6591 lines
395 KiB
C
6591 lines
395 KiB
C
/**
|
|
******************************************************************************
|
|
* @file stm32f4xx_hal_rcc_ex.h
|
|
* @author MCD Application Team
|
|
* @version V1.5.2
|
|
* @date 22-September-2016
|
|
* @brief Header file of RCC HAL Extension module.
|
|
******************************************************************************
|
|
* @attention
|
|
*
|
|
* <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without modification,
|
|
* are permitted provided that the following conditions are met:
|
|
* 1. Redistributions of source code must retain the above copyright notice,
|
|
* this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright notice,
|
|
* this list of conditions and the following disclaimer in the documentation
|
|
* and/or other materials provided with the distribution.
|
|
* 3. Neither the name of STMicroelectronics nor the names of its contributors
|
|
* may be used to endorse or promote products derived from this software
|
|
* without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
|
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
|
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
|
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
|
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
|
|
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
|
|
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
|
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
*
|
|
******************************************************************************
|
|
*/
|
|
|
|
/* Define to prevent recursive inclusion -------------------------------------*/
|
|
#ifndef __STM32F4xx_HAL_RCC_EX_H
|
|
#define __STM32F4xx_HAL_RCC_EX_H
|
|
|
|
#ifdef __cplusplus
|
|
extern "C" {
|
|
#endif
|
|
|
|
/* Includes ------------------------------------------------------------------*/
|
|
#include "stm32f4xx_hal_def.h"
|
|
|
|
/** @addtogroup STM32F4xx_HAL_Driver
|
|
* @{
|
|
*/
|
|
|
|
/** @addtogroup RCCEx
|
|
* @{
|
|
*/
|
|
|
|
/* Exported types ------------------------------------------------------------*/
|
|
/** @defgroup RCCEx_Exported_Types RCCEx Exported Types
|
|
* @{
|
|
*/
|
|
|
|
/**
|
|
* @brief RCC PLL configuration structure definition
|
|
*/
|
|
typedef struct
|
|
{
|
|
uint32_t PLLState; /*!< The new state of the PLL.
|
|
This parameter can be a value of @ref RCC_PLL_Config */
|
|
|
|
uint32_t PLLSource; /*!< RCC_PLLSource: PLL entry clock source.
|
|
This parameter must be a value of @ref RCC_PLL_Clock_Source */
|
|
|
|
uint32_t PLLM; /*!< PLLM: Division factor for PLL VCO input clock.
|
|
This parameter must be a number between Min_Data = 0 and Max_Data = 63 */
|
|
|
|
uint32_t PLLN; /*!< PLLN: Multiplication factor for PLL VCO output clock.
|
|
This parameter must be a number between Min_Data = 50 and Max_Data = 432
|
|
except for STM32F411xE devices where the Min_Data = 192 */
|
|
|
|
uint32_t PLLP; /*!< PLLP: Division factor for main system clock (SYSCLK).
|
|
This parameter must be a value of @ref RCC_PLLP_Clock_Divider */
|
|
|
|
uint32_t PLLQ; /*!< PLLQ: Division factor for OTG FS, SDIO and RNG clocks.
|
|
This parameter must be a number between Min_Data = 4 and Max_Data = 15 */
|
|
#if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) || defined(STM32F446xx) || defined(STM32F469xx) ||\
|
|
defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx)
|
|
uint32_t PLLR; /*!< PLLR: PLL division factor for I2S, SAI, SYSTEM, SPDIFRX clocks.
|
|
This parameter is only available in STM32F410xx/STM32F446xx/STM32F469xx/STM32F479xx
|
|
and STM32F412Zx/STM32F412Vx/STM32F412Rx/STM32F412Cx devices.
|
|
This parameter must be a number between Min_Data = 2 and Max_Data = 7 */
|
|
#endif /* STM32F410xx || STM32F446xx || STM32F469xx || STM32F479xx || STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx */
|
|
}RCC_PLLInitTypeDef;
|
|
|
|
#if defined(STM32F446xx)
|
|
/**
|
|
* @brief PLLI2S Clock structure definition
|
|
*/
|
|
typedef struct
|
|
{
|
|
uint32_t PLLI2SM; /*!< Specifies division factor for PLL VCO input clock.
|
|
This parameter must be a number between Min_Data = 2 and Max_Data = 63 */
|
|
|
|
uint32_t PLLI2SN; /*!< Specifies the multiplication factor for PLLI2S VCO output clock.
|
|
This parameter must be a number between Min_Data = 50 and Max_Data = 432 */
|
|
|
|
uint32_t PLLI2SP; /*!< Specifies division factor for SPDIFRX Clock.
|
|
This parameter must be a value of @ref RCCEx_PLLI2SP_Clock_Divider */
|
|
|
|
uint32_t PLLI2SQ; /*!< Specifies the division factor for SAI clock.
|
|
This parameter must be a number between Min_Data = 2 and Max_Data = 15.
|
|
This parameter will be used only when PLLI2S is selected as Clock Source SAI */
|
|
|
|
uint32_t PLLI2SR; /*!< Specifies the division factor for I2S clock.
|
|
This parameter must be a number between Min_Data = 2 and Max_Data = 7.
|
|
This parameter will be used only when PLLI2S is selected as Clock Source I2S */
|
|
}RCC_PLLI2SInitTypeDef;
|
|
|
|
/**
|
|
* @brief PLLSAI Clock structure definition
|
|
*/
|
|
typedef struct
|
|
{
|
|
uint32_t PLLSAIM; /*!< Spcifies division factor for PLL VCO input clock.
|
|
This parameter must be a number between Min_Data = 2 and Max_Data = 63 */
|
|
|
|
uint32_t PLLSAIN; /*!< Specifies the multiplication factor for PLLI2S VCO output clock.
|
|
This parameter must be a number between Min_Data = 50 and Max_Data = 432 */
|
|
|
|
uint32_t PLLSAIP; /*!< Specifies division factor for OTG FS, SDIO and RNG clocks.
|
|
This parameter must be a value of @ref RCCEx_PLLSAIP_Clock_Divider */
|
|
|
|
uint32_t PLLSAIQ; /*!< Specifies the division factor for SAI clock.
|
|
This parameter must be a number between Min_Data = 2 and Max_Data = 15.
|
|
This parameter will be used only when PLLSAI is selected as Clock Source SAI */
|
|
}RCC_PLLSAIInitTypeDef;
|
|
|
|
/**
|
|
* @brief RCC extended clocks structure definition
|
|
*/
|
|
typedef struct
|
|
{
|
|
uint32_t PeriphClockSelection; /*!< The Extended Clock to be configured.
|
|
This parameter can be a value of @ref RCCEx_Periph_Clock_Selection */
|
|
|
|
RCC_PLLI2SInitTypeDef PLLI2S; /*!< PLL I2S structure parameters.
|
|
This parameter will be used only when PLLI2S is selected as Clock Source I2S or SAI */
|
|
|
|
RCC_PLLSAIInitTypeDef PLLSAI; /*!< PLL SAI structure parameters.
|
|
This parameter will be used only when PLLI2S is selected as Clock Source SAI or LTDC */
|
|
|
|
uint32_t PLLI2SDivQ; /*!< Specifies the PLLI2S division factor for SAI1 clock.
|
|
This parameter must be a number between Min_Data = 1 and Max_Data = 32
|
|
This parameter will be used only when PLLI2S is selected as Clock Source SAI */
|
|
|
|
uint32_t PLLSAIDivQ; /*!< Specifies the PLLI2S division factor for SAI1 clock.
|
|
This parameter must be a number between Min_Data = 1 and Max_Data = 32
|
|
This parameter will be used only when PLLSAI is selected as Clock Source SAI */
|
|
|
|
uint32_t Sai1ClockSelection; /*!< Specifies SAI1 Clock Source Selection.
|
|
This parameter can be a value of @ref RCCEx_SAI1_Clock_Source */
|
|
|
|
uint32_t Sai2ClockSelection; /*!< Specifies SAI2 Clock Source Selection.
|
|
This parameter can be a value of @ref RCCEx_SAI2_Clock_Source */
|
|
|
|
uint32_t I2sApb1ClockSelection; /*!< Specifies I2S APB1 Clock Source Selection.
|
|
This parameter can be a value of @ref RCCEx_I2SAPB1_Clock_Source */
|
|
|
|
uint32_t I2sApb2ClockSelection; /*!< Specifies I2S APB2 Clock Source Selection.
|
|
This parameter can be a value of @ref RCCEx_I2SAPB2_Clock_Source */
|
|
|
|
uint32_t RTCClockSelection; /*!< Specifies RTC Clock Source Selection.
|
|
This parameter can be a value of @ref RCC_RTC_Clock_Source */
|
|
|
|
uint32_t SdioClockSelection; /*!< Specifies SDIO Clock Source Selection.
|
|
This parameter can be a value of @ref RCCEx_SDIO_Clock_Source */
|
|
|
|
uint32_t CecClockSelection; /*!< Specifies CEC Clock Source Selection.
|
|
This parameter can be a value of @ref RCCEx_CEC_Clock_Source */
|
|
|
|
uint32_t Fmpi2c1ClockSelection; /*!< Specifies FMPI2C1 Clock Source Selection.
|
|
This parameter can be a value of @ref RCCEx_FMPI2C1_Clock_Source */
|
|
|
|
uint32_t SpdifClockSelection; /*!< Specifies SPDIFRX Clock Source Selection.
|
|
This parameter can be a value of @ref RCCEx_SPDIFRX_Clock_Source */
|
|
|
|
uint32_t Clk48ClockSelection; /*!< Specifies CLK48 Clock Selection this clock used OTG FS, SDIO and RNG clocks.
|
|
This parameter can be a value of @ref RCCEx_CLK48_Clock_Source */
|
|
|
|
uint8_t TIMPresSelection; /*!< Specifies TIM Clock Source Selection.
|
|
This parameter can be a value of @ref RCCEx_TIM_PRescaler_Selection */
|
|
}RCC_PeriphCLKInitTypeDef;
|
|
#endif /* STM32F446xx */
|
|
|
|
#if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx)
|
|
/**
|
|
* @brief RCC extended clocks structure definition
|
|
*/
|
|
typedef struct
|
|
{
|
|
uint32_t PeriphClockSelection; /*!< The Extended Clock to be configured.
|
|
This parameter can be a value of @ref RCCEx_Periph_Clock_Selection */
|
|
|
|
uint32_t I2SClockSelection; /*!< Specifies RTC Clock Source Selection.
|
|
This parameter can be a value of @ref RCCEx_I2S_APB_Clock_Source */
|
|
|
|
uint32_t RTCClockSelection; /*!< Specifies RTC Clock Source Selection.
|
|
This parameter can be a value of @ref RCC_RTC_Clock_Source */
|
|
|
|
uint32_t Lptim1ClockSelection; /*!< Specifies LPTIM1 Clock Source Selection.
|
|
This parameter can be a value of @ref RCCEx_LPTIM1_Clock_Source */
|
|
|
|
uint32_t Fmpi2c1ClockSelection; /*!< Specifies FMPI2C1 Clock Source Selection.
|
|
This parameter can be a value of @ref RCCEx_FMPI2C1_Clock_Source */
|
|
|
|
uint8_t TIMPresSelection; /*!< Specifies TIM Clock Source Selection.
|
|
This parameter can be a value of @ref RCCEx_TIM_PRescaler_Selection */
|
|
}RCC_PeriphCLKInitTypeDef;
|
|
#endif /* STM32F410Tx || STM32F410Cx || STM32F410Rx */
|
|
|
|
#if defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx)
|
|
/**
|
|
* @brief PLLI2S Clock structure definition
|
|
*/
|
|
typedef struct
|
|
{
|
|
uint32_t PLLI2SM; /*!< Specifies division factor for PLL VCO input clock.
|
|
This parameter must be a number between Min_Data = 2 and Max_Data = 63 */
|
|
|
|
uint32_t PLLI2SN; /*!< Specifies the multiplication factor for PLLI2S VCO output clock.
|
|
This parameter must be a number between Min_Data = 50 and Max_Data = 432 */
|
|
|
|
uint32_t PLLI2SQ; /*!< Specifies the division factor for SAI clock.
|
|
This parameter must be a number between Min_Data = 2 and Max_Data = 15.
|
|
This parameter will be used only when PLLI2S is selected as Clock Source SAI */
|
|
|
|
uint32_t PLLI2SR; /*!< Specifies the division factor for I2S clock.
|
|
This parameter must be a number between Min_Data = 2 and Max_Data = 7.
|
|
This parameter will be used only when PLLI2S is selected as Clock Source I2S */
|
|
}RCC_PLLI2SInitTypeDef;
|
|
|
|
/**
|
|
* @brief RCC extended clocks structure definition
|
|
*/
|
|
typedef struct
|
|
{
|
|
uint32_t PeriphClockSelection; /*!< The Extended Clock to be configured.
|
|
This parameter can be a value of @ref RCCEx_Periph_Clock_Selection */
|
|
|
|
RCC_PLLI2SInitTypeDef PLLI2S; /*!< PLL I2S structure parameters.
|
|
This parameter will be used only when PLLI2S is selected as Clock Source I2S */
|
|
|
|
uint32_t I2sApb1ClockSelection; /*!< Specifies I2S APB1 Clock Source Selection.
|
|
This parameter can be a value of @ref RCCEx_I2SAPB1_Clock_Source */
|
|
|
|
uint32_t I2sApb2ClockSelection; /*!< Specifies I2S APB2 Clock Source Selection.
|
|
This parameter can be a value of @ref RCCEx_I2SAPB2_Clock_Source */
|
|
|
|
uint32_t RTCClockSelection; /*!< Specifies RTC Clock Source Selection.
|
|
This parameter can be a value of @ref RCC_RTC_Clock_Source */
|
|
|
|
uint32_t SdioClockSelection; /*!< Specifies SDIO Clock Source Selection.
|
|
This parameter can be a value of @ref RCCEx_SDIO_Clock_Source */
|
|
|
|
uint32_t Fmpi2c1ClockSelection; /*!< Specifies FMPI2C1 Clock Source Selection.
|
|
This parameter can be a value of @ref RCCEx_FMPI2C1_Clock_Source */
|
|
|
|
uint32_t Clk48ClockSelection; /*!< Specifies CLK48 Clock Selection this clock used OTG FS, SDIO and RNG clocks.
|
|
This parameter can be a value of @ref RCCEx_CLK48_Clock_Source */
|
|
|
|
uint32_t Dfsdm1ClockSelection; /*!< Specifies DFSDM1 Clock Selection.
|
|
This parameter can be a value of @ref RCCEx_DFSDM1_Kernel_Clock_Source */
|
|
|
|
uint32_t Dfsdm1AudioClockSelection;/*!< Specifies DFSDM1 Audio Clock Selection.
|
|
This parameter can be a value of @ref RCCEx_DFSDM1_Audio_Clock_Source */
|
|
|
|
uint32_t PLLI2SSelection; /*!< Specifies PLL I2S Clock Source Selection.
|
|
This parameter can be a value of @ref RCCEx_PLL_I2S_Clock_Source */
|
|
|
|
uint8_t TIMPresSelection; /*!< Specifies TIM Clock Source Selection.
|
|
This parameter can be a value of @ref RCCEx_TIM_PRescaler_Selection */
|
|
}RCC_PeriphCLKInitTypeDef;
|
|
#endif /* STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx */
|
|
|
|
#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F469xx) || defined(STM32F479xx)
|
|
|
|
/**
|
|
* @brief PLLI2S Clock structure definition
|
|
*/
|
|
typedef struct
|
|
{
|
|
uint32_t PLLI2SN; /*!< Specifies the multiplication factor for PLLI2S VCO output clock.
|
|
This parameter must be a number between Min_Data = 50 and Max_Data = 432.
|
|
This parameter will be used only when PLLI2S is selected as Clock Source I2S or SAI */
|
|
|
|
uint32_t PLLI2SR; /*!< Specifies the division factor for I2S clock.
|
|
This parameter must be a number between Min_Data = 2 and Max_Data = 7.
|
|
This parameter will be used only when PLLI2S is selected as Clock Source I2S or SAI */
|
|
|
|
uint32_t PLLI2SQ; /*!< Specifies the division factor for SAI1 clock.
|
|
This parameter must be a number between Min_Data = 2 and Max_Data = 15.
|
|
This parameter will be used only when PLLI2S is selected as Clock Source SAI */
|
|
}RCC_PLLI2SInitTypeDef;
|
|
|
|
/**
|
|
* @brief PLLSAI Clock structure definition
|
|
*/
|
|
typedef struct
|
|
{
|
|
uint32_t PLLSAIN; /*!< Specifies the multiplication factor for PLLI2S VCO output clock.
|
|
This parameter must be a number between Min_Data = 50 and Max_Data = 432.
|
|
This parameter will be used only when PLLSAI is selected as Clock Source SAI or LTDC */
|
|
#if defined(STM32F469xx) || defined(STM32F479xx)
|
|
uint32_t PLLSAIP; /*!< Specifies division factor for OTG FS and SDIO clocks.
|
|
This parameter is only available in STM32F469xx/STM32F479xx devices.
|
|
This parameter must be a value of @ref RCCEx_PLLSAIP_Clock_Divider */
|
|
#endif /* STM32F469xx || STM32F479xx */
|
|
|
|
uint32_t PLLSAIQ; /*!< Specifies the division factor for SAI1 clock.
|
|
This parameter must be a number between Min_Data = 2 and Max_Data = 15.
|
|
This parameter will be used only when PLLSAI is selected as Clock Source SAI or LTDC */
|
|
|
|
uint32_t PLLSAIR; /*!< specifies the division factor for LTDC clock
|
|
This parameter must be a number between Min_Data = 2 and Max_Data = 7.
|
|
This parameter will be used only when PLLSAI is selected as Clock Source LTDC */
|
|
|
|
}RCC_PLLSAIInitTypeDef;
|
|
|
|
/**
|
|
* @brief RCC extended clocks structure definition
|
|
*/
|
|
typedef struct
|
|
{
|
|
uint32_t PeriphClockSelection; /*!< The Extended Clock to be configured.
|
|
This parameter can be a value of @ref RCCEx_Periph_Clock_Selection */
|
|
|
|
RCC_PLLI2SInitTypeDef PLLI2S; /*!< PLL I2S structure parameters.
|
|
This parameter will be used only when PLLI2S is selected as Clock Source I2S or SAI */
|
|
|
|
RCC_PLLSAIInitTypeDef PLLSAI; /*!< PLL SAI structure parameters.
|
|
This parameter will be used only when PLLI2S is selected as Clock Source SAI or LTDC */
|
|
|
|
uint32_t PLLI2SDivQ; /*!< Specifies the PLLI2S division factor for SAI1 clock.
|
|
This parameter must be a number between Min_Data = 1 and Max_Data = 32
|
|
This parameter will be used only when PLLI2S is selected as Clock Source SAI */
|
|
|
|
uint32_t PLLSAIDivQ; /*!< Specifies the PLLI2S division factor for SAI1 clock.
|
|
This parameter must be a number between Min_Data = 1 and Max_Data = 32
|
|
This parameter will be used only when PLLSAI is selected as Clock Source SAI */
|
|
|
|
uint32_t PLLSAIDivR; /*!< Specifies the PLLSAI division factor for LTDC clock.
|
|
This parameter must be one value of @ref RCCEx_PLLSAI_DIVR */
|
|
|
|
uint32_t RTCClockSelection; /*!< Specifies RTC Clock Prescalers Selection.
|
|
This parameter can be a value of @ref RCC_RTC_Clock_Source */
|
|
|
|
uint8_t TIMPresSelection; /*!< Specifies TIM Clock Prescalers Selection.
|
|
This parameter can be a value of @ref RCCEx_TIM_PRescaler_Selection */
|
|
#if defined(STM32F469xx) || defined(STM32F479xx)
|
|
uint32_t Clk48ClockSelection; /*!< Specifies CLK48 Clock Selection this clock used OTG FS, SDIO and RNG clocks.
|
|
This parameter can be a value of @ref RCCEx_CLK48_Clock_Source */
|
|
|
|
uint32_t SdioClockSelection; /*!< Specifies SDIO Clock Source Selection.
|
|
This parameter can be a value of @ref RCCEx_SDIO_Clock_Source */
|
|
#endif /* STM32F469xx || STM32F479xx */
|
|
}RCC_PeriphCLKInitTypeDef;
|
|
|
|
#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F469xx || STM32F479xx */
|
|
|
|
#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) ||\
|
|
defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE)
|
|
/**
|
|
* @brief PLLI2S Clock structure definition
|
|
*/
|
|
typedef struct
|
|
{
|
|
#if defined(STM32F411xE)
|
|
uint32_t PLLI2SM; /*!< PLLM: Division factor for PLLI2S VCO input clock.
|
|
This parameter must be a number between Min_Data = 2 and Max_Data = 62 */
|
|
#endif /* STM32F411xE */
|
|
|
|
uint32_t PLLI2SN; /*!< Specifies the multiplication factor for PLLI2S VCO output clock.
|
|
This parameter must be a number between Min_Data = 50 and Max_Data = 432
|
|
Except for STM32F411xE devices where the Min_Data = 192.
|
|
This parameter will be used only when PLLI2S is selected as Clock Source I2S or SAI */
|
|
|
|
uint32_t PLLI2SR; /*!< Specifies the division factor for I2S clock.
|
|
This parameter must be a number between Min_Data = 2 and Max_Data = 7.
|
|
This parameter will be used only when PLLI2S is selected as Clock Source I2S or SAI */
|
|
|
|
}RCC_PLLI2SInitTypeDef;
|
|
|
|
/**
|
|
* @brief RCC extended clocks structure definition
|
|
*/
|
|
typedef struct
|
|
{
|
|
uint32_t PeriphClockSelection; /*!< The Extended Clock to be configured.
|
|
This parameter can be a value of @ref RCCEx_Periph_Clock_Selection */
|
|
|
|
RCC_PLLI2SInitTypeDef PLLI2S; /*!< PLL I2S structure parameters.
|
|
This parameter will be used only when PLLI2S is selected as Clock Source I2S or SAI */
|
|
|
|
uint32_t RTCClockSelection; /*!< Specifies RTC Clock Prescalers Selection.
|
|
This parameter can be a value of @ref RCC_RTC_Clock_Source */
|
|
#if defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE)
|
|
uint8_t TIMPresSelection; /*!< Specifies TIM Clock Source Selection.
|
|
This parameter can be a value of @ref RCCEx_TIM_PRescaler_Selection */
|
|
#endif /* STM32F401xC || STM32F401xE || STM32F411xE */
|
|
}RCC_PeriphCLKInitTypeDef;
|
|
#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F401xC || STM32F401xE || STM32F411xE */
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/* Exported constants --------------------------------------------------------*/
|
|
/** @defgroup RCCEx_Exported_Constants RCCEx Exported Constants
|
|
* @{
|
|
*/
|
|
|
|
/** @defgroup RCCEx_Periph_Clock_Selection RCC Periph Clock Selection
|
|
* @{
|
|
*/
|
|
/* Peripheral Clock source for STM32F412Zx/STM32F412Vx/STM32F412Rx/STM32F412Cx */
|
|
#if defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx)
|
|
#define RCC_PERIPHCLK_I2S_APB1 ((uint32_t)0x00000001U)
|
|
#define RCC_PERIPHCLK_I2S_APB2 ((uint32_t)0x00000002U)
|
|
#define RCC_PERIPHCLK_TIM ((uint32_t)0x00000004U)
|
|
#define RCC_PERIPHCLK_RTC ((uint32_t)0x00000008U)
|
|
#define RCC_PERIPHCLK_FMPI2C1 ((uint32_t)0x00000010U)
|
|
#define RCC_PERIPHCLK_CLK48 ((uint32_t)0x00000020U)
|
|
#define RCC_PERIPHCLK_SDIO ((uint32_t)0x00000040U)
|
|
#define RCC_PERIPHCLK_PLLI2S ((uint32_t)0x00000080U)
|
|
#define RCC_PERIPHCLK_DFSDM1 ((uint32_t)0x00000100U)
|
|
#define RCC_PERIPHCLK_DFSDM1_AUDIO ((uint32_t)0x00000200U)
|
|
#endif /* STM32F412Zx || STM32F412Vx) || STM32F412Rx || STM32F412Cx */
|
|
/*----------------------------------------------------------------------------*/
|
|
|
|
/*------------------- Peripheral Clock source for STM32F410xx ----------------*/
|
|
#if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx)
|
|
#define RCC_PERIPHCLK_I2S ((uint32_t)0x00000001U)
|
|
#define RCC_PERIPHCLK_TIM ((uint32_t)0x00000002U)
|
|
#define RCC_PERIPHCLK_RTC ((uint32_t)0x00000004U)
|
|
#define RCC_PERIPHCLK_FMPI2C1 ((uint32_t)0x00000008U)
|
|
#define RCC_PERIPHCLK_LPTIM1 ((uint32_t)0x00000010U)
|
|
#endif /* STM32F410Tx || STM32F410Cx || STM32F410Rx */
|
|
/*----------------------------------------------------------------------------*/
|
|
|
|
/*------------------- Peripheral Clock source for STM32F446xx ----------------*/
|
|
#if defined(STM32F446xx)
|
|
#define RCC_PERIPHCLK_I2S_APB1 ((uint32_t)0x00000001U)
|
|
#define RCC_PERIPHCLK_I2S_APB2 ((uint32_t)0x00000002U)
|
|
#define RCC_PERIPHCLK_SAI1 ((uint32_t)0x00000004U)
|
|
#define RCC_PERIPHCLK_SAI2 ((uint32_t)0x00000008U)
|
|
#define RCC_PERIPHCLK_TIM ((uint32_t)0x00000010U)
|
|
#define RCC_PERIPHCLK_RTC ((uint32_t)0x00000020U)
|
|
#define RCC_PERIPHCLK_CEC ((uint32_t)0x00000040U)
|
|
#define RCC_PERIPHCLK_FMPI2C1 ((uint32_t)0x00000080U)
|
|
#define RCC_PERIPHCLK_CLK48 ((uint32_t)0x00000100U)
|
|
#define RCC_PERIPHCLK_SDIO ((uint32_t)0x00000200U)
|
|
#define RCC_PERIPHCLK_SPDIFRX ((uint32_t)0x00000400U)
|
|
#define RCC_PERIPHCLK_PLLI2S ((uint32_t)0x00000800U)
|
|
#endif /* STM32F446xx */
|
|
/*-----------------------------------------------------------------------------*/
|
|
|
|
/*----------- Peripheral Clock source for STM32F469xx/STM32F479xx -------------*/
|
|
#if defined(STM32F469xx) || defined(STM32F479xx)
|
|
#define RCC_PERIPHCLK_I2S ((uint32_t)0x00000001U)
|
|
#define RCC_PERIPHCLK_SAI_PLLI2S ((uint32_t)0x00000002U)
|
|
#define RCC_PERIPHCLK_SAI_PLLSAI ((uint32_t)0x00000004U)
|
|
#define RCC_PERIPHCLK_LTDC ((uint32_t)0x00000008U)
|
|
#define RCC_PERIPHCLK_TIM ((uint32_t)0x00000010U)
|
|
#define RCC_PERIPHCLK_RTC ((uint32_t)0x00000020U)
|
|
#define RCC_PERIPHCLK_PLLI2S ((uint32_t)0x00000040U)
|
|
#define RCC_PERIPHCLK_CLK48 ((uint32_t)0x00000080U)
|
|
#define RCC_PERIPHCLK_SDIO ((uint32_t)0x00000100U)
|
|
#endif /* STM32F469xx || STM32F479xx */
|
|
/*----------------------------------------------------------------------------*/
|
|
|
|
/*-------- Peripheral Clock source for STM32F42xxx/STM32F43xxx ---------------*/
|
|
#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)
|
|
#define RCC_PERIPHCLK_I2S ((uint32_t)0x00000001U)
|
|
#define RCC_PERIPHCLK_SAI_PLLI2S ((uint32_t)0x00000002U)
|
|
#define RCC_PERIPHCLK_SAI_PLLSAI ((uint32_t)0x00000004U)
|
|
#define RCC_PERIPHCLK_LTDC ((uint32_t)0x00000008U)
|
|
#define RCC_PERIPHCLK_TIM ((uint32_t)0x00000010U)
|
|
#define RCC_PERIPHCLK_RTC ((uint32_t)0x00000020U)
|
|
#define RCC_PERIPHCLK_PLLI2S ((uint32_t)0x00000040U)
|
|
#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */
|
|
/*----------------------------------------------------------------------------*/
|
|
|
|
/*-------- Peripheral Clock source for STM32F40xxx/STM32F41xxx ---------------*/
|
|
#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx)|| defined(STM32F417xx) ||\
|
|
defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE)
|
|
#define RCC_PERIPHCLK_I2S ((uint32_t)0x00000001U)
|
|
#define RCC_PERIPHCLK_RTC ((uint32_t)0x00000002U)
|
|
#define RCC_PERIPHCLK_PLLI2S ((uint32_t)0x00000004U)
|
|
#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F401xC || STM32F401xE || STM32F411xE */
|
|
#if defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE)
|
|
#define RCC_PERIPHCLK_TIM ((uint32_t)0x00000008U)
|
|
#endif /* STM32F401xC || STM32F401xE || STM32F411xE */
|
|
/*----------------------------------------------------------------------------*/
|
|
/**
|
|
* @}
|
|
*/
|
|
#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) || \
|
|
defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || \
|
|
defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE) || defined(STM32F446xx) || \
|
|
defined(STM32F469xx) || defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || \
|
|
defined(STM32F412Rx) || defined(STM32F412Cx)
|
|
/** @defgroup RCCEx_I2S_Clock_Source I2S Clock Source
|
|
* @{
|
|
*/
|
|
#define RCC_I2SCLKSOURCE_PLLI2S ((uint32_t)0x00000000U)
|
|
#define RCC_I2SCLKSOURCE_EXT ((uint32_t)0x00000001U)
|
|
/**
|
|
* @}
|
|
*/
|
|
#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx ||
|
|
STM32F401xC || STM32F401xE || STM32F411xE || STM32F446xx || STM32F469xx || STM32F479xx || STM32F412Zx || STM32F412Vx ||
|
|
STM32F412Rx || STM32F412Cx */
|
|
|
|
/** @defgroup RCCEx_PLLSAI_DIVR RCC PLLSAI DIVR
|
|
* @{
|
|
*/
|
|
#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F446xx) ||\
|
|
defined(STM32F469xx) || defined(STM32F479xx)
|
|
#define RCC_PLLSAIDIVR_2 ((uint32_t)0x00000000U)
|
|
#define RCC_PLLSAIDIVR_4 ((uint32_t)0x00010000U)
|
|
#define RCC_PLLSAIDIVR_8 ((uint32_t)0x00020000U)
|
|
#define RCC_PLLSAIDIVR_16 ((uint32_t)0x00030000U)
|
|
#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx || STM32F469xx || STM32F479xx */
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RCCEx_PLLI2SP_Clock_Divider RCC PLLI2SP Clock Divider
|
|
* @{
|
|
*/
|
|
#if defined(STM32F446xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || \
|
|
defined(STM32F412Rx) || defined(STM32F412Cx)
|
|
#define RCC_PLLI2SP_DIV2 ((uint32_t)0x00000002U)
|
|
#define RCC_PLLI2SP_DIV4 ((uint32_t)0x00000004U)
|
|
#define RCC_PLLI2SP_DIV6 ((uint32_t)0x00000006U)
|
|
#define RCC_PLLI2SP_DIV8 ((uint32_t)0x00000008U)
|
|
#endif /* STM32F446xx || STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx */
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RCCEx_PLLSAIP_Clock_Divider RCC PLLSAIP Clock Divider
|
|
* @{
|
|
*/
|
|
#if defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx)
|
|
#define RCC_PLLSAIP_DIV2 ((uint32_t)0x00000002U)
|
|
#define RCC_PLLSAIP_DIV4 ((uint32_t)0x00000004U)
|
|
#define RCC_PLLSAIP_DIV6 ((uint32_t)0x00000006U)
|
|
#define RCC_PLLSAIP_DIV8 ((uint32_t)0x00000008U)
|
|
#endif /* STM32F446xx || STM32F469xx || STM32F479xx */
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F469xx) || defined(STM32F479xx)
|
|
/** @defgroup RCCEx_SAI_BlockA_Clock_Source RCC SAI BlockA Clock Source
|
|
* @{
|
|
*/
|
|
#define RCC_SAIACLKSOURCE_PLLSAI ((uint32_t)0x00000000U)
|
|
#define RCC_SAIACLKSOURCE_PLLI2S ((uint32_t)0x00100000U)
|
|
#define RCC_SAIACLKSOURCE_EXT ((uint32_t)0x00200000U)
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RCCEx_SAI_BlockB_Clock_Source RCC SAI BlockB Clock Source
|
|
* @{
|
|
*/
|
|
#define RCC_SAIBCLKSOURCE_PLLSAI ((uint32_t)0x00000000U)
|
|
#define RCC_SAIBCLKSOURCE_PLLI2S ((uint32_t)0x00400000U)
|
|
#define RCC_SAIBCLKSOURCE_EXT ((uint32_t)0x00800000U)
|
|
/**
|
|
* @}
|
|
*/
|
|
#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F469xx || STM32F479xx */
|
|
|
|
#if defined(STM32F469xx) || defined(STM32F479xx)
|
|
/** @defgroup RCCEx_CLK48_Clock_Source RCC CLK48 Clock Source
|
|
* @{
|
|
*/
|
|
#define RCC_CLK48CLKSOURCE_PLLQ ((uint32_t)0x00000000U)
|
|
#define RCC_CLK48CLKSOURCE_PLLSAIP ((uint32_t)RCC_DCKCFGR_CK48MSEL)
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RCCEx_SDIO_Clock_Source RCC SDIO Clock Source
|
|
* @{
|
|
*/
|
|
#define RCC_SDIOCLKSOURCE_CLK48 ((uint32_t)0x00000000U)
|
|
#define RCC_SDIOCLKSOURCE_SYSCLK ((uint32_t)RCC_DCKCFGR_SDIOSEL)
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RCCEx_DSI_Clock_Source RCC DSI Clock Source
|
|
* @{
|
|
*/
|
|
#define RCC_DSICLKSOURCE_DSIPHY ((uint32_t)0x00000000U)
|
|
#define RCC_DSICLKSOURCE_PLLR ((uint32_t)RCC_DCKCFGR_DSISEL)
|
|
/**
|
|
* @}
|
|
*/
|
|
#endif /* STM32F469xx || STM32F479xx */
|
|
|
|
#if defined(STM32F446xx)
|
|
/** @defgroup RCCEx_SAI1_Clock_Source RCC SAI1 Clock Source
|
|
* @{
|
|
*/
|
|
#define RCC_SAI1CLKSOURCE_PLLSAI ((uint32_t)0x00000000U)
|
|
#define RCC_SAI1CLKSOURCE_PLLI2S ((uint32_t)RCC_DCKCFGR_SAI1SRC_0)
|
|
#define RCC_SAI1CLKSOURCE_PLLR ((uint32_t)RCC_DCKCFGR_SAI1SRC_1)
|
|
#define RCC_SAI1CLKSOURCE_EXT ((uint32_t)RCC_DCKCFGR_SAI1SRC)
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RCCEx_SAI2_Clock_Source RCC SAI2 Clock Source
|
|
* @{
|
|
*/
|
|
#define RCC_SAI2CLKSOURCE_PLLSAI ((uint32_t)0x00000000U)
|
|
#define RCC_SAI2CLKSOURCE_PLLI2S ((uint32_t)RCC_DCKCFGR_SAI2SRC_0)
|
|
#define RCC_SAI2CLKSOURCE_PLLR ((uint32_t)RCC_DCKCFGR_SAI2SRC_1)
|
|
#define RCC_SAI2CLKSOURCE_PLLSRC ((uint32_t)RCC_DCKCFGR_SAI2SRC)
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RCCEx_I2SAPB1_Clock_Source RCC I2S APB1 Clock Source
|
|
* @{
|
|
*/
|
|
#define RCC_I2SAPB1CLKSOURCE_PLLI2S ((uint32_t)0x00000000U)
|
|
#define RCC_I2SAPB1CLKSOURCE_EXT ((uint32_t)RCC_DCKCFGR_I2S1SRC_0)
|
|
#define RCC_I2SAPB1CLKSOURCE_PLLR ((uint32_t)RCC_DCKCFGR_I2S1SRC_1)
|
|
#define RCC_I2SAPB1CLKSOURCE_PLLSRC ((uint32_t)RCC_DCKCFGR_I2S1SRC)
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RCCEx_I2SAPB2_Clock_Source RCC I2S APB2 Clock Source
|
|
* @{
|
|
*/
|
|
#define RCC_I2SAPB2CLKSOURCE_PLLI2S ((uint32_t)0x00000000U)
|
|
#define RCC_I2SAPB2CLKSOURCE_EXT ((uint32_t)RCC_DCKCFGR_I2S2SRC_0)
|
|
#define RCC_I2SAPB2CLKSOURCE_PLLR ((uint32_t)RCC_DCKCFGR_I2S2SRC_1)
|
|
#define RCC_I2SAPB2CLKSOURCE_PLLSRC ((uint32_t)RCC_DCKCFGR_I2S2SRC)
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RCCEx_FMPI2C1_Clock_Source RCC FMPI2C1 Clock Source
|
|
* @{
|
|
*/
|
|
#define RCC_FMPI2C1CLKSOURCE_APB ((uint32_t)0x00000000U)
|
|
#define RCC_FMPI2C1CLKSOURCE_SYSCLK ((uint32_t)RCC_DCKCFGR2_FMPI2C1SEL_0)
|
|
#define RCC_FMPI2C1CLKSOURCE_HSI ((uint32_t)RCC_DCKCFGR2_FMPI2C1SEL_1)
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RCCEx_CEC_Clock_Source RCC CEC Clock Source
|
|
* @{
|
|
*/
|
|
#define RCC_CECCLKSOURCE_HSI ((uint32_t)0x00000000U)
|
|
#define RCC_CECCLKSOURCE_LSE ((uint32_t)RCC_DCKCFGR2_CECSEL)
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RCCEx_CLK48_Clock_Source RCC CLK48 Clock Source
|
|
* @{
|
|
*/
|
|
#define RCC_CLK48CLKSOURCE_PLLQ ((uint32_t)0x00000000U)
|
|
#define RCC_CLK48CLKSOURCE_PLLSAIP ((uint32_t)RCC_DCKCFGR2_CK48MSEL)
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RCCEx_SDIO_Clock_Source RCC SDIO Clock Source
|
|
* @{
|
|
*/
|
|
#define RCC_SDIOCLKSOURCE_CLK48 ((uint32_t)0x00000000U)
|
|
#define RCC_SDIOCLKSOURCE_SYSCLK ((uint32_t)RCC_DCKCFGR2_SDIOSEL)
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RCCEx_SPDIFRX_Clock_Source RCC SPDIFRX Clock Source
|
|
* @{
|
|
*/
|
|
#define RCC_SPDIFRXCLKSOURCE_PLLR ((uint32_t)0x00000000U)
|
|
#define RCC_SPDIFRXCLKSOURCE_PLLI2SP ((uint32_t)RCC_DCKCFGR2_SPDIFRXSEL)
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
#endif /* STM32F446xx */
|
|
|
|
#if defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx)
|
|
/** @defgroup RCCEx_PLL_I2S_Clock_Source PLL I2S Clock Source
|
|
* @{
|
|
*/
|
|
#define RCC_PLLI2SCLKSOURCE_PLLSRC ((uint32_t)0x00000000U)
|
|
#define RCC_PLLI2SCLKSOURCE_EXT ((uint32_t)RCC_PLLI2SCFGR_PLLI2SSRC)
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RCCEx_DFSDM1_Audio_Clock_Source RCC DFSDM1 Audio Clock Source
|
|
* @{
|
|
*/
|
|
#define RCC_DFSDM1AUDIOCLKSOURCE_I2SAPB1 ((uint32_t)0x00000000U)
|
|
#define RCC_DFSDM1AUDIOCLKSOURCE_I2SAPB2 ((uint32_t)RCC_DCKCFGR_CKDFSDM1ASEL)
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RCCEx_DFSDM1_Kernel_Clock_Source RCC DFSDM1 Kernel Clock Source
|
|
* @{
|
|
*/
|
|
#define RCC_DFSDM1CLKSOURCE_APB2 ((uint32_t)0x00000000U)
|
|
#define RCC_DFSDM1CLKSOURCE_SYSCLK ((uint32_t)RCC_DCKCFGR_CKDFSDM1SEL)
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RCCEx_I2SAPB1_Clock_Source RCC I2S APB1 Clock Source
|
|
* @{
|
|
*/
|
|
#define RCC_I2SAPB1CLKSOURCE_PLLI2S ((uint32_t)0x00000000U)
|
|
#define RCC_I2SAPB1CLKSOURCE_EXT ((uint32_t)RCC_DCKCFGR_I2S1SRC_0)
|
|
#define RCC_I2SAPB1CLKSOURCE_PLLR ((uint32_t)RCC_DCKCFGR_I2S1SRC_1)
|
|
#define RCC_I2SAPB1CLKSOURCE_PLLSRC ((uint32_t)RCC_DCKCFGR_I2S1SRC)
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RCCEx_I2SAPB2_Clock_Source RCC I2S APB2 Clock Source
|
|
* @{
|
|
*/
|
|
#define RCC_I2SAPB2CLKSOURCE_PLLI2S ((uint32_t)0x00000000U)
|
|
#define RCC_I2SAPB2CLKSOURCE_EXT ((uint32_t)RCC_DCKCFGR_I2S2SRC_0)
|
|
#define RCC_I2SAPB2CLKSOURCE_PLLR ((uint32_t)RCC_DCKCFGR_I2S2SRC_1)
|
|
#define RCC_I2SAPB2CLKSOURCE_PLLSRC ((uint32_t)RCC_DCKCFGR_I2S2SRC)
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RCCEx_FMPI2C1_Clock_Source RCC FMPI2C1 Clock Source
|
|
* @{
|
|
*/
|
|
#define RCC_FMPI2C1CLKSOURCE_APB ((uint32_t)0x00000000U)
|
|
#define RCC_FMPI2C1CLKSOURCE_SYSCLK ((uint32_t)RCC_DCKCFGR2_FMPI2C1SEL_0)
|
|
#define RCC_FMPI2C1CLKSOURCE_HSI ((uint32_t)RCC_DCKCFGR2_FMPI2C1SEL_1)
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RCCEx_CLK48_Clock_Source RCC CLK48 Clock Source
|
|
* @{
|
|
*/
|
|
#define RCC_CLK48CLKSOURCE_PLLQ ((uint32_t)0x00000000U)
|
|
#define RCC_CLK48CLKSOURCE_PLLI2SQ ((uint32_t)RCC_DCKCFGR2_CK48MSEL)
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RCCEx_SDIO_Clock_Source RCC SDIO Clock Source
|
|
* @{
|
|
*/
|
|
#define RCC_SDIOCLKSOURCE_CLK48 ((uint32_t)0x00000000U)
|
|
#define RCC_SDIOCLKSOURCE_SYSCLK ((uint32_t)RCC_DCKCFGR2_SDIOSEL)
|
|
/**
|
|
* @}
|
|
*/
|
|
#endif /* STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx */
|
|
|
|
#if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx)
|
|
|
|
/** @defgroup RCCEx_I2S_APB_Clock_Source RCC I2S APB Clock Source
|
|
* @{
|
|
*/
|
|
#define RCC_I2SAPBCLKSOURCE_PLLR ((uint32_t)0x00000000U)
|
|
#define RCC_I2SAPBCLKSOURCE_EXT ((uint32_t)RCC_DCKCFGR_I2SSRC_0)
|
|
#define RCC_I2SAPBCLKSOURCE_PLLSRC ((uint32_t)RCC_DCKCFGR_I2SSRC_1)
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RCCEx_FMPI2C1_Clock_Source RCC FMPI2C1 Clock Source
|
|
* @{
|
|
*/
|
|
#define RCC_FMPI2C1CLKSOURCE_APB ((uint32_t)0x00000000U)
|
|
#define RCC_FMPI2C1CLKSOURCE_SYSCLK ((uint32_t)RCC_DCKCFGR2_FMPI2C1SEL_0)
|
|
#define RCC_FMPI2C1CLKSOURCE_HSI ((uint32_t)RCC_DCKCFGR2_FMPI2C1SEL_1)
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RCCEx_LPTIM1_Clock_Source RCC LPTIM1 Clock Source
|
|
* @{
|
|
*/
|
|
#define RCC_LPTIM1CLKSOURCE_PCLK ((uint32_t)0x00000000U)
|
|
#define RCC_LPTIM1CLKSOURCE_HSI ((uint32_t)RCC_DCKCFGR2_LPTIM1SEL_0)
|
|
#define RCC_LPTIM1CLKSOURCE_LSI ((uint32_t)RCC_DCKCFGR2_LPTIM1SEL_1)
|
|
#define RCC_LPTIM1CLKSOURCE_LSE ((uint32_t)RCC_DCKCFGR2_LPTIM1SEL_0 | RCC_DCKCFGR2_LPTIM1SEL_1)
|
|
/**
|
|
* @}
|
|
*/
|
|
#endif /* STM32F410Tx || STM32F410Cx || STM32F410Rx */
|
|
|
|
#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\
|
|
defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F410Tx) || defined(STM32F410Cx) ||\
|
|
defined(STM32F410Rx) || defined(STM32F411xE) || defined(STM32F446xx) || defined(STM32F469xx) ||\
|
|
defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) ||\
|
|
defined(STM32F412Cx)
|
|
/** @defgroup RCCEx_TIM_PRescaler_Selection RCC TIM PRescaler Selection
|
|
* @{
|
|
*/
|
|
#define RCC_TIMPRES_DESACTIVATED ((uint8_t)0x00U)
|
|
#define RCC_TIMPRES_ACTIVATED ((uint8_t)0x01U)
|
|
/**
|
|
* @}
|
|
*/
|
|
#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F401xC || STM32F401xE ||\
|
|
STM32F410xx || STM32F411xE || STM32F446xx || STM32F469xx || STM32F479xx || STM32F412Zx ||\
|
|
STM32F412Vx || STM32F412Rx || STM32F412Cx */
|
|
|
|
#if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) || defined(STM32F411xE) ||\
|
|
defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx) || defined(STM32F412Zx) ||\
|
|
defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx)
|
|
/** @defgroup RCCEx_LSE_Dual_Mode_Selection RCC LSE Dual Mode Selection
|
|
* @{
|
|
*/
|
|
#define RCC_LSE_LOWPOWER_MODE ((uint8_t)0x00U)
|
|
#define RCC_LSE_HIGHDRIVE_MODE ((uint8_t)0x01U)
|
|
/**
|
|
* @}
|
|
*/
|
|
#endif /* STM32F410xx || STM32F411xE || STM32F446xx || STM32F469xx || STM32F479xx || STM32F412Zx || STM32F412Vx ||\
|
|
STM32F412Rx || STM32F412Cx */
|
|
|
|
#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) || \
|
|
defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || \
|
|
defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE) || defined(STM32F446xx) || \
|
|
defined(STM32F469xx) || defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || \
|
|
defined(STM32F412Rx)
|
|
/** @defgroup RCC_MCO2_Clock_Source MCO2 Clock Source
|
|
* @{
|
|
*/
|
|
#define RCC_MCO2SOURCE_SYSCLK ((uint32_t)0x00000000U)
|
|
#define RCC_MCO2SOURCE_PLLI2SCLK RCC_CFGR_MCO2_0
|
|
#define RCC_MCO2SOURCE_HSE RCC_CFGR_MCO2_1
|
|
#define RCC_MCO2SOURCE_PLLCLK RCC_CFGR_MCO2
|
|
/**
|
|
* @}
|
|
*/
|
|
#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx ||
|
|
STM32F401xC || STM32F401xE || STM32F411xE || STM32F446xx || STM32F469xx || STM32F479xx || STM32F412Zx || STM32F412Vx ||
|
|
STM32F412Rx */
|
|
|
|
#if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx)
|
|
/** @defgroup RCC_MCO2_Clock_Source MCO2 Clock Source
|
|
* @{
|
|
*/
|
|
#define RCC_MCO2SOURCE_SYSCLK ((uint32_t)0x00000000U)
|
|
#define RCC_MCO2SOURCE_I2SCLK RCC_CFGR_MCO2_0
|
|
#define RCC_MCO2SOURCE_HSE RCC_CFGR_MCO2_1
|
|
#define RCC_MCO2SOURCE_PLLCLK RCC_CFGR_MCO2
|
|
/**
|
|
* @}
|
|
*/
|
|
#endif /* STM32F410Tx || STM32F410Cx || STM32F410Rx */
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/* Exported macro ------------------------------------------------------------*/
|
|
/** @defgroup RCCEx_Exported_Macros RCCEx Exported Macros
|
|
* @{
|
|
*/
|
|
/*------------------- STM32F42xxx/STM32F43xxx/STM32F469xx/STM32F479xx --------*/
|
|
#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx)|| defined(STM32F439xx) || defined(STM32F469xx) || defined(STM32F479xx)
|
|
/** @defgroup RCCEx_AHB1_Clock_Enable_Disable AHB1 Peripheral Clock Enable Disable
|
|
* @brief Enables or disables the AHB1 peripheral clock.
|
|
* @note After reset, the peripheral clock (used for registers read/write access)
|
|
* is disabled and the application software has to enable this clock before
|
|
* using it.
|
|
* @{
|
|
*/
|
|
#define __HAL_RCC_BKPSRAM_CLK_ENABLE() do { \
|
|
__IO uint32_t tmpreg = 0x00U; \
|
|
SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_BKPSRAMEN);\
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_BKPSRAMEN);\
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
#define __HAL_RCC_CCMDATARAMEN_CLK_ENABLE() do { \
|
|
__IO uint32_t tmpreg = 0x00U; \
|
|
SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_CCMDATARAMEN);\
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_CCMDATARAMEN);\
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
#define __HAL_RCC_CRC_CLK_ENABLE() do { \
|
|
__IO uint32_t tmpreg = 0x00U; \
|
|
SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_CRCEN);\
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_CRCEN);\
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
#define __HAL_RCC_GPIOD_CLK_ENABLE() do { \
|
|
__IO uint32_t tmpreg = 0x00U; \
|
|
SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIODEN);\
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIODEN);\
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
#define __HAL_RCC_GPIOE_CLK_ENABLE() do { \
|
|
__IO uint32_t tmpreg = 0x00U; \
|
|
SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOEEN);\
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOEEN);\
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
#define __HAL_RCC_GPIOI_CLK_ENABLE() do { \
|
|
__IO uint32_t tmpreg = 0x00U; \
|
|
SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOIEN);\
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOIEN);\
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
#define __HAL_RCC_GPIOF_CLK_ENABLE() do { \
|
|
__IO uint32_t tmpreg = 0x00U; \
|
|
SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOFEN);\
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOFEN);\
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
#define __HAL_RCC_GPIOG_CLK_ENABLE() do { \
|
|
__IO uint32_t tmpreg = 0x00U; \
|
|
SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOGEN);\
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOGEN);\
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
#define __HAL_RCC_GPIOJ_CLK_ENABLE() do { \
|
|
__IO uint32_t tmpreg = 0x00U; \
|
|
SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOJEN);\
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOJEN);\
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
#define __HAL_RCC_GPIOK_CLK_ENABLE() do { \
|
|
__IO uint32_t tmpreg = 0x00U; \
|
|
SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOKEN);\
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOKEN);\
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
#define __HAL_RCC_DMA2D_CLK_ENABLE() do { \
|
|
__IO uint32_t tmpreg = 0x00U; \
|
|
SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_DMA2DEN);\
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_DMA2DEN);\
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
#define __HAL_RCC_ETHMAC_CLK_ENABLE() do { \
|
|
__IO uint32_t tmpreg = 0x00U; \
|
|
SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_ETHMACEN);\
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_ETHMACEN);\
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
#define __HAL_RCC_ETHMACTX_CLK_ENABLE() do { \
|
|
__IO uint32_t tmpreg = 0x00U; \
|
|
SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_ETHMACTXEN);\
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_ETHMACTXEN);\
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
#define __HAL_RCC_ETHMACRX_CLK_ENABLE() do { \
|
|
__IO uint32_t tmpreg = 0x00U; \
|
|
SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_ETHMACRXEN);\
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_ETHMACRXEN);\
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
#define __HAL_RCC_ETHMACPTP_CLK_ENABLE() do { \
|
|
__IO uint32_t tmpreg = 0x00U; \
|
|
SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_ETHMACPTPEN);\
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_ETHMACPTPEN);\
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
#define __HAL_RCC_USB_OTG_HS_CLK_ENABLE() do { \
|
|
__IO uint32_t tmpreg = 0x00U; \
|
|
SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_OTGHSEN);\
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_OTGHSEN);\
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
#define __HAL_RCC_USB_OTG_HS_ULPI_CLK_ENABLE() do { \
|
|
__IO uint32_t tmpreg = 0x00U; \
|
|
SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_OTGHSULPIEN);\
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_OTGHSULPIEN);\
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
#define __HAL_RCC_GPIOD_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIODEN))
|
|
#define __HAL_RCC_GPIOE_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOEEN))
|
|
#define __HAL_RCC_GPIOF_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOFEN))
|
|
#define __HAL_RCC_GPIOG_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOGEN))
|
|
#define __HAL_RCC_GPIOI_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOIEN))
|
|
#define __HAL_RCC_GPIOJ_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOJEN))
|
|
#define __HAL_RCC_GPIOK_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOKEN))
|
|
#define __HAL_RCC_DMA2D_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_DMA2DEN))
|
|
#define __HAL_RCC_ETHMAC_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_ETHMACEN))
|
|
#define __HAL_RCC_ETHMACTX_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_ETHMACTXEN))
|
|
#define __HAL_RCC_ETHMACRX_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_ETHMACRXEN))
|
|
#define __HAL_RCC_ETHMACPTP_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_ETHMACPTPEN))
|
|
#define __HAL_RCC_USB_OTG_HS_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_OTGHSEN))
|
|
#define __HAL_RCC_USB_OTG_HS_ULPI_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_OTGHSULPIEN))
|
|
#define __HAL_RCC_BKPSRAM_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_BKPSRAMEN))
|
|
#define __HAL_RCC_CCMDATARAMEN_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_CCMDATARAMEN))
|
|
#define __HAL_RCC_CRC_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_CRCEN))
|
|
|
|
/**
|
|
* @brief Enable ETHERNET clock.
|
|
*/
|
|
#define __HAL_RCC_ETH_CLK_ENABLE() do { \
|
|
__HAL_RCC_ETHMAC_CLK_ENABLE(); \
|
|
__HAL_RCC_ETHMACTX_CLK_ENABLE(); \
|
|
__HAL_RCC_ETHMACRX_CLK_ENABLE(); \
|
|
} while(0)
|
|
/**
|
|
* @brief Disable ETHERNET clock.
|
|
*/
|
|
#define __HAL_RCC_ETH_CLK_DISABLE() do { \
|
|
__HAL_RCC_ETHMACTX_CLK_DISABLE(); \
|
|
__HAL_RCC_ETHMACRX_CLK_DISABLE(); \
|
|
__HAL_RCC_ETHMAC_CLK_DISABLE(); \
|
|
} while(0)
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RCCEx_AHB1_Peripheral_Clock_Enable_Disable_Status AHB1 Peripheral Clock Enable Disable Status
|
|
* @brief Get the enable or disable status of the AHB1 peripheral clock.
|
|
* @note After reset, the peripheral clock (used for registers read/write access)
|
|
* is disabled and the application software has to enable this clock before
|
|
* using it.
|
|
* @{
|
|
*/
|
|
#define __HAL_RCC_GPIOD_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIODEN)) != RESET)
|
|
#define __HAL_RCC_GPIOE_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOEEN)) != RESET)
|
|
#define __HAL_RCC_GPIOF_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOFEN)) != RESET)
|
|
#define __HAL_RCC_GPIOG_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOGEN)) != RESET)
|
|
#define __HAL_RCC_GPIOI_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOIEN)) != RESET)
|
|
#define __HAL_RCC_GPIOJ_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOJEN)) != RESET)
|
|
#define __HAL_RCC_GPIOK_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOKEN)) != RESET)
|
|
#define __HAL_RCC_DMA2D_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_DMA2DEN)) != RESET)
|
|
#define __HAL_RCC_ETHMAC_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_ETHMACEN)) != RESET)
|
|
#define __HAL_RCC_ETHMACTX_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_ETHMACTXEN)) != RESET)
|
|
#define __HAL_RCC_ETHMACRX_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_ETHMACRXEN)) != RESET)
|
|
#define __HAL_RCC_ETHMACPTP_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_ETHMACPTPEN)) != RESET)
|
|
#define __HAL_RCC_USB_OTG_HS_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_OTGHSEN)) != RESET)
|
|
#define __HAL_RCC_USB_OTG_HS_ULPI_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_OTGHSULPIEN)) != RESET)
|
|
#define __HAL_RCC_BKPSRAM_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_BKPSRAMEN)) != RESET)
|
|
#define __HAL_RCC_CCMDATARAMEN_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_CCMDATARAMEN)) != RESET)
|
|
#define __HAL_RCC_CRC_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_CRCEN)) != RESET)
|
|
#define __HAL_RCC_ETH_IS_CLK_ENABLED() (__HAL_RCC_ETHMAC_IS_CLK_ENABLED() && \
|
|
__HAL_RCC_ETHMACTX_IS_CLK_ENABLED() && \
|
|
__HAL_RCC_ETHMACRX_IS_CLK_ENABLED())
|
|
|
|
#define __HAL_RCC_GPIOD_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIODEN)) == RESET)
|
|
#define __HAL_RCC_GPIOE_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOEEN)) == RESET)
|
|
#define __HAL_RCC_GPIOF_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOFEN)) == RESET)
|
|
#define __HAL_RCC_GPIOG_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOGEN)) == RESET)
|
|
#define __HAL_RCC_GPIOI_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOIEN)) == RESET)
|
|
#define __HAL_RCC_GPIOJ_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOJEN)) == RESET)
|
|
#define __HAL_RCC_GPIOK_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOKEN)) == RESET)
|
|
#define __HAL_RCC_DMA2D_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_DMA2DEN)) == RESET)
|
|
#define __HAL_RCC_ETHMAC_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_ETHMACEN)) == RESET)
|
|
#define __HAL_RCC_ETHMACTX_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_ETHMACTXEN)) == RESET)
|
|
#define __HAL_RCC_ETHMACRX_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_ETHMACRXEN)) == RESET)
|
|
#define __HAL_RCC_ETHMACPTP_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_ETHMACPTPEN)) == RESET)
|
|
#define __HAL_RCC_USB_OTG_HS_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_OTGHSEN)) == RESET)
|
|
#define __HAL_RCC_USB_OTG_HS_ULPI_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_OTGHSULPIEN)) == RESET)
|
|
#define __HAL_RCC_BKPSRAM_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_BKPSRAMEN)) == RESET)
|
|
#define __HAL_RCC_CCMDATARAMEN_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_CCMDATARAMEN)) == RESET)
|
|
#define __HAL_RCC_CRC_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_CRCEN)) == RESET)
|
|
#define __HAL_RCC_ETH_IS_CLK_DISABLED() (__HAL_RCC_ETHMAC_IS_CLK_DISABLED() && \
|
|
__HAL_RCC_ETHMACTX_IS_CLK_DISABLED() && \
|
|
__HAL_RCC_ETHMACRX_IS_CLK_DISABLED())
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RCCEx_AHB2_Clock_Enable_Disable AHB2 Peripheral Clock Enable Disable
|
|
* @brief Enable or disable the AHB2 peripheral clock.
|
|
* @note After reset, the peripheral clock (used for registers read/write access)
|
|
* is disabled and the application software has to enable this clock before
|
|
* using it.
|
|
* @{
|
|
*/
|
|
#define __HAL_RCC_DCMI_CLK_ENABLE() do { \
|
|
__IO uint32_t tmpreg = 0x00U; \
|
|
SET_BIT(RCC->AHB2ENR, RCC_AHB2ENR_DCMIEN);\
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_DCMIEN);\
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
#define __HAL_RCC_DCMI_CLK_DISABLE() (RCC->AHB2ENR &= ~(RCC_AHB2ENR_DCMIEN))
|
|
|
|
#if defined(STM32F437xx)|| defined(STM32F439xx) || defined(STM32F479xx)
|
|
#define __HAL_RCC_CRYP_CLK_ENABLE() do { \
|
|
__IO uint32_t tmpreg = 0x00U; \
|
|
SET_BIT(RCC->AHB2ENR, RCC_AHB2ENR_CRYPEN);\
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_CRYPEN);\
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
#define __HAL_RCC_HASH_CLK_ENABLE() do { \
|
|
__IO uint32_t tmpreg = 0x00U; \
|
|
SET_BIT(RCC->AHB2ENR, RCC_AHB2ENR_HASHEN);\
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_HASHEN);\
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
|
|
#define __HAL_RCC_CRYP_CLK_DISABLE() (RCC->AHB2ENR &= ~(RCC_AHB2ENR_CRYPEN))
|
|
#define __HAL_RCC_HASH_CLK_DISABLE() (RCC->AHB2ENR &= ~(RCC_AHB2ENR_HASHEN))
|
|
#endif /* STM32F437xx || STM32F439xx || STM32F479xx */
|
|
|
|
#define __HAL_RCC_USB_OTG_FS_CLK_ENABLE() do {(RCC->AHB2ENR |= (RCC_AHB2ENR_OTGFSEN));\
|
|
__HAL_RCC_SYSCFG_CLK_ENABLE();\
|
|
}while(0)
|
|
|
|
#define __HAL_RCC_USB_OTG_FS_CLK_DISABLE() (RCC->AHB2ENR &= ~(RCC_AHB2ENR_OTGFSEN))
|
|
|
|
#define __HAL_RCC_RNG_CLK_ENABLE() do { \
|
|
__IO uint32_t tmpreg = 0x00U; \
|
|
SET_BIT(RCC->AHB2ENR, RCC_AHB2ENR_RNGEN);\
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_RNGEN);\
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
#define __HAL_RCC_RNG_CLK_DISABLE() (RCC->AHB2ENR &= ~(RCC_AHB2ENR_RNGEN))
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RCCEx_AHB2_Peripheral_Clock_Enable_Disable_Status AHB2 Peripheral Clock Enable Disable Status
|
|
* @brief Get the enable or disable status of the AHB1 peripheral clock.
|
|
* @note After reset, the peripheral clock (used for registers read/write access)
|
|
* is disabled and the application software has to enable this clock before
|
|
* using it.
|
|
* @{
|
|
*/
|
|
#define __HAL_RCC_DCMI_IS_CLK_ENABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_DCMIEN)) != RESET)
|
|
#define __HAL_RCC_DCMI_IS_CLK_DISABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_DCMIEN)) == RESET)
|
|
|
|
#if defined(STM32F437xx)|| defined(STM32F439xx) || defined(STM32F479xx)
|
|
#define __HAL_RCC_CRYP_IS_CLK_ENABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_CRYPEN)) != RESET)
|
|
#define __HAL_RCC_CRYP_IS_CLK_DISABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_CRYPEN)) == RESET)
|
|
|
|
#define __HAL_RCC_HASH_IS_CLK_ENABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_HASHEN)) != RESET)
|
|
#define __HAL_RCC_HASH_IS_CLK_DISABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_HASHEN)) == RESET)
|
|
#endif /* STM32F437xx || STM32F439xx || STM32F479xx */
|
|
|
|
#define __HAL_RCC_USB_OTG_FS_IS_CLK_ENABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_OTGFSEN)) != RESET)
|
|
#define __HAL_RCC_USB_OTG_FS_IS_CLK_DISABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_OTGFSEN)) == RESET)
|
|
|
|
#define __HAL_RCC_RNG_IS_CLK_ENABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_RNGEN)) != RESET)
|
|
#define __HAL_RCC_RNG_IS_CLK_DISABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_RNGEN)) == RESET)
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RCCEx_AHB3_Clock_Enable_Disable AHB3 Peripheral Clock Enable Disable
|
|
* @brief Enables or disables the AHB3 peripheral clock.
|
|
* @note After reset, the peripheral clock (used for registers read/write access)
|
|
* is disabled and the application software has to enable this clock before
|
|
* using it.
|
|
* @{
|
|
*/
|
|
#define __HAL_RCC_FMC_CLK_ENABLE() do { \
|
|
__IO uint32_t tmpreg = 0x00U; \
|
|
SET_BIT(RCC->AHB3ENR, RCC_AHB3ENR_FMCEN);\
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_FMCEN);\
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
#define __HAL_RCC_FMC_CLK_DISABLE() (RCC->AHB3ENR &= ~(RCC_AHB3ENR_FMCEN))
|
|
#if defined(STM32F469xx) || defined(STM32F479xx)
|
|
#define __HAL_RCC_QSPI_CLK_ENABLE() do { \
|
|
__IO uint32_t tmpreg = 0x00U; \
|
|
SET_BIT(RCC->AHB3ENR, RCC_AHB3ENR_QSPIEN);\
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_QSPIEN);\
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
#define __HAL_RCC_QSPI_CLK_DISABLE() (RCC->AHB3ENR &= ~(RCC_AHB3ENR_QSPIEN))
|
|
#endif /* STM32F469xx || STM32F479xx */
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
|
|
/** @defgroup RCCEx_AHB3_Peripheral_Clock_Enable_Disable_Status AHB3 Peripheral Clock Enable Disable Status
|
|
* @brief Get the enable or disable status of the AHB3 peripheral clock.
|
|
* @note After reset, the peripheral clock (used for registers read/write access)
|
|
* is disabled and the application software has to enable this clock before
|
|
* using it.
|
|
* @{
|
|
*/
|
|
#define __HAL_RCC_FMC_IS_CLK_ENABLED() ((RCC->AHB3ENR & (RCC_AHB3ENR_FMCEN)) != RESET)
|
|
#define __HAL_RCC_FMC_IS_CLK_DISABLED() ((RCC->AHB3ENR & (RCC_AHB3ENR_FMCEN)) == RESET)
|
|
#if defined(STM32F469xx) || defined(STM32F479xx)
|
|
#define __HAL_RCC_QSPI_IS_CLK_ENABLED() ((RCC->AHB3ENR & (RCC_AHB3ENR_QSPIEN)) != RESET)
|
|
#define __HAL_RCC_QSPI_IS_CLK_DISABLED() ((RCC->AHB3ENR & (RCC_AHB3ENR_QSPIEN)) == RESET)
|
|
#endif /* STM32F469xx || STM32F479xx */
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RCCEx_APB1_Clock_Enable_Disable APB1 Peripheral Clock Enable Disable
|
|
* @brief Enable or disable the Low Speed APB (APB1) peripheral clock.
|
|
* @note After reset, the peripheral clock (used for registers read/write access)
|
|
* is disabled and the application software has to enable this clock before
|
|
* using it.
|
|
* @{
|
|
*/
|
|
#define __HAL_RCC_TIM6_CLK_ENABLE() do { \
|
|
__IO uint32_t tmpreg = 0x00U; \
|
|
SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM6EN);\
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM6EN);\
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
#define __HAL_RCC_TIM7_CLK_ENABLE() do { \
|
|
__IO uint32_t tmpreg = 0x00U; \
|
|
SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM7EN);\
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM7EN);\
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
#define __HAL_RCC_TIM12_CLK_ENABLE() do { \
|
|
__IO uint32_t tmpreg = 0x00U; \
|
|
SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM12EN);\
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM12EN);\
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
#define __HAL_RCC_TIM13_CLK_ENABLE() do { \
|
|
__IO uint32_t tmpreg = 0x00U; \
|
|
SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM13EN);\
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM13EN);\
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
#define __HAL_RCC_TIM14_CLK_ENABLE() do { \
|
|
__IO uint32_t tmpreg = 0x00U; \
|
|
SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM14EN);\
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM14EN);\
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
#define __HAL_RCC_TIM14_CLK_ENABLE() do { \
|
|
__IO uint32_t tmpreg = 0x00U; \
|
|
SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM14EN);\
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM14EN);\
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
#define __HAL_RCC_USART3_CLK_ENABLE() do { \
|
|
__IO uint32_t tmpreg = 0x00U; \
|
|
SET_BIT(RCC->APB1ENR, RCC_APB1ENR_USART3EN);\
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_USART3EN);\
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
#define __HAL_RCC_UART4_CLK_ENABLE() do { \
|
|
__IO uint32_t tmpreg = 0x00U; \
|
|
SET_BIT(RCC->APB1ENR, RCC_APB1ENR_UART4EN);\
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_UART4EN);\
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
#define __HAL_RCC_UART5_CLK_ENABLE() do { \
|
|
__IO uint32_t tmpreg = 0x00U; \
|
|
SET_BIT(RCC->APB1ENR, RCC_APB1ENR_UART5EN);\
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_UART5EN);\
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
#define __HAL_RCC_CAN1_CLK_ENABLE() do { \
|
|
__IO uint32_t tmpreg = 0x00U; \
|
|
SET_BIT(RCC->APB1ENR, RCC_APB1ENR_CAN1EN);\
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_CAN1EN);\
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
#define __HAL_RCC_CAN2_CLK_ENABLE() do { \
|
|
__IO uint32_t tmpreg = 0x00U; \
|
|
SET_BIT(RCC->APB1ENR, RCC_APB1ENR_CAN2EN);\
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_CAN2EN);\
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
#define __HAL_RCC_DAC_CLK_ENABLE() do { \
|
|
__IO uint32_t tmpreg = 0x00U; \
|
|
SET_BIT(RCC->APB1ENR, RCC_APB1ENR_DACEN);\
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_DACEN);\
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
#define __HAL_RCC_UART7_CLK_ENABLE() do { \
|
|
__IO uint32_t tmpreg = 0x00U; \
|
|
SET_BIT(RCC->APB1ENR, RCC_APB1ENR_UART7EN);\
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_UART7EN);\
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
#define __HAL_RCC_UART8_CLK_ENABLE() do { \
|
|
__IO uint32_t tmpreg = 0x00U; \
|
|
SET_BIT(RCC->APB1ENR, RCC_APB1ENR_UART8EN);\
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_UART8EN);\
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
#define __HAL_RCC_TIM2_CLK_ENABLE() do { \
|
|
__IO uint32_t tmpreg = 0x00U; \
|
|
SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM2EN);\
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM2EN);\
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
#define __HAL_RCC_TIM3_CLK_ENABLE() do { \
|
|
__IO uint32_t tmpreg = 0x00U; \
|
|
SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM3EN);\
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM3EN);\
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
#define __HAL_RCC_TIM4_CLK_ENABLE() do { \
|
|
__IO uint32_t tmpreg = 0x00U; \
|
|
SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM4EN);\
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM4EN);\
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
#define __HAL_RCC_SPI3_CLK_ENABLE() do { \
|
|
__IO uint32_t tmpreg = 0x00U; \
|
|
SET_BIT(RCC->APB1ENR, RCC_APB1ENR_SPI3EN);\
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_SPI3EN);\
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
#define __HAL_RCC_I2C3_CLK_ENABLE() do { \
|
|
__IO uint32_t tmpreg = 0x00U; \
|
|
SET_BIT(RCC->APB1ENR, RCC_APB1ENR_I2C3EN);\
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_I2C3EN);\
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
#define __HAL_RCC_TIM2_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM2EN))
|
|
#define __HAL_RCC_TIM3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM3EN))
|
|
#define __HAL_RCC_TIM4_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM4EN))
|
|
#define __HAL_RCC_SPI3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_SPI3EN))
|
|
#define __HAL_RCC_I2C3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_I2C3EN))
|
|
#define __HAL_RCC_TIM6_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM6EN))
|
|
#define __HAL_RCC_TIM7_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM7EN))
|
|
#define __HAL_RCC_TIM12_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM12EN))
|
|
#define __HAL_RCC_TIM13_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM13EN))
|
|
#define __HAL_RCC_TIM14_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM14EN))
|
|
#define __HAL_RCC_USART3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_USART3EN))
|
|
#define __HAL_RCC_UART4_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_UART4EN))
|
|
#define __HAL_RCC_UART5_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_UART5EN))
|
|
#define __HAL_RCC_CAN1_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_CAN1EN))
|
|
#define __HAL_RCC_CAN2_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_CAN2EN))
|
|
#define __HAL_RCC_DAC_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_DACEN))
|
|
#define __HAL_RCC_UART7_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_UART7EN))
|
|
#define __HAL_RCC_UART8_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_UART8EN))
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RCCEx_APB1_Peripheral_Clock_Enable_Disable_Status APB1 Peripheral Clock Enable Disable Status
|
|
* @brief Get the enable or disable status of the APB1 peripheral clock.
|
|
* @note After reset, the peripheral clock (used for registers read/write access)
|
|
* is disabled and the application software has to enable this clock before
|
|
* using it.
|
|
* @{
|
|
*/
|
|
#define __HAL_RCC_TIM2_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM2EN)) != RESET)
|
|
#define __HAL_RCC_TIM3_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM3EN)) != RESET)
|
|
#define __HAL_RCC_TIM4_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM4EN)) != RESET)
|
|
#define __HAL_RCC_SPI3_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_SPI3EN)) != RESET)
|
|
#define __HAL_RCC_I2C3_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_I2C3EN)) != RESET)
|
|
#define __HAL_RCC_TIM6_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM6EN)) != RESET)
|
|
#define __HAL_RCC_TIM7_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM7EN)) != RESET)
|
|
#define __HAL_RCC_TIM12_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM12EN)) != RESET)
|
|
#define __HAL_RCC_TIM13_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM13EN)) != RESET)
|
|
#define __HAL_RCC_TIM14_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM14EN)) != RESET)
|
|
#define __HAL_RCC_USART3_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_USART3EN)) != RESET)
|
|
#define __HAL_RCC_UART4_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_UART4EN)) != RESET)
|
|
#define __HAL_RCC_UART5_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_UART5EN)) != RESET)
|
|
#define __HAL_RCC_CAN1_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_CAN1EN)) != RESET)
|
|
#define __HAL_RCC_CAN2_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_CAN2EN)) != RESET)
|
|
#define __HAL_RCC_DAC_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_DACEN)) != RESET)
|
|
#define __HAL_RCC_UART7_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_UART7EN)) != RESET)
|
|
#define __HAL_RCC_UART8_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_UART8EN)) != RESET)
|
|
|
|
#define __HAL_RCC_TIM2_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM2EN)) == RESET)
|
|
#define __HAL_RCC_TIM3_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM3EN)) == RESET)
|
|
#define __HAL_RCC_TIM4_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM4EN)) == RESET)
|
|
#define __HAL_RCC_SPI3_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_SPI3EN)) == RESET)
|
|
#define __HAL_RCC_I2C3_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_I2C3EN)) == RESET)
|
|
#define __HAL_RCC_TIM6_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM6EN)) == RESET)
|
|
#define __HAL_RCC_TIM7_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM7EN)) == RESET)
|
|
#define __HAL_RCC_TIM12_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM12EN)) == RESET)
|
|
#define __HAL_RCC_TIM13_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM13EN)) == RESET)
|
|
#define __HAL_RCC_TIM14_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM14EN)) == RESET)
|
|
#define __HAL_RCC_USART3_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_USART3EN)) == RESET)
|
|
#define __HAL_RCC_UART4_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_UART4EN)) == RESET)
|
|
#define __HAL_RCC_UART5_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_UART5EN)) == RESET)
|
|
#define __HAL_RCC_CAN1_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_CAN1EN)) == RESET)
|
|
#define __HAL_RCC_CAN2_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_CAN2EN)) == RESET)
|
|
#define __HAL_RCC_DAC_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_DACEN)) == RESET)
|
|
#define __HAL_RCC_UART7_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_UART7EN)) == RESET)
|
|
#define __HAL_RCC_UART8_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_UART8EN)) == RESET)
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RCCEx_APB2_Clock_Enable_Disable APB2 Peripheral Clock Enable Disable
|
|
* @brief Enable or disable the High Speed APB (APB2) peripheral clock.
|
|
* @note After reset, the peripheral clock (used for registers read/write access)
|
|
* is disabled and the application software has to enable this clock before
|
|
* using it.
|
|
* @{
|
|
*/
|
|
#define __HAL_RCC_TIM8_CLK_ENABLE() do { \
|
|
__IO uint32_t tmpreg = 0x00U; \
|
|
SET_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM8EN);\
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM8EN);\
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
#define __HAL_RCC_ADC2_CLK_ENABLE() do { \
|
|
__IO uint32_t tmpreg = 0x00U; \
|
|
SET_BIT(RCC->APB2ENR, RCC_APB2ENR_ADC2EN);\
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_ADC2EN);\
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
#define __HAL_RCC_ADC3_CLK_ENABLE() do { \
|
|
__IO uint32_t tmpreg = 0x00U; \
|
|
SET_BIT(RCC->APB2ENR, RCC_APB2ENR_ADC3EN);\
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_ADC3EN);\
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
#define __HAL_RCC_SPI5_CLK_ENABLE() do { \
|
|
__IO uint32_t tmpreg = 0x00U; \
|
|
SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI5EN);\
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI5EN);\
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
#define __HAL_RCC_SPI6_CLK_ENABLE() do { \
|
|
__IO uint32_t tmpreg = 0x00U; \
|
|
SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI6EN);\
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI6EN);\
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
#define __HAL_RCC_SAI1_CLK_ENABLE() do { \
|
|
__IO uint32_t tmpreg = 0x00U; \
|
|
SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SAI1EN);\
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SAI1EN);\
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
#define __HAL_RCC_SDIO_CLK_ENABLE() do { \
|
|
__IO uint32_t tmpreg = 0x00U; \
|
|
SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SDIOEN);\
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SDIOEN);\
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
#define __HAL_RCC_SPI4_CLK_ENABLE() do { \
|
|
__IO uint32_t tmpreg = 0x00U; \
|
|
SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI4EN);\
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI4EN);\
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
#define __HAL_RCC_TIM10_CLK_ENABLE() do { \
|
|
__IO uint32_t tmpreg = 0x00U; \
|
|
SET_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM10EN);\
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM10EN);\
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
#define __HAL_RCC_SDIO_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SDIOEN))
|
|
#define __HAL_RCC_SPI4_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SPI4EN))
|
|
#define __HAL_RCC_TIM10_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_TIM10EN))
|
|
#define __HAL_RCC_TIM8_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_TIM8EN))
|
|
#define __HAL_RCC_ADC2_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_ADC2EN))
|
|
#define __HAL_RCC_ADC3_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_ADC3EN))
|
|
#define __HAL_RCC_SPI5_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SPI5EN))
|
|
#define __HAL_RCC_SPI6_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SPI6EN))
|
|
#define __HAL_RCC_SAI1_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SAI1EN))
|
|
|
|
#if defined(STM32F429xx)|| defined(STM32F439xx) || defined(STM32F469xx) || defined(STM32F479xx)
|
|
#define __HAL_RCC_LTDC_CLK_ENABLE() do { \
|
|
__IO uint32_t tmpreg = 0x00U; \
|
|
SET_BIT(RCC->APB2ENR, RCC_APB2ENR_LTDCEN);\
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_LTDCEN);\
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
|
|
#define __HAL_RCC_LTDC_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_LTDCEN))
|
|
#endif /* STM32F429xx || STM32F439xx || STM32F469xx || STM32F479xx */
|
|
|
|
#if defined(STM32F469xx) || defined(STM32F479xx)
|
|
#define __HAL_RCC_DSI_CLK_ENABLE() do { \
|
|
__IO uint32_t tmpreg = 0x00U; \
|
|
SET_BIT(RCC->APB2ENR, RCC_APB2ENR_DSIEN);\
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_DSIEN);\
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
|
|
#define __HAL_RCC_DSI_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_DSIEN))
|
|
#endif /* STM32F469xx || STM32F479xx */
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RCCEx_APB2_Peripheral_Clock_Enable_Disable_Status APB2 Peripheral Clock Enable Disable Status
|
|
* @brief Get the enable or disable status of the APB2 peripheral clock.
|
|
* @note After reset, the peripheral clock (used for registers read/write access)
|
|
* is disabled and the application software has to enable this clock before
|
|
* using it.
|
|
* @{
|
|
*/
|
|
#define __HAL_RCC_TIM8_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM8EN)) != RESET)
|
|
#define __HAL_RCC_ADC2_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_ADC2EN)) != RESET)
|
|
#define __HAL_RCC_ADC3_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_ADC3EN)) != RESET)
|
|
#define __HAL_RCC_SPI5_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SPI5EN)) != RESET)
|
|
#define __HAL_RCC_SPI6_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SPI6EN)) != RESET)
|
|
#define __HAL_RCC_SAI1_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SAI1EN)) != RESET)
|
|
#define __HAL_RCC_SDIO_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SDIOEN)) != RESET)
|
|
#define __HAL_RCC_SPI4_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SPI4EN)) != RESET)
|
|
#define __HAL_RCC_TIM10_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM10EN))!= RESET)
|
|
|
|
#define __HAL_RCC_SDIO_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SDIOEN)) == RESET)
|
|
#define __HAL_RCC_SPI4_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SPI4EN)) == RESET)
|
|
#define __HAL_RCC_TIM10_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM10EN))== RESET)
|
|
#define __HAL_RCC_TIM8_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM8EN)) == RESET)
|
|
#define __HAL_RCC_ADC2_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_ADC2EN)) == RESET)
|
|
#define __HAL_RCC_ADC3_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_ADC3EN)) == RESET)
|
|
#define __HAL_RCC_SPI5_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SPI5EN)) == RESET)
|
|
#define __HAL_RCC_SPI6_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SPI6EN)) == RESET)
|
|
#define __HAL_RCC_SAI1_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SAI1EN)) == RESET)
|
|
|
|
#if defined(STM32F429xx)|| defined(STM32F439xx) || defined(STM32F469xx) || defined(STM32F479xx)
|
|
#define __HAL_RCC_LTDC_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_LTDCEN)) != RESET)
|
|
#define __HAL_RCC_LTDC_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_LTDCEN)) == RESET)
|
|
#endif /* STM32F429xx || STM32F439xx || STM32F469xx || STM32F479xx */
|
|
|
|
#if defined(STM32F469xx) || defined(STM32F479xx)
|
|
#define __HAL_RCC_DSI_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_DSIEN)) != RESET)
|
|
#define __HAL_RCC_DSI_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_DSIEN)) == RESET)
|
|
#endif /* STM32F469xx || STM32F479xx */
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RCCEx_AHB1_Force_Release_Reset AHB1 Force Release Reset
|
|
* @brief Force or release AHB1 peripheral reset.
|
|
* @{
|
|
*/
|
|
#define __HAL_RCC_GPIOD_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIODRST))
|
|
#define __HAL_RCC_GPIOE_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOERST))
|
|
#define __HAL_RCC_GPIOF_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOFRST))
|
|
#define __HAL_RCC_GPIOG_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOGRST))
|
|
#define __HAL_RCC_GPIOI_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOIRST))
|
|
#define __HAL_RCC_ETHMAC_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_ETHMACRST))
|
|
#define __HAL_RCC_USB_OTG_HS_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_OTGHRST))
|
|
#define __HAL_RCC_GPIOJ_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOJRST))
|
|
#define __HAL_RCC_GPIOK_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOKRST))
|
|
#define __HAL_RCC_DMA2D_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_DMA2DRST))
|
|
#define __HAL_RCC_CRC_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_CRCRST))
|
|
|
|
#define __HAL_RCC_GPIOD_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIODRST))
|
|
#define __HAL_RCC_GPIOE_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOERST))
|
|
#define __HAL_RCC_GPIOF_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOFRST))
|
|
#define __HAL_RCC_GPIOG_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOGRST))
|
|
#define __HAL_RCC_GPIOI_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOIRST))
|
|
#define __HAL_RCC_ETHMAC_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_ETHMACRST))
|
|
#define __HAL_RCC_USB_OTG_HS_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_OTGHRST))
|
|
#define __HAL_RCC_GPIOJ_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOJRST))
|
|
#define __HAL_RCC_GPIOK_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOKRST))
|
|
#define __HAL_RCC_DMA2D_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_DMA2DRST))
|
|
#define __HAL_RCC_CRC_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_CRCRST))
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RCCEx_AHB2_Force_Release_Reset AHB2 Force Release Reset
|
|
* @brief Force or release AHB2 peripheral reset.
|
|
* @{
|
|
*/
|
|
#define __HAL_RCC_AHB2_FORCE_RESET() (RCC->AHB2RSTR = 0xFFFFFFFFU)
|
|
#define __HAL_RCC_USB_OTG_FS_FORCE_RESET() (RCC->AHB2RSTR |= (RCC_AHB2RSTR_OTGFSRST))
|
|
#define __HAL_RCC_RNG_FORCE_RESET() (RCC->AHB2RSTR |= (RCC_AHB2RSTR_RNGRST))
|
|
#define __HAL_RCC_DCMI_FORCE_RESET() (RCC->AHB2RSTR |= (RCC_AHB2RSTR_DCMIRST))
|
|
|
|
#define __HAL_RCC_AHB2_RELEASE_RESET() (RCC->AHB2RSTR = 0x00U)
|
|
#define __HAL_RCC_USB_OTG_FS_RELEASE_RESET() (RCC->AHB2RSTR &= ~(RCC_AHB2RSTR_OTGFSRST))
|
|
#define __HAL_RCC_RNG_RELEASE_RESET() (RCC->AHB2RSTR &= ~(RCC_AHB2RSTR_RNGRST))
|
|
#define __HAL_RCC_DCMI_RELEASE_RESET() (RCC->AHB2RSTR &= ~(RCC_AHB2RSTR_DCMIRST))
|
|
|
|
#if defined(STM32F437xx)|| defined(STM32F439xx) || defined(STM32F479xx)
|
|
#define __HAL_RCC_CRYP_FORCE_RESET() (RCC->AHB2RSTR |= (RCC_AHB2RSTR_CRYPRST))
|
|
#define __HAL_RCC_HASH_FORCE_RESET() (RCC->AHB2RSTR |= (RCC_AHB2RSTR_HASHRST))
|
|
|
|
#define __HAL_RCC_CRYP_RELEASE_RESET() (RCC->AHB2RSTR &= ~(RCC_AHB2RSTR_CRYPRST))
|
|
#define __HAL_RCC_HASH_RELEASE_RESET() (RCC->AHB2RSTR &= ~(RCC_AHB2RSTR_HASHRST))
|
|
#endif /* STM32F437xx || STM32F439xx || STM32F479xx */
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RCCEx_AHB3_Force_Release_Reset AHB3 Force Release Reset
|
|
* @brief Force or release AHB3 peripheral reset.
|
|
* @{
|
|
*/
|
|
#define __HAL_RCC_AHB3_FORCE_RESET() (RCC->AHB3RSTR = 0xFFFFFFFFU)
|
|
#define __HAL_RCC_AHB3_RELEASE_RESET() (RCC->AHB3RSTR = 0x00U)
|
|
#define __HAL_RCC_FMC_FORCE_RESET() (RCC->AHB3RSTR |= (RCC_AHB3RSTR_FMCRST))
|
|
#define __HAL_RCC_FMC_RELEASE_RESET() (RCC->AHB3RSTR &= ~(RCC_AHB3RSTR_FMCRST))
|
|
|
|
#if defined(STM32F469xx) || defined(STM32F479xx)
|
|
#define __HAL_RCC_QSPI_FORCE_RESET() (RCC->AHB3RSTR |= (RCC_AHB3RSTR_QSPIRST))
|
|
#define __HAL_RCC_QSPI_RELEASE_RESET() (RCC->AHB3RSTR &= ~(RCC_AHB3RSTR_QSPIRST))
|
|
#endif /* STM32F469xx || STM32F479xx */
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RCCEx_APB1_Force_Release_Reset APB1 Force Release Reset
|
|
* @brief Force or release APB1 peripheral reset.
|
|
* @{
|
|
*/
|
|
#define __HAL_RCC_TIM6_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM6RST))
|
|
#define __HAL_RCC_TIM7_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM7RST))
|
|
#define __HAL_RCC_TIM12_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM12RST))
|
|
#define __HAL_RCC_TIM13_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM13RST))
|
|
#define __HAL_RCC_TIM14_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM14RST))
|
|
#define __HAL_RCC_USART3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_USART3RST))
|
|
#define __HAL_RCC_UART4_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_UART4RST))
|
|
#define __HAL_RCC_UART5_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_UART5RST))
|
|
#define __HAL_RCC_CAN1_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_CAN1RST))
|
|
#define __HAL_RCC_CAN2_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_CAN2RST))
|
|
#define __HAL_RCC_DAC_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_DACRST))
|
|
#define __HAL_RCC_UART7_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_UART7RST))
|
|
#define __HAL_RCC_UART8_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_UART8RST))
|
|
#define __HAL_RCC_TIM2_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM2RST))
|
|
#define __HAL_RCC_TIM3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM3RST))
|
|
#define __HAL_RCC_TIM4_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM4RST))
|
|
#define __HAL_RCC_SPI3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_SPI3RST))
|
|
#define __HAL_RCC_I2C3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_I2C3RST))
|
|
|
|
#define __HAL_RCC_TIM2_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM2RST))
|
|
#define __HAL_RCC_TIM3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM3RST))
|
|
#define __HAL_RCC_TIM4_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM4RST))
|
|
#define __HAL_RCC_SPI3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_SPI3RST))
|
|
#define __HAL_RCC_I2C3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_I2C3RST))
|
|
#define __HAL_RCC_TIM6_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM6RST))
|
|
#define __HAL_RCC_TIM7_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM7RST))
|
|
#define __HAL_RCC_TIM12_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM12RST))
|
|
#define __HAL_RCC_TIM13_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM13RST))
|
|
#define __HAL_RCC_TIM14_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM14RST))
|
|
#define __HAL_RCC_USART3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_USART3RST))
|
|
#define __HAL_RCC_UART4_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_UART4RST))
|
|
#define __HAL_RCC_UART5_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_UART5RST))
|
|
#define __HAL_RCC_CAN1_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_CAN1RST))
|
|
#define __HAL_RCC_CAN2_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_CAN2RST))
|
|
#define __HAL_RCC_DAC_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_DACRST))
|
|
#define __HAL_RCC_UART7_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_UART7RST))
|
|
#define __HAL_RCC_UART8_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_UART8RST))
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RCCEx_APB2_Force_Release_Reset APB2 Force Release Reset
|
|
* @brief Force or release APB2 peripheral reset.
|
|
* @{
|
|
*/
|
|
#define __HAL_RCC_TIM8_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM8RST))
|
|
#define __HAL_RCC_SPI5_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SPI5RST))
|
|
#define __HAL_RCC_SPI6_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SPI6RST))
|
|
#define __HAL_RCC_SAI1_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SAI1RST))
|
|
#define __HAL_RCC_SDIO_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SDIORST))
|
|
#define __HAL_RCC_SPI4_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SPI4RST))
|
|
#define __HAL_RCC_TIM10_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM10RST))
|
|
|
|
#define __HAL_RCC_SDIO_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SDIORST))
|
|
#define __HAL_RCC_SPI4_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SPI4RST))
|
|
#define __HAL_RCC_TIM10_RELEASE_RESET()(RCC->APB2RSTR &= ~(RCC_APB2RSTR_TIM10RST))
|
|
#define __HAL_RCC_TIM8_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_TIM8RST))
|
|
#define __HAL_RCC_SPI5_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SPI5RST))
|
|
#define __HAL_RCC_SPI6_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SPI6RST))
|
|
#define __HAL_RCC_SAI1_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SAI1RST))
|
|
|
|
#if defined(STM32F429xx)|| defined(STM32F439xx) || defined(STM32F469xx) || defined(STM32F479xx)
|
|
#define __HAL_RCC_LTDC_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_LTDCRST))
|
|
#define __HAL_RCC_LTDC_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_LTDCRST))
|
|
#endif /* STM32F429xx|| STM32F439xx || STM32F469xx || STM32F479xx */
|
|
|
|
#if defined(STM32F469xx) || defined(STM32F479xx)
|
|
#define __HAL_RCC_DSI_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_DSIRST))
|
|
#define __HAL_RCC_DSI_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_DSIRST))
|
|
#endif /* STM32F469xx || STM32F479xx */
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RCCEx_AHB1_LowPower_Enable_Disable AHB1 Peripheral Low Power Enable Disable
|
|
* @brief Enable or disable the AHB1 peripheral clock during Low Power (Sleep) mode.
|
|
* @note Peripheral clock gating in SLEEP mode can be used to further reduce
|
|
* power consumption.
|
|
* @note After wakeup from SLEEP mode, the peripheral clock is enabled again.
|
|
* @note By default, all peripheral clocks are enabled during SLEEP mode.
|
|
* @{
|
|
*/
|
|
#define __HAL_RCC_GPIOD_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIODLPEN))
|
|
#define __HAL_RCC_GPIOE_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOELPEN))
|
|
#define __HAL_RCC_GPIOF_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOFLPEN))
|
|
#define __HAL_RCC_GPIOG_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOGLPEN))
|
|
#define __HAL_RCC_GPIOI_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOILPEN))
|
|
#define __HAL_RCC_SRAM2_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_SRAM2LPEN))
|
|
#define __HAL_RCC_ETHMAC_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_ETHMACLPEN))
|
|
#define __HAL_RCC_ETHMACTX_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_ETHMACTXLPEN))
|
|
#define __HAL_RCC_ETHMACRX_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_ETHMACRXLPEN))
|
|
#define __HAL_RCC_ETHMACPTP_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_ETHMACPTPLPEN))
|
|
#define __HAL_RCC_USB_OTG_HS_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_OTGHSLPEN))
|
|
#define __HAL_RCC_USB_OTG_HS_ULPI_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_OTGHSULPILPEN))
|
|
#define __HAL_RCC_GPIOJ_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOJLPEN))
|
|
#define __HAL_RCC_GPIOK_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOKLPEN))
|
|
#define __HAL_RCC_SRAM3_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_SRAM3LPEN))
|
|
#define __HAL_RCC_DMA2D_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_DMA2DLPEN))
|
|
#define __HAL_RCC_CRC_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_CRCLPEN))
|
|
#define __HAL_RCC_FLITF_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_FLITFLPEN))
|
|
#define __HAL_RCC_SRAM1_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_SRAM1LPEN))
|
|
#define __HAL_RCC_BKPSRAM_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_BKPSRAMLPEN))
|
|
|
|
#define __HAL_RCC_GPIOD_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIODLPEN))
|
|
#define __HAL_RCC_GPIOE_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOELPEN))
|
|
#define __HAL_RCC_GPIOF_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOFLPEN))
|
|
#define __HAL_RCC_GPIOG_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOGLPEN))
|
|
#define __HAL_RCC_GPIOI_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOILPEN))
|
|
#define __HAL_RCC_SRAM2_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_SRAM2LPEN))
|
|
#define __HAL_RCC_ETHMAC_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_ETHMACLPEN))
|
|
#define __HAL_RCC_ETHMACTX_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_ETHMACTXLPEN))
|
|
#define __HAL_RCC_ETHMACRX_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_ETHMACRXLPEN))
|
|
#define __HAL_RCC_ETHMACPTP_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_ETHMACPTPLPEN))
|
|
#define __HAL_RCC_USB_OTG_HS_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_OTGHSLPEN))
|
|
#define __HAL_RCC_USB_OTG_HS_ULPI_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_OTGHSULPILPEN))
|
|
#define __HAL_RCC_GPIOJ_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOJLPEN))
|
|
#define __HAL_RCC_GPIOK_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOKLPEN))
|
|
#define __HAL_RCC_DMA2D_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_DMA2DLPEN))
|
|
#define __HAL_RCC_CRC_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_CRCLPEN))
|
|
#define __HAL_RCC_FLITF_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_FLITFLPEN))
|
|
#define __HAL_RCC_SRAM1_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_SRAM1LPEN))
|
|
#define __HAL_RCC_BKPSRAM_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_BKPSRAMLPEN))
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RCCEx_AHB2_LowPower_Enable_Disable AHB2 Peripheral Low Power Enable Disable
|
|
* @brief Enable or disable the AHB2 peripheral clock during Low Power (Sleep) mode.
|
|
* @note Peripheral clock gating in SLEEP mode can be used to further reduce
|
|
* power consumption.
|
|
* @note After wake-up from SLEEP mode, the peripheral clock is enabled again.
|
|
* @note By default, all peripheral clocks are enabled during SLEEP mode.
|
|
* @{
|
|
*/
|
|
#define __HAL_RCC_USB_OTG_FS_CLK_SLEEP_ENABLE() (RCC->AHB2LPENR |= (RCC_AHB2LPENR_OTGFSLPEN))
|
|
#define __HAL_RCC_USB_OTG_FS_CLK_SLEEP_DISABLE() (RCC->AHB2LPENR &= ~(RCC_AHB2LPENR_OTGFSLPEN))
|
|
|
|
#define __HAL_RCC_RNG_CLK_SLEEP_ENABLE() (RCC->AHB2LPENR |= (RCC_AHB2LPENR_RNGLPEN))
|
|
#define __HAL_RCC_RNG_CLK_SLEEP_DISABLE() (RCC->AHB2LPENR &= ~(RCC_AHB2LPENR_RNGLPEN))
|
|
|
|
#define __HAL_RCC_DCMI_CLK_SLEEP_ENABLE() (RCC->AHB2LPENR |= (RCC_AHB2LPENR_DCMILPEN))
|
|
#define __HAL_RCC_DCMI_CLK_SLEEP_DISABLE() (RCC->AHB2LPENR &= ~(RCC_AHB2LPENR_DCMILPEN))
|
|
|
|
#if defined(STM32F437xx)|| defined(STM32F439xx) || defined(STM32F479xx)
|
|
#define __HAL_RCC_CRYP_CLK_SLEEP_ENABLE() (RCC->AHB2LPENR |= (RCC_AHB2LPENR_CRYPLPEN))
|
|
#define __HAL_RCC_HASH_CLK_SLEEP_ENABLE() (RCC->AHB2LPENR |= (RCC_AHB2LPENR_HASHLPEN))
|
|
|
|
#define __HAL_RCC_CRYP_CLK_SLEEP_DISABLE() (RCC->AHB2LPENR &= ~(RCC_AHB2LPENR_CRYPLPEN))
|
|
#define __HAL_RCC_HASH_CLK_SLEEP_DISABLE() (RCC->AHB2LPENR &= ~(RCC_AHB2LPENR_HASHLPEN))
|
|
#endif /* STM32F437xx || STM32F439xx || STM32F479xx */
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RCCEx_AHB3_LowPower_Enable_Disable AHB3 Peripheral Low Power Enable Disable
|
|
* @brief Enable or disable the AHB3 peripheral clock during Low Power (Sleep) mode.
|
|
* @note Peripheral clock gating in SLEEP mode can be used to further reduce
|
|
* power consumption.
|
|
* @note After wakeup from SLEEP mode, the peripheral clock is enabled again.
|
|
* @note By default, all peripheral clocks are enabled during SLEEP mode.
|
|
* @{
|
|
*/
|
|
#define __HAL_RCC_FMC_CLK_SLEEP_ENABLE() (RCC->AHB3LPENR |= (RCC_AHB3LPENR_FMCLPEN))
|
|
#define __HAL_RCC_FMC_CLK_SLEEP_DISABLE() (RCC->AHB3LPENR &= ~(RCC_AHB3LPENR_FMCLPEN))
|
|
|
|
#if defined(STM32F469xx) || defined(STM32F479xx)
|
|
#define __HAL_RCC_QSPI_CLK_SLEEP_ENABLE() (RCC->AHB3LPENR |= (RCC_AHB3LPENR_QSPILPEN))
|
|
#define __HAL_RCC_QSPI_CLK_SLEEP_DISABLE() (RCC->AHB3LPENR &= ~(RCC_AHB3LPENR_QSPILPEN))
|
|
#endif /* STM32F469xx || STM32F479xx */
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RCCEx_APB1_LowPower_Enable_Disable APB1 Peripheral Low Power Enable Disable
|
|
* @brief Enable or disable the APB1 peripheral clock during Low Power (Sleep) mode.
|
|
* @note Peripheral clock gating in SLEEP mode can be used to further reduce
|
|
* power consumption.
|
|
* @note After wakeup from SLEEP mode, the peripheral clock is enabled again.
|
|
* @note By default, all peripheral clocks are enabled during SLEEP mode.
|
|
* @{
|
|
*/
|
|
#define __HAL_RCC_TIM6_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM6LPEN))
|
|
#define __HAL_RCC_TIM7_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM7LPEN))
|
|
#define __HAL_RCC_TIM12_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM12LPEN))
|
|
#define __HAL_RCC_TIM13_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM13LPEN))
|
|
#define __HAL_RCC_TIM14_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM14LPEN))
|
|
#define __HAL_RCC_USART3_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_USART3LPEN))
|
|
#define __HAL_RCC_UART4_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_UART4LPEN))
|
|
#define __HAL_RCC_UART5_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_UART5LPEN))
|
|
#define __HAL_RCC_CAN1_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_CAN1LPEN))
|
|
#define __HAL_RCC_CAN2_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_CAN2LPEN))
|
|
#define __HAL_RCC_DAC_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_DACLPEN))
|
|
#define __HAL_RCC_UART7_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_UART7LPEN))
|
|
#define __HAL_RCC_UART8_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_UART8LPEN))
|
|
#define __HAL_RCC_TIM2_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM2LPEN))
|
|
#define __HAL_RCC_TIM3_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM3LPEN))
|
|
#define __HAL_RCC_TIM4_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM4LPEN))
|
|
#define __HAL_RCC_SPI3_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_SPI3LPEN))
|
|
#define __HAL_RCC_I2C3_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_I2C3LPEN))
|
|
|
|
#define __HAL_RCC_TIM2_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM2LPEN))
|
|
#define __HAL_RCC_TIM3_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM3LPEN))
|
|
#define __HAL_RCC_TIM4_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM4LPEN))
|
|
#define __HAL_RCC_SPI3_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_SPI3LPEN))
|
|
#define __HAL_RCC_I2C3_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_I2C3LPEN))
|
|
#define __HAL_RCC_TIM6_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM6LPEN))
|
|
#define __HAL_RCC_TIM7_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM7LPEN))
|
|
#define __HAL_RCC_TIM12_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM12LPEN))
|
|
#define __HAL_RCC_TIM13_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM13LPEN))
|
|
#define __HAL_RCC_TIM14_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM14LPEN))
|
|
#define __HAL_RCC_USART3_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_USART3LPEN))
|
|
#define __HAL_RCC_UART4_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_UART4LPEN))
|
|
#define __HAL_RCC_UART5_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_UART5LPEN))
|
|
#define __HAL_RCC_CAN1_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_CAN1LPEN))
|
|
#define __HAL_RCC_CAN2_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_CAN2LPEN))
|
|
#define __HAL_RCC_DAC_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_DACLPEN))
|
|
#define __HAL_RCC_UART7_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_UART7LPEN))
|
|
#define __HAL_RCC_UART8_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_UART8LPEN))
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RCCEx_APB2_LowPower_Enable_Disable APB2 Peripheral Low Power Enable Disable
|
|
* @brief Enable or disable the APB2 peripheral clock during Low Power (Sleep) mode.
|
|
* @note Peripheral clock gating in SLEEP mode can be used to further reduce
|
|
* power consumption.
|
|
* @note After wakeup from SLEEP mode, the peripheral clock is enabled again.
|
|
* @note By default, all peripheral clocks are enabled during SLEEP mode.
|
|
* @{
|
|
*/
|
|
#define __HAL_RCC_TIM8_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_TIM8LPEN))
|
|
#define __HAL_RCC_ADC2_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_ADC2LPEN))
|
|
#define __HAL_RCC_ADC3_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_ADC3LPEN))
|
|
#define __HAL_RCC_SPI5_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_SPI5LPEN))
|
|
#define __HAL_RCC_SPI6_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_SPI6LPEN))
|
|
#define __HAL_RCC_SAI1_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_SAI1LPEN))
|
|
#define __HAL_RCC_SDIO_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_SDIOLPEN))
|
|
#define __HAL_RCC_SPI4_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_SPI4LPEN))
|
|
#define __HAL_RCC_TIM10_CLK_SLEEP_ENABLE()(RCC->APB2LPENR |= (RCC_APB2LPENR_TIM10LPEN))
|
|
|
|
#define __HAL_RCC_SDIO_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_SDIOLPEN))
|
|
#define __HAL_RCC_SPI4_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_SPI4LPEN))
|
|
#define __HAL_RCC_TIM10_CLK_SLEEP_DISABLE()(RCC->APB2LPENR &= ~(RCC_APB2LPENR_TIM10LPEN))
|
|
#define __HAL_RCC_TIM8_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_TIM8LPEN))
|
|
#define __HAL_RCC_ADC2_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_ADC2LPEN))
|
|
#define __HAL_RCC_ADC3_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_ADC3LPEN))
|
|
#define __HAL_RCC_SPI5_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_SPI5LPEN))
|
|
#define __HAL_RCC_SPI6_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_SPI6LPEN))
|
|
#define __HAL_RCC_SAI1_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_SAI1LPEN))
|
|
|
|
#if defined(STM32F429xx)|| defined(STM32F439xx) || defined(STM32F469xx) || defined(STM32F479xx)
|
|
#define __HAL_RCC_LTDC_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_LTDCLPEN))
|
|
|
|
#define __HAL_RCC_LTDC_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_LTDCLPEN))
|
|
#endif /* STM32F429xx || STM32F439xx || STM32F469xx || STM32F479xx */
|
|
|
|
#if defined(STM32F469xx) || defined(STM32F479xx)
|
|
#define __HAL_RCC_DSI_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_DSILPEN))
|
|
#define __HAL_RCC_DSI_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_DSILPEN))
|
|
#endif /* STM32F469xx || STM32F479xx */
|
|
/**
|
|
* @}
|
|
*/
|
|
#endif /* STM32F427xx || STM32F437xx || STM32F429xx|| STM32F439xx || STM32F469xx || STM32F479xx */
|
|
/*----------------------------------------------------------------------------*/
|
|
|
|
/*----------------------------------- STM32F40xxx/STM32F41xxx-----------------*/
|
|
#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx)|| defined(STM32F417xx)
|
|
/** @defgroup RCCEx_AHB1_Clock_Enable_Disable AHB1 Peripheral Clock Enable Disable
|
|
* @brief Enables or disables the AHB1 peripheral clock.
|
|
* @note After reset, the peripheral clock (used for registers read/write access)
|
|
* is disabled and the application software has to enable this clock before
|
|
* using it.
|
|
* @{
|
|
*/
|
|
#define __HAL_RCC_BKPSRAM_CLK_ENABLE() do { \
|
|
__IO uint32_t tmpreg = 0x00U; \
|
|
SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_BKPSRAMEN);\
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_BKPSRAMEN);\
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
#define __HAL_RCC_CCMDATARAMEN_CLK_ENABLE() do { \
|
|
__IO uint32_t tmpreg = 0x00U; \
|
|
SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_CCMDATARAMEN);\
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_CCMDATARAMEN);\
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
#define __HAL_RCC_CRC_CLK_ENABLE() do { \
|
|
__IO uint32_t tmpreg = 0x00U; \
|
|
SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_CRCEN);\
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_CRCEN);\
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
#define __HAL_RCC_GPIOD_CLK_ENABLE() do { \
|
|
__IO uint32_t tmpreg = 0x00U; \
|
|
SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIODEN);\
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIODEN);\
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
#define __HAL_RCC_GPIOE_CLK_ENABLE() do { \
|
|
__IO uint32_t tmpreg = 0x00U; \
|
|
SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOEEN);\
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOEEN);\
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
#define __HAL_RCC_GPIOI_CLK_ENABLE() do { \
|
|
__IO uint32_t tmpreg = 0x00U; \
|
|
SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOIEN);\
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOIEN);\
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
#define __HAL_RCC_GPIOF_CLK_ENABLE() do { \
|
|
__IO uint32_t tmpreg = 0x00U; \
|
|
SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOFEN);\
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOFEN);\
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
#define __HAL_RCC_GPIOG_CLK_ENABLE() do { \
|
|
__IO uint32_t tmpreg = 0x00U; \
|
|
SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOGEN);\
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOGEN);\
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
#define __HAL_RCC_USB_OTG_HS_CLK_ENABLE() do { \
|
|
__IO uint32_t tmpreg = 0x00U; \
|
|
SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_OTGHSEN);\
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_OTGHSEN);\
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
#define __HAL_RCC_USB_OTG_HS_ULPI_CLK_ENABLE() do { \
|
|
__IO uint32_t tmpreg = 0x00U; \
|
|
SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_OTGHSULPIEN);\
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_OTGHSULPIEN);\
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
#define __HAL_RCC_GPIOD_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIODEN))
|
|
#define __HAL_RCC_GPIOE_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOEEN))
|
|
#define __HAL_RCC_GPIOF_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOFEN))
|
|
#define __HAL_RCC_GPIOG_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOGEN))
|
|
#define __HAL_RCC_GPIOI_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOIEN))
|
|
#define __HAL_RCC_USB_OTG_HS_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_OTGHSEN))
|
|
#define __HAL_RCC_USB_OTG_HS_ULPI_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_OTGHSULPIEN))
|
|
#define __HAL_RCC_BKPSRAM_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_BKPSRAMEN))
|
|
#define __HAL_RCC_CCMDATARAMEN_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_CCMDATARAMEN))
|
|
#define __HAL_RCC_CRC_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_CRCEN))
|
|
#if defined(STM32F407xx)|| defined(STM32F417xx)
|
|
/**
|
|
* @brief Enable ETHERNET clock.
|
|
*/
|
|
#define __HAL_RCC_ETHMAC_CLK_ENABLE() do { \
|
|
__IO uint32_t tmpreg = 0x00U; \
|
|
SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_ETHMACEN);\
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_ETHMACEN);\
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
#define __HAL_RCC_ETHMACTX_CLK_ENABLE() do { \
|
|
__IO uint32_t tmpreg = 0x00U; \
|
|
SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_ETHMACTXEN);\
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_ETHMACTXEN);\
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
#define __HAL_RCC_ETHMACRX_CLK_ENABLE() do { \
|
|
__IO uint32_t tmpreg = 0x00U; \
|
|
SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_ETHMACRXEN);\
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_ETHMACRXEN);\
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
#define __HAL_RCC_ETHMACPTP_CLK_ENABLE() do { \
|
|
__IO uint32_t tmpreg = 0x00U; \
|
|
SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_ETHMACPTPEN);\
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_ETHMACPTPEN);\
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
#define __HAL_RCC_ETH_CLK_ENABLE() do { \
|
|
__HAL_RCC_ETHMAC_CLK_ENABLE(); \
|
|
__HAL_RCC_ETHMACTX_CLK_ENABLE(); \
|
|
__HAL_RCC_ETHMACRX_CLK_ENABLE(); \
|
|
} while(0)
|
|
|
|
/**
|
|
* @brief Disable ETHERNET clock.
|
|
*/
|
|
#define __HAL_RCC_ETHMAC_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_ETHMACEN))
|
|
#define __HAL_RCC_ETHMACTX_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_ETHMACTXEN))
|
|
#define __HAL_RCC_ETHMACRX_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_ETHMACRXEN))
|
|
#define __HAL_RCC_ETHMACPTP_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_ETHMACPTPEN))
|
|
#define __HAL_RCC_ETH_CLK_DISABLE() do { \
|
|
__HAL_RCC_ETHMACTX_CLK_DISABLE(); \
|
|
__HAL_RCC_ETHMACRX_CLK_DISABLE(); \
|
|
__HAL_RCC_ETHMAC_CLK_DISABLE(); \
|
|
} while(0)
|
|
#endif /* STM32F407xx || STM32F417xx */
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RCCEx_AHB1_Peripheral_Clock_Enable_Disable_Status AHB1 Peripheral Clock Enable Disable Status
|
|
* @brief Get the enable or disable status of the AHB1 peripheral clock.
|
|
* @note After reset, the peripheral clock (used for registers read/write access)
|
|
* is disabled and the application software has to enable this clock before
|
|
* using it.
|
|
* @{
|
|
*/
|
|
#define __HAL_RCC_BKPSRAM_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_BKPSRAMEN)) != RESET)
|
|
#define __HAL_RCC_CCMDATARAMEN_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_CCMDATARAMEN)) != RESET)
|
|
#define __HAL_RCC_CRC_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_CRCEN)) != RESET)
|
|
#define __HAL_RCC_GPIOD_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIODEN)) != RESET)
|
|
#define __HAL_RCC_GPIOE_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOEEN)) != RESET)
|
|
#define __HAL_RCC_GPIOI_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOIEN)) != RESET)
|
|
#define __HAL_RCC_GPIOF_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOFEN)) != RESET)
|
|
#define __HAL_RCC_GPIOG_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOGEN)) != RESET)
|
|
#define __HAL_RCC_USB_OTG_HS_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_OTGHSEN)) != RESET)
|
|
#define __HAL_RCC_USB_OTG_HS_ULPI_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_OTGHSULPIEN)) != RESET)
|
|
|
|
#define __HAL_RCC_GPIOD_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIODEN)) == RESET)
|
|
#define __HAL_RCC_GPIOE_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOEEN)) == RESET)
|
|
#define __HAL_RCC_GPIOF_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOFEN)) == RESET)
|
|
#define __HAL_RCC_GPIOG_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOGEN)) == RESET)
|
|
#define __HAL_RCC_GPIOI_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOIEN)) == RESET)
|
|
#define __HAL_RCC_USB_OTG_HS_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_OTGHSEN)) == RESET)
|
|
#define __HAL_RCC_USB_OTG_HS_ULPI_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_OTGHSULPIEN))== RESET)
|
|
#define __HAL_RCC_BKPSRAM_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_BKPSRAMEN)) == RESET)
|
|
#define __HAL_RCC_CCMDATARAMEN_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_CCMDATARAMEN)) == RESET)
|
|
#define __HAL_RCC_CRC_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_CRCEN)) == RESET)
|
|
#if defined(STM32F407xx)|| defined(STM32F417xx)
|
|
/**
|
|
* @brief Enable ETHERNET clock.
|
|
*/
|
|
#define __HAL_RCC_ETHMAC_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_ETHMACEN)) != RESET)
|
|
#define __HAL_RCC_ETHMACTX_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_ETHMACTXEN)) != RESET)
|
|
#define __HAL_RCC_ETHMACRX_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_ETHMACRXEN)) != RESET)
|
|
#define __HAL_RCC_ETHMACPTP_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_ETHMACPTPEN)) != RESET)
|
|
#define __HAL_RCC_ETH_IS_CLK_ENABLED() (__HAL_RCC_ETHMAC_IS_CLK_ENABLED() && \
|
|
__HAL_RCC_ETHMACTX_IS_CLK_ENABLED() && \
|
|
__HAL_RCC_ETHMACRX_IS_CLK_ENABLED())
|
|
/**
|
|
* @brief Disable ETHERNET clock.
|
|
*/
|
|
#define __HAL_RCC_ETHMAC_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_ETHMACEN)) == RESET)
|
|
#define __HAL_RCC_ETHMACTX_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_ETHMACTXEN)) == RESET)
|
|
#define __HAL_RCC_ETHMACRX_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_ETHMACRXEN)) == RESET)
|
|
#define __HAL_RCC_ETHMACPTP_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_ETHMACPTPEN)) == RESET)
|
|
#define __HAL_RCC_ETH_IS_CLK_DISABLED() (__HAL_RCC_ETHMAC_IS_CLK_DISABLED() && \
|
|
__HAL_RCC_ETHMACTX_IS_CLK_DISABLED() && \
|
|
__HAL_RCC_ETHMACRX_IS_CLK_DISABLED())
|
|
#endif /* STM32F407xx || STM32F417xx */
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RCCEx_AHB2_Clock_Enable_Disable AHB2 Peripheral Clock Enable Disable
|
|
* @brief Enable or disable the AHB2 peripheral clock.
|
|
* @note After reset, the peripheral clock (used for registers read/write access)
|
|
* is disabled and the application software has to enable this clock before
|
|
* using it.
|
|
* @{
|
|
*/
|
|
#define __HAL_RCC_USB_OTG_FS_CLK_ENABLE() do {(RCC->AHB2ENR |= (RCC_AHB2ENR_OTGFSEN));\
|
|
__HAL_RCC_SYSCFG_CLK_ENABLE();\
|
|
}while(0)
|
|
|
|
#define __HAL_RCC_USB_OTG_FS_CLK_DISABLE() (RCC->AHB2ENR &= ~(RCC_AHB2ENR_OTGFSEN))
|
|
|
|
#define __HAL_RCC_RNG_CLK_ENABLE() do { \
|
|
__IO uint32_t tmpreg = 0x00U; \
|
|
SET_BIT(RCC->AHB2ENR, RCC_AHB2ENR_RNGEN);\
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_RNGEN);\
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
#define __HAL_RCC_RNG_CLK_DISABLE() (RCC->AHB2ENR &= ~(RCC_AHB2ENR_RNGEN))
|
|
|
|
#if defined(STM32F407xx)|| defined(STM32F417xx)
|
|
#define __HAL_RCC_DCMI_CLK_ENABLE() do { \
|
|
__IO uint32_t tmpreg = 0x00U; \
|
|
SET_BIT(RCC->AHB2ENR, RCC_AHB2ENR_DCMIEN);\
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_DCMIEN);\
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
#define __HAL_RCC_DCMI_CLK_DISABLE() (RCC->AHB2ENR &= ~(RCC_AHB2ENR_DCMIEN))
|
|
#endif /* STM32F407xx || STM32F417xx */
|
|
|
|
#if defined(STM32F415xx) || defined(STM32F417xx)
|
|
#define __HAL_RCC_CRYP_CLK_ENABLE() do { \
|
|
__IO uint32_t tmpreg = 0x00U; \
|
|
SET_BIT(RCC->AHB2ENR, RCC_AHB2ENR_CRYPEN);\
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_CRYPEN);\
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
#define __HAL_RCC_HASH_CLK_ENABLE() do { \
|
|
__IO uint32_t tmpreg = 0x00U; \
|
|
SET_BIT(RCC->AHB2ENR, RCC_AHB2ENR_HASHEN);\
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_HASHEN);\
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
#define __HAL_RCC_CRYP_CLK_DISABLE() (RCC->AHB2ENR &= ~(RCC_AHB2ENR_CRYPEN))
|
|
#define __HAL_RCC_HASH_CLK_DISABLE() (RCC->AHB2ENR &= ~(RCC_AHB2ENR_HASHEN))
|
|
#endif /* STM32F415xx || STM32F417xx */
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
|
|
/** @defgroup RCCEx_AHB2_Peripheral_Clock_Enable_Disable_Status AHB2 Peripheral Clock Enable Disable Status
|
|
* @brief Get the enable or disable status of the AHB2 peripheral clock.
|
|
* @note After reset, the peripheral clock (used for registers read/write access)
|
|
* is disabled and the application software has to enable this clock before
|
|
* using it.
|
|
* @{
|
|
*/
|
|
#define __HAL_RCC_USB_OTG_FS_IS_CLK_ENABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_OTGFSEN)) != RESET)
|
|
#define __HAL_RCC_USB_OTG_FS_IS_CLK_DISABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_OTGFSEN)) == RESET)
|
|
|
|
#define __HAL_RCC_RNG_IS_CLK_ENABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_RNGEN)) != RESET)
|
|
#define __HAL_RCC_RNG_IS_CLK_DISABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_RNGEN)) == RESET)
|
|
|
|
#if defined(STM32F407xx)|| defined(STM32F417xx)
|
|
#define __HAL_RCC_DCMI_IS_CLK_ENABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_DCMIEN)) != RESET)
|
|
#define __HAL_RCC_DCMI_IS_CLK_DISABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_DCMIEN)) == RESET)
|
|
#endif /* STM32F407xx || STM32F417xx */
|
|
|
|
#if defined(STM32F415xx) || defined(STM32F417xx)
|
|
#define __HAL_RCC_CRYP_IS_CLK_ENABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_CRYPEN)) != RESET)
|
|
#define __HAL_RCC_HASH_IS_CLK_ENABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_HASHEN)) != RESET)
|
|
|
|
#define __HAL_RCC_CRYP_IS_CLK_DISABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_CRYPEN)) == RESET)
|
|
#define __HAL_RCC_HASH_IS_CLK_DISABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_HASHEN)) == RESET)
|
|
#endif /* STM32F415xx || STM32F417xx */
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RCCEx_AHB3_Clock_Enable_Disable AHB3 Peripheral Clock Enable Disable
|
|
* @brief Enables or disables the AHB3 peripheral clock.
|
|
* @note After reset, the peripheral clock (used for registers read/write access)
|
|
* is disabled and the application software has to enable this clock before
|
|
* using it.
|
|
* @{
|
|
*/
|
|
#define __HAL_RCC_FSMC_CLK_ENABLE() do { \
|
|
__IO uint32_t tmpreg = 0x00U; \
|
|
SET_BIT(RCC->AHB3ENR, RCC_AHB3ENR_FSMCEN);\
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_FSMCEN);\
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
#define __HAL_RCC_FSMC_CLK_DISABLE() (RCC->AHB3ENR &= ~(RCC_AHB3ENR_FSMCEN))
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RCCEx_AHB3_Peripheral_Clock_Enable_Disable_Status AHB3 Peripheral Clock Enable Disable Status
|
|
* @brief Get the enable or disable status of the AHB3 peripheral clock.
|
|
* @note After reset, the peripheral clock (used for registers read/write access)
|
|
* is disabled and the application software has to enable this clock before
|
|
* using it.
|
|
* @{
|
|
*/
|
|
#define __HAL_RCC_FSMC_IS_CLK_ENABLED() ((RCC->AHB3ENR & (RCC_AHB3ENR_FSMCEN)) != RESET)
|
|
#define __HAL_RCC_FSMC_IS_CLK_DISABLED() ((RCC->AHB3ENR & (RCC_AHB3ENR_FSMCEN)) == RESET)
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RCCEx_APB1_Clock_Enable_Disable APB1 Peripheral Clock Enable Disable
|
|
* @brief Enable or disable the Low Speed APB (APB1) peripheral clock.
|
|
* @note After reset, the peripheral clock (used for registers read/write access)
|
|
* is disabled and the application software has to enable this clock before
|
|
* using it.
|
|
* @{
|
|
*/
|
|
#define __HAL_RCC_TIM6_CLK_ENABLE() do { \
|
|
__IO uint32_t tmpreg = 0x00U; \
|
|
SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM6EN);\
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM6EN);\
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
#define __HAL_RCC_TIM7_CLK_ENABLE() do { \
|
|
__IO uint32_t tmpreg = 0x00U; \
|
|
SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM7EN);\
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM7EN);\
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
#define __HAL_RCC_TIM12_CLK_ENABLE() do { \
|
|
__IO uint32_t tmpreg = 0x00U; \
|
|
SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM12EN);\
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM12EN);\
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
#define __HAL_RCC_TIM13_CLK_ENABLE() do { \
|
|
__IO uint32_t tmpreg = 0x00U; \
|
|
SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM13EN);\
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM13EN);\
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
#define __HAL_RCC_TIM14_CLK_ENABLE() do { \
|
|
__IO uint32_t tmpreg = 0x00U; \
|
|
SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM14EN);\
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM14EN);\
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
#define __HAL_RCC_USART3_CLK_ENABLE() do { \
|
|
__IO uint32_t tmpreg = 0x00U; \
|
|
SET_BIT(RCC->APB1ENR, RCC_APB1ENR_USART3EN);\
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_USART3EN);\
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
#define __HAL_RCC_UART4_CLK_ENABLE() do { \
|
|
__IO uint32_t tmpreg = 0x00U; \
|
|
SET_BIT(RCC->APB1ENR, RCC_APB1ENR_UART4EN);\
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_UART4EN);\
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
#define __HAL_RCC_UART5_CLK_ENABLE() do { \
|
|
__IO uint32_t tmpreg = 0x00U; \
|
|
SET_BIT(RCC->APB1ENR, RCC_APB1ENR_UART5EN);\
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_UART5EN);\
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
#define __HAL_RCC_CAN1_CLK_ENABLE() do { \
|
|
__IO uint32_t tmpreg = 0x00U; \
|
|
SET_BIT(RCC->APB1ENR, RCC_APB1ENR_CAN1EN);\
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_CAN1EN);\
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
#define __HAL_RCC_CAN2_CLK_ENABLE() do { \
|
|
__IO uint32_t tmpreg = 0x00U; \
|
|
SET_BIT(RCC->APB1ENR, RCC_APB1ENR_CAN2EN);\
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_CAN2EN);\
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
#define __HAL_RCC_DAC_CLK_ENABLE() do { \
|
|
__IO uint32_t tmpreg = 0x00U; \
|
|
SET_BIT(RCC->APB1ENR, RCC_APB1ENR_DACEN);\
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_DACEN);\
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
#define __HAL_RCC_TIM2_CLK_ENABLE() do { \
|
|
__IO uint32_t tmpreg = 0x00U; \
|
|
SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM2EN);\
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM2EN);\
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
#define __HAL_RCC_TIM3_CLK_ENABLE() do { \
|
|
__IO uint32_t tmpreg = 0x00U; \
|
|
SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM3EN);\
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM3EN);\
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
#define __HAL_RCC_TIM4_CLK_ENABLE() do { \
|
|
__IO uint32_t tmpreg = 0x00U; \
|
|
SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM4EN);\
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM4EN);\
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
#define __HAL_RCC_SPI3_CLK_ENABLE() do { \
|
|
__IO uint32_t tmpreg = 0x00U; \
|
|
SET_BIT(RCC->APB1ENR, RCC_APB1ENR_SPI3EN);\
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_SPI3EN);\
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
#define __HAL_RCC_I2C3_CLK_ENABLE() do { \
|
|
__IO uint32_t tmpreg = 0x00U; \
|
|
SET_BIT(RCC->APB1ENR, RCC_APB1ENR_I2C3EN);\
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_I2C3EN);\
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
#define __HAL_RCC_TIM2_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM2EN))
|
|
#define __HAL_RCC_TIM3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM3EN))
|
|
#define __HAL_RCC_TIM4_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM4EN))
|
|
#define __HAL_RCC_SPI3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_SPI3EN))
|
|
#define __HAL_RCC_I2C3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_I2C3EN))
|
|
#define __HAL_RCC_TIM6_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM6EN))
|
|
#define __HAL_RCC_TIM7_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM7EN))
|
|
#define __HAL_RCC_TIM12_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM12EN))
|
|
#define __HAL_RCC_TIM13_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM13EN))
|
|
#define __HAL_RCC_TIM14_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM14EN))
|
|
#define __HAL_RCC_USART3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_USART3EN))
|
|
#define __HAL_RCC_UART4_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_UART4EN))
|
|
#define __HAL_RCC_UART5_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_UART5EN))
|
|
#define __HAL_RCC_CAN1_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_CAN1EN))
|
|
#define __HAL_RCC_CAN2_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_CAN2EN))
|
|
#define __HAL_RCC_DAC_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_DACEN))
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RCCEx_APB1_Peripheral_Clock_Enable_Disable_Status APB1 Peripheral Clock Enable Disable Status
|
|
* @brief Get the enable or disable status of the APB1 peripheral clock.
|
|
* @note After reset, the peripheral clock (used for registers read/write access)
|
|
* is disabled and the application software has to enable this clock before
|
|
* using it.
|
|
* @{
|
|
*/
|
|
#define __HAL_RCC_TIM2_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM2EN)) != RESET)
|
|
#define __HAL_RCC_TIM3_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM3EN)) != RESET)
|
|
#define __HAL_RCC_TIM4_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM4EN)) != RESET)
|
|
#define __HAL_RCC_SPI3_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_SPI3EN)) != RESET)
|
|
#define __HAL_RCC_I2C3_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_I2C3EN)) != RESET)
|
|
#define __HAL_RCC_TIM6_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM6EN)) != RESET)
|
|
#define __HAL_RCC_TIM7_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM7EN)) != RESET)
|
|
#define __HAL_RCC_TIM12_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM12EN)) != RESET)
|
|
#define __HAL_RCC_TIM13_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM13EN)) != RESET)
|
|
#define __HAL_RCC_TIM14_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM14EN)) != RESET)
|
|
#define __HAL_RCC_USART3_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_USART3EN)) != RESET)
|
|
#define __HAL_RCC_UART4_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_UART4EN)) != RESET)
|
|
#define __HAL_RCC_UART5_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_UART5EN)) != RESET)
|
|
#define __HAL_RCC_CAN1_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_CAN1EN)) != RESET)
|
|
#define __HAL_RCC_CAN2_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_CAN2EN)) != RESET)
|
|
#define __HAL_RCC_DAC_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_DACEN)) != RESET)
|
|
|
|
#define __HAL_RCC_TIM2_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM2EN)) == RESET)
|
|
#define __HAL_RCC_TIM3_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM3EN)) == RESET)
|
|
#define __HAL_RCC_TIM4_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM4EN)) == RESET)
|
|
#define __HAL_RCC_SPI3_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_SPI3EN)) == RESET)
|
|
#define __HAL_RCC_I2C3_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_I2C3EN)) == RESET)
|
|
#define __HAL_RCC_TIM6_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM6EN)) == RESET)
|
|
#define __HAL_RCC_TIM7_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM7EN)) == RESET)
|
|
#define __HAL_RCC_TIM12_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM12EN)) == RESET)
|
|
#define __HAL_RCC_TIM13_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM13EN)) == RESET)
|
|
#define __HAL_RCC_TIM14_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM14EN)) == RESET)
|
|
#define __HAL_RCC_USART3_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_USART3EN)) == RESET)
|
|
#define __HAL_RCC_UART4_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_UART4EN)) == RESET)
|
|
#define __HAL_RCC_UART5_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_UART5EN)) == RESET)
|
|
#define __HAL_RCC_CAN1_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_CAN1EN)) == RESET)
|
|
#define __HAL_RCC_CAN2_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_CAN2EN)) == RESET)
|
|
#define __HAL_RCC_DAC_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_DACEN)) == RESET)
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RCCEx_APB2_Clock_Enable_Disable APB2 Peripheral Clock Enable Disable
|
|
* @brief Enable or disable the High Speed APB (APB2) peripheral clock.
|
|
* @note After reset, the peripheral clock (used for registers read/write access)
|
|
* is disabled and the application software has to enable this clock before
|
|
* using it.
|
|
* @{
|
|
*/
|
|
#define __HAL_RCC_TIM8_CLK_ENABLE() do { \
|
|
__IO uint32_t tmpreg = 0x00U; \
|
|
SET_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM8EN);\
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM8EN);\
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
#define __HAL_RCC_ADC2_CLK_ENABLE() do { \
|
|
__IO uint32_t tmpreg = 0x00U; \
|
|
SET_BIT(RCC->APB2ENR, RCC_APB2ENR_ADC2EN);\
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_ADC2EN);\
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
#define __HAL_RCC_ADC3_CLK_ENABLE() do { \
|
|
__IO uint32_t tmpreg = 0x00U; \
|
|
SET_BIT(RCC->APB2ENR, RCC_APB2ENR_ADC3EN);\
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_ADC3EN);\
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
#define __HAL_RCC_SDIO_CLK_ENABLE() do { \
|
|
__IO uint32_t tmpreg = 0x00U; \
|
|
SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SDIOEN);\
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SDIOEN);\
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
#define __HAL_RCC_SPI4_CLK_ENABLE() do { \
|
|
__IO uint32_t tmpreg = 0x00U; \
|
|
SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI4EN);\
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI4EN);\
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
#define __HAL_RCC_TIM10_CLK_ENABLE() do { \
|
|
__IO uint32_t tmpreg = 0x00U; \
|
|
SET_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM10EN);\
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM10EN);\
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
|
|
#define __HAL_RCC_SDIO_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SDIOEN))
|
|
#define __HAL_RCC_SPI4_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SPI4EN))
|
|
#define __HAL_RCC_TIM10_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_TIM10EN))
|
|
#define __HAL_RCC_TIM8_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_TIM8EN))
|
|
#define __HAL_RCC_ADC2_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_ADC2EN))
|
|
#define __HAL_RCC_ADC3_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_ADC3EN))
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RCCEx_APB2_Peripheral_Clock_Enable_Disable_Status APB2 Peripheral Clock Enable Disable Status
|
|
* @brief Get the enable or disable status of the APB2 peripheral clock.
|
|
* @note After reset, the peripheral clock (used for registers read/write access)
|
|
* is disabled and the application software has to enable this clock before
|
|
* using it.
|
|
* @{
|
|
*/
|
|
#define __HAL_RCC_SDIO_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SDIOEN)) != RESET)
|
|
#define __HAL_RCC_SPI4_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SPI4EN)) != RESET)
|
|
#define __HAL_RCC_TIM10_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM10EN)) != RESET)
|
|
#define __HAL_RCC_TIM8_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM8EN)) != RESET)
|
|
#define __HAL_RCC_ADC2_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_ADC2EN)) != RESET)
|
|
#define __HAL_RCC_ADC3_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_ADC3EN)) != RESET)
|
|
|
|
#define __HAL_RCC_SDIO_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SDIOEN)) == RESET)
|
|
#define __HAL_RCC_SPI4_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SPI4EN)) == RESET)
|
|
#define __HAL_RCC_TIM10_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM10EN)) == RESET)
|
|
#define __HAL_RCC_TIM8_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM8EN)) == RESET)
|
|
#define __HAL_RCC_ADC2_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_ADC2EN)) == RESET)
|
|
#define __HAL_RCC_ADC3_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_ADC3EN)) == RESET)
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RCCEx_AHB1_Force_Release_Reset AHB1 Force Release Reset
|
|
* @brief Force or release AHB1 peripheral reset.
|
|
* @{
|
|
*/
|
|
#define __HAL_RCC_GPIOD_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIODRST))
|
|
#define __HAL_RCC_GPIOE_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOERST))
|
|
#define __HAL_RCC_GPIOF_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOFRST))
|
|
#define __HAL_RCC_GPIOG_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOGRST))
|
|
#define __HAL_RCC_GPIOI_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOIRST))
|
|
#define __HAL_RCC_ETHMAC_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_ETHMACRST))
|
|
#define __HAL_RCC_USB_OTG_HS_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_OTGHRST))
|
|
#define __HAL_RCC_CRC_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_CRCRST))
|
|
|
|
#define __HAL_RCC_GPIOD_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIODRST))
|
|
#define __HAL_RCC_GPIOE_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOERST))
|
|
#define __HAL_RCC_GPIOF_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOFRST))
|
|
#define __HAL_RCC_GPIOG_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOGRST))
|
|
#define __HAL_RCC_GPIOI_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOIRST))
|
|
#define __HAL_RCC_ETHMAC_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_ETHMACRST))
|
|
#define __HAL_RCC_USB_OTG_HS_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_OTGHRST))
|
|
#define __HAL_RCC_CRC_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_CRCRST))
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RCCEx_AHB2_Force_Release_Reset AHB2 Force Release Reset
|
|
* @brief Force or release AHB2 peripheral reset.
|
|
* @{
|
|
*/
|
|
#define __HAL_RCC_AHB2_FORCE_RESET() (RCC->AHB2RSTR = 0xFFFFFFFFU)
|
|
#define __HAL_RCC_AHB2_RELEASE_RESET() (RCC->AHB2RSTR = 0x00U)
|
|
|
|
#if defined(STM32F407xx)|| defined(STM32F417xx)
|
|
#define __HAL_RCC_DCMI_FORCE_RESET() (RCC->AHB2RSTR |= (RCC_AHB2RSTR_DCMIRST))
|
|
#define __HAL_RCC_DCMI_RELEASE_RESET() (RCC->AHB2RSTR &= ~(RCC_AHB2RSTR_DCMIRST))
|
|
#endif /* STM32F407xx || STM32F417xx */
|
|
|
|
#if defined(STM32F415xx) || defined(STM32F417xx)
|
|
#define __HAL_RCC_CRYP_FORCE_RESET() (RCC->AHB2RSTR |= (RCC_AHB2RSTR_CRYPRST))
|
|
#define __HAL_RCC_HASH_FORCE_RESET() (RCC->AHB2RSTR |= (RCC_AHB2RSTR_HASHRST))
|
|
|
|
#define __HAL_RCC_CRYP_RELEASE_RESET() (RCC->AHB2RSTR &= ~(RCC_AHB2RSTR_CRYPRST))
|
|
#define __HAL_RCC_HASH_RELEASE_RESET() (RCC->AHB2RSTR &= ~(RCC_AHB2RSTR_HASHRST))
|
|
#endif /* STM32F415xx || STM32F417xx */
|
|
|
|
#define __HAL_RCC_USB_OTG_FS_FORCE_RESET() (RCC->AHB2RSTR |= (RCC_AHB2RSTR_OTGFSRST))
|
|
#define __HAL_RCC_USB_OTG_FS_RELEASE_RESET() (RCC->AHB2RSTR &= ~(RCC_AHB2RSTR_OTGFSRST))
|
|
|
|
#define __HAL_RCC_RNG_FORCE_RESET() (RCC->AHB2RSTR |= (RCC_AHB2RSTR_RNGRST))
|
|
#define __HAL_RCC_RNG_RELEASE_RESET() (RCC->AHB2RSTR &= ~(RCC_AHB2RSTR_RNGRST))
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RCCEx_AHB3_Force_Release_Reset AHB3 Force Release Reset
|
|
* @brief Force or release AHB3 peripheral reset.
|
|
* @{
|
|
*/
|
|
#define __HAL_RCC_AHB3_FORCE_RESET() (RCC->AHB3RSTR = 0xFFFFFFFFU)
|
|
#define __HAL_RCC_AHB3_RELEASE_RESET() (RCC->AHB3RSTR = 0x00U)
|
|
|
|
#define __HAL_RCC_FSMC_FORCE_RESET() (RCC->AHB3RSTR |= (RCC_AHB3RSTR_FSMCRST))
|
|
#define __HAL_RCC_FSMC_RELEASE_RESET() (RCC->AHB3RSTR &= ~(RCC_AHB3RSTR_FSMCRST))
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RCCEx_APB1_Force_Release_Reset APB1 Force Release Reset
|
|
* @brief Force or release APB1 peripheral reset.
|
|
* @{
|
|
*/
|
|
#define __HAL_RCC_TIM6_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM6RST))
|
|
#define __HAL_RCC_TIM7_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM7RST))
|
|
#define __HAL_RCC_TIM12_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM12RST))
|
|
#define __HAL_RCC_TIM13_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM13RST))
|
|
#define __HAL_RCC_TIM14_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM14RST))
|
|
#define __HAL_RCC_USART3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_USART3RST))
|
|
#define __HAL_RCC_UART4_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_UART4RST))
|
|
#define __HAL_RCC_UART5_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_UART5RST))
|
|
#define __HAL_RCC_CAN1_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_CAN1RST))
|
|
#define __HAL_RCC_CAN2_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_CAN2RST))
|
|
#define __HAL_RCC_DAC_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_DACRST))
|
|
#define __HAL_RCC_TIM2_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM2RST))
|
|
#define __HAL_RCC_TIM3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM3RST))
|
|
#define __HAL_RCC_TIM4_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM4RST))
|
|
#define __HAL_RCC_SPI3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_SPI3RST))
|
|
#define __HAL_RCC_I2C3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_I2C3RST))
|
|
|
|
#define __HAL_RCC_TIM2_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM2RST))
|
|
#define __HAL_RCC_TIM3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM3RST))
|
|
#define __HAL_RCC_TIM4_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM4RST))
|
|
#define __HAL_RCC_SPI3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_SPI3RST))
|
|
#define __HAL_RCC_I2C3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_I2C3RST))
|
|
#define __HAL_RCC_TIM6_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM6RST))
|
|
#define __HAL_RCC_TIM7_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM7RST))
|
|
#define __HAL_RCC_TIM12_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM12RST))
|
|
#define __HAL_RCC_TIM13_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM13RST))
|
|
#define __HAL_RCC_TIM14_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM14RST))
|
|
#define __HAL_RCC_USART3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_USART3RST))
|
|
#define __HAL_RCC_UART4_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_UART4RST))
|
|
#define __HAL_RCC_UART5_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_UART5RST))
|
|
#define __HAL_RCC_CAN1_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_CAN1RST))
|
|
#define __HAL_RCC_CAN2_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_CAN2RST))
|
|
#define __HAL_RCC_DAC_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_DACRST))
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RCCEx_APB2_Force_Release_Reset APB2 Force Release Reset
|
|
* @brief Force or release APB2 peripheral reset.
|
|
* @{
|
|
*/
|
|
#define __HAL_RCC_TIM8_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM8RST))
|
|
#define __HAL_RCC_SDIO_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SDIORST))
|
|
#define __HAL_RCC_SPI4_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SPI4RST))
|
|
#define __HAL_RCC_TIM10_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM10RST))
|
|
|
|
#define __HAL_RCC_SDIO_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SDIORST))
|
|
#define __HAL_RCC_SPI4_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SPI4RST))
|
|
#define __HAL_RCC_TIM10_RELEASE_RESET()(RCC->APB2RSTR &= ~(RCC_APB2RSTR_TIM10RST))
|
|
#define __HAL_RCC_TIM8_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_TIM8RST))
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RCCEx_AHB1_LowPower_Enable_Disable AHB1 Peripheral Low Power Enable Disable
|
|
* @brief Enable or disable the AHB1 peripheral clock during Low Power (Sleep) mode.
|
|
* @note Peripheral clock gating in SLEEP mode can be used to further reduce
|
|
* power consumption.
|
|
* @note After wakeup from SLEEP mode, the peripheral clock is enabled again.
|
|
* @note By default, all peripheral clocks are enabled during SLEEP mode.
|
|
* @{
|
|
*/
|
|
#define __HAL_RCC_GPIOD_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIODLPEN))
|
|
#define __HAL_RCC_GPIOE_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOELPEN))
|
|
#define __HAL_RCC_GPIOF_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOFLPEN))
|
|
#define __HAL_RCC_GPIOG_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOGLPEN))
|
|
#define __HAL_RCC_GPIOI_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOILPEN))
|
|
#define __HAL_RCC_SRAM2_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_SRAM2LPEN))
|
|
#define __HAL_RCC_ETHMAC_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_ETHMACLPEN))
|
|
#define __HAL_RCC_ETHMACTX_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_ETHMACTXLPEN))
|
|
#define __HAL_RCC_ETHMACRX_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_ETHMACRXLPEN))
|
|
#define __HAL_RCC_ETHMACPTP_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_ETHMACPTPLPEN))
|
|
#define __HAL_RCC_USB_OTG_HS_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_OTGHSLPEN))
|
|
#define __HAL_RCC_USB_OTG_HS_ULPI_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_OTGHSULPILPEN))
|
|
#define __HAL_RCC_CRC_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_CRCLPEN))
|
|
#define __HAL_RCC_FLITF_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_FLITFLPEN))
|
|
#define __HAL_RCC_SRAM1_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_SRAM1LPEN))
|
|
#define __HAL_RCC_BKPSRAM_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_BKPSRAMLPEN))
|
|
|
|
#define __HAL_RCC_GPIOD_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIODLPEN))
|
|
#define __HAL_RCC_GPIOE_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOELPEN))
|
|
#define __HAL_RCC_GPIOF_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOFLPEN))
|
|
#define __HAL_RCC_GPIOG_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOGLPEN))
|
|
#define __HAL_RCC_GPIOI_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOILPEN))
|
|
#define __HAL_RCC_SRAM2_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_SRAM2LPEN))
|
|
#define __HAL_RCC_ETHMAC_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_ETHMACLPEN))
|
|
#define __HAL_RCC_ETHMACTX_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_ETHMACTXLPEN))
|
|
#define __HAL_RCC_ETHMACRX_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_ETHMACRXLPEN))
|
|
#define __HAL_RCC_ETHMACPTP_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_ETHMACPTPLPEN))
|
|
#define __HAL_RCC_USB_OTG_HS_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_OTGHSLPEN))
|
|
#define __HAL_RCC_USB_OTG_HS_ULPI_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_OTGHSULPILPEN))
|
|
#define __HAL_RCC_CRC_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_CRCLPEN))
|
|
#define __HAL_RCC_FLITF_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_FLITFLPEN))
|
|
#define __HAL_RCC_SRAM1_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_SRAM1LPEN))
|
|
#define __HAL_RCC_BKPSRAM_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_BKPSRAMLPEN))
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RCCEx_AHB2_LowPower_Enable_Disable AHB2 Peripheral Low Power Enable Disable
|
|
* @brief Enable or disable the AHB2 peripheral clock during Low Power (Sleep) mode.
|
|
* @note Peripheral clock gating in SLEEP mode can be used to further reduce
|
|
* power consumption.
|
|
* @note After wake-up from SLEEP mode, the peripheral clock is enabled again.
|
|
* @note By default, all peripheral clocks are enabled during SLEEP mode.
|
|
* @{
|
|
*/
|
|
#define __HAL_RCC_USB_OTG_FS_CLK_SLEEP_ENABLE() (RCC->AHB2LPENR |= (RCC_AHB2LPENR_OTGFSLPEN))
|
|
#define __HAL_RCC_USB_OTG_FS_CLK_SLEEP_DISABLE() (RCC->AHB2LPENR &= ~(RCC_AHB2LPENR_OTGFSLPEN))
|
|
|
|
#define __HAL_RCC_RNG_CLK_SLEEP_ENABLE() (RCC->AHB2LPENR |= (RCC_AHB2LPENR_RNGLPEN))
|
|
#define __HAL_RCC_RNG_CLK_SLEEP_DISABLE() (RCC->AHB2LPENR &= ~(RCC_AHB2LPENR_RNGLPEN))
|
|
|
|
#if defined(STM32F407xx)|| defined(STM32F417xx)
|
|
#define __HAL_RCC_DCMI_CLK_SLEEP_ENABLE() (RCC->AHB2LPENR |= (RCC_AHB2LPENR_DCMILPEN))
|
|
#define __HAL_RCC_DCMI_CLK_SLEEP_DISABLE() (RCC->AHB2LPENR &= ~(RCC_AHB2LPENR_DCMILPEN))
|
|
#endif /* STM32F407xx || STM32F417xx */
|
|
|
|
#if defined(STM32F415xx) || defined(STM32F417xx)
|
|
#define __HAL_RCC_CRYP_CLK_SLEEP_ENABLE() (RCC->AHB2LPENR |= (RCC_AHB2LPENR_CRYPLPEN))
|
|
#define __HAL_RCC_HASH_CLK_SLEEP_ENABLE() (RCC->AHB2LPENR |= (RCC_AHB2LPENR_HASHLPEN))
|
|
|
|
#define __HAL_RCC_CRYP_CLK_SLEEP_DISABLE() (RCC->AHB2LPENR &= ~(RCC_AHB2LPENR_CRYPLPEN))
|
|
#define __HAL_RCC_HASH_CLK_SLEEP_DISABLE() (RCC->AHB2LPENR &= ~(RCC_AHB2LPENR_HASHLPEN))
|
|
#endif /* STM32F415xx || STM32F417xx */
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RCCEx_AHB3_LowPower_Enable_Disable AHB3 Peripheral Low Power Enable Disable
|
|
* @brief Enable or disable the AHB3 peripheral clock during Low Power (Sleep) mode.
|
|
* @note Peripheral clock gating in SLEEP mode can be used to further reduce
|
|
* power consumption.
|
|
* @note After wakeup from SLEEP mode, the peripheral clock is enabled again.
|
|
* @note By default, all peripheral clocks are enabled during SLEEP mode.
|
|
* @{
|
|
*/
|
|
#define __HAL_RCC_FSMC_CLK_SLEEP_ENABLE() (RCC->AHB3LPENR |= (RCC_AHB3LPENR_FSMCLPEN))
|
|
#define __HAL_RCC_FSMC_CLK_SLEEP_DISABLE() (RCC->AHB3LPENR &= ~(RCC_AHB3LPENR_FSMCLPEN))
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RCCEx_APB1_LowPower_Enable_Disable APB1 Peripheral Low Power Enable Disable
|
|
* @brief Enable or disable the APB1 peripheral clock during Low Power (Sleep) mode.
|
|
* @note Peripheral clock gating in SLEEP mode can be used to further reduce
|
|
* power consumption.
|
|
* @note After wakeup from SLEEP mode, the peripheral clock is enabled again.
|
|
* @note By default, all peripheral clocks are enabled during SLEEP mode.
|
|
* @{
|
|
*/
|
|
#define __HAL_RCC_TIM6_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM6LPEN))
|
|
#define __HAL_RCC_TIM7_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM7LPEN))
|
|
#define __HAL_RCC_TIM12_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM12LPEN))
|
|
#define __HAL_RCC_TIM13_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM13LPEN))
|
|
#define __HAL_RCC_TIM14_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM14LPEN))
|
|
#define __HAL_RCC_USART3_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_USART3LPEN))
|
|
#define __HAL_RCC_UART4_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_UART4LPEN))
|
|
#define __HAL_RCC_UART5_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_UART5LPEN))
|
|
#define __HAL_RCC_CAN1_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_CAN1LPEN))
|
|
#define __HAL_RCC_CAN2_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_CAN2LPEN))
|
|
#define __HAL_RCC_DAC_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_DACLPEN))
|
|
#define __HAL_RCC_TIM2_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM2LPEN))
|
|
#define __HAL_RCC_TIM3_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM3LPEN))
|
|
#define __HAL_RCC_TIM4_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM4LPEN))
|
|
#define __HAL_RCC_SPI3_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_SPI3LPEN))
|
|
#define __HAL_RCC_I2C3_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_I2C3LPEN))
|
|
|
|
#define __HAL_RCC_TIM2_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM2LPEN))
|
|
#define __HAL_RCC_TIM3_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM3LPEN))
|
|
#define __HAL_RCC_TIM4_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM4LPEN))
|
|
#define __HAL_RCC_SPI3_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_SPI3LPEN))
|
|
#define __HAL_RCC_I2C3_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_I2C3LPEN))
|
|
#define __HAL_RCC_TIM6_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM6LPEN))
|
|
#define __HAL_RCC_TIM7_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM7LPEN))
|
|
#define __HAL_RCC_TIM12_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM12LPEN))
|
|
#define __HAL_RCC_TIM13_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM13LPEN))
|
|
#define __HAL_RCC_TIM14_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM14LPEN))
|
|
#define __HAL_RCC_USART3_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_USART3LPEN))
|
|
#define __HAL_RCC_UART4_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_UART4LPEN))
|
|
#define __HAL_RCC_UART5_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_UART5LPEN))
|
|
#define __HAL_RCC_CAN1_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_CAN1LPEN))
|
|
#define __HAL_RCC_CAN2_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_CAN2LPEN))
|
|
#define __HAL_RCC_DAC_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_DACLPEN))
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RCCEx_APB2_LowPower_Enable_Disable APB2 Peripheral Low Power Enable Disable
|
|
* @brief Enable or disable the APB2 peripheral clock during Low Power (Sleep) mode.
|
|
* @note Peripheral clock gating in SLEEP mode can be used to further reduce
|
|
* power consumption.
|
|
* @note After wakeup from SLEEP mode, the peripheral clock is enabled again.
|
|
* @note By default, all peripheral clocks are enabled during SLEEP mode.
|
|
* @{
|
|
*/
|
|
#define __HAL_RCC_TIM8_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_TIM8LPEN))
|
|
#define __HAL_RCC_ADC2_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_ADC2LPEN))
|
|
#define __HAL_RCC_ADC3_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_ADC3LPEN))
|
|
#define __HAL_RCC_SDIO_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_SDIOLPEN))
|
|
#define __HAL_RCC_SPI4_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_SPI4LPEN))
|
|
#define __HAL_RCC_TIM10_CLK_SLEEP_ENABLE()(RCC->APB2LPENR |= (RCC_APB2LPENR_TIM10LPEN))
|
|
|
|
#define __HAL_RCC_SDIO_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_SDIOLPEN))
|
|
#define __HAL_RCC_SPI4_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_SPI4LPEN))
|
|
#define __HAL_RCC_TIM10_CLK_SLEEP_DISABLE()(RCC->APB2LPENR &= ~(RCC_APB2LPENR_TIM10LPEN))
|
|
#define __HAL_RCC_TIM8_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_TIM8LPEN))
|
|
#define __HAL_RCC_ADC2_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_ADC2LPEN))
|
|
#define __HAL_RCC_ADC3_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_ADC3LPEN))
|
|
/**
|
|
* @}
|
|
*/
|
|
#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx */
|
|
/*----------------------------------------------------------------------------*/
|
|
|
|
/*------------------------- STM32F401xE/STM32F401xC --------------------------*/
|
|
#if defined(STM32F401xC) || defined(STM32F401xE)
|
|
/** @defgroup RCCEx_AHB1_Clock_Enable_Disable AHB1 Peripheral Clock Enable Disable
|
|
* @brief Enable or disable the AHB1 peripheral clock.
|
|
* @note After reset, the peripheral clock (used for registers read/write access)
|
|
* is disabled and the application software has to enable this clock before
|
|
* using it.
|
|
* @{
|
|
*/
|
|
#define __HAL_RCC_GPIOD_CLK_ENABLE() do { \
|
|
__IO uint32_t tmpreg = 0x00U; \
|
|
SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIODEN);\
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIODEN);\
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
#define __HAL_RCC_GPIOE_CLK_ENABLE() do { \
|
|
__IO uint32_t tmpreg = 0x00U; \
|
|
SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOEEN);\
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOEEN);\
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
#define __HAL_RCC_CRC_CLK_ENABLE() do { \
|
|
__IO uint32_t tmpreg = 0x00U; \
|
|
SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_CRCEN);\
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_CRCEN);\
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
#define __HAL_RCC_BKPSRAM_CLK_ENABLE() do { \
|
|
__IO uint32_t tmpreg = 0x00U; \
|
|
SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_BKPSRAMEN);\
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_BKPSRAMEN);\
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
#define __HAL_RCC_CCMDATARAMEN_CLK_ENABLE() do { \
|
|
__IO uint32_t tmpreg = 0x00U; \
|
|
SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_CCMDATARAMEN);\
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_CCMDATARAMEN);\
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
|
|
#define __HAL_RCC_GPIOD_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIODEN))
|
|
#define __HAL_RCC_GPIOE_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOEEN))
|
|
#define __HAL_RCC_CRC_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_CRCEN))
|
|
#define __HAL_RCC_BKPSRAM_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_BKPSRAMEN))
|
|
#define __HAL_RCC_CCMDATARAMEN_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_CCMDATARAMEN))
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RCCEx_AHB1_Peripheral_Clock_Enable_Disable_Status AHB1 Peripheral Clock Enable Disable Status
|
|
* @brief Get the enable or disable status of the AHB1 peripheral clock.
|
|
* @note After reset, the peripheral clock (used for registers read/write access)
|
|
* is disabled and the application software has to enable this clock before
|
|
* using it.
|
|
* @{
|
|
*/
|
|
#define __HAL_RCC_GPIOD_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIODEN)) != RESET)
|
|
#define __HAL_RCC_GPIOE_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOEEN)) != RESET)
|
|
#define __HAL_RCC_CRC_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_CRCEN)) != RESET)
|
|
#define __HAL_RCC_BKPSRAM_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_BKPSRAMEN)) != RESET)
|
|
#define __HAL_RCC_CCMDATARAMEN_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_CCMDATARAMEN)) != RESET)
|
|
|
|
#define __HAL_RCC_GPIOD_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIODEN)) == RESET)
|
|
#define __HAL_RCC_GPIOE_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOEEN)) == RESET)
|
|
#define __HAL_RCC_CRC_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_CRCEN)) == RESET)
|
|
#define __HAL_RCC_BKPSRAM_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_BKPSRAMEN)) == RESET)
|
|
#define __HAL_RCC_CCMDATARAMEN_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_CCMDATARAMEN)) == RESET)
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RCCEx_AHB2_Clock_Enable_Disable AHB2 Peripheral Clock Enable Disable
|
|
* @brief Enable or disable the AHB2 peripheral clock.
|
|
* @note After reset, the peripheral clock (used for registers read/write access)
|
|
* is disabled and the application software has to enable this clock before
|
|
* using it.
|
|
* @{
|
|
*/
|
|
#define __HAL_RCC_USB_OTG_FS_CLK_ENABLE() do {(RCC->AHB2ENR |= (RCC_AHB2ENR_OTGFSEN));\
|
|
__HAL_RCC_SYSCFG_CLK_ENABLE();\
|
|
}while(0)
|
|
|
|
#define __HAL_RCC_USB_OTG_FS_CLK_DISABLE() (RCC->AHB2ENR &= ~(RCC_AHB2ENR_OTGFSEN))
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RCCEx_AHB2_Peripheral_Clock_Enable_Disable_Status AHB2 Peripheral Clock Enable Disable Status
|
|
* @brief Get the enable or disable status of the AHB2 peripheral clock.
|
|
* @note After reset, the peripheral clock (used for registers read/write access)
|
|
* is disabled and the application software has to enable this clock before
|
|
* using it.
|
|
* @{
|
|
*/
|
|
#define __HAL_RCC_USB_OTG_FS_IS_CLK_ENABLED() (RCC->AHB2ENR & (RCC_AHB2ENR_OTGFSEN)) != RESET)
|
|
#define __HAL_RCC_USB_OTG_FS_IS_CLK_DISABLED() (RCC->AHB2ENR & (RCC_AHB2ENR_OTGFSEN)) == RESET)
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RCC_APB1_Clock_Enable_Disable APB1 Peripheral Clock Enable Disable
|
|
* @brief Enable or disable the Low Speed APB (APB1) peripheral clock.
|
|
* @note After reset, the peripheral clock (used for registers read/write access)
|
|
* is disabled and the application software has to enable this clock before
|
|
* using it.
|
|
* @{
|
|
*/
|
|
#define __HAL_RCC_TIM2_CLK_ENABLE() do { \
|
|
__IO uint32_t tmpreg = 0x00U; \
|
|
SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM2EN);\
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM2EN);\
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
#define __HAL_RCC_TIM3_CLK_ENABLE() do { \
|
|
__IO uint32_t tmpreg = 0x00U; \
|
|
SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM3EN);\
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM3EN);\
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
#define __HAL_RCC_TIM4_CLK_ENABLE() do { \
|
|
__IO uint32_t tmpreg = 0x00U; \
|
|
SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM4EN);\
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM4EN);\
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
#define __HAL_RCC_SPI3_CLK_ENABLE() do { \
|
|
__IO uint32_t tmpreg = 0x00U; \
|
|
SET_BIT(RCC->APB1ENR, RCC_APB1ENR_SPI3EN);\
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_SPI3EN);\
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
#define __HAL_RCC_I2C3_CLK_ENABLE() do { \
|
|
__IO uint32_t tmpreg = 0x00U; \
|
|
SET_BIT(RCC->APB1ENR, RCC_APB1ENR_I2C3EN);\
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_I2C3EN);\
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
#define __HAL_RCC_TIM2_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM2EN))
|
|
#define __HAL_RCC_TIM3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM3EN))
|
|
#define __HAL_RCC_TIM4_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM4EN))
|
|
#define __HAL_RCC_SPI3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_SPI3EN))
|
|
#define __HAL_RCC_I2C3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_I2C3EN))
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RCCEx_APB1_Peripheral_Clock_Enable_Disable_Status APB1 Peripheral Clock Enable Disable Status
|
|
* @brief Get the enable or disable status of the APB1 peripheral clock.
|
|
* @note After reset, the peripheral clock (used for registers read/write access)
|
|
* is disabled and the application software has to enable this clock before
|
|
* using it.
|
|
* @{
|
|
*/
|
|
#define __HAL_RCC_TIM2_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM2EN)) != RESET)
|
|
#define __HAL_RCC_TIM3_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM3EN)) != RESET)
|
|
#define __HAL_RCC_TIM4_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM4EN)) != RESET)
|
|
#define __HAL_RCC_SPI3_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_SPI3EN)) != RESET)
|
|
#define __HAL_RCC_I2C3_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_I2C3EN)) != RESET)
|
|
|
|
#define __HAL_RCC_TIM2_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM2EN)) == RESET)
|
|
#define __HAL_RCC_TIM3_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM3EN)) == RESET)
|
|
#define __HAL_RCC_TIM4_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM4EN)) == RESET)
|
|
#define __HAL_RCC_SPI3_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_SPI3EN)) == RESET)
|
|
#define __HAL_RCC_I2C3_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_I2C3EN)) == RESET)
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RCCEx_APB2_Clock_Enable_Disable APB2 Peripheral Clock Enable Disable
|
|
* @brief Enable or disable the High Speed APB (APB2) peripheral clock.
|
|
* @note After reset, the peripheral clock (used for registers read/write access)
|
|
* is disabled and the application software has to enable this clock before
|
|
* using it.
|
|
* @{
|
|
*/
|
|
#define __HAL_RCC_SDIO_CLK_ENABLE() do { \
|
|
__IO uint32_t tmpreg = 0x00U; \
|
|
SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SDIOEN);\
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SDIOEN);\
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
#define __HAL_RCC_SPI4_CLK_ENABLE() do { \
|
|
__IO uint32_t tmpreg = 0x00U; \
|
|
SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI4EN);\
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI4EN);\
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
#define __HAL_RCC_TIM10_CLK_ENABLE() do { \
|
|
__IO uint32_t tmpreg = 0x00U; \
|
|
SET_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM10EN);\
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM10EN);\
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
|
|
#define __HAL_RCC_SDIO_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SDIOEN))
|
|
#define __HAL_RCC_SPI4_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SPI4EN))
|
|
#define __HAL_RCC_TIM10_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_TIM10EN))
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RCCEx_APB2_Peripheral_Clock_Enable_Disable_Status APB2 Peripheral Clock Enable Disable Status
|
|
* @brief Get the enable or disable status of the APB2 peripheral clock.
|
|
* @note After reset, the peripheral clock (used for registers read/write access)
|
|
* is disabled and the application software has to enable this clock before
|
|
* using it.
|
|
* @{
|
|
*/
|
|
#define __HAL_RCC_SDIO_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SDIOEN)) == RESET)
|
|
#define __HAL_RCC_SPI4_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SPI4EN)) == RESET)
|
|
#define __HAL_RCC_TIM10_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM10EN)) == RESET)
|
|
/**
|
|
* @}
|
|
*/
|
|
/** @defgroup RCCEx_AHB1_Force_Release_Reset AHB1 Force Release Reset
|
|
* @brief Force or release AHB1 peripheral reset.
|
|
* @{
|
|
*/
|
|
#define __HAL_RCC_AHB1_FORCE_RESET() (RCC->AHB1RSTR = 0xFFFFFFFFU)
|
|
#define __HAL_RCC_GPIOD_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIODRST))
|
|
#define __HAL_RCC_GPIOE_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOERST))
|
|
#define __HAL_RCC_CRC_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_CRCRST))
|
|
|
|
#define __HAL_RCC_AHB1_RELEASE_RESET() (RCC->AHB1RSTR = 0x00U)
|
|
#define __HAL_RCC_GPIOD_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIODRST))
|
|
#define __HAL_RCC_GPIOE_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOERST))
|
|
#define __HAL_RCC_CRC_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_CRCRST))
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RCCEx_AHB2_Force_Release_Reset AHB2 Force Release Reset
|
|
* @brief Force or release AHB2 peripheral reset.
|
|
* @{
|
|
*/
|
|
#define __HAL_RCC_AHB2_FORCE_RESET() (RCC->AHB2RSTR = 0xFFFFFFFFU)
|
|
#define __HAL_RCC_USB_OTG_FS_FORCE_RESET() (RCC->AHB2RSTR |= (RCC_AHB2RSTR_OTGFSRST))
|
|
|
|
#define __HAL_RCC_AHB2_RELEASE_RESET() (RCC->AHB2RSTR = 0x00U)
|
|
#define __HAL_RCC_USB_OTG_FS_RELEASE_RESET() (RCC->AHB2RSTR &= ~(RCC_AHB2RSTR_OTGFSRST))
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RCCEx_APB1_Force_Release_Reset APB1 Force Release Reset
|
|
* @brief Force or release APB1 peripheral reset.
|
|
* @{
|
|
*/
|
|
#define __HAL_RCC_APB1_FORCE_RESET() (RCC->APB1RSTR = 0xFFFFFFFFU)
|
|
#define __HAL_RCC_TIM2_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM2RST))
|
|
#define __HAL_RCC_TIM3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM3RST))
|
|
#define __HAL_RCC_TIM4_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM4RST))
|
|
#define __HAL_RCC_SPI3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_SPI3RST))
|
|
#define __HAL_RCC_I2C3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_I2C3RST))
|
|
|
|
#define __HAL_RCC_APB1_RELEASE_RESET() (RCC->APB1RSTR = 0x00U)
|
|
#define __HAL_RCC_TIM2_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM2RST))
|
|
#define __HAL_RCC_TIM3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM3RST))
|
|
#define __HAL_RCC_TIM4_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM4RST))
|
|
#define __HAL_RCC_SPI3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_SPI3RST))
|
|
#define __HAL_RCC_I2C3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_I2C3RST))
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RCCEx_APB2_Force_Release_Reset APB2 Force Release Reset
|
|
* @brief Force or release APB2 peripheral reset.
|
|
* @{
|
|
*/
|
|
#define __HAL_RCC_APB2_FORCE_RESET() (RCC->APB2RSTR = 0xFFFFFFFFU)
|
|
#define __HAL_RCC_SDIO_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SDIORST))
|
|
#define __HAL_RCC_SPI4_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SPI4RST))
|
|
#define __HAL_RCC_TIM10_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM10RST))
|
|
|
|
#define __HAL_RCC_APB2_RELEASE_RESET() (RCC->APB2RSTR = 0x00U)
|
|
#define __HAL_RCC_SDIO_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SDIORST))
|
|
#define __HAL_RCC_SPI4_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SPI4RST))
|
|
#define __HAL_RCC_TIM10_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_TIM10RST))
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RCCEx_AHB3_Force_Release_Reset AHB3 Force Release Reset
|
|
* @brief Force or release AHB3 peripheral reset.
|
|
* @{
|
|
*/
|
|
#define __HAL_RCC_AHB3_FORCE_RESET() (RCC->AHB3RSTR = 0xFFFFFFFFU)
|
|
#define __HAL_RCC_AHB3_RELEASE_RESET() (RCC->AHB3RSTR = 0x00U)
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RCCEx_AHB1_LowPower_Enable_Disable AHB1 Peripheral Low Power Enable Disable
|
|
* @brief Enable or disable the AHB1 peripheral clock during Low Power (Sleep) mode.
|
|
* @note Peripheral clock gating in SLEEP mode can be used to further reduce
|
|
* power consumption.
|
|
* @note After wake-up from SLEEP mode, the peripheral clock is enabled again.
|
|
* @note By default, all peripheral clocks are enabled during SLEEP mode.
|
|
* @{
|
|
*/
|
|
#define __HAL_RCC_GPIOD_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIODLPEN))
|
|
#define __HAL_RCC_GPIOE_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOELPEN))
|
|
#define __HAL_RCC_CRC_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_CRCLPEN))
|
|
#define __HAL_RCC_FLITF_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_FLITFLPEN))
|
|
#define __HAL_RCC_SRAM1_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_SRAM1LPEN))
|
|
#define __HAL_RCC_BKPSRAM_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_BKPSRAMLPEN))
|
|
|
|
#define __HAL_RCC_GPIOD_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIODLPEN))
|
|
#define __HAL_RCC_GPIOE_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOELPEN))
|
|
#define __HAL_RCC_CRC_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_CRCLPEN))
|
|
#define __HAL_RCC_FLITF_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_FLITFLPEN))
|
|
#define __HAL_RCC_SRAM1_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_SRAM1LPEN))
|
|
#define __HAL_RCC_BKPSRAM_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_BKPSRAMLPEN))
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RCCEx_AHB2_LowPower_Enable_Disable AHB2 Peripheral Low Power Enable Disable
|
|
* @brief Enable or disable the AHB2 peripheral clock during Low Power (Sleep) mode.
|
|
* @note Peripheral clock gating in SLEEP mode can be used to further reduce
|
|
* power consumption.
|
|
* @note After wake-up from SLEEP mode, the peripheral clock is enabled again.
|
|
* @note By default, all peripheral clocks are enabled during SLEEP mode.
|
|
* @{
|
|
*/
|
|
#define __HAL_RCC_USB_OTG_FS_CLK_SLEEP_ENABLE() (RCC->AHB2LPENR |= (RCC_AHB2LPENR_OTGFSLPEN))
|
|
|
|
#define __HAL_RCC_USB_OTG_FS_CLK_SLEEP_DISABLE() (RCC->AHB2LPENR &= ~(RCC_AHB2LPENR_OTGFSLPEN))
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RCCEx_APB1_LowPower_Enable_Disable APB1 Peripheral Low Power Enable Disable
|
|
* @brief Enable or disable the APB1 peripheral clock during Low Power (Sleep) mode.
|
|
* @note Peripheral clock gating in SLEEP mode can be used to further reduce
|
|
* power consumption.
|
|
* @note After wake-up from SLEEP mode, the peripheral clock is enabled again.
|
|
* @note By default, all peripheral clocks are enabled during SLEEP mode.
|
|
* @{
|
|
*/
|
|
#define __HAL_RCC_TIM2_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM2LPEN))
|
|
#define __HAL_RCC_TIM3_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM3LPEN))
|
|
#define __HAL_RCC_TIM4_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM4LPEN))
|
|
#define __HAL_RCC_SPI3_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_SPI3LPEN))
|
|
#define __HAL_RCC_I2C3_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_I2C3LPEN))
|
|
|
|
#define __HAL_RCC_TIM2_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM2LPEN))
|
|
#define __HAL_RCC_TIM3_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM3LPEN))
|
|
#define __HAL_RCC_TIM4_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM4LPEN))
|
|
#define __HAL_RCC_SPI3_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_SPI3LPEN))
|
|
#define __HAL_RCC_I2C3_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_I2C3LPEN))
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RCCEx_APB2_LowPower_Enable_Disable APB2 Peripheral Low Power Enable Disable
|
|
* @brief Enable or disable the APB2 peripheral clock during Low Power (Sleep) mode.
|
|
* @note Peripheral clock gating in SLEEP mode can be used to further reduce
|
|
* power consumption.
|
|
* @note After wake-up from SLEEP mode, the peripheral clock is enabled again.
|
|
* @note By default, all peripheral clocks are enabled during SLEEP mode.
|
|
* @{
|
|
*/
|
|
#define __HAL_RCC_SDIO_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_SDIOLPEN))
|
|
#define __HAL_RCC_SPI4_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_SPI4LPEN))
|
|
#define __HAL_RCC_TIM10_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_TIM10LPEN))
|
|
|
|
#define __HAL_RCC_SDIO_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_SDIOLPEN))
|
|
#define __HAL_RCC_SPI4_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_SPI4LPEN))
|
|
#define __HAL_RCC_TIM10_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_TIM10LPEN))
|
|
/**
|
|
* @}
|
|
*/
|
|
#endif /* STM32F401xC || STM32F401xE*/
|
|
/*----------------------------------------------------------------------------*/
|
|
|
|
/*-------------------------------- STM32F410xx -------------------------------*/
|
|
#if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx)
|
|
/** @defgroup RCCEx_AHB1_Clock_Enable_Disable AHB1 Peripheral Clock Enable Disable
|
|
* @brief Enables or disables the AHB1 peripheral clock.
|
|
* @note After reset, the peripheral clock (used for registers read/write access)
|
|
* is disabled and the application software has to enable this clock before
|
|
* using it.
|
|
* @{
|
|
*/
|
|
#define __HAL_RCC_CRC_CLK_ENABLE() do { \
|
|
__IO uint32_t tmpreg = 0x00U; \
|
|
SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_CRCEN);\
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_CRCEN);\
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
#define __HAL_RCC_RNG_CLK_ENABLE() do { \
|
|
__IO uint32_t tmpreg = 0x00U; \
|
|
SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_RNGEN);\
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_RNGEN);\
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
#define __HAL_RCC_CRC_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_CRCEN))
|
|
#define __HAL_RCC_RNG_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_RNGEN))
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RCCEx_AHB1_Peripheral_Clock_Enable_Disable_Status AHB1 Peripheral Clock Enable Disable Status
|
|
* @brief Get the enable or disable status of the AHB1 peripheral clock.
|
|
* @note After reset, the peripheral clock (used for registers read/write access)
|
|
* is disabled and the application software has to enable this clock before
|
|
* using it.
|
|
* @{
|
|
*/
|
|
#define __HAL_RCC_CRC_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_CRCEN)) == RESET)
|
|
#define __HAL_RCC_RNG_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_RNGEN)) == RESET)
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RCCEx_APB1_Clock_Enable_Disable APB1 Peripheral Clock Enable Disable
|
|
* @brief Enable or disable the High Speed APB (APB1) peripheral clock.
|
|
* @{
|
|
*/
|
|
#define __HAL_RCC_TIM6_CLK_ENABLE() do { \
|
|
__IO uint32_t tmpreg = 0x00U; \
|
|
SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM6EN);\
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM6EN);\
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
#define __HAL_RCC_LPTIM1_CLK_ENABLE() do { \
|
|
__IO uint32_t tmpreg = 0x00U; \
|
|
SET_BIT(RCC->APB1ENR, RCC_APB1ENR_LPTIM1EN);\
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_LPTIM1EN);\
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
#define __HAL_RCC_RTCAPB_CLK_ENABLE() do { \
|
|
__IO uint32_t tmpreg = 0x00U; \
|
|
SET_BIT(RCC->APB1ENR, RCC_APB1ENR_RTCAPBEN);\
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_RTCAPBEN);\
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
#define __HAL_RCC_FMPI2C1_CLK_ENABLE() do { \
|
|
__IO uint32_t tmpreg = 0x00U; \
|
|
SET_BIT(RCC->APB1ENR, RCC_APB1ENR_FMPI2C1EN);\
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_FMPI2C1EN);\
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
#define __HAL_RCC_DAC_CLK_ENABLE() do { \
|
|
__IO uint32_t tmpreg = 0x00U; \
|
|
SET_BIT(RCC->APB1ENR, RCC_APB1ENR_DACEN);\
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_DACEN);\
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
|
|
#define __HAL_RCC_TIM6_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM6EN))
|
|
#define __HAL_RCC_RTCAPB_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_RTCAPBEN))
|
|
#define __HAL_RCC_LPTIM1_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_LPTIM1EN))
|
|
#define __HAL_RCC_FMPI2C1_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_FMPI2C1EN))
|
|
#define __HAL_RCC_DAC_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_DACEN))
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RCCEx_APB1_Peripheral_Clock_Enable_Disable_Status APB1 Peripheral Clock Enable Disable Status
|
|
* @brief Get the enable or disable status of the APB1 peripheral clock.
|
|
* @note After reset, the peripheral clock (used for registers read/write access)
|
|
* is disabled and the application software has to enable this clock before
|
|
* using it.
|
|
* @{
|
|
*/
|
|
#define __HAL_RCC_TIM6_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM6EN)) != RESET)
|
|
#define __HAL_RCC_RTCAPB_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_RTCAPBEN)) != RESET)
|
|
#define __HAL_RCC_LPTIM1_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_LPTIM1EN)) != RESET)
|
|
#define __HAL_RCC_FMPI2C1_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_FMPI2C1EN)) != RESET)
|
|
#define __HAL_RCC_DAC_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_DACEN)) != RESET)
|
|
|
|
#define __HAL_RCC_TIM6_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM6EN)) == RESET)
|
|
#define __HAL_RCC_RTCAPB_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_RTCAPBEN)) == RESET)
|
|
#define __HAL_RCC_LPTIM1_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_LPTIM1EN)) == RESET)
|
|
#define __HAL_RCC_FMPI2C1_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_FMPI2C1EN)) == RESET)
|
|
#define __HAL_RCC_DAC_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_DACEN)) == RESET)
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RCCEx_APB2_Clock_Enable_Disable APB2 Peripheral Clock Enable Disable
|
|
* @brief Enable or disable the High Speed APB (APB2) peripheral clock.
|
|
* @{
|
|
*/
|
|
#define __HAL_RCC_SPI5_CLK_ENABLE() do { \
|
|
__IO uint32_t tmpreg = 0x00U; \
|
|
SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI5EN);\
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI5EN);\
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
#define __HAL_RCC_EXTIT_CLK_ENABLE() do { \
|
|
__IO uint32_t tmpreg = 0x00U; \
|
|
SET_BIT(RCC->APB2ENR, RCC_APB2ENR_EXTITEN);\
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_EXTITEN);\
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
#define __HAL_RCC_SPI5_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SPI5EN))
|
|
#define __HAL_RCC_EXTIT_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_EXTITEN))
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RCCEx_APB2_Peripheral_Clock_Enable_Disable_Status APB2 Peripheral Clock Enable Disable Status
|
|
* @brief Get the enable or disable status of the APB2 peripheral clock.
|
|
* @note After reset, the peripheral clock (used for registers read/write access)
|
|
* is disabled and the application software has to enable this clock before
|
|
* using it.
|
|
* @{
|
|
*/
|
|
#define __HAL_RCC_SPI5_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SPI5EN)) != RESET)
|
|
#define __HAL_RCC_EXTIT_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_EXTITEN)) != RESET)
|
|
|
|
#define __HAL_RCC_SPI5_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SPI5EN)) == RESET)
|
|
#define __HAL_RCC_EXTIT_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_EXTITEN)) == RESET)
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RCCEx_AHB1_Force_Release_Reset AHB1 Force Release Reset
|
|
* @brief Force or release AHB1 peripheral reset.
|
|
* @{
|
|
*/
|
|
#define __HAL_RCC_CRC_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_CRCRST))
|
|
#define __HAL_RCC_RNG_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_RNGRST))
|
|
#define __HAL_RCC_CRC_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_CRCRST))
|
|
#define __HAL_RCC_RNG_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_RNGRST))
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RCCEx_AHB2_Force_Release_Reset AHB2 Force Release Reset
|
|
* @brief Force or release AHB2 peripheral reset.
|
|
* @{
|
|
*/
|
|
#define __HAL_RCC_AHB2_FORCE_RESET()
|
|
#define __HAL_RCC_AHB2_RELEASE_RESET()
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RCCEx_AHB3_Force_Release_Reset AHB3 Force Release Reset
|
|
* @brief Force or release AHB3 peripheral reset.
|
|
* @{
|
|
*/
|
|
#define __HAL_RCC_AHB3_FORCE_RESET()
|
|
#define __HAL_RCC_AHB3_RELEASE_RESET()
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RCCEx_APB1_Force_Release_Reset APB1 Force Release Reset
|
|
* @brief Force or release APB1 peripheral reset.
|
|
* @{
|
|
*/
|
|
#define __HAL_RCC_TIM6_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM6RST))
|
|
#define __HAL_RCC_LPTIM1_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_LPTIM1RST))
|
|
#define __HAL_RCC_FMPI2C1_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_FMPI2C1RST))
|
|
#define __HAL_RCC_DAC_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_DACRST))
|
|
|
|
#define __HAL_RCC_TIM6_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM6RST))
|
|
#define __HAL_RCC_LPTIM1_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_LPTIM1RST))
|
|
#define __HAL_RCC_FMPI2C1_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_FMPI2C1RST))
|
|
#define __HAL_RCC_DAC_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_DACRST))
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RCCEx_APB2_Force_Release_Reset APB2 Force Release Reset
|
|
* @brief Force or release APB2 peripheral reset.
|
|
* @{
|
|
*/
|
|
#define __HAL_RCC_SPI5_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SPI5RST))
|
|
#define __HAL_RCC_SPI5_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SPI5RST))
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RCCEx_AHB1_LowPower_Enable_Disable AHB1 Peripheral Low Power Enable Disable
|
|
* @brief Enable or disable the AHB1 peripheral clock during Low Power (Sleep) mode.
|
|
* @note Peripheral clock gating in SLEEP mode can be used to further reduce
|
|
* power consumption.
|
|
* @note After wakeup from SLEEP mode, the peripheral clock is enabled again.
|
|
* @note By default, all peripheral clocks are enabled during SLEEP mode.
|
|
* @{
|
|
*/
|
|
#define __HAL_RCC_RNG_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_RNGLPEN))
|
|
#define __HAL_RCC_CRC_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_CRCLPEN))
|
|
#define __HAL_RCC_FLITF_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_FLITFLPEN))
|
|
#define __HAL_RCC_SRAM1_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_SRAM1LPEN))
|
|
|
|
#define __HAL_RCC_RNG_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_RNGLPEN))
|
|
#define __HAL_RCC_CRC_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_CRCLPEN))
|
|
#define __HAL_RCC_FLITF_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_FLITFLPEN))
|
|
#define __HAL_RCC_SRAM1_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_SRAM1LPEN))
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RCCEx_APB1_LowPower_Enable_Disable APB1 Peripheral Low Power Enable Disable
|
|
* @brief Enable or disable the APB1 peripheral clock during Low Power (Sleep) mode.
|
|
* @{
|
|
*/
|
|
#define __HAL_RCC_TIM6_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM6LPEN))
|
|
#define __HAL_RCC_LPTIM1_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_LPTIM1LPEN))
|
|
#define __HAL_RCC_RTCAPB_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_RTCAPBLPEN))
|
|
#define __HAL_RCC_FMPI2C1_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_FMPI2C1LPEN))
|
|
#define __HAL_RCC_DAC_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_DACLPEN))
|
|
|
|
#define __HAL_RCC_TIM6_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM6LPEN))
|
|
#define __HAL_RCC_LPTIM1_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_LPTIM1LPEN))
|
|
#define __HAL_RCC_RTCAPB_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_RTCAPBLPEN))
|
|
#define __HAL_RCC_FMPI2C1_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_FMPI2C1LPEN))
|
|
#define __HAL_RCC_DAC_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_DACLPEN))
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RCCEx_APB2_LowPower_Enable_Disable APB2 Peripheral Low Power Enable Disable
|
|
* @brief Enable or disable the APB2 peripheral clock during Low Power (Sleep) mode.
|
|
* @{
|
|
*/
|
|
#define __HAL_RCC_SPI5_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_SPI5LPEN))
|
|
#define __HAL_RCC_EXTIT_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_EXTITLPEN))
|
|
#define __HAL_RCC_SPI5_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_SPI5LPEN))
|
|
#define __HAL_RCC_EXTIT_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_EXTITLPEN))
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
#endif /* STM32F410Tx || STM32F410Cx || STM32F410Rx */
|
|
/*----------------------------------------------------------------------------*/
|
|
|
|
/*-------------------------------- STM32F411xx -------------------------------*/
|
|
#if defined(STM32F411xE)
|
|
/** @defgroup RCCEx_AHB1_Clock_Enable_Disable AHB1 Peripheral Clock Enable Disable
|
|
* @brief Enables or disables the AHB1 peripheral clock.
|
|
* @note After reset, the peripheral clock (used for registers read/write access)
|
|
* is disabled and the application software has to enable this clock before
|
|
* using it.
|
|
* @{
|
|
*/
|
|
#define __HAL_RCC_BKPSRAM_CLK_ENABLE() do { \
|
|
__IO uint32_t tmpreg = 0x00U; \
|
|
SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_BKPSRAMEN);\
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_BKPSRAMEN);\
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
#define __HAL_RCC_CCMDATARAMEN_CLK_ENABLE() do { \
|
|
__IO uint32_t tmpreg = 0x00U; \
|
|
SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_CCMDATARAMEN);\
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_CCMDATARAMEN);\
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
#define __HAL_RCC_GPIOD_CLK_ENABLE() do { \
|
|
__IO uint32_t tmpreg = 0x00U; \
|
|
SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIODEN);\
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIODEN);\
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
#define __HAL_RCC_GPIOE_CLK_ENABLE() do { \
|
|
__IO uint32_t tmpreg = 0x00U; \
|
|
SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOEEN);\
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOEEN);\
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
#define __HAL_RCC_CRC_CLK_ENABLE() do { \
|
|
__IO uint32_t tmpreg = 0x00U; \
|
|
SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_CRCEN);\
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_CRCEN);\
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
#define __HAL_RCC_GPIOD_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIODEN))
|
|
#define __HAL_RCC_GPIOE_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOEEN))
|
|
#define __HAL_RCC_BKPSRAM_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_BKPSRAMEN))
|
|
#define __HAL_RCC_CCMDATARAMEN_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_CCMDATARAMEN))
|
|
#define __HAL_RCC_CRC_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_CRCEN))
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RCCEx_AHB1_Peripheral_Clock_Enable_Disable_Status AHB1 Peripheral Clock Enable Disable Status
|
|
* @brief Get the enable or disable status of the AHB1 peripheral clock.
|
|
* @note After reset, the peripheral clock (used for registers read/write access)
|
|
* is disabled and the application software has to enable this clock before
|
|
* using it.
|
|
* @{
|
|
*/
|
|
#define __HAL_RCC_GPIOD_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIODEN)) != RESET)
|
|
#define __HAL_RCC_GPIOE_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOEEN)) != RESET)
|
|
#define __HAL_RCC_BKPSRAM_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_BKPSRAMEN)) != RESET)
|
|
#define __HAL_RCC_CCMDATARAMEN_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_CCMDATARAMEN)) != RESET)
|
|
#define __HAL_RCC_CRC_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_CRCEN)) != RESET)
|
|
|
|
#define __HAL_RCC_GPIOD_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIODEN)) == RESET)
|
|
#define __HAL_RCC_GPIOE_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOEEN)) == RESET)
|
|
#define __HAL_RCC_BKPSRAM_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_BKPSRAMEN)) == RESET)
|
|
#define __HAL_RCC_CCMDATARAMEN_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_CCMDATARAMEN)) == RESET)
|
|
#define __HAL_RCC_CRC_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_CRCEN)) == RESET)
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RCCEX_AHB2_Clock_Enable_Disable AHB2 Peripheral Clock Enable Disable
|
|
* @brief Enable or disable the AHB2 peripheral clock.
|
|
* @note After reset, the peripheral clock (used for registers read/write access)
|
|
* is disabled and the application software has to enable this clock before
|
|
* using it.
|
|
* @{
|
|
*/
|
|
#define __HAL_RCC_USB_OTG_FS_CLK_ENABLE() do {(RCC->AHB2ENR |= (RCC_AHB2ENR_OTGFSEN));\
|
|
__HAL_RCC_SYSCFG_CLK_ENABLE();\
|
|
}while(0)
|
|
|
|
#define __HAL_RCC_USB_OTG_FS_CLK_DISABLE() (RCC->AHB2ENR &= ~(RCC_AHB2ENR_OTGFSEN))
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RCCEx_AHB2_Peripheral_Clock_Enable_Disable_Status AHB2 Peripheral Clock Enable Disable Status
|
|
* @brief Get the enable or disable status of the AHB2 peripheral clock.
|
|
* @note After reset, the peripheral clock (used for registers read/write access)
|
|
* is disabled and the application software has to enable this clock before
|
|
* using it.
|
|
* @{
|
|
*/
|
|
#define __HAL_RCC_USB_OTG_FS_IS_CLK_ENABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_OTGFSEN)) != RESET)
|
|
#define __HAL_RCC_USB_OTG_FS_IS_CLK_DISABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_OTGFSEN)) == RESET)
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RCCEx_APB1_Clock_Enable_Disable APB1 Peripheral Clock Enable Disable
|
|
* @brief Enable or disable the Low Speed APB (APB1) peripheral clock.
|
|
* @note After reset, the peripheral clock (used for registers read/write access)
|
|
* is disabled and the application software has to enable this clock before
|
|
* using it.
|
|
* @{
|
|
*/
|
|
#define __HAL_RCC_TIM2_CLK_ENABLE() do { \
|
|
__IO uint32_t tmpreg = 0x00U; \
|
|
SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM2EN);\
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM2EN);\
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
#define __HAL_RCC_TIM3_CLK_ENABLE() do { \
|
|
__IO uint32_t tmpreg = 0x00U; \
|
|
SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM3EN);\
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM3EN);\
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
#define __HAL_RCC_TIM4_CLK_ENABLE() do { \
|
|
__IO uint32_t tmpreg = 0x00U; \
|
|
SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM4EN);\
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM4EN);\
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
#define __HAL_RCC_SPI3_CLK_ENABLE() do { \
|
|
__IO uint32_t tmpreg = 0x00U; \
|
|
SET_BIT(RCC->APB1ENR, RCC_APB1ENR_SPI3EN);\
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_SPI3EN);\
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
#define __HAL_RCC_I2C3_CLK_ENABLE() do { \
|
|
__IO uint32_t tmpreg = 0x00U; \
|
|
SET_BIT(RCC->APB1ENR, RCC_APB1ENR_I2C3EN);\
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_I2C3EN);\
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
#define __HAL_RCC_TIM2_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM2EN))
|
|
#define __HAL_RCC_TIM3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM3EN))
|
|
#define __HAL_RCC_TIM4_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM4EN))
|
|
#define __HAL_RCC_SPI3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_SPI3EN))
|
|
#define __HAL_RCC_I2C3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_I2C3EN))
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RCCEx_APB1_Peripheral_Clock_Enable_Disable_Status APB1 Peripheral Clock Enable Disable Status
|
|
* @brief Get the enable or disable status of the APB1 peripheral clock.
|
|
* @note After reset, the peripheral clock (used for registers read/write access)
|
|
* is disabled and the application software has to enable this clock before
|
|
* using it.
|
|
* @{
|
|
*/
|
|
#define __HAL_RCC_TIM2_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM2EN)) != RESET)
|
|
#define __HAL_RCC_TIM3_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM3EN)) != RESET)
|
|
#define __HAL_RCC_TIM4_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM4EN)) != RESET)
|
|
#define __HAL_RCC_SPI3_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_SPI3EN)) != RESET)
|
|
#define __HAL_RCC_I2C3_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_I2C3EN)) != RESET)
|
|
|
|
#define __HAL_RCC_TIM2_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM2EN)) == RESET)
|
|
#define __HAL_RCC_TIM3_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM3EN)) == RESET)
|
|
#define __HAL_RCC_TIM4_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM4EN)) == RESET)
|
|
#define __HAL_RCC_SPI3_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_SPI3EN)) == RESET)
|
|
#define __HAL_RCC_I2C3_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_I2C3EN)) == RESET)
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RCCEx_APB2_Clock_Enable_Disable APB2 Peripheral Clock Enable Disable
|
|
* @brief Enable or disable the High Speed APB (APB2) peripheral clock.
|
|
* @{
|
|
*/
|
|
#define __HAL_RCC_SPI5_CLK_ENABLE() do { \
|
|
__IO uint32_t tmpreg = 0x00U; \
|
|
SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI5EN);\
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI5EN);\
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
#define __HAL_RCC_SDIO_CLK_ENABLE() do { \
|
|
__IO uint32_t tmpreg = 0x00U; \
|
|
SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SDIOEN);\
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SDIOEN);\
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
#define __HAL_RCC_SPI4_CLK_ENABLE() do { \
|
|
__IO uint32_t tmpreg = 0x00U; \
|
|
SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI4EN);\
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI4EN);\
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
#define __HAL_RCC_TIM10_CLK_ENABLE() do { \
|
|
__IO uint32_t tmpreg = 0x00U; \
|
|
SET_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM10EN);\
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM10EN);\
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
#define __HAL_RCC_SDIO_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SDIOEN))
|
|
#define __HAL_RCC_SPI4_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SPI4EN))
|
|
#define __HAL_RCC_TIM10_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_TIM10EN))
|
|
#define __HAL_RCC_SPI5_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SPI5EN))
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RCCEx_APB2_Peripheral_Clock_Enable_Disable_Status APB2 Peripheral Clock Enable Disable Status
|
|
* @brief Get the enable or disable status of the APB2 peripheral clock.
|
|
* @note After reset, the peripheral clock (used for registers read/write access)
|
|
* is disabled and the application software has to enable this clock before
|
|
* using it.
|
|
* @{
|
|
*/
|
|
#define __HAL_RCC_SDIO_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SDIOEN)) != RESET)
|
|
#define __HAL_RCC_SPI4_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SPI4EN)) != RESET)
|
|
#define __HAL_RCC_TIM10_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM10EN)) != RESET)
|
|
#define __HAL_RCC_SPI5_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SPI5EN)) != RESET)
|
|
|
|
#define __HAL_RCC_SDIO_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SDIOEN)) == RESET)
|
|
#define __HAL_RCC_SPI4_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SPI4EN)) == RESET)
|
|
#define __HAL_RCC_TIM10_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM10EN)) == RESET)
|
|
#define __HAL_RCC_SPI5_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SPI5EN)) == RESET)
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RCCEx_AHB1_Force_Release_Reset AHB1 Force Release Reset
|
|
* @brief Force or release AHB1 peripheral reset.
|
|
* @{
|
|
*/
|
|
#define __HAL_RCC_GPIOD_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIODRST))
|
|
#define __HAL_RCC_GPIOE_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOERST))
|
|
#define __HAL_RCC_CRC_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_CRCRST))
|
|
|
|
#define __HAL_RCC_GPIOD_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIODRST))
|
|
#define __HAL_RCC_GPIOE_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOERST))
|
|
#define __HAL_RCC_CRC_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_CRCRST))
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RCCEx_AHB2_Force_Release_Reset AHB2 Force Release Reset
|
|
* @brief Force or release AHB2 peripheral reset.
|
|
* @{
|
|
*/
|
|
#define __HAL_RCC_AHB2_FORCE_RESET() (RCC->AHB2RSTR = 0xFFFFFFFFU)
|
|
#define __HAL_RCC_USB_OTG_FS_FORCE_RESET() (RCC->AHB2RSTR |= (RCC_AHB2RSTR_OTGFSRST))
|
|
|
|
#define __HAL_RCC_AHB2_RELEASE_RESET() (RCC->AHB2RSTR = 0x00U)
|
|
#define __HAL_RCC_USB_OTG_FS_RELEASE_RESET() (RCC->AHB2RSTR &= ~(RCC_AHB2RSTR_OTGFSRST))
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RCCEx_AHB3_Force_Release_Reset AHB3 Force Release Reset
|
|
* @brief Force or release AHB3 peripheral reset.
|
|
* @{
|
|
*/
|
|
#define __HAL_RCC_AHB3_FORCE_RESET() (RCC->AHB3RSTR = 0xFFFFFFFFU)
|
|
#define __HAL_RCC_AHB3_RELEASE_RESET() (RCC->AHB3RSTR = 0x00U)
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RCCEx_APB1_Force_Release_Reset APB1 Force Release Reset
|
|
* @brief Force or release APB1 peripheral reset.
|
|
* @{
|
|
*/
|
|
#define __HAL_RCC_TIM2_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM2RST))
|
|
#define __HAL_RCC_TIM3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM3RST))
|
|
#define __HAL_RCC_TIM4_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM4RST))
|
|
#define __HAL_RCC_SPI3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_SPI3RST))
|
|
#define __HAL_RCC_I2C3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_I2C3RST))
|
|
|
|
#define __HAL_RCC_TIM2_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM2RST))
|
|
#define __HAL_RCC_TIM3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM3RST))
|
|
#define __HAL_RCC_TIM4_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM4RST))
|
|
#define __HAL_RCC_SPI3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_SPI3RST))
|
|
#define __HAL_RCC_I2C3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_I2C3RST))
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RCCEx_APB2_Force_Release_Reset APB2 Force Release Reset
|
|
* @brief Force or release APB2 peripheral reset.
|
|
* @{
|
|
*/
|
|
#define __HAL_RCC_SPI5_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SPI5RST))
|
|
#define __HAL_RCC_SDIO_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SDIORST))
|
|
#define __HAL_RCC_SPI4_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SPI4RST))
|
|
#define __HAL_RCC_TIM10_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM10RST))
|
|
|
|
#define __HAL_RCC_SDIO_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SDIORST))
|
|
#define __HAL_RCC_SPI4_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SPI4RST))
|
|
#define __HAL_RCC_TIM10_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_TIM10RST))
|
|
#define __HAL_RCC_SPI5_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SPI5RST))
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RCCEx_AHB1_LowPower_Enable_Disable AHB1 Peripheral Low Power Enable Disable
|
|
* @brief Enable or disable the AHB1 peripheral clock during Low Power (Sleep) mode.
|
|
* @note Peripheral clock gating in SLEEP mode can be used to further reduce
|
|
* power consumption.
|
|
* @note After wakeup from SLEEP mode, the peripheral clock is enabled again.
|
|
* @note By default, all peripheral clocks are enabled during SLEEP mode.
|
|
* @{
|
|
*/
|
|
#define __HAL_RCC_GPIOD_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIODLPEN))
|
|
#define __HAL_RCC_GPIOE_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOELPEN))
|
|
#define __HAL_RCC_CRC_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_CRCLPEN))
|
|
#define __HAL_RCC_FLITF_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_FLITFLPEN))
|
|
#define __HAL_RCC_SRAM1_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_SRAM1LPEN))
|
|
|
|
#define __HAL_RCC_GPIOD_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIODLPEN))
|
|
#define __HAL_RCC_GPIOE_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOELPEN))
|
|
#define __HAL_RCC_CRC_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_CRCLPEN))
|
|
#define __HAL_RCC_FLITF_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_FLITFLPEN))
|
|
#define __HAL_RCC_SRAM1_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_SRAM1LPEN))
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RCCEx_AHB2_LowPower_Enable_Disable AHB2 Peripheral Low Power Enable Disable
|
|
* @brief Enable or disable the AHB2 peripheral clock during Low Power (Sleep) mode.
|
|
* @note Peripheral clock gating in SLEEP mode can be used to further reduce
|
|
* power consumption.
|
|
* @note After wake-up from SLEEP mode, the peripheral clock is enabled again.
|
|
* @note By default, all peripheral clocks are enabled during SLEEP mode.
|
|
* @{
|
|
*/
|
|
#define __HAL_RCC_USB_OTG_FS_CLK_SLEEP_ENABLE() (RCC->AHB2LPENR |= (RCC_AHB2LPENR_OTGFSLPEN))
|
|
#define __HAL_RCC_USB_OTG_FS_CLK_SLEEP_DISABLE() (RCC->AHB2LPENR &= ~(RCC_AHB2LPENR_OTGFSLPEN))
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RCCEx_APB1_LowPower_Enable_Disable APB1 Peripheral Low Power Enable Disable
|
|
* @brief Enable or disable the APB1 peripheral clock during Low Power (Sleep) mode.
|
|
* @{
|
|
*/
|
|
#define __HAL_RCC_TIM2_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM2LPEN))
|
|
#define __HAL_RCC_TIM3_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM3LPEN))
|
|
#define __HAL_RCC_TIM4_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM4LPEN))
|
|
#define __HAL_RCC_SPI3_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_SPI3LPEN))
|
|
#define __HAL_RCC_I2C3_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_I2C3LPEN))
|
|
|
|
#define __HAL_RCC_TIM2_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM2LPEN))
|
|
#define __HAL_RCC_TIM3_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM3LPEN))
|
|
#define __HAL_RCC_TIM4_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM4LPEN))
|
|
#define __HAL_RCC_SPI3_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_SPI3LPEN))
|
|
#define __HAL_RCC_I2C3_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_I2C3LPEN))
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RCCEx_APB2_LowPower_Enable_Disable APB2 Peripheral Low Power Enable Disable
|
|
* @brief Enable or disable the APB2 peripheral clock during Low Power (Sleep) mode.
|
|
* @{
|
|
*/
|
|
#define __HAL_RCC_SPI5_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_SPI5LPEN))
|
|
#define __HAL_RCC_SDIO_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_SDIOLPEN))
|
|
#define __HAL_RCC_SPI4_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_SPI4LPEN))
|
|
#define __HAL_RCC_TIM10_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_TIM10LPEN))
|
|
|
|
#define __HAL_RCC_SDIO_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_SDIOLPEN))
|
|
#define __HAL_RCC_SPI4_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_SPI4LPEN))
|
|
#define __HAL_RCC_TIM10_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_TIM10LPEN))
|
|
#define __HAL_RCC_SPI5_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_SPI5LPEN))
|
|
/**
|
|
* @}
|
|
*/
|
|
#endif /* STM32F411xE */
|
|
/*----------------------------------------------------------------------------*/
|
|
|
|
/*---------------------------------- STM32F446xx -----------------------------*/
|
|
#if defined(STM32F446xx)
|
|
/** @defgroup RCCEx_AHB1_Clock_Enable_Disable AHB1 Peripheral Clock Enable Disable
|
|
* @brief Enables or disables the AHB1 peripheral clock.
|
|
* @note After reset, the peripheral clock (used for registers read/write access)
|
|
* is disabled and the application software has to enable this clock before
|
|
* using it.
|
|
* @{
|
|
*/
|
|
#define __HAL_RCC_BKPSRAM_CLK_ENABLE() do { \
|
|
__IO uint32_t tmpreg = 0x00U; \
|
|
SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_BKPSRAMEN);\
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_BKPSRAMEN);\
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
#define __HAL_RCC_CCMDATARAMEN_CLK_ENABLE() do { \
|
|
__IO uint32_t tmpreg = 0x00U; \
|
|
SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_CCMDATARAMEN);\
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_CCMDATARAMEN);\
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
#define __HAL_RCC_CRC_CLK_ENABLE() do { \
|
|
__IO uint32_t tmpreg = 0x00U; \
|
|
SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_CRCEN);\
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_CRCEN);\
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
#define __HAL_RCC_GPIOD_CLK_ENABLE() do { \
|
|
__IO uint32_t tmpreg = 0x00U; \
|
|
SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIODEN);\
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIODEN);\
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
#define __HAL_RCC_GPIOE_CLK_ENABLE() do { \
|
|
__IO uint32_t tmpreg = 0x00U; \
|
|
SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOEEN);\
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOEEN);\
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
#define __HAL_RCC_GPIOF_CLK_ENABLE() do { \
|
|
__IO uint32_t tmpreg = 0x00U; \
|
|
SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOFEN);\
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOFEN);\
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
#define __HAL_RCC_GPIOG_CLK_ENABLE() do { \
|
|
__IO uint32_t tmpreg = 0x00U; \
|
|
SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOGEN);\
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOGEN);\
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
#define __HAL_RCC_USB_OTG_HS_CLK_ENABLE() do { \
|
|
__IO uint32_t tmpreg = 0x00U; \
|
|
SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_OTGHSEN);\
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_OTGHSEN);\
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
#define __HAL_RCC_USB_OTG_HS_ULPI_CLK_ENABLE() do { \
|
|
__IO uint32_t tmpreg = 0x00U; \
|
|
SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_OTGHSULPIEN);\
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_OTGHSULPIEN);\
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
#define __HAL_RCC_GPIOD_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIODEN))
|
|
#define __HAL_RCC_GPIOE_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOEEN))
|
|
#define __HAL_RCC_GPIOF_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOFEN))
|
|
#define __HAL_RCC_GPIOG_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOGEN))
|
|
#define __HAL_RCC_USB_OTG_HS_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_OTGHSEN))
|
|
#define __HAL_RCC_USB_OTG_HS_ULPI_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_OTGHSULPIEN))
|
|
#define __HAL_RCC_BKPSRAM_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_BKPSRAMEN))
|
|
#define __HAL_RCC_CCMDATARAMEN_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_CCMDATARAMEN))
|
|
#define __HAL_RCC_CRC_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_CRCEN))
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RCCEx_AHB1_Peripheral_Clock_Enable_Disable_Status AHB1 Peripheral Clock Enable Disable Status
|
|
* @brief Get the enable or disable status of the AHB1 peripheral clock.
|
|
* @note After reset, the peripheral clock (used for registers read/write access)
|
|
* is disabled and the application software has to enable this clock before
|
|
* using it.
|
|
* @{
|
|
*/
|
|
#define __HAL_RCC_GPIOD_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIODEN)) != RESET)
|
|
#define __HAL_RCC_GPIOE_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOEEN)) != RESET)
|
|
#define __HAL_RCC_GPIOF_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOFEN)) != RESET)
|
|
#define __HAL_RCC_GPIOG_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOGEN)) != RESET)
|
|
#define __HAL_RCC_USB_OTG_HS_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_OTGHSEN)) != RESET)
|
|
#define __HAL_RCC_USB_OTG_HS_ULPI_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_OTGHSULPIEN)) != RESET)
|
|
#define __HAL_RCC_BKPSRAM_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_BKPSRAMEN)) != RESET)
|
|
#define __HAL_RCC_CCMDATARAMEN_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_CCMDATARAMEN))!= RESET)
|
|
#define __HAL_RCC_CRC_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_CRCEN)) != RESET)
|
|
|
|
#define __HAL_RCC_GPIOD_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIODEN)) == RESET)
|
|
#define __HAL_RCC_GPIOE_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOEEN)) == RESET)
|
|
#define __HAL_RCC_GPIOF_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOFEN)) == RESET)
|
|
#define __HAL_RCC_GPIOG_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOGEN)) == RESET)
|
|
#define __HAL_RCC_USB_OTG_HS_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_OTGHSEN)) == RESET)
|
|
#define __HAL_RCC_USB_OTG_HS_ULPI_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_OTGHSULPIEN)) == RESET)
|
|
#define __HAL_RCC_BKPSRAM_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_BKPSRAMEN)) == RESET)
|
|
#define __HAL_RCC_CCMDATARAMEN_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_CCMDATARAMEN)) == RESET)
|
|
#define __HAL_RCC_CRC_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_CRCEN)) == RESET)
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RCCEx_AHB2_Clock_Enable_Disable AHB2 Peripheral Clock Enable Disable
|
|
* @brief Enable or disable the AHB2 peripheral clock.
|
|
* @note After reset, the peripheral clock (used for registers read/write access)
|
|
* is disabled and the application software has to enable this clock before
|
|
* using it.
|
|
* @{
|
|
*/
|
|
#define __HAL_RCC_DCMI_CLK_ENABLE() do { \
|
|
__IO uint32_t tmpreg = 0x00U; \
|
|
SET_BIT(RCC->AHB2ENR, RCC_AHB2ENR_DCMIEN);\
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_DCMIEN);\
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
#define __HAL_RCC_DCMI_CLK_DISABLE() (RCC->AHB2ENR &= ~(RCC_AHB2ENR_DCMIEN))
|
|
#define __HAL_RCC_USB_OTG_FS_CLK_ENABLE() do {(RCC->AHB2ENR |= (RCC_AHB2ENR_OTGFSEN));\
|
|
__HAL_RCC_SYSCFG_CLK_ENABLE();\
|
|
}while(0)
|
|
|
|
#define __HAL_RCC_USB_OTG_FS_CLK_DISABLE() (RCC->AHB2ENR &= ~(RCC_AHB2ENR_OTGFSEN))
|
|
|
|
#define __HAL_RCC_RNG_CLK_ENABLE() do { \
|
|
__IO uint32_t tmpreg = 0x00U; \
|
|
SET_BIT(RCC->AHB2ENR, RCC_AHB2ENR_RNGEN);\
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_RNGEN);\
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
#define __HAL_RCC_RNG_CLK_DISABLE() (RCC->AHB2ENR &= ~(RCC_AHB2ENR_RNGEN))
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RCCEx_AHB2_Peripheral_Clock_Enable_Disable_Status AHB2 Peripheral Clock Enable Disable Status
|
|
* @brief Get the enable or disable status of the AHB2 peripheral clock.
|
|
* @note After reset, the peripheral clock (used for registers read/write access)
|
|
* is disabled and the application software has to enable this clock before
|
|
* using it.
|
|
* @{
|
|
*/
|
|
#define __HAL_RCC_DCMI_IS_CLK_ENABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_DCMIEN)) != RESET)
|
|
#define __HAL_RCC_DCMI_IS_CLK_DISABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_DCMIEN)) == RESET)
|
|
|
|
#define __HAL_RCC_USB_OTG_FS_IS_CLK_ENABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_OTGFSEN)) != RESET)
|
|
#define __HAL_RCC_USB_OTG_FS_IS_CLK_DISABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_OTGFSEN)) == RESET)
|
|
|
|
#define __HAL_RCC_RNG_IS_CLK_ENABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_RNGEN)) != RESET)
|
|
#define __HAL_RCC_RNG_IS_CLK_DISABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_RNGEN)) == RESET)
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RCCEx_AHB3_Clock_Enable_Disable AHB3 Peripheral Clock Enable Disable
|
|
* @brief Enables or disables the AHB3 peripheral clock.
|
|
* @note After reset, the peripheral clock (used for registers read/write access)
|
|
* is disabled and the application software has to enable this clock before
|
|
* using it.
|
|
* @{
|
|
*/
|
|
#define __HAL_RCC_FMC_CLK_ENABLE() do { \
|
|
__IO uint32_t tmpreg = 0x00U; \
|
|
SET_BIT(RCC->AHB3ENR, RCC_AHB3ENR_FMCEN);\
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_FMCEN);\
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
#define __HAL_RCC_QSPI_CLK_ENABLE() do { \
|
|
__IO uint32_t tmpreg = 0x00U; \
|
|
SET_BIT(RCC->AHB3ENR, RCC_AHB3ENR_QSPIEN);\
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_QSPIEN);\
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
|
|
#define __HAL_RCC_FMC_CLK_DISABLE() (RCC->AHB3ENR &= ~(RCC_AHB3ENR_FMCEN))
|
|
#define __HAL_RCC_QSPI_CLK_DISABLE() (RCC->AHB3ENR &= ~(RCC_AHB3ENR_QSPIEN))
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RCCEx_AHB3_Peripheral_Clock_Enable_Disable_Status AHB3 Peripheral Clock Enable Disable Status
|
|
* @brief Get the enable or disable status of the AHB3 peripheral clock.
|
|
* @note After reset, the peripheral clock (used for registers read/write access)
|
|
* is disabled and the application software has to enable this clock before
|
|
* using it.
|
|
* @{
|
|
*/
|
|
#define __HAL_RCC_FMC_IS_CLK_ENABLED() ((RCC->AHB3ENR & (RCC_AHB3ENR_FMCEN)) != RESET)
|
|
#define __HAL_RCC_QSPI_IS_CLK_ENABLED() ((RCC->AHB3ENR & (RCC_AHB3ENR_QSPIEN)) != RESET)
|
|
|
|
#define __HAL_RCC_FMC_IS_CLK_DISABLED() ((RCC->AHB3ENR & (RCC_AHB3ENR_FMCEN)) == RESET)
|
|
#define __HAL_RCC_QSPI_IS_CLK_DISABLED() ((RCC->AHB3ENR & (RCC_AHB3ENR_QSPIEN)) == RESET)
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RCCEx_APB1_Clock_Enable_Disable APB1 Peripheral Clock Enable Disable
|
|
* @brief Enable or disable the Low Speed APB (APB1) peripheral clock.
|
|
* @note After reset, the peripheral clock (used for registers read/write access)
|
|
* is disabled and the application software has to enable this clock before
|
|
* using it.
|
|
* @{
|
|
*/
|
|
#define __HAL_RCC_TIM6_CLK_ENABLE() do { \
|
|
__IO uint32_t tmpreg = 0x00U; \
|
|
SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM6EN);\
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM6EN);\
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
#define __HAL_RCC_TIM7_CLK_ENABLE() do { \
|
|
__IO uint32_t tmpreg = 0x00U; \
|
|
SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM7EN);\
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM7EN);\
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
#define __HAL_RCC_TIM12_CLK_ENABLE() do { \
|
|
__IO uint32_t tmpreg = 0x00U; \
|
|
SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM12EN);\
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM12EN);\
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
#define __HAL_RCC_TIM13_CLK_ENABLE() do { \
|
|
__IO uint32_t tmpreg = 0x00U; \
|
|
SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM13EN);\
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM13EN);\
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
#define __HAL_RCC_TIM14_CLK_ENABLE() do { \
|
|
__IO uint32_t tmpreg = 0x00U; \
|
|
SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM14EN);\
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM14EN);\
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
#define __HAL_RCC_SPDIFRX_CLK_ENABLE() do { \
|
|
__IO uint32_t tmpreg = 0x00U; \
|
|
SET_BIT(RCC->APB1ENR, RCC_APB1ENR_SPDIFRXEN);\
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_SPDIFRXEN);\
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
#define __HAL_RCC_USART3_CLK_ENABLE() do { \
|
|
__IO uint32_t tmpreg = 0x00U; \
|
|
SET_BIT(RCC->APB1ENR, RCC_APB1ENR_USART3EN);\
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_USART3EN);\
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
#define __HAL_RCC_UART4_CLK_ENABLE() do { \
|
|
__IO uint32_t tmpreg = 0x00U; \
|
|
SET_BIT(RCC->APB1ENR, RCC_APB1ENR_UART4EN);\
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_UART4EN);\
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
#define __HAL_RCC_UART5_CLK_ENABLE() do { \
|
|
__IO uint32_t tmpreg = 0x00U; \
|
|
SET_BIT(RCC->APB1ENR, RCC_APB1ENR_UART5EN);\
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_UART5EN);\
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
#define __HAL_RCC_FMPI2C1_CLK_ENABLE() do { \
|
|
__IO uint32_t tmpreg = 0x00U; \
|
|
SET_BIT(RCC->APB1ENR, RCC_APB1ENR_FMPI2C1EN);\
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_FMPI2C1EN);\
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
#define __HAL_RCC_CAN1_CLK_ENABLE() do { \
|
|
__IO uint32_t tmpreg = 0x00U; \
|
|
SET_BIT(RCC->APB1ENR, RCC_APB1ENR_CAN1EN);\
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_CAN1EN);\
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
#define __HAL_RCC_CAN2_CLK_ENABLE() do { \
|
|
__IO uint32_t tmpreg = 0x00U; \
|
|
SET_BIT(RCC->APB1ENR, RCC_APB1ENR_CAN2EN);\
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_CAN2EN);\
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
#define __HAL_RCC_CEC_CLK_ENABLE() do { \
|
|
__IO uint32_t tmpreg = 0x00U; \
|
|
SET_BIT(RCC->APB1ENR, RCC_APB1ENR_CECEN);\
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_CECEN);\
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
#define __HAL_RCC_DAC_CLK_ENABLE() do { \
|
|
__IO uint32_t tmpreg = 0x00U; \
|
|
SET_BIT(RCC->APB1ENR, RCC_APB1ENR_DACEN);\
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_DACEN);\
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
#define __HAL_RCC_TIM2_CLK_ENABLE() do { \
|
|
__IO uint32_t tmpreg = 0x00U; \
|
|
SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM2EN);\
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM2EN);\
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
#define __HAL_RCC_TIM3_CLK_ENABLE() do { \
|
|
__IO uint32_t tmpreg = 0x00U; \
|
|
SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM3EN);\
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM3EN);\
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
#define __HAL_RCC_TIM4_CLK_ENABLE() do { \
|
|
__IO uint32_t tmpreg = 0x00U; \
|
|
SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM4EN);\
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM4EN);\
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
#define __HAL_RCC_SPI3_CLK_ENABLE() do { \
|
|
__IO uint32_t tmpreg = 0x00U; \
|
|
SET_BIT(RCC->APB1ENR, RCC_APB1ENR_SPI3EN);\
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_SPI3EN);\
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
#define __HAL_RCC_I2C3_CLK_ENABLE() do { \
|
|
__IO uint32_t tmpreg = 0x00U; \
|
|
SET_BIT(RCC->APB1ENR, RCC_APB1ENR_I2C3EN);\
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_I2C3EN);\
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
#define __HAL_RCC_TIM2_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM2EN))
|
|
#define __HAL_RCC_TIM3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM3EN))
|
|
#define __HAL_RCC_TIM4_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM4EN))
|
|
#define __HAL_RCC_SPI3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_SPI3EN))
|
|
#define __HAL_RCC_I2C3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_I2C3EN))
|
|
#define __HAL_RCC_TIM6_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM6EN))
|
|
#define __HAL_RCC_TIM7_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM7EN))
|
|
#define __HAL_RCC_TIM12_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM12EN))
|
|
#define __HAL_RCC_TIM13_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM13EN))
|
|
#define __HAL_RCC_TIM14_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM14EN))
|
|
#define __HAL_RCC_SPDIFRX_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_SPDIFRXEN))
|
|
#define __HAL_RCC_USART3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_USART3EN))
|
|
#define __HAL_RCC_UART4_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_UART4EN))
|
|
#define __HAL_RCC_UART5_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_UART5EN))
|
|
#define __HAL_RCC_FMPI2C1_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_FMPI2C1EN))
|
|
#define __HAL_RCC_CAN1_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_CAN1EN))
|
|
#define __HAL_RCC_CAN2_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_CAN2EN))
|
|
#define __HAL_RCC_CEC_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_CECEN))
|
|
#define __HAL_RCC_DAC_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_DACEN))
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RCCEx_APB1_Peripheral_Clock_Enable_Disable_Status APB1 Peripheral Clock Enable Disable Status
|
|
* @brief Get the enable or disable status of the APB1 peripheral clock.
|
|
* @note After reset, the peripheral clock (used for registers read/write access)
|
|
* is disabled and the application software has to enable this clock before
|
|
* using it.
|
|
* @{
|
|
*/
|
|
#define __HAL_RCC_TIM2_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM2EN)) != RESET)
|
|
#define __HAL_RCC_TIM3_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM3EN)) != RESET)
|
|
#define __HAL_RCC_TIM4_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM4EN)) != RESET)
|
|
#define __HAL_RCC_SPI3_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_SPI3EN)) != RESET)
|
|
#define __HAL_RCC_I2C3_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_I2C3EN)) != RESET)
|
|
#define __HAL_RCC_TIM6_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM6EN)) != RESET)
|
|
#define __HAL_RCC_TIM7_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM7EN)) != RESET)
|
|
#define __HAL_RCC_TIM12_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM12EN)) != RESET)
|
|
#define __HAL_RCC_TIM13_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM13EN)) != RESET)
|
|
#define __HAL_RCC_TIM14_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM14EN)) != RESET)
|
|
#define __HAL_RCC_SPDIFRX_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_SPDIFRXEN)) != RESET)
|
|
#define __HAL_RCC_USART3_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_USART3EN)) != RESET)
|
|
#define __HAL_RCC_UART4_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_UART4EN)) != RESET)
|
|
#define __HAL_RCC_UART5_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_UART5EN)) != RESET)
|
|
#define __HAL_RCC_FMPI2C1_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_FMPI2C1EN)) != RESET)
|
|
#define __HAL_RCC_CAN1_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_CAN1EN)) != RESET)
|
|
#define __HAL_RCC_CAN2_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_CAN2EN)) != RESET)
|
|
#define __HAL_RCC_CEC_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_CECEN)) != RESET)
|
|
#define __HAL_RCC_DAC_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_DACEN)) != RESET)
|
|
|
|
#define __HAL_RCC_TIM2_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM2EN)) == RESET)
|
|
#define __HAL_RCC_TIM3_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM3EN)) == RESET)
|
|
#define __HAL_RCC_TIM4_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM4EN)) == RESET)
|
|
#define __HAL_RCC_SPI3_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_SPI3EN)) == RESET)
|
|
#define __HAL_RCC_I2C3_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_I2C3EN)) == RESET)
|
|
#define __HAL_RCC_TIM6_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM6EN)) == RESET)
|
|
#define __HAL_RCC_TIM7_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM7EN)) == RESET)
|
|
#define __HAL_RCC_TIM12_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM12EN)) == RESET)
|
|
#define __HAL_RCC_TIM13_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM13EN)) == RESET)
|
|
#define __HAL_RCC_TIM14_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM14EN)) == RESET)
|
|
#define __HAL_RCC_SPDIFRX_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_SPDIFRXEN)) == RESET)
|
|
#define __HAL_RCC_USART3_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_USART3EN)) == RESET)
|
|
#define __HAL_RCC_UART4_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_UART4EN)) == RESET)
|
|
#define __HAL_RCC_UART5_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_UART5EN)) == RESET)
|
|
#define __HAL_RCC_FMPI2C1_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_FMPI2C1EN)) == RESET)
|
|
#define __HAL_RCC_CAN1_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_CAN1EN)) == RESET)
|
|
#define __HAL_RCC_CAN2_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_CAN2EN)) == RESET)
|
|
#define __HAL_RCC_CEC_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_CECEN)) == RESET)
|
|
#define __HAL_RCC_DAC_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_DACEN)) == RESET)
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RCCEx_APB2_Clock_Enable_Disable APB2 Peripheral Clock Enable Disable
|
|
* @brief Enable or disable the High Speed APB (APB2) peripheral clock.
|
|
* @note After reset, the peripheral clock (used for registers read/write access)
|
|
* is disabled and the application software has to enable this clock before
|
|
* using it.
|
|
* @{
|
|
*/
|
|
#define __HAL_RCC_TIM8_CLK_ENABLE() do { \
|
|
__IO uint32_t tmpreg = 0x00U; \
|
|
SET_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM8EN);\
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM8EN);\
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
#define __HAL_RCC_ADC2_CLK_ENABLE() do { \
|
|
__IO uint32_t tmpreg = 0x00U; \
|
|
SET_BIT(RCC->APB2ENR, RCC_APB2ENR_ADC2EN);\
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_ADC2EN);\
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
#define __HAL_RCC_ADC3_CLK_ENABLE() do { \
|
|
__IO uint32_t tmpreg = 0x00U; \
|
|
SET_BIT(RCC->APB2ENR, RCC_APB2ENR_ADC3EN);\
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_ADC3EN);\
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
#define __HAL_RCC_SAI1_CLK_ENABLE() do { \
|
|
__IO uint32_t tmpreg = 0x00U; \
|
|
SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SAI1EN);\
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SAI1EN);\
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
#define __HAL_RCC_SAI2_CLK_ENABLE() do { \
|
|
__IO uint32_t tmpreg = 0x00U; \
|
|
SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SAI2EN);\
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SAI2EN);\
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
#define __HAL_RCC_SDIO_CLK_ENABLE() do { \
|
|
__IO uint32_t tmpreg = 0x00U; \
|
|
SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SDIOEN);\
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SDIOEN);\
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
#define __HAL_RCC_SPI4_CLK_ENABLE() do { \
|
|
__IO uint32_t tmpreg = 0x00U; \
|
|
SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI4EN);\
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI4EN);\
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
#define __HAL_RCC_TIM10_CLK_ENABLE() do { \
|
|
__IO uint32_t tmpreg = 0x00U; \
|
|
SET_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM10EN);\
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM10EN);\
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
#define __HAL_RCC_SDIO_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SDIOEN))
|
|
#define __HAL_RCC_SPI4_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SPI4EN))
|
|
#define __HAL_RCC_TIM10_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_TIM10EN))
|
|
#define __HAL_RCC_TIM8_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_TIM8EN))
|
|
#define __HAL_RCC_ADC2_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_ADC2EN))
|
|
#define __HAL_RCC_ADC3_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_ADC3EN))
|
|
#define __HAL_RCC_SAI1_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SAI1EN))
|
|
#define __HAL_RCC_SAI2_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SAI2EN))
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RCCEx_APB2_Peripheral_Clock_Enable_Disable_Status APB2 Peripheral Clock Enable Disable Status
|
|
* @brief Get the enable or disable status of the APB2 peripheral clock.
|
|
* @note After reset, the peripheral clock (used for registers read/write access)
|
|
* is disabled and the application software has to enable this clock before
|
|
* using it.
|
|
* @{
|
|
*/
|
|
#define __HAL_RCC_SDIO_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SDIOEN)) != RESET)
|
|
#define __HAL_RCC_SPI4_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SPI4EN)) != RESET)
|
|
#define __HAL_RCC_TIM10_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM10EN)) != RESET)
|
|
#define __HAL_RCC_TIM8_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM8EN)) != RESET)
|
|
#define __HAL_RCC_ADC2_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_ADC2EN)) != RESET)
|
|
#define __HAL_RCC_ADC3_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_ADC3EN)) != RESET)
|
|
#define __HAL_RCC_SAI1_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SAI1EN)) != RESET)
|
|
#define __HAL_RCC_SAI2_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SAI2EN)) != RESET)
|
|
|
|
#define __HAL_RCC_SDIO_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SDIOEN)) == RESET)
|
|
#define __HAL_RCC_SPI4_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SPI4EN)) == RESET)
|
|
#define __HAL_RCC_TIM10_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM10EN)) == RESET)
|
|
#define __HAL_RCC_TIM8_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM8EN)) == RESET)
|
|
#define __HAL_RCC_ADC2_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_ADC2EN)) == RESET)
|
|
#define __HAL_RCC_ADC3_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_ADC3EN)) == RESET)
|
|
#define __HAL_RCC_SAI1_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SAI1EN)) == RESET)
|
|
#define __HAL_RCC_SAI2_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SAI2EN)) == RESET)
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RCCEx_AHB1_Force_Release_Reset AHB1 Force Release Reset
|
|
* @brief Force or release AHB1 peripheral reset.
|
|
* @{
|
|
*/
|
|
#define __HAL_RCC_GPIOD_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIODRST))
|
|
#define __HAL_RCC_GPIOE_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOERST))
|
|
#define __HAL_RCC_GPIOF_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOFRST))
|
|
#define __HAL_RCC_GPIOG_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOGRST))
|
|
#define __HAL_RCC_USB_OTG_HS_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_OTGHRST))
|
|
#define __HAL_RCC_CRC_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_CRCRST))
|
|
|
|
#define __HAL_RCC_GPIOD_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIODRST))
|
|
#define __HAL_RCC_GPIOE_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOERST))
|
|
#define __HAL_RCC_GPIOF_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOFRST))
|
|
#define __HAL_RCC_GPIOG_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOGRST))
|
|
#define __HAL_RCC_USB_OTG_HS_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_OTGHRST))
|
|
#define __HAL_RCC_CRC_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_CRCRST))
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RCCEx_AHB2_Force_Release_Reset AHB2 Force Release Reset
|
|
* @brief Force or release AHB2 peripheral reset.
|
|
* @{
|
|
*/
|
|
#define __HAL_RCC_AHB2_FORCE_RESET() (RCC->AHB2RSTR = 0xFFFFFFFFU)
|
|
#define __HAL_RCC_USB_OTG_FS_FORCE_RESET() (RCC->AHB2RSTR |= (RCC_AHB2RSTR_OTGFSRST))
|
|
#define __HAL_RCC_RNG_FORCE_RESET() (RCC->AHB2RSTR |= (RCC_AHB2RSTR_RNGRST))
|
|
#define __HAL_RCC_DCMI_FORCE_RESET() (RCC->AHB2RSTR |= (RCC_AHB2RSTR_DCMIRST))
|
|
|
|
#define __HAL_RCC_AHB2_RELEASE_RESET() (RCC->AHB2RSTR = 0x00U)
|
|
#define __HAL_RCC_USB_OTG_FS_RELEASE_RESET() (RCC->AHB2RSTR &= ~(RCC_AHB2RSTR_OTGFSRST))
|
|
#define __HAL_RCC_RNG_RELEASE_RESET() (RCC->AHB2RSTR &= ~(RCC_AHB2RSTR_RNGRST))
|
|
#define __HAL_RCC_DCMI_RELEASE_RESET() (RCC->AHB2RSTR &= ~(RCC_AHB2RSTR_DCMIRST))
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RCCEx_AHB3_Force_Release_Reset AHB3 Force Release Reset
|
|
* @brief Force or release AHB3 peripheral reset.
|
|
* @{
|
|
*/
|
|
#define __HAL_RCC_AHB3_FORCE_RESET() (RCC->AHB3RSTR = 0xFFFFFFFFU)
|
|
#define __HAL_RCC_AHB3_RELEASE_RESET() (RCC->AHB3RSTR = 0x00U)
|
|
|
|
#define __HAL_RCC_FMC_FORCE_RESET() (RCC->AHB3RSTR |= (RCC_AHB3RSTR_FMCRST))
|
|
#define __HAL_RCC_QSPI_FORCE_RESET() (RCC->AHB3RSTR |= (RCC_AHB3RSTR_QSPIRST))
|
|
|
|
#define __HAL_RCC_FMC_RELEASE_RESET() (RCC->AHB3RSTR &= ~(RCC_AHB3RSTR_FMCRST))
|
|
#define __HAL_RCC_QSPI_RELEASE_RESET() (RCC->AHB3RSTR &= ~(RCC_AHB3RSTR_QSPIRST))
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RCCEx_APB1_Force_Release_Reset APB1 Force Release Reset
|
|
* @brief Force or release APB1 peripheral reset.
|
|
* @{
|
|
*/
|
|
#define __HAL_RCC_TIM6_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM6RST))
|
|
#define __HAL_RCC_TIM7_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM7RST))
|
|
#define __HAL_RCC_TIM12_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM12RST))
|
|
#define __HAL_RCC_TIM13_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM13RST))
|
|
#define __HAL_RCC_TIM14_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM14RST))
|
|
#define __HAL_RCC_SPDIFRX_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_SPDIFRXRST))
|
|
#define __HAL_RCC_USART3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_USART3RST))
|
|
#define __HAL_RCC_UART4_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_UART4RST))
|
|
#define __HAL_RCC_UART5_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_UART5RST))
|
|
#define __HAL_RCC_FMPI2C1_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_FMPI2C1RST))
|
|
#define __HAL_RCC_CAN1_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_CAN1RST))
|
|
#define __HAL_RCC_CAN2_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_CAN2RST))
|
|
#define __HAL_RCC_CEC_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_CECRST))
|
|
#define __HAL_RCC_DAC_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_DACRST))
|
|
#define __HAL_RCC_TIM2_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM2RST))
|
|
#define __HAL_RCC_TIM3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM3RST))
|
|
#define __HAL_RCC_TIM4_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM4RST))
|
|
#define __HAL_RCC_SPI3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_SPI3RST))
|
|
#define __HAL_RCC_I2C3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_I2C3RST))
|
|
|
|
#define __HAL_RCC_TIM2_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM2RST))
|
|
#define __HAL_RCC_TIM3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM3RST))
|
|
#define __HAL_RCC_TIM4_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM4RST))
|
|
#define __HAL_RCC_SPI3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_SPI3RST))
|
|
#define __HAL_RCC_I2C3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_I2C3RST))
|
|
#define __HAL_RCC_TIM6_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM6RST))
|
|
#define __HAL_RCC_TIM7_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM7RST))
|
|
#define __HAL_RCC_TIM12_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM12RST))
|
|
#define __HAL_RCC_TIM13_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM13RST))
|
|
#define __HAL_RCC_TIM14_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM14RST))
|
|
#define __HAL_RCC_SPDIFRX_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_SPDIFRXRST))
|
|
#define __HAL_RCC_USART3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_USART3RST))
|
|
#define __HAL_RCC_UART4_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_UART4RST))
|
|
#define __HAL_RCC_UART5_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_UART5RST))
|
|
#define __HAL_RCC_FMPI2C1_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_FMPI2C1RST))
|
|
#define __HAL_RCC_CAN1_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_CAN1RST))
|
|
#define __HAL_RCC_CAN2_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_CAN2RST))
|
|
#define __HAL_RCC_CEC_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_CECRST))
|
|
#define __HAL_RCC_DAC_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_DACRST))
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RCCEx_APB2_Force_Release_Reset APB2 Force Release Reset
|
|
* @brief Force or release APB2 peripheral reset.
|
|
* @{
|
|
*/
|
|
#define __HAL_RCC_TIM8_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM8RST))
|
|
#define __HAL_RCC_SAI1_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SAI1RST))
|
|
#define __HAL_RCC_SAI2_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SAI2RST))
|
|
#define __HAL_RCC_SDIO_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SDIORST))
|
|
#define __HAL_RCC_SPI4_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SPI4RST))
|
|
#define __HAL_RCC_TIM10_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM10RST))
|
|
|
|
#define __HAL_RCC_SDIO_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SDIORST))
|
|
#define __HAL_RCC_SPI4_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SPI4RST))
|
|
#define __HAL_RCC_TIM10_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_TIM10RST))
|
|
#define __HAL_RCC_TIM8_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_TIM8RST))
|
|
#define __HAL_RCC_SAI1_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SAI1RST))
|
|
#define __HAL_RCC_SAI2_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SAI2RST))
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RCCEx_AHB1_LowPower_Enable_Disable AHB1 Peripheral Low Power Enable Disable
|
|
* @brief Enable or disable the AHB1 peripheral clock during Low Power (Sleep) mode.
|
|
* @note Peripheral clock gating in SLEEP mode can be used to further reduce
|
|
* power consumption.
|
|
* @note After wakeup from SLEEP mode, the peripheral clock is enabled again.
|
|
* @note By default, all peripheral clocks are enabled during SLEEP mode.
|
|
* @{
|
|
*/
|
|
#define __HAL_RCC_GPIOD_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIODLPEN))
|
|
#define __HAL_RCC_GPIOE_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOELPEN))
|
|
#define __HAL_RCC_GPIOF_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOFLPEN))
|
|
#define __HAL_RCC_GPIOG_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOGLPEN))
|
|
#define __HAL_RCC_SRAM2_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_SRAM2LPEN))
|
|
#define __HAL_RCC_USB_OTG_HS_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_OTGHSLPEN))
|
|
#define __HAL_RCC_USB_OTG_HS_ULPI_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_OTGHSULPILPEN))
|
|
#define __HAL_RCC_CRC_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_CRCLPEN))
|
|
#define __HAL_RCC_FLITF_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_FLITFLPEN))
|
|
#define __HAL_RCC_SRAM1_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_SRAM1LPEN))
|
|
#define __HAL_RCC_BKPSRAM_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_BKPSRAMLPEN))
|
|
|
|
#define __HAL_RCC_GPIOD_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIODLPEN))
|
|
#define __HAL_RCC_GPIOE_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOELPEN))
|
|
#define __HAL_RCC_GPIOF_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOFLPEN))
|
|
#define __HAL_RCC_GPIOG_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOGLPEN))
|
|
#define __HAL_RCC_SRAM2_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_SRAM2LPEN))
|
|
#define __HAL_RCC_USB_OTG_HS_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_OTGHSLPEN))
|
|
#define __HAL_RCC_USB_OTG_HS_ULPI_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_OTGHSULPILPEN))
|
|
#define __HAL_RCC_CRC_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_CRCLPEN))
|
|
#define __HAL_RCC_FLITF_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_FLITFLPEN))
|
|
#define __HAL_RCC_SRAM1_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_SRAM1LPEN))
|
|
#define __HAL_RCC_BKPSRAM_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_BKPSRAMLPEN))
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RCCEx_AHB2_LowPower_Enable_Disable AHB2 Peripheral Low Power Enable Disable
|
|
* @brief Enable or disable the AHB2 peripheral clock during Low Power (Sleep) mode.
|
|
* @note Peripheral clock gating in SLEEP mode can be used to further reduce
|
|
* power consumption.
|
|
* @note After wake-up from SLEEP mode, the peripheral clock is enabled again.
|
|
* @note By default, all peripheral clocks are enabled during SLEEP mode.
|
|
* @{
|
|
*/
|
|
#define __HAL_RCC_USB_OTG_FS_CLK_SLEEP_ENABLE() (RCC->AHB2LPENR |= (RCC_AHB2LPENR_OTGFSLPEN))
|
|
#define __HAL_RCC_USB_OTG_FS_CLK_SLEEP_DISABLE() (RCC->AHB2LPENR &= ~(RCC_AHB2LPENR_OTGFSLPEN))
|
|
|
|
#define __HAL_RCC_RNG_CLK_SLEEP_ENABLE() (RCC->AHB2LPENR |= (RCC_AHB2LPENR_RNGLPEN))
|
|
#define __HAL_RCC_RNG_CLK_SLEEP_DISABLE() (RCC->AHB2LPENR &= ~(RCC_AHB2LPENR_RNGLPEN))
|
|
|
|
#define __HAL_RCC_DCMI_CLK_SLEEP_ENABLE() (RCC->AHB2LPENR |= (RCC_AHB2LPENR_DCMILPEN))
|
|
#define __HAL_RCC_DCMI_CLK_SLEEP_DISABLE() (RCC->AHB2LPENR &= ~(RCC_AHB2LPENR_DCMILPEN))
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RCCEx_AHB3_LowPower_Enable_Disable AHB3 Peripheral Low Power Enable Disable
|
|
* @brief Enable or disable the AHB3 peripheral clock during Low Power (Sleep) mode.
|
|
* @note Peripheral clock gating in SLEEP mode can be used to further reduce
|
|
* power consumption.
|
|
* @note After wakeup from SLEEP mode, the peripheral clock is enabled again.
|
|
* @note By default, all peripheral clocks are enabled during SLEEP mode.
|
|
* @{
|
|
*/
|
|
#define __HAL_RCC_FMC_CLK_SLEEP_ENABLE() (RCC->AHB3LPENR |= (RCC_AHB3LPENR_FMCLPEN))
|
|
#define __HAL_RCC_QSPI_CLK_SLEEP_ENABLE() (RCC->AHB3LPENR |= (RCC_AHB3LPENR_QSPILPEN))
|
|
|
|
#define __HAL_RCC_FMC_CLK_SLEEP_DISABLE() (RCC->AHB3LPENR &= ~(RCC_AHB3LPENR_FMCLPEN))
|
|
#define __HAL_RCC_QSPI_CLK_SLEEP_DISABLE() (RCC->AHB3LPENR &= ~(RCC_AHB3LPENR_QSPILPEN))
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RCCEx_APB1_LowPower_Enable_Disable APB1 Peripheral Low Power Enable Disable
|
|
* @brief Enable or disable the APB1 peripheral clock during Low Power (Sleep) mode.
|
|
* @note Peripheral clock gating in SLEEP mode can be used to further reduce
|
|
* power consumption.
|
|
* @note After wakeup from SLEEP mode, the peripheral clock is enabled again.
|
|
* @note By default, all peripheral clocks are enabled during SLEEP mode.
|
|
* @{
|
|
*/
|
|
#define __HAL_RCC_TIM6_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM6LPEN))
|
|
#define __HAL_RCC_TIM7_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM7LPEN))
|
|
#define __HAL_RCC_TIM12_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM12LPEN))
|
|
#define __HAL_RCC_TIM13_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM13LPEN))
|
|
#define __HAL_RCC_TIM14_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM14LPEN))
|
|
#define __HAL_RCC_SPDIFRX_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_SPDIFRXLPEN))
|
|
#define __HAL_RCC_USART3_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_USART3LPEN))
|
|
#define __HAL_RCC_UART4_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_UART4LPEN))
|
|
#define __HAL_RCC_UART5_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_UART5LPEN))
|
|
#define __HAL_RCC_FMPI2C1_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_FMPI2C1LPEN))
|
|
#define __HAL_RCC_CAN1_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_CAN1LPEN))
|
|
#define __HAL_RCC_CAN2_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_CAN2LPEN))
|
|
#define __HAL_RCC_CEC_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_CECLPEN))
|
|
#define __HAL_RCC_DAC_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_DACLPEN))
|
|
#define __HAL_RCC_TIM2_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM2LPEN))
|
|
#define __HAL_RCC_TIM3_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM3LPEN))
|
|
#define __HAL_RCC_TIM4_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM4LPEN))
|
|
#define __HAL_RCC_SPI3_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_SPI3LPEN))
|
|
#define __HAL_RCC_I2C3_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_I2C3LPEN))
|
|
|
|
#define __HAL_RCC_TIM2_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM2LPEN))
|
|
#define __HAL_RCC_TIM3_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM3LPEN))
|
|
#define __HAL_RCC_TIM4_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM4LPEN))
|
|
#define __HAL_RCC_SPI3_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_SPI3LPEN))
|
|
#define __HAL_RCC_I2C3_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_I2C3LPEN))
|
|
#define __HAL_RCC_TIM6_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM6LPEN))
|
|
#define __HAL_RCC_TIM7_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM7LPEN))
|
|
#define __HAL_RCC_TIM12_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM12LPEN))
|
|
#define __HAL_RCC_TIM13_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM13LPEN))
|
|
#define __HAL_RCC_TIM14_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM14LPEN))
|
|
#define __HAL_RCC_SPDIFRX_CLK_SLEEP_DISABLE()(RCC->APB1LPENR &= ~(RCC_APB1LPENR_SPDIFRXLPEN))
|
|
#define __HAL_RCC_USART3_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_USART3LPEN))
|
|
#define __HAL_RCC_UART4_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_UART4LPEN))
|
|
#define __HAL_RCC_UART5_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_UART5LPEN))
|
|
#define __HAL_RCC_FMPI2C1_CLK_SLEEP_DISABLE()(RCC->APB1LPENR &= ~(RCC_APB1LPENR_FMPI2C1LPEN))
|
|
#define __HAL_RCC_CAN1_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_CAN1LPEN))
|
|
#define __HAL_RCC_CAN2_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_CAN2LPEN))
|
|
#define __HAL_RCC_CEC_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_CECLPEN))
|
|
#define __HAL_RCC_DAC_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_DACLPEN))
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RCCEx_APB2_LowPower_Enable_Disable APB2 Peripheral Low Power Enable Disable
|
|
* @brief Enable or disable the APB2 peripheral clock during Low Power (Sleep) mode.
|
|
* @note Peripheral clock gating in SLEEP mode can be used to further reduce
|
|
* power consumption.
|
|
* @note After wakeup from SLEEP mode, the peripheral clock is enabled again.
|
|
* @note By default, all peripheral clocks are enabled during SLEEP mode.
|
|
* @{
|
|
*/
|
|
#define __HAL_RCC_TIM8_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_TIM8LPEN))
|
|
#define __HAL_RCC_ADC2_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_ADC2LPEN))
|
|
#define __HAL_RCC_ADC3_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_ADC3LPEN))
|
|
#define __HAL_RCC_SAI1_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_SAI1LPEN))
|
|
#define __HAL_RCC_SAI2_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_SAI2LPEN))
|
|
#define __HAL_RCC_SDIO_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_SDIOLPEN))
|
|
#define __HAL_RCC_SPI4_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_SPI4LPEN))
|
|
#define __HAL_RCC_TIM10_CLK_SLEEP_ENABLE()(RCC->APB2LPENR |= (RCC_APB2LPENR_TIM10LPEN))
|
|
|
|
#define __HAL_RCC_SDIO_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_SDIOLPEN))
|
|
#define __HAL_RCC_SPI4_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_SPI4LPEN))
|
|
#define __HAL_RCC_TIM10_CLK_SLEEP_DISABLE()(RCC->APB2LPENR &= ~(RCC_APB2LPENR_TIM10LPEN))
|
|
#define __HAL_RCC_TIM8_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_TIM8LPEN))
|
|
#define __HAL_RCC_ADC2_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_ADC2LPEN))
|
|
#define __HAL_RCC_ADC3_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_ADC3LPEN))
|
|
#define __HAL_RCC_SAI1_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_SAI1LPEN))
|
|
#define __HAL_RCC_SAI2_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_SAI2LPEN))
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
#endif /* STM32F446xx */
|
|
/*----------------------------------------------------------------------------*/
|
|
|
|
/*----------STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx----------*/
|
|
#if defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx)
|
|
/** @defgroup RCCEx_AHB1_Clock_Enable_Disable AHB1 Peripheral Clock Enable Disable
|
|
* @brief Enables or disables the AHB1 peripheral clock.
|
|
* @note After reset, the peripheral clock (used for registers read/write access)
|
|
* is disabled and the application software has to enable this clock before
|
|
* using it.
|
|
* @{
|
|
*/
|
|
#define __HAL_RCC_CRC_CLK_ENABLE() do { \
|
|
__IO uint32_t tmpreg = 0x00U; \
|
|
SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_CRCEN);\
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_CRCEN);\
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
#define __HAL_RCC_GPIOD_CLK_ENABLE() do { \
|
|
__IO uint32_t tmpreg = 0x00U; \
|
|
SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIODEN);\
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIODEN);\
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
#define __HAL_RCC_GPIOE_CLK_ENABLE() do { \
|
|
__IO uint32_t tmpreg = 0x00U; \
|
|
SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOEEN);\
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOEEN);\
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
#define __HAL_RCC_GPIOF_CLK_ENABLE() do { \
|
|
__IO uint32_t tmpreg = 0x00U; \
|
|
SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOFEN);\
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOFEN);\
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
#define __HAL_RCC_GPIOG_CLK_ENABLE() do { \
|
|
__IO uint32_t tmpreg = 0x00U; \
|
|
SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOGEN);\
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOGEN);\
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
#define __HAL_RCC_CRC_CLK_ENABLE() do { \
|
|
__IO uint32_t tmpreg = 0x00U; \
|
|
SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_CRCEN);\
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_CRCEN);\
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
|
|
#define __HAL_RCC_GPIOD_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIODEN))
|
|
#define __HAL_RCC_GPIOE_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOEEN))
|
|
#define __HAL_RCC_GPIOF_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOFEN))
|
|
#define __HAL_RCC_GPIOG_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOGEN))
|
|
#define __HAL_RCC_CRC_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_CRCEN))
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RCCEx_AHB1_Peripheral_Clock_Enable_Disable_Status AHB1 Peripheral Clock Enable Disable Status
|
|
* @brief Get the enable or disable status of the AHB1 peripheral clock.
|
|
* @note After reset, the peripheral clock (used for registers read/write access)
|
|
* is disabled and the application software has to enable this clock before
|
|
* using it.
|
|
* @{
|
|
*/
|
|
#define __HAL_RCC_GPIOD_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIODEN)) != RESET)
|
|
#define __HAL_RCC_GPIOE_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOEEN)) != RESET)
|
|
#define __HAL_RCC_GPIOF_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOFEN)) != RESET)
|
|
#define __HAL_RCC_GPIOG_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOGEN)) != RESET)
|
|
#define __HAL_RCC_CRC_IS_CLK_ENABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_CRCEN)) != RESET)
|
|
|
|
#define __HAL_RCC_GPIOD_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIODEN)) == RESET)
|
|
#define __HAL_RCC_GPIOE_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOEEN)) == RESET)
|
|
#define __HAL_RCC_GPIOF_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOFEN)) == RESET)
|
|
#define __HAL_RCC_GPIOG_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOGEN)) == RESET)
|
|
#define __HAL_RCC_CRC_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_CRCEN)) == RESET)
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RCCEx_AHB2_Clock_Enable_Disable AHB2 Peripheral Clock Enable Disable
|
|
* @brief Enable or disable the AHB2 peripheral clock.
|
|
* @note After reset, the peripheral clock (used for registers read/write access)
|
|
* is disabled and the application software has to enable this clock before
|
|
* using it.
|
|
* @{
|
|
*/
|
|
#define __HAL_RCC_USB_OTG_FS_CLK_ENABLE() do {(RCC->AHB2ENR |= (RCC_AHB2ENR_OTGFSEN));\
|
|
__HAL_RCC_SYSCFG_CLK_ENABLE();\
|
|
}while(0)
|
|
|
|
#define __HAL_RCC_USB_OTG_FS_CLK_DISABLE() (RCC->AHB2ENR &= ~(RCC_AHB2ENR_OTGFSEN))
|
|
|
|
#define __HAL_RCC_RNG_CLK_ENABLE() do { \
|
|
__IO uint32_t tmpreg = 0x00U; \
|
|
SET_BIT(RCC->AHB2ENR, RCC_AHB2ENR_RNGEN);\
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_RNGEN);\
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
#define __HAL_RCC_RNG_CLK_DISABLE() (RCC->AHB2ENR &= ~(RCC_AHB2ENR_RNGEN))
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RCCEx_AHB2_Peripheral_Clock_Enable_Disable_Status AHB2 Peripheral Clock Enable Disable Status
|
|
* @brief Get the enable or disable status of the AHB2 peripheral clock.
|
|
* @note After reset, the peripheral clock (used for registers read/write access)
|
|
* is disabled and the application software has to enable this clock before
|
|
* using it.
|
|
* @{
|
|
*/
|
|
#define __HAL_RCC_USB_OTG_FS_IS_CLK_ENABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_OTGFSEN)) != RESET)
|
|
#define __HAL_RCC_USB_OTG_FS_IS_CLK_DISABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_OTGFSEN)) == RESET)
|
|
|
|
#define __HAL_RCC_RNG_IS_CLK_ENABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_RNGEN)) != RESET)
|
|
#define __HAL_RCC_RNG_IS_CLK_DISABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_RNGEN)) == RESET)
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RCCEx_AHB3_Clock_Enable_Disable AHB3 Peripheral Clock Enable Disable
|
|
* @brief Enables or disables the AHB3 peripheral clock.
|
|
* @note After reset, the peripheral clock (used for registers read/write access)
|
|
* is disabled and the application software has to enable this clock before
|
|
* using it.
|
|
* @{
|
|
*/
|
|
#if defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx)
|
|
#define __HAL_RCC_FSMC_CLK_ENABLE() do { \
|
|
__IO uint32_t tmpreg = 0x00U; \
|
|
SET_BIT(RCC->AHB3ENR, RCC_AHB3ENR_FSMCEN);\
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_FSMCEN);\
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
#define __HAL_RCC_QSPI_CLK_ENABLE() do { \
|
|
__IO uint32_t tmpreg = 0x00U; \
|
|
SET_BIT(RCC->AHB3ENR, RCC_AHB3ENR_QSPIEN);\
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_QSPIEN);\
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
|
|
#define __HAL_RCC_FSMC_CLK_DISABLE() (RCC->AHB3ENR &= ~(RCC_AHB3ENR_FSMCEN))
|
|
#define __HAL_RCC_QSPI_CLK_DISABLE() (RCC->AHB3ENR &= ~(RCC_AHB3ENR_QSPIEN))
|
|
#endif /* STM32F412Zx || STM32F412Vx || STM32F412Rx */
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RCCEx_AHB3_Peripheral_Clock_Enable_Disable_Status AHB3 Peripheral Clock Enable Disable Status
|
|
* @brief Get the enable or disable status of the AHB3 peripheral clock.
|
|
* @note After reset, the peripheral clock (used for registers read/write access)
|
|
* is disabled and the application software has to enable this clock before
|
|
* using it.
|
|
* @{
|
|
*/
|
|
#if defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx)
|
|
#define __HAL_RCC_FSMC_IS_CLK_ENABLED() ((RCC->AHB3ENR & (RCC_AHB3ENR_FSMCEN)) != RESET)
|
|
#define __HAL_RCC_QSPI_IS_CLK_ENABLED() ((RCC->AHB3ENR & (RCC_AHB3ENR_QSPIEN)) != RESET)
|
|
|
|
#define __HAL_RCC_FSMC_IS_CLK_DISABLED() ((RCC->AHB3ENR & (RCC_AHB3ENR_FSMCEN)) == RESET)
|
|
#define __HAL_RCC_QSPI_IS_CLK_DISABLED() ((RCC->AHB3ENR & (RCC_AHB3ENR_QSPIEN)) == RESET)
|
|
#endif /* STM32F412Zx || STM32F412Vx || STM32F412Rx */
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RCCEx_APB1_Clock_Enable_Disable APB1 Peripheral Clock Enable Disable
|
|
* @brief Enable or disable the Low Speed APB (APB1) peripheral clock.
|
|
* @note After reset, the peripheral clock (used for registers read/write access)
|
|
* is disabled and the application software has to enable this clock before
|
|
* using it.
|
|
* @{
|
|
*/
|
|
#define __HAL_RCC_TIM6_CLK_ENABLE() do { \
|
|
__IO uint32_t tmpreg = 0x00U; \
|
|
SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM6EN);\
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM6EN);\
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
#define __HAL_RCC_TIM7_CLK_ENABLE() do { \
|
|
__IO uint32_t tmpreg = 0x00U; \
|
|
SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM7EN);\
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM7EN);\
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
#define __HAL_RCC_TIM12_CLK_ENABLE() do { \
|
|
__IO uint32_t tmpreg = 0x00U; \
|
|
SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM12EN);\
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM12EN);\
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
#define __HAL_RCC_TIM13_CLK_ENABLE() do { \
|
|
__IO uint32_t tmpreg = 0x00U; \
|
|
SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM13EN);\
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM13EN);\
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
#define __HAL_RCC_TIM14_CLK_ENABLE() do { \
|
|
__IO uint32_t tmpreg = 0x00U; \
|
|
SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM14EN);\
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM14EN);\
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
#define __HAL_RCC_RTCAPB_CLK_ENABLE() do { \
|
|
__IO uint32_t tmpreg = 0x00U; \
|
|
SET_BIT(RCC->APB1ENR, RCC_APB1ENR_RTCAPBEN);\
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_RTCAPBEN);\
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
#if defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx)
|
|
#define __HAL_RCC_USART3_CLK_ENABLE() do { \
|
|
__IO uint32_t tmpreg = 0x00U; \
|
|
SET_BIT(RCC->APB1ENR, RCC_APB1ENR_USART3EN);\
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_USART3EN);\
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
#endif /* STM32F412Zx || STM32F412Vx || STM32F412Rx */
|
|
#define __HAL_RCC_FMPI2C1_CLK_ENABLE() do { \
|
|
__IO uint32_t tmpreg = 0x00U; \
|
|
SET_BIT(RCC->APB1ENR, RCC_APB1ENR_FMPI2C1EN);\
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_FMPI2C1EN);\
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
#define __HAL_RCC_CAN1_CLK_ENABLE() do { \
|
|
__IO uint32_t tmpreg = 0x00U; \
|
|
SET_BIT(RCC->APB1ENR, RCC_APB1ENR_CAN1EN);\
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_CAN1EN);\
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
#define __HAL_RCC_CAN2_CLK_ENABLE() do { \
|
|
__IO uint32_t tmpreg = 0x00U; \
|
|
SET_BIT(RCC->APB1ENR, RCC_APB1ENR_CAN2EN);\
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_CAN2EN);\
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
#define __HAL_RCC_TIM2_CLK_ENABLE() do { \
|
|
__IO uint32_t tmpreg = 0x00U; \
|
|
SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM2EN);\
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM2EN);\
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
#define __HAL_RCC_TIM3_CLK_ENABLE() do { \
|
|
__IO uint32_t tmpreg = 0x00U; \
|
|
SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM3EN);\
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM3EN);\
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
#define __HAL_RCC_TIM4_CLK_ENABLE() do { \
|
|
__IO uint32_t tmpreg = 0x00U; \
|
|
SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM4EN);\
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM4EN);\
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
#define __HAL_RCC_SPI3_CLK_ENABLE() do { \
|
|
__IO uint32_t tmpreg = 0x00U; \
|
|
SET_BIT(RCC->APB1ENR, RCC_APB1ENR_SPI3EN);\
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_SPI3EN);\
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
#define __HAL_RCC_I2C3_CLK_ENABLE() do { \
|
|
__IO uint32_t tmpreg = 0x00U; \
|
|
SET_BIT(RCC->APB1ENR, RCC_APB1ENR_I2C3EN);\
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_I2C3EN);\
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
#define __HAL_RCC_TIM2_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM2EN))
|
|
#define __HAL_RCC_TIM3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM3EN))
|
|
#define __HAL_RCC_TIM4_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM4EN))
|
|
#define __HAL_RCC_SPI3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_SPI3EN))
|
|
#define __HAL_RCC_I2C3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_I2C3EN))
|
|
#define __HAL_RCC_TIM6_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM6EN))
|
|
#define __HAL_RCC_TIM7_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM7EN))
|
|
#define __HAL_RCC_TIM12_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM12EN))
|
|
#define __HAL_RCC_TIM13_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM13EN))
|
|
#define __HAL_RCC_TIM14_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM14EN))
|
|
#define __HAL_RCC_RTCAPB_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_RTCAPBEN))
|
|
#if defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx)
|
|
#define __HAL_RCC_USART3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_USART3EN))
|
|
#endif /* STM32F412Zx || STM32F412Vx || STM32F412Rx */
|
|
#define __HAL_RCC_FMPI2C1_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_FMPI2C1EN))
|
|
#define __HAL_RCC_CAN1_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_CAN1EN))
|
|
#define __HAL_RCC_CAN2_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_CAN2EN))
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RCCEx_APB1_Peripheral_Clock_Enable_Disable_Status APB1 Peripheral Clock Enable Disable Status
|
|
* @brief Get the enable or disable status of the APB1 peripheral clock.
|
|
* @note After reset, the peripheral clock (used for registers read/write access)
|
|
* is disabled and the application software has to enable this clock before
|
|
* using it.
|
|
* @{
|
|
*/
|
|
#define __HAL_RCC_TIM2_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM2EN)) != RESET)
|
|
#define __HAL_RCC_TIM3_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM3EN)) != RESET)
|
|
#define __HAL_RCC_TIM4_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM4EN)) != RESET)
|
|
#define __HAL_RCC_SPI3_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_SPI3EN)) != RESET)
|
|
#define __HAL_RCC_I2C3_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_I2C3EN)) != RESET)
|
|
#define __HAL_RCC_TIM6_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM6EN)) != RESET)
|
|
#define __HAL_RCC_TIM7_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM7EN)) != RESET)
|
|
#define __HAL_RCC_TIM12_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM12EN)) != RESET)
|
|
#define __HAL_RCC_TIM13_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM13EN)) != RESET)
|
|
#define __HAL_RCC_TIM14_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM14EN)) != RESET)
|
|
#define __HAL_RCC_RTCAPB_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_RTCAPBEN)) != RESET)
|
|
#if defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx)
|
|
#define __HAL_RCC_USART3_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_USART3EN)) != RESET)
|
|
#endif /* STM32F412Zx || STM32F412Vx || STM32F412Rx */
|
|
#define __HAL_RCC_FMPI2C1_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_FMPI2C1EN)) != RESET)
|
|
#define __HAL_RCC_CAN1_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_CAN1EN))!= RESET)
|
|
#define __HAL_RCC_CAN2_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_CAN2EN)) != RESET)
|
|
|
|
#define __HAL_RCC_TIM2_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM2EN)) == RESET)
|
|
#define __HAL_RCC_TIM3_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM3EN)) == RESET)
|
|
#define __HAL_RCC_TIM4_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM4EN)) == RESET)
|
|
#define __HAL_RCC_SPI3_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_SPI3EN)) == RESET)
|
|
#define __HAL_RCC_I2C3_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_I2C3EN)) == RESET)
|
|
#define __HAL_RCC_TIM6_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM6EN)) == RESET)
|
|
#define __HAL_RCC_TIM7_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM7EN)) == RESET)
|
|
#define __HAL_RCC_TIM12_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM12EN)) == RESET)
|
|
#define __HAL_RCC_TIM13_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM13EN)) == RESET)
|
|
#define __HAL_RCC_TIM14_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM14EN)) == RESET)
|
|
#define __HAL_RCC_RTCAPB_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_RTCAPBEN)) == RESET)
|
|
#if defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx)
|
|
#define __HAL_RCC_USART3_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_USART3EN)) == RESET)
|
|
#endif /* STM32F412Zx || STM32F412Vx || STM32F412Rx */
|
|
#define __HAL_RCC_FMPI2C1_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_FMPI2C1EN)) == RESET)
|
|
#define __HAL_RCC_CAN1_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_CAN1EN)) == RESET)
|
|
#define __HAL_RCC_CAN2_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_CAN2EN)) == RESET)
|
|
/**
|
|
* @}
|
|
*/
|
|
/** @defgroup RCCEx_APB2_Clock_Enable_Disable APB2 Peripheral Clock Enable Disable
|
|
* @brief Enable or disable the High Speed APB (APB2) peripheral clock.
|
|
* @note After reset, the peripheral clock (used for registers read/write access)
|
|
* is disabled and the application software has to enable this clock before
|
|
* using it.
|
|
* @{
|
|
*/
|
|
#define __HAL_RCC_TIM8_CLK_ENABLE() do { \
|
|
__IO uint32_t tmpreg = 0x00U; \
|
|
SET_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM8EN);\
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM8EN);\
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
#define __HAL_RCC_SPI5_CLK_ENABLE() do { \
|
|
__IO uint32_t tmpreg = 0x00U; \
|
|
SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI5EN);\
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI5EN);\
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
#define __HAL_RCC_EXTIT_CLK_ENABLE() do { \
|
|
__IO uint32_t tmpreg = 0x00U; \
|
|
SET_BIT(RCC->APB2ENR, RCC_APB2ENR_EXTITEN);\
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_EXTITEN);\
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
#define __HAL_RCC_DFSDM1_CLK_ENABLE() do { \
|
|
__IO uint32_t tmpreg = 0x00U; \
|
|
SET_BIT(RCC->APB2ENR, RCC_APB2ENR_DFSDM1EN);\
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_DFSDM1EN);\
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
#define __HAL_RCC_SDIO_CLK_ENABLE() do { \
|
|
__IO uint32_t tmpreg = 0x00U; \
|
|
SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SDIOEN);\
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SDIOEN);\
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
#define __HAL_RCC_SPI4_CLK_ENABLE() do { \
|
|
__IO uint32_t tmpreg = 0x00U; \
|
|
SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI4EN);\
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI4EN);\
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
#define __HAL_RCC_TIM10_CLK_ENABLE() do { \
|
|
__IO uint32_t tmpreg = 0x00U; \
|
|
SET_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM10EN);\
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM10EN);\
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
#define __HAL_RCC_SDIO_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SDIOEN))
|
|
#define __HAL_RCC_SPI4_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SPI4EN))
|
|
#define __HAL_RCC_TIM10_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_TIM10EN))
|
|
#define __HAL_RCC_TIM8_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_TIM8EN))
|
|
#define __HAL_RCC_SPI5_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SPI5EN))
|
|
#define __HAL_RCC_EXTIT_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_EXTITEN))
|
|
#define __HAL_RCC_DFSDM1_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_DFSDM1EN))
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RCCEx_APB2_Peripheral_Clock_Enable_Disable_Status APB2 Peripheral Clock Enable Disable Status
|
|
* @brief Get the enable or disable status of the APB2 peripheral clock.
|
|
* @note After reset, the peripheral clock (used for registers read/write access)
|
|
* is disabled and the application software has to enable this clock before
|
|
* using it.
|
|
* @{
|
|
*/
|
|
#define __HAL_RCC_SDIO_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SDIOEN)) != RESET)
|
|
#define __HAL_RCC_SPI4_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SPI4EN)) != RESET)
|
|
#define __HAL_RCC_TIM10_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM10EN)) != RESET)
|
|
#define __HAL_RCC_TIM8_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM8EN)) != RESET)
|
|
#define __HAL_RCC_SPI5_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SPI5EN)) != RESET)
|
|
#define __HAL_RCC_EXTIT_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_EXTITEN)) != RESET)
|
|
#define __HAL_RCC_DFSDM1_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_DFSDM1EN)) != RESET)
|
|
|
|
#define __HAL_RCC_SDIO_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SDIOEN)) == RESET)
|
|
#define __HAL_RCC_SPI4_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SPI4EN)) == RESET)
|
|
#define __HAL_RCC_TIM10_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM10EN)) == RESET)
|
|
#define __HAL_RCC_TIM8_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM8EN)) == RESET)
|
|
#define __HAL_RCC_SPI5_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SPI5EN)) == RESET)
|
|
#define __HAL_RCC_EXTIT_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_EXTITEN)) == RESET)
|
|
#define __HAL_RCC_DFSDM1_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_DFSDM1EN)) == RESET)
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RCCEx_AHB1_Force_Release_Reset AHB1 Force Release Reset
|
|
* @brief Force or release AHB1 peripheral reset.
|
|
* @{
|
|
*/
|
|
#define __HAL_RCC_GPIOD_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIODRST))
|
|
#define __HAL_RCC_GPIOE_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOERST))
|
|
#define __HAL_RCC_GPIOF_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOFRST))
|
|
#define __HAL_RCC_GPIOG_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOGRST))
|
|
#define __HAL_RCC_CRC_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_CRCRST))
|
|
|
|
#define __HAL_RCC_GPIOD_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIODRST))
|
|
#define __HAL_RCC_GPIOE_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOERST))
|
|
#define __HAL_RCC_GPIOF_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOFRST))
|
|
#define __HAL_RCC_GPIOG_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOGRST))
|
|
#define __HAL_RCC_CRC_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_CRCRST))
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RCCEx_AHB2_Force_Release_Reset AHB2 Force Release Reset
|
|
* @brief Force or release AHB2 peripheral reset.
|
|
* @{
|
|
*/
|
|
#define __HAL_RCC_AHB2_FORCE_RESET() (RCC->AHB2RSTR = 0xFFFFFFFFU)
|
|
#define __HAL_RCC_AHB2_RELEASE_RESET() (RCC->AHB2RSTR = 0x00U)
|
|
|
|
#define __HAL_RCC_USB_OTG_FS_FORCE_RESET() (RCC->AHB2RSTR |= (RCC_AHB2RSTR_OTGFSRST))
|
|
#define __HAL_RCC_USB_OTG_FS_RELEASE_RESET() (RCC->AHB2RSTR &= ~(RCC_AHB2RSTR_OTGFSRST))
|
|
|
|
#define __HAL_RCC_RNG_FORCE_RESET() (RCC->AHB2RSTR |= (RCC_AHB2RSTR_RNGRST))
|
|
#define __HAL_RCC_RNG_RELEASE_RESET() (RCC->AHB2RSTR &= ~(RCC_AHB2RSTR_RNGRST))
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RCCEx_AHB3_Force_Release_Reset AHB3 Force Release Reset
|
|
* @brief Force or release AHB3 peripheral reset.
|
|
* @{
|
|
*/
|
|
#if defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx)
|
|
#define __HAL_RCC_AHB3_FORCE_RESET() (RCC->AHB3RSTR = 0xFFFFFFFFU)
|
|
#define __HAL_RCC_AHB3_RELEASE_RESET() (RCC->AHB3RSTR = 0x00U)
|
|
|
|
#define __HAL_RCC_FSMC_FORCE_RESET() (RCC->AHB3RSTR |= (RCC_AHB3RSTR_FSMCRST))
|
|
#define __HAL_RCC_QSPI_FORCE_RESET() (RCC->AHB3RSTR |= (RCC_AHB3RSTR_QSPIRST))
|
|
|
|
#define __HAL_RCC_FSMC_RELEASE_RESET() (RCC->AHB3RSTR &= ~(RCC_AHB3RSTR_FSMCRST))
|
|
#define __HAL_RCC_QSPI_RELEASE_RESET() (RCC->AHB3RSTR &= ~(RCC_AHB3RSTR_QSPIRST))
|
|
#endif /* STM32F412Zx || STM32F412Vx || STM32F412Rx */
|
|
#if defined(STM32F412Cx)
|
|
#define __HAL_RCC_AHB3_FORCE_RESET()
|
|
#define __HAL_RCC_AHB3_RELEASE_RESET()
|
|
|
|
#define __HAL_RCC_FSMC_FORCE_RESET()
|
|
#define __HAL_RCC_QSPI_FORCE_RESET()
|
|
|
|
#define __HAL_RCC_FSMC_RELEASE_RESET()
|
|
#define __HAL_RCC_QSPI_RELEASE_RESET()
|
|
#endif /* STM32F412Cx */
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RCCEx_APB1_Force_Release_Reset APB1 Force Release Reset
|
|
* @brief Force or release APB1 peripheral reset.
|
|
* @{
|
|
*/
|
|
#define __HAL_RCC_TIM6_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM6RST))
|
|
#define __HAL_RCC_TIM7_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM7RST))
|
|
#define __HAL_RCC_TIM12_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM12RST))
|
|
#define __HAL_RCC_TIM13_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM13RST))
|
|
#define __HAL_RCC_TIM14_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM14RST))
|
|
#if defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx)
|
|
#define __HAL_RCC_USART3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_USART3RST))
|
|
#endif /* STM32F412Zx || STM32F412Vx || STM32F412Rx */
|
|
#define __HAL_RCC_FMPI2C1_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_FMPI2C1RST))
|
|
#define __HAL_RCC_CAN1_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_CAN1RST))
|
|
#define __HAL_RCC_CAN2_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_CAN2RST))
|
|
#define __HAL_RCC_TIM2_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM2RST))
|
|
#define __HAL_RCC_TIM3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM3RST))
|
|
#define __HAL_RCC_TIM4_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM4RST))
|
|
#define __HAL_RCC_SPI3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_SPI3RST))
|
|
#define __HAL_RCC_I2C3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_I2C3RST))
|
|
|
|
#define __HAL_RCC_TIM2_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM2RST))
|
|
#define __HAL_RCC_TIM3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM3RST))
|
|
#define __HAL_RCC_TIM4_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM4RST))
|
|
#define __HAL_RCC_SPI3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_SPI3RST))
|
|
#define __HAL_RCC_I2C3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_I2C3RST))
|
|
#define __HAL_RCC_TIM6_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM6RST))
|
|
#define __HAL_RCC_TIM7_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM7RST))
|
|
#define __HAL_RCC_TIM12_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM12RST))
|
|
#define __HAL_RCC_TIM13_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM13RST))
|
|
#define __HAL_RCC_TIM14_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM14RST))
|
|
#if defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx)
|
|
#define __HAL_RCC_USART3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_USART3RST))
|
|
#endif /* STM32F412Zx || STM32F412Vx || STM32F412Rx */
|
|
#define __HAL_RCC_FMPI2C1_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_FMPI2C1RST))
|
|
#define __HAL_RCC_CAN1_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_CAN1RST))
|
|
#define __HAL_RCC_CAN2_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_CAN2RST))
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RCCEx_APB2_Force_Release_Reset APB2 Force Release Reset
|
|
* @brief Force or release APB2 peripheral reset.
|
|
* @{
|
|
*/
|
|
#define __HAL_RCC_TIM8_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM8RST))
|
|
#define __HAL_RCC_SPI5_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SPI5RST))
|
|
#define __HAL_RCC_DFSDM1_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_DFSDM1RST))
|
|
#define __HAL_RCC_SDIO_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SDIORST))
|
|
#define __HAL_RCC_SPI4_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SPI4RST))
|
|
#define __HAL_RCC_TIM10_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM10RST))
|
|
|
|
#define __HAL_RCC_SDIO_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SDIORST))
|
|
#define __HAL_RCC_SPI4_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SPI4RST))
|
|
#define __HAL_RCC_TIM10_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_TIM10RST))
|
|
#define __HAL_RCC_TIM8_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_TIM8RST))
|
|
#define __HAL_RCC_SPI5_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SPI5RST))
|
|
#define __HAL_RCC_DFSDM1_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_DFSDM1RST))
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RCCEx_AHB1_LowPower_Enable_Disable AHB1 Peripheral Low Power Enable Disable
|
|
* @brief Enable or disable the AHB1 peripheral clock during Low Power (Sleep) mode.
|
|
* @note Peripheral clock gating in SLEEP mode can be used to further reduce
|
|
* power consumption.
|
|
* @note After wakeup from SLEEP mode, the peripheral clock is enabled again.
|
|
* @note By default, all peripheral clocks are enabled during SLEEP mode.
|
|
* @{
|
|
*/
|
|
#define __HAL_RCC_GPIOD_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIODLPEN))
|
|
#define __HAL_RCC_GPIOE_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOELPEN))
|
|
#define __HAL_RCC_GPIOF_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOFLPEN))
|
|
#define __HAL_RCC_GPIOG_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOGLPEN))
|
|
#define __HAL_RCC_CRC_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_CRCLPEN))
|
|
#define __HAL_RCC_FLITF_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_FLITFLPEN))
|
|
#define __HAL_RCC_SRAM1_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_SRAM1LPEN))
|
|
|
|
#define __HAL_RCC_GPIOD_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIODLPEN))
|
|
#define __HAL_RCC_GPIOE_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOELPEN))
|
|
#define __HAL_RCC_GPIOF_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOFLPEN))
|
|
#define __HAL_RCC_GPIOG_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOGLPEN))
|
|
#define __HAL_RCC_CRC_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_CRCLPEN))
|
|
#define __HAL_RCC_FLITF_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_FLITFLPEN))
|
|
#define __HAL_RCC_SRAM1_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_SRAM1LPEN))
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RCCEx_AHB2_LowPower_Enable_Disable AHB2 Peripheral Low Power Enable Disable
|
|
* @brief Enable or disable the AHB2 peripheral clock during Low Power (Sleep) mode.
|
|
* @note Peripheral clock gating in SLEEP mode can be used to further reduce
|
|
* power consumption.
|
|
* @note After wake-up from SLEEP mode, the peripheral clock is enabled again.
|
|
* @note By default, all peripheral clocks are enabled during SLEEP mode.
|
|
* @{
|
|
*/
|
|
#define __HAL_RCC_USB_OTG_FS_CLK_SLEEP_ENABLE() (RCC->AHB2LPENR |= (RCC_AHB2LPENR_OTGFSLPEN))
|
|
|
|
#define __HAL_RCC_USB_OTG_FS_CLK_SLEEP_DISABLE() (RCC->AHB2LPENR &= ~(RCC_AHB2LPENR_OTGFSLPEN))
|
|
|
|
#define __HAL_RCC_RNG_CLK_SLEEP_ENABLE() (RCC->AHB2LPENR |= (RCC_AHB2LPENR_RNGLPEN))
|
|
#define __HAL_RCC_RNG_CLK_SLEEP_DISABLE() (RCC->AHB2LPENR &= ~(RCC_AHB2LPENR_RNGLPEN))
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RCCEx_AHB3_LowPower_Enable_Disable AHB3 Peripheral Low Power Enable Disable
|
|
* @brief Enable or disable the AHB3 peripheral clock during Low Power (Sleep) mode.
|
|
* @note Peripheral clock gating in SLEEP mode can be used to further reduce
|
|
* power consumption.
|
|
* @note After wakeup from SLEEP mode, the peripheral clock is enabled again.
|
|
* @note By default, all peripheral clocks are enabled during SLEEP mode.
|
|
* @{
|
|
*/
|
|
#if defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx)
|
|
#define __HAL_RCC_FSMC_CLK_SLEEP_ENABLE() (RCC->AHB3LPENR |= (RCC_AHB3LPENR_FSMCLPEN))
|
|
#define __HAL_RCC_QSPI_CLK_SLEEP_ENABLE() (RCC->AHB3LPENR |= (RCC_AHB3LPENR_QSPILPEN))
|
|
|
|
#define __HAL_RCC_FSMC_CLK_SLEEP_DISABLE() (RCC->AHB3LPENR &= ~(RCC_AHB3LPENR_FSMCLPEN))
|
|
#define __HAL_RCC_QSPI_CLK_SLEEP_DISABLE() (RCC->AHB3LPENR &= ~(RCC_AHB3LPENR_QSPILPEN))
|
|
#endif /* STM32F412Zx || STM32F412Vx || STM32F412Rx */
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RCCEx_APB1_LowPower_Enable_Disable APB1 Peripheral Low Power Enable Disable
|
|
* @brief Enable or disable the APB1 peripheral clock during Low Power (Sleep) mode.
|
|
* @note Peripheral clock gating in SLEEP mode can be used to further reduce
|
|
* power consumption.
|
|
* @note After wakeup from SLEEP mode, the peripheral clock is enabled again.
|
|
* @note By default, all peripheral clocks are enabled during SLEEP mode.
|
|
* @{
|
|
*/
|
|
#define __HAL_RCC_TIM6_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM6LPEN))
|
|
#define __HAL_RCC_TIM7_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM7LPEN))
|
|
#define __HAL_RCC_TIM12_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM12LPEN))
|
|
#define __HAL_RCC_TIM13_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM13LPEN))
|
|
#define __HAL_RCC_TIM14_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM14LPEN))
|
|
#define __HAL_RCC_RTCAPB_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_RTCAPBLPEN))
|
|
#if defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx)
|
|
#define __HAL_RCC_USART3_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_USART3LPEN))
|
|
#endif /* STM32F412Zx || STM32F412Vx || STM32F412Rx */
|
|
#define __HAL_RCC_FMPI2C1_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_FMPI2C1LPEN))
|
|
#define __HAL_RCC_CAN1_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_CAN1LPEN))
|
|
#define __HAL_RCC_CAN2_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_CAN2LPEN))
|
|
#define __HAL_RCC_TIM2_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM2LPEN))
|
|
#define __HAL_RCC_TIM3_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM3LPEN))
|
|
#define __HAL_RCC_TIM4_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM4LPEN))
|
|
#define __HAL_RCC_SPI3_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_SPI3LPEN))
|
|
#define __HAL_RCC_I2C3_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_I2C3LPEN))
|
|
|
|
#define __HAL_RCC_TIM2_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM2LPEN))
|
|
#define __HAL_RCC_TIM3_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM3LPEN))
|
|
#define __HAL_RCC_TIM4_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM4LPEN))
|
|
#define __HAL_RCC_SPI3_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_SPI3LPEN))
|
|
#define __HAL_RCC_I2C3_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_I2C3LPEN))
|
|
#define __HAL_RCC_TIM6_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM6LPEN))
|
|
#define __HAL_RCC_TIM7_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM7LPEN))
|
|
#define __HAL_RCC_TIM12_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM12LPEN))
|
|
#define __HAL_RCC_TIM13_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM13LPEN))
|
|
#define __HAL_RCC_TIM14_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM14LPEN))
|
|
#define __HAL_RCC_RTCAPB_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_RTCAPBLPEN))
|
|
#if defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx)
|
|
#define __HAL_RCC_USART3_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_USART3LPEN))
|
|
#endif /* STM32F412Zx || STM32F412Vx || STM32F412Rx */
|
|
#define __HAL_RCC_FMPI2C1_CLK_SLEEP_DISABLE()(RCC->APB1LPENR &= ~(RCC_APB1LPENR_FMPI2C1LPEN))
|
|
#define __HAL_RCC_CAN1_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_CAN1LPEN))
|
|
#define __HAL_RCC_CAN2_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_CAN2LPEN))
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RCCEx_APB2_LowPower_Enable_Disable APB2 Peripheral Low Power Enable Disable
|
|
* @brief Enable or disable the APB2 peripheral clock during Low Power (Sleep) mode.
|
|
* @note Peripheral clock gating in SLEEP mode can be used to further reduce
|
|
* power consumption.
|
|
* @note After wakeup from SLEEP mode, the peripheral clock is enabled again.
|
|
* @note By default, all peripheral clocks are enabled during SLEEP mode.
|
|
* @{
|
|
*/
|
|
#define __HAL_RCC_TIM8_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_TIM8LPEN))
|
|
#define __HAL_RCC_SPI5_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_SPI5LPEN))
|
|
#define __HAL_RCC_EXTIT_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_EXTITLPEN))
|
|
#define __HAL_RCC_DFSDM1_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_DFSDM1LPEN))
|
|
#define __HAL_RCC_SDIO_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_SDIOLPEN))
|
|
#define __HAL_RCC_SPI4_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_SPI4LPEN))
|
|
#define __HAL_RCC_TIM10_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_TIM10LPEN))
|
|
|
|
#define __HAL_RCC_SDIO_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_SDIOLPEN))
|
|
#define __HAL_RCC_SPI4_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_SPI4LPEN))
|
|
#define __HAL_RCC_TIM10_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_TIM10LPEN))
|
|
#define __HAL_RCC_TIM8_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_TIM8LPEN))
|
|
#define __HAL_RCC_SPI5_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_SPI5LPEN))
|
|
#define __HAL_RCC_EXTIT_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_EXTITLPEN))
|
|
#define __HAL_RCC_DFSDM1_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_DFSDM1LPEN))
|
|
/**
|
|
* @}
|
|
*/
|
|
#endif /* STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx */
|
|
/*----------------------------------------------------------------------------*/
|
|
|
|
/*------------------------------- PLL Configuration --------------------------*/
|
|
#if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) || defined(STM32F446xx) ||\
|
|
defined(STM32F469xx) || defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || \
|
|
defined(STM32F412Rx) || defined(STM32F412Cx)
|
|
/** @brief Macro to configure the main PLL clock source, multiplication and division factors.
|
|
* @note This function must be used only when the main PLL is disabled.
|
|
* @param __RCC_PLLSource__: specifies the PLL entry clock source.
|
|
* This parameter can be one of the following values:
|
|
* @arg RCC_PLLSOURCE_HSI: HSI oscillator clock selected as PLL clock entry
|
|
* @arg RCC_PLLSOURCE_HSE: HSE oscillator clock selected as PLL clock entry
|
|
* @note This clock source (RCC_PLLSource) is common for the main PLL and PLLI2S.
|
|
* @param __PLLM__: specifies the division factor for PLL VCO input clock
|
|
* This parameter must be a number between Min_Data = 2 and Max_Data = 63.
|
|
* @note You have to set the PLLM parameter correctly to ensure that the VCO input
|
|
* frequency ranges from 1 to 2 MHz. It is recommended to select a frequency
|
|
* of 2 MHz to limit PLL jitter.
|
|
* @param __PLLN__: specifies the multiplication factor for PLL VCO output clock
|
|
* This parameter must be a number between Min_Data = 50 and Max_Data = 432.
|
|
* @note You have to set the PLLN parameter correctly to ensure that the VCO
|
|
* output frequency is between 100 and 432 MHz.
|
|
*
|
|
* @param __PLLP__: specifies the division factor for main system clock (SYSCLK)
|
|
* This parameter must be a number in the range {2, 4, 6, or 8}.
|
|
*
|
|
* @param __PLLQ__: specifies the division factor for OTG FS, SDIO and RNG clocks
|
|
* This parameter must be a number between Min_Data = 2 and Max_Data = 15.
|
|
* @note If the USB OTG FS is used in your application, you have to set the
|
|
* PLLQ parameter correctly to have 48 MHz clock for the USB. However,
|
|
* the SDIO and RNG need a frequency lower than or equal to 48 MHz to work
|
|
* correctly.
|
|
*
|
|
* @param __PLLR__: PLL division factor for I2S, SAI, SYSTEM, SPDIFRX clocks.
|
|
* This parameter must be a number between Min_Data = 2 and Max_Data = 7.
|
|
* @note This parameter is only available in STM32F446xx/STM32F469xx/STM32F479xx/
|
|
STM32F412Zx/STM32F412Vx/STM32F412Rx/STM32F412Cx devices.
|
|
*
|
|
*/
|
|
#define __HAL_RCC_PLL_CONFIG(__RCC_PLLSource__, __PLLM__, __PLLN__, __PLLP__, __PLLQ__,__PLLR__) \
|
|
(RCC->PLLCFGR = ((__RCC_PLLSource__) | (__PLLM__) | \
|
|
((__PLLN__) << POSITION_VAL(RCC_PLLCFGR_PLLN)) | \
|
|
((((__PLLP__) >> 1) -1) << POSITION_VAL(RCC_PLLCFGR_PLLP)) | \
|
|
((__PLLQ__) << POSITION_VAL(RCC_PLLCFGR_PLLQ)) | \
|
|
((__PLLR__) << POSITION_VAL(RCC_PLLCFGR_PLLR))))
|
|
#else
|
|
/** @brief Macro to configure the main PLL clock source, multiplication and division factors.
|
|
* @note This function must be used only when the main PLL is disabled.
|
|
* @param __RCC_PLLSource__: specifies the PLL entry clock source.
|
|
* This parameter can be one of the following values:
|
|
* @arg RCC_PLLSOURCE_HSI: HSI oscillator clock selected as PLL clock entry
|
|
* @arg RCC_PLLSOURCE_HSE: HSE oscillator clock selected as PLL clock entry
|
|
* @note This clock source (RCC_PLLSource) is common for the main PLL and PLLI2S.
|
|
* @param __PLLM__: specifies the division factor for PLL VCO input clock
|
|
* This parameter must be a number between Min_Data = 2 and Max_Data = 63.
|
|
* @note You have to set the PLLM parameter correctly to ensure that the VCO input
|
|
* frequency ranges from 1 to 2 MHz. It is recommended to select a frequency
|
|
* of 2 MHz to limit PLL jitter.
|
|
* @param __PLLN__: specifies the multiplication factor for PLL VCO output clock
|
|
* This parameter must be a number between Min_Data = 50 and Max_Data = 432
|
|
* Except for STM32F411xE devices where Min_Data = 192.
|
|
* @note You have to set the PLLN parameter correctly to ensure that the VCO
|
|
* output frequency is between 100 and 432 MHz, Except for STM32F411xE devices
|
|
* where frequency is between 192 and 432 MHz.
|
|
* @param __PLLP__: specifies the division factor for main system clock (SYSCLK)
|
|
* This parameter must be a number in the range {2, 4, 6, or 8}.
|
|
*
|
|
* @param __PLLQ__: specifies the division factor for OTG FS, SDIO and RNG clocks
|
|
* This parameter must be a number between Min_Data = 2 and Max_Data = 15.
|
|
* @note If the USB OTG FS is used in your application, you have to set the
|
|
* PLLQ parameter correctly to have 48 MHz clock for the USB. However,
|
|
* the SDIO and RNG need a frequency lower than or equal to 48 MHz to work
|
|
* correctly.
|
|
*
|
|
*/
|
|
#define __HAL_RCC_PLL_CONFIG(__RCC_PLLSource__, __PLLM__, __PLLN__, __PLLP__, __PLLQ__) \
|
|
(RCC->PLLCFGR = (0x20000000U | (__RCC_PLLSource__) | (__PLLM__)| \
|
|
((__PLLN__) << POSITION_VAL(RCC_PLLCFGR_PLLN)) | \
|
|
((((__PLLP__) >> 1) -1) << POSITION_VAL(RCC_PLLCFGR_PLLP)) | \
|
|
((__PLLQ__) << POSITION_VAL(RCC_PLLCFGR_PLLQ))))
|
|
#endif /* STM32F410xx || STM32F446xx || STM32F469xx || STM32F479xx || STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx */
|
|
/*----------------------------------------------------------------------------*/
|
|
|
|
/*----------------------------PLLI2S Configuration ---------------------------*/
|
|
#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) || \
|
|
defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || \
|
|
defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE) || defined(STM32F446xx) || \
|
|
defined(STM32F469xx) || defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || \
|
|
defined(STM32F412Rx) || defined(STM32F412Cx)
|
|
|
|
/** @brief Macros to enable or disable the PLLI2S.
|
|
* @note The PLLI2S is disabled by hardware when entering STOP and STANDBY modes.
|
|
*/
|
|
#define __HAL_RCC_PLLI2S_ENABLE() (*(__IO uint32_t *) RCC_CR_PLLI2SON_BB = ENABLE)
|
|
#define __HAL_RCC_PLLI2S_DISABLE() (*(__IO uint32_t *) RCC_CR_PLLI2SON_BB = DISABLE)
|
|
|
|
#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx ||
|
|
STM32F401xC || STM32F401xE || STM32F411xE || STM32F446xx || STM32F469xx || STM32F479xx || STM32F412Zx || STM32F412Vx ||
|
|
STM32F412Rx || STM32F412Cx */
|
|
#if defined(STM32F446xx)
|
|
/** @brief Macro to configure the PLLI2S clock multiplication and division factors .
|
|
* @note This macro must be used only when the PLLI2S is disabled.
|
|
* @note PLLI2S clock source is common with the main PLL (configured in
|
|
* HAL_RCC_ClockConfig() API).
|
|
* @param __PLLI2SM__: specifies the division factor for PLLI2S VCO input clock
|
|
* This parameter must be a number between Min_Data = 2 and Max_Data = 63.
|
|
* @note You have to set the PLLI2SM parameter correctly to ensure that the VCO input
|
|
* frequency ranges from 1 to 2 MHz. It is recommended to select a frequency
|
|
* of 1 MHz to limit PLLI2S jitter.
|
|
*
|
|
* @param __PLLI2SN__: specifies the multiplication factor for PLLI2S VCO output clock
|
|
* This parameter must be a number between Min_Data = 50 and Max_Data = 432.
|
|
* @note You have to set the PLLI2SN parameter correctly to ensure that the VCO
|
|
* output frequency is between Min_Data = 100 and Max_Data = 432 MHz.
|
|
*
|
|
* @param __PLLI2SP__: specifies division factor for SPDIFRX Clock.
|
|
* This parameter must be a number in the range {2, 4, 6, or 8}.
|
|
* @note the PLLI2SP parameter is only available with STM32F446xx Devices
|
|
*
|
|
* @param __PLLI2SR__: specifies the division factor for I2S clock
|
|
* This parameter must be a number between Min_Data = 2 and Max_Data = 7.
|
|
* @note You have to set the PLLI2SR parameter correctly to not exceed 192 MHz
|
|
* on the I2S clock frequency.
|
|
*
|
|
* @param __PLLI2SQ__: specifies the division factor for SAI clock
|
|
* This parameter must be a number between Min_Data = 2 and Max_Data = 15.
|
|
*/
|
|
#define __HAL_RCC_PLLI2S_CONFIG(__PLLI2SM__, __PLLI2SN__, __PLLI2SP__, __PLLI2SQ__, __PLLI2SR__) \
|
|
(RCC->PLLI2SCFGR = ((__PLLI2SM__) |\
|
|
((__PLLI2SN__) << POSITION_VAL(RCC_PLLI2SCFGR_PLLI2SN)) |\
|
|
((((__PLLI2SP__) >> 1) -1) << POSITION_VAL(RCC_PLLI2SCFGR_PLLI2SP)) |\
|
|
((__PLLI2SQ__) << POSITION_VAL(RCC_PLLI2SCFGR_PLLI2SQ)) |\
|
|
((__PLLI2SR__) << POSITION_VAL(RCC_PLLI2SCFGR_PLLI2SR))))
|
|
#elif defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx)
|
|
/** @brief Macro to configure the PLLI2S clock multiplication and division factors .
|
|
* @note This macro must be used only when the PLLI2S is disabled.
|
|
* @note PLLI2S clock source is common with the main PLL (configured in
|
|
* HAL_RCC_ClockConfig() API).
|
|
* @param __PLLI2SM__: specifies the division factor for PLLI2S VCO input clock
|
|
* This parameter must be a number between Min_Data = 2 and Max_Data = 63.
|
|
* @note You have to set the PLLI2SM parameter correctly to ensure that the VCO input
|
|
* frequency ranges from 1 to 2 MHz. It is recommended to select a frequency
|
|
* of 1 MHz to limit PLLI2S jitter.
|
|
*
|
|
* @param __PLLI2SN__: specifies the multiplication factor for PLLI2S VCO output clock
|
|
* This parameter must be a number between Min_Data = 50 and Max_Data = 432.
|
|
* @note You have to set the PLLI2SN parameter correctly to ensure that the VCO
|
|
* output frequency is between Min_Data = 100 and Max_Data = 432 MHz.
|
|
*
|
|
* @param __PLLI2SR__: specifies the division factor for I2S clock
|
|
* This parameter must be a number between Min_Data = 2 and Max_Data = 7.
|
|
* @note You have to set the PLLI2SR parameter correctly to not exceed 192 MHz
|
|
* on the I2S clock frequency.
|
|
*
|
|
* @param __PLLI2SQ__: specifies the division factor for SAI clock
|
|
* This parameter must be a number between Min_Data = 2 and Max_Data = 15.
|
|
*/
|
|
#define __HAL_RCC_PLLI2S_CONFIG(__PLLI2SM__, __PLLI2SN__, __PLLI2SQ__, __PLLI2SR__) \
|
|
(RCC->PLLI2SCFGR = ((__PLLI2SM__) |\
|
|
((__PLLI2SN__) << POSITION_VAL(RCC_PLLI2SCFGR_PLLI2SN)) |\
|
|
((__PLLI2SQ__) << POSITION_VAL(RCC_PLLI2SCFGR_PLLI2SQ)) |\
|
|
((__PLLI2SR__) << POSITION_VAL(RCC_PLLI2SCFGR_PLLI2SR))))
|
|
#else
|
|
/** @brief Macro to configure the PLLI2S clock multiplication and division factors .
|
|
* @note This macro must be used only when the PLLI2S is disabled.
|
|
* @note PLLI2S clock source is common with the main PLL (configured in
|
|
* HAL_RCC_ClockConfig() API).
|
|
* @param __PLLI2SN__: specifies the multiplication factor for PLLI2S VCO output clock
|
|
* This parameter must be a number between Min_Data = 50 and Max_Data = 432.
|
|
* @note You have to set the PLLI2SN parameter correctly to ensure that the VCO
|
|
* output frequency is between Min_Data = 100 and Max_Data = 432 MHz.
|
|
*
|
|
* @param __PLLI2SR__: specifies the division factor for I2S clock
|
|
* This parameter must be a number between Min_Data = 2 and Max_Data = 7.
|
|
* @note You have to set the PLLI2SR parameter correctly to not exceed 192 MHz
|
|
* on the I2S clock frequency.
|
|
*
|
|
*/
|
|
#define __HAL_RCC_PLLI2S_CONFIG(__PLLI2SN__, __PLLI2SR__) \
|
|
(RCC->PLLI2SCFGR = (((__PLLI2SN__) << POSITION_VAL(RCC_PLLI2SCFGR_PLLI2SN)) |\
|
|
((__PLLI2SR__) << POSITION_VAL(RCC_PLLI2SCFGR_PLLI2SR))))
|
|
#endif /* STM32F446xx */
|
|
|
|
#if defined(STM32F411xE)
|
|
/** @brief Macro to configure the PLLI2S clock multiplication and division factors .
|
|
* @note This macro must be used only when the PLLI2S is disabled.
|
|
* @note This macro must be used only when the PLLI2S is disabled.
|
|
* @note PLLI2S clock source is common with the main PLL (configured in
|
|
* HAL_RCC_ClockConfig() API).
|
|
* @param __PLLI2SM__: specifies the division factor for PLLI2S VCO input clock
|
|
* This parameter must be a number between Min_Data = 2 and Max_Data = 63.
|
|
* @note The PLLI2SM parameter is only used with STM32F411xE/STM32F410xx Devices
|
|
* @note You have to set the PLLI2SM parameter correctly to ensure that the VCO input
|
|
* frequency ranges from 1 to 2 MHz. It is recommended to select a frequency
|
|
* of 2 MHz to limit PLLI2S jitter.
|
|
* @param __PLLI2SN__: specifies the multiplication factor for PLLI2S VCO output clock
|
|
* This parameter must be a number between Min_Data = 192 and Max_Data = 432.
|
|
* @note You have to set the PLLI2SN parameter correctly to ensure that the VCO
|
|
* output frequency is between Min_Data = 192 and Max_Data = 432 MHz.
|
|
* @param __PLLI2SR__: specifies the division factor for I2S clock
|
|
* This parameter must be a number between Min_Data = 2 and Max_Data = 7.
|
|
* @note You have to set the PLLI2SR parameter correctly to not exceed 192 MHz
|
|
* on the I2S clock frequency.
|
|
*/
|
|
#define __HAL_RCC_PLLI2S_I2SCLK_CONFIG(__PLLI2SM__, __PLLI2SN__, __PLLI2SR__) (RCC->PLLI2SCFGR = ((__PLLI2SM__) |\
|
|
((__PLLI2SN__) << POSITION_VAL(RCC_PLLI2SCFGR_PLLI2SN)) |\
|
|
((__PLLI2SR__) << POSITION_VAL(RCC_PLLI2SCFGR_PLLI2SR))))
|
|
#endif /* STM32F411xE */
|
|
|
|
#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F469xx) || defined(STM32F479xx)
|
|
/** @brief Macro used by the SAI HAL driver to configure the PLLI2S clock multiplication and division factors.
|
|
* @note This macro must be used only when the PLLI2S is disabled.
|
|
* @note PLLI2S clock source is common with the main PLL (configured in
|
|
* HAL_RCC_ClockConfig() API)
|
|
* @param __PLLI2SN__: specifies the multiplication factor for PLLI2S VCO output clock.
|
|
* This parameter must be a number between Min_Data = 50 and Max_Data = 432.
|
|
* @note You have to set the PLLI2SN parameter correctly to ensure that the VCO
|
|
* output frequency is between Min_Data = 100 and Max_Data = 432 MHz.
|
|
* @param __PLLI2SQ__: specifies the division factor for SAI1 clock.
|
|
* This parameter must be a number between Min_Data = 2 and Max_Data = 15.
|
|
* @note the PLLI2SQ parameter is only available with STM32F427xx/437xx/429xx/439xx/469xx/479xx
|
|
* Devices and can be configured using the __HAL_RCC_PLLI2S_PLLSAICLK_CONFIG() macro
|
|
* @param __PLLI2SR__: specifies the division factor for I2S clock
|
|
* This parameter must be a number between Min_Data = 2 and Max_Data = 7.
|
|
* @note You have to set the PLLI2SR parameter correctly to not exceed 192 MHz
|
|
* on the I2S clock frequency.
|
|
*/
|
|
#define __HAL_RCC_PLLI2S_SAICLK_CONFIG(__PLLI2SN__, __PLLI2SQ__, __PLLI2SR__) (RCC->PLLI2SCFGR = ((__PLLI2SN__) << 6) |\
|
|
((__PLLI2SQ__) << 24) |\
|
|
((__PLLI2SR__) << 28))
|
|
#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F469xx || STM32F479xx */
|
|
/*----------------------------------------------------------------------------*/
|
|
|
|
/*------------------------------ PLLSAI Configuration ------------------------*/
|
|
#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx)
|
|
/** @brief Macros to Enable or Disable the PLLISAI.
|
|
* @note The PLLSAI is only available with STM32F429x/439x Devices.
|
|
* @note The PLLSAI is disabled by hardware when entering STOP and STANDBY modes.
|
|
*/
|
|
#define __HAL_RCC_PLLSAI_ENABLE() (*(__IO uint32_t *) RCC_CR_PLLSAION_BB = ENABLE)
|
|
#define __HAL_RCC_PLLSAI_DISABLE() (*(__IO uint32_t *) RCC_CR_PLLSAION_BB = DISABLE)
|
|
|
|
#if defined(STM32F446xx)
|
|
/** @brief Macro to configure the PLLSAI clock multiplication and division factors.
|
|
*
|
|
* @param __PLLSAIM__: specifies the division factor for PLLSAI VCO input clock
|
|
* This parameter must be a number between Min_Data = 2 and Max_Data = 63.
|
|
* @note You have to set the PLLSAIM parameter correctly to ensure that the VCO input
|
|
* frequency ranges from 1 to 2 MHz. It is recommended to select a frequency
|
|
* of 1 MHz to limit PLLI2S jitter.
|
|
* @note The PLLSAIM parameter is only used with STM32F446xx Devices
|
|
*
|
|
* @param __PLLSAIN__: specifies the multiplication factor for PLLSAI VCO output clock.
|
|
* This parameter must be a number between Min_Data = 50 and Max_Data = 432.
|
|
* @note You have to set the PLLSAIN parameter correctly to ensure that the VCO
|
|
* output frequency is between Min_Data = 100 and Max_Data = 432 MHz.
|
|
*
|
|
* @param __PLLSAIP__: specifies division factor for OTG FS, SDIO and RNG clocks.
|
|
* This parameter must be a number in the range {2, 4, 6, or 8}.
|
|
* @note the PLLSAIP parameter is only available with STM32F446xx Devices
|
|
*
|
|
* @param __PLLSAIQ__: specifies the division factor for SAI clock
|
|
* This parameter must be a number between Min_Data = 2 and Max_Data = 15.
|
|
*
|
|
* @param __PLLSAIR__: specifies the division factor for LTDC clock
|
|
* This parameter must be a number between Min_Data = 2 and Max_Data = 7.
|
|
* @note the PLLI2SR parameter is only available with STM32F427/437/429/439xx Devices
|
|
*/
|
|
#define __HAL_RCC_PLLSAI_CONFIG(__PLLSAIM__, __PLLSAIN__, __PLLSAIP__, __PLLSAIQ__, __PLLSAIR__) \
|
|
(RCC->PLLSAICFGR = ((__PLLSAIM__) | \
|
|
((__PLLSAIN__) << POSITION_VAL(RCC_PLLSAICFGR_PLLSAIN)) | \
|
|
((((__PLLSAIP__) >> 1) -1) << POSITION_VAL(RCC_PLLSAICFGR_PLLSAIP)) | \
|
|
((__PLLSAIQ__) << POSITION_VAL(RCC_PLLSAICFGR_PLLSAIQ))))
|
|
#endif /* STM32F446xx */
|
|
|
|
#if defined(STM32F469xx) || defined(STM32F479xx)
|
|
/** @brief Macro to configure the PLLSAI clock multiplication and division factors.
|
|
*
|
|
* @param __PLLSAIN__: specifies the multiplication factor for PLLSAI VCO output clock.
|
|
* This parameter must be a number between Min_Data = 50 and Max_Data = 432.
|
|
* @note You have to set the PLLSAIN parameter correctly to ensure that the VCO
|
|
* output frequency is between Min_Data = 100 and Max_Data = 432 MHz.
|
|
*
|
|
* @param __PLLSAIP__: specifies division factor for SDIO and CLK48 clocks.
|
|
* This parameter must be a number in the range {2, 4, 6, or 8}.
|
|
*
|
|
* @param __PLLSAIQ__: specifies the division factor for SAI clock
|
|
* This parameter must be a number between Min_Data = 2 and Max_Data = 15.
|
|
*
|
|
* @param __PLLSAIR__: specifies the division factor for LTDC clock
|
|
* This parameter must be a number between Min_Data = 2 and Max_Data = 7.
|
|
*/
|
|
#define __HAL_RCC_PLLSAI_CONFIG(__PLLSAIN__, __PLLSAIP__, __PLLSAIQ__, __PLLSAIR__) \
|
|
(RCC->PLLSAICFGR = (((__PLLSAIN__) << POSITION_VAL(RCC_PLLSAICFGR_PLLSAIN)) |\
|
|
((((__PLLSAIP__) >> 1) -1) << POSITION_VAL(RCC_PLLSAICFGR_PLLSAIP)) |\
|
|
((__PLLSAIQ__) << POSITION_VAL(RCC_PLLSAICFGR_PLLSAIQ)) |\
|
|
((__PLLSAIR__) << POSITION_VAL(RCC_PLLSAICFGR_PLLSAIR))))
|
|
#endif /* STM32F469xx || STM32F479xx */
|
|
|
|
#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)
|
|
/** @brief Macro to configure the PLLSAI clock multiplication and division factors.
|
|
*
|
|
* @param __PLLSAIN__: specifies the multiplication factor for PLLSAI VCO output clock.
|
|
* This parameter must be a number between Min_Data = 50 and Max_Data = 432.
|
|
* @note You have to set the PLLSAIN parameter correctly to ensure that the VCO
|
|
* output frequency is between Min_Data = 100 and Max_Data = 432 MHz.
|
|
*
|
|
* @param __PLLSAIQ__: specifies the division factor for SAI clock
|
|
* This parameter must be a number between Min_Data = 2 and Max_Data = 15.
|
|
*
|
|
* @param __PLLSAIR__: specifies the division factor for LTDC clock
|
|
* This parameter must be a number between Min_Data = 2 and Max_Data = 7.
|
|
* @note the PLLI2SR parameter is only available with STM32F427/437/429/439xx Devices
|
|
*/
|
|
#define __HAL_RCC_PLLSAI_CONFIG(__PLLSAIN__, __PLLSAIQ__, __PLLSAIR__) \
|
|
(RCC->PLLSAICFGR = (((__PLLSAIN__) << POSITION_VAL(RCC_PLLSAICFGR_PLLSAIN)) | \
|
|
((__PLLSAIQ__) << POSITION_VAL(RCC_PLLSAICFGR_PLLSAIQ)) | \
|
|
((__PLLSAIR__) << POSITION_VAL(RCC_PLLSAICFGR_PLLSAIR))))
|
|
#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */
|
|
|
|
#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx || STM32F469xx || STM32F479xx */
|
|
/*----------------------------------------------------------------------------*/
|
|
|
|
/*------------------- PLLSAI/PLLI2S Dividers Configuration -------------------*/
|
|
#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F446xx) ||\
|
|
defined(STM32F469xx) || defined(STM32F479xx)
|
|
/** @brief Macro to configure the SAI clock Divider coming from PLLI2S.
|
|
* @note This function must be called before enabling the PLLI2S.
|
|
* @param __PLLI2SDivQ__: specifies the PLLI2S division factor for SAI1 clock.
|
|
* This parameter must be a number between 1 and 32.
|
|
* SAI1 clock frequency = f(PLLI2SQ) / __PLLI2SDivQ__
|
|
*/
|
|
#define __HAL_RCC_PLLI2S_PLLSAICLKDIVQ_CONFIG(__PLLI2SDivQ__) (MODIFY_REG(RCC->DCKCFGR, RCC_DCKCFGR_PLLI2SDIVQ, (__PLLI2SDivQ__)-1))
|
|
|
|
/** @brief Macro to configure the SAI clock Divider coming from PLLSAI.
|
|
* @note This function must be called before enabling the PLLSAI.
|
|
* @param __PLLSAIDivQ__: specifies the PLLSAI division factor for SAI1 clock .
|
|
* This parameter must be a number between Min_Data = 1 and Max_Data = 32.
|
|
* SAI1 clock frequency = f(PLLSAIQ) / __PLLSAIDivQ__
|
|
*/
|
|
#define __HAL_RCC_PLLSAI_PLLSAICLKDIVQ_CONFIG(__PLLSAIDivQ__) (MODIFY_REG(RCC->DCKCFGR, RCC_DCKCFGR_PLLSAIDIVQ, ((__PLLSAIDivQ__)-1)<<8))
|
|
#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx || STM32F469xx || STM32F479xx */
|
|
|
|
#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F469xx) || defined(STM32F479xx)
|
|
/** @brief Macro to configure the LTDC clock Divider coming from PLLSAI.
|
|
*
|
|
* @note The LTDC peripheral is only available with STM32F427/437/429/439/469/479xx Devices.
|
|
* @note This function must be called before enabling the PLLSAI.
|
|
* @param __PLLSAIDivR__: specifies the PLLSAI division factor for LTDC clock .
|
|
* This parameter must be a number between Min_Data = 2 and Max_Data = 16.
|
|
* LTDC clock frequency = f(PLLSAIR) / __PLLSAIDivR__
|
|
*/
|
|
#define __HAL_RCC_PLLSAI_PLLSAICLKDIVR_CONFIG(__PLLSAIDivR__) (MODIFY_REG(RCC->DCKCFGR, RCC_DCKCFGR_PLLSAIDIVR, (__PLLSAIDivR__)))
|
|
#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F469xx || STM32F479xx */
|
|
/*----------------------------------------------------------------------------*/
|
|
|
|
/*------------------------- Peripheral Clock selection -----------------------*/
|
|
#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) ||\
|
|
defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\
|
|
defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE) || defined(STM32F469xx) ||\
|
|
defined(STM32F479xx)
|
|
/** @brief Macro to configure the I2S clock source (I2SCLK).
|
|
* @note This function must be called before enabling the I2S APB clock.
|
|
* @param __SOURCE__: specifies the I2S clock source.
|
|
* This parameter can be one of the following values:
|
|
* @arg RCC_I2SCLKSOURCE_PLLI2S: PLLI2S clock used as I2S clock source.
|
|
* @arg RCC_I2SCLKSOURCE_EXT: External clock mapped on the I2S_CKIN pin
|
|
* used as I2S clock source.
|
|
*/
|
|
#define __HAL_RCC_I2S_CONFIG(__SOURCE__) (*(__IO uint32_t *) RCC_CFGR_I2SSRC_BB = (__SOURCE__))
|
|
#endif /* STM32F40xxx || STM32F41xxx || STM32F42xxx || STM32F43xxx || STM32F469xx || STM32F479xx */
|
|
|
|
#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F469xx) || defined(STM32F479xx)
|
|
|
|
/** @brief Macro to configure SAI1BlockA clock source selection.
|
|
* @note The SAI peripheral is only available with STM32F427/437/429/439/469/479xx Devices.
|
|
* @note This function must be called before enabling PLLSAI, PLLI2S and
|
|
* the SAI clock.
|
|
* @param __SOURCE__: specifies the SAI Block A clock source.
|
|
* This parameter can be one of the following values:
|
|
* @arg RCC_SAIACLKSOURCE_PLLI2S: PLLI2S_Q clock divided by PLLI2SDIVQ used
|
|
* as SAI1 Block A clock.
|
|
* @arg RCC_SAIACLKSOURCE_PLLSAI: PLLISAI_Q clock divided by PLLSAIDIVQ used
|
|
* as SAI1 Block A clock.
|
|
* @arg RCC_SAIACLKSOURCE_Ext: External clock mapped on the I2S_CKIN pin
|
|
* used as SAI1 Block A clock.
|
|
*/
|
|
#define __HAL_RCC_SAI_BLOCKACLKSOURCE_CONFIG(__SOURCE__) (MODIFY_REG(RCC->DCKCFGR, RCC_DCKCFGR_SAI1ASRC, (__SOURCE__)))
|
|
|
|
/** @brief Macro to configure SAI1BlockB clock source selection.
|
|
* @note The SAI peripheral is only available with STM32F427/437/429/439/469/479xx Devices.
|
|
* @note This function must be called before enabling PLLSAI, PLLI2S and
|
|
* the SAI clock.
|
|
* @param __SOURCE__: specifies the SAI Block B clock source.
|
|
* This parameter can be one of the following values:
|
|
* @arg RCC_SAIBCLKSOURCE_PLLI2S: PLLI2S_Q clock divided by PLLI2SDIVQ used
|
|
* as SAI1 Block B clock.
|
|
* @arg RCC_SAIBCLKSOURCE_PLLSAI: PLLISAI_Q clock divided by PLLSAIDIVQ used
|
|
* as SAI1 Block B clock.
|
|
* @arg RCC_SAIBCLKSOURCE_Ext: External clock mapped on the I2S_CKIN pin
|
|
* used as SAI1 Block B clock.
|
|
*/
|
|
#define __HAL_RCC_SAI_BLOCKBCLKSOURCE_CONFIG(__SOURCE__) (MODIFY_REG(RCC->DCKCFGR, RCC_DCKCFGR_SAI1BSRC, (__SOURCE__)))
|
|
#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F469xx || STM32F479xx */
|
|
|
|
#if defined(STM32F446xx)
|
|
/** @brief Macro to configure SAI1 clock source selection.
|
|
* @note This configuration is only available with STM32F446xx Devices.
|
|
* @note This function must be called before enabling PLL, PLLSAI, PLLI2S and
|
|
* the SAI clock.
|
|
* @param __SOURCE__: specifies the SAI1 clock source.
|
|
* This parameter can be one of the following values:
|
|
* @arg RCC_SAI1CLKSOURCE_PLLI2S: PLLI2S_Q clock divided by PLLI2SDIVQ used as SAI1 clock.
|
|
* @arg RCC_SAI1CLKSOURCE_PLLSAI: PLLISAI_Q clock divided by PLLSAIDIVQ used as SAI1 clock.
|
|
* @arg RCC_SAI1CLKSOURCE_PLLR: PLL VCO Output divided by PLLR used as SAI1 clock.
|
|
* @arg RCC_SAI1CLKSOURCE_EXT: External clock mapped on the I2S_CKIN pin used as SAI1 clock.
|
|
*/
|
|
#define __HAL_RCC_SAI1_CONFIG(__SOURCE__) (MODIFY_REG(RCC->DCKCFGR, RCC_DCKCFGR_SAI1SRC, (__SOURCE__)))
|
|
|
|
/** @brief Macro to Get SAI1 clock source selection.
|
|
* @note This configuration is only available with STM32F446xx Devices.
|
|
* @retval The clock source can be one of the following values:
|
|
* @arg RCC_SAI1CLKSOURCE_PLLI2S: PLLI2S_Q clock divided by PLLI2SDIVQ used as SAI1 clock.
|
|
* @arg RCC_SAI1CLKSOURCE_PLLSAI: PLLISAI_Q clock divided by PLLSAIDIVQ used as SAI1 clock.
|
|
* @arg RCC_SAI1CLKSOURCE_PLLR: PLL VCO Output divided by PLLR used as SAI1 clock.
|
|
* @arg RCC_SAI1CLKSOURCE_EXT: External clock mapped on the I2S_CKIN pin used as SAI1 clock.
|
|
*/
|
|
#define __HAL_RCC_GET_SAI1_SOURCE() (READ_BIT(RCC->DCKCFGR, RCC_DCKCFGR_SAI1SRC))
|
|
|
|
/** @brief Macro to configure SAI2 clock source selection.
|
|
* @note This configuration is only available with STM32F446xx Devices.
|
|
* @note This function must be called before enabling PLL, PLLSAI, PLLI2S and
|
|
* the SAI clock.
|
|
* @param __SOURCE__: specifies the SAI2 clock source.
|
|
* This parameter can be one of the following values:
|
|
* @arg RCC_SAI2CLKSOURCE_PLLI2S: PLLI2S_Q clock divided by PLLI2SDIVQ used as SAI2 clock.
|
|
* @arg RCC_SAI2CLKSOURCE_PLLSAI: PLLISAI_Q clock divided by PLLSAIDIVQ used as SAI2 clock.
|
|
* @arg RCC_SAI2CLKSOURCE_PLLR: PLL VCO Output divided by PLLR used as SAI2 clock.
|
|
* @arg RCC_SAI2CLKSOURCE_PLLSRC: HSI or HSE depending from PLL Source clock used as SAI2 clock.
|
|
*/
|
|
#define __HAL_RCC_SAI2_CONFIG(__SOURCE__) (MODIFY_REG(RCC->DCKCFGR, RCC_DCKCFGR_SAI2SRC, (__SOURCE__)))
|
|
|
|
/** @brief Macro to Get SAI2 clock source selection.
|
|
* @note This configuration is only available with STM32F446xx Devices.
|
|
* @retval The clock source can be one of the following values:
|
|
* @arg RCC_SAI2CLKSOURCE_PLLI2S: PLLI2S_Q clock divided by PLLI2SDIVQ used as SAI2 clock.
|
|
* @arg RCC_SAI2CLKSOURCE_PLLSAI: PLLISAI_Q clock divided by PLLSAIDIVQ used as SAI2 clock.
|
|
* @arg RCC_SAI2CLKSOURCE_PLLR: PLL VCO Output divided by PLLR used as SAI2 clock.
|
|
* @arg RCC_SAI2CLKSOURCE_PLLSRC: HSI or HSE depending from PLL Source clock used as SAI2 clock.
|
|
*/
|
|
#define __HAL_RCC_GET_SAI2_SOURCE() (READ_BIT(RCC->DCKCFGR, RCC_DCKCFGR_SAI2SRC))
|
|
|
|
/** @brief Macro to configure I2S APB1 clock source selection.
|
|
* @note This function must be called before enabling PLL, PLLI2S and the I2S clock.
|
|
* @param __SOURCE__: specifies the I2S APB1 clock source.
|
|
* This parameter can be one of the following values:
|
|
* @arg RCC_I2SAPB1CLKSOURCE_PLLI2S: PLLI2S VCO output clock divided by PLLI2SR used as I2S clock.
|
|
* @arg RCC_I2SAPB1CLKSOURCE_EXT: External clock mapped on the I2S_CKIN pin used as SAI1 clock.
|
|
* @arg RCC_I2SAPB1CLKSOURCE_PLLR: PLL VCO Output divided by PLLR used as SAI1 clock.
|
|
* @arg RCC_I2SAPB1CLKSOURCE_PLLSRC: HSI or HSE depending from PLL source Clock.
|
|
*/
|
|
#define __HAL_RCC_I2S_APB1_CONFIG(__SOURCE__) (MODIFY_REG(RCC->DCKCFGR, RCC_DCKCFGR_I2S1SRC, (__SOURCE__)))
|
|
|
|
/** @brief Macro to Get I2S APB1 clock source selection.
|
|
* @retval The clock source can be one of the following values:
|
|
* @arg RCC_I2SAPB1CLKSOURCE_PLLI2S: PLLI2S VCO output clock divided by PLLI2SR used as I2S clock.
|
|
* @arg RCC_I2SAPB1CLKSOURCE_EXT: External clock mapped on the I2S_CKIN pin used as SAI1 clock.
|
|
* @arg RCC_I2SAPB1CLKSOURCE_PLLR: PLL VCO Output divided by PLLR used as SAI1 clock.
|
|
* @arg RCC_I2SAPB1CLKSOURCE_PLLSRC: HSI or HSE depending from PLL source Clock.
|
|
*/
|
|
#define __HAL_RCC_GET_I2S_APB1_SOURCE() (READ_BIT(RCC->DCKCFGR, RCC_DCKCFGR_I2S1SRC))
|
|
|
|
/** @brief Macro to configure I2S APB2 clock source selection.
|
|
* @note This function must be called before enabling PLL, PLLI2S and the I2S clock.
|
|
* @param __SOURCE__: specifies the SAI Block A clock source.
|
|
* This parameter can be one of the following values:
|
|
* @arg RCC_I2SAPB2CLKSOURCE_PLLI2S: PLLI2S VCO output clock divided by PLLI2SR used as I2S clock.
|
|
* @arg RCC_I2SAPB2CLKSOURCE_EXT: External clock mapped on the I2S_CKIN pin used as SAI1 clock.
|
|
* @arg RCC_I2SAPB2CLKSOURCE_PLLR: PLL VCO Output divided by PLLR used as SAI1 clock.
|
|
* @arg RCC_I2SAPB2CLKSOURCE_PLLSRC: HSI or HSE depending from PLL source Clock.
|
|
*/
|
|
#define __HAL_RCC_I2S_APB2_CONFIG(__SOURCE__) (MODIFY_REG(RCC->DCKCFGR, RCC_DCKCFGR_I2S2SRC, (__SOURCE__)))
|
|
|
|
/** @brief Macro to Get I2S APB2 clock source selection.
|
|
* @retval The clock source can be one of the following values:
|
|
* @arg RCC_I2SAPB2CLKSOURCE_PLLI2S: PLLI2S VCO output clock divided by PLLI2SR used as I2S clock.
|
|
* @arg RCC_I2SAPB2CLKSOURCE_EXT: External clock mapped on the I2S_CKIN pin used as SAI1 clock.
|
|
* @arg RCC_I2SAPB2CLKSOURCE_PLLR: PLL VCO Output divided by PLLR used as SAI1 clock.
|
|
* @arg RCC_I2SAPB2CLKSOURCE_PLLSRC: HSI or HSE depending from PLL source Clock.
|
|
*/
|
|
#define __HAL_RCC_GET_I2S_APB2_SOURCE() (READ_BIT(RCC->DCKCFGR, RCC_DCKCFGR_I2S2SRC))
|
|
|
|
/** @brief Macro to configure the CEC clock.
|
|
* @param __SOURCE__: specifies the CEC clock source.
|
|
* This parameter can be one of the following values:
|
|
* @arg RCC_CECCLKSOURCE_HSI: HSI selected as CEC clock
|
|
* @arg RCC_CECCLKSOURCE_LSE: LSE selected as CEC clock
|
|
*/
|
|
#define __HAL_RCC_CEC_CONFIG(__SOURCE__) (MODIFY_REG(RCC->DCKCFGR2, RCC_DCKCFGR2_CECSEL, (uint32_t)(__SOURCE__)))
|
|
|
|
/** @brief Macro to Get the CEC clock.
|
|
* @retval The clock source can be one of the following values:
|
|
* @arg RCC_CECCLKSOURCE_HSI488: HSI selected as CEC clock
|
|
* @arg RCC_CECCLKSOURCE_LSE: LSE selected as CEC clock
|
|
*/
|
|
#define __HAL_RCC_GET_CEC_SOURCE() (READ_BIT(RCC->DCKCFGR2, RCC_DCKCFGR2_CECSEL))
|
|
|
|
/** @brief Macro to configure the FMPI2C1 clock.
|
|
* @param __SOURCE__: specifies the FMPI2C1 clock source.
|
|
* This parameter can be one of the following values:
|
|
* @arg RCC_FMPI2C1CLKSOURCE_APB: APB selected as FMPI2C1 clock
|
|
* @arg RCC_FMPI2C1CLKSOURCE_SYSCLK: SYS clock selected as FMPI2C1 clock
|
|
* @arg RCC_FMPI2C1CLKSOURCE_HSI: HSI selected as FMPI2C1 clock
|
|
*/
|
|
#define __HAL_RCC_FMPI2C1_CONFIG(__SOURCE__) (MODIFY_REG(RCC->DCKCFGR2, RCC_DCKCFGR2_FMPI2C1SEL, (uint32_t)(__SOURCE__)))
|
|
|
|
/** @brief Macro to Get the FMPI2C1 clock.
|
|
* @retval The clock source can be one of the following values:
|
|
* @arg RCC_FMPI2C1CLKSOURCE_APB: APB selected as FMPI2C1 clock
|
|
* @arg RCC_FMPI2C1CLKSOURCE_SYSCLK: SYS clock selected as FMPI2C1 clock
|
|
* @arg RCC_FMPI2C1CLKSOURCE_HSI: HSI selected as FMPI2C1 clock
|
|
*/
|
|
#define __HAL_RCC_GET_FMPI2C1_SOURCE() (READ_BIT(RCC->DCKCFGR2, RCC_DCKCFGR2_FMPI2C1SEL))
|
|
|
|
/** @brief Macro to configure the CLK48 clock.
|
|
* @param __SOURCE__: specifies the CLK48 clock source.
|
|
* This parameter can be one of the following values:
|
|
* @arg RCC_CLK48CLKSOURCE_PLLQ: PLL VCO Output divided by PLLQ used as CLK48 clock.
|
|
* @arg RCC_CLK48CLKSOURCE_PLLSAIP: PLLSAI VCO Output divided by PLLSAIP used as CLK48 clock.
|
|
*/
|
|
#define __HAL_RCC_CLK48_CONFIG(__SOURCE__) (MODIFY_REG(RCC->DCKCFGR2, RCC_DCKCFGR2_CK48MSEL, (uint32_t)(__SOURCE__)))
|
|
|
|
/** @brief Macro to Get the CLK48 clock.
|
|
* @retval The clock source can be one of the following values:
|
|
* @arg RCC_CLK48CLKSOURCE_PLLQ: PLL VCO Output divided by PLLQ used as CLK48 clock.
|
|
* @arg RCC_CLK48CLKSOURCE_PLLSAIP: PLLSAI VCO Output divided by PLLSAIP used as CLK48 clock.
|
|
*/
|
|
#define __HAL_RCC_GET_CLK48_SOURCE() (READ_BIT(RCC->DCKCFGR2, RCC_DCKCFGR2_CK48MSEL))
|
|
|
|
/** @brief Macro to configure the SDIO clock.
|
|
* @param __SOURCE__: specifies the SDIO clock source.
|
|
* This parameter can be one of the following values:
|
|
* @arg RCC_SDIOCLKSOURCE_CLK48: CLK48 output used as SDIO clock.
|
|
* @arg RCC_SDIOCLKSOURCE_SYSCLK: System clock output used as SDIO clock.
|
|
*/
|
|
#define __HAL_RCC_SDIO_CONFIG(__SOURCE__) (MODIFY_REG(RCC->DCKCFGR2, RCC_DCKCFGR2_SDIOSEL, (uint32_t)(__SOURCE__)))
|
|
|
|
/** @brief Macro to Get the SDIO clock.
|
|
* @retval The clock source can be one of the following values:
|
|
* @arg RCC_SDIOCLKSOURCE_CLK48: CLK48 output used as SDIO clock.
|
|
* @arg RCC_SDIOCLKSOURCE_SYSCLK: System clock output used as SDIO clock.
|
|
*/
|
|
#define __HAL_RCC_GET_SDIO_SOURCE() (READ_BIT(RCC->DCKCFGR2, RCC_DCKCFGR2_SDIOSEL))
|
|
|
|
/** @brief Macro to configure the SPDIFRX clock.
|
|
* @param __SOURCE__: specifies the SPDIFRX clock source.
|
|
* This parameter can be one of the following values:
|
|
* @arg RCC_SPDIFRXCLKSOURCE_PLLR: PLL VCO Output divided by PLLR used as SPDIFRX clock.
|
|
* @arg RCC_SPDIFRXCLKSOURCE_PLLI2SP: PLLI2S VCO Output divided by PLLI2SP used as SPDIFRX clock.
|
|
*/
|
|
#define __HAL_RCC_SPDIFRX_CONFIG(__SOURCE__) (MODIFY_REG(RCC->DCKCFGR2, RCC_DCKCFGR2_SPDIFRXSEL, (uint32_t)(__SOURCE__)))
|
|
|
|
/** @brief Macro to Get the SPDIFRX clock.
|
|
* @retval The clock source can be one of the following values:
|
|
* @arg RCC_SPDIFRXCLKSOURCE_PLLR: PLL VCO Output divided by PLLR used as SPDIFRX clock.
|
|
* @arg RCC_SPDIFRXCLKSOURCE_PLLI2SP: PLLI2S VCO Output divided by PLLI2SP used as SPDIFRX clock.
|
|
*/
|
|
#define __HAL_RCC_GET_SPDIFRX_SOURCE() (READ_BIT(RCC->DCKCFGR2, RCC_DCKCFGR2_SPDIFRXSEL))
|
|
#endif /* STM32F446xx */
|
|
|
|
#if defined(STM32F469xx) || defined(STM32F479xx)
|
|
|
|
/** @brief Macro to configure the CLK48 clock.
|
|
* @param __SOURCE__: specifies the CLK48 clock source.
|
|
* This parameter can be one of the following values:
|
|
* @arg RCC_CLK48CLKSOURCE_PLLQ: PLL VCO Output divided by PLLQ used as CLK48 clock.
|
|
* @arg RCC_CLK48CLKSOURCE_PLLSAIP: PLLSAI VCO Output divided by PLLSAIP used as CLK48 clock.
|
|
*/
|
|
#define __HAL_RCC_CLK48_CONFIG(__SOURCE__) (MODIFY_REG(RCC->DCKCFGR, RCC_DCKCFGR_CK48MSEL, (uint32_t)(__SOURCE__)))
|
|
|
|
/** @brief Macro to Get the CLK48 clock.
|
|
* @retval The clock source can be one of the following values:
|
|
* @arg RCC_CLK48CLKSOURCE_PLLQ: PLL VCO Output divided by PLLQ used as CLK48 clock.
|
|
* @arg RCC_CLK48CLKSOURCE_PLLSAIP: PLLSAI VCO Output divided by PLLSAIP used as CLK48 clock.
|
|
*/
|
|
#define __HAL_RCC_GET_CLK48_SOURCE() (READ_BIT(RCC->DCKCFGR, RCC_DCKCFGR_CK48MSEL))
|
|
|
|
/** @brief Macro to configure the SDIO clock.
|
|
* @param __SOURCE__: specifies the SDIO clock source.
|
|
* This parameter can be one of the following values:
|
|
* @arg RCC_SDIOCLKSOURCE_CLK48: CLK48 output used as SDIO clock.
|
|
* @arg RCC_SDIOCLKSOURCE_SYSCLK: System clock output used as SDIO clock.
|
|
*/
|
|
#define __HAL_RCC_SDIO_CONFIG(__SOURCE__) (MODIFY_REG(RCC->DCKCFGR, RCC_DCKCFGR_SDIOSEL, (uint32_t)(__SOURCE__)))
|
|
|
|
/** @brief Macro to Get the SDIO clock.
|
|
* @retval The clock source can be one of the following values:
|
|
* @arg RCC_SDIOCLKSOURCE_CLK48: CLK48 output used as SDIO clock.
|
|
* @arg RCC_SDIOCLKSOURCE_SYSCLK: System clock output used as SDIO clock.
|
|
*/
|
|
#define __HAL_RCC_GET_SDIO_SOURCE() (READ_BIT(RCC->DCKCFGR, RCC_DCKCFGR_SDIOSEL))
|
|
|
|
/** @brief Macro to configure the DSI clock.
|
|
* @param __SOURCE__: specifies the DSI clock source.
|
|
* This parameter can be one of the following values:
|
|
* @arg RCC_DSICLKSOURCE_PLLR: PLLR output used as DSI clock.
|
|
* @arg RCC_DSICLKSOURCE_DSIPHY: DSI-PHY output used as DSI clock.
|
|
*/
|
|
#define __HAL_RCC_DSI_CONFIG(__SOURCE__) (MODIFY_REG(RCC->DCKCFGR, RCC_DCKCFGR_DSISEL, (uint32_t)(__SOURCE__)))
|
|
|
|
/** @brief Macro to Get the DSI clock.
|
|
* @retval The clock source can be one of the following values:
|
|
* @arg RCC_DSICLKSOURCE_PLLR: PLLR output used as DSI clock.
|
|
* @arg RCC_DSICLKSOURCE_DSIPHY: DSI-PHY output used as DSI clock.
|
|
*/
|
|
#define __HAL_RCC_GET_DSI_SOURCE() (READ_BIT(RCC->DCKCFGR, RCC_DCKCFGR_DSISEL))
|
|
|
|
#endif /* STM32F469xx || STM32F479xx */
|
|
|
|
#if defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx)
|
|
/** @brief Macro to configure the DFSDM1 clock.
|
|
* @param __DFSDM1_CLKSOURCE__: specifies the DFSDM1 clock source.
|
|
* This parameter can be one of the following values:
|
|
* @arg RCC_DFSDM1CLKSOURCE_APB2: APB2 clock used as kernel clock.
|
|
* @arg RCC_DFSDM1CLKSOURCE_SYSCLK: System clock used as kernal clock.
|
|
* @retval None
|
|
*/
|
|
#define __HAL_RCC_DFSDM1_CONFIG(__DFSDM1_CLKSOURCE__) MODIFY_REG(RCC->DCKCFGR, RCC_DCKCFGR_CKDFSDM1SEL, (__DFSDM1_CLKSOURCE__))
|
|
|
|
/** @brief Macro to get the DFSDM1 clock source.
|
|
* @retval The clock source can be one of the following values:
|
|
* @arg RCC_DFSDM1CLKSOURCE_APB2: APB2 clock used as kernel clock.
|
|
* @arg RCC_DFSDM1CLKSOURCE_SYSCLK: System clock used as kernal clock.
|
|
*/
|
|
#define __HAL_RCC_GET_DFSDM1_SOURCE() ((uint32_t)(READ_BIT(RCC->DCKCFGR, RCC_DCKCFGR_CKDFSDM1SEL)))
|
|
|
|
/** @brief Macro to configure DFSDM1 Audio clock source selection.
|
|
* @note This configuration is only available with STM32F412Zx/STM32F412Vx/STM32F412Rx/STM32F412Cx Devices.
|
|
* @param __SOURCE__: specifies the DFSDM1 Audio clock source.
|
|
* This parameter can be one of the following values:
|
|
* @arg RCC_DFSDM1AUDIOCLKSOURCE_I2SAPB1: CK_I2S_APB1 selected as audio clock
|
|
* @arg RCC_DFSDM1AUDIOCLKSOURCE_I2SAPB2: CK_I2S_APB2 selected as audio clock
|
|
*/
|
|
#define __HAL_RCC_DFSDM1AUDIO_CONFIG(__SOURCE__) (MODIFY_REG(RCC->DCKCFGR, RCC_DCKCFGR_CKDFSDM1ASEL, (__SOURCE__)))
|
|
|
|
/** @brief Macro to Get DFSDM1 Audio clock source selection.
|
|
* @note This configuration is only available with STM32F412Zx/STM32F412Vx/STM32F412Rx/STM32F412Cx Devices.
|
|
* @retval The clock source can be one of the following values:
|
|
* @arg RCC_DFSDM1AUDIOCLKSOURCE_I2SAPB1: CK_I2S_APB1 selected as audio clock
|
|
* @arg RCC_DFSDM1AUDIOCLKSOURCE_I2SAPB2: CK_I2S_APB2 selected as audio clock
|
|
*/
|
|
#define __HAL_RCC_GET_DFSDM1AUDIO_SOURCE() (READ_BIT(RCC->DCKCFGR, RCC_DCKCFGR_CKDFSDM1ASEL))
|
|
|
|
/** @brief Macro to configure I2S APB1 clock source selection.
|
|
* @param __SOURCE__: specifies the I2S APB1 clock source.
|
|
* This parameter can be one of the following values:
|
|
* @arg RCC_I2SAPB1CLKSOURCE_PLLI2S: PLLI2S VCO output clock divided by PLLI2SR.
|
|
* @arg RCC_I2SAPB1CLKSOURCE_EXT: External clock mapped on the I2S_CKIN pin.
|
|
* @arg RCC_I2SAPB1CLKSOURCE_PLLR: PLL VCO Output divided by PLLR.
|
|
* @arg RCC_I2SAPB1CLKSOURCE_PLLSRC: HSI or HSE depending from PLL source Clock.
|
|
*/
|
|
#define __HAL_RCC_I2S_APB1_CONFIG(__SOURCE__) (MODIFY_REG(RCC->DCKCFGR, RCC_DCKCFGR_I2S1SRC, (__SOURCE__)))
|
|
|
|
/** @brief Macro to Get I2S APB1 clock source selection.
|
|
* @retval The clock source can be one of the following values:
|
|
* @arg RCC_I2SAPB1CLKSOURCE_PLLI2S: PLLI2S VCO output clock divided by PLLI2SR.
|
|
* @arg RCC_I2SAPB1CLKSOURCE_EXT: External clock mapped on the I2S_CKIN pin.
|
|
* @arg RCC_I2SAPB1CLKSOURCE_PLLR: PLL VCO Output divided by PLLR.
|
|
* @arg RCC_I2SAPB1CLKSOURCE_PLLSRC: HSI or HSE depending from PLL source Clock.
|
|
*/
|
|
#define __HAL_RCC_GET_I2S_APB1_SOURCE() (READ_BIT(RCC->DCKCFGR, RCC_DCKCFGR_I2S1SRC))
|
|
|
|
/** @brief Macro to configure I2S APB2 clock source selection.
|
|
* @param __SOURCE__: specifies the I2S APB2 clock source.
|
|
* This parameter can be one of the following values:
|
|
* @arg RCC_I2SAPB2CLKSOURCE_PLLI2S: PLLI2S VCO output clock divided by PLLI2SR.
|
|
* @arg RCC_I2SAPB2CLKSOURCE_EXT: External clock mapped on the I2S_CKIN pin.
|
|
* @arg RCC_I2SAPB2CLKSOURCE_PLLR: PLL VCO Output divided by PLLR.
|
|
* @arg RCC_I2SAPB2CLKSOURCE_PLLSRC: HSI or HSE depending from PLL source Clock.
|
|
*/
|
|
#define __HAL_RCC_I2S_APB2_CONFIG(__SOURCE__) (MODIFY_REG(RCC->DCKCFGR, RCC_DCKCFGR_I2S2SRC, (__SOURCE__)))
|
|
|
|
/** @brief Macro to Get I2S APB2 clock source selection.
|
|
* @retval The clock source can be one of the following values:
|
|
* @arg RCC_I2SAPB2CLKSOURCE_PLLI2S: PLLI2S VCO output clock divided by PLLI2SR.
|
|
* @arg RCC_I2SAPB2CLKSOURCE_EXT: External clock mapped on the I2S_CKIN pin.
|
|
* @arg RCC_I2SAPB2CLKSOURCE_PLLR: PLL VCO Output divided by PLLR.
|
|
* @arg RCC_I2SAPB2CLKSOURCE_PLLSRC: HSI or HSE depending from PLL source Clock.
|
|
*/
|
|
#define __HAL_RCC_GET_I2S_APB2_SOURCE() (READ_BIT(RCC->DCKCFGR, RCC_DCKCFGR_I2S2SRC))
|
|
|
|
/** @brief Macro to configure the PLL I2S clock source (PLLI2SCLK).
|
|
* @note This macro must be called before enabling the I2S APB clock.
|
|
* @param __SOURCE__: specifies the I2S clock source.
|
|
* This parameter can be one of the following values:
|
|
* @arg RCC_PLLI2SCLKSOURCE_PLLSRC: HSI or HSE depending from PLL source Clock.
|
|
* @arg RCC_PLLI2SCLKSOURCE_EXT: External clock mapped on the I2S_CKIN pin
|
|
* used as I2S clock source.
|
|
*/
|
|
#define __HAL_RCC_PLL_I2S_CONFIG(__SOURCE__) (*(__IO uint32_t *) RCC_PLLI2SCFGR_PLLI2SSRC_BB = (__SOURCE__))
|
|
|
|
/** @brief Macro to configure the FMPI2C1 clock.
|
|
* @param __SOURCE__: specifies the FMPI2C1 clock source.
|
|
* This parameter can be one of the following values:
|
|
* @arg RCC_FMPI2C1CLKSOURCE_APB: APB selected as FMPI2C1 clock
|
|
* @arg RCC_FMPI2C1CLKSOURCE_SYSCLK: SYS clock selected as FMPI2C1 clock
|
|
* @arg RCC_FMPI2C1CLKSOURCE_HSI: HSI selected as FMPI2C1 clock
|
|
*/
|
|
#define __HAL_RCC_FMPI2C1_CONFIG(__SOURCE__) (MODIFY_REG(RCC->DCKCFGR2, RCC_DCKCFGR2_FMPI2C1SEL, (uint32_t)(__SOURCE__)))
|
|
|
|
/** @brief Macro to Get the FMPI2C1 clock.
|
|
* @retval The clock source can be one of the following values:
|
|
* @arg RCC_FMPI2C1CLKSOURCE_APB: APB selected as FMPI2C1 clock
|
|
* @arg RCC_FMPI2C1CLKSOURCE_SYSCLK: SYS clock selected as FMPI2C1 clock
|
|
* @arg RCC_FMPI2C1CLKSOURCE_HSI: HSI selected as FMPI2C1 clock
|
|
*/
|
|
#define __HAL_RCC_GET_FMPI2C1_SOURCE() (READ_BIT(RCC->DCKCFGR2, RCC_DCKCFGR2_FMPI2C1SEL))
|
|
|
|
/** @brief Macro to configure the CLK48 clock.
|
|
* @param __SOURCE__: specifies the CLK48 clock source.
|
|
* This parameter can be one of the following values:
|
|
* @arg RCC_CLK48CLKSOURCE_PLLQ: PLL VCO Output divided by PLLQ used as CLK48 clock.
|
|
* @arg RCC_CLK48CLKSOURCE_PLLI2SQ: PLLI2S VCO Output divided by PLLI2SQ used as CLK48 clock.
|
|
*/
|
|
#define __HAL_RCC_CLK48_CONFIG(__SOURCE__) (MODIFY_REG(RCC->DCKCFGR2, RCC_DCKCFGR2_CK48MSEL, (uint32_t)(__SOURCE__)))
|
|
|
|
/** @brief Macro to Get the CLK48 clock.
|
|
* @retval The clock source can be one of the following values:
|
|
* @arg RCC_CLK48CLKSOURCE_PLLQ: PLL VCO Output divided by PLLQ used as CLK48 clock.
|
|
* @arg RCC_CLK48CLKSOURCE_PLLI2SQ: PLLI2S VCO Output divided by PLLI2SQ used as CLK48 clock
|
|
*/
|
|
#define __HAL_RCC_GET_CLK48_SOURCE() (READ_BIT(RCC->DCKCFGR2, RCC_DCKCFGR2_CK48MSEL))
|
|
|
|
/** @brief Macro to configure the SDIO clock.
|
|
* @param __SOURCE__: specifies the SDIO clock source.
|
|
* This parameter can be one of the following values:
|
|
* @arg RCC_SDIOCLKSOURCE_CLK48: CLK48 output used as SDIO clock.
|
|
* @arg RCC_SDIOCLKSOURCE_SYSCLK: System clock output used as SDIO clock.
|
|
*/
|
|
#define __HAL_RCC_SDIO_CONFIG(__SOURCE__) (MODIFY_REG(RCC->DCKCFGR2, RCC_DCKCFGR2_SDIOSEL, (uint32_t)(__SOURCE__)))
|
|
|
|
/** @brief Macro to Get the SDIO clock.
|
|
* @retval The clock source can be one of the following values:
|
|
* @arg RCC_SDIOCLKSOURCE_CLK48: CLK48 output used as SDIO clock.
|
|
* @arg RCC_SDIOCLKSOURCE_SYSCLK: System clock output used as SDIO clock.
|
|
*/
|
|
#define __HAL_RCC_GET_SDIO_SOURCE() (READ_BIT(RCC->DCKCFGR2, RCC_DCKCFGR2_SDIOSEL))
|
|
|
|
#endif /* STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx */
|
|
|
|
#if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx)
|
|
/** @brief Macro to configure I2S clock source selection.
|
|
* @param __SOURCE__: specifies the I2S clock source.
|
|
* This parameter can be one of the following values:
|
|
* @arg RCC_I2SAPBCLKSOURCE_PLLR: PLL VCO output clock divided by PLLR.
|
|
* @arg RCC_I2SAPBCLKSOURCE_EXT: External clock mapped on the I2S_CKIN pin.
|
|
* @arg RCC_I2SAPBCLKSOURCE_PLLSRC: HSI/HSE depends on PLLSRC.
|
|
*/
|
|
#define __HAL_RCC_I2S_CONFIG(__SOURCE__) (MODIFY_REG(RCC->DCKCFGR, RCC_DCKCFGR_I2SSRC, (__SOURCE__)))
|
|
|
|
/** @brief Macro to Get I2S clock source selection.
|
|
* @retval The clock source can be one of the following values:
|
|
* @arg RCC_I2SAPBCLKSOURCE_PLLR: PLL VCO output clock divided by PLLR.
|
|
* @arg RCC_I2SAPBCLKSOURCE_EXT: External clock mapped on the I2S_CKIN pin.
|
|
* @arg RCC_I2SAPBCLKSOURCE_PLLSRC: HSI/HSE depends on PLLSRC.
|
|
*/
|
|
#define __HAL_RCC_GET_I2S_SOURCE() (READ_BIT(RCC->DCKCFGR, RCC_DCKCFGR_I2SSRC))
|
|
|
|
/** @brief Macro to configure the FMPI2C1 clock.
|
|
* @param __SOURCE__: specifies the FMPI2C1 clock source.
|
|
* This parameter can be one of the following values:
|
|
* @arg RCC_FMPI2C1CLKSOURCE_APB: APB selected as FMPI2C1 clock
|
|
* @arg RCC_FMPI2C1CLKSOURCE_SYSCLK: SYS clock selected as FMPI2C1 clock
|
|
* @arg RCC_FMPI2C1CLKSOURCE_HSI: HSI selected as FMPI2C1 clock
|
|
*/
|
|
#define __HAL_RCC_FMPI2C1_CONFIG(__SOURCE__) (MODIFY_REG(RCC->DCKCFGR2, RCC_DCKCFGR2_FMPI2C1SEL, (uint32_t)(__SOURCE__)))
|
|
|
|
/** @brief Macro to Get the FMPI2C1 clock.
|
|
* @retval The clock source can be one of the following values:
|
|
* @arg RCC_FMPI2C1CLKSOURCE_APB: APB selected as FMPI2C1 clock
|
|
* @arg RCC_FMPI2C1CLKSOURCE_SYSCLK: SYS clock selected as FMPI2C1 clock
|
|
* @arg RCC_FMPI2C1CLKSOURCE_HSI: HSI selected as FMPI2C1 clock
|
|
*/
|
|
#define __HAL_RCC_GET_FMPI2C1_SOURCE() (READ_BIT(RCC->DCKCFGR2, RCC_DCKCFGR2_FMPI2C1SEL))
|
|
|
|
/** @brief Macro to configure the LPTIM1 clock.
|
|
* @param __SOURCE__: specifies the LPTIM1 clock source.
|
|
* This parameter can be one of the following values:
|
|
* @arg RCC_LPTIM1CLKSOURCE_PCLK: APB selected as LPTIM1 clock
|
|
* @arg RCC_LPTIM1CLKSOURCE_HSI: HSI clock selected as LPTIM1 clock
|
|
* @arg RCC_LPTIM1CLKSOURCE_LSI: LSI selected as LPTIM1 clock
|
|
* @arg RCC_LPTIM1CLKSOURCE_LSE: LSE selected as LPTIM1 clock
|
|
*/
|
|
#define __HAL_RCC_LPTIM1_CONFIG(__SOURCE__) (MODIFY_REG(RCC->DCKCFGR2, RCC_DCKCFGR2_LPTIM1SEL, (uint32_t)(__SOURCE__)))
|
|
|
|
/** @brief Macro to Get the LPTIM1 clock.
|
|
* @retval The clock source can be one of the following values:
|
|
* @arg RCC_LPTIM1CLKSOURCE_PCLK: APB selected as LPTIM1 clock
|
|
* @arg RCC_LPTIM1CLKSOURCE_HSI: HSI clock selected as LPTIM1 clock
|
|
* @arg RCC_LPTIM1CLKSOURCE_LSI: LSI selected as LPTIM1 clock
|
|
* @arg RCC_LPTIM1CLKSOURCE_LSE: LSE selected as LPTIM1 clock
|
|
*/
|
|
#define __HAL_RCC_GET_LPTIM1_SOURCE() (READ_BIT(RCC->DCKCFGR2, RCC_DCKCFGR2_LPTIM1SEL))
|
|
#endif /* STM32F410Tx || STM32F410Cx || STM32F410Rx */
|
|
|
|
#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\
|
|
defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F410Tx) || defined(STM32F410Cx) ||\
|
|
defined(STM32F410Rx) || defined(STM32F411xE) || defined(STM32F446xx) || defined(STM32F469xx) ||\
|
|
defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) ||\
|
|
defined(STM32F412Cx)
|
|
/** @brief Macro to configure the Timers clocks prescalers
|
|
* @note This feature is only available with STM32F429x/439x Devices.
|
|
* @param __PRESC__ : specifies the Timers clocks prescalers selection
|
|
* This parameter can be one of the following values:
|
|
* @arg RCC_TIMPRES_DESACTIVATED: The Timers kernels clocks prescaler is
|
|
* equal to HPRE if PPREx is corresponding to division by 1 or 2,
|
|
* else it is equal to [(HPRE * PPREx) / 2] if PPREx is corresponding to
|
|
* division by 4 or more.
|
|
* @arg RCC_TIMPRES_ACTIVATED: The Timers kernels clocks prescaler is
|
|
* equal to HPRE if PPREx is corresponding to division by 1, 2 or 4,
|
|
* else it is equal to [(HPRE * PPREx) / 4] if PPREx is corresponding
|
|
* to division by 8 or more.
|
|
*/
|
|
#define __HAL_RCC_TIMCLKPRESCALER(__PRESC__) (*(__IO uint32_t *) RCC_DCKCFGR_TIMPRE_BB = (__PRESC__))
|
|
|
|
#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx) || STM32F401xC || STM32F401xE || STM32F410xx || STM32F411xE ||\
|
|
STM32F446xx || STM32F469xx || STM32F479xx || STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx */
|
|
|
|
/*----------------------------------------------------------------------------*/
|
|
|
|
#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx)
|
|
/** @brief Enable PLLSAI_RDY interrupt.
|
|
*/
|
|
#define __HAL_RCC_PLLSAI_ENABLE_IT() (RCC->CIR |= (RCC_CIR_PLLSAIRDYIE))
|
|
|
|
/** @brief Disable PLLSAI_RDY interrupt.
|
|
*/
|
|
#define __HAL_RCC_PLLSAI_DISABLE_IT() (RCC->CIR &= ~(RCC_CIR_PLLSAIRDYIE))
|
|
|
|
/** @brief Clear the PLLSAI RDY interrupt pending bits.
|
|
*/
|
|
#define __HAL_RCC_PLLSAI_CLEAR_IT() (RCC->CIR |= (RCC_CIR_PLLSAIRDYF))
|
|
|
|
/** @brief Check the PLLSAI RDY interrupt has occurred or not.
|
|
* @retval The new state (TRUE or FALSE).
|
|
*/
|
|
#define __HAL_RCC_PLLSAI_GET_IT() ((RCC->CIR & (RCC_CIR_PLLSAIRDYIE)) == (RCC_CIR_PLLSAIRDYIE))
|
|
|
|
/** @brief Check PLLSAI RDY flag is set or not.
|
|
* @retval The new state (TRUE or FALSE).
|
|
*/
|
|
#define __HAL_RCC_PLLSAI_GET_FLAG() ((RCC->CR & (RCC_CR_PLLSAIRDY)) == (RCC_CR_PLLSAIRDY))
|
|
|
|
#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx || STM32F469xx || STM32F479xx */
|
|
|
|
#if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx)
|
|
/** @brief Macros to enable or disable the RCC MCO1 feature.
|
|
*/
|
|
#define __HAL_RCC_MCO1_ENABLE() (*(__IO uint32_t *) RCC_CFGR_MCO1EN_BB = ENABLE)
|
|
#define __HAL_RCC_MCO1_DISABLE() (*(__IO uint32_t *) RCC_CFGR_MCO1EN_BB = DISABLE)
|
|
|
|
/** @brief Macros to enable or disable the RCC MCO2 feature.
|
|
*/
|
|
#define __HAL_RCC_MCO2_ENABLE() (*(__IO uint32_t *) RCC_CFGR_MCO2EN_BB = ENABLE)
|
|
#define __HAL_RCC_MCO2_DISABLE() (*(__IO uint32_t *) RCC_CFGR_MCO2EN_BB = DISABLE)
|
|
|
|
#endif /* STM32F410Tx || STM32F410Cx || STM32F410Rx */
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/* Exported functions --------------------------------------------------------*/
|
|
/** @addtogroup RCCEx_Exported_Functions
|
|
* @{
|
|
*/
|
|
|
|
/** @addtogroup RCCEx_Exported_Functions_Group1
|
|
* @{
|
|
*/
|
|
HAL_StatusTypeDef HAL_RCCEx_PeriphCLKConfig(RCC_PeriphCLKInitTypeDef *PeriphClkInit);
|
|
void HAL_RCCEx_GetPeriphCLKConfig(RCC_PeriphCLKInitTypeDef *PeriphClkInit);
|
|
|
|
#if defined(STM32F446xx)
|
|
uint32_t HAL_RCCEx_GetPeriphCLKFreq(uint32_t PeriphClk);
|
|
#endif /* STM32F446xx */
|
|
|
|
#if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) || defined(STM32F411xE) ||\
|
|
defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx) || defined(STM32F412Zx) ||\
|
|
defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx)
|
|
void HAL_RCCEx_SelectLSEMode(uint8_t Mode);
|
|
#endif /* STM32F410xx || STM32F411xE || STM32F446xx || STM32F469xx || STM32F479xx || STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx */
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
/* Private types -------------------------------------------------------------*/
|
|
/* Private variables ---------------------------------------------------------*/
|
|
/* Private constants ---------------------------------------------------------*/
|
|
/** @defgroup RCCEx_Private_Constants RCCEx Private Constants
|
|
* @{
|
|
*/
|
|
|
|
/** @defgroup RCCEx_BitAddress_AliasRegion RCC BitAddress AliasRegion
|
|
* @brief RCC registers bit address in the alias region
|
|
* @{
|
|
*/
|
|
/* --- CR Register ---*/
|
|
#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\
|
|
defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx)
|
|
/* Alias word address of PLLSAION bit */
|
|
#define RCC_PLLSAION_BIT_NUMBER 0x1C
|
|
#define RCC_CR_PLLSAION_BB (PERIPH_BB_BASE + (RCC_CR_OFFSET * 32) + (RCC_PLLSAION_BIT_NUMBER * 4))
|
|
|
|
#define PLLSAI_TIMEOUT_VALUE ((uint32_t)2) /* Timeout value fixed to 2 ms */
|
|
#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx || STM32F469xx || STM32F479xx */
|
|
|
|
#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) || \
|
|
defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || \
|
|
defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE) || defined(STM32F446xx) || \
|
|
defined(STM32F469xx) || defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || \
|
|
defined(STM32F412Rx) || defined(STM32F412Cx)
|
|
/* Alias word address of PLLI2SON bit */
|
|
#define RCC_PLLI2SON_BIT_NUMBER 0x1A
|
|
#define RCC_CR_PLLI2SON_BB (PERIPH_BB_BASE + (RCC_CR_OFFSET * 32) + (RCC_PLLI2SON_BIT_NUMBER * 4))
|
|
#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx ||
|
|
STM32F401xC || STM32F401xE || STM32F411xE || STM32F446xx || STM32F469xx || STM32F479xx || STM32F412Zx || STM32F412Vx ||
|
|
STM32F412Rx || STM32F412Cx */
|
|
|
|
/* --- DCKCFGR Register ---*/
|
|
#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\
|
|
defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) || defined(STM32F401xC) ||\
|
|
defined(STM32F401xE) || defined(STM32F411xE) || defined(STM32F446xx) || defined(STM32F469xx) ||\
|
|
defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) ||\
|
|
defined(STM32F412Cx)
|
|
/* Alias word address of TIMPRE bit */
|
|
#define RCC_DCKCFGR_OFFSET (RCC_OFFSET + 0x8C)
|
|
#define RCC_TIMPRE_BIT_NUMBER 0x18
|
|
#define RCC_DCKCFGR_TIMPRE_BB (PERIPH_BB_BASE + (RCC_DCKCFGR_OFFSET * 32) + (RCC_TIMPRE_BIT_NUMBER * 4))
|
|
#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F410xx || STM32F401xC ||\
|
|
STM32F401xE || STM32F411xE || STM32F446xx || STM32F469xx || STM32F479xx || STM32F412Zx ||\
|
|
STM32F412Vx || STM32F412Rx || STM32F412Cx */
|
|
|
|
/* --- CFGR Register ---*/
|
|
#define RCC_CFGR_OFFSET (RCC_OFFSET + 0x08U)
|
|
#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) || \
|
|
defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || \
|
|
defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE) || defined(STM32F446xx) || \
|
|
defined(STM32F469xx) || defined(STM32F479xx)
|
|
/* Alias word address of I2SSRC bit */
|
|
#define RCC_I2SSRC_BIT_NUMBER 0x17
|
|
#define RCC_CFGR_I2SSRC_BB (PERIPH_BB_BASE + (RCC_CFGR_OFFSET * 32) + (RCC_I2SSRC_BIT_NUMBER * 4))
|
|
|
|
#define PLLI2S_TIMEOUT_VALUE ((uint32_t)2) /* Timeout value fixed to 2 ms */
|
|
#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx ||
|
|
STM32F401xC || STM32F401xE || STM32F411xE || STM32F446xx || STM32F469xx || STM32F479xx */
|
|
|
|
#if defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx)
|
|
/* --- PLLI2SCFGR Register ---*/
|
|
#define RCC_PLLI2SCFGR_OFFSET (RCC_OFFSET + 0x84U)
|
|
/* Alias word address of PLLI2SSRC bit */
|
|
#define RCC_PLLI2SSRC_BIT_NUMBER 0x16
|
|
#define RCC_PLLI2SCFGR_PLLI2SSRC_BB (PERIPH_BB_BASE + (RCC_PLLI2SCFGR_OFFSET * 32) + (RCC_PLLI2SSRC_BIT_NUMBER * 4))
|
|
|
|
#define PLLI2S_TIMEOUT_VALUE ((uint32_t)2) /* Timeout value fixed to 2 ms */
|
|
#endif /* STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx */
|
|
|
|
#if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx)
|
|
/* Alias word address of MCO1EN bit */
|
|
#define RCC_MCO1EN_BIT_NUMBER 0x8
|
|
#define RCC_CFGR_MCO1EN_BB (PERIPH_BB_BASE + (RCC_CFGR_OFFSET * 32) + (RCC_MCO1EN_BIT_NUMBER * 4))
|
|
|
|
/* Alias word address of MCO2EN bit */
|
|
#define RCC_MCO2EN_BIT_NUMBER 0x9
|
|
#define RCC_CFGR_MCO2EN_BB (PERIPH_BB_BASE + (RCC_CFGR_OFFSET * 32) + (RCC_MCO2EN_BIT_NUMBER * 4))
|
|
#endif /* STM32F410Tx || STM32F410Cx || STM32F410Rx */
|
|
|
|
#define PLL_TIMEOUT_VALUE ((uint32_t)2) /* 2 ms */
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/* Private macros ------------------------------------------------------------*/
|
|
/** @defgroup RCCEx_Private_Macros RCCEx Private Macros
|
|
* @{
|
|
*/
|
|
/** @defgroup RCCEx_IS_RCC_Definitions RCC Private macros to check input parameters
|
|
* @{
|
|
*/
|
|
#if defined(STM32F411xE)
|
|
#define IS_RCC_PLLN_VALUE(VALUE) ((192U <= (VALUE)) && ((VALUE) <= 432U))
|
|
#define IS_RCC_PLLI2SN_VALUE(VALUE) ((192U <= (VALUE)) && ((VALUE) <= 432U))
|
|
#else /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F427xx || STM32F437xx ||
|
|
STM32F429xx || STM32F439xx || STM32F401xC || STM32F401xE || STM32F410Tx || STM32F410Cx ||
|
|
STM32F410Rx || STM32F446xx || STM32F469xx || STM32F479xx || STM32F412Cx || STM32F412Rx ||
|
|
STM32F412Vx || STM32F412Zx */
|
|
#define IS_RCC_PLLN_VALUE(VALUE) ((50U <= (VALUE)) && ((VALUE) <= 432U))
|
|
#define IS_RCC_PLLI2SN_VALUE(VALUE) ((50U <= (VALUE)) && ((VALUE) <= 432U))
|
|
#endif /* STM32F411xE */
|
|
|
|
#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx)|| defined(STM32F439xx)
|
|
#define IS_RCC_PERIPHCLOCK(SELECTION) ((1 <= (SELECTION)) && ((SELECTION) <= 0x0000007FU))
|
|
#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */
|
|
|
|
#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx)|| defined(STM32F417xx)
|
|
#define IS_RCC_PERIPHCLOCK(SELECTION) ((1 <= (SELECTION)) && ((SELECTION) <= 0x00000007U))
|
|
#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx */
|
|
|
|
#if defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE)
|
|
#define IS_RCC_PERIPHCLOCK(SELECTION) ((1 <= (SELECTION)) && ((SELECTION) <= 0x0000000FU))
|
|
#endif /* STM32F401xC || STM32F401xE || STM32F411xE */
|
|
|
|
#if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx)
|
|
#define IS_RCC_PERIPHCLOCK(SELECTION) ((1 <= (SELECTION)) && ((SELECTION) <= 0x0000001FU))
|
|
#endif /* STM32F410Tx || STM32F410Cx || STM32F410Rx */
|
|
|
|
#if defined(STM32F446xx)
|
|
#define IS_RCC_PERIPHCLOCK(SELECTION) ((1 <= (SELECTION)) && ((SELECTION) <= 0x00000FFFU))
|
|
#endif /* STM32F446xx */
|
|
|
|
#if defined(STM32F469xx) || defined(STM32F479xx)
|
|
#define IS_RCC_PERIPHCLOCK(SELECTION) ((1 <= (SELECTION)) && ((SELECTION) <= 0x000001FFU))
|
|
#endif /* STM32F469xx || STM32F479xx */
|
|
|
|
#if defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx)
|
|
#define IS_RCC_PERIPHCLOCK(SELECTION) ((1 <= (SELECTION)) && ((SELECTION) <= 0x000003FFU))
|
|
#endif /* STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx */
|
|
|
|
#define IS_RCC_PLLI2SR_VALUE(VALUE) ((2U <= (VALUE)) && ((VALUE) <= 7U))
|
|
|
|
#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx)|| defined(STM32F439xx) ||\
|
|
defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx)
|
|
#define IS_RCC_PLLI2SQ_VALUE(VALUE) ((2U <= (VALUE)) && ((VALUE) <= 15U))
|
|
|
|
#define IS_RCC_PLLSAIN_VALUE(VALUE) ((50U <= (VALUE)) && ((VALUE) <= 432U))
|
|
|
|
#define IS_RCC_PLLSAIQ_VALUE(VALUE) ((2U <= (VALUE)) && ((VALUE) <= 15U))
|
|
|
|
#define IS_RCC_PLLSAIR_VALUE(VALUE) ((2U <= (VALUE)) && ((VALUE) <= 7U))
|
|
|
|
#define IS_RCC_PLLSAI_DIVQ_VALUE(VALUE) ((1U <= (VALUE)) && ((VALUE) <= 32U))
|
|
|
|
#define IS_RCC_PLLI2S_DIVQ_VALUE(VALUE) ((1U <= (VALUE)) && ((VALUE) <= 32U))
|
|
|
|
#define IS_RCC_PLLSAI_DIVR_VALUE(VALUE) (((VALUE) == RCC_PLLSAIDIVR_2) ||\
|
|
((VALUE) == RCC_PLLSAIDIVR_4) ||\
|
|
((VALUE) == RCC_PLLSAIDIVR_8) ||\
|
|
((VALUE) == RCC_PLLSAIDIVR_16))
|
|
#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx || STM32F469xx || STM32F479xx */
|
|
|
|
#if defined(STM32F411xE) || defined(STM32F446xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || \
|
|
defined(STM32F412Rx) || defined(STM32F412Cx)
|
|
#define IS_RCC_PLLI2SM_VALUE(VALUE) ((VALUE) <= 63U)
|
|
|
|
#define IS_RCC_LSE_MODE(MODE) (((MODE) == RCC_LSE_LOWPOWER_MODE) ||\
|
|
((MODE) == RCC_LSE_HIGHDRIVE_MODE))
|
|
#endif /* STM32F411xE || STM32F446xx || STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx */
|
|
|
|
#if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx)
|
|
#define IS_RCC_PLLR_VALUE(VALUE) ((2U <= (VALUE)) && ((VALUE) <= 7U))
|
|
|
|
#define IS_RCC_LSE_MODE(MODE) (((MODE) == RCC_LSE_LOWPOWER_MODE) ||\
|
|
((MODE) == RCC_LSE_HIGHDRIVE_MODE))
|
|
|
|
#define IS_RCC_FMPI2C1CLKSOURCE(SOURCE) (((SOURCE) == RCC_FMPI2C1CLKSOURCE_APB) ||\
|
|
((SOURCE) == RCC_FMPI2C1CLKSOURCE_SYSCLK) ||\
|
|
((SOURCE) == RCC_FMPI2C1CLKSOURCE_HSI))
|
|
|
|
#define IS_RCC_LPTIM1CLKSOURCE(SOURCE) (((SOURCE) == RCC_LPTIM1CLKSOURCE_PCLK) ||\
|
|
((SOURCE) == RCC_LPTIM1CLKSOURCE_HSI) ||\
|
|
((SOURCE) == RCC_LPTIM1CLKSOURCE_LSI) ||\
|
|
((SOURCE) == RCC_LPTIM1CLKSOURCE_LSE))
|
|
|
|
#define IS_RCC_I2SAPBCLKSOURCE(SOURCE) (((SOURCE) == RCC_I2SAPBCLKSOURCE_PLLR) ||\
|
|
((SOURCE) == RCC_I2SAPBCLKSOURCE_EXT) ||\
|
|
((SOURCE) == RCC_I2SAPBCLKSOURCE_PLLSRC))
|
|
#endif /* STM32F410Tx || STM32F410Cx || STM32F410Rx */
|
|
|
|
#if defined(STM32F446xx)
|
|
#define IS_RCC_PLLR_VALUE(VALUE) ((2U <= (VALUE)) && ((VALUE) <= 7U))
|
|
|
|
#define IS_RCC_PLLI2SP_VALUE(VALUE) (((VALUE) == RCC_PLLI2SP_DIV2) ||\
|
|
((VALUE) == RCC_PLLI2SP_DIV4) ||\
|
|
((VALUE) == RCC_PLLI2SP_DIV6) ||\
|
|
((VALUE) == RCC_PLLI2SP_DIV8))
|
|
|
|
#define IS_RCC_PLLSAIM_VALUE(VALUE) ((VALUE) <= 63U)
|
|
|
|
#define IS_RCC_PLLSAIP_VALUE(VALUE) (((VALUE) == RCC_PLLSAIP_DIV2) ||\
|
|
((VALUE) == RCC_PLLSAIP_DIV4) ||\
|
|
((VALUE) == RCC_PLLSAIP_DIV6) ||\
|
|
((VALUE) == RCC_PLLSAIP_DIV8))
|
|
|
|
#define IS_RCC_SAI1CLKSOURCE(SOURCE) (((SOURCE) == RCC_SAI1CLKSOURCE_PLLSAI) ||\
|
|
((SOURCE) == RCC_SAI1CLKSOURCE_PLLI2S) ||\
|
|
((SOURCE) == RCC_SAI1CLKSOURCE_PLLR) ||\
|
|
((SOURCE) == RCC_SAI1CLKSOURCE_EXT))
|
|
|
|
#define IS_RCC_SAI2CLKSOURCE(SOURCE) (((SOURCE) == RCC_SAI2CLKSOURCE_PLLSAI) ||\
|
|
((SOURCE) == RCC_SAI2CLKSOURCE_PLLI2S) ||\
|
|
((SOURCE) == RCC_SAI2CLKSOURCE_PLLR) ||\
|
|
((SOURCE) == RCC_SAI2CLKSOURCE_PLLSRC))
|
|
|
|
#define IS_RCC_I2SAPB1CLKSOURCE(SOURCE) (((SOURCE) == RCC_I2SAPB1CLKSOURCE_PLLI2S) ||\
|
|
((SOURCE) == RCC_I2SAPB1CLKSOURCE_EXT) ||\
|
|
((SOURCE) == RCC_I2SAPB1CLKSOURCE_PLLR) ||\
|
|
((SOURCE) == RCC_I2SAPB1CLKSOURCE_PLLSRC))
|
|
|
|
#define IS_RCC_I2SAPB2CLKSOURCE(SOURCE) (((SOURCE) == RCC_I2SAPB2CLKSOURCE_PLLI2S) ||\
|
|
((SOURCE) == RCC_I2SAPB2CLKSOURCE_EXT) ||\
|
|
((SOURCE) == RCC_I2SAPB2CLKSOURCE_PLLR) ||\
|
|
((SOURCE) == RCC_I2SAPB2CLKSOURCE_PLLSRC))
|
|
|
|
#define IS_RCC_FMPI2C1CLKSOURCE(SOURCE) (((SOURCE) == RCC_FMPI2C1CLKSOURCE_APB) ||\
|
|
((SOURCE) == RCC_FMPI2C1CLKSOURCE_SYSCLK) ||\
|
|
((SOURCE) == RCC_FMPI2C1CLKSOURCE_HSI))
|
|
|
|
#define IS_RCC_CECCLKSOURCE(SOURCE) (((SOURCE) == RCC_CECCLKSOURCE_HSI) ||\
|
|
((SOURCE) == RCC_CECCLKSOURCE_LSE))
|
|
|
|
#define IS_RCC_CLK48CLKSOURCE(SOURCE) (((SOURCE) == RCC_CLK48CLKSOURCE_PLLQ) ||\
|
|
((SOURCE) == RCC_CLK48CLKSOURCE_PLLSAIP))
|
|
|
|
#define IS_RCC_SDIOCLKSOURCE(SOURCE) (((SOURCE) == RCC_SDIOCLKSOURCE_CLK48) ||\
|
|
((SOURCE) == RCC_SDIOCLKSOURCE_SYSCLK))
|
|
|
|
#define IS_RCC_SPDIFRXCLKSOURCE(SOURCE) (((SOURCE) == RCC_SPDIFRXCLKSOURCE_PLLR) ||\
|
|
((SOURCE) == RCC_SPDIFRXCLKSOURCE_PLLI2SP))
|
|
#endif /* STM32F446xx */
|
|
|
|
#if defined(STM32F469xx) || defined(STM32F479xx)
|
|
#define IS_RCC_PLLR_VALUE(VALUE) ((2U <= (VALUE)) && ((VALUE) <= 7U))
|
|
|
|
#define IS_RCC_PLLSAIP_VALUE(VALUE) (((VALUE) == RCC_PLLSAIP_DIV2) ||\
|
|
((VALUE) == RCC_PLLSAIP_DIV4) ||\
|
|
((VALUE) == RCC_PLLSAIP_DIV6) ||\
|
|
((VALUE) == RCC_PLLSAIP_DIV8))
|
|
|
|
#define IS_RCC_CLK48CLKSOURCE(SOURCE) (((SOURCE) == RCC_CLK48CLKSOURCE_PLLQ) ||\
|
|
((SOURCE) == RCC_CLK48CLKSOURCE_PLLSAIP))
|
|
|
|
#define IS_RCC_SDIOCLKSOURCE(SOURCE) (((SOURCE) == RCC_SDIOCLKSOURCE_CLK48) ||\
|
|
((SOURCE) == RCC_SDIOCLKSOURCE_SYSCLK))
|
|
|
|
#define IS_RCC_DSIBYTELANECLKSOURCE(SOURCE) (((SOURCE) == RCC_DSICLKSOURCE_PLLR) ||\
|
|
((SOURCE) == RCC_DSICLKSOURCE_DSIPHY))
|
|
|
|
#define IS_RCC_LSE_MODE(MODE) (((MODE) == RCC_LSE_LOWPOWER_MODE) ||\
|
|
((MODE) == RCC_LSE_HIGHDRIVE_MODE))
|
|
#endif /* STM32F469xx || STM32F479xx */
|
|
|
|
#if defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx)
|
|
#define IS_RCC_PLLR_VALUE(VALUE) ((2U <= (VALUE)) && ((VALUE) <= 7U))
|
|
|
|
#define IS_RCC_PLLI2SCLKSOURCE(__SOURCE__) (((__SOURCE__) == RCC_PLLI2SCLKSOURCE_PLLSRC) || \
|
|
((__SOURCE__) == RCC_PLLI2SCLKSOURCE_EXT))
|
|
|
|
#define IS_RCC_I2SAPB1CLKSOURCE(SOURCE) (((SOURCE) == RCC_I2SAPB1CLKSOURCE_PLLI2S) ||\
|
|
((SOURCE) == RCC_I2SAPB1CLKSOURCE_EXT) ||\
|
|
((SOURCE) == RCC_I2SAPB1CLKSOURCE_PLLR) ||\
|
|
((SOURCE) == RCC_I2SAPB1CLKSOURCE_PLLSRC))
|
|
|
|
#define IS_RCC_I2SAPB2CLKSOURCE(SOURCE) (((SOURCE) == RCC_I2SAPB2CLKSOURCE_PLLI2S) ||\
|
|
((SOURCE) == RCC_I2SAPB2CLKSOURCE_EXT) ||\
|
|
((SOURCE) == RCC_I2SAPB2CLKSOURCE_PLLR) ||\
|
|
((SOURCE) == RCC_I2SAPB2CLKSOURCE_PLLSRC))
|
|
|
|
#define IS_RCC_FMPI2C1CLKSOURCE(SOURCE) (((SOURCE) == RCC_FMPI2C1CLKSOURCE_APB) ||\
|
|
((SOURCE) == RCC_FMPI2C1CLKSOURCE_SYSCLK) ||\
|
|
((SOURCE) == RCC_FMPI2C1CLKSOURCE_HSI))
|
|
|
|
#define IS_RCC_CLK48CLKSOURCE(SOURCE) (((SOURCE) == RCC_CLK48CLKSOURCE_PLLQ) ||\
|
|
((SOURCE) == RCC_CLK48CLKSOURCE_PLLI2SQ))
|
|
|
|
#define IS_RCC_SDIOCLKSOURCE(SOURCE) (((SOURCE) == RCC_SDIOCLKSOURCE_CLK48) ||\
|
|
((SOURCE) == RCC_SDIOCLKSOURCE_SYSCLK))
|
|
|
|
#define IS_RCC_DFSDM1CLKSOURCE(__SOURCE__) (((__SOURCE__) == RCC_DFSDM1CLKSOURCE_APB2) || \
|
|
((__SOURCE__) == RCC_DFSDM1CLKSOURCE_SYSCLK))
|
|
|
|
#define IS_RCC_DFSDM1AUDIOCLKSOURCE(__SOURCE__) (((__SOURCE__) == RCC_DFSDM1AUDIOCLKSOURCE_I2SAPB1) || \
|
|
((__SOURCE__) == RCC_DFSDM1AUDIOCLKSOURCE_I2SAPB2))
|
|
|
|
#endif /* STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx */
|
|
|
|
#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) || \
|
|
defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || \
|
|
defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE) || defined(STM32F446xx) || \
|
|
defined(STM32F469xx) || defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || \
|
|
defined(STM32F412Rx)
|
|
|
|
#define IS_RCC_MCO2SOURCE(SOURCE) (((SOURCE) == RCC_MCO2SOURCE_SYSCLK) || ((SOURCE) == RCC_MCO2SOURCE_PLLI2SCLK)|| \
|
|
((SOURCE) == RCC_MCO2SOURCE_HSE) || ((SOURCE) == RCC_MCO2SOURCE_PLLCLK))
|
|
|
|
#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx ||
|
|
STM32F401xC || STM32F401xE || STM32F411xE || STM32F446xx || STM32F469xx || STM32F479xx || STM32F412Zx || STM32F412Vx || \
|
|
STM32F412Rx */
|
|
|
|
#if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx)
|
|
#define IS_RCC_MCO2SOURCE(SOURCE) (((SOURCE) == RCC_MCO2SOURCE_SYSCLK) || ((SOURCE) == RCC_MCO2SOURCE_I2SCLK)|| \
|
|
((SOURCE) == RCC_MCO2SOURCE_HSE) || ((SOURCE) == RCC_MCO2SOURCE_PLLCLK))
|
|
#endif /* STM32F410Tx || STM32F410Cx || STM32F410Rx */
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
#ifdef __cplusplus
|
|
}
|
|
#endif
|
|
|
|
#endif /* __STM32F4xx_HAL_RCC_EX_H */
|
|
|
|
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|