mirrors
/
micropython
mirror of https://github.com/micropython/micropython.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity

Updated Hardware API (markdown)

Daniel Campora 2015-11-04 09:55:56 +01:00
parent 3bff859e6f
commit f643f211e5
1 changed files with 1 additions and 1 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

2
Hardware-API.md

@ -135,7 +135,7 @@ Creates and initilizes a pin.
- `Pin.OPEN_DRAIN` RECOMMENDED - Pin configured for open-drain output, with special requirements for input handling. Open-drain output works in following way: if output value is set to 0, pin is low level; if output value is 1, pin is in high impedance state. Some MCUs don't support open-drain outputs directly, but it's almost always possible to emulate it (by outputting low level, in case of 0 value, or setting pin as input in case of 1 value). It is recommended that software implemented such emulation (see below for additional requirements for input handling).
- `Pin.ALT` OPTIONAL - Pin is configured to perform alternative function, which is MCU-specific. For pin configured in such way, any other Pin methods (except .init()) are not applicable (calling them will lead to undefined, or hardware-specific, result)
- `Pin.ALT_OPEN_DRAIN` OPTIONAL - Same as `Pin.ALT`, but pin is set as open-drain.
- `pull` is optional and positional (also can be named).
- `pull` is optional and positional (also can be named). May take `Pin.PULL_UP`, `Pin.PULL_DOWN` or `None`
- The rest of args are kwonly.
- `value` is required for a software to implement; it is valid only for `Pin.OUT` and `Pin.OPEN_DRAIN` modes and specifies initial output pin value if given.
- The rest are optional for software to implement, and a software can define them and also define others.