422 lines
13 KiB
ReStructuredText
422 lines
13 KiB
ReStructuredText
****************************************
|
|
:mod:`network` --- network configuration
|
|
****************************************
|
|
|
|
.. module:: network
|
|
:synopsis: network configuration
|
|
|
|
This module provides network drivers and routing configuration. Network
|
|
drivers for specific hardware are available within this module and are
|
|
used to configure a hardware network interface. Configured interfaces
|
|
are then available for use via the :mod:`socket` module.
|
|
|
|
For example::
|
|
|
|
# configure a specific network interface
|
|
# see below for examples of specific drivers
|
|
import network
|
|
nic = network.Driver(...)
|
|
print(nic.ifconfig())
|
|
|
|
# now use socket as usual
|
|
import socket
|
|
addr = socket.getaddrinfo('micropython.org', 80)[0][-1]
|
|
s = socket.socket()
|
|
s.connect(addr)
|
|
s.send(b'GET / HTTP/1.1\r\nHost: micropython.org\r\n\r\n')
|
|
data = s.recv(1000)
|
|
s.close()
|
|
|
|
.. only:: port_wipy
|
|
|
|
.. _network.server:
|
|
|
|
class server
|
|
============
|
|
|
|
Constructors
|
|
------------
|
|
|
|
.. class:: network.server(id, ...)
|
|
|
|
Create a server instance, see ``init`` for parameters of initialization.
|
|
|
|
Methods
|
|
-------
|
|
|
|
.. method:: server.init(\*, login=('micro', 'python'), timeout=300)
|
|
|
|
Init (and effectively start the server). Optionally a new ``user``, ``password``
|
|
and ``timeout`` (in seconds) can be passed.
|
|
|
|
.. method:: server.deinit()
|
|
|
|
Stop the server
|
|
|
|
.. method:: server.timeout([timeout_in_seconds])
|
|
|
|
Get or set the server timeout.
|
|
|
|
.. method:: server.isrunning()
|
|
|
|
Returns ``True`` is the server is running, ``False`` otherwise.
|
|
|
|
.. only:: port_pyboard
|
|
|
|
class CC3K
|
|
==========
|
|
|
|
This class provides a driver for CC3000 wifi modules. Example usage::
|
|
|
|
import network
|
|
nic = network.CC3K(pyb.SPI(2), pyb.Pin.board.Y5, pyb.Pin.board.Y4, pyb.Pin.board.Y3)
|
|
nic.connect('your-ssid', 'your-password')
|
|
while not nic.isconnected():
|
|
pyb.delay(50)
|
|
print(nic.ifconfig())
|
|
|
|
# now use socket as usual
|
|
...
|
|
|
|
For this example to work the CC3000 module must have the following connections:
|
|
|
|
- MOSI connected to Y8
|
|
- MISO connected to Y7
|
|
- CLK connected to Y6
|
|
- CS connected to Y5
|
|
- VBEN connected to Y4
|
|
- IRQ connected to Y3
|
|
|
|
It is possible to use other SPI busses and other pins for CS, VBEN and IRQ.
|
|
|
|
Constructors
|
|
------------
|
|
|
|
.. class:: CC3K(spi, pin_cs, pin_en, pin_irq)
|
|
|
|
Create a CC3K driver object, initialise the CC3000 module using the given SPI bus
|
|
and pins, and return the CC3K object.
|
|
|
|
Arguments are:
|
|
|
|
- ``spi`` is an :ref:`SPI object <pyb.SPI>` which is the SPI bus that the CC3000 is
|
|
connected to (the MOSI, MISO and CLK pins).
|
|
- ``pin_cs`` is a :ref:`Pin object <pyb.Pin>` which is connected to the CC3000 CS pin.
|
|
- ``pin_en`` is a :ref:`Pin object <pyb.Pin>` which is connected to the CC3000 VBEN pin.
|
|
- ``pin_irq`` is a :ref:`Pin object <pyb.Pin>` which is connected to the CC3000 IRQ pin.
|
|
|
|
All of these objects will be initialised by the driver, so there is no need to
|
|
initialise them yourself. For example, you can use::
|
|
|
|
nic = network.CC3K(pyb.SPI(2), pyb.Pin.board.Y5, pyb.Pin.board.Y4, pyb.Pin.board.Y3)
|
|
|
|
Methods
|
|
-------
|
|
|
|
.. method:: cc3k.connect(ssid, key=None, \*, security=WPA2, bssid=None)
|
|
|
|
Connect to a wifi access point using the given SSID, and other security
|
|
parameters.
|
|
|
|
.. method:: cc3k.disconnect()
|
|
|
|
Disconnect from the wifi access point.
|
|
|
|
.. method:: cc3k.isconnected()
|
|
|
|
Returns True if connected to a wifi access point and has a valid IP address,
|
|
False otherwise.
|
|
|
|
.. method:: cc3k.ifconfig()
|
|
|
|
Returns a 7-tuple with (ip, subnet mask, gateway, DNS server, DHCP server,
|
|
MAC address, SSID).
|
|
|
|
.. method:: cc3k.patch_version()
|
|
|
|
Return the version of the patch program (firmware) on the CC3000.
|
|
|
|
.. method:: cc3k.patch_program('pgm')
|
|
|
|
Upload the current firmware to the CC3000. You must pass 'pgm' as the first
|
|
argument in order for the upload to proceed.
|
|
|
|
Constants
|
|
---------
|
|
|
|
.. data:: CC3K.WEP
|
|
.. data:: CC3K.WPA
|
|
.. data:: CC3K.WPA2
|
|
|
|
security type to use
|
|
|
|
class WIZNET5K
|
|
==============
|
|
|
|
This class allows you to control WIZnet5x00 Ethernet adaptors based on
|
|
the W5200 and W5500 chipsets (only W5200 tested).
|
|
|
|
Example usage::
|
|
|
|
import network
|
|
nic = network.WIZNET5K(pyb.SPI(1), pyb.Pin.board.X5, pyb.Pin.board.X4)
|
|
print(nic.ifconfig())
|
|
|
|
# now use socket as usual
|
|
...
|
|
|
|
For this example to work the WIZnet5x00 module must have the following connections:
|
|
|
|
- MOSI connected to X8
|
|
- MISO connected to X7
|
|
- SCLK connected to X6
|
|
- nSS connected to X5
|
|
- nRESET connected to X4
|
|
|
|
It is possible to use other SPI busses and other pins for nSS and nRESET.
|
|
|
|
Constructors
|
|
------------
|
|
|
|
.. class:: WIZNET5K(spi, pin_cs, pin_rst)
|
|
|
|
Create a WIZNET5K driver object, initialise the WIZnet5x00 module using the given
|
|
SPI bus and pins, and return the WIZNET5K object.
|
|
|
|
Arguments are:
|
|
|
|
- ``spi`` is an :ref:`SPI object <pyb.SPI>` which is the SPI bus that the WIZnet5x00 is
|
|
connected to (the MOSI, MISO and SCLK pins).
|
|
- ``pin_cs`` is a :ref:`Pin object <pyb.Pin>` which is connected to the WIZnet5x00 nSS pin.
|
|
- ``pin_rst`` is a :ref:`Pin object <pyb.Pin>` which is connected to the WIZnet5x00 nRESET pin.
|
|
|
|
All of these objects will be initialised by the driver, so there is no need to
|
|
initialise them yourself. For example, you can use::
|
|
|
|
nic = network.WIZNET5K(pyb.SPI(1), pyb.Pin.board.X5, pyb.Pin.board.X4)
|
|
|
|
Methods
|
|
-------
|
|
|
|
.. method:: wiznet5k.ifconfig([(ip, subnet, gateway, dns)])
|
|
|
|
Get/set IP address, subnet mask, gateway and DNS.
|
|
|
|
When called with no arguments, this method returns a 4-tuple with the above information.
|
|
|
|
To set the above values, pass a 4-tuple with the required information. For example::
|
|
|
|
nic.ifconfig(('192.168.0.4', '255.255.255.0', '192.168.0.1', '8.8.8.8'))
|
|
|
|
.. method:: wiznet5k.regs()
|
|
|
|
Dump the WIZnet5x00 registers. Useful for debugging.
|
|
|
|
.. _network.WLAN:
|
|
|
|
.. only:: port_esp8266
|
|
|
|
class WLAN
|
|
==========
|
|
|
|
This class provides a driver for WiFi network processor in the ESP8266. Example usage::
|
|
|
|
import network
|
|
# setup as a station
|
|
nic = network.WLAN()
|
|
nic.connect('your-ssid', 'your-password')
|
|
# now use socket as usual
|
|
|
|
Constructors
|
|
------------
|
|
.. class:: WLAN()
|
|
|
|
Create a WLAN driver object.
|
|
|
|
Methods
|
|
-------
|
|
|
|
.. method:: wlan.connect(ssid, password)
|
|
|
|
Connect to the specified wireless network, using the specified password.
|
|
|
|
.. method:: wlan.disconnect()
|
|
|
|
Disconnect from the currently connected wireless network.
|
|
|
|
.. method:: wlan.scan(cb)
|
|
|
|
Initiate scanning for the available wireless networks.
|
|
|
|
Scanning is only possible if the radio is in station or station+AP mode; if
|
|
called while in AP only mode, an OSError exception will be raised.
|
|
|
|
Once the scanning is complete, the provided callback function ``cb`` will
|
|
be called once for each network found, and passed a tuple with information
|
|
about that network:
|
|
|
|
(ssid, bssid, channel, RSSI, authmode, hidden)
|
|
|
|
There are five values for authmode:
|
|
|
|
* 0 -- open
|
|
* 1 -- WEP
|
|
* 2 -- WPA-PSK
|
|
* 3 -- WPA2-PSK
|
|
* 4 -- WPA/WPA2-PSK
|
|
|
|
and two for hidden:
|
|
|
|
* 0 -- visible
|
|
* 1 -- hidden
|
|
|
|
.. method:: status()
|
|
|
|
Return the current status of the wireless connection.
|
|
|
|
The possible statuses are defined as constants:
|
|
|
|
* ``STAT_IDLE`` -- no connection and no activity,
|
|
* ``STAT_CONNECTING`` -- connecting in progress,
|
|
* ``STAT_WRONG_PASSWORD`` -- failed due to incorrect password,
|
|
* ``STAT_NO_AP_FOUND`` -- failed because no access point replied,
|
|
* ``STAT_CONNECT_FAIL`` -- failed due to other problems,
|
|
* ``STAT_GOT_IP`` -- connection susccessful.
|
|
|
|
.. method:: wlan.isconnected()
|
|
|
|
In case of STA mode, returns ``True`` if connected to a wifi access
|
|
point and has a valid IP address. In AP mode returns ``True`` when a
|
|
station is connected. Returns ``False`` otherwise.
|
|
|
|
|
|
.. only:: port_wipy
|
|
|
|
class WLAN
|
|
==========
|
|
|
|
This class provides a driver for WiFi network processor in the WiPy. Example usage::
|
|
|
|
import network
|
|
import time
|
|
# setup as a station
|
|
wlan = network.WLAN(mode=WLAN.STA)
|
|
wlan.connect('your-ssid', auth=(WLAN.WPA2, 'your-key'))
|
|
while not wlan.isconnected():
|
|
time.sleep_ms(50)
|
|
print(wlan.ifconfig())
|
|
|
|
# now use socket as usual
|
|
...
|
|
|
|
Constructors
|
|
------------
|
|
|
|
.. class:: WLAN(..)
|
|
|
|
Create a WLAN object, and optionally configure it. See ``init`` for params of configuration.
|
|
|
|
Methods
|
|
-------
|
|
|
|
.. method:: wlan.init(mode, \*, ssid, security, key, channel, antenna)
|
|
|
|
Set or get the WiFi network processor configuration.
|
|
|
|
Arguments are:
|
|
|
|
- ``mode`` can be either ``WLAN.STA`` or ``WLAN.AP``.
|
|
- ``ssid`` is a string with the ssid name. Only needed when mode is ``WLAN.AP``.
|
|
- ``auth`` is a tuple with (sec, key). Security can be ``None``, ``WLAN.WEP``,
|
|
``WLAN.WPA`` or ``WLAN.WPA2``. The key is a string with the network password.
|
|
If ``security`` is ``WLAN.WEP`` the key must be a string representing hexadecimal
|
|
values (e.g. 'ABC1DE45BF'). Only needed when mode is ``WLAN.AP``.
|
|
- ``channel`` a number in the range 1-11. Only needed when mode is ``WLAN.AP``.
|
|
- ``antenna`` selects between the internal and the external antenna. Can be either
|
|
``WLAN.INT_ANT`` or ``WLAN.EXTERNAL``.
|
|
|
|
For example, you can do::
|
|
|
|
# create and configure as an access point
|
|
nic.iwconfig(mode=WLAN.AP, ssid='wipy-wlan', security=WLAN.WPA2, key='www.wipy.io', channel=7, antenna=WLAN.INTERNAL)
|
|
|
|
or::
|
|
|
|
# configure as an station
|
|
nic.iwconfig(mode=WLAN.STA)
|
|
|
|
With no arguments given, the current configuration is returned as a namedtuple that looks like this:
|
|
``(mode=2, ssid='wipy-wlan', security=2, key='www.wipy.io', channel=5, antenna=0)``
|
|
|
|
.. method:: wlan.connect(ssid, \*, auth=None, key=None, bssid=None, timeout=5000)
|
|
|
|
Connect to a wifi access point using the given SSID, and other security
|
|
parameters.
|
|
|
|
- ``key`` is always a string, but if ``security`` is ``WLAN.WEP`` the key must be a string
|
|
representing hexadecimal values (e.g. 'ABC1DE45BF').
|
|
- ``bssid`` is the MAC address of the AP to connect to. Useful when there are several APs
|
|
with the same ssid.
|
|
- ``timeout`` is the maximum time in milliseconds to wait for the connection to succeed.
|
|
|
|
.. method:: wlan.scan()
|
|
|
|
Performs a network scan and returns a list of named tuples with (ssid, bssid, sec, channel, rssi).
|
|
Note that channel is always ``None`` since this info is not provided by the WiPy.
|
|
|
|
.. method:: wlan.disconnect()
|
|
|
|
Disconnect from the wifi access point.
|
|
|
|
.. method:: wlan.isconnected()
|
|
|
|
In case of STA mode, returns ``True`` if connected to a wifi access point and has a valid IP address.
|
|
In AP mode returns ``True`` when a station is connected. Returns ``False`` otherwise.
|
|
|
|
.. method:: wlan.ifconfig(if_id, config=['dhcp' or configtuple])
|
|
|
|
With no parameters given eturns a 4-tuple of ``(ip, subnet mask, gateway, DNS server)``.
|
|
|
|
if ``'dhcp'`` is passed as a parameter then the DHCP client is enabled and the IP params
|
|
are negotiated with the AP.
|
|
|
|
if the 4-tuple config is given then a static IP is configured. For example::
|
|
|
|
nic.ifconfig(config=('192.168.0.4', '255.255.255.0', '192.168.0.1', '8.8.8.8'))
|
|
|
|
.. method:: wlan.mac([mac_addr])
|
|
|
|
Get or set a 6-byte long bytes object with the MAC address.
|
|
|
|
.. method:: wlan.irq(\*, handler, wake)
|
|
|
|
Create a callback to be triggered when a WLAN event occurs during ``machine.SLEEP``
|
|
mode. Events are triggered by socket activity or by WLAN connection/disconnection.
|
|
|
|
- ``handler`` is the function that gets called when the irq is triggered.
|
|
- ``wake`` must be ``machine.SLEEP``.
|
|
|
|
Returns a callback object.
|
|
|
|
Constants
|
|
---------
|
|
|
|
.. data:: WLAN.STA
|
|
|
|
WiFi station mode
|
|
|
|
.. data:: WLAN.AP
|
|
|
|
WiFi access point mode
|
|
|
|
.. data:: WLAN.WEP
|
|
.. data:: WLAN.WPA
|
|
.. data:: WLAN.WPA2
|
|
|
|
selects the network security
|
|
|
|
.. data:: WLAN.INT_ANT
|
|
.. data:: WLAN.EXT_ANT
|
|
|
|
selects the antenna type
|