micropython/esp8266
Paul Sokolovsky 9f8b788fe5 esp8266: Switch floating-point arith routines to BootROM. 2016-06-12 18:44:14 +03:00
..
scripts esp8266/scripts/ntptime: Allow to override NTP server. 2016-05-30 19:16:05 +03:00
Makefile esp8266/Makefile: Document "disable" value for UART_OS. 2016-05-27 00:44:05 +03:00
README.md esp8266/README: Add a very first start section. 2016-05-19 21:10:35 +03:00
axtls_helpers.c esp8266/axtls_helpers: Helper/wrapper functions for axTLS. 2016-04-27 14:54:36 +03:00
eagle.rom.addr.v6.ld esp8266: Switch floating-point arith routines to BootROM. 2016-06-12 18:44:14 +03:00
esp8266.ld esp8266/esp8266.ld: Put axTLS to FlashROM. 2016-04-27 00:45:09 +03:00
esp_mphal.c extmod/machine_i2c: Redo mp_hal_pin macros to use open_drain and od_low. 2016-05-26 17:06:40 +01:00
esp_mphal.h esp8266: Enable DHT C-level driver. 2016-05-26 17:11:43 +01:00
espapa102.c esp8266: Add APA102 serial individually controllable LEDs support. 2016-05-19 22:29:11 +03:00
espapa102.h esp8266: Add APA102 serial individually controllable LEDs support. 2016-05-19 22:29:11 +03:00
espneopixel.c esp8266: Add esp.neopixel_write function to bit-bang WS2812 data. 2016-03-26 10:55:21 +02:00
espneopixel.h esp8266: Add esp.neopixel_write function to bit-bang WS2812 data. 2016-03-26 10:55:21 +02:00
esponewire.c esp8266: Separate 1-wire timing funcs from Python module to save iRAM. 2016-04-14 12:44:26 +01:00
esponewire.h esp8266: Separate 1-wire timing funcs from Python module to save iRAM. 2016-04-14 12:44:26 +01:00
esppwm.c esp8266/esppwm.c: Fix IRQ handler prototype. 2016-03-26 00:34:28 +02:00
esppwm.h esp8266: Add PWM support. 2016-03-26 00:32:37 +02:00
ets_alt_task.c esp8266: Provide a dedicated variable to disable ets_loop_iter. 2016-06-01 17:26:49 +01:00
ets_alt_task.h esp8266: Provide a dedicated variable to disable ets_loop_iter. 2016-06-01 17:26:49 +01:00
etshal.h esp8266/modesp: Add malloc() and free() functions. 2016-05-03 00:35:11 +03:00
fatfs_port.c esp8266: Enable FatFs support. 2016-03-27 17:13:47 +03:00
gccollect.c esp8266: Don't gc-collect BSS. 2016-03-08 10:16:06 +07:00
gccollect.h esp8266: Fix garbage collector by hard-coding stack end address. 2015-05-06 14:01:07 +01:00
gchelper.s esp8266: New port of Micro Python to ESP8266 wifi module. 2014-11-27 20:30:33 +00:00
help.c esp8266/help: Add "sta_if.active(True)" command. 2016-05-10 23:21:32 +03:00
intr.c esp8266: Add hard IRQ callbacks for pin change on GPIO0-15. 2016-04-14 12:44:26 +01:00
lexerstr32.c esp8266: Store frozen modules in FlashROM. 2016-03-17 23:06:47 +08:00
main.c esp8266/main: Update _boot module loading for recent frozen modules refactors. 2016-05-22 04:09:15 +03:00
makeimg.py esp8266: Minimize gap between Inst/DataRAM segments and FlashROM segment. 2016-04-03 15:45:14 +03:00
modesp.c esp8266: Let RTC work correctly after deepsleep. 2016-06-06 10:51:12 +01:00
modmachine.c esp8266: Let RTC work correctly after deepsleep. 2016-06-06 10:51:12 +01:00
modnetwork.c esp8266/modnetwork: Use struct bss_info::ssid_len for ESSID length. 2016-06-04 22:02:01 +03:00
modonewire.c esp8266: Separate 1-wire timing funcs from Python module to save iRAM. 2016-04-14 12:44:26 +01:00
modpyb.c esp8266: Move pyb.info() function to esp module and remove pyb module. 2016-04-28 12:23:55 +01:00
modpyb.h esp8266: Move pyb.info() function to esp module and remove pyb module. 2016-04-28 12:23:55 +01:00
modpybadc.c py: Change first arg of type.make_new from mp_obj_t to mp_obj_type_t*. 2016-01-11 00:49:27 +00:00
modpybpin.c esp8266: Add mp_hal_pin_input() and mp_hal_pin_output() functions. 2016-05-26 15:42:27 +01:00
modpybpwm.c esp8266: Remove pin_id field from C pin object. 2016-04-14 12:43:25 +01:00
modpybrtc.c esp8266: Let RTC work correctly after deepsleep. 2016-06-06 10:51:12 +01:00
modpybrtc.h esp8266: Let RTC work correctly after deepsleep. 2016-06-06 10:51:12 +01:00
modpybspi.c esp8266/modpybspi: Configure pins when initialising an SPI object. 2016-05-26 15:42:44 +01:00
modpybuart.c esp8266: Convert to use new MP_Exxx errno symbols. 2016-05-10 23:30:39 +01:00
moduos.c esp8266/moduos.c: Add stat() to the module uos of esp8266. 2016-05-31 23:00:38 +03:00
modutime.c esp8266/modutime: Support float argument to time.sleep(). 2016-03-04 16:52:30 +02:00
mpconfigport.h esp8266: Enable MICROPY_PY_IO_FILEIO to get compliant text/binary streams. 2016-05-31 21:46:02 +03:00
qstrdefsport.h esp8266/main: Set sys.path to ["", "/", "/lib"]. 2016-05-03 18:25:27 +03:00
strtoll.c esp8266: Change bignum from mpz to longlong; move some rodata to iram. 2014-11-28 14:58:25 +00:00
uart.c esp8266/uart: Properly initialise UART0 RXD pin in uart_config. 2016-05-29 10:30:27 +01:00
uart.h esp8266: Add uart_rx_wait and uart_rx_char functions. 2016-04-21 15:19:00 +01:00
uart_register.h esp8266: New port of Micro Python to ESP8266 wifi module. 2014-11-27 20:30:33 +00:00
user_config.h esp8266: New port of Micro Python to ESP8266 wifi module. 2014-11-27 20:30:33 +00:00
xtirq.h esp8266/xtirq: Add xtirq.h for controlling xtensa irqs. 2016-05-26 15:47:47 +01:00

README.md

MicroPython port to ESP8266

This is a highly experimental port of MicroPython for the WiFi modules based on Espressif ESP8266 chip.

WARNING: The port is highly experimental and any APIs are subject to change.

Currently implemented features include:

  • REPL (Python prompt) over UART0.
  • Garbage collector, exceptions.
  • Unicode support.
  • Builtin modules: gc, array, collections, io, struct, sys, esp, network, many more.
  • Arbitrary-precision long integers and 30-bit precision floats.
  • WiFi support.
  • Sockets using modlwip.
  • GPIO and bit-banging I2C, SPI support.
  • 1-Wire and WS2812 (aka Neopixel) protocols support.
  • Internal filesystem using the flash.
  • WebREPL over WiFi from a browser (clients at https://github.com/micropython/webrepl).

Work-in-progress documentation is available at http://docs.micropython.org/en/latest/esp8266/ .

Build instructions

The tool chain required for the build is the OpenSource ESP SDK, which can be found at https://github.com/pfalcon/esp-open-sdk. Clone this repository and run make in its directory to build and install the SDK locally. Make sure to add toolchain bin directory to your PATH. Read esp-open-sdk's README for additional important information on toolchain setup.

Add the external dependencies to the MicroPython repository checkout:

$ git submodule update --init

See the README in the repository root for more information about external dependencies.

Then, to build MicroPython for the ESP8266, just run:

$ cd esp8266
$ make axtls
$ make

This will produce binary images in the build/ subdirectory. If you install MicroPython to your module for the first time, or after installing any other firmware, you should erase flash completely:

esptool.py --port /dev/ttyXXX erase_flash

Erase flash also as a troubleshooting measure, if a module doesn't behave as expected.

To flash MicroPython image to your ESP8266, use:

$ make deploy

This will use the esptool.py script to download the images. You must have your ESP module in the bootloader mode, and connected to a serial port on your PC. The default serial port is /dev/ttyACM0. To specify another, use, eg:

$ make PORT=/dev/ttyUSB0 deploy

The image produced is firmware-combined.bin, to be flashed at 0x00000.

First start

Serial prompt

You can access the REPL (Python prompt) over UART (the same as used for programming).

  • Baudrate: 115200

WiFi

Initally, the device configures itself as a WiFi access point (AP).

  • ESSID: MicroPython-xxxxxx (xs are replaced with part of the MAC address).
  • Password: micropythoN (note the upper-case N).
  • IP address of the board: 192.168.4.1.
  • DHCP-server is activated.

WebREPL

Python prompt over WiFi, connecting through a browser.

Please follow the instructions there.

More detailed instructions can be found at http://docs.micropython.org/en/latest/esp8266/esp8266/tutorial/intro.html

Troubleshooting

While the port is still in alpha, it's known to be generally stable. If you experience strange bootloops, crashes, lockups, here's a list to check against:

  • You didn't erase flash before programming MicroPython firmware.
  • Firmware can be occasionally flashed incorrectly. Just retry. Recent esptool.py versions have --verify option.
  • Power supply you use doesn't provide enough power for ESP8266 or isn't stable enough.
  • A module/flash may be defective (not unheard of for cheap modules).

Please consult dedicated ESP8266 forums/resources for hardware-related problems.