micropython/ports/mimxrt
Damien George 1892d03740 mimxrt,stm32: Enable MICROPY_PY_USSL_FINALISER.
This is needed because these ports allocate mbedtls data on the MicroPython
heap, and SSL socket objects must be fully cleaned up when they are garbage
collected, to free this memory allocated by mbedtls.  As part of this,
gc_sweep_all() will now ensure that the MP_STATE_PORT(mbedtls_memory)
linked-list is fully deallocated on soft reset.

Signed-off-by: Damien George <damien@micropython.org>
2022-01-08 00:02:04 +11:00
..
boards mimxrt: Tidy up the board flash related files. 2021-12-14 20:31:20 +01:00
hal mimxrt/hal: Allow readSampleClkSrc to be configured by a board. 2022-01-04 15:42:12 +11:00
lwip_inc mimxrt: Re-Enable eth checksum creation by HW. 2021-12-14 08:07:52 +01:00
mbedtls mimxrt/eth: Add LAN support and integrate the network module. 2021-10-25 15:14:26 +11:00
modules mimxrt/sdcard: Implement SDCard driver. 2021-09-07 20:45:33 +02:00
Makefile mimxrt: Tidy up the board flash related files. 2021-12-14 20:31:20 +01:00
README.md mimxrt: Extend the help() message and README.md. 2021-10-25 23:52:08 +11:00
board_init.c mimxrt/eth: Add LAN support and integrate the network module. 2021-10-25 15:14:26 +11:00
dma_channel.c mimxrt/dma_channel: Fix the DMA channel management. 2021-10-25 15:50:44 +11:00
dma_channel.h mimxrt/machine_spi: Add the SPI class to the machine module. 2021-06-26 22:14:47 +10:00
eth.c mimxrt: Add a driver for the DP83848 PHY device. 2021-12-14 08:07:52 +01:00
eth.h mimxrt: Add a driver for the DP83848 PHY device. 2021-12-14 08:07:52 +01:00
fatfs_port.c mimxrt/sdcard: Implement SDCard driver. 2021-09-07 20:45:33 +02:00
led.c mimxrt: Implement machine.Pin class. 2021-05-26 00:12:42 +10:00
led.h mimxrt: Implement machine.Pin class. 2021-05-26 00:12:42 +10:00
machine_adc.c mimxrt/machine_adc: Add the ADC class to the machine module. 2021-06-04 00:51:58 +10:00
machine_bitstream.c mimxrt: Fix cycle counter for time.ticks_cpu() and machine.bitstream(). 2021-10-25 15:50:44 +11:00
machine_i2c.c mimxrt/machine_i2c: Add hardware-based machine.I2C to machine module. 2021-07-15 00:36:31 +10:00
machine_led.c mimxrt/machine_led: Use mp_raise_msg_varg helper. 2021-07-15 00:12:41 +10:00
machine_pin.c mimxrt/machine_pin: Implement ioctl for Pin. 2021-08-16 15:03:50 +10:00
machine_pwm.c mimxrt: Support PWM using the FLEXPWM and QTMR modules. 2021-11-24 13:48:27 +11:00
machine_rtc.c all: Update to point to files in new shared/ directory. 2021-07-12 17:08:10 +10:00
machine_sdcard.c mimxrt/sdcard: Implement SDCard driver. 2021-09-07 20:45:33 +02:00
machine_spi.c mimxrt/machine_spi: Add the SPI class to the machine module. 2021-06-26 22:14:47 +10:00
machine_timer.c mimxrt/machine_timer: Leave the Timer clock source at IPG clock. 2021-06-03 13:03:02 +10:00
machine_uart.c mimxrt: Define UART 0 on MIMXRT boards. 2021-12-14 08:07:52 +01:00
machine_wdt.c mimxrt/modmachine: Implement machine.WDT() and machine.reset_cause(). 2021-10-25 15:43:56 +11:00
main.c py/runtime: Allow initialising sys.path/argv with defaults. 2021-12-18 00:08:07 +11:00
mimxrt_flash.c mimxrt: Use -Og instead of -O0 for DEBUG builds. 2021-12-14 08:07:52 +01:00
mimxrt_sdram.c mimxrt/sdram: Add SDRAM support. 2021-10-22 08:23:24 +02:00
modmachine.c mimxrt: Refactor the reading of the machine id. 2021-12-14 08:07:52 +01:00
modmachine.h mimxrt: Support PWM using the FLEXPWM and QTMR modules. 2021-11-24 13:48:27 +11:00
modmimxrt.c mimxrt: Add dht_readinto() to the mimxrt module, and freeze dht.py. 2021-10-25 23:49:28 +11:00
modmimxrt.h mimxrt: Add flash storage support with VFS and littlefs filesystem. 2021-06-01 23:42:57 +10:00
moduos.c mimxrt/eth: Add LAN support and integrate the network module. 2021-10-25 15:14:26 +11:00
modutime.c all: Update to point to files in new shared/ directory. 2021-07-12 17:08:10 +10:00
mpconfigport.h mimxrt,stm32: Enable MICROPY_PY_USSL_FINALISER. 2022-01-08 00:02:04 +11:00
mphalport.c mimxrt: Refactor the reading of the machine id. 2021-12-14 08:07:52 +01:00
mphalport.h mimxrt: Refactor the reading of the machine id. 2021-12-14 08:07:52 +01:00
mpnetworkport.c mimxrt/eth: Add LAN support and integrate the network module. 2021-10-25 15:14:26 +11:00
network_lan.c mimxrt: Add a driver for the DP83848 PHY device. 2021-12-14 08:07:52 +01:00
pendsv.c mimxrt/eth: Add LAN support and integrate the network module. 2021-10-25 15:14:26 +11:00
pendsv.h mimxrt/eth: Add LAN support and integrate the network module. 2021-10-25 15:14:26 +11:00
pin.c mimxrt/eth: Add LAN support and integrate the network module. 2021-10-25 15:14:26 +11:00
pin.h mimxrt/sdram: Add SDRAM support. 2021-10-22 08:23:24 +02:00
qstrdefsport.h mimxrt: Add new, minimal port to NXP i.MX RT series CPUs. 2020-03-11 15:34:13 +11:00
sdcard.c mimxrt: Fix a tiny unnoticed bug in sdcard.c. 2021-12-14 08:07:52 +01:00
sdcard.h mimxrt/sdcard: Implement SDCard driver. 2021-09-07 20:45:33 +02:00
systick.c mimxrt/eth: Add LAN support and integrate the network module. 2021-10-25 15:14:26 +11:00
systick.h mimxrt/eth: Add LAN support and integrate the network module. 2021-10-25 15:14:26 +11:00
ticks.c mimxrt: Enable ticks_cpu at boot time for NDEBUG builds only. 2021-12-14 08:07:52 +01:00
ticks.h mimxrt: Improve ticks and sleep functions using GPT. 2021-05-18 22:36:32 +10:00
tusb_config.h ports: Update to build with new tinyusb. 2021-02-12 12:50:36 +11:00
tusb_port.c ports: Rename USBD_VID/PID config macros to MICROPY_HW_USB_VID/PID. 2021-08-07 23:13:55 +10:00

README.md

Port of MicroPython to NXP iMX RT 10xx

Currently supports Teensy 4.0, Teensy 4.1, and the MIMXRT1010_EVK, MIMXRT1020_EVK, MIMXRT1050_EVK, MIMXRT1060_EVK and MIMXRT1064_EVK boards.

Features:

  • REPL over USB VCP
  • machine.ADC
  • machine.I2C
  • machine.LED
  • machine.Pin
  • machine.PWM
  • machine.RTC
  • machine.SDCard
  • machine.SPI
  • machine.Signal
  • machine.SoftI2C
  • machine.SoftSPI
  • machine.Timer
  • machine.UART
  • LFS2 file system at the internal Flash
  • SDCard support (not on MIMXRT1010_EVK)
  • Ethernet (not on Teensy 4.0 and MIMXRT1010_EVK)

Known issues:

TODO:

  • More peripherals (Counter, I2S, CAN, etc)
  • More Python options