236 lines
8.1 KiB
C
236 lines
8.1 KiB
C
/******************************************************************************
|
|
* Copyright 2013-2014 Espressif Systems (Wuxi)
|
|
*
|
|
* FileName: uart.c
|
|
*
|
|
* Description: Two UART mode configration and interrupt handler.
|
|
* Check your hardware connection while use this mode.
|
|
*
|
|
* Modification history:
|
|
* 2014/3/12, v1.0 create this file.
|
|
*******************************************************************************/
|
|
#include "ets_sys.h"
|
|
#include "osapi.h"
|
|
#include "uart.h"
|
|
#include "osapi.h"
|
|
#include "uart_register.h"
|
|
#include "etshal.h"
|
|
#include "c_types.h"
|
|
#include "user_interface.h"
|
|
#include "esp_mphal.h"
|
|
|
|
#define RX_BUF_SIZE (256)
|
|
#define UART_REPL UART0
|
|
|
|
// UartDev is defined and initialized in rom code.
|
|
extern UartDevice UartDev;
|
|
|
|
// circular buffer for RX buffering
|
|
static uint16_t rx_buf_in;
|
|
static uint16_t rx_buf_out;
|
|
static uint8_t rx_buf[RX_BUF_SIZE];
|
|
|
|
static os_event_t uart_evt_queue[16];
|
|
|
|
static void uart0_rx_intr_handler(void *para);
|
|
|
|
/******************************************************************************
|
|
* FunctionName : uart_config
|
|
* Description : Internal used function
|
|
* UART0 used for data TX/RX, RX buffer size is 0x100, interrupt enabled
|
|
* UART1 just used for debug output
|
|
* Parameters : uart_no, use UART0 or UART1 defined ahead
|
|
* Returns : NONE
|
|
*******************************************************************************/
|
|
static void ICACHE_FLASH_ATTR uart_config(uint8 uart_no) {
|
|
if (uart_no == UART1) {
|
|
PIN_FUNC_SELECT(PERIPHS_IO_MUX_GPIO2_U, FUNC_U1TXD_BK);
|
|
} else {
|
|
ETS_UART_INTR_ATTACH(uart0_rx_intr_handler, NULL);
|
|
PIN_PULLUP_DIS(PERIPHS_IO_MUX_U0TXD_U);
|
|
PIN_FUNC_SELECT(PERIPHS_IO_MUX_U0TXD_U, FUNC_U0TXD);
|
|
PIN_FUNC_SELECT(PERIPHS_IO_MUX_MTDO_U, FUNC_U0RTS);
|
|
}
|
|
|
|
uart_div_modify(uart_no, UART_CLK_FREQ / (UartDev.baut_rate));
|
|
|
|
WRITE_PERI_REG(UART_CONF0(uart_no), UartDev.exist_parity
|
|
| UartDev.parity
|
|
| (UartDev.stop_bits << UART_STOP_BIT_NUM_S)
|
|
| (UartDev.data_bits << UART_BIT_NUM_S));
|
|
|
|
// clear rx and tx fifo,not ready
|
|
SET_PERI_REG_MASK(UART_CONF0(uart_no), UART_RXFIFO_RST | UART_TXFIFO_RST);
|
|
CLEAR_PERI_REG_MASK(UART_CONF0(uart_no), UART_RXFIFO_RST | UART_TXFIFO_RST);
|
|
|
|
if (uart_no == UART0) {
|
|
// set rx fifo trigger
|
|
WRITE_PERI_REG(UART_CONF1(uart_no),
|
|
((0x10 & UART_RXFIFO_FULL_THRHD) << UART_RXFIFO_FULL_THRHD_S) |
|
|
((0x10 & UART_RX_FLOW_THRHD) << UART_RX_FLOW_THRHD_S) |
|
|
UART_RX_FLOW_EN |
|
|
(0x02 & UART_RX_TOUT_THRHD) << UART_RX_TOUT_THRHD_S |
|
|
UART_RX_TOUT_EN);
|
|
SET_PERI_REG_MASK(UART_INT_ENA(uart_no), UART_RXFIFO_TOUT_INT_ENA |
|
|
UART_FRM_ERR_INT_ENA);
|
|
} else {
|
|
WRITE_PERI_REG(UART_CONF1(uart_no),
|
|
((UartDev.rcv_buff.TrigLvl & UART_RXFIFO_FULL_THRHD) << UART_RXFIFO_FULL_THRHD_S));
|
|
}
|
|
|
|
// clear all interrupt
|
|
WRITE_PERI_REG(UART_INT_CLR(uart_no), 0xffff);
|
|
// enable rx_interrupt
|
|
SET_PERI_REG_MASK(UART_INT_ENA(uart_no), UART_RXFIFO_FULL_INT_ENA);
|
|
|
|
// init RX buffer
|
|
rx_buf_in = 0;
|
|
rx_buf_out = 0;
|
|
}
|
|
|
|
/******************************************************************************
|
|
* FunctionName : uart1_tx_one_char
|
|
* Description : Internal used function
|
|
* Use uart1 interface to transfer one char
|
|
* Parameters : uint8 TxChar - character to tx
|
|
* Returns : OK
|
|
*******************************************************************************/
|
|
void uart_tx_one_char(uint8 uart, uint8 TxChar) {
|
|
while (true) {
|
|
uint32 fifo_cnt = READ_PERI_REG(UART_STATUS(uart)) & (UART_TXFIFO_CNT<<UART_TXFIFO_CNT_S);
|
|
if ((fifo_cnt >> UART_TXFIFO_CNT_S & UART_TXFIFO_CNT) < 126) {
|
|
break;
|
|
}
|
|
}
|
|
WRITE_PERI_REG(UART_FIFO(uart), TxChar);
|
|
}
|
|
|
|
/******************************************************************************
|
|
* FunctionName : uart1_write_char
|
|
* Description : Internal used function
|
|
* Do some special deal while tx char is '\r' or '\n'
|
|
* Parameters : char c - character to tx
|
|
* Returns : NONE
|
|
*******************************************************************************/
|
|
static void ICACHE_FLASH_ATTR
|
|
uart_os_write_char(char c) {
|
|
if (c == '\n') {
|
|
uart_tx_one_char(UART_OS, '\r');
|
|
uart_tx_one_char(UART_OS, '\n');
|
|
} else if (c == '\r') {
|
|
} else {
|
|
uart_tx_one_char(UART_OS, c);
|
|
}
|
|
}
|
|
|
|
/******************************************************************************
|
|
* FunctionName : uart0_rx_intr_handler
|
|
* Description : Internal used function
|
|
* UART0 interrupt handler, add self handle code inside
|
|
* Parameters : void *para - point to ETS_UART_INTR_ATTACH's arg
|
|
* Returns : NONE
|
|
*******************************************************************************/
|
|
|
|
static void uart0_rx_intr_handler(void *para) {
|
|
/* uart0 and uart1 intr combine togther, when interrupt occur, see reg 0x3ff20020, bit2, bit0 represents
|
|
* uart1 and uart0 respectively
|
|
*/
|
|
|
|
uint8 uart_no = UART_REPL;
|
|
|
|
if (UART_FRM_ERR_INT_ST == (READ_PERI_REG(UART_INT_ST(uart_no)) & UART_FRM_ERR_INT_ST)) {
|
|
// frame error
|
|
WRITE_PERI_REG(UART_INT_CLR(uart_no), UART_FRM_ERR_INT_CLR);
|
|
}
|
|
|
|
if (UART_RXFIFO_FULL_INT_ST == (READ_PERI_REG(UART_INT_ST(uart_no)) & UART_RXFIFO_FULL_INT_ST)) {
|
|
// fifo full
|
|
goto read_chars;
|
|
} else if (UART_RXFIFO_TOUT_INT_ST == (READ_PERI_REG(UART_INT_ST(uart_no)) & UART_RXFIFO_TOUT_INT_ST)) {
|
|
read_chars:
|
|
#if 1 //MICROPY_REPL_EVENT_DRIVEN is not available here
|
|
ETS_UART_INTR_DISABLE();
|
|
system_os_post(UART_TASK_ID, 0, 0);
|
|
#else
|
|
while (READ_PERI_REG(UART_STATUS(uart_no)) & (UART_RXFIFO_CNT << UART_RXFIFO_CNT_S)) {
|
|
uint8 RcvChar = READ_PERI_REG(UART_FIFO(uart_no)) & 0xff;
|
|
uint16_t rx_buf_in_next = (rx_buf_in + 1) % RX_BUF_SIZE;
|
|
if (rx_buf_in_next != rx_buf_out) {
|
|
rx_buf[rx_buf_in] = RcvChar;
|
|
rx_buf_in = rx_buf_in_next;
|
|
}
|
|
}
|
|
#endif
|
|
}
|
|
}
|
|
|
|
int uart0_rx(void) {
|
|
if (rx_buf_out != rx_buf_in) {
|
|
int chr = rx_buf[rx_buf_out];
|
|
rx_buf_out = (rx_buf_out + 1) % RX_BUF_SIZE;
|
|
return chr;
|
|
} else {
|
|
return -1;
|
|
}
|
|
}
|
|
|
|
int uart_rx_one_char(uint8 uart_no) {
|
|
if (READ_PERI_REG(UART_STATUS(uart_no)) & (UART_RXFIFO_CNT << UART_RXFIFO_CNT_S)) {
|
|
return READ_PERI_REG(UART_FIFO(uart_no)) & 0xff;
|
|
}
|
|
return -1;
|
|
}
|
|
|
|
/******************************************************************************
|
|
* FunctionName : uart_init
|
|
* Description : user interface for init uart
|
|
* Parameters : UartBautRate uart0_br - uart0 bautrate
|
|
* UartBautRate uart1_br - uart1 bautrate
|
|
* Returns : NONE
|
|
*******************************************************************************/
|
|
void ICACHE_FLASH_ATTR uart_init(UartBautRate uart0_br, UartBautRate uart1_br) {
|
|
// rom use 74880 baut_rate, here reinitialize
|
|
UartDev.baut_rate = uart0_br;
|
|
uart_config(UART0);
|
|
UartDev.baut_rate = uart1_br;
|
|
uart_config(UART1);
|
|
ETS_UART_INTR_ENABLE();
|
|
|
|
// install uart1 putc callback
|
|
os_install_putc1((void *)uart_os_write_char);
|
|
}
|
|
|
|
void ICACHE_FLASH_ATTR uart_reattach() {
|
|
uart_init(UART_BIT_RATE_74880, UART_BIT_RATE_74880);
|
|
}
|
|
|
|
// Task-based UART interface
|
|
|
|
#include "py/obj.h"
|
|
#include "lib/utils/pyexec.h"
|
|
|
|
void soft_reset(void);
|
|
|
|
void uart_task_handler(os_event_t *evt) {
|
|
int c, ret = 0;
|
|
while ((c = uart_rx_one_char(UART_REPL)) >= 0) {
|
|
ret = pyexec_event_repl_process_char(c);
|
|
if (ret & PYEXEC_FORCED_EXIT) {
|
|
break;
|
|
}
|
|
}
|
|
|
|
// Clear pending FIFO interrupts
|
|
WRITE_PERI_REG(UART_INT_CLR(UART_REPL), UART_RXFIFO_TOUT_INT_CLR | UART_RXFIFO_FULL_INT_ST);
|
|
// Enable UART interrupts, so our task will receive events again from IRQ handler
|
|
ETS_UART_INTR_ENABLE();
|
|
|
|
if (ret & PYEXEC_FORCED_EXIT) {
|
|
soft_reset();
|
|
}
|
|
}
|
|
|
|
void uart_task_init() {
|
|
system_os_task(uart_task_handler, UART_TASK_ID, uart_evt_queue, sizeof(uart_evt_queue) / sizeof(*uart_evt_queue));
|
|
}
|