micropython/ports/stm32
Damien George 980b33177b stm32/usbdev: Put all CDC state in a struct. 2017-09-21 21:48:28 +10:00
..
boards stm32/boards: Add new board B_L475E_IOT01A based on STM32L475. 2017-09-10 16:02:39 +10:00
modules all: Update Makefiles and others to build with new ports/ dir layout. 2017-09-06 14:09:13 +10:00
usbdev stm32/usbdev: Put all CDC state in a struct. 2017-09-21 21:48:28 +10:00
usbhost ports: Make new ports/ sub-directory and move all ports there. 2017-09-06 13:40:51 +10:00
.gitignore ports: Make new ports/ sub-directory and move all ports there. 2017-09-06 13:40:51 +10:00
Makefile all: Update Makefiles and others to build with new ports/ dir layout. 2017-09-06 14:09:13 +10:00
README.md all: Update Makefiles and others to build with new ports/ dir layout. 2017-09-06 14:09:13 +10:00
accel.c ports: Make new ports/ sub-directory and move all ports there. 2017-09-06 13:40:51 +10:00
accel.h ports: Make new ports/ sub-directory and move all ports there. 2017-09-06 13:40:51 +10:00
adc.c stm32/boards: Add new board B_L475E_IOT01A based on STM32L475. 2017-09-10 16:02:39 +10:00
adc.h ports: Make new ports/ sub-directory and move all ports there. 2017-09-06 13:40:51 +10:00
autoflash ports: Make new ports/ sub-directory and move all ports there. 2017-09-06 13:40:51 +10:00
bufhelper.c ports: Make new ports/ sub-directory and move all ports there. 2017-09-06 13:40:51 +10:00
bufhelper.h ports: Make new ports/ sub-directory and move all ports there. 2017-09-06 13:40:51 +10:00
can.c ports: Make new ports/ sub-directory and move all ports there. 2017-09-06 13:40:51 +10:00
can.h ports: Make new ports/ sub-directory and move all ports there. 2017-09-06 13:40:51 +10:00
dac.c ports: Make new ports/ sub-directory and move all ports there. 2017-09-06 13:40:51 +10:00
dac.h ports: Make new ports/ sub-directory and move all ports there. 2017-09-06 13:40:51 +10:00
dma.c ports: Make new ports/ sub-directory and move all ports there. 2017-09-06 13:40:51 +10:00
dma.h ports: Make new ports/ sub-directory and move all ports there. 2017-09-06 13:40:51 +10:00
extint.c stm32: Replace stray tabs with spaces. 2017-09-06 14:53:17 +10:00
extint.h ports: Make new ports/ sub-directory and move all ports there. 2017-09-06 13:40:51 +10:00
fatfs_port.c ports: Make new ports/ sub-directory and move all ports there. 2017-09-06 13:40:51 +10:00
flash.c ports: Make new ports/ sub-directory and move all ports there. 2017-09-06 13:40:51 +10:00
flash.h ports: Make new ports/ sub-directory and move all ports there. 2017-09-06 13:40:51 +10:00
font_petme128_8x8.h ports: Make new ports/ sub-directory and move all ports there. 2017-09-06 13:40:51 +10:00
gccollect.c ports: Make new ports/ sub-directory and move all ports there. 2017-09-06 13:40:51 +10:00
gccollect.h ports: Make new ports/ sub-directory and move all ports there. 2017-09-06 13:40:51 +10:00
gchelper.s ports: Make new ports/ sub-directory and move all ports there. 2017-09-06 13:40:51 +10:00
help.c py/builtinhelp: Change signature of help text var from pointer to array. 2017-09-12 16:03:52 +10:00
i2c.c stm32/i2c: When scanning for I2C devices only do 1 probe per address. 2017-09-08 11:19:40 +10:00
i2c.h ports: Make new ports/ sub-directory and move all ports there. 2017-09-06 13:40:51 +10:00
irq.c ports: Make new ports/ sub-directory and move all ports there. 2017-09-06 13:40:51 +10:00
irq.h ports: Make new ports/ sub-directory and move all ports there. 2017-09-06 13:40:51 +10:00
lcd.c ports: Make new ports/ sub-directory and move all ports there. 2017-09-06 13:40:51 +10:00
lcd.h ports: Make new ports/ sub-directory and move all ports there. 2017-09-06 13:40:51 +10:00
led.c ports: Make new ports/ sub-directory and move all ports there. 2017-09-06 13:40:51 +10:00
led.h ports: Make new ports/ sub-directory and move all ports there. 2017-09-06 13:40:51 +10:00
machine_i2c.c ports: Make new ports/ sub-directory and move all ports there. 2017-09-06 13:40:51 +10:00
main.c ports: Make new ports/ sub-directory and move all ports there. 2017-09-06 13:40:51 +10:00
make-stmconst.py stm32/make-stmconst.py: Make sure mpz const data lives in ROM. 2017-09-12 15:31:43 +10:00
modmachine.c ports: Make new ports/ sub-directory and move all ports there. 2017-09-06 13:40:51 +10:00
modmachine.h ports: Make new ports/ sub-directory and move all ports there. 2017-09-06 13:40:51 +10:00
modnetwork.c ports: Make new ports/ sub-directory and move all ports there. 2017-09-06 13:40:51 +10:00
modnetwork.h ports: Make new ports/ sub-directory and move all ports there. 2017-09-06 13:40:51 +10:00
modnwcc3k.c ports: Make new ports/ sub-directory and move all ports there. 2017-09-06 13:40:51 +10:00
modnwwiznet5k.c stm32/modnwwiznet5k: Release the GIL on blocking network operations. 2017-09-08 12:23:33 +10:00
modpyb.c ports: Make new ports/ sub-directory and move all ports there. 2017-09-06 13:40:51 +10:00
modstm.c ports: Make new ports/ sub-directory and move all ports there. 2017-09-06 13:40:51 +10:00
moduos.c ports: Make new ports/ sub-directory and move all ports there. 2017-09-06 13:40:51 +10:00
modusocket.c ports: Make new ports/ sub-directory and move all ports there. 2017-09-06 13:40:51 +10:00
modutime.c ports: Make new ports/ sub-directory and move all ports there. 2017-09-06 13:40:51 +10:00
mpconfigport.h stm32/mpconfigport.h: Add configuration for max periphs on L4 series. 2017-09-13 17:03:57 +10:00
mpconfigport.mk ports: Make new ports/ sub-directory and move all ports there. 2017-09-06 13:40:51 +10:00
mphalport.c ports: Make new ports/ sub-directory and move all ports there. 2017-09-06 13:40:51 +10:00
mphalport.h all: Update Makefiles and others to build with new ports/ dir layout. 2017-09-06 14:09:13 +10:00
mpthreadport.c ports: Make new ports/ sub-directory and move all ports there. 2017-09-06 13:40:51 +10:00
mpthreadport.h ports: Make new ports/ sub-directory and move all ports there. 2017-09-06 13:40:51 +10:00
pendsv.c ports: Make new ports/ sub-directory and move all ports there. 2017-09-06 13:40:51 +10:00
pendsv.h ports: Make new ports/ sub-directory and move all ports there. 2017-09-06 13:40:51 +10:00
pin.c ports: Make new ports/ sub-directory and move all ports there. 2017-09-06 13:40:51 +10:00
pin.h ports: Make new ports/ sub-directory and move all ports there. 2017-09-06 13:40:51 +10:00
pin_defs_stm32.c all: Update Makefiles and others to build with new ports/ dir layout. 2017-09-06 14:09:13 +10:00
pin_defs_stm32.h all: Update Makefiles and others to build with new ports/ dir layout. 2017-09-06 14:09:13 +10:00
pin_named_pins.c ports: Make new ports/ sub-directory and move all ports there. 2017-09-06 13:40:51 +10:00
portmodules.h ports: Make new ports/ sub-directory and move all ports there. 2017-09-06 13:40:51 +10:00
pybcdc.inf_template ports: Make new ports/ sub-directory and move all ports there. 2017-09-06 13:40:51 +10:00
pybthread.c ports: Make new ports/ sub-directory and move all ports there. 2017-09-06 13:40:51 +10:00
pybthread.h ports: Make new ports/ sub-directory and move all ports there. 2017-09-06 13:40:51 +10:00
qstrdefsport.h ports: Make new ports/ sub-directory and move all ports there. 2017-09-06 13:40:51 +10:00
rng.c ports: Make new ports/ sub-directory and move all ports there. 2017-09-06 13:40:51 +10:00
rng.h ports: Make new ports/ sub-directory and move all ports there. 2017-09-06 13:40:51 +10:00
rtc.c ports: Make new ports/ sub-directory and move all ports there. 2017-09-06 13:40:51 +10:00
rtc.h ports: Make new ports/ sub-directory and move all ports there. 2017-09-06 13:40:51 +10:00
sdcard.c ports: Make new ports/ sub-directory and move all ports there. 2017-09-06 13:40:51 +10:00
sdcard.h ports: Make new ports/ sub-directory and move all ports there. 2017-09-06 13:40:51 +10:00
servo.c ports: Make new ports/ sub-directory and move all ports there. 2017-09-06 13:40:51 +10:00
servo.h ports: Make new ports/ sub-directory and move all ports there. 2017-09-06 13:40:51 +10:00
spi.c ports: Make new ports/ sub-directory and move all ports there. 2017-09-06 13:40:51 +10:00
spi.h ports: Make new ports/ sub-directory and move all ports there. 2017-09-06 13:40:51 +10:00
startup_stm32.S ports: Make new ports/ sub-directory and move all ports there. 2017-09-06 13:40:51 +10:00
stm32_it.c ports: Make new ports/ sub-directory and move all ports there. 2017-09-06 13:40:51 +10:00
stm32_it.h ports: Make new ports/ sub-directory and move all ports there. 2017-09-06 13:40:51 +10:00
storage.c stm32/boards: Add new board B_L475E_IOT01A based on STM32L475. 2017-09-10 16:02:39 +10:00
storage.h ports: Make new ports/ sub-directory and move all ports there. 2017-09-06 13:40:51 +10:00
system_stm32.c ports: Make new ports/ sub-directory and move all ports there. 2017-09-06 13:40:51 +10:00
systick.c ports: Make new ports/ sub-directory and move all ports there. 2017-09-06 13:40:51 +10:00
systick.h ports: Make new ports/ sub-directory and move all ports there. 2017-09-06 13:40:51 +10:00
timer.c stm32/timer: Make pyb.Timer() instances persistent. 2017-09-13 16:20:42 +10:00
timer.h ports: Make new ports/ sub-directory and move all ports there. 2017-09-06 13:40:51 +10:00
uart.c ports: Make new ports/ sub-directory and move all ports there. 2017-09-06 13:40:51 +10:00
uart.h ports: Make new ports/ sub-directory and move all ports there. 2017-09-06 13:40:51 +10:00
usb.c stm32/usbdev: Put all CDC state in a struct. 2017-09-21 21:48:28 +10:00
usb.h stm32: Replace stray tabs with spaces. 2017-09-06 14:53:17 +10:00
usbd_cdc_interface.c stm32/usbdev: Put all CDC state in a struct. 2017-09-21 21:48:28 +10:00
usbd_cdc_interface.h stm32/usbdev: Put all CDC state in a struct. 2017-09-21 21:48:28 +10:00
usbd_conf.c ports: Make new ports/ sub-directory and move all ports there. 2017-09-06 13:40:51 +10:00
usbd_conf.h ports: Make new ports/ sub-directory and move all ports there. 2017-09-06 13:40:51 +10:00
usbd_desc.c ports: Make new ports/ sub-directory and move all ports there. 2017-09-06 13:40:51 +10:00
usbd_desc.h ports: Make new ports/ sub-directory and move all ports there. 2017-09-06 13:40:51 +10:00
usbd_hid_interface.c ports: Make new ports/ sub-directory and move all ports there. 2017-09-06 13:40:51 +10:00
usbd_hid_interface.h ports: Make new ports/ sub-directory and move all ports there. 2017-09-06 13:40:51 +10:00
usbd_msc_storage.c ports: Make new ports/ sub-directory and move all ports there. 2017-09-06 13:40:51 +10:00
usbd_msc_storage.h ports: Make new ports/ sub-directory and move all ports there. 2017-09-06 13:40:51 +10:00
usrsw.c ports: Make new ports/ sub-directory and move all ports there. 2017-09-06 13:40:51 +10:00
usrsw.h ports: Make new ports/ sub-directory and move all ports there. 2017-09-06 13:40:51 +10:00
wdt.c ports: Make new ports/ sub-directory and move all ports there. 2017-09-06 13:40:51 +10:00
wdt.h ports: Make new ports/ sub-directory and move all ports there. 2017-09-06 13:40:51 +10:00

README.md

MicroPython port to STM32 MCUs

This directory contains the port of MicroPython to ST's line of STM32Fxxx microcontrollers. It is based on the STM32Cube HAL library and currently supports: STM32F401, STM32F405, STM32F411, STM32F429, STM32F746.

The officially supported boards are the line of pyboards: PYBv1.0 and PYBv1.1 (both with STM32F405), and PYBLITEv1.0 (with STM32F411). See micropython.org/pyboard for further details.

Other boards that are supported include ST Discovery and Nucleo boards. See the boards/ subdirectory, which contains the configuration files used to build each individual board.

Build instructions

Before building the firmware for a given board the MicroPython cross-compiler must be built; it will be used to pre-compile some of the built-in scripts to bytecode. The cross-compiler is built and run on the host machine, using:

$ make -C mpy-cross

This command should be executed from the root directory of this repository. All other commands below should be executed from the ports/stm32/ directory.

An ARM compiler is required for the build, along with the associated binary utilities. The default compiler is arm-none-eabi-gcc, which is available for Arch Linux via the package arm-none-eabi-gcc, for Ubuntu via instructions here, or see here for the main GCC ARM Embedded page. The compiler can be changed using the CROSS_COMPILE variable when invoking make.

To build for a given board, run:

$ make BOARD=PYBV11

The default board is PYBV10 but any of the names of the subdirectories in the boards/ directory can be passed as the argument to BOARD=. The above command should produce binary images in the build-PYBV11/ subdirectory (or the equivalent directory for the board specified).

You must then get your board/microcontroller into DFU mode. On the pyboard connect the 3V3 pin to the P1/DFU pin with a wire (they are next to each other on the bottom left of the board, second row from the bottom) and then reset (by pressing the RST button) or power on the board. Then flash the firmware using the command:

$ make BOARD=PYBV11 deploy

This will use the included tools/pydfu.py script. You can use instead the dfu-util program (available here) by passing USE_PYDFU=0:

$ make BOARD=PYBV11 USE_PYDFU=0 deploy

If flashing the firmware does not work it may be because you don't have the correct permissions. Try then:

$ sudo make BOARD=PYBV11 deploy

Or using dfu-util directly:

$ sudo dfu-util -a 0 -d 0483:df11 -D build-PYBV11/firmware.dfu

ST Discovery or Nucleo boards have a builtin programmer called ST-LINK. With these boards and using Linux or OS X, you have the option to upload the stm32 firmware using the st-flash utility from the stlink project. To do so, connect the board with a mini USB cable to its ST-LINK USB port and then use the make target deploy-stlink. For example, if you have the STM32F4DISCOVERY board, you can run:

$ make BOARD=STM32F4DISC deploy-stlink

The st-flash program should detect the USB connection to the board automatically. If not, run lsusb to determine its USB bus and device number and set the STLINK_DEVICE environment variable accordingly, using the format <USB_BUS>:<USB_ADDR>. Example:

$ lsusb
[...]
Bus 002 Device 035: ID 0483:3748 STMicroelectronics ST-LINK/V2
$ export STLINK_DEVICE="002:0035"
$ make BOARD=STM32F4DISC deploy-stlink

Flashing the Firmware with OpenOCD

Another option to deploy the firmware on ST Discovery or Nucleo boards with a ST-LINK interface uses OpenOCD. Connect the board with a mini USB cable to its ST-LINK USB port and then use the make target deploy-openocd. For example, if you have the STM32F4DISCOVERY board:

$ make BOARD=STM32F4DISC deploy-openocd

The openocd program, which writes the firmware to the target board's flash, is configured via the file ports/stm32/boards/openocd_stm32f4.cfg. This configuration should work for all boards based on a STM32F4xx MCU with a ST-LINKv2 interface. You can override the path to this configuration by setting OPENOCD_CONFIG in your Makefile or on the command line.

Accessing the board

Once built and deployed, access the MicroPython REPL (the Python prompt) via USB serial or UART, depending on the board. For the pyboard you can try:

$ picocom /dev/ttyACM0