109 lines
3.7 KiB
CMake
109 lines
3.7 KiB
CMake
include(pimoroni_i2c/micropython)
|
|
include(pimoroni_bus/micropython)
|
|
|
|
include(breakout_dotmatrix/micropython)
|
|
include(breakout_encoder/micropython)
|
|
include(breakout_ioexpander/micropython)
|
|
include(breakout_ltr559/micropython)
|
|
include(breakout_colourlcd160x80/micropython)
|
|
include(breakout_as7262/micropython)
|
|
include(breakout_rgbmatrix5x5/micropython)
|
|
include(breakout_matrix11x7/micropython)
|
|
include(breakout_msa301/micropython)
|
|
include(breakout_pmw3901/micropython)
|
|
include(breakout_mics6814/micropython)
|
|
include(breakout_potentiometer/micropython)
|
|
include(breakout_rtc/micropython)
|
|
include(breakout_trackball/micropython)
|
|
include(breakout_sgp30/micropython)
|
|
include(breakout_bh1745/micropython)
|
|
include(breakout_bme68x/micropython)
|
|
include(breakout_bme280/micropython)
|
|
include(breakout_bmp280/micropython)
|
|
include(breakout_icp10125/micropython)
|
|
include(breakout_scd41/micropython)
|
|
include(breakout_vl53l5cx/micropython)
|
|
|
|
include(pico_scroll/micropython)
|
|
include(pico_rgb_keypad/micropython)
|
|
include(pico_unicorn/micropython)
|
|
include(pico_wireless/micropython)
|
|
include(pico_explorer/micropython)
|
|
|
|
include(bitmap_fonts/micropython)
|
|
|
|
include(plasma/micropython)
|
|
include(hub75/micropython)
|
|
include(pwm/micropython)
|
|
include(servo/micropython)
|
|
include(encoder/micropython)
|
|
include(motor/micropython)
|
|
include(qrcode/micropython/micropython)
|
|
include(adcfft/micropython)
|
|
include(pcf85063a/micropython)
|
|
|
|
include(st7789/micropython)
|
|
include(jpegdec/micropython)
|
|
|
|
include(modules_py/modules_py)
|
|
|
|
function(enable_ulab)
|
|
include(ulab/code/micropython)
|
|
|
|
target_compile_definitions(usermod_ulab INTERFACE
|
|
# Support for complex ndarrays
|
|
ULAB_SUPPORTS_COMPLEX=0
|
|
|
|
# Determines, whether scipy is defined in ulab. The sub-modules and functions
|
|
# of scipy have to be defined separately
|
|
ULAB_HAS_SCIPY=0
|
|
|
|
# The maximum number of dimensions the firmware should be able to support
|
|
# Possible values lie between 1, and 4, inclusive
|
|
ULAB_MAX_DIMS=2
|
|
|
|
# By setting this constant to 1, iteration over array dimensions will be implemented
|
|
# as a function (ndarray_rewind_array), instead of writing out the loops in macros
|
|
# This reduces firmware size at the expense of speed
|
|
ULAB_HAS_FUNCTION_ITERATOR=1
|
|
|
|
# If NDARRAY_IS_ITERABLE is 1, the ndarray object defines its own iterator function
|
|
# This option saves approx. 250 bytes of flash space
|
|
NDARRAY_IS_ITERABLE=1
|
|
|
|
# Slicing can be switched off by setting this variable to 0
|
|
NDARRAY_IS_SLICEABLE=1
|
|
|
|
# The default threshold for pretty printing. These variables can be overwritten
|
|
# at run-time via the set_printoptions() function
|
|
ULAB_HAS_PRINTOPTIONS=1
|
|
NDARRAY_PRINT_THRESHOLD=10
|
|
NDARRAY_PRINT_EDGEITEMS=3
|
|
|
|
# determines, whether the dtype is an object, or simply a character
|
|
# the object implementation is numpythonic, but requires more space
|
|
ULAB_HAS_DTYPE_OBJECT=0
|
|
|
|
# the ndarray binary operators
|
|
NDARRAY_HAS_BINARY_OPS=0
|
|
|
|
# Firmware size can be reduced at the expense of speed by using function
|
|
# pointers in iterations. For each operator, the function pointer saves around
|
|
# 2 kB in the two-dimensional case, and around 4 kB in the four-dimensional case.
|
|
|
|
NDARRAY_BINARY_USES_FUN_POINTER=1
|
|
|
|
NDARRAY_HAS_BINARY_OP_ADD=1
|
|
NDARRAY_HAS_BINARY_OP_EQUAL=1
|
|
NDARRAY_HAS_BINARY_OP_LESS=1
|
|
NDARRAY_HAS_BINARY_OP_LESS_EQUAL=1
|
|
NDARRAY_HAS_BINARY_OP_MORE=1
|
|
NDARRAY_HAS_BINARY_OP_MORE_EQUAL=1
|
|
NDARRAY_HAS_BINARY_OP_MULTIPLY=1
|
|
NDARRAY_HAS_BINARY_OP_NOT_EQUAL=1
|
|
NDARRAY_HAS_BINARY_OP_POWER=1
|
|
NDARRAY_HAS_BINARY_OP_SUBTRACT=1
|
|
NDARRAY_HAS_BINARY_OP_TRUE_DIVIDE=1
|
|
)
|
|
endfunction()
|