1095 lines
48 KiB
C
1095 lines
48 KiB
C
/**
|
|
******************************************************************************
|
|
* @file stm32l4xx_hal_rtc_ex.h
|
|
* @author MCD Application Team
|
|
* @version V1.3.0
|
|
* @date 29-January-2016
|
|
* @brief Header file of RTC HAL Extended module.
|
|
******************************************************************************
|
|
* @attention
|
|
*
|
|
* <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without modification,
|
|
* are permitted provided that the following conditions are met:
|
|
* 1. Redistributions of source code must retain the above copyright notice,
|
|
* this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright notice,
|
|
* this list of conditions and the following disclaimer in the documentation
|
|
* and/or other materials provided with the distribution.
|
|
* 3. Neither the name of STMicroelectronics nor the names of its contributors
|
|
* may be used to endorse or promote products derived from this software
|
|
* without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
|
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
|
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
|
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
|
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
|
|
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
|
|
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
|
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
*
|
|
******************************************************************************
|
|
*/
|
|
|
|
/* Define to prevent recursive inclusion -------------------------------------*/
|
|
#ifndef __STM32L4xx_HAL_RTC_EX_H
|
|
#define __STM32L4xx_HAL_RTC_EX_H
|
|
|
|
#ifdef __cplusplus
|
|
extern "C" {
|
|
#endif
|
|
|
|
/* Includes ------------------------------------------------------------------*/
|
|
#include "stm32l4xx_hal_def.h"
|
|
|
|
/** @addtogroup STM32L4xx_HAL_Driver
|
|
* @{
|
|
*/
|
|
|
|
/** @addtogroup RTCEx
|
|
* @{
|
|
*/
|
|
|
|
/* Exported types ------------------------------------------------------------*/
|
|
/** @defgroup RTCEx_Exported_Types RTCEx Exported Types
|
|
* @{
|
|
*/
|
|
/**
|
|
* @brief RTC Tamper structure definition
|
|
*/
|
|
typedef struct
|
|
{
|
|
uint32_t Tamper; /*!< Specifies the Tamper Pin.
|
|
This parameter can be a value of @ref RTCEx_Tamper_Pins_Definitions */
|
|
|
|
uint32_t Interrupt; /*!< Specifies the Tamper Interrupt.
|
|
This parameter can be a value of @ref RTCEx_Tamper_Interrupt_Definitions */
|
|
|
|
uint32_t Trigger; /*!< Specifies the Tamper Trigger.
|
|
This parameter can be a value of @ref RTCEx_Tamper_Trigger_Definitions */
|
|
|
|
uint32_t NoErase; /*!< Specifies the Tamper no erase mode.
|
|
This parameter can be a value of @ref RTCEx_Tamper_EraseBackUp_Definitions */
|
|
|
|
uint32_t MaskFlag; /*!< Specifies the Tamper Flag masking.
|
|
This parameter can be a value of @ref RTCEx_Tamper_MaskFlag_Definitions */
|
|
|
|
uint32_t Filter; /*!< Specifies the RTC Filter Tamper.
|
|
This parameter can be a value of @ref RTCEx_Tamper_Filter_Definitions */
|
|
|
|
uint32_t SamplingFrequency; /*!< Specifies the sampling frequency.
|
|
This parameter can be a value of @ref RTCEx_Tamper_Sampling_Frequencies_Definitions */
|
|
|
|
uint32_t PrechargeDuration; /*!< Specifies the Precharge Duration .
|
|
This parameter can be a value of @ref RTCEx_Tamper_Pin_Precharge_Duration_Definitions */
|
|
|
|
uint32_t TamperPullUp; /*!< Specifies the Tamper PullUp .
|
|
This parameter can be a value of @ref RTCEx_Tamper_Pull_UP_Definitions */
|
|
|
|
uint32_t TimeStampOnTamperDetection; /*!< Specifies the TimeStampOnTamperDetection.
|
|
This parameter can be a value of @ref RTCEx_Tamper_TimeStampOnTamperDetection_Definitions */
|
|
}RTC_TamperTypeDef;
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/* Exported constants --------------------------------------------------------*/
|
|
/** @defgroup RTCEx_Exported_Constants RTCEx Exported Constants
|
|
* @{
|
|
*/
|
|
|
|
/** @defgroup RTCEx_Output_selection_Definitions RTC Output Selection Definitions
|
|
* @{
|
|
*/
|
|
#define RTC_OUTPUT_DISABLE ((uint32_t)0x00000000)
|
|
#define RTC_OUTPUT_ALARMA ((uint32_t)0x00200000)
|
|
#define RTC_OUTPUT_ALARMB ((uint32_t)0x00400000)
|
|
#define RTC_OUTPUT_WAKEUP ((uint32_t)0x00600000)
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RTCEx_Backup_Registers_Definitions RTC Backup Registers Definitions
|
|
* @{
|
|
*/
|
|
#define RTC_BKP_DR0 ((uint32_t)0x00000000)
|
|
#define RTC_BKP_DR1 ((uint32_t)0x00000001)
|
|
#define RTC_BKP_DR2 ((uint32_t)0x00000002)
|
|
#define RTC_BKP_DR3 ((uint32_t)0x00000003)
|
|
#define RTC_BKP_DR4 ((uint32_t)0x00000004)
|
|
#define RTC_BKP_DR5 ((uint32_t)0x00000005)
|
|
#define RTC_BKP_DR6 ((uint32_t)0x00000006)
|
|
#define RTC_BKP_DR7 ((uint32_t)0x00000007)
|
|
#define RTC_BKP_DR8 ((uint32_t)0x00000008)
|
|
#define RTC_BKP_DR9 ((uint32_t)0x00000009)
|
|
#define RTC_BKP_DR10 ((uint32_t)0x0000000A)
|
|
#define RTC_BKP_DR11 ((uint32_t)0x0000000B)
|
|
#define RTC_BKP_DR12 ((uint32_t)0x0000000C)
|
|
#define RTC_BKP_DR13 ((uint32_t)0x0000000D)
|
|
#define RTC_BKP_DR14 ((uint32_t)0x0000000E)
|
|
#define RTC_BKP_DR15 ((uint32_t)0x0000000F)
|
|
#define RTC_BKP_DR16 ((uint32_t)0x00000010)
|
|
#define RTC_BKP_DR17 ((uint32_t)0x00000011)
|
|
#define RTC_BKP_DR18 ((uint32_t)0x00000012)
|
|
#define RTC_BKP_DR19 ((uint32_t)0x00000013)
|
|
#define RTC_BKP_DR20 ((uint32_t)0x00000014)
|
|
#define RTC_BKP_DR21 ((uint32_t)0x00000015)
|
|
#define RTC_BKP_DR22 ((uint32_t)0x00000016)
|
|
#define RTC_BKP_DR23 ((uint32_t)0x00000017)
|
|
#define RTC_BKP_DR24 ((uint32_t)0x00000018)
|
|
#define RTC_BKP_DR25 ((uint32_t)0x00000019)
|
|
#define RTC_BKP_DR26 ((uint32_t)0x0000001A)
|
|
#define RTC_BKP_DR27 ((uint32_t)0x0000001B)
|
|
#define RTC_BKP_DR28 ((uint32_t)0x0000001C)
|
|
#define RTC_BKP_DR29 ((uint32_t)0x0000001D)
|
|
#define RTC_BKP_DR30 ((uint32_t)0x0000001E)
|
|
#define RTC_BKP_DR31 ((uint32_t)0x0000001F)
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RTCEx_TimeStamp_Edges_definitions RTC TimeStamp Edges Definitions
|
|
* @{
|
|
*/
|
|
#define RTC_TIMESTAMPEDGE_RISING ((uint32_t)0x00000000)
|
|
#define RTC_TIMESTAMPEDGE_FALLING ((uint32_t)0x00000008)
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RTCEx_TimeStamp_Pin_Selection RTC TimeStamp Pins Selection
|
|
* @{
|
|
*/
|
|
#define RTC_TIMESTAMPPIN_DEFAULT ((uint32_t)0x00000000)
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RTCEx_Tamper_Pins_Definitions RTC Tamper Pins Definitions
|
|
* @{
|
|
*/
|
|
#if defined(RTC_TAMPER1_SUPPORT)
|
|
#define RTC_TAMPER_1 RTC_TAMPCR_TAMP1E
|
|
#endif /* RTC_TAMPER1_SUPPORT */
|
|
#define RTC_TAMPER_2 RTC_TAMPCR_TAMP2E
|
|
#if defined(RTC_TAMPER3_SUPPORT)
|
|
#define RTC_TAMPER_3 RTC_TAMPCR_TAMP3E
|
|
#endif /* RTC_TAMPER3_SUPPORT */
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RTCEx_Tamper_Interrupt_Definitions RTC Tamper Interrupts Definitions
|
|
* @{
|
|
*/
|
|
#if defined(RTC_TAMPER1_SUPPORT)
|
|
#define RTC_TAMPER1_INTERRUPT RTC_TAMPCR_TAMP1IE
|
|
#endif /* RTC_TAMPER1_SUPPORT */
|
|
#define RTC_TAMPER2_INTERRUPT RTC_TAMPCR_TAMP2IE
|
|
#if defined(RTC_TAMPER3_SUPPORT)
|
|
#define RTC_TAMPER3_INTERRUPT RTC_TAMPCR_TAMP3IE
|
|
#endif /* RTC_TAMPER3_SUPPORT */
|
|
#define RTC_ALL_TAMPER_INTERRUPT RTC_TAMPCR_TAMPIE
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RTCEx_Tamper_Trigger_Definitions RTC Tamper Triggers Definitions
|
|
* @{
|
|
*/
|
|
#define RTC_TAMPERTRIGGER_RISINGEDGE ((uint32_t)0x00000000)
|
|
#define RTC_TAMPERTRIGGER_FALLINGEDGE ((uint32_t)0x00000002)
|
|
#define RTC_TAMPERTRIGGER_LOWLEVEL RTC_TAMPERTRIGGER_RISINGEDGE
|
|
#define RTC_TAMPERTRIGGER_HIGHLEVEL RTC_TAMPERTRIGGER_FALLINGEDGE
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RTCEx_Tamper_EraseBackUp_Definitions RTC Tamper EraseBackUp Definitions
|
|
* @{
|
|
*/
|
|
#define RTC_TAMPER_ERASE_BACKUP_ENABLE ((uint32_t)0x00000000)
|
|
#define RTC_TAMPER_ERASE_BACKUP_DISABLE ((uint32_t)0x00020000)
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RTCEx_Tamper_MaskFlag_Definitions RTC Tamper Mask Flag Definitions
|
|
* @{
|
|
*/
|
|
#define RTC_TAMPERMASK_FLAG_DISABLE ((uint32_t)0x00000000)
|
|
#define RTC_TAMPERMASK_FLAG_ENABLE ((uint32_t)0x00040000)
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RTCEx_Tamper_Filter_Definitions RTC Tamper Filter Definitions
|
|
* @{
|
|
*/
|
|
#define RTC_TAMPERFILTER_DISABLE ((uint32_t)0x00000000) /*!< Tamper filter is disabled */
|
|
|
|
#define RTC_TAMPERFILTER_2SAMPLE ((uint32_t)0x00000800) /*!< Tamper is activated after 2
|
|
consecutive samples at the active level */
|
|
#define RTC_TAMPERFILTER_4SAMPLE ((uint32_t)0x00001000) /*!< Tamper is activated after 4
|
|
consecutive samples at the active level */
|
|
#define RTC_TAMPERFILTER_8SAMPLE ((uint32_t)0x00001800) /*!< Tamper is activated after 8
|
|
consecutive samples at the active level. */
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RTCEx_Tamper_Sampling_Frequencies_Definitions RTC Tamper Sampling Frequencies Definitions
|
|
* @{
|
|
*/
|
|
#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV32768 ((uint32_t)0x00000000) /*!< Each of the tamper inputs are sampled
|
|
with a frequency = RTCCLK / 32768 */
|
|
#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV16384 ((uint32_t)0x00000100) /*!< Each of the tamper inputs are sampled
|
|
with a frequency = RTCCLK / 16384 */
|
|
#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV8192 ((uint32_t)0x00000200) /*!< Each of the tamper inputs are sampled
|
|
with a frequency = RTCCLK / 8192 */
|
|
#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV4096 ((uint32_t)0x00000300) /*!< Each of the tamper inputs are sampled
|
|
with a frequency = RTCCLK / 4096 */
|
|
#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV2048 ((uint32_t)0x00000400) /*!< Each of the tamper inputs are sampled
|
|
with a frequency = RTCCLK / 2048 */
|
|
#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV1024 ((uint32_t)0x00000500) /*!< Each of the tamper inputs are sampled
|
|
with a frequency = RTCCLK / 1024 */
|
|
#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV512 ((uint32_t)0x00000600) /*!< Each of the tamper inputs are sampled
|
|
with a frequency = RTCCLK / 512 */
|
|
#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV256 ((uint32_t)0x00000700) /*!< Each of the tamper inputs are sampled
|
|
with a frequency = RTCCLK / 256 */
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RTCEx_Tamper_Pin_Precharge_Duration_Definitions RTC Tamper Pin Precharge Duration Definitions
|
|
* @{
|
|
*/
|
|
#define RTC_TAMPERPRECHARGEDURATION_1RTCCLK ((uint32_t)0x00000000) /*!< Tamper pins are pre-charged before
|
|
sampling during 1 RTCCLK cycle */
|
|
#define RTC_TAMPERPRECHARGEDURATION_2RTCCLK ((uint32_t)0x00002000) /*!< Tamper pins are pre-charged before
|
|
sampling during 2 RTCCLK cycles */
|
|
#define RTC_TAMPERPRECHARGEDURATION_4RTCCLK ((uint32_t)0x00004000) /*!< Tamper pins are pre-charged before
|
|
sampling during 4 RTCCLK cycles */
|
|
#define RTC_TAMPERPRECHARGEDURATION_8RTCCLK ((uint32_t)0x00006000) /*!< Tamper pins are pre-charged before
|
|
sampling during 8 RTCCLK cycles */
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RTCEx_Tamper_TimeStampOnTamperDetection_Definitions RTC Tamper TimeStamp On Tamper Detection Definitions
|
|
* @{
|
|
*/
|
|
#define RTC_TIMESTAMPONTAMPERDETECTION_ENABLE ((uint32_t)RTC_TAMPCR_TAMPTS) /*!< TimeStamp on Tamper Detection event saved */
|
|
#define RTC_TIMESTAMPONTAMPERDETECTION_DISABLE ((uint32_t)0x00000000) /*!< TimeStamp on Tamper Detection event is not saved */
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RTCEx_Tamper_Pull_UP_Definitions RTC Tamper Pull Up Definitions
|
|
* @{
|
|
*/
|
|
#define RTC_TAMPER_PULLUP_ENABLE ((uint32_t)0x00000000) /*!< TimeStamp on Tamper Detection event saved */
|
|
#define RTC_TAMPER_PULLUP_DISABLE ((uint32_t)RTC_TAMPCR_TAMPPUDIS) /*!< TimeStamp on Tamper Detection event is not saved */
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RTCEx_Wakeup_Timer_Definitions RTC Wakeup Timer Definitions
|
|
* @{
|
|
*/
|
|
#define RTC_WAKEUPCLOCK_RTCCLK_DIV16 ((uint32_t)0x00000000)
|
|
#define RTC_WAKEUPCLOCK_RTCCLK_DIV8 ((uint32_t)0x00000001)
|
|
#define RTC_WAKEUPCLOCK_RTCCLK_DIV4 ((uint32_t)0x00000002)
|
|
#define RTC_WAKEUPCLOCK_RTCCLK_DIV2 ((uint32_t)0x00000003)
|
|
#define RTC_WAKEUPCLOCK_CK_SPRE_16BITS ((uint32_t)0x00000004)
|
|
#define RTC_WAKEUPCLOCK_CK_SPRE_17BITS ((uint32_t)0x00000006)
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RTCEx_Smooth_calib_period_Definitions RTC Smooth Calib Period Definitions
|
|
* @{
|
|
*/
|
|
#define RTC_SMOOTHCALIB_PERIOD_32SEC ((uint32_t)0x00000000) /*!< If RTCCLK = 32768 Hz, Smooth calibration
|
|
period is 32s, else 2exp20 RTCCLK seconds */
|
|
#define RTC_SMOOTHCALIB_PERIOD_16SEC ((uint32_t)0x00002000) /*!< If RTCCLK = 32768 Hz, Smooth calibration
|
|
period is 16s, else 2exp19 RTCCLK seconds */
|
|
#define RTC_SMOOTHCALIB_PERIOD_8SEC ((uint32_t)0x00004000) /*!< If RTCCLK = 32768 Hz, Smooth calibration
|
|
period is 8s, else 2exp18 RTCCLK seconds */
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RTCEx_Smooth_calib_Plus_pulses_Definitions RTC Smooth Calib Plus Pulses Definitions
|
|
* @{
|
|
*/
|
|
#define RTC_SMOOTHCALIB_PLUSPULSES_SET ((uint32_t)0x00008000) /*!< The number of RTCCLK pulses added
|
|
during a X -second window = Y - CALM[8:0]
|
|
with Y = 512, 256, 128 when X = 32, 16, 8 */
|
|
#define RTC_SMOOTHCALIB_PLUSPULSES_RESET ((uint32_t)0x00000000) /*!< The number of RTCCLK pulses subbstited
|
|
during a 32-second window = CALM[8:0] */
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RTCEx_Calib_Output_selection_Definitions RTC Calib Output Selection Definitions
|
|
* @{
|
|
*/
|
|
#define RTC_CALIBOUTPUT_512HZ ((uint32_t)0x00000000)
|
|
#define RTC_CALIBOUTPUT_1HZ ((uint32_t)0x00080000)
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RTCEx_Add_1_Second_Parameter_Definitions RTC Add 1 Second Parameter Definitions
|
|
* @{
|
|
*/
|
|
#define RTC_SHIFTADD1S_RESET ((uint32_t)0x00000000)
|
|
#define RTC_SHIFTADD1S_SET ((uint32_t)0x80000000)
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/* Exported macros -----------------------------------------------------------*/
|
|
/** @defgroup RTCEx_Exported_Macros RTCEx Exported Macros
|
|
* @{
|
|
*/
|
|
|
|
/**
|
|
* @brief Enable the RTC WakeUp Timer peripheral.
|
|
* @param __HANDLE__: specifies the RTC handle.
|
|
* @retval None
|
|
*/
|
|
#define __HAL_RTC_WAKEUPTIMER_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= (RTC_CR_WUTE))
|
|
|
|
/**
|
|
* @brief Disable the RTC WakeUp Timer peripheral.
|
|
* @param __HANDLE__: specifies the RTC handle.
|
|
* @retval None
|
|
*/
|
|
#define __HAL_RTC_WAKEUPTIMER_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~(RTC_CR_WUTE))
|
|
|
|
/**
|
|
* @brief Enable the RTC WakeUpTimer interrupt.
|
|
* @param __HANDLE__: specifies the RTC handle.
|
|
* @param __INTERRUPT__: specifies the RTC WakeUpTimer interrupt sources to be enabled.
|
|
* This parameter can be:
|
|
* @arg RTC_IT_WUT: WakeUpTimer interrupt
|
|
* @retval None
|
|
*/
|
|
#define __HAL_RTC_WAKEUPTIMER_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR |= (__INTERRUPT__))
|
|
|
|
/**
|
|
* @brief Disable the RTC WakeUpTimer interrupt.
|
|
* @param __HANDLE__: specifies the RTC handle.
|
|
* @param __INTERRUPT__: specifies the RTC WakeUpTimer interrupt sources to be disabled.
|
|
* This parameter can be:
|
|
* @arg RTC_IT_WUT: WakeUpTimer interrupt
|
|
* @retval None
|
|
*/
|
|
#define __HAL_RTC_WAKEUPTIMER_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR &= ~(__INTERRUPT__))
|
|
|
|
/**
|
|
* @brief Check whether the specified RTC WakeUpTimer interrupt has occurred or not.
|
|
* @param __HANDLE__: specifies the RTC handle.
|
|
* @param __INTERRUPT__: specifies the RTC WakeUpTimer interrupt sources to check.
|
|
* This parameter can be:
|
|
* @arg RTC_IT_WUT: WakeUpTimer interrupt
|
|
* @retval None
|
|
*/
|
|
#define __HAL_RTC_WAKEUPTIMER_GET_IT(__HANDLE__, __INTERRUPT__) (((((__HANDLE__)->Instance->ISR) & ((__INTERRUPT__)>> 4)) != RESET) ? SET : RESET)
|
|
|
|
/**
|
|
* @brief Check whether the specified RTC Wake Up timer interrupt is enabled or not.
|
|
* @param __HANDLE__: specifies the RTC handle.
|
|
* @param __INTERRUPT__: specifies the RTC Wake Up timer interrupt sources to check.
|
|
* This parameter can be:
|
|
* @arg RTC_IT_WUT: WakeUpTimer interrupt
|
|
* @retval None
|
|
*/
|
|
#define __HAL_RTC_WAKEUPTIMER_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) (((((__HANDLE__)->Instance->CR) & (__INTERRUPT__)) != RESET) ? SET : RESET)
|
|
|
|
/**
|
|
* @brief Get the selected RTC WakeUpTimer's flag status.
|
|
* @param __HANDLE__: specifies the RTC handle.
|
|
* @param __FLAG__: specifies the RTC WakeUpTimer Flag is pending or not.
|
|
* This parameter can be:
|
|
* @arg RTC_FLAG_WUTF
|
|
* @arg RTC_FLAG_WUTWF
|
|
* @retval None
|
|
*/
|
|
#define __HAL_RTC_WAKEUPTIMER_GET_FLAG(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->ISR) & (__FLAG__)) != RESET) ? SET : RESET)
|
|
|
|
/**
|
|
* @brief Clear the RTC Wake Up timer's pending flags.
|
|
* @param __HANDLE__: specifies the RTC handle.
|
|
* @param __FLAG__: specifies the RTC WakeUpTimer Flag to clear.
|
|
* This parameter can be:
|
|
* @arg RTC_FLAG_WUTF
|
|
* @retval None
|
|
*/
|
|
#define __HAL_RTC_WAKEUPTIMER_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ISR) = (~((__FLAG__) | RTC_ISR_INIT)|((__HANDLE__)->Instance->ISR & RTC_ISR_INIT))
|
|
|
|
/**
|
|
* @brief Enable the RTC Tamper1 input detection.
|
|
* @param __HANDLE__: specifies the RTC handle.
|
|
* @retval None
|
|
*/
|
|
#define __HAL_RTC_TAMPER1_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->TAMPCR |= (RTC_TAMPCR_TAMP1E))
|
|
|
|
/**
|
|
* @brief Disable the RTC Tamper1 input detection.
|
|
* @param __HANDLE__: specifies the RTC handle.
|
|
* @retval None
|
|
*/
|
|
#define __HAL_RTC_TAMPER1_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->TAMPCR &= ~(RTC_TAMPCR_TAMP1E))
|
|
|
|
/**
|
|
* @brief Enable the RTC Tamper2 input detection.
|
|
* @param __HANDLE__: specifies the RTC handle.
|
|
* @retval None
|
|
*/
|
|
#define __HAL_RTC_TAMPER2_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->TAMPCR |= (RTC_TAMPCR_TAMP2E))
|
|
|
|
/**
|
|
* @brief Disable the RTC Tamper2 input detection.
|
|
* @param __HANDLE__: specifies the RTC handle.
|
|
* @retval None
|
|
*/
|
|
#define __HAL_RTC_TAMPER2_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->TAMPCR &= ~(RTC_TAMPCR_TAMP2E))
|
|
|
|
/**
|
|
* @brief Enable the RTC Tamper3 input detection.
|
|
* @param __HANDLE__: specifies the RTC handle.
|
|
* @retval None
|
|
*/
|
|
#define __HAL_RTC_TAMPER3_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->TAMPCR |= (RTC_TAMPCR_TAMP3E))
|
|
|
|
/**
|
|
* @brief Disable the RTC Tamper3 input detection.
|
|
* @param __HANDLE__: specifies the RTC handle.
|
|
* @retval None
|
|
*/
|
|
#define __HAL_RTC_TAMPER3_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->TAMPCR &= ~(RTC_TAMPCR_TAMP3E))
|
|
|
|
/**
|
|
* @brief Enable the RTC Tamper interrupt.
|
|
* @param __HANDLE__: specifies the RTC handle.
|
|
* @param __INTERRUPT__: specifies the RTC Tamper interrupt sources to be enabled.
|
|
* This parameter can be any combination of the following values:
|
|
* @arg RTC_IT_TAMP: All tampers interrupts
|
|
* @arg RTC_IT_TAMP1: Tamper1 interrupt
|
|
* @arg RTC_IT_TAMP2: Tamper2 interrupt
|
|
* @arg RTC_IT_TAMP3: Tamper3 interrupt
|
|
* @retval None
|
|
*/
|
|
#define __HAL_RTC_TAMPER_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->TAMPCR |= (__INTERRUPT__))
|
|
|
|
/**
|
|
* @brief Disable the RTC Tamper interrupt.
|
|
* @param __HANDLE__: specifies the RTC handle.
|
|
* @param __INTERRUPT__: specifies the RTC Tamper interrupt sources to be disabled.
|
|
* This parameter can be any combination of the following values:
|
|
* @arg RTC_IT_TAMP: All tampers interrupts
|
|
* @arg RTC_IT_TAMP1: Tamper1 interrupt
|
|
* @arg RTC_IT_TAMP2: Tamper2 interrupt
|
|
* @arg RTC_IT_TAMP3: Tamper3 interrupt
|
|
* @retval None
|
|
*/
|
|
#define __HAL_RTC_TAMPER_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->TAMPCR &= ~(__INTERRUPT__))
|
|
|
|
/**
|
|
* @brief Check whether the specified RTC Tamper interrupt has occurred or not.
|
|
* @param __HANDLE__: specifies the RTC handle.
|
|
* @param __INTERRUPT__: specifies the RTC Tamper interrupt to check.
|
|
* This parameter can be:
|
|
* @arg RTC_IT_TAMP1: Tamper1 interrupt
|
|
* @arg RTC_IT_TAMP2: Tamper2 interrupt
|
|
* @arg RTC_IT_TAMP3: Tamper3 interrupt
|
|
* @retval None
|
|
*/
|
|
#define __HAL_RTC_TAMPER_GET_IT(__HANDLE__, __INTERRUPT__) (((__INTERRUPT__) == RTC_IT_TAMP1) ? (((((__HANDLE__)->Instance->ISR) & ((__INTERRUPT__)>> 3)) != RESET) ? SET : RESET) : \
|
|
((__INTERRUPT__) == RTC_IT_TAMP2) ? (((((__HANDLE__)->Instance->ISR) & ((__INTERRUPT__)>> 5)) != RESET) ? SET : RESET) : \
|
|
(((((__HANDLE__)->Instance->ISR) & ((__INTERRUPT__)>> 7)) != RESET) ? SET : RESET))
|
|
|
|
/**
|
|
* @brief Check whether the specified RTC Tamper interrupt is enabled or not.
|
|
* @param __HANDLE__: specifies the RTC handle.
|
|
* @param __INTERRUPT__: specifies the RTC Tamper interrupt source to check.
|
|
* This parameter can be:
|
|
* @arg RTC_IT_TAMP: All tampers interrupts
|
|
* @arg RTC_IT_TAMP1: Tamper1 interrupt
|
|
* @arg RTC_IT_TAMP2: Tamper2 interrupt
|
|
* @arg RTC_IT_TAMP3: Tamper3 interrupt
|
|
* @retval None
|
|
*/
|
|
#define __HAL_RTC_TAMPER_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) (((((__HANDLE__)->Instance->TAMPCR) & (__INTERRUPT__)) != RESET) ? SET : RESET)
|
|
|
|
/**
|
|
* @brief Get the selected RTC Tamper's flag status.
|
|
* @param __HANDLE__: specifies the RTC handle.
|
|
* @param __FLAG__: specifies the RTC Tamper Flag is pending or not.
|
|
* This parameter can be:
|
|
* @arg RTC_FLAG_TAMP1F: Tamper1 flag
|
|
* @arg RTC_FLAG_TAMP2F: Tamper2 flag
|
|
* @arg RTC_FLAG_TAMP3F: Tamper3 flag
|
|
* @retval None
|
|
*/
|
|
#define __HAL_RTC_TAMPER_GET_FLAG(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->ISR) & (__FLAG__)) != RESET) ? SET : RESET)
|
|
|
|
/**
|
|
* @brief Clear the RTC Tamper's pending flags.
|
|
* @param __HANDLE__: specifies the RTC handle.
|
|
* @param __FLAG__: specifies the RTC Tamper Flag sources to clear.
|
|
* This parameter can be:
|
|
* @arg RTC_FLAG_TAMP1F: Tamper1 flag
|
|
* @arg RTC_FLAG_TAMP2F: Tamper2 flag
|
|
* @arg RTC_FLAG_TAMP3F: Tamper3 flag
|
|
* @retval None
|
|
*/
|
|
#define __HAL_RTC_TAMPER_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ISR) = (~((__FLAG__) | RTC_ISR_INIT)|((__HANDLE__)->Instance->ISR & RTC_ISR_INIT))
|
|
|
|
/**
|
|
* @brief Enable the RTC TimeStamp peripheral.
|
|
* @param __HANDLE__: specifies the RTC handle.
|
|
* @retval None
|
|
*/
|
|
#define __HAL_RTC_TIMESTAMP_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= (RTC_CR_TSE))
|
|
|
|
/**
|
|
* @brief Disable the RTC TimeStamp peripheral.
|
|
* @param __HANDLE__: specifies the RTC handle.
|
|
* @retval None
|
|
*/
|
|
#define __HAL_RTC_TIMESTAMP_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~(RTC_CR_TSE))
|
|
|
|
/**
|
|
* @brief Enable the RTC TimeStamp interrupt.
|
|
* @param __HANDLE__: specifies the RTC handle.
|
|
* @param __INTERRUPT__: specifies the RTC TimeStamp interrupt source to be enabled.
|
|
* This parameter can be:
|
|
* @arg RTC_IT_TS: TimeStamp interrupt
|
|
* @retval None
|
|
*/
|
|
#define __HAL_RTC_TIMESTAMP_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR |= (__INTERRUPT__))
|
|
|
|
/**
|
|
* @brief Disable the RTC TimeStamp interrupt.
|
|
* @param __HANDLE__: specifies the RTC handle.
|
|
* @param __INTERRUPT__: specifies the RTC TimeStamp interrupt source to be disabled.
|
|
* This parameter can be:
|
|
* @arg RTC_IT_TS: TimeStamp interrupt
|
|
* @retval None
|
|
*/
|
|
#define __HAL_RTC_TIMESTAMP_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR &= ~(__INTERRUPT__))
|
|
|
|
/**
|
|
* @brief Check whether the specified RTC TimeStamp interrupt has occurred or not.
|
|
* @param __HANDLE__: specifies the RTC handle.
|
|
* @param __INTERRUPT__: specifies the RTC TimeStamp interrupt source to check.
|
|
* This parameter can be:
|
|
* @arg RTC_IT_TS: TimeStamp interrupt
|
|
* @retval None
|
|
*/
|
|
#define __HAL_RTC_TIMESTAMP_GET_IT(__HANDLE__, __INTERRUPT__) (((((__HANDLE__)->Instance->ISR) & ((__INTERRUPT__)>> 4)) != RESET) ? SET : RESET)
|
|
|
|
/**
|
|
* @brief Check whether the specified RTC Time Stamp interrupt is enabled or not.
|
|
* @param __HANDLE__: specifies the RTC handle.
|
|
* @param __INTERRUPT__: specifies the RTC Time Stamp interrupt source to check.
|
|
* This parameter can be:
|
|
* @arg RTC_IT_TS: TimeStamp interrupt
|
|
* @retval None
|
|
*/
|
|
#define __HAL_RTC_TIMESTAMP_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) (((((__HANDLE__)->Instance->CR) & (__INTERRUPT__)) != RESET) ? SET : RESET)
|
|
|
|
/**
|
|
* @brief Get the selected RTC TimeStamp's flag status.
|
|
* @param __HANDLE__: specifies the RTC handle.
|
|
* @param __FLAG__: specifies the RTC TimeStamp Flag is pending or not.
|
|
* This parameter can be:
|
|
* @arg RTC_FLAG_TSF
|
|
* @arg RTC_FLAG_TSOVF
|
|
* @retval None
|
|
*/
|
|
#define __HAL_RTC_TIMESTAMP_GET_FLAG(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->ISR) & (__FLAG__)) != RESET) ? SET : RESET)
|
|
|
|
/**
|
|
* @brief Clear the RTC Time Stamp's pending flags.
|
|
* @param __HANDLE__: specifies the RTC handle.
|
|
* @param __FLAG__: specifies the RTC Alarm Flag sources to clear.
|
|
* This parameter can be:
|
|
* @arg RTC_FLAG_TSF
|
|
* @arg RTC_FLAG_TSOVF
|
|
* @retval None
|
|
*/
|
|
#define __HAL_RTC_TIMESTAMP_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ISR) = (~((__FLAG__) | RTC_ISR_INIT)|((__HANDLE__)->Instance->ISR & RTC_ISR_INIT))
|
|
|
|
/**
|
|
* @brief Enable the RTC internal TimeStamp peripheral.
|
|
* @param __HANDLE__: specifies the RTC handle.
|
|
* @retval None
|
|
*/
|
|
#define __HAL_RTC_INTERNAL_TIMESTAMP_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= (RTC_CR_ITSE))
|
|
|
|
/**
|
|
* @brief Disable the RTC internal TimeStamp peripheral.
|
|
* @param __HANDLE__: specifies the RTC handle.
|
|
* @retval None
|
|
*/
|
|
#define __HAL_RTC_INTERNAL_TIMESTAMP_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~(RTC_CR_ITSE))
|
|
|
|
/**
|
|
* @brief Get the selected RTC Internal Time Stamp's flag status.
|
|
* @param __HANDLE__: specifies the RTC handle.
|
|
* @param __FLAG__: specifies the RTC Internal Time Stamp Flag is pending or not.
|
|
* This parameter can be:
|
|
* @arg RTC_FLAG_ITSF
|
|
* @retval None
|
|
*/
|
|
#define __HAL_RTC_INTERNAL_TIMESTAMP_GET_FLAG(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->ISR) & (__FLAG__)) != RESET) ? SET : RESET)
|
|
|
|
/**
|
|
* @brief Clear the RTC Internal Time Stamp's pending flags.
|
|
* @param __HANDLE__: specifies the RTC handle.
|
|
* @param __FLAG__: specifies the RTC Internal Time Stamp Flag source to clear.
|
|
* This parameter can be:
|
|
* @arg RTC_FLAG_ITSF
|
|
* @retval None
|
|
*/
|
|
#define __HAL_RTC_INTERNAL_TIMESTAMP_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ISR) = (~((__FLAG__) | RTC_ISR_INIT)|((__HANDLE__)->Instance->ISR & RTC_ISR_INIT))
|
|
|
|
/**
|
|
* @brief Enable the RTC calibration output.
|
|
* @param __HANDLE__: specifies the RTC handle.
|
|
* @retval None
|
|
*/
|
|
#define __HAL_RTC_CALIBRATION_OUTPUT_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= (RTC_CR_COE))
|
|
|
|
/**
|
|
* @brief Disable the calibration output.
|
|
* @param __HANDLE__: specifies the RTC handle.
|
|
* @retval None
|
|
*/
|
|
#define __HAL_RTC_CALIBRATION_OUTPUT_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~(RTC_CR_COE))
|
|
|
|
/**
|
|
* @brief Enable the clock reference detection.
|
|
* @param __HANDLE__: specifies the RTC handle.
|
|
* @retval None
|
|
*/
|
|
#define __HAL_RTC_CLOCKREF_DETECTION_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= (RTC_CR_REFCKON))
|
|
|
|
/**
|
|
* @brief Disable the clock reference detection.
|
|
* @param __HANDLE__: specifies the RTC handle.
|
|
* @retval None
|
|
*/
|
|
#define __HAL_RTC_CLOCKREF_DETECTION_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~(RTC_CR_REFCKON))
|
|
|
|
/**
|
|
* @brief Get the selected RTC shift operation's flag status.
|
|
* @param __HANDLE__: specifies the RTC handle.
|
|
* @param __FLAG__: specifies the RTC shift operation Flag is pending or not.
|
|
* This parameter can be:
|
|
* @arg RTC_FLAG_SHPF
|
|
* @retval None
|
|
*/
|
|
#define __HAL_RTC_SHIFT_GET_FLAG(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->ISR) & (__FLAG__)) != RESET) ? SET : RESET)
|
|
|
|
/**
|
|
* @brief Enable interrupt on the RTC WakeUp Timer associated Exti line.
|
|
* @retval None
|
|
*/
|
|
#define __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_IT() (EXTI->IMR1 |= RTC_EXTI_LINE_WAKEUPTIMER_EVENT)
|
|
|
|
/**
|
|
* @brief Disable interrupt on the RTC WakeUp Timer associated Exti line.
|
|
* @retval None
|
|
*/
|
|
#define __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_IT() (EXTI->IMR1 &= ~(RTC_EXTI_LINE_WAKEUPTIMER_EVENT))
|
|
|
|
/**
|
|
* @brief Enable event on the RTC WakeUp Timer associated Exti line.
|
|
* @retval None
|
|
*/
|
|
#define __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_EVENT() (EXTI->EMR1 |= RTC_EXTI_LINE_WAKEUPTIMER_EVENT)
|
|
|
|
/**
|
|
* @brief Disable event on the RTC WakeUp Timer associated Exti line.
|
|
* @retval None
|
|
*/
|
|
#define __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_EVENT() (EXTI->EMR1 &= ~(RTC_EXTI_LINE_WAKEUPTIMER_EVENT))
|
|
|
|
/**
|
|
* @brief Enable falling edge trigger on the RTC WakeUp Timer associated Exti line.
|
|
* @retval None
|
|
*/
|
|
#define __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_FALLING_EDGE() (EXTI->FTSR1 |= RTC_EXTI_LINE_WAKEUPTIMER_EVENT)
|
|
|
|
/**
|
|
* @brief Disable falling edge trigger on the RTC WakeUp Timer associated Exti line.
|
|
* @retval None
|
|
*/
|
|
#define __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_FALLING_EDGE() (EXTI->FTSR1 &= ~(RTC_EXTI_LINE_WAKEUPTIMER_EVENT))
|
|
|
|
/**
|
|
* @brief Enable rising edge trigger on the RTC WakeUp Timer associated Exti line.
|
|
* @retval None
|
|
*/
|
|
#define __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_RISING_EDGE() (EXTI->RTSR1 |= RTC_EXTI_LINE_WAKEUPTIMER_EVENT)
|
|
|
|
/**
|
|
* @brief Disable rising edge trigger on the RTC WakeUp Timer associated Exti line.
|
|
* @retval None
|
|
*/
|
|
#define __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_RISING_EDGE() (EXTI->RTSR1 &= ~(RTC_EXTI_LINE_WAKEUPTIMER_EVENT))
|
|
|
|
/**
|
|
* @brief Enable rising & falling edge trigger on the RTC WakeUp Timer associated Exti line.
|
|
* @retval None
|
|
*/
|
|
#define __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_RISING_FALLING_EDGE() do { \
|
|
__HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_RISING_EDGE(); \
|
|
__HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_FALLING_EDGE(); \
|
|
} while(0)
|
|
|
|
/**
|
|
* @brief Disable rising & falling edge trigger on the RTC WakeUp Timer associated Exti line.
|
|
* This parameter can be:
|
|
* @retval None
|
|
*/
|
|
#define __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_RISING_FALLING_EDGE() do { \
|
|
__HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_RISING_EDGE(); \
|
|
__HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_FALLING_EDGE(); \
|
|
} while(0)
|
|
|
|
/**
|
|
* @brief Check whether the RTC WakeUp Timer associated Exti line interrupt flag is set or not.
|
|
* @retval Line Status.
|
|
*/
|
|
#define __HAL_RTC_WAKEUPTIMER_EXTI_GET_FLAG() (EXTI->PR1 & RTC_EXTI_LINE_WAKEUPTIMER_EVENT)
|
|
|
|
/**
|
|
* @brief Clear the RTC WakeUp Timer associated Exti line flag.
|
|
* @retval None
|
|
*/
|
|
#define __HAL_RTC_WAKEUPTIMER_EXTI_CLEAR_FLAG() (EXTI->PR1 = RTC_EXTI_LINE_WAKEUPTIMER_EVENT)
|
|
|
|
/**
|
|
* @brief Generate a Software interrupt on the RTC WakeUp Timer associated Exti line.
|
|
* @retval None
|
|
*/
|
|
#define __HAL_RTC_WAKEUPTIMER_EXTI_GENERATE_SWIT() (EXTI->SWIER1 |= RTC_EXTI_LINE_WAKEUPTIMER_EVENT)
|
|
|
|
/**
|
|
* @brief Enable interrupt on the RTC Tamper and Timestamp associated Exti line.
|
|
* @retval None
|
|
*/
|
|
#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_IT() (EXTI->IMR1 |= RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT)
|
|
|
|
/**
|
|
* @brief Disable interrupt on the RTC Tamper and Timestamp associated Exti line.
|
|
* @retval None
|
|
*/
|
|
#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_IT() (EXTI->IMR1 &= ~(RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT))
|
|
|
|
/**
|
|
* @brief Enable event on the RTC Tamper and Timestamp associated Exti line.
|
|
* @retval None
|
|
*/
|
|
#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_EVENT() (EXTI->EMR1 |= RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT)
|
|
|
|
/**
|
|
* @brief Disable event on the RTC Tamper and Timestamp associated Exti line.
|
|
* @retval None
|
|
*/
|
|
#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_EVENT() (EXTI->EMR1 &= ~(RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT))
|
|
|
|
/**
|
|
* @brief Enable falling edge trigger on the RTC Tamper and Timestamp associated Exti line.
|
|
* @retval None
|
|
*/
|
|
#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_FALLING_EDGE() (EXTI->FTSR1 |= RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT)
|
|
|
|
/**
|
|
* @brief Disable falling edge trigger on the RTC Tamper and Timestamp associated Exti line.
|
|
* @retval None
|
|
*/
|
|
#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_FALLING_EDGE() (EXTI->FTSR1 &= ~(RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT))
|
|
|
|
/**
|
|
* @brief Enable rising edge trigger on the RTC Tamper and Timestamp associated Exti line.
|
|
* @retval None
|
|
*/
|
|
#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_RISING_EDGE() (EXTI->RTSR1 |= RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT)
|
|
|
|
/**
|
|
* @brief Disable rising edge trigger on the RTC Tamper and Timestamp associated Exti line.
|
|
* @retval None
|
|
*/
|
|
#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_RISING_EDGE() (EXTI->RTSR1 &= ~(RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT))
|
|
|
|
/**
|
|
* @brief Enable rising & falling edge trigger on the RTC Tamper and Timestamp associated Exti line.
|
|
* @retval None
|
|
*/
|
|
#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_RISING_FALLING_EDGE() do { \
|
|
__HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_RISING_EDGE(); \
|
|
__HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_FALLING_EDGE(); \
|
|
} while(0)
|
|
|
|
/**
|
|
* @brief Disable rising & falling edge trigger on the RTC Tamper and Timestamp associated Exti line.
|
|
* This parameter can be:
|
|
* @retval None
|
|
*/
|
|
#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_RISING_FALLING_EDGE() do { \
|
|
__HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_RISING_EDGE(); \
|
|
__HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_FALLING_EDGE(); \
|
|
} while(0)
|
|
|
|
/**
|
|
* @brief Check whether the RTC Tamper and Timestamp associated Exti line interrupt flag is set or not.
|
|
* @retval Line Status.
|
|
*/
|
|
#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_GET_FLAG() (EXTI->PR1 & RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT)
|
|
|
|
/**
|
|
* @brief Clear the RTC Tamper and Timestamp associated Exti line flag.
|
|
* @retval None
|
|
*/
|
|
#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_CLEAR_FLAG() (EXTI->PR1 = RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT)
|
|
|
|
/**
|
|
* @brief Generate a Software interrupt on the RTC Tamper and Timestamp associated Exti line
|
|
* @retval None
|
|
*/
|
|
#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_GENERATE_SWIT() (EXTI->SWIER1 |= RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT)
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/* Exported functions --------------------------------------------------------*/
|
|
/** @addtogroup RTCEx_Exported_Functions
|
|
* @{
|
|
*/
|
|
|
|
/* RTC TimeStamp and Tamper functions *****************************************/
|
|
/** @addtogroup RTCEx_Exported_Functions_Group1
|
|
* @{
|
|
*/
|
|
HAL_StatusTypeDef HAL_RTCEx_SetTimeStamp(RTC_HandleTypeDef *hrtc, uint32_t TimeStampEdge, uint32_t RTC_TimeStampPin);
|
|
HAL_StatusTypeDef HAL_RTCEx_SetTimeStamp_IT(RTC_HandleTypeDef *hrtc, uint32_t TimeStampEdge, uint32_t RTC_TimeStampPin);
|
|
HAL_StatusTypeDef HAL_RTCEx_DeactivateTimeStamp(RTC_HandleTypeDef *hrtc);
|
|
HAL_StatusTypeDef HAL_RTCEx_SetInternalTimeStamp(RTC_HandleTypeDef *hrtc);
|
|
HAL_StatusTypeDef HAL_RTCEx_DeactivateInternalTimeStamp(RTC_HandleTypeDef *hrtc);
|
|
HAL_StatusTypeDef HAL_RTCEx_GetTimeStamp(RTC_HandleTypeDef *hrtc, RTC_TimeTypeDef *sTimeStamp, RTC_DateTypeDef *sTimeStampDate, uint32_t Format);
|
|
|
|
HAL_StatusTypeDef HAL_RTCEx_SetTamper(RTC_HandleTypeDef *hrtc, RTC_TamperTypeDef* sTamper);
|
|
HAL_StatusTypeDef HAL_RTCEx_SetTamper_IT(RTC_HandleTypeDef *hrtc, RTC_TamperTypeDef* sTamper);
|
|
HAL_StatusTypeDef HAL_RTCEx_DeactivateTamper(RTC_HandleTypeDef *hrtc, uint32_t Tamper);
|
|
void HAL_RTCEx_TamperTimeStampIRQHandler(RTC_HandleTypeDef *hrtc);
|
|
|
|
#if defined(RTC_TAMPER1_SUPPORT)
|
|
void HAL_RTCEx_Tamper1EventCallback(RTC_HandleTypeDef *hrtc);
|
|
#endif /* RTC_TAMPER1_SUPPORT */
|
|
void HAL_RTCEx_Tamper2EventCallback(RTC_HandleTypeDef *hrtc);
|
|
#if defined(RTC_TAMPER3_SUPPORT)
|
|
void HAL_RTCEx_Tamper3EventCallback(RTC_HandleTypeDef *hrtc);
|
|
#endif /* RTC_TAMPER3_SUPPORT */
|
|
void HAL_RTCEx_TimeStampEventCallback(RTC_HandleTypeDef *hrtc);
|
|
HAL_StatusTypeDef HAL_RTCEx_PollForTimeStampEvent(RTC_HandleTypeDef *hrtc, uint32_t Timeout);
|
|
#if defined(RTC_TAMPER1_SUPPORT)
|
|
HAL_StatusTypeDef HAL_RTCEx_PollForTamper1Event(RTC_HandleTypeDef *hrtc, uint32_t Timeout);
|
|
#endif /* RTC_TAMPER1_SUPPORT */
|
|
HAL_StatusTypeDef HAL_RTCEx_PollForTamper2Event(RTC_HandleTypeDef *hrtc, uint32_t Timeout);
|
|
#if defined(RTC_TAMPER3_SUPPORT)
|
|
HAL_StatusTypeDef HAL_RTCEx_PollForTamper3Event(RTC_HandleTypeDef *hrtc, uint32_t Timeout);
|
|
#endif /* RTC_TAMPER3_SUPPORT */
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/* RTC Wake-up functions ******************************************************/
|
|
/** @addtogroup RTCEx_Exported_Functions_Group2
|
|
* @{
|
|
*/
|
|
HAL_StatusTypeDef HAL_RTCEx_SetWakeUpTimer(RTC_HandleTypeDef *hrtc, uint32_t WakeUpCounter, uint32_t WakeUpClock);
|
|
HAL_StatusTypeDef HAL_RTCEx_SetWakeUpTimer_IT(RTC_HandleTypeDef *hrtc, uint32_t WakeUpCounter, uint32_t WakeUpClock);
|
|
uint32_t HAL_RTCEx_DeactivateWakeUpTimer(RTC_HandleTypeDef *hrtc);
|
|
uint32_t HAL_RTCEx_GetWakeUpTimer(RTC_HandleTypeDef *hrtc);
|
|
void HAL_RTCEx_WakeUpTimerIRQHandler(RTC_HandleTypeDef *hrtc);
|
|
void HAL_RTCEx_WakeUpTimerEventCallback(RTC_HandleTypeDef *hrtc);
|
|
HAL_StatusTypeDef HAL_RTCEx_PollForWakeUpTimerEvent(RTC_HandleTypeDef *hrtc, uint32_t Timeout);
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/* Extended Control functions ************************************************/
|
|
/** @addtogroup RTCEx_Exported_Functions_Group3
|
|
* @{
|
|
*/
|
|
void HAL_RTCEx_BKUPWrite(RTC_HandleTypeDef *hrtc, uint32_t BackupRegister, uint32_t Data);
|
|
uint32_t HAL_RTCEx_BKUPRead(RTC_HandleTypeDef *hrtc, uint32_t BackupRegister);
|
|
|
|
HAL_StatusTypeDef HAL_RTCEx_SetSmoothCalib(RTC_HandleTypeDef *hrtc, uint32_t SmoothCalibPeriod, uint32_t SmoothCalibPlusPulses, uint32_t SmoothCalibMinusPulsesValue);
|
|
HAL_StatusTypeDef HAL_RTCEx_SetSynchroShift(RTC_HandleTypeDef *hrtc, uint32_t ShiftAdd1S, uint32_t ShiftSubFS);
|
|
HAL_StatusTypeDef HAL_RTCEx_SetCalibrationOutPut(RTC_HandleTypeDef *hrtc, uint32_t CalibOutput);
|
|
HAL_StatusTypeDef HAL_RTCEx_DeactivateCalibrationOutPut(RTC_HandleTypeDef *hrtc);
|
|
HAL_StatusTypeDef HAL_RTCEx_SetRefClock(RTC_HandleTypeDef *hrtc);
|
|
HAL_StatusTypeDef HAL_RTCEx_DeactivateRefClock(RTC_HandleTypeDef *hrtc);
|
|
HAL_StatusTypeDef HAL_RTCEx_EnableBypassShadow(RTC_HandleTypeDef *hrtc);
|
|
HAL_StatusTypeDef HAL_RTCEx_DisableBypassShadow(RTC_HandleTypeDef *hrtc);
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/* Extended RTC features functions *******************************************/
|
|
/** @addtogroup RTCEx_Exported_Functions_Group4
|
|
* @{
|
|
*/
|
|
void HAL_RTCEx_AlarmBEventCallback(RTC_HandleTypeDef *hrtc);
|
|
HAL_StatusTypeDef HAL_RTCEx_PollForAlarmBEvent(RTC_HandleTypeDef *hrtc, uint32_t Timeout);
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/* Private types -------------------------------------------------------------*/
|
|
/* Private variables ---------------------------------------------------------*/
|
|
/* Private constants ---------------------------------------------------------*/
|
|
/** @defgroup RTCEx_Private_Constants RTCEx Private Constants
|
|
* @{
|
|
*/
|
|
#define RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT ((uint32_t)0x00080000) /*!< External interrupt line 19 Connected to the RTC Tamper and Time Stamp events */
|
|
#define RTC_EXTI_LINE_WAKEUPTIMER_EVENT ((uint32_t)0x00100000) /*!< External interrupt line 20 Connected to the RTC Wakeup event */
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/* Private macros ------------------------------------------------------------*/
|
|
/** @defgroup RTCEx_Private_Macros RTCEx Private Macros
|
|
* @{
|
|
*/
|
|
|
|
/** @defgroup RTCEx_IS_RTC_Definitions Private macros to check input parameters
|
|
* @{
|
|
*/
|
|
|
|
#define IS_RTC_OUTPUT(OUTPUT) (((OUTPUT) == RTC_OUTPUT_DISABLE) || \
|
|
((OUTPUT) == RTC_OUTPUT_ALARMA) || \
|
|
((OUTPUT) == RTC_OUTPUT_ALARMB) || \
|
|
((OUTPUT) == RTC_OUTPUT_WAKEUP))
|
|
|
|
#define IS_RTC_BKP(BKP) ((BKP) < (uint32_t) RTC_BKP_NUMBER)
|
|
|
|
#define IS_TIMESTAMP_EDGE(EDGE) (((EDGE) == RTC_TIMESTAMPEDGE_RISING) || \
|
|
((EDGE) == RTC_TIMESTAMPEDGE_FALLING))
|
|
|
|
#define IS_RTC_TAMPER(TAMPER) ((((TAMPER) & (uint32_t)0xFFFFFFD6) == 0x00) && ((TAMPER) != (uint32_t)RESET))
|
|
|
|
#define IS_RTC_TAMPER_INTERRUPT(INTERRUPT) ((((INTERRUPT) & (uint32_t)0xFFB6FFFB) == 0x00) && ((INTERRUPT) != (uint32_t)RESET))
|
|
|
|
#define IS_RTC_TIMESTAMP_PIN(PIN) (((PIN) == RTC_TIMESTAMPPIN_DEFAULT))
|
|
|
|
#define IS_RTC_TAMPER_TRIGGER(TRIGGER) (((TRIGGER) == RTC_TAMPERTRIGGER_RISINGEDGE) || \
|
|
((TRIGGER) == RTC_TAMPERTRIGGER_FALLINGEDGE) || \
|
|
((TRIGGER) == RTC_TAMPERTRIGGER_LOWLEVEL) || \
|
|
((TRIGGER) == RTC_TAMPERTRIGGER_HIGHLEVEL))
|
|
|
|
#define IS_RTC_TAMPER_ERASE_MODE(MODE) (((MODE) == RTC_TAMPER_ERASE_BACKUP_ENABLE) || \
|
|
((MODE) == RTC_TAMPER_ERASE_BACKUP_DISABLE))
|
|
|
|
#define IS_RTC_TAMPER_MASKFLAG_STATE(STATE) (((STATE) == RTC_TAMPERMASK_FLAG_ENABLE) || \
|
|
((STATE) == RTC_TAMPERMASK_FLAG_DISABLE))
|
|
|
|
#define IS_RTC_TAMPER_FILTER(FILTER) (((FILTER) == RTC_TAMPERFILTER_DISABLE) || \
|
|
((FILTER) == RTC_TAMPERFILTER_2SAMPLE) || \
|
|
((FILTER) == RTC_TAMPERFILTER_4SAMPLE) || \
|
|
((FILTER) == RTC_TAMPERFILTER_8SAMPLE))
|
|
|
|
#define IS_RTC_TAMPER_SAMPLING_FREQ(FREQ) (((FREQ) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV32768)|| \
|
|
((FREQ) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV16384)|| \
|
|
((FREQ) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV8192) || \
|
|
((FREQ) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV4096) || \
|
|
((FREQ) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV2048) || \
|
|
((FREQ) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV1024) || \
|
|
((FREQ) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV512) || \
|
|
((FREQ) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV256))
|
|
|
|
#define IS_RTC_TAMPER_PRECHARGE_DURATION(DURATION) (((DURATION) == RTC_TAMPERPRECHARGEDURATION_1RTCCLK) || \
|
|
((DURATION) == RTC_TAMPERPRECHARGEDURATION_2RTCCLK) || \
|
|
((DURATION) == RTC_TAMPERPRECHARGEDURATION_4RTCCLK) || \
|
|
((DURATION) == RTC_TAMPERPRECHARGEDURATION_8RTCCLK))
|
|
|
|
#define IS_RTC_TAMPER_TIMESTAMPONTAMPER_DETECTION(DETECTION) (((DETECTION) == RTC_TIMESTAMPONTAMPERDETECTION_ENABLE) || \
|
|
((DETECTION) == RTC_TIMESTAMPONTAMPERDETECTION_DISABLE))
|
|
|
|
#define IS_RTC_TAMPER_PULLUP_STATE(STATE) (((STATE) == RTC_TAMPER_PULLUP_ENABLE) || \
|
|
((STATE) == RTC_TAMPER_PULLUP_DISABLE))
|
|
|
|
#define IS_RTC_WAKEUP_CLOCK(CLOCK) (((CLOCK) == RTC_WAKEUPCLOCK_RTCCLK_DIV16) || \
|
|
((CLOCK) == RTC_WAKEUPCLOCK_RTCCLK_DIV8) || \
|
|
((CLOCK) == RTC_WAKEUPCLOCK_RTCCLK_DIV4) || \
|
|
((CLOCK) == RTC_WAKEUPCLOCK_RTCCLK_DIV2) || \
|
|
((CLOCK) == RTC_WAKEUPCLOCK_CK_SPRE_16BITS) || \
|
|
((CLOCK) == RTC_WAKEUPCLOCK_CK_SPRE_17BITS))
|
|
|
|
#define IS_RTC_WAKEUP_COUNTER(COUNTER) ((COUNTER) <= 0xFFFF)
|
|
|
|
#define IS_RTC_SMOOTH_CALIB_PERIOD(PERIOD) (((PERIOD) == RTC_SMOOTHCALIB_PERIOD_32SEC) || \
|
|
((PERIOD) == RTC_SMOOTHCALIB_PERIOD_16SEC) || \
|
|
((PERIOD) == RTC_SMOOTHCALIB_PERIOD_8SEC))
|
|
|
|
#define IS_RTC_SMOOTH_CALIB_PLUS(PLUS) (((PLUS) == RTC_SMOOTHCALIB_PLUSPULSES_SET) || \
|
|
((PLUS) == RTC_SMOOTHCALIB_PLUSPULSES_RESET))
|
|
|
|
#define IS_RTC_SMOOTH_CALIB_MINUS(VALUE) ((VALUE) <= 0x000001FF)
|
|
|
|
#define IS_RTC_SHIFT_ADD1S(SEL) (((SEL) == RTC_SHIFTADD1S_RESET) || \
|
|
((SEL) == RTC_SHIFTADD1S_SET))
|
|
|
|
#define IS_RTC_SHIFT_SUBFS(FS) ((FS) <= 0x00007FFF)
|
|
|
|
#define IS_RTC_CALIB_OUTPUT(OUTPUT) (((OUTPUT) == RTC_CALIBOUTPUT_512HZ) || \
|
|
((OUTPUT) == RTC_CALIBOUTPUT_1HZ))
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
#ifdef __cplusplus
|
|
}
|
|
#endif
|
|
|
|
#endif /* __STM32L4xx_HAL_RTC_EX_H */
|
|
|
|
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|