432 lines
12 KiB
C++
432 lines
12 KiB
C++
#include <string.h>
|
|
#include <math.h>
|
|
|
|
#include "hardware/pwm.h"
|
|
#include "hardware/watchdog.h"
|
|
|
|
#include "badger2040.hpp"
|
|
|
|
namespace pimoroni {
|
|
|
|
void Badger2040::init() {
|
|
// set clock speed to 12MHz to reduce the maximum current draw on the
|
|
// battery. when updating a small, monochrome, display only every few
|
|
// seconds or so then you don't need much processing power anyway...
|
|
//set_sys_clock_khz(48000, true);
|
|
|
|
gpio_set_function(ENABLE_3V3, GPIO_FUNC_SIO);
|
|
gpio_set_dir(ENABLE_3V3, GPIO_OUT);
|
|
gpio_put(ENABLE_3V3, 1);
|
|
|
|
gpio_set_function(A, GPIO_FUNC_SIO);
|
|
gpio_set_dir(A, GPIO_IN);
|
|
gpio_set_pulls(A, false, true);
|
|
|
|
gpio_set_function(B, GPIO_FUNC_SIO);
|
|
gpio_set_dir(B, GPIO_IN);
|
|
gpio_set_pulls(B, false, true);
|
|
|
|
gpio_set_function(C, GPIO_FUNC_SIO);
|
|
gpio_set_dir(C, GPIO_IN);
|
|
gpio_set_pulls(C, false, true);
|
|
|
|
gpio_set_function(D, GPIO_FUNC_SIO);
|
|
gpio_set_dir(D, GPIO_IN);
|
|
gpio_set_pulls(D, false, true);
|
|
|
|
gpio_set_function(E, GPIO_FUNC_SIO);
|
|
gpio_set_dir(E, GPIO_IN);
|
|
gpio_set_pulls(E, false, true);
|
|
|
|
gpio_set_function(USER, GPIO_FUNC_SIO);
|
|
gpio_set_dir(USER, GPIO_IN);
|
|
gpio_set_pulls(USER, true, false);
|
|
|
|
gpio_set_function(VBUS_DETECT, GPIO_FUNC_SIO);
|
|
gpio_set_dir(VBUS_DETECT, GPIO_IN);
|
|
gpio_put(VBUS_DETECT, 1);
|
|
|
|
// read initial button states
|
|
uint32_t mask = (1UL << A) | (1UL << B) | (1UL << C) | (1UL << D) | (1UL << E);
|
|
_wake_button_states |= gpio_get_all() & mask;
|
|
|
|
/*
|
|
// wait for button to be released before continuing
|
|
while(gpio_get_all() & mask) {
|
|
tight_loop_contents();
|
|
}
|
|
*/
|
|
|
|
// led control pin
|
|
pwm_config cfg = pwm_get_default_config();
|
|
pwm_set_wrap(pwm_gpio_to_slice_num(LED), 65535);
|
|
pwm_init(pwm_gpio_to_slice_num(LED), &cfg, true);
|
|
gpio_set_function(LED, GPIO_FUNC_PWM);
|
|
led(0);
|
|
|
|
uc8151.init();
|
|
|
|
// TODO: set default image?
|
|
}
|
|
|
|
void Badger2040::halt() {
|
|
gpio_put(ENABLE_3V3, 0);
|
|
|
|
// If running on USB we will not actually power down, so emulate the behaviour
|
|
// of battery powered badge by listening for a button press and then resetting
|
|
// Note: Don't use wait_for_press as that waits for the button to be release and
|
|
// we want the reboot to complete before the button is released.
|
|
update_button_states();
|
|
while(_button_states == 0) {
|
|
update_button_states();
|
|
}
|
|
watchdog_reboot(0, 0, 0);
|
|
}
|
|
|
|
uint8_t _dither_value(int32_t x, int32_t y, uint8_t p) {
|
|
// ordered dither matrix used in 4-bit mode
|
|
static uint8_t _odm[16] = {
|
|
0, 8, 2, 10,
|
|
12, 4, 14, 6,
|
|
3, 11, 1, 9,
|
|
15, 7, 13, 5
|
|
};
|
|
|
|
// calculate dither matrix offset
|
|
uint32_t dmo = (x & 0b11) | ((y & 0b11) << 2);
|
|
|
|
if(p == 0) {
|
|
return 1;
|
|
}else if(p == 15) {
|
|
return 0;
|
|
}else{
|
|
return p <= _odm[dmo] ? 1 : 0;
|
|
}
|
|
}
|
|
|
|
void Badger2040::clear() {
|
|
const uint32_t column_len = 128 / 8;
|
|
const uint32_t buf_len = column_len * 296;
|
|
uint8_t* buf = uc8151.get_frame_buffer();
|
|
|
|
if (_pen == 0) {
|
|
memset(buf, 0xff, buf_len);
|
|
}
|
|
else if (_pen == 15) {
|
|
memset(buf, 0, buf_len);
|
|
}
|
|
else {
|
|
for(uint32_t x = 0; x < 296; x++) {
|
|
uint8_t val = 0;
|
|
for (uint32_t y = 0; y < 8; y++) {
|
|
val |= _dither_value(x, y, _pen) << y;
|
|
}
|
|
memset(buf, val, column_len);
|
|
buf += column_len;
|
|
}
|
|
}
|
|
}
|
|
|
|
void Badger2040::pixel(int32_t x, int32_t y) {
|
|
if(_thickness == 1) {
|
|
uc8151.pixel(x, y, _dither_value(x, y, _pen));
|
|
}else{
|
|
uint8_t ht = _thickness / 2;
|
|
for(int sy = 0; sy < _thickness; sy++) {
|
|
for(int sx = 0; sx < _thickness; sx++) {
|
|
uc8151.pixel(x + sx - ht, y + sy - ht, _dither_value(x + sx - ht, y + sy - ht, _pen));
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
// Display a portion of an image (icon sheet) at dx, dy
|
|
void Badger2040::icon(const uint8_t *data, int sheet_width, int icon_size, int index, int dx, int dy) {
|
|
image(data, sheet_width, icon_size * index, 0, icon_size, icon_size, dx, dy);
|
|
}
|
|
|
|
// Display an image that fills the screen (296*128)
|
|
void Badger2040::image(const uint8_t* data) {
|
|
uint8_t* ptr = uc8151.get_frame_buffer();
|
|
|
|
for (uint32_t x = 0; x < 296; ++x) {
|
|
// extract bitmask for this pixel
|
|
uint32_t bm = 0b10000000 >> (x & 0b111);
|
|
|
|
for (uint32_t y = 0; y < 128; y += 8) {
|
|
uint8_t val = 0;
|
|
for (uint32_t cy = 0; cy < 8; ++cy) {
|
|
// work out byte offset in source data
|
|
uint32_t o = ((y + cy) * (296 >> 3)) + (x >> 3);
|
|
|
|
// Set bit in val if set in source data
|
|
if (data[o] & bm) {
|
|
val |= 1 << cy;
|
|
}
|
|
}
|
|
*ptr++ = val;
|
|
}
|
|
}
|
|
}
|
|
|
|
// Display an image smaller than the screen (sw*sh) at dx, dy
|
|
void Badger2040::image(const uint8_t *data, int w, int h, int x, int y) {
|
|
image(data, w, 0, 0, w, h, x, y);
|
|
}
|
|
|
|
void Badger2040::image(const uint8_t *data, int stride, int sx, int sy, int dw, int dh, int dx, int dy) {
|
|
for(auto y = 0; y < dh; y++) {
|
|
for(auto x = 0; x < dw; x++) {
|
|
// work out byte offset in source data
|
|
uint32_t o = ((y + sy) * (stride >> 3)) + ((x + sx) >> 3);
|
|
|
|
// extract bitmask for this pixel
|
|
uint32_t bm = 0b10000000 >> ((x + sx) & 0b111);
|
|
|
|
// draw the pixel
|
|
uc8151.pixel(dx + x, dy + y, data[o] & bm);
|
|
}
|
|
}
|
|
}
|
|
|
|
void Badger2040::rectangle(int32_t x, int32_t y, int32_t w, int32_t h) {
|
|
if (h >= 8 && (_pen == 0 || _pen == 15)) {
|
|
// Directly write to the frame buffer when clearing a large area
|
|
uint8_t* buf = uc8151.get_frame_buffer();
|
|
|
|
for(int cx = x; cx < x + w; cx++) {
|
|
uint8_t* buf_ptr = &buf[cx * 16 + y / 8];
|
|
uint8_t first_val = 0xff >> (y & 7);
|
|
uint8_t last_val = 0xff >> ((y + h) & 7);
|
|
|
|
if (_pen == 0) {
|
|
*buf_ptr++ |= first_val;
|
|
for (int32_t c = h - (8 - (y & 7)); c >= 8; c -= 8) {
|
|
*buf_ptr++ = 0xff;
|
|
}
|
|
*buf_ptr |= ~last_val;
|
|
}
|
|
else {
|
|
*buf_ptr++ &= ~first_val;
|
|
for (int32_t c = h - (8 - (y & 7)); c >= 8; c -= 8) {
|
|
*buf_ptr++ = 0;
|
|
}
|
|
*buf_ptr &= last_val;
|
|
}
|
|
}
|
|
}
|
|
else {
|
|
for(int cx = x; cx < x + w; cx++) {
|
|
for(int cy = y; cy < y + h; cy++) {
|
|
uc8151.pixel(cx, cy, _dither_value(cx, cy, _pen));
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
void Badger2040::line(int32_t x1, int32_t y1, int32_t x2, int32_t y2) {
|
|
int32_t x = x1, y = y1, dx, dy, incx, incy, balance;
|
|
|
|
if(x2 >= x1) {dx = x2 - x1; incx = 1;} else {dx = x1 - x2; incx = -1;}
|
|
if(y2 >= y1) {dy = y2 - y1; incy = 1;} else {dy = y1 - y2; incy = -1;}
|
|
|
|
if(dx >= dy) {
|
|
dy <<= 1; balance = dy - dx; dx <<= 1;
|
|
while(x != x2) {
|
|
pixel(x, y);
|
|
if (balance >= 0) {y += incy; balance -= dx;}
|
|
balance += dy; x += incx;
|
|
}
|
|
} else {
|
|
dx <<= 1; balance = dx - dy; dy <<= 1;
|
|
while(y != y2) {
|
|
pixel(x, y);
|
|
if(balance >= 0) {x += incx; balance -= dy;}
|
|
balance += dx; y += incy;
|
|
}
|
|
}
|
|
}
|
|
|
|
void Badger2040::debug_command(uint8_t reg, size_t len, const uint8_t *data) {
|
|
uc8151.command(reg, len, data);
|
|
}
|
|
|
|
void Badger2040::dump_otp(uint8_t *data) {
|
|
uc8151.read(0xa2, 0xFFF, data);
|
|
}
|
|
|
|
void Badger2040::update_button_states() {
|
|
uint32_t mask = (1UL << A) | (1UL << B) | (1UL << C) | (1UL << D) | (1UL << E) | (1UL << USER);
|
|
_button_states = gpio_get_all() & mask;
|
|
_button_states ^= (1UL << USER); // USER button state is inverted
|
|
}
|
|
|
|
uint32_t Badger2040::button_states() {
|
|
return _button_states;
|
|
}
|
|
|
|
bool Badger2040::is_busy() {
|
|
return uc8151.is_busy();
|
|
}
|
|
|
|
void Badger2040::power_off() {
|
|
uc8151.power_off();
|
|
}
|
|
|
|
void Badger2040::invert(bool invert) {
|
|
uc8151.invert(invert);
|
|
}
|
|
|
|
void Badger2040::update_speed(uint8_t speed) {
|
|
uc8151.update_speed(speed);
|
|
}
|
|
|
|
uint32_t Badger2040::update_time() {
|
|
return uc8151.update_time();
|
|
}
|
|
|
|
void Badger2040::partial_update(int x, int y, int w, int h, bool blocking) {
|
|
uc8151.partial_update(x, y, w, h, blocking);
|
|
}
|
|
|
|
void Badger2040::update(bool blocking) {
|
|
uc8151.update(blocking);
|
|
}
|
|
|
|
const hershey_font_glyph_t* Badger2040::glyph_data(unsigned char c) {
|
|
if(c < 32 || c > 127) {
|
|
return nullptr;
|
|
}
|
|
|
|
return &_font->chars[c - 32];
|
|
}
|
|
|
|
inline float deg2rad(float degrees) {
|
|
return (degrees * M_PI) / 180.0f;
|
|
}
|
|
|
|
int32_t Badger2040::glyph(unsigned char c, int32_t x, int32_t y, float s, float a) {
|
|
const hershey_font_glyph_t *gd = glyph_data(c);
|
|
|
|
// if glyph data not found (id too great) then skip
|
|
if(!gd) {
|
|
return 0;
|
|
}
|
|
|
|
a = deg2rad(a);
|
|
float as = sin(a);
|
|
float ac = cos(a);
|
|
|
|
const int8_t *pv = gd->vertices;
|
|
int8_t cx = (*pv++) * s;
|
|
int8_t cy = (*pv++) * s;
|
|
bool pen_down = true;
|
|
|
|
for(uint32_t i = 1; i < gd->vertex_count; i++) {
|
|
if(pv[0] == -128 && pv[1] == -128) {
|
|
pen_down = false;
|
|
pv += 2;
|
|
}else{
|
|
int8_t nx = (*pv++) * s;
|
|
int8_t ny = (*pv++) * s;
|
|
|
|
int rcx = (cx * ac - cy * as) + 0.5f;
|
|
int rcy = (cx * as + cy * ac) + 0.5f;
|
|
|
|
int rnx = (nx * ac - ny * as) + 0.5f;
|
|
int rny = (nx * as + ny * ac) + 0.5f;
|
|
|
|
if(pen_down) {
|
|
line(rcx + x, rcy + y, rnx + x, rny + y);
|
|
}
|
|
|
|
cx = nx;
|
|
cy = ny;
|
|
pen_down = true;
|
|
}
|
|
}
|
|
|
|
return gd->width * s;
|
|
}
|
|
|
|
void Badger2040::text(std::string message, int32_t x, int32_t y, float s, float a) {
|
|
int32_t cx = x;
|
|
int32_t cy = y;
|
|
|
|
int32_t ox = 0;
|
|
|
|
float as = sin(deg2rad(a));
|
|
float ac = cos(deg2rad(a));
|
|
|
|
for(auto &c : message) {
|
|
int rcx = (ox * ac) + 0.5f;
|
|
int rcy = (ox * as) + 0.5f;
|
|
|
|
ox += glyph(c, cx + rcx, cy + rcy, s, a);
|
|
}
|
|
}
|
|
|
|
int32_t Badger2040::measure_text(std::string message, float s) {
|
|
int32_t width = 0;
|
|
for(auto &c : message) {
|
|
width += measure_glyph(c, s);
|
|
}
|
|
return width;
|
|
}
|
|
|
|
int32_t Badger2040::measure_glyph(unsigned char c, float s) {
|
|
const hershey_font_glyph_t *gd = glyph_data(c);
|
|
|
|
// if glyph data not found (id too great) then skip
|
|
if(!gd) {
|
|
return 0;
|
|
}
|
|
|
|
return gd->width * s;
|
|
}
|
|
|
|
|
|
void Badger2040::font(std::string name) {
|
|
// check that font exists and assign it
|
|
if(fonts.find(name) != fonts.end()) {
|
|
_font = fonts[name];
|
|
}
|
|
}
|
|
|
|
void Badger2040::pen(uint8_t pen) {
|
|
_pen = pen;
|
|
}
|
|
|
|
void Badger2040::thickness(uint8_t thickness) {
|
|
_thickness = thickness;
|
|
}
|
|
|
|
void Badger2040::led(uint8_t brightness) {
|
|
// set the led brightness from 1 to 256 with gamma correction
|
|
float gamma = 2.8;
|
|
uint16_t v = (uint16_t)(pow((float)(brightness) / 256.0f, gamma) * 65535.0f + 0.5f);
|
|
pwm_set_gpio_level(LED, v);
|
|
}
|
|
|
|
bool Badger2040::pressed(uint8_t button) {
|
|
return (_button_states & (1UL << button)) != 0;
|
|
}
|
|
|
|
bool Badger2040::pressed_to_wake(uint8_t button) {
|
|
return (_wake_button_states & (1UL << button)) != 0;
|
|
}
|
|
|
|
void Badger2040::wait_for_press() {
|
|
update_button_states();
|
|
while(_button_states == 0) {
|
|
update_button_states();
|
|
tight_loop_contents();
|
|
}
|
|
|
|
uint32_t mask = (1UL << A) | (1UL << B) | (1UL << C) | (1UL << D) | (1UL << E);
|
|
while(gpio_get_all() & mask) {
|
|
tight_loop_contents();
|
|
}
|
|
}
|
|
}
|