pimoroni-pico/examples/CMakeLists.txt

add_subdirectory(breakout_dotmatrix)
add_subdirectory(breakout_encoder)
add_subdirectory(breakout_ioexpander)
add_subdirectory(breakout_ltr559)
add_subdirectory(breakout_colourlcd160x80)
add_subdirectory(breakout_roundlcd)
add_subdirectory(breakout_rgbmatrix5x5)
add_subdirectory(breakout_matrix11x7)
add_subdirectory(breakout_mics6814)
add_subdirectory(breakout_pmw3901)
add_subdirectory(breakout_potentiometer)
add_subdirectory(breakout_rtc)
add_subdirectory(breakout_trackball)
add_subdirectory(breakout_sgp30)
add_subdirectory(breakout_colourlcd240x240)
add_subdirectory(breakout_msa301)
add_subdirectory(breakout_bme688)
add_subdirectory(breakout_bmp280)
add_subdirectory(breakout_bme280)
add_subdirectory(breakout_as7262)
add_subdirectory(breakout_bh1745)
add_subdirectory(breakout_icp10125)
add_subdirectory(breakout_scd41)
add_subdirectory(breakout_vl53l5cx)
add_subdirectory(breakout_pms5003)

add_subdirectory(pico_display)
add_subdirectory(pico_display_2)
add_subdirectory(pico_unicorn)
add_subdirectory(pico_unicorn_plasma)
add_subdirectory(pico_scroll)
add_subdirectory(pico_enc_explorer)
add_subdirectory(pico_explorer)
add_subdirectory(pico_pot_explorer)
add_subdirectory(pico_explorer_encoder)
add_subdirectory(pico_motor_shim)
add_subdirectory(pico_rgb_keypad)
add_subdirectory(pico_rtc_display)
add_subdirectory(pico_rtc)
add_subdirectory(pico_tof_display)
add_subdirectory(pico_trackball_display)
add_subdirectory(pico_audio)
add_subdirectory(pico_wireless)

add_subdirectory(plasma2040)
add_subdirectory(badger2040)
add_subdirectory(tufty2040)
add_subdirectory(interstate75)
add_subdirectory(servo2040)
add_subdirectory(motor2040)
add_subdirectory(encoder)
C++ and MP support and examples for Dotmatrix breakout (#133) * C driver for LTP305 breakout * Micropython bindings for LTP305 breakout * Micropython examples for dotmatrix * C++ examples for dotmatrix Co-authored-by: Phil Howard <phil@gadgetoid.com> 2021-05-04 10:34:52 +01:00			`add_subdirectory(breakout_dotmatrix)`
Renamed IOExpander and added Pot, Enc, and MICS specific classes 2021-05-11 17:18:43 +01:00			`add_subdirectory(breakout_encoder)`
Added C++ examples for IOExpander 2021-05-13 14:35:11 +01:00			`add_subdirectory(breakout_ioexpander)`
C++ and MP support and example for LTR559 breakout (#135) * C driver and example for LTR559 breakout * Micropython bindings and example for LTR559 2021-05-06 09:48:17 +01:00			`add_subdirectory(breakout_ltr559)`
Micropython bindings for small ColourLCD and ST7735 2021-04-23 11:56:42 +01:00			`add_subdirectory(breakout_colourlcd160x80)`
Created dedicated library class for round LCD breakout 2021-03-30 13:51:00 +01:00			`add_subdirectory(breakout_roundlcd)`
IS31FL3731 for RGBMatrix5x5 and Matrix11x7 Add IS31FL3731 driver Add RGBMatrix5x5 library and example Add Matrix11x7 library and example Co-authored-by: ZodiusInfuser <christopher.parrott2@gmail.com> 2021-04-22 17:07:38 +01:00			`add_subdirectory(breakout_rgbmatrix5x5)`
			`add_subdirectory(breakout_matrix11x7)`
Renamed IOExpander and added Pot, Enc, and MICS specific classes 2021-05-11 17:18:43 +01:00			`add_subdirectory(breakout_mics6814)`
Initial setup for PMW/PAA flow sensor 2021-05-21 17:35:01 +01:00			`add_subdirectory(breakout_pmw3901)`
Renamed IOExpander and added Pot, Enc, and MICS specific classes 2021-05-11 17:18:43 +01:00			`add_subdirectory(breakout_potentiometer)`
Updated RV3028 driver to our coding style and included a standalone C example 2021-05-10 06:23:34 +01:00			`add_subdirectory(breakout_rtc)`
C++ and MP support and example for Trackball breakout (#134) * C and Micropython bindings for trackball * C and Micropython examples for trackball 2021-05-04 22:29:53 +01:00			`add_subdirectory(breakout_trackball)`
SGP30 driver for Raspberry Pico Co-authored-by: ZodiusInfuser <christopher.parrott2@gmail.com> 2021-03-17 15:53:33 +00:00			`add_subdirectory(breakout_sgp30)`
Micropython bindings for ColourLCD and minor tweaks for ST7789, and RoundLCD 2021-04-23 00:44:27 +01:00			`add_subdirectory(breakout_colourlcd240x240)`
Added MSA301 driver, library, and example 2021-05-13 13:12:30 +01:00			`add_subdirectory(breakout_msa301)`
Bringup BME688 and BME680 sensors This changeset brings the BOSCH BME68X Sensor API library in as a submodule and makes it buildable with CMake. A thin wrapper- the BME68X driver- provides simple init, configure, read_forced and read_parallel functions. Two BME688 examples are available for forced-mode and parallel-mode operation. 2021-05-11 17:31:38 +01:00			`add_subdirectory(breakout_bme688)`
C++ SDK Support for BME280 and BMP280 2021-05-14 12:39:46 +01:00			`add_subdirectory(breakout_bmp280)`
			`add_subdirectory(breakout_bme280)`
Plasma 2040 library & examples Library: Includes classes for driving WS2812 and APA102 LEDs and defines for Plasma features. Encoder Example: Supports connecting a Rotary Encoder via the Qw'St connector. Works with APA102 or WS281X pixels. Pressing A will cycle between: 1. Colour change 2. Brightness change 3. Cycle delay Pressing B will switch back into auto-cycle mode. Turning the encoder at any time will switch out of auto cycle mode into parameter adjust mode. Also includes a bugfix to Rotary Encoder for getting the interrupt correctly. Rainbow Example: Basic rainbow cycle, press B to speed up and A to slow down. 2021-07-16 17:01:55 +01:00			`add_subdirectory(breakout_as7262)`
			`add_subdirectory(breakout_bh1745)`
Driver for ICP10125 temperature/pressure sensor 2021-07-22 18:36:33 +01:00			`add_subdirectory(breakout_icp10125)`
New driver for SCD4X series CO2 sensors Submodule Sensirion's embedded-i2c-scd4x driver Add i2c_hal.cpp to binds it to Pimoroni::I2C Port (loosely) scd4x_i2c_example_usage.c to Pico 2021-06-28 14:39:06 +01:00			`add_subdirectory(breakout_scd41)`
VL53L5CX: Initial bringup 2022-04-19 13:01:54 +01:00			`add_subdirectory(breakout_vl53l5cx)`
PMS5003: Basic PMS5003 active-mode only driver. 2022-05-25 10:48:26 +01:00			`add_subdirectory(breakout_pms5003)`
Micropython bindings for ColourLCD and minor tweaks for ST7789, and RoundLCD 2021-04-23 00:44:27 +01:00
moved examples into their own directory, moved pico support code into libraries directory, fixed cmake configuration 2021-01-16 16:00:15 +00:00			`add_subdirectory(pico_display)`
C class and MP bindings for PicoDisplay2 2021-06-17 15:33:05 +01:00			`add_subdirectory(pico_display_2)`
pico scroll library and example 2021-01-16 16:38:58 +00:00			`add_subdirectory(pico_unicorn)`
Pico Unicorn Plasma Added plasma example for Unicorn display 2021-01-26 12:27:39 +00:00			`add_subdirectory(pico_unicorn_plasma)`
PicoExplorer library and example, basic text support for PicoGraphics 2021-01-17 07:41:25 +00:00			`add_subdirectory(pico_scroll)`
PicoExplorer C demos for Enc and Pot 2021-05-12 23:34:43 +01:00			`add_subdirectory(pico_enc_explorer)`
Added c++ code and mpy wrapper for pico_rgb_keypad, with examples 2021-01-19 18:40:51 +00:00			`add_subdirectory(pico_explorer)`
PicoExplorer C demos for Enc and Pot 2021-05-12 23:34:43 +01:00			`add_subdirectory(pico_pot_explorer)`
Added an example for using an encoder with the PicoExplorer 2021-02-10 16:26:18 +00:00			`add_subdirectory(pico_explorer_encoder)`
Merged in old motor implementation 2022-03-28 18:32:05 +01:00			`add_subdirectory(pico_motor_shim)`
RV3028 RTC Driver and example for Raspberry Pico 2021-02-03 14:20:31 +00:00			`add_subdirectory(pico_rgb_keypad)`
			`add_subdirectory(pico_rtc_display)`
initial rtc driver and example 2022-05-27 15:44:58 +01:00			`add_subdirectory(pico_rtc)`
Add Pico Audio Pack example 2021-03-31 13:44:33 +01:00			`add_subdirectory(pico_tof_display)`
C++ and MP support and example for Trackball breakout (#134) * C and Micropython bindings for trackball * C and Micropython examples for trackball 2021-05-04 22:29:53 +01:00			`add_subdirectory(pico_trackball_display)`
Added latest local code for wireless pack 2021-03-29 17:05:06 +01:00			`add_subdirectory(pico_audio)`
			`add_subdirectory(pico_wireless)`
Plasma 2040 library & examples Library: Includes classes for driving WS2812 and APA102 LEDs and defines for Plasma features. Encoder Example: Supports connecting a Rotary Encoder via the Qw'St connector. Works with APA102 or WS281X pixels. Pressing A will cycle between: 1. Colour change 2. Brightness change 3. Cycle delay Pressing B will switch back into auto-cycle mode. Turning the encoder at any time will switch out of auto cycle mode into parameter adjust mode. Also includes a bugfix to Rotary Encoder for getting the interrupt correctly. Rainbow Example: Basic rainbow cycle, press B to speed up and A to slow down. 2021-07-16 17:01:55 +01:00
Added a plasma2040 namespaces 2021-08-19 14:12:56 +01:00			`add_subdirectory(plasma2040)`
added support for badger2040 2022-01-07 14:46:16 +00:00			`add_subdirectory(badger2040)`
Tufty2040: Initial screen bringup. 2022-05-25 10:44:14 +01:00			`add_subdirectory(tufty2040)`
Pure C++ HUB75 example This code is intentionally written in C++ to illustrate the basics of driving HUB75 without being overly complicated to read and understand. Tested on a 32x32 panel and a 64x64 "FM6126A" panel, for which this code includes a magic pair of register settings. 2021-08-23 22:55:24 +01:00			`add_subdirectory(interstate75)`
current WIP code for PIO based PWM 2022-02-11 11:40:04 +00:00			`add_subdirectory(servo2040)`
Added initial structure of new motor classes 2022-03-28 22:46:58 +01:00			`add_subdirectory(motor2040)`
Added encoder C++ examples 2022-05-12 16:15:40 +01:00			`add_subdirectory(encoder)`