360 lines
16 KiB
C
360 lines
16 KiB
C
/*
|
|
* Copyright 2018-2019 NXP
|
|
* All rights reserved.
|
|
*
|
|
* SPDX-License-Identifier: BSD-3-Clause
|
|
*/
|
|
|
|
/*
|
|
* How to setup clock using clock driver functions:
|
|
*
|
|
* 1. Call CLOCK_InitXXXPLL() to configure corresponding PLL clock.
|
|
*
|
|
* 2. Call CLOCK_InitXXXpfd() to configure corresponding PLL pfd clock.
|
|
*
|
|
* 3. Call CLOCK_SetMux() to configure corresponding clock source for target clock out.
|
|
*
|
|
* 4. Call CLOCK_SetDiv() to configure corresponding clock divider for target clock out.
|
|
*
|
|
* 5. Call CLOCK_SetXtalFreq() to set XTAL frequency based on board settings.
|
|
*
|
|
*/
|
|
|
|
/* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
|
|
!!GlobalInfo
|
|
product: Clocks v5.0
|
|
processor: MIMXRT1015xxxxx
|
|
package_id: MIMXRT1015DAF5A
|
|
mcu_data: ksdk2_0
|
|
processor_version: 0.0.0
|
|
board: MIMXRT1015-EVK
|
|
* BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS **********/
|
|
|
|
#include CLOCK_CONFIG_H
|
|
#include "fsl_iomuxc.h"
|
|
|
|
/*******************************************************************************
|
|
* Definitions
|
|
******************************************************************************/
|
|
|
|
/*******************************************************************************
|
|
* Variables
|
|
******************************************************************************/
|
|
/* System clock frequency. */
|
|
extern uint32_t SystemCoreClock;
|
|
|
|
/*******************************************************************************
|
|
************************ BOARD_InitBootClocks function ************************
|
|
******************************************************************************/
|
|
void BOARD_InitBootClocks(void) {
|
|
BOARD_BootClockRUN();
|
|
}
|
|
|
|
/*******************************************************************************
|
|
********************** Configuration BOARD_BootClockRUN ***********************
|
|
******************************************************************************/
|
|
/* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
|
|
!!Configuration
|
|
name: BOARD_BootClockRUN
|
|
called_from_default_init: true
|
|
outputs:
|
|
- {id: AHB_CLK_ROOT.outFreq, value: 500 MHz}
|
|
- {id: CKIL_SYNC_CLK_ROOT.outFreq, value: 32.768 kHz}
|
|
- {id: CLK_1M.outFreq, value: 1 MHz}
|
|
- {id: CLK_24M.outFreq, value: 24 MHz}
|
|
- {id: ENET_500M_REF_CLK.outFreq, value: 500 MHz}
|
|
- {id: FLEXIO1_CLK_ROOT.outFreq, value: 30 MHz}
|
|
- {id: FLEXSPI_CLK_ROOT.outFreq, value: 125 MHz}
|
|
- {id: GPT1_ipg_clk_highfreq.outFreq, value: 62.5 MHz}
|
|
- {id: GPT2_ipg_clk_highfreq.outFreq, value: 62.5 MHz}
|
|
- {id: IPG_CLK_ROOT.outFreq, value: 125 MHz}
|
|
- {id: LPI2C_CLK_ROOT.outFreq, value: 60 MHz}
|
|
- {id: LPSPI_CLK_ROOT.outFreq, value: 105.6 MHz}
|
|
- {id: MQS_MCLK.outFreq, value: 1080/17 MHz}
|
|
- {id: PERCLK_CLK_ROOT.outFreq, value: 62.5 MHz}
|
|
- {id: SAI1_CLK_ROOT.outFreq, value: 1080/17 MHz}
|
|
- {id: SAI1_MCLK1.outFreq, value: 1080/17 MHz}
|
|
- {id: SAI1_MCLK2.outFreq, value: 1080/17 MHz}
|
|
- {id: SAI1_MCLK3.outFreq, value: 30 MHz}
|
|
- {id: SAI2_CLK_ROOT.outFreq, value: 1080/17 MHz}
|
|
- {id: SAI2_MCLK1.outFreq, value: 1080/17 MHz}
|
|
- {id: SAI2_MCLK3.outFreq, value: 30 MHz}
|
|
- {id: SAI3_CLK_ROOT.outFreq, value: 1080/17 MHz}
|
|
- {id: SAI3_MCLK1.outFreq, value: 1080/17 MHz}
|
|
- {id: SAI3_MCLK3.outFreq, value: 30 MHz}
|
|
- {id: SPDIF0_CLK_ROOT.outFreq, value: 30 MHz}
|
|
- {id: TRACE_CLK_ROOT.outFreq, value: 352/3 MHz}
|
|
- {id: UART_CLK_ROOT.outFreq, value: 80 MHz}
|
|
settings:
|
|
- {id: CCM.AHB_PODF.scale, value: '1', locked: true}
|
|
- {id: CCM.ARM_PODF.scale, value: '1', locked: true}
|
|
- {id: CCM.CLKO2_SEL.sel, value: CCM.LPI2C_CLK_ROOT}
|
|
- {id: CCM.FLEXSPI_PODF.scale, value: '2', locked: true}
|
|
- {id: CCM.IPG_PODF.scale, value: '4'}
|
|
- {id: CCM.LPSPI_PODF.scale, value: '5', locked: true}
|
|
- {id: CCM.PERCLK_PODF.scale, value: '2', locked: true}
|
|
- {id: CCM.PRE_PERIPH_CLK_SEL.sel, value: CCM.ARM_PODF}
|
|
- {id: CCM.SEMC_PODF.scale, value: '2'}
|
|
- {id: CCM.TRACE_PODF.scale, value: '3', locked: true}
|
|
- {id: CCM_ANALOG.PLL2.denom, value: '1', locked: true}
|
|
- {id: CCM_ANALOG.PLL2.num, value: '0', locked: true}
|
|
- {id: CCM_ANALOG.PLL2_BYPASS.sel, value: CCM_ANALOG.PLL2_OUT_CLK}
|
|
- {id: CCM_ANALOG.PLL2_PFD0_BYPASS.sel, value: CCM_ANALOG.PLL2_PFD0}
|
|
- {id: CCM_ANALOG.PLL2_PFD1_BYPASS.sel, value: CCM_ANALOG.PLL2_PFD1}
|
|
- {id: CCM_ANALOG.PLL2_PFD2_BYPASS.sel, value: CCM_ANALOG.PLL2_PFD2}
|
|
- {id: CCM_ANALOG.PLL2_PFD2_DIV.scale, value: '18', locked: true}
|
|
- {id: CCM_ANALOG.PLL2_PFD2_MUL.scale, value: '18', locked: true}
|
|
- {id: CCM_ANALOG.PLL2_PFD3_BYPASS.sel, value: CCM_ANALOG.PLL2_PFD3}
|
|
- {id: CCM_ANALOG.PLL2_PFD3_DIV.scale, value: '18', locked: true}
|
|
- {id: CCM_ANALOG.PLL2_PFD3_MUL.scale, value: '18', locked: true}
|
|
- {id: CCM_ANALOG.PLL3_BYPASS.sel, value: CCM_ANALOG.PLL3}
|
|
- {id: CCM_ANALOG.PLL3_PFD0_BYPASS.sel, value: CCM_ANALOG.PLL3_PFD0}
|
|
- {id: CCM_ANALOG.PLL3_PFD0_DIV.scale, value: '22', locked: true}
|
|
- {id: CCM_ANALOG.PLL3_PFD0_MUL.scale, value: '18', locked: true}
|
|
- {id: CCM_ANALOG.PLL3_PFD1_BYPASS.sel, value: CCM_ANALOG.PLL3_PFD1}
|
|
- {id: CCM_ANALOG.PLL3_PFD2_BYPASS.sel, value: CCM_ANALOG.PLL3_PFD2}
|
|
- {id: CCM_ANALOG.PLL3_PFD3_BYPASS.sel, value: CCM_ANALOG.PLL3_PFD3}
|
|
- {id: CCM_ANALOG.PLL3_PFD3_DIV.scale, value: '18', locked: true}
|
|
- {id: CCM_ANALOG.PLL3_PFD3_MUL.scale, value: '18', locked: true}
|
|
- {id: CCM_ANALOG.PLL4.denom, value: '50'}
|
|
- {id: CCM_ANALOG.PLL4.div, value: '47'}
|
|
- {id: CCM_ANALOG.PLL6_BYPASS.sel, value: CCM_ANALOG.PLL6}
|
|
- {id: CCM_ANALOG_PLL_USB1_POWER_CFG, value: 'Yes'}
|
|
sources:
|
|
- {id: XTALOSC24M.OSC.outFreq, value: 24 MHz, enabled: true}
|
|
- {id: XTALOSC24M.RTC_OSC.outFreq, value: 32.768 kHz, enabled: true}
|
|
* BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS **********/
|
|
|
|
/*******************************************************************************
|
|
* Variables for BOARD_BootClockRUN configuration
|
|
******************************************************************************/
|
|
const clock_sys_pll_config_t sysPllConfig_BOARD_BootClockRUN = {
|
|
.loopDivider = 1, /* PLL loop divider, Fout = Fin * ( 20 + loopDivider*2 + numerator / denominator ) */
|
|
.numerator = 0, /* 30 bit numerator of fractional loop divider */
|
|
.denominator = 1, /* 30 bit denominator of fractional loop divider */
|
|
.src = 0, /* Bypass clock source, 0 - OSC 24M, 1 - CLK1_P and CLK1_N */
|
|
};
|
|
const clock_usb_pll_config_t usb1PllConfig_BOARD_BootClockRUN = {
|
|
.loopDivider = 0, /* PLL loop divider, Fout = Fin * 20 */
|
|
.src = 0, /* Bypass clock source, 0 - OSC 24M, 1 - CLK1_P and CLK1_N */
|
|
};
|
|
const clock_enet_pll_config_t enetPllConfig_BOARD_BootClockRUN = {
|
|
.enableClkOutput500M = true, /* Enable the PLL providing the ENET 500MHz reference clock */
|
|
.src = 0, /* Bypass clock source, 0 - OSC 24M, 1 - CLK1_P and CLK1_N */
|
|
};
|
|
/*******************************************************************************
|
|
* Code for BOARD_BootClockRUN configuration
|
|
******************************************************************************/
|
|
void BOARD_BootClockRUN(void) {
|
|
/* Init RTC OSC clock frequency. */
|
|
CLOCK_SetRtcXtalFreq(32768U);
|
|
/* Enable 1MHz clock output. */
|
|
XTALOSC24M->OSC_CONFIG2 |= XTALOSC24M_OSC_CONFIG2_ENABLE_1M_MASK;
|
|
/* Use free 1MHz clock output. */
|
|
XTALOSC24M->OSC_CONFIG2 &= ~XTALOSC24M_OSC_CONFIG2_MUX_1M_MASK;
|
|
/* Set XTAL 24MHz clock frequency. */
|
|
CLOCK_SetXtalFreq(24000000U);
|
|
/* Enable XTAL 24MHz clock source. */
|
|
CLOCK_InitExternalClk(0);
|
|
/* Enable internal RC. */
|
|
CLOCK_InitRcOsc24M();
|
|
/* Switch clock source to external OSC. */
|
|
CLOCK_SwitchOsc(kCLOCK_XtalOsc);
|
|
/* Set Oscillator ready counter value. */
|
|
CCM->CCR = (CCM->CCR & (~CCM_CCR_OSCNT_MASK)) | CCM_CCR_OSCNT(127);
|
|
/* Setting PeriphClk2Mux and PeriphMux to provide stable clock before PLLs are initialed */
|
|
CLOCK_SetMux(kCLOCK_PeriphClk2Mux, 1); /* Set PERIPH_CLK2 MUX to OSC */
|
|
CLOCK_SetMux(kCLOCK_PeriphMux, 1); /* Set PERIPH_CLK MUX to PERIPH_CLK2 */
|
|
/* Setting the VDD_SOC to 1.5V. It is necessary to config AHB to 500Mhz. */
|
|
DCDC->REG3 = (DCDC->REG3 & (~DCDC_REG3_TRG_MASK)) | DCDC_REG3_TRG(0x12);
|
|
/* Waiting for DCDC_STS_DC_OK bit is asserted */
|
|
while (DCDC_REG0_STS_DC_OK_MASK != (DCDC_REG0_STS_DC_OK_MASK & DCDC->REG0)) {
|
|
}
|
|
/* Set AHB_PODF. */
|
|
CLOCK_SetDiv(kCLOCK_AhbDiv, 0);
|
|
/* Disable IPG clock gate. */
|
|
CLOCK_DisableClock(kCLOCK_Adc1);
|
|
CLOCK_DisableClock(kCLOCK_Xbar1);
|
|
CLOCK_DisableClock(kCLOCK_Xbar2);
|
|
/* Set IPG_PODF. */
|
|
CLOCK_SetDiv(kCLOCK_IpgDiv, 3);
|
|
/* Set ARM_PODF. */
|
|
CLOCK_SetDiv(kCLOCK_ArmDiv, 0);
|
|
/* Set PERIPH_CLK2_PODF. */
|
|
CLOCK_SetDiv(kCLOCK_PeriphClk2Div, 0);
|
|
/* Disable PERCLK clock gate. */
|
|
CLOCK_DisableClock(kCLOCK_Gpt1);
|
|
CLOCK_DisableClock(kCLOCK_Gpt1S);
|
|
CLOCK_DisableClock(kCLOCK_Gpt2);
|
|
CLOCK_DisableClock(kCLOCK_Gpt2S);
|
|
CLOCK_DisableClock(kCLOCK_Pit);
|
|
/* Set PERCLK_PODF. */
|
|
CLOCK_SetDiv(kCLOCK_PerclkDiv, 1);
|
|
/* Set SEMC_PODF. */
|
|
CLOCK_SetDiv(kCLOCK_SemcDiv, 1);
|
|
/* Set Semc alt clock source. */
|
|
CLOCK_SetMux(kCLOCK_SemcAltMux, 0);
|
|
/* Set Semc clock source. */
|
|
CLOCK_SetMux(kCLOCK_SemcMux, 0);
|
|
/* In SDK projects, external flash (configured by FLEXSPI) will be initialized by dcd.
|
|
* With this macro XIP_EXTERNAL_FLASH, usb1 pll (selected to be FLEXSPI clock source in SDK projects) will be left unchanged.
|
|
* Note: If another clock source is selected for FLEXSPI, user may want to avoid changing that clock as well.*/
|
|
#if !(defined(XIP_EXTERNAL_FLASH) && (XIP_EXTERNAL_FLASH == 1))
|
|
/* Disable Flexspi clock gate. */
|
|
CLOCK_DisableClock(kCLOCK_FlexSpi);
|
|
/* Set FLEXSPI_PODF. */
|
|
CLOCK_SetDiv(kCLOCK_FlexspiDiv, 1);
|
|
/* Set Flexspi clock source. */
|
|
CLOCK_SetMux(kCLOCK_FlexspiMux, 0);
|
|
#endif
|
|
/* Disable LPSPI clock gate. */
|
|
CLOCK_DisableClock(kCLOCK_Lpspi1);
|
|
CLOCK_DisableClock(kCLOCK_Lpspi2);
|
|
/* Set LPSPI_PODF. */
|
|
CLOCK_SetDiv(kCLOCK_LpspiDiv, 4);
|
|
/* Set Lpspi clock source. */
|
|
CLOCK_SetMux(kCLOCK_LpspiMux, 2);
|
|
/* Disable TRACE clock gate. */
|
|
CLOCK_DisableClock(kCLOCK_Trace);
|
|
/* Set TRACE_PODF. */
|
|
CLOCK_SetDiv(kCLOCK_TraceDiv, 2);
|
|
/* Set Trace clock source. */
|
|
CLOCK_SetMux(kCLOCK_TraceMux, 2);
|
|
/* Disable SAI1 clock gate. */
|
|
CLOCK_DisableClock(kCLOCK_Sai1);
|
|
/* Set SAI1_CLK_PRED. */
|
|
CLOCK_SetDiv(kCLOCK_Sai1PreDiv, 3);
|
|
/* Set SAI1_CLK_PODF. */
|
|
CLOCK_SetDiv(kCLOCK_Sai1Div, 1);
|
|
/* Set Sai1 clock source. */
|
|
CLOCK_SetMux(kCLOCK_Sai1Mux, 0);
|
|
/* Disable SAI2 clock gate. */
|
|
CLOCK_DisableClock(kCLOCK_Sai2);
|
|
/* Set SAI2_CLK_PRED. */
|
|
CLOCK_SetDiv(kCLOCK_Sai2PreDiv, 3);
|
|
/* Set SAI2_CLK_PODF. */
|
|
CLOCK_SetDiv(kCLOCK_Sai2Div, 1);
|
|
/* Set Sai2 clock source. */
|
|
CLOCK_SetMux(kCLOCK_Sai2Mux, 0);
|
|
/* Disable SAI3 clock gate. */
|
|
CLOCK_DisableClock(kCLOCK_Sai3);
|
|
/* Set SAI3_CLK_PRED. */
|
|
CLOCK_SetDiv(kCLOCK_Sai3PreDiv, 3);
|
|
/* Set SAI3_CLK_PODF. */
|
|
CLOCK_SetDiv(kCLOCK_Sai3Div, 1);
|
|
/* Set Sai3 clock source. */
|
|
CLOCK_SetMux(kCLOCK_Sai3Mux, 0);
|
|
/* Disable Lpi2c clock gate. */
|
|
CLOCK_DisableClock(kCLOCK_Lpi2c1);
|
|
CLOCK_DisableClock(kCLOCK_Lpi2c2);
|
|
/* Set LPI2C_CLK_PODF. */
|
|
CLOCK_SetDiv(kCLOCK_Lpi2cDiv, 0);
|
|
/* Set Lpi2c clock source. */
|
|
CLOCK_SetMux(kCLOCK_Lpi2cMux, 0);
|
|
/* Disable UART clock gate. */
|
|
CLOCK_DisableClock(kCLOCK_Lpuart1);
|
|
CLOCK_DisableClock(kCLOCK_Lpuart2);
|
|
CLOCK_DisableClock(kCLOCK_Lpuart3);
|
|
CLOCK_DisableClock(kCLOCK_Lpuart4);
|
|
/* Set UART_CLK_PODF. */
|
|
CLOCK_SetDiv(kCLOCK_UartDiv, 1);
|
|
/* Set Uart clock source. */
|
|
CLOCK_SetMux(kCLOCK_UartMux, 0);
|
|
/* Disable SPDIF clock gate. */
|
|
CLOCK_DisableClock(kCLOCK_Spdif);
|
|
/* Set SPDIF0_CLK_PRED. */
|
|
CLOCK_SetDiv(kCLOCK_Spdif0PreDiv, 1);
|
|
/* Set SPDIF0_CLK_PODF. */
|
|
CLOCK_SetDiv(kCLOCK_Spdif0Div, 7);
|
|
/* Set Spdif clock source. */
|
|
CLOCK_SetMux(kCLOCK_SpdifMux, 3);
|
|
/* Disable Flexio1 clock gate. */
|
|
CLOCK_DisableClock(kCLOCK_Flexio1);
|
|
/* Set FLEXIO1_CLK_PRED. */
|
|
CLOCK_SetDiv(kCLOCK_Flexio1PreDiv, 1);
|
|
/* Set FLEXIO1_CLK_PODF. */
|
|
CLOCK_SetDiv(kCLOCK_Flexio1Div, 7);
|
|
/* Set Flexio1 clock source. */
|
|
CLOCK_SetMux(kCLOCK_Flexio1Mux, 3);
|
|
/* Set Pll3 sw clock source. */
|
|
CLOCK_SetMux(kCLOCK_Pll3SwMux, 0);
|
|
/* Init System PLL. */
|
|
CLOCK_InitSysPll(&sysPllConfig_BOARD_BootClockRUN);
|
|
/* Init System pfd0. */
|
|
CLOCK_InitSysPfd(kCLOCK_Pfd0, 27);
|
|
/* Init System pfd1. */
|
|
CLOCK_InitSysPfd(kCLOCK_Pfd1, 16);
|
|
/* Init System pfd2. */
|
|
CLOCK_InitSysPfd(kCLOCK_Pfd2, 18);
|
|
/* Init System pfd3. */
|
|
CLOCK_InitSysPfd(kCLOCK_Pfd3, 18);
|
|
/* In SDK projects, external flash (configured by FLEXSPI) will be initialized by dcd.
|
|
* With this macro XIP_EXTERNAL_FLASH, usb1 pll (selected to be FLEXSPI clock source in SDK projects) will be left unchanged.
|
|
* Note: If another clock source is selected for FLEXSPI, user may want to avoid changing that clock as well.*/
|
|
#if !(defined(XIP_EXTERNAL_FLASH) && (XIP_EXTERNAL_FLASH == 1))
|
|
/* Init Usb1 PLL. */
|
|
CLOCK_InitUsb1Pll(&usb1PllConfig_BOARD_BootClockRUN);
|
|
/* Init Usb1 pfd0. */
|
|
CLOCK_InitUsb1Pfd(kCLOCK_Pfd0, 22);
|
|
/* Init Usb1 pfd1. */
|
|
CLOCK_InitUsb1Pfd(kCLOCK_Pfd1, 16);
|
|
/* Init Usb1 pfd2. */
|
|
CLOCK_InitUsb1Pfd(kCLOCK_Pfd2, 17);
|
|
/* Init Usb1 pfd3. */
|
|
CLOCK_InitUsb1Pfd(kCLOCK_Pfd3, 18);
|
|
/* Disable Usb1 PLL output for USBPHY1. */
|
|
CCM_ANALOG->PLL_USB1 &= ~CCM_ANALOG_PLL_USB1_EN_USB_CLKS_MASK;
|
|
#endif
|
|
/* DeInit Audio PLL. */
|
|
CLOCK_DeinitAudioPll();
|
|
/* Bypass Audio PLL. */
|
|
CLOCK_SetPllBypass(CCM_ANALOG, kCLOCK_PllAudio, 1);
|
|
/* Set divider for Audio PLL. */
|
|
CCM_ANALOG->MISC2 &= ~CCM_ANALOG_MISC2_AUDIO_DIV_LSB_MASK;
|
|
CCM_ANALOG->MISC2 &= ~CCM_ANALOG_MISC2_AUDIO_DIV_MSB_MASK;
|
|
/* Enable Audio PLL output. */
|
|
CCM_ANALOG->PLL_AUDIO |= CCM_ANALOG_PLL_AUDIO_ENABLE_MASK;
|
|
/* Init Enet PLL. */
|
|
CLOCK_InitEnetPll(&enetPllConfig_BOARD_BootClockRUN);
|
|
/* Set preperiph clock source. */
|
|
CLOCK_SetMux(kCLOCK_PrePeriphMux, 3);
|
|
/* Set periph clock source. */
|
|
CLOCK_SetMux(kCLOCK_PeriphMux, 0);
|
|
/* Set periph clock2 clock source. */
|
|
CLOCK_SetMux(kCLOCK_PeriphClk2Mux, 0);
|
|
/* Set per clock source. */
|
|
CLOCK_SetMux(kCLOCK_PerclkMux, 0);
|
|
/* Set clock out1 divider. */
|
|
CCM->CCOSR = (CCM->CCOSR & (~CCM_CCOSR_CLKO1_DIV_MASK)) | CCM_CCOSR_CLKO1_DIV(0);
|
|
/* Set clock out1 source. */
|
|
CCM->CCOSR = (CCM->CCOSR & (~CCM_CCOSR_CLKO1_SEL_MASK)) | CCM_CCOSR_CLKO1_SEL(1);
|
|
/* Set clock out2 divider. */
|
|
CCM->CCOSR = (CCM->CCOSR & (~CCM_CCOSR_CLKO2_DIV_MASK)) | CCM_CCOSR_CLKO2_DIV(0);
|
|
/* Set clock out2 source. */
|
|
CCM->CCOSR = (CCM->CCOSR & (~CCM_CCOSR_CLKO2_SEL_MASK)) | CCM_CCOSR_CLKO2_SEL(6);
|
|
/* Set clock out1 drives clock out1. */
|
|
CCM->CCOSR &= ~CCM_CCOSR_CLK_OUT_SEL_MASK;
|
|
/* Disable clock out1. */
|
|
CCM->CCOSR &= ~CCM_CCOSR_CLKO1_EN_MASK;
|
|
/* Disable clock out2. */
|
|
CCM->CCOSR &= ~CCM_CCOSR_CLKO2_EN_MASK;
|
|
/* Set SAI1 MCLK1 clock source. */
|
|
IOMUXC_SetSaiMClkClockSource(IOMUXC_GPR, kIOMUXC_GPR_SAI1MClk1Sel, 0);
|
|
/* Set SAI1 MCLK2 clock source. */
|
|
IOMUXC_SetSaiMClkClockSource(IOMUXC_GPR, kIOMUXC_GPR_SAI1MClk2Sel, 0);
|
|
/* Set SAI1 MCLK3 clock source. */
|
|
IOMUXC_SetSaiMClkClockSource(IOMUXC_GPR, kIOMUXC_GPR_SAI1MClk3Sel, 0);
|
|
/* Set SAI2 MCLK3 clock source. */
|
|
IOMUXC_SetSaiMClkClockSource(IOMUXC_GPR, kIOMUXC_GPR_SAI2MClk3Sel, 0);
|
|
/* Set SAI3 MCLK3 clock source. */
|
|
IOMUXC_SetSaiMClkClockSource(IOMUXC_GPR, kIOMUXC_GPR_SAI3MClk3Sel, 0);
|
|
/* Set MQS configuration. */
|
|
IOMUXC_MQSConfig(IOMUXC_GPR, kIOMUXC_MqsPwmOverSampleRate32, 0);
|
|
/* Set GPT1 High frequency reference clock source. */
|
|
IOMUXC_GPR->GPR5 &= ~IOMUXC_GPR_GPR5_VREF_1M_CLK_GPT1_MASK;
|
|
/* Set GPT2 High frequency reference clock source. */
|
|
IOMUXC_GPR->GPR5 &= ~IOMUXC_GPR_GPR5_VREF_1M_CLK_GPT2_MASK;
|
|
/* Set SystemCoreClock variable. */
|
|
SystemCoreClock = BOARD_BOOTCLOCKRUN_CORE_CLOCK;
|
|
}
|