227 lines
6.7 KiB
Python
227 lines
6.7 KiB
Python
import time
|
|
from machine import Pin, PWM, ADC
|
|
|
|
|
|
BREAKOUT_GARDEN_I2C_PINS = {"sda": 4, "scl": 5}
|
|
PICO_EXPLORER_I2C_PINS = {"sda": 20, "scl": 21}
|
|
HEADER_I2C_PINS = {"sda": 20, "scl": 21}
|
|
|
|
# Motor and encoder directions
|
|
NORMAL_DIR = 0x00
|
|
REVERSED_DIR = 0x01
|
|
|
|
BREAKOUT_GARDEN_SPI_SLOT_FRONT = 0
|
|
BREAKOUT_GARDEN_SPI_SLOT_BACK = 1
|
|
PICO_EXPLORER_SPI_ONBOARD = 2
|
|
|
|
|
|
class Analog:
|
|
def __init__(self, pin, amplifier_gain=1, resistor=0, offset=0):
|
|
self.gain = amplifier_gain
|
|
self.resistor = resistor
|
|
self.offset = offset
|
|
self.pin = ADC(pin)
|
|
|
|
def read_voltage(self):
|
|
return max((((self.pin.read_u16() * 3.3) / 65535) + self.offset) / self.gain, 0.0)
|
|
|
|
def read_current(self):
|
|
if self.resistor > 0:
|
|
return self.read_voltage() / self.resistor
|
|
else:
|
|
return self.read_voltage()
|
|
|
|
|
|
class AnalogMux:
|
|
def __init__(self, addr0, addr1=None, addr2=None, en=None, muxed_pin=None):
|
|
self.addr0_pin = Pin(addr0, Pin.OUT)
|
|
self.addr1_pin = Pin(addr1, Pin.OUT) if addr1 is not None else None
|
|
self.addr2_pin = Pin(addr2, Pin.OUT) if addr2 is not None else None
|
|
self.en_pin = Pin(en, Pin.OUT) if en is not None else None
|
|
self.max_address = 0b001
|
|
if addr1 is not None:
|
|
self.max_address = 0b011
|
|
if addr2 is not None:
|
|
self.max_address = 0b111
|
|
self.pulls = [None] * (self.max_address + 1)
|
|
self.muxed_pin = muxed_pin
|
|
|
|
def select(self, address):
|
|
if address < 0:
|
|
raise ValueError("address is less than zero")
|
|
elif address > self.max_address:
|
|
raise ValueError("address is greater than number of available addresses")
|
|
else:
|
|
if self.muxed_pin and self.pulls[address] is None:
|
|
self.muxed_pin.init(Pin.IN, None)
|
|
|
|
self.addr0_pin.value(address & 0b001)
|
|
|
|
if self.addr1_pin is not None:
|
|
self.addr1_pin.value(address & 0b010)
|
|
|
|
if self.addr2_pin is not None:
|
|
self.addr2_pin.value(address & 0b100)
|
|
|
|
if self.en_pin is not None:
|
|
self.en_pin.value(1)
|
|
|
|
if self.muxed_pin and self.pulls[address] is not None:
|
|
self.muxed_pin.init(Pin.IN, self.pulls[address])
|
|
|
|
def disable(self):
|
|
if self.en_pin is not None:
|
|
self.en_pin.value(0)
|
|
else:
|
|
raise RuntimeError("there is no enable pin assigned to this mux")
|
|
|
|
def configure_pull(self, address, pull=None):
|
|
if address < 0:
|
|
raise ValueError("address is less than zero")
|
|
elif address > self.max_address:
|
|
raise ValueError("address is greater than number of available addresses")
|
|
else:
|
|
self.pulls[address] = pull
|
|
|
|
def read(self):
|
|
if self.muxed_pin is not None:
|
|
return self.muxed_pin.value()
|
|
else:
|
|
raise RuntimeError("there is no muxed pin assigned to this mux")
|
|
|
|
|
|
class Button:
|
|
def __init__(self, button, invert=True, repeat_time=200, hold_time=1000):
|
|
self.invert = invert
|
|
self.repeat_time = repeat_time
|
|
self.hold_time = hold_time
|
|
self.pin = Pin(button, pull=Pin.PULL_UP if invert else Pin.PULL_DOWN)
|
|
self.last_state = False
|
|
self.pressed = False
|
|
self.pressed_time = 0
|
|
|
|
def read(self):
|
|
current_time = time.ticks_ms()
|
|
state = self.raw()
|
|
changed = state != self.last_state
|
|
self.last_state = state
|
|
|
|
if changed:
|
|
if state:
|
|
self.pressed_time = current_time
|
|
self.pressed = True
|
|
self.last_time = current_time
|
|
return True
|
|
else:
|
|
self.pressed_time = 0
|
|
self.pressed = False
|
|
self.last_time = 0
|
|
|
|
if self.repeat_time == 0:
|
|
return False
|
|
|
|
if self.pressed:
|
|
repeat_rate = self.repeat_time
|
|
if self.hold_time > 0 and current_time - self.pressed_time > self.hold_time:
|
|
repeat_rate /= 3
|
|
if current_time - self.last_time > repeat_rate:
|
|
self.last_time = current_time
|
|
return True
|
|
|
|
return False
|
|
|
|
def raw(self):
|
|
if self.invert:
|
|
return not self.pin.value()
|
|
else:
|
|
return self.pin.value()
|
|
|
|
@property
|
|
def is_pressed(self):
|
|
return self.raw()
|
|
|
|
|
|
class RGBLED:
|
|
def __init__(self, r, g, b, invert=True):
|
|
self.invert = invert
|
|
self.led_r = PWM(Pin(r))
|
|
self.led_r.freq(1000)
|
|
self.led_g = PWM(Pin(g))
|
|
self.led_g.freq(1000)
|
|
self.led_b = PWM(Pin(b))
|
|
self.led_b.freq(1000)
|
|
|
|
def set_rgb(self, r, g, b):
|
|
if self.invert:
|
|
r = 255 - r
|
|
g = 255 - g
|
|
b = 255 - b
|
|
self.led_r.duty_u16(int((r * 65535) / 255))
|
|
self.led_g.duty_u16(int((g * 65535) / 255))
|
|
self.led_b.duty_u16(int((b * 65535) / 255))
|
|
|
|
|
|
# A simple class for handling Proportional, Integral & Derivative (PID) control calculations
|
|
class PID:
|
|
def __init__(self, kp, ki, kd, sample_rate):
|
|
self.kp = kp
|
|
self.ki = ki
|
|
self.kd = kd
|
|
self.setpoint = 0
|
|
self._error_sum = 0
|
|
self._last_value = 0
|
|
self._sample_rate = sample_rate
|
|
|
|
def calculate(self, value, value_change=None):
|
|
error = self.setpoint - value
|
|
self._error_sum += error * self._sample_rate
|
|
if value_change is None:
|
|
rate_error = (value - self._last_value) / self._sample_rate
|
|
else:
|
|
rate_error = value_change
|
|
self._last_value = value
|
|
|
|
return (error * self.kp) + (self._error_sum * self.ki) - (rate_error * self.kd)
|
|
|
|
|
|
class Buzzer:
|
|
def __init__(self, pin):
|
|
self.pwm = PWM(Pin(pin))
|
|
|
|
def set_tone(self, freq, duty=0.5):
|
|
if freq < 50.0: # uh... https://github.com/micropython/micropython/blob/af64c2ddbd758ab6bac0fcca94c66d89046663be/ports/rp2/machine_pwm.c#L105-L119
|
|
self.pwm.duty_u16(0)
|
|
return False
|
|
|
|
self.pwm.freq(freq)
|
|
self.pwm.duty_u16(int(65535 * duty))
|
|
return True
|
|
|
|
|
|
class ShiftRegister:
|
|
def __init__(self, clk, lat, dat):
|
|
self.clk = Pin(clk, Pin.OUT)
|
|
self.lat = Pin(lat, Pin.OUT)
|
|
self.dat = Pin(dat, Pin.IN)
|
|
|
|
def __iter__(self):
|
|
self.lat.off()
|
|
self.lat.on()
|
|
for _ in range(8):
|
|
yield self.dat.value()
|
|
self.clk.on()
|
|
self.clk.off()
|
|
|
|
def __getitem__(self, k):
|
|
return list(self)[k]
|
|
|
|
def read(self):
|
|
out = 0
|
|
for bit in self:
|
|
out <<= 1
|
|
out += bit
|
|
return out
|
|
|
|
def is_set(self, mask):
|
|
return self.read() & mask == mask
|