e1a7aa23fd
Signed-off-by: Damien George <damien@micropython.org> |
||
|---|---|---|
| .. | ||
| test-frzmpy | ||
| Makefile | ||
| Makefile.test | ||
| README.md | ||
| imx6.ld | ||
| main.c | ||
| modmachine.c | ||
| mpconfigport.h | ||
| mphalport.h | ||
| mps2.ld | ||
| nrf51.ld | ||
| qstrdefsport.h | ||
| startup.c | ||
| stm32.ld | ||
| test_main.c | ||
| tests_profile.txt | ||
| uart.c | ||
| uart.h | ||
README.md
This is experimental, community-supported port for Cortex-M emulation as provided by QEMU (http://qemu.org).
The purposes of this port are to enable:
- Continuous integration
- run tests against architecture-specific parts of code base
- Experimentation
- simulation & prototyping of anything that has architecture-specific code
- exploring instruction set in terms of optimising some part of MicroPython or a module
- Streamlined debugging
- no need for JTAG or even an MCU chip itself
- no need to use OpenOCD or anything else that might slow down the process in terms of plugging things together, pressing buttons, etc.
This port will only work with the [GNU ARM Embedded Toolchain](
https://developer.arm.com/downloads/-/arm-gnu-toolchain-downloads
and not with CodeSourcery toolchain. You will need to modify
LDFLAGS if you want to use CodeSourcery's version of arm-none-eabi.
The difference is that CodeSourcery needs -T generic-m-hosted.ld while
ARM's version requires --specs=nano.specs --specs=rdimon.specs to be
passed to the linker.
To build and run image with builtin testsuite:
make -f Makefile.test test