micropython/ports/cc3200/hal/gpio.h

140 lines
6.1 KiB
C

//*****************************************************************************
//
// gpio.h
//
// Defines and Macros for GPIO API.
//
// Copyright (C) 2014 Texas Instruments Incorporated - http://www.ti.com/
//
//
// Redistribution and use in source and binary forms, with or without
// modification, are permitted provided that the following conditions
// are met:
//
// Redistributions of source code must retain the above copyright
// notice, this list of conditions and the following disclaimer.
//
// Redistributions in binary form must reproduce the above copyright
// notice, this list of conditions and the following disclaimer in the
// documentation and/or other materials provided with the
// distribution.
//
// Neither the name of Texas Instruments Incorporated nor the names of
// its contributors may be used to endorse or promote products derived
// from this software without specific prior written permission.
//
// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
// "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
// LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
// A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
// OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
// LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
// DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
// THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
// (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
// OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
//
//*****************************************************************************
#ifndef __GPIO_H__
#define __GPIO_H__
//*****************************************************************************
//
// If building with a C++ compiler, make all of the definitions in this header
// have a C binding.
//
//*****************************************************************************
#ifdef __cplusplus
extern "C"
{
#endif
//*****************************************************************************
//
// The following values define the bit field for the ucPins argument to several
// of the APIs.
//
//*****************************************************************************
#define GPIO_PIN_0 0x00000001 // GPIO pin 0
#define GPIO_PIN_1 0x00000002 // GPIO pin 1
#define GPIO_PIN_2 0x00000004 // GPIO pin 2
#define GPIO_PIN_3 0x00000008 // GPIO pin 3
#define GPIO_PIN_4 0x00000010 // GPIO pin 4
#define GPIO_PIN_5 0x00000020 // GPIO pin 5
#define GPIO_PIN_6 0x00000040 // GPIO pin 6
#define GPIO_PIN_7 0x00000080 // GPIO pin 7
//*****************************************************************************
//
// Values that can be passed to GPIODirModeSet as the ulPinIO parameter, and
// returned from GPIODirModeGet.
//
//*****************************************************************************
#define GPIO_DIR_MODE_IN 0x00000000 // Pin is a GPIO input
#define GPIO_DIR_MODE_OUT 0x00000001 // Pin is a GPIO output
//*****************************************************************************
//
// Values that can be passed to GPIOIntTypeSet as the ulIntType parameter, and
// returned from GPIOIntTypeGet.
//
//*****************************************************************************
#define GPIO_FALLING_EDGE 0x00000000 // Interrupt on falling edge
#define GPIO_RISING_EDGE 0x00000004 // Interrupt on rising edge
#define GPIO_BOTH_EDGES 0x00000001 // Interrupt on both edges
#define GPIO_LOW_LEVEL 0x00000002 // Interrupt on low level
#define GPIO_HIGH_LEVEL 0x00000006 // Interrupt on high level
//*****************************************************************************
//
// Values that can be passed to GPIOIntEnable() and GPIOIntDisable() functions
// in the ulIntFlags parameter.
//
//*****************************************************************************
#define GPIO_INT_DMA 0x00000100
#define GPIO_INT_PIN_0 0x00000001
#define GPIO_INT_PIN_1 0x00000002
#define GPIO_INT_PIN_2 0x00000004
#define GPIO_INT_PIN_3 0x00000008
#define GPIO_INT_PIN_4 0x00000010
#define GPIO_INT_PIN_5 0x00000020
#define GPIO_INT_PIN_6 0x00000040
#define GPIO_INT_PIN_7 0x00000080
//*****************************************************************************
//
// Prototypes for the APIs.
//
//*****************************************************************************
extern void GPIODirModeSet(unsigned long ulPort, unsigned char ucPins,
unsigned long ulPinIO);
extern unsigned long GPIODirModeGet(unsigned long ulPort, unsigned char ucPin);
extern void GPIOIntTypeSet(unsigned long ulPort, unsigned char ucPins,
unsigned long ulIntType);
extern void GPIODMATriggerEnable(unsigned long ulPort);
extern void GPIODMATriggerDisable(unsigned long ulPort);
extern unsigned long GPIOIntTypeGet(unsigned long ulPort, unsigned char ucPin);
extern void GPIOIntEnable(unsigned long ulPort, unsigned long ulIntFlags);
extern void GPIOIntDisable(unsigned long ulPort, unsigned long ulIntFlags);
extern long GPIOIntStatus(unsigned long ulPort, tBoolean bMasked);
extern void GPIOIntClear(unsigned long ulPort, unsigned long ulIntFlags);
extern void GPIOIntRegister(unsigned long ulPort,
void (*pfnIntHandler)(void));
extern void GPIOIntUnregister(unsigned long ulPort);
extern long GPIOPinRead(unsigned long ulPort, unsigned char ucPins);
extern void GPIOPinWrite(unsigned long ulPort, unsigned char ucPins,
unsigned char ucVal);
//*****************************************************************************
//
// Mark the end of the C bindings section for C++ compilers.
//
//*****************************************************************************
#ifdef __cplusplus
}
#endif
#endif // __GPIO_H__