86 lines
2.6 KiB
ReStructuredText
86 lines
2.6 KiB
ReStructuredText
.. currentmodule:: machine
|
|
|
|
class SPI -- a master-driven serial protocol
|
|
============================================
|
|
|
|
SPI is a serial protocol that is driven by a master. At the physical level
|
|
there are 3 lines: SCK, MOSI, MISO.
|
|
|
|
.. only:: port_wipy
|
|
|
|
See usage model of I2C; SPI is very similar. Main difference is
|
|
parameters to init the SPI bus::
|
|
|
|
from machine import SPI
|
|
spi = SPI(0, mode=SPI.MASTER, baudrate=1000000, polarity=0, phase=0, firstbit=SPI.MSB)
|
|
|
|
Only required parameter is mode, must be SPI.MASTER. Polarity can be 0 or
|
|
1, and is the level the idle clock line sits at. Phase can be 0 or 1 to
|
|
sample data on the first or second clock edge respectively.
|
|
|
|
Constructors
|
|
------------
|
|
|
|
.. only:: port_wipy
|
|
|
|
.. class:: SPI(id, ...)
|
|
|
|
Construct an SPI object on the given bus. ``id`` can be only 0.
|
|
With no additional parameters, the SPI object is created but not
|
|
initialised (it has the settings from the last initialisation of
|
|
the bus, if any). If extra arguments are given, the bus is initialised.
|
|
See ``init`` for parameters of initialisation.
|
|
|
|
Methods
|
|
-------
|
|
|
|
.. method:: SPI.init(mode, baudrate=1000000, \*, polarity=0, phase=0, bits=8, firstbit=SPI.MSB, pins=(CLK, MOSI, MISO))
|
|
|
|
Initialise the SPI bus with the given parameters:
|
|
|
|
- ``mode`` must be ``SPI.MASTER``.
|
|
- ``baudrate`` is the SCK clock rate.
|
|
- ``polarity`` can be 0 or 1, and is the level the idle clock line sits at.
|
|
- ``phase`` can be 0 or 1 to sample data on the first or second clock edge
|
|
respectively.
|
|
- ``bits`` is the width of each transfer, accepted values are 8, 16 and 32.
|
|
- ``firstbit`` can be ``SPI.MSB`` only.
|
|
- ``pins`` is an optional tupple with the pins to assign to the SPI bus.
|
|
|
|
.. method:: SPI.deinit()
|
|
|
|
Turn off the SPI bus.
|
|
|
|
.. method:: SPI.write(buf)
|
|
|
|
Write the data contained in ``buf``.
|
|
Returns the number of bytes written.
|
|
|
|
.. method:: SPI.read(nbytes, *, write=0x00)
|
|
|
|
Read the ``nbytes`` while writing the data specified by ``write``.
|
|
Return the number of bytes read.
|
|
|
|
.. method:: SPI.readinto(buf, *, write=0x00)
|
|
|
|
Read into the buffer specified by ``buf`` while writing the data specified by
|
|
``write``.
|
|
Return the number of bytes read.
|
|
|
|
.. method:: SPI.write_readinto(write_buf, read_buf)
|
|
|
|
Write from ``write_buf`` and read into ``read_buf``. Both buffers must have the
|
|
same length.
|
|
Returns the number of bytes written
|
|
|
|
Constants
|
|
---------
|
|
|
|
.. data:: SPI.MASTER
|
|
|
|
for initialising the SPI bus to master
|
|
|
|
.. data:: SPI.MSB
|
|
|
|
set the first bit to be the most significant bit
|