| .. |
|
B_L475E_IOT01A
|
stm32/Makefile: Allow a board to config either 1 or 2 firmware sections.
|
2018-03-27 21:24:15 +11:00 |
|
CERB40
|
stm32/boards: Update pins.csv to include USB pins where needed.
|
2018-05-01 17:38:51 +10:00 |
|
ESPRUINO_PICO
|
stm32/Makefile: Allow a board to config either 1 or 2 firmware sections.
|
2018-03-27 21:24:15 +11:00 |
|
HYDRABUS
|
stm32: Rename MICROPY_HW_HAS_SDCARD to MICROPY_HW_ENABLE_SDCARD.
|
2019-04-01 15:21:26 +11:00 |
|
LIMIFROG
|
stm32/Makefile: Allow a board to config either 1 or 2 firmware sections.
|
2018-03-27 21:24:15 +11:00 |
|
NETDUINO_PLUS_2
|
stm32: Rename MICROPY_HW_HAS_SDCARD to MICROPY_HW_ENABLE_SDCARD.
|
2019-04-01 15:21:26 +11:00 |
|
NUCLEO_F091RC
|
stm32/system_stm32f0: Add support for using HSE and PLL as SYSCLK.
|
2019-04-18 16:00:45 +10:00 |
|
NUCLEO_F401RE
|
stm32: Add compile-time option to use HSI as clock source.
|
2019-03-05 15:49:08 +11:00 |
|
NUCLEO_F411RE
|
stm32/Makefile: Allow a board to config either 1 or 2 firmware sections.
|
2018-03-27 21:24:15 +11:00 |
|
NUCLEO_F413ZH
|
stm32/boards: Add NUCLEO_F413ZH board configuration.
|
2019-05-02 16:33:30 +10:00 |
|
NUCLEO_F429ZI
|
stm32/boards: Enable ussl module via mbedtls for boards with network.
|
2019-06-24 17:48:28 +10:00 |
|
NUCLEO_F446RE
|
stm32/Makefile: Allow a board to config either 1 or 2 firmware sections.
|
2018-03-27 21:24:15 +11:00 |
|
NUCLEO_F746ZG
|
stm32/boards: Update pins.csv to include USB pins where needed.
|
2018-05-01 17:38:51 +10:00 |
|
NUCLEO_F767ZI
|
stm32/boards: Enable ussl module via mbedtls for boards with network.
|
2019-06-24 17:48:28 +10:00 |
|
NUCLEO_H743ZI
|
stm32/boards/NUCLEO_H743ZI: Enable SPI3 on this board.
|
2019-05-15 16:08:10 +10:00 |
|
NUCLEO_L432KC
|
stm32/boards/NUCLEO_L432KC: Disable complex nos and default frozen mods.
|
2019-04-09 11:23:08 +10:00 |
|
NUCLEO_L476RG
|
stm32/boards/NUCLEO_L476RG: Add support for RNG, DAC and CAN1.
|
2019-02-14 00:28:28 +11:00 |
|
OLIMEX_E407
|
stm32: Rename MICROPY_HW_HAS_SDCARD to MICROPY_HW_ENABLE_SDCARD.
|
2019-04-01 15:21:26 +11:00 |
|
PYBD_SF2
|
stm32: Enter bootloader via a system reset.
|
2019-06-25 14:15:49 +10:00 |
|
PYBD_SF3
|
stm32/boards/PYBD_SFx: Enable ussl module using mbedTLS.
|
2019-06-05 15:38:01 +10:00 |
|
PYBD_SF6
|
stm32: Enter bootloader via a system reset.
|
2019-06-25 14:15:49 +10:00 |
|
PYBLITEV10
|
stm32: Rename MICROPY_HW_HAS_SDCARD to MICROPY_HW_ENABLE_SDCARD.
|
2019-04-01 15:21:26 +11:00 |
|
PYBV3
|
stm32: Rename MICROPY_HW_HAS_SDCARD to MICROPY_HW_ENABLE_SDCARD.
|
2019-04-01 15:21:26 +11:00 |
|
PYBV4
|
stm32: Rename MICROPY_HW_HAS_SDCARD to MICROPY_HW_ENABLE_SDCARD.
|
2019-04-01 15:21:26 +11:00 |
|
PYBV10
|
stm32: Rename MICROPY_HW_HAS_SDCARD to MICROPY_HW_ENABLE_SDCARD.
|
2019-04-01 15:21:26 +11:00 |
|
PYBV11
|
stm32: Rename MICROPY_HW_HAS_SDCARD to MICROPY_HW_ENABLE_SDCARD.
|
2019-04-01 15:21:26 +11:00 |
|
STM32F4DISC
|
stm32/boards: Update pins.csv to include USB pins where needed.
|
2018-05-01 17:38:51 +10:00 |
|
STM32F7DISC
|
stm32/boards: Enable ussl module via mbedtls for boards with network.
|
2019-06-24 17:48:28 +10:00 |
|
STM32F411DISC
|
stm32/boards: Update pins.csv to include USB pins where needed.
|
2018-05-01 17:38:51 +10:00 |
|
STM32F429DISC
|
stm32/boards/STM32F429DISC: Enable UART as secondary REPL.
|
2018-12-01 17:30:48 +11:00 |
|
STM32F439
|
stm32: Rename MICROPY_HW_HAS_SDCARD to MICROPY_HW_ENABLE_SDCARD.
|
2019-04-01 15:21:26 +11:00 |
|
STM32F769DISC
|
stm32: Enter bootloader via a system reset.
|
2019-06-25 14:15:49 +10:00 |
|
STM32L476DISC
|
stm32/boards/STM32L476DISC: Enable servo support on STM32L476DISC board.
|
2019-03-28 15:35:58 +11:00 |
|
STM32L496GDISC
|
stm32/boards: Add config files for new board, STM32L496GDISC.
|
2018-05-18 22:39:49 +10:00 |
|
common_basic.ld
|
stm32/boards: Add common_basic.ld for a board to have a single section.
|
2018-03-27 21:29:45 +11:00 |
|
common_bl.ld
|
stm32/boards: Add common_bl.ld for boards that need a bootloader.
|
2018-03-27 21:30:45 +11:00 |
|
common_blifs.ld
|
stm32/boards: Add configuration for putting mboot on PYBv1.x.
|
2018-12-04 23:48:18 +11:00 |
|
common_ifs.ld
|
stm32/boards: Allow boards to have finer control over the linker script.
|
2018-03-27 21:17:48 +11:00 |
|
make-pins.py
|
stm32/boards/make-pins.py: Allow pins.csv to skip or hide board-pin name
|
2019-05-31 21:41:30 +10:00 |
|
openocd_stm32f4.cfg
|
stm32/boards: Allow OpenOCD stm_flash procedure to accept single FW img.
|
2018-12-13 13:43:10 +11:00 |
|
openocd_stm32f7.cfg
|
stm32/boards: Allow OpenOCD stm_flash procedure to accept single FW img.
|
2018-12-13 13:43:10 +11:00 |
|
openocd_stm32l4.cfg
|
stm32/boards: Allow OpenOCD stm_flash procedure to accept single FW img.
|
2018-12-13 13:43:10 +11:00 |
|
pllvalues.py
|
stm32/boards/pllvalues.py: Support HSx_VALUE defined without uint32_t.
|
2019-06-25 14:18:24 +10:00 |
|
startup_stm32f0.s
|
stm32/boards: Add startup_stm32f0.s for STM32F0 MCUs.
|
2018-05-28 21:49:49 +10:00 |
|
startup_stm32f4.s
|
stm32: Enable UART7/8 on F4 series that have these peripherals.
|
2018-05-16 11:55:07 +10:00 |
|
startup_stm32f7.s
|
stm32/boards: Add startup_stm32f7.s for F7 series specific startup.
|
2018-03-09 15:13:56 +11:00 |
|
startup_stm32f413xx.s
|
stm32: Add support for F413 MCUs.
|
2019-05-02 16:26:53 +10:00 |
|
startup_stm32h7.s
|
stm32/boards: Add startup_stm32h7.s for H7 series specific startup.
|
2018-03-09 15:13:13 +11:00 |
|
startup_stm32l4.s
|
stm32: Add support for STM32L496 MCU.
|
2018-05-18 22:37:30 +10:00 |
|
stm32f0xx_hal_conf_base.h
|
stm32/boards: Add stm32??xx_hal_conf_base.h files with common settings.
|
2019-06-25 14:18:24 +10:00 |
|
stm32f4xx_hal_conf_base.h
|
stm32/boards: Add stm32??xx_hal_conf_base.h files with common settings.
|
2019-06-25 14:18:24 +10:00 |
|
stm32f4xx_prefix.c
|
stm32/pin: In pin AF object, remove union of periph ptr types.
|
2018-04-11 16:14:58 +10:00 |
|
stm32f7xx_hal_conf_base.h
|
stm32/boards: Add stm32??xx_hal_conf_base.h files with common settings.
|
2019-06-25 14:18:24 +10:00 |
|
stm32f091_af.csv
|
stm32/boards/stm32f091_af.csv: Split labels that are multiple funcs.
|
2018-06-18 13:05:24 +10:00 |
|
stm32f091xc.ld
|
stm32: Enter bootloader via a system reset.
|
2019-06-25 14:15:49 +10:00 |
|
stm32f401_af.csv
|
stm32/boards: Split combined alt-func labels and fix some other errors.
|
2018-05-29 21:37:49 +10:00 |
|
stm32f401xd.ld
|
stm32: Enter bootloader via a system reset.
|
2019-06-25 14:15:49 +10:00 |
|
stm32f401xe.ld
|
stm32: Enter bootloader via a system reset.
|
2019-06-25 14:15:49 +10:00 |
|
stm32f405.ld
|
stm32: Enter bootloader via a system reset.
|
2019-06-25 14:15:49 +10:00 |
|
stm32f405_af.csv
|
stm32/boards/*_af.csv: Make consistent use of JTMS, JTCK, SWDIO, SWCLK.
|
2017-12-01 14:51:36 +11:00 |
|
stm32f411.ld
|
stm32: Enter bootloader via a system reset.
|
2019-06-25 14:15:49 +10:00 |
|
stm32f411_af.csv
|
stm32/boards: Split combined alt-func labels and fix some other errors.
|
2018-05-29 21:37:49 +10:00 |
|
stm32f413_af.csv
|
stm32: Add support for F413 MCUs.
|
2019-05-02 16:26:53 +10:00 |
|
stm32f413xg.ld
|
stm32: Enter bootloader via a system reset.
|
2019-06-25 14:15:49 +10:00 |
|
stm32f413xh.ld
|
stm32: Enter bootloader via a system reset.
|
2019-06-25 14:15:49 +10:00 |
|
stm32f429.ld
|
stm32: Enter bootloader via a system reset.
|
2019-06-25 14:15:49 +10:00 |
|
stm32f429_af.csv
|
stm32/boards/stm32f429_af.csv: Fix typos in UART defs Tx->TX and Rx->RX.
|
2019-01-31 01:02:42 +11:00 |
|
stm32f439.ld
|
stm32: Enter bootloader via a system reset.
|
2019-06-25 14:15:49 +10:00 |
|
stm32f439_af.csv
|
stm32: Enable UART7/8 on F4 series that have these peripherals.
|
2018-05-16 11:55:07 +10:00 |
|
stm32f722.ld
|
stm32: Enter bootloader via a system reset.
|
2019-06-25 14:15:49 +10:00 |
|
stm32f722_af.csv
|
stm32/boards: Add .ld and af.csv files for STM32F722.
|
2018-06-22 15:39:10 +10:00 |
|
stm32f746.ld
|
stm32: Enter bootloader via a system reset.
|
2019-06-25 14:15:49 +10:00 |
|
stm32f746_af.csv
|
stm32/boards/stm32f746_af.csv: Fix typos in AF table.
|
2017-11-20 14:19:12 +11:00 |
|
stm32f767.ld
|
stm32: Enter bootloader via a system reset.
|
2019-06-25 14:15:49 +10:00 |
|
stm32f767_af.csv
|
stm32/boards/stm32f767_af.csv: Add ADC column to pin capability list.
|
2018-03-07 18:40:06 +11:00 |
|
stm32f769.ld
|
stm32: Enter bootloader via a system reset.
|
2019-06-25 14:15:49 +10:00 |
|
stm32h7xx_hal_conf_base.h
|
stm32/boards: Add stm32??xx_hal_conf_base.h files with common settings.
|
2019-06-25 14:18:24 +10:00 |
|
stm32h743.ld
|
stm32: Enter bootloader via a system reset.
|
2019-06-25 14:15:49 +10:00 |
|
stm32h743_af.csv
|
stm32/boards/stm32h743_af.csv: Add ADC entries to pin capability table.
|
2019-02-06 13:34:53 +11:00 |
|
stm32l4xx_hal_conf_base.h
|
stm32/boards: Add stm32??xx_hal_conf_base.h files with common settings.
|
2019-06-25 14:18:24 +10:00 |
|
stm32l432.ld
|
stm32: Enter bootloader via a system reset.
|
2019-06-25 14:15:49 +10:00 |
|
stm32l432_af.csv
|
stm32/boards: Add STM32L432KC chip configuration files.
|
2018-12-06 13:32:43 +11:00 |
|
stm32l476_af.csv
|
stm32/boards: Split combined alt-func labels and fix some other errors.
|
2018-05-29 21:37:49 +10:00 |
|
stm32l476xe.ld
|
stm32: Enter bootloader via a system reset.
|
2019-06-25 14:15:49 +10:00 |
|
stm32l476xg.ld
|
stm32: Enter bootloader via a system reset.
|
2019-06-25 14:15:49 +10:00 |
|
stm32l496_af.csv
|
stm32/boards: Split combined alt-func labels and fix some other errors.
|
2018-05-29 21:37:49 +10:00 |
|
stm32l496xg.ld
|
stm32: Enter bootloader via a system reset.
|
2019-06-25 14:15:49 +10:00 |
f96f53cd97