119 lines
4.5 KiB
C++
119 lines
4.5 KiB
C++
#include "bme68x.hpp"
|
|
#include "pico/stdlib.h"
|
|
|
|
namespace pimoroni {
|
|
bool BME68X::init() {
|
|
int8_t result = 0;
|
|
|
|
if(interrupt != PIN_UNUSED) {
|
|
gpio_set_function(interrupt, GPIO_FUNC_SIO);
|
|
gpio_set_dir(interrupt, GPIO_IN);
|
|
gpio_pull_up(interrupt);
|
|
}
|
|
|
|
device.intf_ptr = new i2c_intf_ptr{.i2c = i2c, .address = address};
|
|
|
|
device.intf = bme68x_intf::BME68X_I2C_INTF;
|
|
device.read = (bme68x_read_fptr_t)&read_bytes;
|
|
device.write = (bme68x_write_fptr_t)&write_bytes;
|
|
device.delay_us = (bme68x_delay_us_fptr_t)&delay_us;
|
|
device.amb_temp = 20;
|
|
|
|
result = bme68x_init(&device);
|
|
bme68x_check_rslt("bme68x_init", result);
|
|
if(result != BME68X_OK) return false;
|
|
|
|
result = bme68x_get_conf(&conf, &device);
|
|
bme68x_check_rslt("bme68x_get_conf", result);
|
|
if(result != BME68X_OK) return false;
|
|
|
|
configure(BME68X_FILTER_OFF, BME68X_ODR_NONE, BME68X_OS_16X, BME68X_OS_1X, BME68X_OS_2X);
|
|
|
|
return true;
|
|
}
|
|
|
|
bool BME68X::configure(uint8_t filter, uint8_t odr, uint8_t os_humidity, uint8_t os_pressure, uint8_t os_temp) {
|
|
int8_t result = 0;
|
|
|
|
conf.filter = filter;
|
|
conf.odr = odr;
|
|
conf.os_hum = os_humidity;
|
|
conf.os_pres = os_pressure;
|
|
conf.os_temp = os_temp;
|
|
|
|
bme68x_set_conf(&conf, &device);
|
|
bme68x_check_rslt("bme68x_set_conf", result);
|
|
if(result != BME68X_OK) return false;
|
|
|
|
return true;
|
|
}
|
|
|
|
bool BME68X::read_forced(bme68x_data *data, uint16_t heater_temp, uint16_t heater_duration) {
|
|
int8_t result = 0;
|
|
uint8_t n_fields;
|
|
uint32_t delay_period;
|
|
|
|
heatr_conf.enable = BME68X_ENABLE;
|
|
heatr_conf.heatr_temp = heater_temp;
|
|
heatr_conf.heatr_dur = heater_duration;
|
|
result = bme68x_set_heatr_conf(BME68X_FORCED_MODE, &heatr_conf, &device);
|
|
bme68x_check_rslt("bme68x_set_heatr_conf", result);
|
|
if(result != BME68X_OK) return false;
|
|
|
|
result = bme68x_set_op_mode(BME68X_FORCED_MODE, &device);
|
|
bme68x_check_rslt("bme68x_set_op_mode", result);
|
|
if(result != BME68X_OK) return false;
|
|
|
|
delay_period = bme68x_get_meas_dur(BME68X_FORCED_MODE, &conf, &device) + (heatr_conf.heatr_dur * 1000);
|
|
// Could probably just call sleep_us here directly, I guess the API uses this internally
|
|
device.delay_us(delay_period, device.intf_ptr);
|
|
|
|
result = bme68x_get_data(BME68X_FORCED_MODE, data, &n_fields, &device);
|
|
bme68x_check_rslt("bme68x_get_data", result);
|
|
if(result != BME68X_OK) return false;
|
|
|
|
return true;
|
|
}
|
|
|
|
/*
|
|
Will read profile_length results with the given temperatures and duration multipliers into the results array.
|
|
Blocks until it has a valid result for each temp/duration, and returns the entire set in the given order.
|
|
*/
|
|
bool BME68X::read_parallel(bme68x_data *results, uint16_t *profile_temps, uint16_t *profile_durations, size_t profile_length) {
|
|
int8_t result;
|
|
bme68x_data data[3]; // Parallel & Sequential mode read 3 simultaneous fields
|
|
uint8_t n_fields;
|
|
uint32_t delay_period;
|
|
|
|
heatr_conf.enable = BME68X_ENABLE;
|
|
heatr_conf.heatr_temp_prof = profile_temps;
|
|
heatr_conf.heatr_dur_prof = profile_durations;
|
|
heatr_conf.profile_len = profile_length;
|
|
heatr_conf.shared_heatr_dur = 140 - (bme68x_get_meas_dur(BME68X_PARALLEL_MODE, &conf, &device) / 1000);
|
|
result = bme68x_set_heatr_conf(BME68X_PARALLEL_MODE, &heatr_conf, &device);
|
|
bme68x_check_rslt("bme68x_set_heatr_conf", result);
|
|
if(result != BME68X_OK) return false;
|
|
|
|
result = bme68x_set_op_mode(BME68X_PARALLEL_MODE, &device);
|
|
bme68x_check_rslt("bme68x_set_op_mode", result);
|
|
if(result != BME68X_OK) return false;
|
|
|
|
while (1) {
|
|
delay_period = bme68x_get_meas_dur(BME68X_PARALLEL_MODE, &conf, &device) + (heatr_conf.shared_heatr_dur * 1000);
|
|
device.delay_us(delay_period, device.intf_ptr);
|
|
|
|
result = bme68x_get_data(BME68X_PARALLEL_MODE, data, &n_fields, &device);
|
|
if(result == BME68X_W_NO_NEW_DATA) continue;
|
|
bme68x_check_rslt("bme68x_get_data", result);
|
|
if(result != BME68X_OK) return false;
|
|
|
|
for(auto i = 0u; i < n_fields; i++) {
|
|
results[data[i].gas_index] = data[i];
|
|
|
|
if(data[i].gas_index == profile_length - 1) return true;
|
|
}
|
|
}
|
|
|
|
return true;
|
|
}
|
|
} |