49 lines
1.6 KiB
Python
49 lines
1.6 KiB
Python
import time
|
|
from machine import Pin
|
|
from pimoroni import Analog, AnalogMux, Button
|
|
from servo import servo2040
|
|
|
|
"""
|
|
Shows how to initialise and read the 6 external
|
|
and 2 internal sensors of Servo 2040.
|
|
|
|
Press "Boot" to exit the program.
|
|
"""
|
|
|
|
# Set up the shared analog inputs
|
|
sen_adc = Analog(servo2040.SHARED_ADC)
|
|
vol_adc = Analog(servo2040.SHARED_ADC, servo2040.VOLTAGE_GAIN)
|
|
cur_adc = Analog(servo2040.SHARED_ADC, servo2040.CURRENT_GAIN,
|
|
servo2040.SHUNT_RESISTOR, servo2040.CURRENT_OFFSET)
|
|
|
|
# Set up the analog multiplexer, including the pin for controlling pull-up/pull-down
|
|
mux = AnalogMux(servo2040.ADC_ADDR_0, servo2040.ADC_ADDR_1, servo2040.ADC_ADDR_2,
|
|
muxed_pin=Pin(servo2040.SHARED_ADC))
|
|
|
|
# Set up the sensor addresses and have them pulled down by default
|
|
sensor_addrs = list(range(servo2040.SENSOR_1_ADDR, servo2040.SENSOR_6_ADDR + 1))
|
|
for addr in sensor_addrs:
|
|
mux.configure_pull(addr, Pin.PULL_DOWN)
|
|
|
|
# Create the user button
|
|
user_sw = Button(servo2040.USER_SW)
|
|
|
|
|
|
# Read sensors until the user button is pressed
|
|
while not user_sw.raw():
|
|
|
|
# Read each sensor in turn and print its voltage
|
|
for i in range(len(sensor_addrs)):
|
|
mux.select(sensor_addrs[i])
|
|
print("S", i + 1, " = ", round(sen_adc.read_voltage(), 3), sep="", end=", ")
|
|
|
|
# Read the voltage sense and print the value
|
|
mux.select(servo2040.VOLTAGE_SENSE_ADDR)
|
|
print("Voltage =", round(vol_adc.read_voltage(), 4), end=", ")
|
|
|
|
# Read the current sense and print the value
|
|
mux.select(servo2040.CURRENT_SENSE_ADDR)
|
|
print("Current =", round(cur_adc.read_current(), 4))
|
|
|
|
time.sleep(0.5)
|