micropython/ports/stm32/boards/stm32wbxx_hal_conf_base.h

121 lines
4.3 KiB
C

/*
* This file is part of the MicroPython project, http://micropython.org/
*
* The MIT License (MIT)
*
* Copyright (c) 2019 Damien P. George
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/
#ifndef MICROPY_INCLUDED_STM32WBXX_HAL_CONF_BASE_H
#define MICROPY_INCLUDED_STM32WBXX_HAL_CONF_BASE_H
// Enable various HAL modules
#define HAL_MODULE_ENABLED
#define HAL_ADC_MODULE_ENABLED
#define HAL_CORTEX_MODULE_ENABLED
#define HAL_DMA_MODULE_ENABLED
#define HAL_FLASH_MODULE_ENABLED
#define HAL_GPIO_MODULE_ENABLED
#define HAL_I2C_MODULE_ENABLED
#define HAL_PCD_MODULE_ENABLED
#define HAL_PWR_MODULE_ENABLED
#define HAL_RCC_MODULE_ENABLED
#define HAL_RTC_MODULE_ENABLED
#define HAL_SPI_MODULE_ENABLED
#define HAL_TIM_MODULE_ENABLED
#define HAL_UART_MODULE_ENABLED
#define HAL_USART_MODULE_ENABLED
// Oscillator values in Hz
#define MSI_VALUE (4000000)
// SysTick has the highest priority
#define TICK_INT_PRIORITY (0x00)
// Miscellaneous HAL settings
#define DATA_CACHE_ENABLE 1
#define INSTRUCTION_CACHE_ENABLE 1
#define PREFETCH_ENABLE 0
#define USE_SPI_CRC 0
#define USE_RTOS 0
// Include various HAL modules for convenience
#include "stm32wbxx_hal_dma.h"
#include "stm32wbxx_hal_adc.h"
#include "stm32wbxx_hal_cortex.h"
#include "stm32wbxx_hal_flash.h"
#include "stm32wbxx_hal_gpio.h"
#include "stm32wbxx_hal_i2c.h"
#include "stm32wbxx_hal_pcd.h"
#include "stm32wbxx_hal_pwr.h"
#include "stm32wbxx_hal_rcc.h"
#include "stm32wbxx_hal_rtc.h"
#include "stm32wbxx_hal_spi.h"
#include "stm32wbxx_hal_tim.h"
#include "stm32wbxx_hal_uart.h"
#include "stm32wbxx_hal_usart.h"
#include "stm32wbxx_ll_adc.h"
#include "stm32wbxx_ll_hsem.h"
#include "stm32wbxx_ll_lpuart.h"
#include "stm32wbxx_ll_rtc.h"
#include "stm32wbxx_ll_usart.h"
// HAL parameter assertions are disabled
#define assert_param(expr) ((void)0)
// Hardware Semaphores - ref: AN5289
// Used to prevent conflicts after standby / sleep.
// Each CPUs takes this semaphore at standby wakeup until conflicting elements are restored.
// Note: this is used in WB55 reference examples, but not listed in AN5289 Rev 6
#define CFG_HW_PWR_STANDBY_SEMID 10
// Ensures that CPU2 does not update the BLE persistent data in SRAM2 when CPU1 is reading them
#define CFG_HW_THREAD_NVM_SRAM_SEMID 9
// Ensures that CPU2 does not update the Thread persistent data in SRAM2 when CPU1 is reading them
#define CFG_HW_BLE_NVM_SRAM_SEMID 8
// Used by CPU2 to prevent CPU1 from writing/erasing data in Flash memory
#define CFG_HW_BLOCK_FLASH_REQ_BY_CPU2_SEMID 7
// Used by CPU1 to prevent CPU2 from writing/erasing data in Flash memory
#define CFG_HW_BLOCK_FLASH_REQ_BY_CPU1_SEMID 6
// Used to manage the CLK48 clock configuration (RCC_CRRCR, RCC_CCIPR)
#define CFG_HW_CLK48_CONFIG_SEMID 5
// Used to manage the entry Stop Mode procedure
#define CFG_HW_ENTRY_STOP_MODE_SEMID 4
// Used to access the RCC (RCC_CR, RCC_EXTCFGR, RCC_CFGR, RCC_SMPSCR)
#define CFG_HW_RCC_SEMID 3
// Used to access the FLASH (all registers)
#define CFG_HW_FLASH_SEMID 2
// Used to access the PKA (all registers)
#define CFG_HW_PKA_SEMID 1
// Used to access the RNG (all registers)
#define CFG_HW_RNG_SEMID 0
#endif // MICROPY_INCLUDED_STM32WBXX_HAL_CONF_BASE_H