| .. |
|
ADAFRUIT_F405_EXPRESS
|
stm32/boards: Add images to board.json for Adafruit and VCC_GND boards.
|
2021-10-28 09:52:59 +11:00 |
|
B_L072Z_LRWAN1
|
ports: Add board.json for all boards.
|
2021-10-27 14:04:53 +11:00 |
|
B_L475E_IOT01A
|
ports: Add board.json for all boards.
|
2021-10-27 14:04:53 +11:00 |
|
CERB40
|
ports: Add board.json for all boards.
|
2021-10-27 14:04:53 +11:00 |
|
ESPRUINO_PICO
|
ports: Add board.json for all boards.
|
2021-10-27 14:04:53 +11:00 |
|
GARATRONIC_NADHAT_F405
|
stm32/boards/NADHAT_PYBF405: Rename board to GARATRONIC_NADHAT_F405.
|
2021-11-25 21:10:43 +11:00 |
|
GARATRONIC_PYBSTICK26_F411
|
stm32/boards: Add PYBSTICK26 F411 board definition.
|
2021-11-25 21:09:57 +11:00 |
|
HYDRABUS
|
ports: Add board.json for all boards.
|
2021-10-27 14:04:53 +11:00 |
|
LEGO_HUB_NO6
|
stm32/boards/LEGO_HUB_NO6: Set filesystem label as HUB_NO6.
|
2021-12-09 16:51:35 +11:00 |
|
LIMIFROG
|
ports: Add board.json for all boards.
|
2021-10-27 14:04:53 +11:00 |
|
MIKROE_CLICKER2_STM32
|
stm32/boards/MIKROE_CLICKER2_STM32: Add more detail to board.json.
|
2021-11-19 16:32:53 +11:00 |
|
MIKROE_QUAIL
|
stm32/boards: Add new board MikroElektronika Quail, and F427 support.
|
2021-11-19 16:33:13 +11:00 |
|
NETDUINO_PLUS_2
|
ports: Add board.json for all boards.
|
2021-10-27 14:04:53 +11:00 |
|
NUCLEO_F091RC
|
stm32/boards: Remove unused MICROPY_HW_ENABLE_TIMER config.
|
2021-12-10 23:19:00 +11:00 |
|
NUCLEO_F401RE
|
stm32/boards: Enable MICROPY_HW_ENABLE_SERVO on various boards.
|
2021-12-10 23:19:20 +11:00 |
|
NUCLEO_F411RE
|
stm32/boards: Enable MICROPY_HW_ENABLE_SERVO on various boards.
|
2021-12-10 23:19:20 +11:00 |
|
NUCLEO_F412ZG
|
stm32/boards: Enable MICROPY_HW_ENABLE_SERVO on various boards.
|
2021-12-10 23:19:20 +11:00 |
|
NUCLEO_F413ZH
|
stm32/boards: Enable MICROPY_HW_ENABLE_SERVO on various boards.
|
2021-12-10 23:19:20 +11:00 |
|
NUCLEO_F429ZI
|
stm32/boards: Enable MICROPY_HW_ENABLE_SERVO on various boards.
|
2021-12-10 23:19:20 +11:00 |
|
NUCLEO_F439ZI
|
stm32/boards: Enable MICROPY_HW_ENABLE_SERVO on various boards.
|
2021-12-10 23:19:20 +11:00 |
|
NUCLEO_F446RE
|
stm32/boards: Enable MICROPY_HW_ENABLE_SERVO on various boards.
|
2021-12-10 23:19:20 +11:00 |
|
NUCLEO_F722ZE
|
ports: Add board.json for all boards.
|
2021-10-27 14:04:53 +11:00 |
|
NUCLEO_F746ZG
|
ports: Add board.json for all boards.
|
2021-10-27 14:04:53 +11:00 |
|
NUCLEO_F767ZI
|
ports: Add board.json for all boards.
|
2021-10-27 14:04:53 +11:00 |
|
NUCLEO_H743ZI
|
ports: Add board.json for all boards.
|
2021-10-27 14:04:53 +11:00 |
|
NUCLEO_H743ZI2
|
ports: Add board.json for all boards.
|
2021-10-27 14:04:53 +11:00 |
|
NUCLEO_L073RZ
|
ports: Add board.json for all boards.
|
2021-10-27 14:04:53 +11:00 |
|
NUCLEO_L432KC
|
stm32/boards: Remove unused MICROPY_HW_ENABLE_TIMER config.
|
2021-12-10 23:19:00 +11:00 |
|
NUCLEO_L452RE
|
ports: Add board.json for all boards.
|
2021-10-27 14:04:53 +11:00 |
|
NUCLEO_L476RG
|
ports: Add board.json for all boards.
|
2021-10-27 14:04:53 +11:00 |
|
NUCLEO_WB55
|
stm32/boards/NUCLEO_WB55: Fix LED ordering.
|
2021-12-09 14:03:35 +11:00 |
|
OLIMEX_E407
|
ports: Add board.json for all boards.
|
2021-10-27 14:04:53 +11:00 |
|
OLIMEX_H407
|
stm32/boards/OLIMEX_H407: Fix typo in OLIMEX H407 board.json.
|
2021-12-20 12:32:46 +11:00 |
|
PYBD_SF2
|
stm32/sdcard: Add config option to force MM card capacity.
|
2021-12-14 10:48:01 +11:00 |
|
PYBD_SF3
|
ports: Add board.json for all boards.
|
2021-10-27 14:04:53 +11:00 |
|
PYBD_SF6
|
ports: Add board.json for all boards.
|
2021-10-27 14:04:53 +11:00 |
|
PYBLITEV10
|
ports: Add board.json for all boards.
|
2021-10-27 14:04:53 +11:00 |
|
PYBV3
|
all: Replace busses with buses.
|
2021-05-20 23:22:03 +10:00 |
|
PYBV4
|
all: Replace busses with buses.
|
2021-05-20 23:22:03 +10:00 |
|
PYBV10
|
stm32,esp32: In machine_i2s, make object reference arrays root pointers.
|
2021-11-13 12:22:42 +11:00 |
|
PYBV11
|
stm32,esp32: In machine_i2s, make object reference arrays root pointers.
|
2021-11-13 12:22:42 +11:00 |
|
SPARKFUN_MICROMOD_STM32
|
ports: Add board.json for all boards.
|
2021-10-27 14:04:53 +11:00 |
|
STM32F4DISC
|
stm32/boards: Enable MICROPY_HW_ENABLE_SERVO on various boards.
|
2021-12-10 23:19:20 +11:00 |
|
STM32F7DISC
|
ports: Add board.json for all boards.
|
2021-10-27 14:04:53 +11:00 |
|
STM32F411DISC
|
ports: Add board.json for all boards.
|
2021-10-27 14:04:53 +11:00 |
|
STM32F429DISC
|
stm32/boards: Enable MICROPY_HW_ENABLE_SERVO on various boards.
|
2021-12-10 23:19:20 +11:00 |
|
STM32F439
|
stm32/boards: Enable MICROPY_HW_ENABLE_SERVO on various boards.
|
2021-12-10 23:19:20 +11:00 |
|
STM32F769DISC
|
stm32/boards: Enable MICROPY_HW_ENABLE_SERVO on various boards.
|
2021-12-10 23:19:20 +11:00 |
|
STM32H7B3I_DK
|
ports: Add board.json for all boards.
|
2021-10-27 14:04:53 +11:00 |
|
STM32L476DISC
|
ports: Add board.json for all boards.
|
2021-10-27 14:04:53 +11:00 |
|
STM32L496GDISC
|
stm32/boards: Remove unused MICROPY_HW_ENABLE_TIMER config.
|
2021-12-10 23:19:00 +11:00 |
|
USBDONGLE_WB55
|
ports: Add board.json for all boards.
|
2021-10-27 14:04:53 +11:00 |
|
VCC_GND_F407VE
|
stm32/boards: Add images to board.json for Adafruit and VCC_GND boards.
|
2021-10-28 09:52:59 +11:00 |
|
VCC_GND_F407ZG
|
stm32/boards: Add images to board.json for Adafruit and VCC_GND boards.
|
2021-10-28 09:52:59 +11:00 |
|
VCC_GND_H743VI
|
stm32/boards: Add images to board.json for Adafruit and VCC_GND boards.
|
2021-10-28 09:52:59 +11:00 |
|
common_basic.ld
|
stm32/boards: Factor out common data/bss/heap/stack linker sections.
|
2020-10-29 23:31:59 +11:00 |
|
common_bl.ld
|
stm32/boards: Factor out common data/bss/heap/stack linker sections.
|
2020-10-29 23:31:59 +11:00 |
|
common_blifs.ld
|
stm32/boards: Factor out common data/bss/heap/stack linker sections.
|
2020-10-29 23:31:59 +11:00 |
|
common_bss_heap_stack.ld
|
stm32/boards: Factor out common data/bss/heap/stack linker sections.
|
2020-10-29 23:31:59 +11:00 |
|
common_extratext_data_in_flash.ld
|
stm32: Support C++ code and user C modules written in C++.
|
2020-10-29 23:35:36 +11:00 |
|
common_extratext_data_in_flash_app.ld
|
stm32: Support C++ code and user C modules written in C++.
|
2020-10-29 23:35:36 +11:00 |
|
common_extratext_data_in_flash_text.ld
|
stm32: Support C++ code and user C modules written in C++.
|
2020-10-29 23:35:36 +11:00 |
|
common_ifs.ld
|
stm32/boards: Factor out common data/bss/heap/stack linker sections.
|
2020-10-29 23:31:59 +11:00 |
|
deploy.md
|
ports: Add board.json for all boards.
|
2021-10-27 14:04:53 +11:00 |
|
make-pins.py
|
stm32/boards/make-pins.py: Generate empty ADC table if needed.
|
2021-12-20 09:41:46 +11:00 |
|
manifest.py
|
stm32: Enable and freeze uasyncio.
|
2020-03-26 01:25:45 +11:00 |
|
openocd_stm32f4.cfg
|
stm32/boards: Allow OpenOCD stm_flash procedure to accept single FW img.
|
2018-12-13 13:43:10 +11:00 |
|
openocd_stm32f7.cfg
|
stm32/boards: Allow OpenOCD stm_flash procedure to accept single FW img.
|
2018-12-13 13:43:10 +11:00 |
|
openocd_stm32l4.cfg
|
stm32/boards: Allow OpenOCD stm_flash procedure to accept single FW img.
|
2018-12-13 13:43:10 +11:00 |
|
pllvalues.py
|
stm32/boards/pllvalues.py: Support wider range of PLL values for F413.
|
2021-04-20 23:33:33 +10:00 |
|
stm32f0xx_hal_conf_base.h
|
stm32/uart: Add uart_set_baudrate function.
|
2021-02-14 18:30:49 +11:00 |
|
stm32f4xx_hal_conf_base.h
|
stm32: Include HAL MMC code in F4 builds.
|
2021-11-30 10:21:18 +11:00 |
|
stm32f4xx_prefix.c
|
stm32/pin: In pin AF object, remove union of periph ptr types.
|
2018-04-11 16:14:58 +10:00 |
|
stm32f7xx_hal_conf_base.h
|
stm32/uart: Add uart_set_baudrate function.
|
2021-02-14 18:30:49 +11:00 |
|
stm32f091_af.csv
|
stm32/boards: Add PF11-BOOT0 to stm32f091_af.csv.
|
2021-09-21 18:11:42 +10:00 |
|
stm32f091xc.ld
|
stm32: Enter bootloader via a system reset.
|
2019-06-25 14:15:49 +10:00 |
|
stm32f401_af.csv
|
stm32/boards: Split combined alt-func labels and fix some other errors.
|
2018-05-29 21:37:49 +10:00 |
|
stm32f401xd.ld
|
stm32: Enter bootloader via a system reset.
|
2019-06-25 14:15:49 +10:00 |
|
stm32f401xe.ld
|
stm32: Enter bootloader via a system reset.
|
2019-06-25 14:15:49 +10:00 |
|
stm32f405.ld
|
stm32: Enter bootloader via a system reset.
|
2019-06-25 14:15:49 +10:00 |
|
stm32f405_af.csv
|
stm32/boards/stm32f405_af.csv: Fix typo in ETH_RMII_REF_CLK on PA1.
|
2019-11-11 12:02:14 +11:00 |
|
stm32f411.ld
|
stm32: Enter bootloader via a system reset.
|
2019-06-25 14:15:49 +10:00 |
|
stm32f411_af.csv
|
stm32/boards: Split combined alt-func labels and fix some other errors.
|
2018-05-29 21:37:49 +10:00 |
|
stm32f412_af.csv
|
stm32: Add support for F412 MCUs.
|
2020-05-15 10:08:30 +10:00 |
|
stm32f412zx.ld
|
stm32: Add support for F412 MCUs.
|
2020-05-15 10:08:30 +10:00 |
|
stm32f413_af.csv
|
stm32: Add support for F413 MCUs.
|
2019-05-02 16:26:53 +10:00 |
|
stm32f413xg.ld
|
stm32/boards: Remove stray '+' characters at start of lines in ld files.
|
2021-12-10 23:15:25 +11:00 |
|
stm32f413xh.ld
|
stm32/boards: Remove stray '+' characters at start of lines in ld files.
|
2021-12-10 23:15:25 +11:00 |
|
stm32f427xi.ld
|
stm32/boards: Add new board MikroElektronika Quail, and F427 support.
|
2021-11-19 16:33:13 +11:00 |
|
stm32f429.ld
|
stm32: Enter bootloader via a system reset.
|
2019-06-25 14:15:49 +10:00 |
|
stm32f429_af.csv
|
stm32/boards/stm32f429_af.csv: Fix typos in UART defs Tx->TX and Rx->RX.
|
2019-01-31 01:02:42 +11:00 |
|
stm32f439.ld
|
stm32/boards: Convert F413,F439,H743,L4xx,WB55 to new flash FS config.
|
2021-11-29 13:20:35 +11:00 |
|
stm32f439_af.csv
|
stm32: Enable UART7/8 on F4 series that have these peripherals.
|
2018-05-16 11:55:07 +10:00 |
|
stm32f479_af.csv
|
stm32: Add support for F479 MCUs.
|
2021-11-30 10:21:18 +11:00 |
|
stm32f722.ld
|
stm32/boards/stm32f722.ld: Provide memory regions for internal FS.
|
2019-07-25 16:31:36 +10:00 |
|
stm32f722_af.csv
|
stm32/boards: Add .ld and af.csv files for STM32F722.
|
2018-06-22 15:39:10 +10:00 |
|
stm32f746.ld
|
stm32: Enter bootloader via a system reset.
|
2019-06-25 14:15:49 +10:00 |
|
stm32f746_af.csv
|
stm32/boards/stm32f746_af.csv: Add ADC alt functions to correct pins.
|
2020-01-30 16:31:11 +11:00 |
|
stm32f767.ld
|
stm32/boards/NUCLEO_F767ZI: Update pins, peripherals and total flash.
|
2019-12-19 11:43:19 +11:00 |
|
stm32f767_af.csv
|
stm32/boards/stm32f767_af.csv: Add ADC column to pin capability list.
|
2018-03-07 18:40:06 +11:00 |
|
stm32f769.ld
|
stm32: Enter bootloader via a system reset.
|
2019-06-25 14:15:49 +10:00 |
|
stm32h7b3.ld
|
stm32: Add support for H7A3(Q)/H7B3(Q), and STM32H73B3I_DK board defn.
|
2021-09-16 12:29:28 +10:00 |
|
stm32h7b3_af.csv
|
stm32: Add support for H7A3(Q)/H7B3(Q), and STM32H73B3I_DK board defn.
|
2021-09-16 12:29:28 +10:00 |
|
stm32h7xx_hal_conf_base.h
|
stm32/uart: Fix LPUART1 baudrate set/get.
|
2021-07-26 13:53:50 +10:00 |
|
stm32h743.ld
|
stm32/boards: Convert F413,F439,H743,L4xx,WB55 to new flash FS config.
|
2021-11-29 13:20:35 +11:00 |
|
stm32h743_af.csv
|
stm32/boards/stm32h743_af.csv: Add ADC entries to pin capability table.
|
2019-02-06 13:34:53 +11:00 |
|
stm32l0xx_hal_conf_base.h
|
stm32/uart: Fix LPUART1 baudrate set/get.
|
2021-07-26 13:53:50 +10:00 |
|
stm32l4xx_hal_conf_base.h
|
stm32: Update L4 code to build with latest stm32lib and L4 HAL 1.17.0.
|
2021-12-14 10:48:01 +11:00 |
|
stm32l072_af.csv
|
stm32/boards: Split UARTx_RTS_DE into UARTx_RTS/UARTx_DE in pin defs.
|
2021-04-13 23:58:20 +10:00 |
|
stm32l072xz.ld
|
stm32/boards: Add MCU support files for STM32L072.
|
2019-07-05 17:26:03 +10:00 |
|
stm32l432.ld
|
stm32/boards: Convert F413,F439,H743,L4xx,WB55 to new flash FS config.
|
2021-11-29 13:20:35 +11:00 |
|
stm32l432_af.csv
|
stm32/boards: Remove trailing spaces, and add newline at end of file.
|
2021-09-10 16:09:03 +10:00 |
|
stm32l452_af.csv
|
stm32/boards: Split UARTx_RTS_DE into UARTx_RTS/UARTx_DE in pin defs.
|
2021-04-13 23:58:20 +10:00 |
|
stm32l452xe.ld
|
stm32/boards: Convert F413,F439,H743,L4xx,WB55 to new flash FS config.
|
2021-11-29 13:20:35 +11:00 |
|
stm32l476_af.csv
|
stm32/boards: Split UARTx_RTS_DE into UARTx_RTS/UARTx_DE in pin defs.
|
2021-04-13 23:58:20 +10:00 |
|
stm32l476xe.ld
|
stm32/boards: Convert F413,F439,H743,L4xx,WB55 to new flash FS config.
|
2021-11-29 13:20:35 +11:00 |
|
stm32l476xg.ld
|
stm32/boards: Convert F413,F439,H743,L4xx,WB55 to new flash FS config.
|
2021-11-29 13:20:35 +11:00 |
|
stm32l496_af.csv
|
stm32/boards: Split combined alt-func labels and fix some other errors.
|
2018-05-29 21:37:49 +10:00 |
|
stm32l496xg.ld
|
stm32/boards: Convert F413,F439,H743,L4xx,WB55 to new flash FS config.
|
2021-11-29 13:20:35 +11:00 |
|
stm32wb55_af.csv
|
stm32/boards: Split UARTx_RTS_DE into UARTx_RTS/UARTx_DE in pin defs.
|
2021-04-13 23:58:20 +10:00 |
|
stm32wb55xg.ld
|
stm32/boards: Convert F413,F439,H743,L4xx,WB55 to new flash FS config.
|
2021-11-29 13:20:35 +11:00 |
|
stm32wbxx_hal_conf_base.h
|
stm32/uart: Fix LPUART1 baudrate set/get.
|
2021-07-26 13:53:50 +10:00 |
f2b5c99fde