pimoroni-pico/micropython/examples/servo2040/single_servo.py

import time
import math
from servo import Servo, servo2040

"""
Demonstrates how to create a Servo object and control it.
"""

# Create a servo on pin 0
s = Servo(servo2040.SERVO_1)

# Enable the servo (this puts it at the middle)
s.enable()
time.sleep(2)

# Go to min
s.to_min()
time.sleep(2)

# Go to max
s.to_max()
time.sleep(2)

# Go back to mid
s.to_mid()
time.sleep(2)


SWEEPS = 3              # How many sweeps of the servo to perform
STEPS = 10              # The number of discrete sweep steps
STEPS_INTERVAL = 0.5    # The time in seconds between each step of the sequence
SWEEP_EXTENT = 90.0     # How far from zero to move the servo when sweeping

# Do a sine sweep
for j in range(SWEEPS):
    for i in range(360):
        s.value(math.sin(math.radians(i)) * SWEEP_EXTENT)
        time.sleep(0.02)

# Do a stepped sweep
for j in range(SWEEPS):
    for i in range(0, STEPS):
        s.to_percent(i, 0, STEPS, 0.0 - SWEEP_EXTENT, SWEEP_EXTENT)
        time.sleep(STEPS_INTERVAL)
    for i in range(0, STEPS):
        s.to_percent(i, STEPS, 0, 0.0 - SWEEP_EXTENT, SWEEP_EXTENT)
        time.sleep(STEPS_INTERVAL)

# Disable the servo
s.disable()