The BME68X library is *linked* against the MicroPython bindings, rather than compiled directly in.
This saves specifing the list of target files twice.
Add a pimoroni.py module which includes Python code equivilents of the RGBLED and Button C++ drivers.
This is simpler than binding these drivers into MicroPython and much easier to maintain/extend.
As discussed on https://forums.pimoroni.com/t/pico-wireless-pack-fetching-data-from-web/17215/ the cheerlights.py example was stalling on the first HTTP request.
I have added a timeout in this case, so the code will stop waiting and retry after the 60second polling wait period. Users report this does the trick!
This change appends the list dir and project root dir to CMAKE_MODULE_PATH so that it doesn't need prepended to each "include" directive.
All .mk files have been deleted, since these are completely redundant.
This is the final piece of the puzzle.
Prior to this rather considerable change, Pimoroni breakouts were not de-init'ing I2C when they failed to init()
This change adds a __del__ method which cleans up the I2C instance attached to a MicroPython object.
Under the hood this calls i2c_deinit() and resets the associated pins to their default state.
This means that I2C is now cleaned up during a *soft* reset, so running a script with the wrong pins, seeing an error,
changing the pins and running it again will not result in subsequent I2C errors. Previously a hard reset was required.
To recreate on Breakout Garden run the following code:
```
from breakout_potentiometer import BreakoutPotentiometer
from pimoroni_i2c import PimoroniI2C
i2c = PimoroniI2C()
pot = BreakoutPotentiometer(i2c)
```
This will fail correctly with "Potentiometer breakout not found when initialising."
(The default pins are configured for Pico Explorer)
Now change that to the following and run again without hard-resetting:
```
from breakout_potentiometer import BreakoutPotentiometer
from pimoroni_i2c import PimoroniI2C
i2c = PimoroniI2C(4, 5)
pot = BreakoutPotentiometer(i2c)
```
This should now work, since the failed I2C instance was cleaned up.
Without this change, the second attempt would result in an inexplicable failure.
Since most? (many?) Pico users do not have a reset button, this trap requiring a hard-reset is pretty nasty and would likely have resulted in a support nightmare.
Whew.
Removes i2c_inst_t from constructors since it's ignored, and updated the Python bindings not to supply this argument. Instance is inferred from the supplied pins.
Removes all driver-specific SDA/SCL pin definitions and defaults.
Pin type is "uint" everywhere, but "PIN_UNUSED" is *int*_max for MicroPython compat. That's still a lot of pins!
Adds baudrate to the I2C class, and allows a driver (like Trackball) to check the baudrate is supported
This change adds a common I2C class, gathering various I2C functions into a single point of responsibility.
It's necessary for correctly managing the I2C bus pins and state across multiple devices.
* Add a common/pimoroni.hpp to list default pins for various add-ons
* Move the BG SPI Slot enum here for safe keeping
* Switch all GPIO pin references to "uint" to match Pico SDK and bring back PIN_UNUSED as UINT_MAX
This change removes file-relative include paths and adds the project root as a global include path.
* Project root added to CMakeLists.txt so that all targets can find includes
* Project root added micropython.cmake so that targets used by the MicroPython build can find includes
Note: pico-boilerplate projects must set this include path
Fixes paths that only resolve when the top-level directory is named "pimoroni-pico"
and is adjacent to the "micropython" directory when building a MicroPython release.
* C driver for LTP305 breakout
* Micropython bindings for LTP305 breakout
* Micropython examples for dotmatrix
* C++ examples for dotmatrix
Co-authored-by: Phil Howard <phil@gadgetoid.com>
Move scroll_text into the C++ library and make it support std::string.
Move show_bitmap_1d to set_bitmap_1d in the C++ library. Use it as the basis for show_text and scroll_text.
Change show_text to set_text since it does not implicitly show the result.
Add a new pico-scroll demo to show off the scrolling text functionality.
Passing interchangably as int/bytes was weird, and due to Python's signedness on int resulted in a heck of a bug-hunt.
I've switched IP address to converting from/to a tuple internally, so Python code doesn't have to be weird.
Uses an arbitrarily sized, dynamically alloc'd buffer. This should *probably* do the legwork to get the whole buffer and give it to Python without needing multiple calls.
Using release 0.1.1 of pimoroni-pico-micropython, the picokeypad.clear() function does not seem to work. Looking through the code, it appears that clear is actually calling init instead.
The ../../../pimoroni-pico path was selecting the "pimoroni-pico" directory adjacent my "micropython" directory
However I was attempting to build against one in a different parent directory.
This resulted in the MicroPython modules including the wrong (old) header and exploding.
* Display temp as 00.00 with floating point component
* Use the temp value to blend from a list of display colours
* Fixed slowdown bug when screen begins to scroll
The upstream MicroPython rp2 port has re-enabled -Werror so we need to either fix warnings or,
in the case of those generated by C++/C MicroPython binding weirdness, suppress them.
This change submodules in our fork of ulab with an added usermod.cmake and adds it to the top-level usermod.cmake for our shipped modules.
It should - in theory - result in ulab being included in release builds.
Keep the bouncing balls in the court and gives balls a speed in proportion to their size. Created from code in #63
Co-authored-by: Mark Emery <mark@markemerylimited.co.uk>
Added code to show a simple example of the on-board A/B/X/Y button press detection and displaying the result on the display, as this feature of the Pico Explorer hardware was not being demonstrated in the initial demo.py example.
* fixed explorer library, added to cmake, and added quick demo
* display status of motors during demo
* increase motor power in demo
Co-authored-by: Jonathan Williamson <jon@pimoroni.com>
* typedef pen and constexpr create_pen for #6
* Prevent out of bounds clip permitting write outside buffer
* camelcase rect, point, and pen types
* added triangle(p1, p2, p3) and polygon(std::vector<Point> points) methods to graphics library
* change all uses of pen that were uint16_t into Pen type
* updated micropython modules to use new rect, point, pen naming
* added line(p1, p2) method to pico graphics library with faster vertical/horizontal special cases
Co-authored-by: Jonathan Williamson <jon@pimoroni.com>
This rebuilds the crucial parts of MicroPython's bytearray creation and calls it quietly from inside the C-bindings, avoiding the need for a bytearray to be passed in by the user.
Whether this magically holds a reference and evades GC remains to be seen.
Only *one* usermod directory can be specified, so the build command becomes something like:
make USER_C_MODULES=/path/to/pimoroni-pico/micropython/modules/
The `usermod.cmake` in the "modules" dir will then include all of the modules. Comment lines our here to disable them.
No need to configure anythign in `mpconfigport.h` since the defines are set by the `usermod.cmake` files.
Phil Howard
Philip Howard
frankdrn
ZodiusInfuser
helgibbons
Graeme Winter
DiddyWolf
dsssssssss9
David Tillotson
Salvatore La Bua
crispythegoat
SimUKdev
JC
Roger Thomas
James Sutton