Add information on jumper settings.
parent
8ccfd3f6f2
commit
8320cec614
|
@ -20,9 +20,17 @@ The E407 is like the [Olimex H407](https://github.com/micropython/micropython/wi
|
||||||
###Status###
|
###Status###
|
||||||
Preliminary support is in https://github.com/markushx/micropython/tree/olimex-e407. Untested.
|
Preliminary support is in https://github.com/markushx/micropython/tree/olimex-e407. Untested.
|
||||||
|
|
||||||
|
###Jumpers###
|
||||||
|
|
||||||
|
For programming the board, the jumpers on the board need to be set as in the following picture:
|
||||||
|
![](https://github.com/markushx/micropython/blob/olimex-e407/stmhal/boards/OLIMEX_E407/doc/Olimex-Pyb-Programming.jpg)
|
||||||
|
|
||||||
###Build instructions###
|
###Build instructions###
|
||||||
Follow https://github.com/micropython/micropython/wiki/Getting-Started-STM.
|
Follow https://github.com/micropython/micropython/wiki/Getting-Started-STM.
|
||||||
|
|
||||||
cd stmhal
|
cd stmhal
|
||||||
BOARD=OLIMEX_E407 make
|
BOARD=OLIMEX_E407 make
|
||||||
dfu-util -d 0483:df11 -a 0 -D build-OLIMEX_E407/firmware.dfu
|
dfu-util -d 0483:df11 -a 0 -D build-OLIMEX_E407/firmware.dfu
|
||||||
|
|
||||||
|
###Running micropython on the board###
|
||||||
|
Change the top right jumper from the left to the right position and power up the board.
|
Loading…
Reference in New Issue