CLKSOURCE_SYSCLK: System Clock selected as USART6 clock
|
|
* @arg RCC_USART6CLKSOURCE_LSE: LSE selected as USART6 clock
|
|
*/
|
|
#define __HAL_RCC_GET_USART6_SOURCE() ((uint32_t)(READ_BIT(RCC->DCKCFGR2, RCC_DCKCFGR2_USART6SEL)))
|
|
|
|
/** @brief Macro to configure the UART7 clock (UART7CLK).
|
|
*
|
|
* @param __UART7_CLKSOURCE__: specifies the UART7 clock source.
|
|
* This parameter can be one of the following values:
|
|
* @arg RCC_UART7CLKSOURCE_PCLK1: PCLK1 selected as UART7 clock
|
|
* @arg RCC_UART7CLKSOURCE_HSI: HSI selected as UART7 clock
|
|
* @arg RCC_UART7CLKSOURCE_SYSCLK: System Clock selected as UART7 clock
|
|
* @arg RCC_UART7CLKSOURCE_LSE: LSE selected as UART7 clock
|
|
*/
|
|
#define __HAL_RCC_UART7_CONFIG(__UART7_CLKSOURCE__) \
|
|
MODIFY_REG(RCC->DCKCFGR2, RCC_DCKCFGR2_UART7SEL, (uint32_t)(__UART7_CLKSOURCE__))
|
|
|
|
/** @brief macro to get the UART7 clock source.
|
|
* @retval The clock source can be one of the following values:
|
|
* @arg RCC_UART7CLKSOURCE_PCLK1: PCLK1 selected as UART7 clock
|
|
* @arg RCC_UART7CLKSOURCE_HSI: HSI selected as UART7 clock
|
|
* @arg RCC_UART7CLKSOURCE_SYSCLK: System Clock selected as UART7 clock
|
|
* @arg RCC_UART7CLKSOURCE_LSE: LSE selected as UART7 clock
|
|
*/
|
|
#define __HAL_RCC_GET_UART7_SOURCE() ((uint32_t)(READ_BIT(RCC->DCKCFGR2, RCC_DCKCFGR2_UART7SEL)))
|
|
|
|
/** @brief Macro to configure the UART8 clock (UART8CLK).
|
|
*
|
|
* @param __UART8_CLKSOURCE__: specifies the UART8 clock source.
|
|
* This parameter can be one of the following values:
|
|
* @arg RCC_UART8CLKSOURCE_PCLK1: PCLK1 selected as UART8 clock
|
|
* @arg RCC_UART8CLKSOURCE_HSI: HSI selected as UART8 clock
|
|
* @arg RCC_UART8CLKSOURCE_SYSCLK: System Clock selected as UART8 clock
|
|
* @arg RCC_UART8CLKSOURCE_LSE: LSE selected as UART8 clock
|
|
*/
|
|
#define __HAL_RCC_UART8_CONFIG(__UART8_CLKSOURCE__) \
|
|
MODIFY_REG(RCC->DCKCFGR2, RCC_DCKCFGR2_UART8SEL, (uint32_t)(__UART8_CLKSOURCE__))
|
|
|
|
/** @brief macro to get the UART8 clock source.
|
|
* @retval The clock source can be one of the following values:
|
|
* @arg RCC_UART8CLKSOURCE_PCLK1: PCLK1 selected as UART8 clock
|
|
* @arg RCC_UART8CLKSOURCE_HSI: HSI selected as UART8 clock
|
|
* @arg RCC_UART8CLKSOURCE_SYSCLK: System Clock selected as UART8 clock
|
|
* @arg RCC_UART8CLKSOURCE_LSE: LSE selected as UART8 clock
|
|
*/
|
|
#define __HAL_RCC_GET_UART8_SOURCE() ((uint32_t)(READ_BIT(RCC->DCKCFGR2, RCC_DCKCFGR2_UART8SEL)))
|
|
|
|
/** @brief Macro to configure the LPTIM1 clock (LPTIM1CLK).
|
|
*
|
|
* @param __LPTIM1_CLKSOURCE__: specifies the LPTIM1 clock source.
|
|
* This parameter can be one of the following values:
|
|
* @arg RCC_LPTIM1CLKSOURCE_PCLK: PCLK selected as LPTIM1 clock
|
|
* @arg RCC_LPTIM1CLKSOURCE_HSI: HSI selected as LPTIM1 clock
|
|
* @arg RCC_LPTIM1CLKSOURCE_LSI: LSI selected as LPTIM1 clock
|
|
* @arg RCC_LPTIM1CLKSOURCE_LSE: LSE selected as LPTIM1 clock
|
|
*/
|
|
#define __HAL_RCC_LPTIM1_CONFIG(__LPTIM1_CLKSOURCE__) \
|
|
MODIFY_REG(RCC->DCKCFGR2, RCC_DCKCFGR2_LPTIM1SEL, (uint32_t)(__LPTIM1_CLKSOURCE__))
|
|
|
|
/** @brief macro to get the LPTIM1 clock source.
|
|
* @retval The clock source can be one of the following values:
|
|
* @arg RCC_LPTIM1CLKSOURCE_PCLK: PCLK selected as LPTIM1 clock
|
|
* @arg RCC_LPTIM1CLKSOURCE_HSI: HSI selected as LPTIM1 clock
|
|
* @arg RCC_LPTIM1CLKSOURCE_LSI: LSI selected as LPTIM1 clock
|
|
* @arg RCC_LPTIM1CLKSOURCE_LSE: LSE selected as LPTIM1 clock
|
|
*/
|
|
#define __HAL_RCC_GET_LPTIM1_SOURCE() ((uint32_t)(READ_BIT(RCC->DCKCFGR2, RCC_DCKCFGR2_LPTIM1SEL)))
|
|
|
|
/** @brief Macro to configure the CEC clock (CECCLK).
|
|
*
|
|
* @param __CEC_CLKSOURCE__: specifies the CEC clock source.
|
|
* This parameter can be one of the following values:
|
|
* @arg RCC_CECCLKSOURCE_LSE: LSE selected as CEC clock
|
|
* @arg RCC_CECCLKSOURCE_HSI: HSI selected as CEC clock
|
|
*/
|
|
#define __HAL_RCC_CEC_CONFIG(__CEC_CLKSOURCE__) \
|
|
MODIFY_REG(RCC->DCKCFGR2, RCC_DCKCFGR2_CECSEL, (uint32_t)(__CEC_CLKSOURCE__))
|
|
|
|
/** @brief macro to get the CEC clock source.
|
|
* @retval The clock source can be one of the following values:
|
|
* @arg RCC_CECCLKSOURCE_LSE: LSE selected as CEC clock
|
|
* @arg RCC_CECCLKSOURCE_HSI: HSI selected as CEC clock
|
|
*/
|
|
#define __HAL_RCC_GET_CEC_SOURCE() ((uint32_t)(READ_BIT(RCC->DCKCFGR2, RCC_DCKCFGR2_CECSEL)))
|
|
|
|
/** @brief Macro to configure the CLK48 source (CLK48CLK).
|
|
*
|
|
* @param __CLK48_SOURCE__: specifies the CLK48 clock source.
|
|
* This parameter can be one of the following values:
|
|
* @arg RCC_CLK48SOURCE_PLL: PLL selected as CLK48 source
|
|
* @arg RCC_CLK48SOURCE_PLSAI1: PLLSAI1 selected as CLK48 source
|
|
*/
|
|
#define __HAL_RCC_CLK48_CONFIG(__CLK48_SOURCE__) \
|
|
MODIFY_REG(RCC->DCKCFGR2, RCC_DCKCFGR2_CK48MSEL, (uint32_t)(__CLK48_SOURCE__))
|
|
|
|
/** @brief macro to get the CLK48 source.
|
|
* @retval The clock source can be one of the following values:
|
|
* @arg RCC_CLK48SOURCE_PLL: PLL used as CLK48 source
|
|
* @arg RCC_CLK48SOURCE_PLSAI1: PLLSAI1 used as CLK48 source
|
|
*/
|
|
#define __HAL_RCC_GET_CLK48_SOURCE() ((uint32_t)(READ_BIT(RCC->DCKCFGR2, RCC_DCKCFGR2_CK48MSEL)))
|
|
|
|
/** @brief Macro to configure the SDMMC1 clock (SDMMC1CLK).
|
|
*
|
|
* @param __SDMMC1_CLKSOURCE__: specifies the SDMMC1 clock source.
|
|
* This parameter can be one of the following values:
|
|
* @arg RCC_SDMMC1CLKSOURCE_CLK48: CLK48 selected as SDMMC clock
|
|
* @arg RCC_SDMMC1CLKSOURCE_SYSCLK: SYSCLK selected as SDMMC clock
|
|
*/
|
|
#define __HAL_RCC_SDMMC1_CONFIG(__SDMMC1_CLKSOURCE__) \
|
|
MODIFY_REG(RCC->DCKCFGR2, RCC_DCKCFGR2_SDMMC1SEL, (uint32_t)(__SDMMC1_CLKSOURCE__))
|
|
|
|
/** @brief macro to get the SDMMC1 clock source.
|
|
* @retval The clock source can be one of the following values:
|
|
* @arg RCC_SDMMC1CLKSOURCE_CLK48: CLK48 selected as SDMMC1 clock
|
|
* @arg RCC_SDMMC1CLKSOURCE_SYSCLK: SYSCLK selected as SDMMC1 clock
|
|
*/
|
|
#define __HAL_RCC_GET_SDMMC1_SOURCE() ((uint32_t)(READ_BIT(RCC->DCKCFGR2, RCC_DCKCFGR2_SDMMC1SEL)))
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/* Exported functions --------------------------------------------------------*/
|
|
/** @addtogroup RCCEx_Exported_Functions_Group1
|
|
* @{
|
|
*/
|
|
HAL_StatusTypeDef HAL_RCCEx_PeriphCLKConfig(RCC_PeriphCLKInitTypeDef *PeriphClkInit);
|
|
void HAL_RCCEx_GetPeriphCLKConfig(RCC_PeriphCLKInitTypeDef *PeriphClkInit);
|
|
uint32_t HAL_RCCEx_GetPeriphCLKFreq(uint32_t PeriphClk);
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
/* Private macros ------------------------------------------------------------*/
|
|
/** @addtogroup RCCEx_Private_Macros RCCEx Private Macros
|
|
* @{
|
|
*/
|
|
/** @defgroup RCCEx_IS_RCC_Definitions RCC Private macros to check input parameters
|
|
* @{
|
|
*/
|
|
#if defined(STM32F756xx) || defined(STM32F746xx)
|
|
#define IS_RCC_PERIPHCLOCK(SELECTION) \
|
|
((((SELECTION) & RCC_PERIPHCLK_I2S) == RCC_PERIPHCLK_I2S) || \
|
|
(((SELECTION) & RCC_PERIPHCLK_LTDC) == RCC_PERIPHCLK_LTDC) || \
|
|
(((SELECTION) & RCC_PERIPHCLK_TIM) == RCC_PERIPHCLK_TIM) || \
|
|
(((SELECTION) & RCC_PERIPHCLK_USART1) == RCC_PERIPHCLK_USART1) || \
|
|
(((SELECTION) & RCC_PERIPHCLK_USART2) == RCC_PERIPHCLK_USART2) || \
|
|
(((SELECTION) & RCC_PERIPHCLK_USART3) == RCC_PERIPHCLK_USART3) || \
|
|
(((SELECTION) & RCC_PERIPHCLK_UART4) == RCC_PERIPHCLK_UART4) || \
|
|
(((SELECTION) & RCC_PERIPHCLK_UART5) == RCC_PERIPHCLK_UART5) || \
|
|
(((SELECTION) & RCC_PERIPHCLK_USART6) == RCC_PERIPHCLK_USART6) || \
|
|
(((SELECTION) & RCC_PERIPHCLK_UART7) == RCC_PERIPHCLK_UART7) || \
|
|
(((SELECTION) & RCC_PERIPHCLK_UART8) == RCC_PERIPHCLK_UART8) || \
|
|
(((SELECTION) & RCC_PERIPHCLK_I2C1) == RCC_PERIPHCLK_I2C1) || \
|
|
(((SELECTION) & RCC_PERIPHCLK_I2C2) == RCC_PERIPHCLK_I2C2) || \
|
|
(((SELECTION) & RCC_PERIPHCLK_I2C3) == RCC_PERIPHCLK_I2C3) || \
|
|
(((SELECTION) & RCC_PERIPHCLK_I2C4) == RCC_PERIPHCLK_I2C4) || \
|
|
(((SELECTION) & RCC_PERIPHCLK_LPTIM1) == RCC_PERIPHCLK_LPTIM1) || \
|
|
(((SELECTION) & RCC_PERIPHCLK_SAI1) == RCC_PERIPHCLK_SAI1) || \
|
|
(((SELECTION) & RCC_PERIPHCLK_SAI2) == RCC_PERIPHCLK_SAI2) || \
|
|
(((SELECTION) & RCC_PERIPHCLK_CLK48) == RCC_PERIPHCLK_CLK48) || \
|
|
(((SELECTION) & RCC_PERIPHCLK_CEC) == RCC_PERIPHCLK_CEC) || \
|
|
(((SELECTION) & RCC_PERIPHCLK_SDMMC1) == RCC_PERIPHCLK_SDMMC1) || \
|
|
(((SELECTION) & RCC_PERIPHCLK_SPDIFRX) == RCC_PERIPHCLK_SPDIFRX) || \
|
|
(((SELECTION) & RCC_PERIPHCLK_RTC) == RCC_PERIPHCLK_RTC))
|
|
#elif defined(STM32F745xx)
|
|
#define IS_RCC_PERIPHCLOCK(SELECTION) \
|
|
((((SELECTION) & RCC_PERIPHCLK_I2S) == RCC_PERIPHCLK_I2S) || \
|
|
(((SELECTION) & RCC_PERIPHCLK_TIM) == RCC_PERIPHCLK_TIM) || \
|
|
(((SELECTION) & RCC_PERIPHCLK_USART1) == RCC_PERIPHCLK_USART1) || \
|
|
(((SELECTION) & RCC_PERIPHCLK_USART2) == RCC_PERIPHCLK_USART2) || \
|
|
(((SELECTION) & RCC_PERIPHCLK_USART3) == RCC_PERIPHCLK_USART3) || \
|
|
(((SELECTION) & RCC_PERIPHCLK_UART4) == RCC_PERIPHCLK_UART4) || \
|
|
(((SELECTION) & RCC_PERIPHCLK_UART5) == RCC_PERIPHCLK_UART5) || \
|
|
(((SELECTION) & RCC_PERIPHCLK_USART6) == RCC_PERIPHCLK_USART6) || \
|
|
(((SELECTION) & RCC_PERIPHCLK_UART7) == RCC_PERIPHCLK_UART7) || \
|
|
(((SELECTION) & RCC_PERIPHCLK_UART8) == RCC_PERIPHCLK_UART8) || \
|
|
(((SELECTION) & RCC_PERIPHCLK_I2C1) == RCC_PERIPHCLK_I2C1) || \
|
|
(((SELECTION) & RCC_PERIPHCLK_I2C2) == RCC_PERIPHCLK_I2C2) || \
|
|
(((SELECTION) & RCC_PERIPHCLK_I2C3) == RCC_PERIPHCLK_I2C3) || \
|
|
(((SELECTION) & RCC_PERIPHCLK_I2C4) == RCC_PERIPHCLK_I2C4) || \
|
|
(((SELECTION) & RCC_PERIPHCLK_LPTIM1) == RCC_PERIPHCLK_LPTIM1) || \
|
|
(((SELECTION) & RCC_PERIPHCLK_SAI1) == RCC_PERIPHCLK_SAI1) || \
|
|
(((SELECTION) & RCC_PERIPHCLK_SAI2) == RCC_PERIPHCLK_SAI2) || \
|
|
(((SELECTION) & RCC_PERIPHCLK_CLK48) == RCC_PERIPHCLK_CLK48) || \
|
|
(((SELECTION) & RCC_PERIPHCLK_CEC) == RCC_PERIPHCLK_CEC) || \
|
|
(((SELECTION) & RCC_PERIPHCLK_SDMMC1) == RCC_PERIPHCLK_SDMMC1) || \
|
|
(((SELECTION) & RCC_PERIPHCLK_SPDIFRX) == RCC_PERIPHCLK_SPDIFRX) || \
|
|
(((SELECTION) & RCC_PERIPHCLK_RTC) == RCC_PERIPHCLK_RTC))
|
|
#endif /* STM32F756xx || STM32F746xx */
|
|
#define IS_RCC_PLLI2SN_VALUE(VALUE) ((49 <= (VALUE)) && ((VALUE) <= 432))
|
|
#define IS_RCC_PLLI2SP_VALUE(VALUE) ((2 <= (VALUE)) && ((VALUE) <= 8))
|
|
#define IS_RCC_PLLI2SQ_VALUE(VALUE) ((2 <= (VALUE)) && ((VALUE) <= 15))
|
|
#define IS_RCC_PLLI2SR_VALUE(VALUE) ((2 <= (VALUE)) && ((VALUE) <= 7))
|
|
|
|
#define IS_RCC_PLLSAIN_VALUE(VALUE) ((49 <= (VALUE)) && ((VALUE) <= 432))
|
|
#define IS_RCC_PLLSAIP_VALUE(VALUE) ((2 <= (VALUE)) && ((VALUE) <= 8))
|
|
#define IS_RCC_PLLSAIQ_VALUE(VALUE) ((2 <= (VALUE)) && ((VALUE) <= 15))
|
|
#define IS_RCC_PLLSAIR_VALUE(VALUE) ((2 <= (VALUE)) && ((VALUE) <= 7))
|
|
|
|
#define IS_RCC_PLLSAI_DIVQ_VALUE(VALUE) ((1 <= (VALUE)) && ((VALUE) <= 32))
|
|
|
|
#define IS_RCC_PLLI2S_DIVQ_VALUE(VALUE) ((1 <= (VALUE)) && ((VALUE) <= 32))
|
|
|
|
#define IS_RCC_PLLSAI_DIVR_VALUE(VALUE) (((VALUE) == RCC_PLLSAIDIVR_2) ||\
|
|
((VALUE) == RCC_PLLSAIDIVR_4) ||\
|
|
((VALUE) == RCC_PLLSAIDIVR_8) ||\
|
|
((VALUE) == RCC_PLLSAIDIVR_16))
|
|
#define IS_RCC_I2SCLKSOURCE(SOURCE) (((SOURCE) == RCC_I2SCLKSOURCE_PLLI2S) || \
|
|
((SOURCE) == RCC_I2SCLKSOURCE_EXT))
|
|
#define IS_RCC_SAI1CLKSOURCE(SOURCE) (((SOURCE) == RCC_SAI1CLKSOURCE_PLLSAI) || \
|
|
((SOURCE) == RCC_SAI1CLKSOURCE_PLLI2S) || \
|
|
((SOURCE) == RCC_SAI1CLKSOURCE_PIN))
|
|
#define IS_RCC_SAI2CLKSOURCE(SOURCE) (((SOURCE) == RCC_SAI2CLKSOURCE_PLLSAI) || \
|
|
((SOURCE) == RCC_SAI2CLKSOURCE_PLLI2S) || \
|
|
((SOURCE) == RCC_SAI2CLKSOURCE_PIN))
|
|
|
|
#define IS_RCC_SDMMC1CLKSOURCE(SOURCE) (((SOURCE) == RCC_SDMMC1CLKSOURCE_SYSCLK) || \
|
|
((SOURCE) == RCC_SDMMC1CLKSOURCE_CLK48))
|
|
|
|
#define IS_RCC_CECCLKSOURCE(SOURCE) (((SOURCE) == RCC_CECCLKSOURCE_HSI) || \
|
|
((SOURCE) == RCC_CECCLKSOURCE_LSE))
|
|
#define IS_RCC_USART1CLKSOURCE(SOURCE) \
|
|
(((SOURCE) == RCC_USART1CLKSOURCE_PCLK2) || \
|
|
((SOURCE) == RCC_USART1CLKSOURCE_SYSCLK) || \
|
|
((SOURCE) == RCC_USART1CLKSOURCE_LSE) || \
|
|
((SOURCE) == RCC_USART1CLKSOURCE_HSI))
|
|
|
|
#define IS_RCC_USART2CLKSOURCE(SOURCE) \
|
|
(((SOURCE) == RCC_USART2CLKSOURCE_PCLK1) || \
|
|
((SOURCE) == RCC_USART2CLKSOURCE_SYSCLK) || \
|
|
((SOURCE) == RCC_USART2CLKSOURCE_LSE) || \
|
|
((SOURCE) == RCC_USART2CLKSOURCE_HSI))
|
|
#define IS_RCC_USART3CLKSOURCE(SOURCE) \
|
|
(((SOURCE) == RCC_USART3CLKSOURCE_PCLK1) || \
|
|
((SOURCE) == RCC_USART3CLKSOURCE_SYSCLK) || \
|
|
((SOURCE) == RCC_USART3CLKSOURCE_LSE) || \
|
|
((SOURCE) == RCC_USART3CLKSOURCE_HSI))
|
|
|
|
#define IS_RCC_UART4CLKSOURCE(SOURCE) \
|
|
(((SOURCE) == RCC_UART4CLKSOURCE_PCLK1) || \
|
|
((SOURCE) == RCC_UART4CLKSOURCE_SYSCLK) || \
|
|
((SOURCE) == RCC_UART4CLKSOURCE_LSE) || \
|
|
((SOURCE) == RCC_UART4CLKSOURCE_HSI))
|
|
|
|
#define IS_RCC_UART5CLKSOURCE(SOURCE) \
|
|
(((SOURCE) == RCC_UART5CLKSOURCE_PCLK1) || \
|
|
((SOURCE) == RCC_UART5CLKSOURCE_SYSCLK) || \
|
|
((SOURCE) == RCC_UART5CLKSOURCE_LSE) || \
|
|
((SOURCE) == RCC_UART5CLKSOURCE_HSI))
|
|
|
|
#define IS_RCC_USART6CLKSOURCE(SOURCE) \
|
|
(((SOURCE) == RCC_USART6CLKSOURCE_PCLK2) || \
|
|
((SOURCE) == RCC_USART6CLKSOURCE_SYSCLK) || \
|
|
((SOURCE) == RCC_USART6CLKSOURCE_LSE) || \
|
|
((SOURCE) == RCC_USART6CLKSOURCE_HSI))
|
|
|
|
#define IS_RCC_UART7CLKSOURCE(SOURCE) \
|
|
(((SOURCE) == RCC_UART7CLKSOURCE_PCLK1) || \
|
|
((SOURCE) == RCC_UART7CLKSOURCE_SYSCLK) || \
|
|
((SOURCE) == RCC_UART7CLKSOURCE_LSE) || \
|
|
((SOURCE) == RCC_UART7CLKSOURCE_HSI))
|
|
|
|
#define IS_RCC_UART8CLKSOURCE(SOURCE) \
|
|
(((SOURCE) == RCC_UART8CLKSOURCE_PCLK1) || \
|
|
((SOURCE) == RCC_UART8CLKSOURCE_SYSCLK) || \
|
|
((SOURCE) == RCC_UART8CLKSOURCE_LSE) || \
|
|
((SOURCE) == RCC_UART8CLKSOURCE_HSI))
|
|
#define IS_RCC_I2C1CLKSOURCE(SOURCE) \
|
|
(((SOURCE) == RCC_I2C1CLKSOURCE_PCLK1) || \
|
|
((SOURCE) == RCC_I2C1CLKSOURCE_SYSCLK)|| \
|
|
((SOURCE) == RCC_I2C1CLKSOURCE_HSI))
|
|
#define IS_RCC_I2C2CLKSOURCE(SOURCE) \
|
|
(((SOURCE) == RCC_I2C2CLKSOURCE_PCLK1) || \
|
|
((SOURCE) == RCC_I2C2CLKSOURCE_SYSCLK)|| \
|
|
((SOURCE) == RCC_I2C2CLKSOURCE_HSI))
|
|
|
|
#define IS_RCC_I2C3CLKSOURCE(SOURCE) \
|
|
(((SOURCE) == RCC_I2C3CLKSOURCE_PCLK1) || \
|
|
((SOURCE) == RCC_I2C3CLKSOURCE_SYSCLK)|| \
|
|
((SOURCE) == RCC_I2C3CLKSOURCE_HSI))
|
|
#define IS_RCC_I2C4CLKSOURCE(SOURCE) \
|
|
(((SOURCE) == RCC_I2C4CLKSOURCE_PCLK1) || \
|
|
((SOURCE) == RCC_I2C4CLKSOURCE_SYSCLK)|| \
|
|
((SOURCE) == RCC_I2C4CLKSOURCE_HSI))
|
|
#define IS_RCC_LPTIM1CLK(SOURCE) \
|
|
(((SOURCE) == RCC_LPTIM1CLKSOURCE_PCLK) || \
|
|
((SOURCE) == RCC_LPTIM1CLKSOURCE_LSI) || \
|
|
((SOURCE) == RCC_LPTIM1CLKSOURCE_HSI) || \
|
|
((SOURCE) == RCC_LPTIM1CLKSOURCE_LSE))
|
|
#define IS_RCC_CLK48SOURCE(SOURCE) \
|
|
(((SOURCE) == RCC_CLK48SOURCE_PLLSAIP) || \
|
|
((SOURCE) == RCC_CLK48SOURCE_PLL))
|
|
#define IS_RCC_TIMPRES(VALUE) \
|
|
(((VALUE) == RCC_TIMPRES_DESACTIVATED) || \
|
|
((VALUE) == RCC_TIMPRES_ACTIVATED))
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
#ifdef __cplusplus
|
|
}
|
|
#endif
|
|
|
|
#endif /* __STM32F7xx_HAL_RCC_EX_H */
|
|
|
|
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|