115 lines
4.1 KiB
C++
115 lines
4.1 KiB
C++
#include "apa102.hpp"
|
|
#include "common/pimoroni_common.hpp"
|
|
|
|
namespace plasma {
|
|
|
|
APA102::APA102(uint num_leds, PIO pio, uint sm, uint pin_dat, uint pin_clk, uint freq, RGB* buffer) : buffer(buffer), num_leds(num_leds), pio(pio), sm(sm) {
|
|
pio_program_offset = pio_add_program(pio, &apa102_program);
|
|
|
|
pio_sm_set_pins_with_mask(pio, sm, 0, (1u << pin_clk) | (1u << pin_dat));
|
|
pio_sm_set_pindirs_with_mask(pio, sm, ~0u, (1u << pin_clk) | (1u << pin_dat));
|
|
pio_gpio_init(pio, pin_clk);
|
|
pio_gpio_init(pio, pin_dat);
|
|
|
|
pio_sm_config c = apa102_program_get_default_config(pio_program_offset);
|
|
sm_config_set_out_pins(&c, pin_dat, 1);
|
|
sm_config_set_sideset_pins(&c, pin_clk);
|
|
|
|
sm_config_set_out_shift(&c, false, true, 32);
|
|
sm_config_set_fifo_join(&c, PIO_FIFO_JOIN_TX);
|
|
|
|
// The PIO program transmits 1 bit every 2 execution cycles
|
|
float div = (float)clock_get_hz(clk_sys) / (2 * freq);
|
|
sm_config_set_clkdiv(&c, div);
|
|
|
|
pio_sm_init(pio, sm, pio_program_offset, &c);
|
|
pio_sm_set_enabled(pio, sm, true);
|
|
|
|
dma_channel = dma_claim_unused_channel(true);
|
|
dma_channel_config config = dma_channel_get_default_config(dma_channel);
|
|
channel_config_set_bswap(&config, true);
|
|
channel_config_set_dreq(&config, pio_get_dreq(pio, sm, true));
|
|
channel_config_set_transfer_data_size(&config, DMA_SIZE_32);
|
|
channel_config_set_read_increment(&config, true);
|
|
dma_channel_configure(dma_channel, &config, &pio->txf[sm], NULL, 0, false);
|
|
|
|
if(this->buffer == nullptr) {
|
|
this->buffer = new RGB[num_leds];
|
|
managed_buffer = true;
|
|
}
|
|
}
|
|
|
|
bool APA102::dma_timer_callback(struct repeating_timer *t) {
|
|
((APA102*)t->user_data)->update();
|
|
return true;
|
|
}
|
|
|
|
void APA102::update(bool blocking) {
|
|
if(dma_channel_is_busy(dma_channel) && !blocking) return;
|
|
while(dma_channel_is_busy(dma_channel)) {}; // Block waiting for DMA finish
|
|
pio->txf[sm] = 0x00000000; // Output the APA102 start-of-frame bytes
|
|
dma_channel_set_trans_count(dma_channel, num_leds, false);
|
|
dma_channel_set_read_addr(dma_channel, buffer, true);
|
|
if (!blocking) return;
|
|
while(dma_channel_is_busy(dma_channel)) {}; // Block waiting for DMA finish
|
|
// This is necessary to prevent a single LED remaining lit when clearing and updating.
|
|
// This code will only run in *blocking* mode since it's assumed non-blocking will be continuously updating anyway.
|
|
// Yes this will slow down LED updates... don't use blocking mode unless you're clearing LEDs before shutdown,
|
|
// or you *really* want to avoid actively driving your APA102s for some reason.
|
|
for(auto x = 0u; x < (num_leds / 16) + 1; x++) {
|
|
pio->txf[sm] = 0x00000000;
|
|
// Some delay is needed, since the PIO is async
|
|
// and this could be happening during a destructor/MicroPython soft reset
|
|
sleep_ms(1); // Chosen by fair dice roll
|
|
}
|
|
}
|
|
|
|
bool APA102::start(uint fps) {
|
|
add_repeating_timer_ms(-(1000 / fps), dma_timer_callback, (void*)this, &timer);
|
|
return true;
|
|
}
|
|
|
|
bool APA102::stop() {
|
|
return cancel_repeating_timer(&timer);
|
|
}
|
|
|
|
void APA102::clear() {
|
|
for (auto i = 0u; i < num_leds; ++i) {
|
|
set_rgb(i, 0, 0, 0);
|
|
}
|
|
}
|
|
|
|
void APA102::set_hsv(uint32_t index, float h, float s, float v) {
|
|
float i = floor(h * 6.0f);
|
|
float f = h * 6.0f - i;
|
|
v *= 255.0f;
|
|
uint8_t p = v * (1.0f - s);
|
|
uint8_t q = v * (1.0f - f * s);
|
|
uint8_t t = v * (1.0f - (1.0f - f) * s);
|
|
|
|
switch (int(i) % 6) {
|
|
case 0: set_rgb(index, v, t, p); break;
|
|
case 1: set_rgb(index, q, v, p); break;
|
|
case 2: set_rgb(index, p, v, t); break;
|
|
case 3: set_rgb(index, p, q, v); break;
|
|
case 4: set_rgb(index, t, p, v); break;
|
|
case 5: set_rgb(index, v, p, q); break;
|
|
}
|
|
}
|
|
|
|
void APA102::set_rgb(uint32_t index, uint8_t r, uint8_t g, uint8_t b, bool gamma) {
|
|
if(gamma) {
|
|
r = pimoroni::GAMMA_8BIT[r];
|
|
g = pimoroni::GAMMA_8BIT[g];
|
|
b = pimoroni::GAMMA_8BIT[b];
|
|
}
|
|
buffer[index].rgb(r, g, b);
|
|
}
|
|
|
|
void APA102::set_brightness(uint8_t b) {
|
|
for (auto i = 0u; i < num_leds; ++i) {
|
|
buffer[i].brightness(b);
|
|
}
|
|
}
|
|
|
|
} |