pimoroni-pico/drivers/CMakeLists.txt

add_subdirectory(analog)
add_subdirectory(analogmux)
add_subdirectory(esp32spi)
add_subdirectory(ioexpander)
add_subdirectory(ltp305)
add_subdirectory(ltr559)
add_subdirectory(pmw3901)
add_subdirectory(sgp30)
add_subdirectory(st7735)
add_subdirectory(st7789)
add_subdirectory(msa301)
add_subdirectory(rv3028)
add_subdirectory(trackball)
add_subdirectory(vl53l1x)
add_subdirectory(is31fl3731)
add_subdirectory(fatfs)
add_subdirectory(sdcard)
add_subdirectory(as7262)
add_subdirectory(bh1745)
add_subdirectory(bme68x)
add_subdirectory(bmp280)
add_subdirectory(bme280)
add_subdirectory(button)
add_subdirectory(plasma)
add_subdirectory(rgbled)
add_subdirectory(icp10125)
add_subdirectory(scd4x)
add_subdirectory(hub75)
add_subdirectory(uc8151)
add_subdirectory(pwm)
add_subdirectory(servo)
add_subdirectory(encoder-pio)
add_subdirectory(motor)
Added analog class for plasma current reading 2021-08-18 12:16:51 +01:00			`add_subdirectory(analog)`
Added AnalogMux to C++ 2022-03-25 23:41:44 +00:00			`add_subdirectory(analogmux)`
Progressed on Wifi class, adding IPAddress 2021-03-29 21:08:29 +01:00			`add_subdirectory(esp32spi)`
Renamed IOExpander and added Pot, Enc, and MICS specific classes 2021-05-11 17:18:43 +01:00			`add_subdirectory(ioexpander)`
C++ and MP support and examples for Dotmatrix breakout (#133) * C driver for LTP305 breakout * Micropython bindings for LTP305 breakout * Micropython examples for dotmatrix * C++ examples for dotmatrix Co-authored-by: Phil Howard <phil@gadgetoid.com> 2021-05-04 10:34:52 +01:00			`add_subdirectory(ltp305)`
C++ and MP support and example for LTR559 breakout (#135) * C driver and example for LTR559 breakout * Micropython bindings and example for LTR559 2021-05-06 09:48:17 +01:00			`add_subdirectory(ltr559)`
Initial setup for PMW/PAA flow sensor 2021-05-21 17:35:01 +01:00			`add_subdirectory(pmw3901)`
Micropython binding fixes and example for SGP30 2021-05-05 12:21:57 +01:00			`add_subdirectory(sgp30)`
Micropython bindings for small ColourLCD and ST7735 2021-04-23 11:56:42 +01:00			`add_subdirectory(st7735)`
example driver for MSA301, ability to embed an image into binary and draw it on screen 2021-01-17 16:05:28 +00:00			`add_subdirectory(st7789)`
RV3028 RTC Driver and example for Raspberry Pico 2021-02-03 14:20:31 +00:00			`add_subdirectory(msa301)`
			`add_subdirectory(rv3028)`
C++ and MP support and example for Trackball breakout (#134) * C and Micropython bindings for trackball * C and Micropython examples for trackball 2021-05-04 22:29:53 +01:00			`add_subdirectory(trackball)`
Pico driver for vl53l1x Time of Flight breakout 2021-02-22 21:46:48 +00:00			`add_subdirectory(vl53l1x)`
IS31FL3731 for RGBMatrix5x5 and Matrix11x7 Add IS31FL3731 driver Add RGBMatrix5x5 library and example Add Matrix11x7 library and example Co-authored-by: ZodiusInfuser <christopher.parrott2@gmail.com> 2021-04-22 17:07:38 +01:00			`add_subdirectory(is31fl3731)`
Pico Wireless HTTP SD Card demo 2021-05-05 17:32:35 +01:00			`add_subdirectory(fatfs)`
			`add_subdirectory(sdcard)`
AS7262 driver Co-authored-by: ZodiusInfuser <christopher.parrott2@gmail.com> 2021-01-21 20:24:18 +00:00			`add_subdirectory(as7262)`
Add BH1745 driver 2021-01-27 11:14:25 +00:00			`add_subdirectory(bh1745)`
Bringup BME688 and BME680 sensors This changeset brings the BOSCH BME68X Sensor API library in as a submodule and makes it buildable with CMake. A thin wrapper- the BME68X driver- provides simple init, configure, read_forced and read_parallel functions. Two BME688 examples are available for forced-mode and parallel-mode operation. 2021-05-11 17:31:38 +01:00			`add_subdirectory(bme68x)`
C++ SDK Support for BME280 and BMP280 2021-05-14 12:39:46 +01:00			`add_subdirectory(bmp280)`
			`add_subdirectory(bme280)`
Add RGBLED and Button libraries "RGBLED" PWMs 3 pins as a single RGB LED and exposes methods to set the colour via HSV/RGB. "Button" handles tracking the state and changed state of a single GPIO button, in addition to supporting auto-repeat for held-down buttons. 2021-07-20 10:05:24 +01:00			`add_subdirectory(button)`
Move apa and ws PIO into drivers so they can be easily used with more boards 2021-08-19 13:40:46 +01:00			`add_subdirectory(plasma)`
Add RGBLED and Button libraries "RGBLED" PWMs 3 pins as a single RGB LED and exposes methods to set the colour via HSV/RGB. "Button" handles tracking the state and changed state of a single GPIO button, in addition to supporting auto-repeat for held-down buttons. 2021-07-20 10:05:24 +01:00			`add_subdirectory(rgbled)`
Driver for ICP10125 temperature/pressure sensor 2021-07-22 18:36:33 +01:00			`add_subdirectory(icp10125)`
New driver for SCD4X series CO2 sensors Submodule Sensirion's embedded-i2c-scd4x driver Add i2c_hal.cpp to binds it to Pimoroni::I2C Port (loosely) scd4x_i2c_example_usage.c to Pico 2021-06-28 14:39:06 +01:00			`add_subdirectory(scd4x)`
HUB75 tidyup, examples 2021-11-23 12:48:55 +00:00			`add_subdirectory(hub75)`
added support for badger2040 2022-01-07 14:46:16 +00:00			`add_subdirectory(uc8151)`
Moved common PWM and MultiPWM out of servo driver, and renamed to cluster 2022-02-20 11:00:36 +00:00			`add_subdirectory(pwm)`
current WIP code for PIO based PWM 2022-02-11 11:40:04 +00:00			`add_subdirectory(servo)`
Created a quadrature encoder reader using the Pico's PIO 2021-02-10 16:25:25 +00:00			`add_subdirectory(encoder-pio)`
Merged in old motor implementation 2022-03-28 18:32:05 +01:00			`add_subdirectory(motor)`