76 lines
2.4 KiB
ReStructuredText
76 lines
2.4 KiB
ReStructuredText
GPIO Pins
|
|
=========
|
|
|
|
The way to connect your board to the external world, and control other
|
|
components, is through the GPIO pins. Not all pins are available to use,
|
|
in most cases only pins 0, 2, 4, 5, 12, 13, 14, 15, and 16 can be used.
|
|
|
|
The pins are available in the machine module, so make sure you import that
|
|
first. Then you can create a pin using::
|
|
|
|
>>> pin = machine.Pin(0)
|
|
|
|
Here, the "0" is the pin that you want to access. Usually you want to
|
|
configure the pin to be input or output, and you do this when constructing
|
|
it. To make an input pin use::
|
|
|
|
>>> pin = machine.Pin(0, machine.Pin.OUT, machine.Pin.PULL_UP)
|
|
|
|
You can either use PULL_UP or PULL_NONE for the input pull-mode. If it's
|
|
not specified then it defaults to PULL_NONE. You can read the value on
|
|
the pin using::
|
|
|
|
>>> pin.value()
|
|
0
|
|
|
|
The pin on your board may return 0 or 1 here, depending on what it's connected
|
|
to. To make an output pin use::
|
|
|
|
>>> pin = machine.Pin(0, machine.Pin.OUT)
|
|
|
|
Then set its value using::
|
|
|
|
>>> pin.value(0)
|
|
>>> pin.value(1)
|
|
|
|
Or::
|
|
|
|
>>> pin.low()
|
|
>>> pin.high()
|
|
|
|
External interrupts
|
|
-------------------
|
|
|
|
All pins except number 16 can be configured to trigger a hard interrupt if their
|
|
input changes. You can set code (a callback function) to be executed on the
|
|
trigger.
|
|
|
|
Let's first define a callback function, which must take a single argument,
|
|
being the pin that triggered the function. We will make the function just print
|
|
the pin::
|
|
|
|
>>> def callback(p):
|
|
... print('pin change', p)
|
|
|
|
Next we will create two pins and configure them as inputs::
|
|
|
|
>>> from machine import Pin
|
|
>>> p0 = Pin(0, Pin.IN)
|
|
>>> p2 = Pin(2, Pin.IN)
|
|
|
|
An finally we need to tell the pins when to trigger, and the function to call
|
|
when they detect an event::
|
|
|
|
>>> p0.irq(Pin.IRQ_FALLING, callback)
|
|
>>> p2.irq(Pin.IRQ_RISING | Pin.IRQ_FALLING, callback)
|
|
|
|
We set pin 0 to trigger only on a falling edge of the input (when it goes from
|
|
high to low), and set pin 2 to trigger on both a rising and falling edge. After
|
|
entering this code you can apply high and low voltages to pins 0 and 2 to see
|
|
the interrupt being executed.
|
|
|
|
A hard interrupt will trigger as soon as the event occurs and will interrupt any
|
|
running code, including Python code. As such your callback functions are
|
|
limited in what they can do (they cannot allocate memory, for example) and
|
|
should be as short and simple as possible.
|