112 lines
3.2 KiB
C++
112 lines
3.2 KiB
C++
|
#include <cstdio>
|
||
|
|
#include "pico/stdlib.h"
|
||
|
|
|
||
|
|
#include "servo2040.hpp"
|
||
|
|
#include "analogmux.hpp"
|
||
|
|
#include "analog.hpp"
|
||
|
|
#include "button.hpp"
|
||
|
|
|
||
|
|
/*
|
||
|
|
An example of how to use Servo 2040's current measuring
|
||
|
|
ability and display the value on the onboard LED bar.
|
||
|
|
|
||
|
|
Press "Boot" to exit the program.
|
||
|
|
*/
|
||
|
|
|
||
|
|
using namespace plasma;
|
||
|
|
using namespace servo;
|
||
|
|
|
||
|
|
// The brightness of the LEDs
|
||
|
|
constexpr float BRIGHTNESS = 0.4f;
|
||
|
|
|
||
|
|
// How many times to update LEDs and Servos per second
|
||
|
|
const uint UPDATES = 50;
|
||
|
|
|
||
|
|
// The maximum current, in amps, to show on the meter
|
||
|
|
constexpr float MAX_CURRENT = 3.0f;
|
||
|
|
|
||
|
|
// The number of current measurements to take per reading
|
||
|
|
const uint SAMPLES = 50;
|
||
|
|
|
||
|
|
// The time between each current measurement
|
||
|
|
const uint TIME_BETWEEN_MS = 1;
|
||
|
|
|
||
|
|
// Create a servo cluster for pins 0 to 7, using PIO 0 and State Machine 0
|
||
|
|
const uint START_PIN = servo2040::SERVO_1;
|
||
|
|
const uint END_PIN = servo2040::SERVO_8;
|
||
|
|
const uint NUM_SERVOS = (END_PIN - START_PIN) + 1;
|
||
|
|
ServoCluster servos = ServoCluster(pio0, 0, START_PIN, NUM_SERVOS);
|
||
|
|
|
||
|
|
// Set up the shared analog inputs
|
||
|
|
Analog cur_adc = Analog(servo2040::SHARED_ADC, servo2040::CURRENT_GAIN,
|
||
|
|
servo2040::SHUNT_RESISTOR, servo2040::CURRENT_OFFSET);
|
||
|
|
|
||
|
|
// Set up the analog multiplexer, including the pin for controlling pull-up/pull-down
|
||
|
|
AnalogMux mux = AnalogMux(servo2040::ADC_ADDR_0, servo2040::ADC_ADDR_1, servo2040::ADC_ADDR_2,
|
||
|
|
PIN_UNUSED, servo2040::SHARED_ADC);
|
||
|
|
|
||
|
|
// Create the LED bar, using PIO 1 and State Machine 0
|
||
|
|
WS2812 led_bar(servo2040::NUM_LEDS, pio1, 0, servo2040::LED_DATA);
|
||
|
|
|
||
|
|
// Create the user button
|
||
|
|
Button user_sw(servo2040::USER_SW);
|
||
|
|
|
||
|
|
|
||
|
|
int main() {
|
||
|
|
stdio_init_all();
|
||
|
|
|
||
|
|
// Initialise the servo cluster
|
||
|
|
servos.init();
|
||
|
|
|
||
|
|
// Start updating the LED bar
|
||
|
|
led_bar.start();
|
||
|
|
|
||
|
|
// Enable all servos (this puts them at the middle).
|
||
|
|
// The servos are not going to be moved, but are activated to give a current draw
|
||
|
|
servos.enable_all();
|
||
|
|
|
||
|
|
// Read sensors until the user button is pressed
|
||
|
|
while(!user_sw.raw()) {
|
||
|
|
|
||
|
|
// Select the current sense
|
||
|
|
mux.select(servo2040::CURRENT_SENSE_ADDR);
|
||
|
|
|
||
|
|
// Read the current sense several times and average the result
|
||
|
|
float current = 0.0f;
|
||
|
|
for(auto i = 0u; i < SAMPLES; i++) {
|
||
|
|
current += cur_adc.read_current();
|
||
|
|
sleep_ms(TIME_BETWEEN_MS);
|
||
|
|
}
|
||
|
|
current /= SAMPLES;
|
||
|
|
|
||
|
|
// Print out the current sense value
|
||
|
|
printf("Current = %f\n", current);
|
||
|
|
|
||
|
|
// Convert the current to a percentage of the maximum we want to show
|
||
|
|
float percent = (current / MAX_CURRENT);
|
||
|
|
|
||
|
|
// Update all the LEDs
|
||
|
|
for(auto i = 0u; i < servo2040::NUM_LEDS; i++) {
|
||
|
|
// Calculate the LED's hue, with Red for high currents and Green for low
|
||
|
|
float hue = (1.0f - (float)i / (float)(servo2040::NUM_LEDS - 1)) * 0.333f;
|
||
|
|
|
||
|
|
// Calculate the current level the LED represents
|
||
|
|
float level = (i + 0.5f) / servo2040::NUM_LEDS;
|
||
|
|
// If the percent is above the level, light the LED, otherwise turn it off
|
||
|
|
if(percent >= level)
|
||
|
|
led_bar.set_hsv(i, hue, 1.0f, BRIGHTNESS);
|
||
|
|
else
|
||
|
|
led_bar.set_hsv(i, hue, 1.0f, 0.0f);
|
||
|
|
}
|
||
|
|
}
|
||
|
|
|
||
|
|
// Stop all the servos
|
||
|
|
servos.disable_all();
|
||
|
|
|
||
|
|
// Turn off the LED bar
|
||
|
|
led_bar.clear();
|
||
|
|
|
||
|
|
// Sleep a short time so the clear takes effect
|
||
|
|
sleep_ms(100);
|
||
|
|
}
|