397 lines
21 KiB
C
397 lines
21 KiB
C
/**
|
|
******************************************************************************
|
|
* @file stm32l4xx_hal_tim_ex.h
|
|
* @author MCD Application Team
|
|
* @version V1.3.0
|
|
* @date 29-January-2016
|
|
* @brief Header file of TIM HAL Extended module.
|
|
******************************************************************************
|
|
* @attention
|
|
*
|
|
* <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without modification,
|
|
* are permitted provided that the following conditions are met:
|
|
* 1. Redistributions of source code must retain the above copyright notice,
|
|
* this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright notice,
|
|
* this list of conditions and the following disclaimer in the documentation
|
|
* and/or other materials provided with the distribution.
|
|
* 3. Neither the name of STMicroelectronics nor the names of its contributors
|
|
* may be used to endorse or promote products derived from this software
|
|
* without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
|
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
|
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
|
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
|
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
|
|
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
|
|
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
|
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
*
|
|
******************************************************************************
|
|
*/
|
|
|
|
/* Define to prevent recursive inclusion -------------------------------------*/
|
|
#ifndef __STM32L4xx_HAL_TIM_EX_H
|
|
#define __STM32L4xx_HAL_TIM_EX_H
|
|
|
|
#ifdef __cplusplus
|
|
extern "C" {
|
|
#endif
|
|
|
|
/* Includes ------------------------------------------------------------------*/
|
|
#include "stm32l4xx_hal_def.h"
|
|
|
|
/** @addtogroup STM32L4xx_HAL_Driver
|
|
* @{
|
|
*/
|
|
|
|
/** @addtogroup TIMEx
|
|
* @{
|
|
*/
|
|
|
|
/* Exported types ------------------------------------------------------------*/
|
|
/** @defgroup TIMEx_Exported_Types TIM Extended Exported Types
|
|
* @{
|
|
*/
|
|
|
|
/**
|
|
* @brief TIM Hall sensor Configuration Structure definition
|
|
*/
|
|
|
|
typedef struct
|
|
{
|
|
|
|
uint32_t IC1Polarity; /*!< Specifies the active edge of the input signal.
|
|
This parameter can be a value of @ref TIM_Input_Capture_Polarity */
|
|
|
|
uint32_t IC1Prescaler; /*!< Specifies the Input Capture Prescaler.
|
|
This parameter can be a value of @ref TIM_Input_Capture_Prescaler */
|
|
|
|
uint32_t IC1Filter; /*!< Specifies the input capture filter.
|
|
This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */
|
|
|
|
uint32_t Commutation_Delay; /*!< Specifies the pulse value to be loaded into the Capture Compare Register.
|
|
This parameter can be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF */
|
|
} TIM_HallSensor_InitTypeDef;
|
|
|
|
/**
|
|
* @brief TIM Break/Break2 input configuration
|
|
*/
|
|
typedef struct {
|
|
uint32_t Source; /*!< Specifies the source of the timer break input.
|
|
This parameter can be a value of @ref TIMEx_Break_Input_Source */
|
|
uint32_t Enable; /*!< Specifies whether or not the break input source is enabled.
|
|
This parameter can be a value of @ref TIMEx_Break_Input_Source_Enable */
|
|
uint32_t Polarity; /*!< Specifies the break input source polarity.
|
|
This parameter can be a value of @ref TIMEx_Break_Input_Source_Polarity
|
|
Not relevant when analog watchdog output of the DFSDM used as break input source */
|
|
} TIMEx_BreakInputConfigTypeDef;
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
/* End of exported types -----------------------------------------------------*/
|
|
|
|
/* Exported constants --------------------------------------------------------*/
|
|
/** @defgroup TIMEx_Exported_Constants TIM Extended Exported Constants
|
|
* @{
|
|
*/
|
|
|
|
/** @defgroup TIMEx_Remap TIM Extended Remapping
|
|
* @{
|
|
*/
|
|
#define TIM_TIM1_ETR_ADC1_NONE ((uint32_t)(0x00000000)) /* !< TIM1_ETR is not connected to any AWD (analog watchdog)*/
|
|
#define TIM_TIM1_ETR_ADC1_AWD1 (TIM1_OR1_ETR_ADC1_RMP_0) /* !< TIM1_ETR is connected to ADC1 AWD1 */
|
|
#define TIM_TIM1_ETR_ADC1_AWD2 (TIM1_OR1_ETR_ADC1_RMP_1) /* !< TIM1_ETR is connected to ADC1 AWD2 */
|
|
#define TIM_TIM1_ETR_ADC1_AWD3 (TIM1_OR1_ETR_ADC1_RMP_1 | TIM1_OR1_ETR_ADC1_RMP_0) /* !< TIM1_ETR is connected to ADC1 AWD3 */
|
|
#define TIM_TIM1_ETR_ADC3_NONE ((uint32_t)(0x00000000)) /* !< TIM1_ETR is not connected to any AWD (analog watchdog)*/
|
|
#define TIM_TIM1_ETR_ADC3_AWD1 (TIM1_OR1_ETR_ADC3_RMP_0) /* !< TIM1_ETR is connected to ADC3 AWD1 */
|
|
#define TIM_TIM1_ETR_ADC3_AWD2 (TIM1_OR1_ETR_ADC3_RMP_1) /* !< TIM1_ETR is connected to ADC3 AWD2 */
|
|
#define TIM_TIM1_ETR_ADC3_AWD3 (TIM1_OR1_ETR_ADC3_RMP_1 | TIM1_OR1_ETR_ADC3_RMP_0) /* !< TIM1_ETR is connected to ADC3 AWD3 */
|
|
#define TIM_TIM1_TI1_GPIO ((uint32_t)(0x00000000)) /* !< TIM1 TI1 is connected to GPIO */
|
|
#define TIM_TIM1_TI1_COMP1 (TIM1_OR1_TI1_RMP) /* !< TIM1 TI1 is connected to COMP1 */
|
|
#define TIM_TIM1_ETR_COMP1 (TIM1_OR2_ETRSEL_0) /* !< TIM1_ETR is connected to COMP1 output */
|
|
#define TIM_TIM1_ETR_COMP2 (TIM1_OR2_ETRSEL_1) /* !< TIM1_ETR is connected to COMP2 output */
|
|
#define TIM_TIM2_ITR1_TIM8_TRGO ((uint32_t)(0x00000000)) /* !< TIM2_ITR1 is connected to TIM8_TRGO */
|
|
#define TIM_TIM2_ITR1_OTG_FS_SOF (TIM2_OR1_ITR1_RMP) /* !< TIM2_ITR1 is connected to OTG_FS SOF */
|
|
#define TIM_TIM2_ETR_GPIO ((uint32_t)(0x00000000)) /* !< TIM2_ETR is connected to GPIO */
|
|
#define TIM_TIM2_ETR_LSE (TIM2_OR1_ETR1_RMP) /* !< TIM2_ETR is connected to LSE */
|
|
#define TIM_TIM2_ETR_COMP1 (TIM2_OR2_ETRSEL_0) /* !< TIM2_ETR is connected to COMP1 output */
|
|
#define TIM_TIM2_ETR_COMP2 (TIM2_OR2_ETRSEL_1) /* !< TIM2_ETR is connected to COMP2 output */
|
|
#define TIM_TIM2_TI4_GPIO ((uint32_t)(0x00000000)) /* !< TIM2 TI4 is connected to GPIO */
|
|
#define TIM_TIM2_TI4_COMP1 (TIM2_OR1_TI4_RMP_0) /* !< TIM2 TI4 is connected to COMP1 output */
|
|
#define TIM_TIM2_TI4_COMP2 (TIM2_OR1_TI4_RMP_1) /* !< TIM2 TI4 is connected to COMP2 output */
|
|
#define TIM_TIM2_TI4_COMP1_COMP2 (TIM2_OR1_TI4_RMP_1| TIM2_OR1_TI4_RMP_0) /* !< TIM2 TI4 is connected to logical OR between COMP1 and COMP2 output2 */
|
|
#define TIM_TIM3_TI1_GPIO ((uint32_t)(0x00000000)) /* !< TIM3 TI1 is connected to GPIO */
|
|
#define TIM_TIM3_TI1_COMP1 (TIM3_OR1_TI1_RMP_0) /* !< TIM3 TI1 is connected to COMP1 output */
|
|
#define TIM_TIM3_TI1_COMP2 (TIM3_OR1_TI1_RMP_1) /* !< TIM3 TI1 is connected to COMP2 output */
|
|
#define TIM_TIM3_TI1_COMP1_COMP2 (TIM3_OR1_TI1_RMP_1 | TIM3_OR1_TI1_RMP_0) /* !< TIM3 TI1 is connected to logical OR between COMP1 and COMP2 output2 */
|
|
#define TIM_TIM3_ETR_GPIO ((uint32_t)(0x00000000)) /* !< TIM3_ETR is connected to GPIO */
|
|
#define TIM_TIM3_ETR_COMP1 (TIM3_OR2_ETRSEL_0) /* !< TIM3_ETR is connected to COMP1 output */
|
|
#define TIM_TIM8_ETR_ADC2_NONE ((uint32_t)(0x00000000)) /* !< TIM8_ETR is not connected to any AWD (analog watchdog)*/
|
|
#define TIM_TIM8_ETR_ADC2_AWD1 (TIM8_OR1_ETR_ADC2_RMP_0) /* !< TIM8_ETR is connected to ADC2 AWD1 */
|
|
#define TIM_TIM8_ETR_ADC2_AWD2 (TIM8_OR1_ETR_ADC2_RMP_1) /* !< TIM8_ETR is connected to ADC2 AWD2 */
|
|
#define TIM_TIM8_ETR_ADC2_AWD3 (TIM8_OR1_ETR_ADC2_RMP_1 | TIM8_OR1_ETR_ADC2_RMP_0) /* !< TIM8_ETR is connected to ADC2 AWD3 */
|
|
#define TIM_TIM8_ETR_ADC3_NONE ((uint32_t)(0x00000000)) /* !< TIM8_ETR is not connected to any AWD (analog watchdog)*/
|
|
#define TIM_TIM8_ETR_ADC3_AWD1 (TIM8_OR1_ETR_ADC3_RMP_0) /* !< TIM8_ETR is connected to ADC3 AWD1 */
|
|
#define TIM_TIM8_ETR_ADC3_AWD2 (TIM8_OR1_ETR_ADC3_RMP_1) /* !< TIM8_ETR is connected to ADC3 AWD2 */
|
|
#define TIM_TIM8_ETR_ADC3_AWD3 (TIM8_OR1_ETR_ADC3_RMP_1 | TIM8_OR1_ETR_ADC3_RMP_0) /* !< TIM8_ETR is connected to ADC3 AWD3 */
|
|
#define TIM_TIM8_TI1_GPIO ((uint32_t)(0x00000000)) /* !< TIM8 TI1 is connected to GPIO */
|
|
#define TIM_TIM8_TI1_COMP2 (TIM8_OR1_TI1_RMP) /* !< TIM8 TI1 is connected to COMP1 */
|
|
#define TIM_TIM8_ETR_COMP1 (TIM8_OR2_ETRSEL_0) /* !< TIM8_ETR is connected to COMP1 output */
|
|
#define TIM_TIM8_ETR_COMP2 (TIM8_OR2_ETRSEL_1) /* !< TIM8_ETR is connected to COMP2 output */
|
|
#define TIM_TIM15_TI1_GPIO ((uint32_t)(0x00000000)) /* !< TIM15 TI1 is connected to GPIO */
|
|
#define TIM_TIM15_TI1_LSE (TIM15_OR1_TI1_RMP) /* !< TIM15 TI1 is connected to LSE */
|
|
#define TIM_TIM15_ENCODERMODE_NONE ((uint32_t)(0x00000000)) /* !< No redirection */
|
|
#define TIM_TIM15_ENCODERMODE_TIM2 (TIM15_OR1_ENCODER_MODE_0) /* !< TIM2 IC1 and TIM2 IC2 are connected to TIM15 IC1 and TIM15 IC2 respectively */
|
|
#define TIM_TIM15_ENCODERMODE_TIM3 (TIM15_OR1_ENCODER_MODE_1) /* !< TIM3 IC1 and TIM3 IC2 are connected to TIM15 IC1 and TIM15 IC2 respectively */
|
|
#define TIM_TIM15_ENCODERMODE_TIM4 (TIM15_OR1_ENCODER_MODE_1 | TIM15_OR1_ENCODER_MODE_0) /* !< TIM4 IC1 and TIM4 IC2 are connected to TIM15 IC1 and TIM15 IC2 respectively */
|
|
#define TIM_TIM16_TI1_GPIO ((uint32_t)(0x00000000)) /* !< TIM16 TI1 is connected to GPIO */
|
|
#define TIM_TIM16_TI1_LSI (TIM16_OR1_TI1_RMP_0) /* !< TIM16 TI1 is connected to LSI */
|
|
#define TIM_TIM16_TI1_LSE (TIM16_OR1_TI1_RMP_1) /* !< TIM16 TI1 is connected to LSE */
|
|
#define TIM_TIM16_TI1_RTC (TIM16_OR1_TI1_RMP_1 | TIM16_OR1_TI1_RMP_0) /* !< TIM16 TI1 is connected to RTC wakeup interrupt */
|
|
#define TIM_TIM17_TI1_GPIO ((uint32_t)(0x00000000)) /* !< TIM17 TI1 is connected to GPIO */
|
|
#define TIM_TIM17_TI1_MSI (TIM17_OR1_TI1_RMP_0) /* !< TIM17 TI1 is connected to MSI */
|
|
#define TIM_TIM17_TI1_HSE_32 (TIM17_OR1_TI1_RMP_1) /* !< TIM17 TI1 is connected to HSE div 32 */
|
|
#define TIM_TIM17_TI1_MCO (TIM17_OR1_TI1_RMP_1 | TIM17_OR1_TI1_RMP_0) /* !< TIM17 TI1 is connected to MCO */
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup TIMEx_Break_Input TIM Extended Break input
|
|
* @{
|
|
*/
|
|
#define TIM_BREAKINPUT_BRK ((uint32_t)(0x00000001)) /* !< Timer break input */
|
|
#define TIM_BREAKINPUT_BRK2 ((uint32_t)(0x00000002)) /* !< Timer break2 input */
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup TIMEx_Break_Input_Source TIM Extended Break input source
|
|
* @{
|
|
*/
|
|
#define TIM_BREAKINPUTSOURCE_BKIN ((uint32_t)(0x00000001)) /* !< An external source (GPIO) is connected to the BKIN pin */
|
|
#define TIM_BREAKINPUTSOURCE_COMP1 ((uint32_t)(0x00000002)) /* !< The COMP1 output is connected to the break input */
|
|
#define TIM_BREAKINPUTSOURCE_COMP2 ((uint32_t)(0x00000004)) /* !< The COMP2 output is connected to the break input */
|
|
#define TIM_BREAKINPUTSOURCE_DFSDM ((uint32_t)(0x00000008)) /* !< The analog watchdog output of the DFSDM peripheral is connected to the break input */
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup TIMEx_Break_Input_Source_Enable TIM Extended Break input source enabling
|
|
* @{
|
|
*/
|
|
#define TIM_BREAKINPUTSOURCE_DISABLE ((uint32_t)(0x00000000)) /* !< Break input source is disabled */
|
|
#define TIM_BREAKINPUTSOURCE_ENABLE ((uint32_t)(0x00000001)) /* !< Break input source is enabled */
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup TIMEx_Break_Input_Source_Polarity TIM Extended Break input polarity
|
|
* @{
|
|
*/
|
|
#define TIM_BREAKINPUTSOURCE_POLARITY_LOW ((uint32_t)(0x00000001)) /* !< Break input source is active low */
|
|
#define TIM_BREAKINPUTSOURCE_POLARITY_HIGH ((uint32_t)(0x00000000)) /* !< Break input source is active_high */
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
/* End of exported constants -------------------------------------------------*/
|
|
|
|
/* Exported macro ------------------------------------------------------------*/
|
|
/** @defgroup TIMEx_Exported_Macros TIM Extended Exported Macros
|
|
* @{
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
/* End of exported macro -----------------------------------------------------*/
|
|
|
|
/* Private macro -------------------------------------------------------------*/
|
|
/** @defgroup TIMEx_Private_Macros TIM Extended Private Macros
|
|
* @{
|
|
*/
|
|
#define IS_TIM_REMAP(__REMAP__) (((__REMAP__) <= (uint32_t)0x0001C01F))
|
|
|
|
#define IS_TIM_BREAKINPUT(__BREAKINPUT__) (((__BREAKINPUT__) == TIM_BREAKINPUT_BRK) || \
|
|
((__BREAKINPUT__) == TIM_BREAKINPUT_BRK2))
|
|
|
|
#define IS_TIM_BREAKINPUTSOURCE(__SOURCE__) (((__SOURCE__) == TIM_BREAKINPUTSOURCE_BKIN) || \
|
|
((__SOURCE__) == TIM_BREAKINPUTSOURCE_COMP1) || \
|
|
((__SOURCE__) == TIM_BREAKINPUTSOURCE_COMP2) || \
|
|
((__SOURCE__) == TIM_BREAKINPUTSOURCE_DFSDM))
|
|
|
|
#define IS_TIM_BREAKINPUTSOURCE_STATE(__STATE__) (((__STATE__) == TIM_BREAKINPUTSOURCE_DISABLE) || \
|
|
((__STATE__) == TIM_BREAKINPUTSOURCE_ENABLE))
|
|
|
|
#define IS_TIM_BREAKINPUTSOURCE_POLARITY(__POLARITY__) (((__POLARITY__) == TIM_BREAKINPUTSOURCE_POLARITY_LOW) || \
|
|
((__POLARITY__) == TIM_BREAKINPUTSOURCE_POLARITY_HIGH))
|
|
/**
|
|
* @}
|
|
*/
|
|
/* End of private macro ------------------------------------------------------*/
|
|
|
|
/* Exported functions --------------------------------------------------------*/
|
|
/** @addtogroup TIMEx_Exported_Functions TIM Extended Exported Functions
|
|
* @{
|
|
*/
|
|
|
|
/** @addtogroup TIMEx_Exported_Functions_Group1 Extended Timer Hall Sensor functions
|
|
* @brief Timer Hall Sensor functions
|
|
* @{
|
|
*/
|
|
/* Timer Hall Sensor functions **********************************************/
|
|
HAL_StatusTypeDef HAL_TIMEx_HallSensor_Init(TIM_HandleTypeDef *htim, TIM_HallSensor_InitTypeDef* sConfig);
|
|
HAL_StatusTypeDef HAL_TIMEx_HallSensor_DeInit(TIM_HandleTypeDef *htim);
|
|
|
|
void HAL_TIMEx_HallSensor_MspInit(TIM_HandleTypeDef *htim);
|
|
void HAL_TIMEx_HallSensor_MspDeInit(TIM_HandleTypeDef *htim);
|
|
|
|
/* Blocking mode: Polling */
|
|
HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start(TIM_HandleTypeDef *htim);
|
|
HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop(TIM_HandleTypeDef *htim);
|
|
/* Non-Blocking mode: Interrupt */
|
|
HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start_IT(TIM_HandleTypeDef *htim);
|
|
HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop_IT(TIM_HandleTypeDef *htim);
|
|
/* Non-Blocking mode: DMA */
|
|
HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start_DMA(TIM_HandleTypeDef *htim, uint32_t *pData, uint16_t Length);
|
|
HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop_DMA(TIM_HandleTypeDef *htim);
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @addtogroup TIMEx_Exported_Functions_Group2 Extended Timer Complementary Output Compare functions
|
|
* @brief Timer Complementary Output Compare functions
|
|
* @{
|
|
*/
|
|
/* Timer Complementary Output Compare functions *****************************/
|
|
/* Blocking mode: Polling */
|
|
HAL_StatusTypeDef HAL_TIMEx_OCN_Start(TIM_HandleTypeDef *htim, uint32_t Channel);
|
|
HAL_StatusTypeDef HAL_TIMEx_OCN_Stop(TIM_HandleTypeDef *htim, uint32_t Channel);
|
|
|
|
/* Non-Blocking mode: Interrupt */
|
|
HAL_StatusTypeDef HAL_TIMEx_OCN_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
|
|
HAL_StatusTypeDef HAL_TIMEx_OCN_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
|
|
|
|
/* Non-Blocking mode: DMA */
|
|
HAL_StatusTypeDef HAL_TIMEx_OCN_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length);
|
|
HAL_StatusTypeDef HAL_TIMEx_OCN_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel);
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @addtogroup TIMEx_Exported_Functions_Group3 Extended Timer Complementary PWM functions
|
|
* @brief Timer Complementary PWM functions
|
|
* @{
|
|
*/
|
|
/* Timer Complementary PWM functions ****************************************/
|
|
/* Blocking mode: Polling */
|
|
HAL_StatusTypeDef HAL_TIMEx_PWMN_Start(TIM_HandleTypeDef *htim, uint32_t Channel);
|
|
HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop(TIM_HandleTypeDef *htim, uint32_t Channel);
|
|
|
|
/* Non-Blocking mode: Interrupt */
|
|
HAL_StatusTypeDef HAL_TIMEx_PWMN_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
|
|
HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
|
|
/* Non-Blocking mode: DMA */
|
|
HAL_StatusTypeDef HAL_TIMEx_PWMN_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length);
|
|
HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel);
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @addtogroup TIMEx_Exported_Functions_Group4 Extended Timer Complementary One Pulse functions
|
|
* @brief Timer Complementary One Pulse functions
|
|
* @{
|
|
*/
|
|
/* Timer Complementary One Pulse functions **********************************/
|
|
/* Blocking mode: Polling */
|
|
HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Start(TIM_HandleTypeDef *htim, uint32_t OutputChannel);
|
|
HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Stop(TIM_HandleTypeDef *htim, uint32_t OutputChannel);
|
|
|
|
/* Non-Blocking mode: Interrupt */
|
|
HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Start_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel);
|
|
HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Stop_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel);
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @addtogroup TIMEx_Exported_Functions_Group5 Extended Peripheral Control functions
|
|
* @brief Peripheral Control functions
|
|
* @{
|
|
*/
|
|
/* Extended Control functions ************************************************/
|
|
HAL_StatusTypeDef HAL_TIMEx_ConfigCommutationEvent(TIM_HandleTypeDef *htim, uint32_t InputTrigger, uint32_t CommutationSource);
|
|
HAL_StatusTypeDef HAL_TIMEx_ConfigCommutationEvent_IT(TIM_HandleTypeDef *htim, uint32_t InputTrigger, uint32_t CommutationSource);
|
|
HAL_StatusTypeDef HAL_TIMEx_ConfigCommutationEvent_DMA(TIM_HandleTypeDef *htim, uint32_t InputTrigger, uint32_t CommutationSource);
|
|
HAL_StatusTypeDef HAL_TIMEx_MasterConfigSynchronization(TIM_HandleTypeDef *htim, TIM_MasterConfigTypeDef * sMasterConfig);
|
|
HAL_StatusTypeDef HAL_TIMEx_ConfigBreakDeadTime(TIM_HandleTypeDef *htim, TIM_BreakDeadTimeConfigTypeDef *sBreakDeadTimeConfig);
|
|
HAL_StatusTypeDef HAL_TIMEx_ConfigBreakInput(TIM_HandleTypeDef *htim, uint32_t BreakInput, TIMEx_BreakInputConfigTypeDef *sBreakInputConfig);
|
|
HAL_StatusTypeDef HAL_TIMEx_GroupChannel5(TIM_HandleTypeDef *htim, uint32_t Channels);
|
|
HAL_StatusTypeDef HAL_TIMEx_RemapConfig(TIM_HandleTypeDef *htim, uint32_t Remap);
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @addtogroup TIMEx_Exported_Functions_Group6 Extended Callbacks functions
|
|
* @brief Extended Callbacks functions
|
|
* @{
|
|
*/
|
|
/* Extended Callback **********************************************************/
|
|
void HAL_TIMEx_CommutationCallback(TIM_HandleTypeDef *htim);
|
|
void HAL_TIMEx_BreakCallback(TIM_HandleTypeDef *htim);
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @addtogroup TIMEx_Exported_Functions_Group7 Extended Peripheral State functions
|
|
* @brief Extended Peripheral State functions
|
|
* @{
|
|
*/
|
|
/* Extended Peripheral State functions ***************************************/
|
|
HAL_TIM_StateTypeDef HAL_TIMEx_HallSensor_GetState(TIM_HandleTypeDef *htim);
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
/* End of exported functions -------------------------------------------------*/
|
|
|
|
/* Private functions----------------------------------------------------------*/
|
|
/** @defgroup TIMEx_Private_Functions TIMEx Private Functions
|
|
* @{
|
|
*/
|
|
void TIMEx_DMACommutationCplt(DMA_HandleTypeDef *hdma);
|
|
/**
|
|
* @}
|
|
*/
|
|
/* End of private functions --------------------------------------------------*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
#ifdef __cplusplus
|
|
}
|
|
#endif
|
|
|
|
|
|
#endif /* __STM32L4xx_HAL_TIM_EX_H */
|
|
|
|
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|